Electrochemical DNA biosensor based on gold nanoparticles and partially reduced graphene oxide modified electrode for the detection of Listeria monocytogenes hly gene sequence

Investigation of the Efficacy of a Listeria monocytogenes Biosensor Using Chicken Broth Samples

Foodborne pathogens are microbes present in food that cause serious illness when the contaminated food is consumed. Among these pathogens, Listeria monocytogenes is one of the most serious bacterial pathogens, and causes severe illness. The techniques currently used for L. monocytogenes detection are based on common molecular biology tools that are not easy to implement for field use in food production and distribution facilities. This work focuses on the efficacy of an electrochemical biosensor in detecting L. monocytogenes in chicken broth. The sensor is based on a nanostructured electrode modified with a bacteriophage as a bioreceptor which selectively detects L. monocytogenes using electrochemical impedance spectroscopy. The biosensing platform was able to reach a limit of detection of 55 CFU/mL in 1× PBS buffer and 10 CFU/mL in 1% diluted chicken broth. The biosensor demonstrated 83-98% recovery rates in buffer and 87-96% in chicken broth.

Electrochemical DNA Sensor Designed Using the Pencil Graphite Electrode to Detect Listeria monocytogenes

In the present work, a novel electrochemical DNA sensor was designed to detect L. monocytogenes. Two different gene fragments were selected for the sensor design. One is a 702 bp long fragment of the hlyA gene, encoding the synthesis of listeriolysin O toxin, which is unique only to pathogenic strains of L. monocytogenes and is essential for pathogenicity. The other is a 209 bp long fragment of the 16 S RNA gene found in all species of the Listeria genus. As the working electrode, the pencil graphite electrode was modified in various ways (activated or covered with polypyrrole), and six different combinations were constituted using three types of the modified working electrode and two different gene fragments. The developed system is based on differential pulse voltammetric transduction of guanine oxidation after hybridization between the selected gene fragment (38 µg/mL) and the selected fragment-specific inosine-modified probe (1.8 µmol/L) immobilized on a pencil graphite electrode surface. The comparison of all combinations demonstrates that the best results are obtained with the combination formed from a polypyrrole-coated pencil graphite electrode (prepared at 2 scans) and 702 bp fragment of the hlyA gene. The analysis time is less than 1 hour, and the necessary DNA concentrations for the analysis have been determined as 8.2 × 10-11 M DNA and 2.7 × 10-10 M DNA respectively, for the hlyA gene and 16 S RNA gene.

Recent Advances in Electrochemical Biosensors for the Detection of Foodborne Pathogens: Current Perspective and Challenges

Foodborne pathogens cause many diseases and significantly impact human health and the economy. Foodborne pathogens mainly include Salmonella spp., Escherichia coli, Staphylococcus aureus, Shigella spp., Campylobacter spp. and Listeria monocytogenes, which are present in agricultural products, dairy products, animal-derived foods and the environment. Various pathogens in many different types of food and water can cause potentially life-threatening diseases and develop resistance to various types of antibiotics. The harm of foodborne pathogens is increasing, necessitating effective and efficient methods for early monitoring and detection. Traditional methods, such as real-time polymerase chain reaction (RT-PCR), enzyme-linked immunosorbent assay (ELISA) and culture plate, are time-consuming, labour-intensive and expensive and cannot satisfy the demands of rapid food testing. Therefore, new fast detection methods are urgently needed. Electrochemical biosensors provide consumer-friendly methods to quickly detect foodborne pathogens in food and the environment and achieve extensive accuracy and reproducible results. In this paper, by focusing on various mechanisms of electrochemical transducers, we present a comprehensive overview of electrochemical biosensors for the detection of foodborne pathogens. Furthermore, the review introduces the hazards of foodborne pathogens, risk analysis methods and measures of control. Finally, the review also emphasizes the recent research progress and solutions regarding the use of electrochemical biosensors to detect foodborne pathogens in food and the environment, evaluates limitations and challenges experienced during the development of biosensors to detect foodborne pathogens and discusses future possibilities.

Towards portable rapid TB biosensor: Detecting Mycobacterium tuberculosis in raw sputum samples using functionalized screen printed electrodes

Due to lack of robust, sensitive and low cost detection strategies, Tuberculosis (TB) remains a significant global health issue. WHO reports 1.5 million deaths per year, ∼80 % cases occur in low- to middle-income countries, where resource limitations complicate the diagnosis. Robust detection of TB infection is important to contain the spread and treat disease. We developed a label-free DNA biosensor based on commercially available screen printed electrodes (SPEs) (DropSens and Zensors) that can detect TB robustly, sensitively, and specifically via DNA hybridization with its IS6110 gene marker, in purified DNA and raw sputum samples. The fabricated biosensor was morphologically characterized by scanning electron microscopy coupled with energy dispersive X-ray spectroscopy. Cyclic voltammetry and Differential Pulse Voltammetry was used for electrochemical analysis of the modified electrode. The fabricated biosensor demonstrated satisfactory selectivity for Mycobacterium tuberculosis (MTB) against Salmonella typhimurium and Escherichia coli and was able to detect MTB; the limit of detection (LOD) of 1.90 nM with R² = 0.993, when analyzed over a range of concentrations of DNA (0.5-10 nM). It is being exploited to detect target MTB from clinical samples, without DNA purification. The approach is robust, sensitive, and specific, requires low sample volume and can be extended towards portable point of care diagnosis of TB.

Recent Advances in Microfluidics-Based Electrochemical Sensors for Foodborne Pathogen Detection

Using pathogen-infected food that can be unhygienic can result in severe diseases and an increase in mortality rate among humans. This may arise as a serious emergency problem if not appropriately restricted at this point of time. Thus, food science researchers are concerned with precaution, prevention, perception, and immunity to pathogenic bacteria. Expensive, elongated assessment time and the need for skilled personnel are some of the shortcomings of the existing conventional methods. Developing and investigating a rapid, low-cost, handy, miniature, and effective detection technology for pathogens is indispensable. In recent times, there has been a significant scope of interest for microfluidics-based three-electrode potentiostat sensing platforms, which have been extensively used for sustainable food safety exploration because of their progressively high selectivity and sensitivity. Meticulously, scholars have made noteworthy revolutions in signal enrichment tactics, measurable devices, and portable tools, which can be used as an allusion to food safety investigation. Additionally, a device for this purpose must incorporate simplistic working conditions, automation, and miniaturization. In order to meet the critical needs of food safety for on-site detection of pathogens, point-of-care testing (POCT) has to be introduced and integrated with microfluidic technology and electrochemical biosensors. This review critically discusses the recent literature, classification, difficulties, applications, and future directions of microfluidics-based electrochemical sensors for screening and detecting foodborne pathogens.

Electrochemical Biosensors as a Novel Platform in the Identification of Listeriosis Infection

Listeria monocytogenes (L.M.) is a gram-positive bacillus with wide distribution in the environment. This bacterium contaminates water sources and food products and can be transmitted to the human population. The infection caused by L.M. is called listeriosis and is common in pregnant women, immune-deficient patients, and older adults. Based on the released statistics, listeriosis has a high rate of hospitalization and mortality; thus, rapid and timely detection of food contamination and listeriosis cases is necessary. During the last few decades, biosensors have been used for the detection and monitoring of varied bacteria species. These devices are detection platforms with great sensitivity and low detection limits. Among different types of biosensors, electrochemical biosensors have a high capability to circumvent several drawbacks associated with the application of conventional laboratory techniques. In this review article, different electrochemical biosensor types used for the detection of listeriosis were discussed in terms of actuators, bioreceptors, specific working electrodes, and signal amplification. We hope that this review will facilitate researchers to access a complete and comprehensive template for pathogen detection based on the different formats of electrochemical biosensors.

Rapid and sensitive detection of box turtles using an electrochemical DNA biosensor based on a gold/graphene nanocomposite

The Southeast Asian box turtle, Cuora amboinensis, is an ecologically important endangered species which needs an onsite monitoring device to protect it from extinction. An electrochemical DNA biosensor was developed to detect the C. amboinensis mitochondrial cytochrome b gene based on an in silico designed probe using bioinformatics tools, and it was also validated in wet-lab experiments. As a detection platform, a screen-printed carbon electrode (SPCE) enhanced with a nanocomposite containing gold nanoparticles and graphene was used. The morphology of the nanoparticles was analysed by field-emission scanning electron microscopy and structural characteristics were analysed by using energy-dispersive X-ray, UV-vis, and Fourier-transform infrared spectroscopy. The electrochemical characteristics of the modified electrodes were studied by cyclic voltammetry, differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy. The thiol-modified synthetic DNA probe was immobilised on modified SPCEs to facilitate hybridisation with the reverse complementary DNA. The turtle DNA was distinguished based on hybridisation-induced electrochemical change in the presence of methylene blue compared to their mismatches, noncomplementary, and nontarget species DNA measured by DPV. The developed biosensor exhibited a selective response towards reverse complementary DNAs and was able to discriminate turtles from other species. The modified electrode displayed good linearity for reverse complementary DNAs in the range of 1 × 10-11-5 × 10-6 M with a limit of detection of 0.85 × 10-12 M. This indicates that the proposed biosensor has the potential to be applied for the detection of real turtle species.

Tuberculosis detection from raw sputum samples using Au-electroplated screen-printed electrodes as E-DNA sensor

Tuberculosis (TB) remains a leading cause of death globally, especially in underdeveloped nations. The main impediment to TB eradication is a lack of efficient diagnostic tools for disease diagnosis. In this work, label free and ultrasensitive electrochemical DNA biosensor for detecting Mycobacterium tuberculosis has been developed based on the electrodeposition of gold nanoparticles on the surface of carbon screen-printed carbon electrode (Zensors) for signal amplification. Particularly, screen-printed electrodes were modified by electrochemical deposition of Au to enhance the conductivity and facilitate the immobilization of ssDNA probes via Au-S bonds. The electrochemically modified SPEs were characterized using Scanning electron microscopy/Energy Dispersive X-Ray Analysis (SEM/EDX) and X-Ray Diffraction (XRD). Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques were used to investigate the DNA hybridization between single-stranded (ssDNA) probe and target DNA (tDNA). Under the ideal conditions, DPV exhibited a correlation coefficient R2 = 0.97, when analyzed with different tDNA concentrations. The proposed DNA biosensor exhibits a good detection range from 2 to 10 nm with a low detection limit of 1.91 nm, as well as high selectivity that, under ideal conditions, distinguishes non-complementary DNA from perfectly matched tDNA. By eliminating the need for DNA purification, this work paves the path for creating disposable biosensors capable of detecting DNA from raw sputum samples.

Graphene and Its Derivatives: Synthesis and Application in the Electrochemical Detection of Analytes in Sweat

Wearable sensors and invasive devices have been studied extensively in recent years as the demand for real-time human healthcare applications and seamless human-machine interaction has risen exponentially. An explosion in sensor research throughout the globe has been ignited by the unique features such as thermal, electrical, and mechanical properties of graphene. This includes wearable sensors and implants, which can detect a wide range of data, including body temperature, pulse oxygenation, blood pressure, glucose, and the other analytes present in sweat. Graphene-based sensors for real-time human health monitoring are also being developed. This review is a comprehensive discussion about the properties of graphene, routes to its synthesis, derivatives of graphene, etc. Moreover, the basic features of a biosensor along with the chemistry of sweat are also discussed in detail. The review mainly focusses on the graphene and its derivative-based wearable sensors for the detection of analytes in sweat. Graphene-based sensors for health monitoring will be examined and explained in this study as an overview of the most current innovations in sensor designs, sensing processes, technological advancements, sensor system components, and potential hurdles. The future holds great opportunities for the development of efficient and advanced graphene-based sensors for the detection of analytes in sweat.

Emerging bioanalytical sensors for rapid and close-to-real-time detection of priority abiotic and biotic stressors in aquaculture and culture-based fisheries

Abiotic stresses of various chemical contamination of physical, inorganic, organic and biotoxin origin and biotic stresses of bacterial, viral, parasitic and fungal origins are the significant constraints in achieving higher aquaculture production. Testing and rapid detection of these chemical and microbial contaminants are crucial in identifying and mitigating abiotic and biotic stresses, which has become one of the most challenging aspects in aquaculture and culture-based fisheries. The classical analytical techniques, including titrimetric methods, spectrophotometric, mass spectrometric, spectroscopic, and chromatographic techniques, are tedious and sometimes inaccessible when required. The development of novel and improved bioanalytical methods for rapid, selective and sensitive detection is a wide and dynamic field of research. Biosensors offer precise detection of biotic and abiotic stressors in aquaculture and culture-based fisheries within no time. This review article allows filling the knowledge gap for detection and monitoring of chemical and microbial contaminants of abiotic and biotic origin in aquaculture and culture-based fisheries using nano(bio-) analytical technologies, including nano(bio-)molecular and nano(bio-)sensing techniques.

Biosensors, modern technology for the detection of cancer-associated bacteria

Cancer is undoubtedly one of the major human challenges worldwide. A number of pathogenic bacteria are deemed to be potentially associated with the disease. Accordingly, accurate and specific identification of cancer-associated bacteria can play an important role in cancer control and prevention. A variety of conventional methods such as culture, serology, and molecular-based methods as well as PCR and real-time PCR have been adopted to identify bacteria. However, supply costs, machinery fees, training expenses, consuming time, and the need for advanced equipment are the main problems with the old methods. As a result, advanced and modern techniques are being developed to overcome the disadvantages of conventional methods. Biosensor technology is one of the innovative methods that has been the focus of researchers due to its numerous advantages. The main purpose of this study is to provide an overview of the latest developed biosensors for recognizing the paramount cancer-associated bacteria.

A novel electrochemical sandwich-like immunosensor based on carboxyl Ti3C2Tx MXene and rhodamine b/gold/reduced graphene oxide for Listeria monocytogenes

Listeria monocytogenes (LM) is one of the most common food-borne pathogens and can induce a series of diseases with a high mortality rate to humans; hence, it is very necessary to develop a highly sensitive method for LM detection. Based on this need, a new sandwich-like electrochemical immunosensing platform was developed herein by preparing carboxyl Ti₃C₂T_x MXene (C-Ti₃C₂T_x MXene) as the sensing platform and rhodamine b/gold/reduced graphene oxide (RhB/Au/RGO) as the signal amplifier. The high conductivity and large surface area of C-Ti₃C₂T_x MXene make it a desirable nanomaterial to fix the primary antibody of LM (PAb), while the prepared Au/RGO/RhB nanohybrid is dedicated to assembling the secondary antibody (SAb) of LM, offering an amplified response signal. Through the use of RhB molecule as the signal probe, the experiments showed that the peak currents of RhB increase along with an increase in the concentration of LM from 10 to 10⁵ CFU mL^-1, and an extremely low limit of detection (2 CFU mL^-1) was obtained on the basis of the proposed immunosensing platform after optimizing various conditions. Hence, it is confirmed that the developed sandwich-like immunosensor based on C-Ti₃C₂T_x MXene and RhB/Au/Gr has great application in the detection of LM and other analytes.

Highly Sensitive Electrochemical Immunosensing for Listeria Monocytogenes Based on 3,4,9,10-Perylene Tetracarboxylic Acid/Graphene Ribbons as a Sensing Platform and Ferrocene/Gold Nanoparticles as an Amplifier

As a gram-positive foodborne pathogen, Listeria monocytogenes (LM) can cause many serious diseases to the human health coupled with high mortality rates; thus, constructing an effective method to detect LM is of great significance. Herein, a novel sandwich-type electrochemical immunosensor is proposed for LM by introducing 3,4,9,10-perylene tetracarboxylic acid/graphene ribbons (PTCA/GNR) nanohybrids as a sensing platform and ferrocene/gold nanoparticles (Fc/Au NPs) as a signal amplifier. The high conductivity and large surface area of GNR can increase the immobilizing amount of the primary antibody (PAb) and enhance the electron transport rate, while Au NPs can carry secondary antibodies (SAb) and Fc derivative (Fc-SH) to form a SAb-Au NPs-Fc signal amplifier. Through using Fc molecules as a signal probe, its peak current can appear and increase varied from the LM concentrations; hence, a highly sensitive sandwich-type immunosensor was constructed wide linear range from 10 to 2 × 10⁴-CFU mL^-1 and low limit of detection of low to 6 CFU mL^-1. Furthermore, the specificity of the immunosensor was also studied and a satisfactory result was obtained.

Nucleic acid-based electrochemical biosensor: Recent advances in probe immobilization and signal amplification strategies

With the increasing importance of accurate and early disease diagnosis and the development of personalized medicine, DNA-based electrochemical biosensor has attracted broad scientific and clinical interests in the past decades due to its unique hybridization specificity, fast response time, and potential for miniaturization. In order to achieve high detection sensitivity, the design of DNA electrochemical biosensors depends critically on the improvement of the accessibility of target molecules and the enhancement of signal readout. Here, we summarize the recent advances in DNA probe immobilization and signal amplification strategies with a special focus on DNA nanostructure-supported DNA probe immobilization method, which provides the opportunity to rationally control the distance between probes and keep them in upright confirmation, as well as the contribution of functional nanomaterials in enhancing the signal amplification. The next challenge of biosensors will be the fabrication of point-of-care devices for clinical testing. The advancement of multidisciplinary areas, including nanofabrication, material science, and biochemistry, has exhibited profound promise in achieving such portable sensing devices. This article is categorized under: Diagnostic Tools > Biosensing Diagnostic Tools > Diagnostic Nanodevices Biology-Inspired Nanomaterials > Nucleic Acid-Based Structures.

Simple electrochemical detection of Listeria monocytogenes based on a surface-imprinted polymer-modified electrode

Listeria monocytogenes (LM) is a foodborne pathogen, and it can pose a risk of serious diseases to the human health. Hence, the development of an effective method for the detection of LM is very important. In this study, by selecting LM as the template and 3-thiopheneacetic acid as the functional monomer, an LM-imprinted polymer (LIP)-based sensor was proposed for the first time to detect LM by electropolymerizing TPA on the glassy carbon electrode (GCE) surface in the presence of LM. After the removal of the LM template from the electrode surface, the obtained sensor was denoted as LIP/GCE, which could effectively recognize and capture LM cells. By using [Fe(CN)₆]^4-/3- as the probe, its peak current at LIP/GCE could be restricted when the LM cells were captured into the imprinted cavity of LIP/GCE, and the current value decreased with an increase in the LM concentration. Serious conditions were optimized for achieving highly sensitive detection, and a low detection limit (6 CFU mL^-1) coupled with a wide linear range (10 to 10⁶ CFU mL^-1) was obtained for LM. Finally, the inter-electrode reproducibility, stability, selectivity, and applicability of LIP/GCE were also investigated, and the obtained results were acceptable.

Evolution of nucleic acids biosensors detection limit III

This review is an update of two previous ones focusing on the limit of detection of electrochemical nucleic acid biosensors allowing direct detection of nucleic acid target (miRNA, mRNA, DNA) after hybridization event. A classification founded on the nature of the electrochemical transduction pathway is established. It provides an overall picture of the detection limit evolution of the various sensor architectures developed during the last three decades and a critical report of recent strategies.

Advances in Nanomaterials-Based Electrochemical Biosensors for Foodborne Pathogen Detection

Electrochemical biosensors utilizing nanomaterials have received widespread attention in pathogen detection and monitoring. Here, the potential of different nanomaterials and electrochemical technologies is reviewed for the development of novel diagnostic devices for the detection of foodborne pathogens and their biomarkers. The overview covers basic electrochemical methods and means for electrode functionalization, utilization of nanomaterials that include quantum dots, gold, silver and magnetic nanoparticles, carbon nanomaterials (carbon and graphene quantum dots, carbon nanotubes, graphene and reduced graphene oxide, graphene nanoplatelets, laser-induced graphene), metal oxides (nanoparticles, 2D and 3D nanostructures) and other 2D nanomaterials. Moreover, the current and future landscape of synergic effects of nanocomposites combining different nanomaterials is provided to illustrate how the limitations of traditional technologies can be overcome to design rapid, ultrasensitive, specific and affordable biosensors.

Recent Advances in Ionic Liquids in Biomedicine

The use of ionic liquids and deep eutectic solvents in biomedical applications has grown dramatically in recent years due to their unique properties and their inherent tunability. This review will introduce ionic liquids and deep eutectics and discuss their biomedical applications, namely solubilization of drugs, creation of active pharmaceutical ingredients, delivery of pharmaceuticals through biological barriers, stabilization of proteins and other nucleic acids, antibacterial agents, and development of new biosensors. Current challenges and future outlooks are discussed, including biocompatibility, the potential impact of the presence of impurities, and the importance of understanding the microscopic interactions in ionic liquids in order to design task-specific solvents.

Label-free E-DNA biosensor based on PANi-RGO-G*NPs for detection of cell-free fetal DNA in maternal blood and fetal gender determination in early pregnancy

In this study, a DYS14 aptamer/polyaniline-reduced graphene oxide-gold nanoparticles/gold (Apt/PANi-RGO-G*NPs/Au) electrode was fabricated to detect the Y-chromosome DYS14 DNA sequence in cffDNA in the blood plasma of pregnant women and used on real and laboratory samples with high success rate. The electrochemical properties of the prepared E-DNA biosensor were characterized by CV, SWV, XRD, and EIS. The E-DNA biosensor morphological characteristics were investigated by TEM, SEM, and EDX. Phosphorothioate was used to link the aptamer to PANi-RGO-G*NPs modified gold electrode. This is due to control of the adsorption polarity and increase adsorption stability. Under optimized conditions, the linear range of the analytical technique with respect to the logarithm of the target sequence concentration was 1.0 × 10^-16-1.0 × 10^-8 M, the detection limit was 4.26 × 10^-17 M, and the limit of quantitation was 1.422 × 10^-16 M. The E-DNA biosensor displayed high selectivity and sensitivity, high efficiency, and acceptable repeatability. For fetal sex detection, 12 pregnant women from the 5th to the 15th week of gestation participated in the study. Results indicated the fabricated Apt/PANi-RGO-G*NPs/Au E-DNA biosensor to be appropriate for fetal sex determination in pregnant women between the 7th and 9th week of gestation. Notably, this method can be used as a model for the study of pathogens like bacteria and viruses.

Amperometric aptasensor with sandwich-type architecture for troponin I based on carboxyethylsilanetriol-modified graphene oxide coated electrodes

A novel amperometric aptasensor for the specific detection of cardiac troponin I (cTnI) was constructed by using screen-printed carbon electrodes coated with a carboxyethylsilanetriol-modified graphene oxide derivative as transduction element. This novel carboxylic acid-enriched nanomaterial allows easy and high load immobilization of the capture aptamer molecules on the electrode surface. The biosensing interface was assembled by covalent attachment of an amino-functionalized DNA aptamer on the carboxylic acid-enriched electrode surface. The sensing approach relies on the specific recognition of cTnI by the aptamer and further assembly of a sandwich-type architecture with a novel aptamer-peroxidase conjugate as signaling element. The aptasensor was employed to detect the cardiac biomarker in the broad range from 1.0 pg/mL to 1.0 μg/mL with a detection limit of 0.6 pg/mL. This electroanalytical device also showed high specificity, reproducibility and stability, and was useful to quantify cTnI in reconstituted human serum samples.

Ionic liquids: prospects for nucleic acid handling and delivery

Operations with nucleic acids are among the main means of studying the mechanisms of gene function and developing novel methods of molecular medicine and gene therapy. These endeavours usually imply the necessity of nucleic acid storage and delivery into eukaryotic cells. In spite of diversity of the existing dedicated techniques, all of them have their limitations. Thus, a recent notion of using ionic liquids in manipulations of nucleic acids has been attracting significant attention lately. Due to their unique physicochemical properties, in particular, their micro-structuring impact and tunability, ionic liquids are currently applied as solvents and stabilizing media in chemical synthesis, electrochemistry, biotechnology, and other areas. Here, we review the current knowledge on interactions between nucleic acids and ionic liquids and discuss potential advantages of applying the latter in delivery of the former into eukaryotic cells.

Voltammetric Determination of Amoxicillin Using a Reduced Graphite Oxide Nanosheet Electrode

A reduced graphite oxide nanosheet electrode (RGOnS) was prepared as a sensor for amoxicillin (AMX) detection, an antibiotic commonly used in the livestock farm, by the square-wave adsorptive stripping voltammetry technique. Graphite oxide with nanosheet shape was produced from a graphite electrode by a chronoamperometry process at 5 V and then an electrochemical reduction process was carried out to form RGOnS with restored long-range conjugated networks and better conductivity. The electrodes were characterized by SEM, EDX, and FTIR spectroscopy. The RGOnS electrode prepared at an optimal reduction potential of -1 V for 120 s exhibits a larger electrochemical active surface area, and the obtained oxidation signal of AMX is approximately ten times higher than that of the pristine graphite electrode. The analytical conditions such as the pH of electrolyte and accumulation time were optimized. The calibration curve built under the optimal conditions provided a good linear relationship in the range of AMX concentration from 0.5-80 µM with the correlation coefficient of 0.9992. The limit of detection was calculated as 0.193 µM. Satisfactory results are obtained from the detection of the AMX in different samples using the prepared electrode.

PlcA-based nanofabricated electrochemical DNA biosensor for the detection of Listeria monocytogenes in raw milk samples

The electrochemical DNA biosensor has been developed for the detection of Listeria monocytogenes in raw milk samples. The electrochemical studies of the developed biosensor was recorded by cyclic voltammetry (CV) and electrochemical impedance (EI) using methylene blue (MB) and potassium ferricyanide K₃Fe(CN)^- ₆ as redox indicators. The selectivity of the developed biosensor was demonstrated using complementary and mismatch oligonucleotide sequences. The sensitivity (S) of the developed sensor was recorded as 3461 (μA/cm²)/ng and limit of detection (LOD) was found to be 82 fg/6 µl with the regression coefficient (R ²) 0.941 using CV. The sensor was characterized by field emission scanning electron microscopy (FE-SEM). The electrode was found to be stable for six months, with only 10% loss in the initial CV current.

Thermally stable and uniform DNA amplification with picosecond laser ablated graphene rapid thermal cycling device

Rapid thermal cycling (RTC) in an on-chip device can perform DNA amplification in vitro through precise thermal control at each step of the polymerase chain reaction (PCR). This study reports a straightforward fabrication technique for patterning an on-chip graphene-based device with hole arrays, in which the mechanism of surface structures can achieve stable and uniform thermal control for the amplification of DNA fragments. A thin-film based PCR device was fabricated using picosecond laser (PS-laser) ablation of the multilayer graphene (MLG). Under the optimal fluence of 4.72 J/cm2 with a pulse overlap of 66%, the MLG can be patterned with arrays of 250 μm2 hole surface structures. A 354-bp DNA fragment of VP1, an effective marker for diagnosing the BK virus, was amplified on an on-chip device in less than 60 min. A thin-film electrode with the aforementioned MLG as the heater was demonstrated to significantly enhance temperature stability for each stage of the thermal cycle. The temperature control of the heater was performed by means of a developed programmable PCR apparatus. Our results demonstrated that the proposed integration of a graphene-based device and a laser-pulse ablation process to form a thin-film PCR device has cost benefits in a small-volume reagent and holds great promise for practical medical use of DNA amplification.

Amperometric genosensor for culture independent bacterial count

Bacterial plate count for general assessment of water quality requires lengthy bacterial culturing. We report here a new DNA induced current genosensor for culture independent total bacteria determination. Since the amount of bacterial DNA is correlated to the number of bacteria, the genosensor measures the amount of bacterial DNA to determine bacterial count. The approach relies on bacteria lysis to release DNA which can react with molybdate to form redox molybdophosphate and measured electrochemically. Analysis of E. coli and S. aureus demonstrated that the DNA generated current is highly correlated with the level of bacteria lysis which was confirmed by spectrometric measurement. Culture independent measurement of S. aureus bacterial load suggests limit of detection is 21.9 CFU/mL, with linear range from 3×10² to 3×10⁷ CFU/mL and correlation coefficient of 0.992. For E. coli analysis, the detection limit is 25.1 CFU/mL with the same linear range. The use of electrochemical microbial DNA quantitation for culture independent bacterial count is a new approach, the genosensor measurement is rapid (within 1 h) and has potential use for analysis of broad-spectrum bacteria for various applications.

A Review: New Trends in Electrode Systems for Sensitive Drug and Biomolecule Analysis

Drug and biomolecule analysis with high precision, fast response, not expensive, and user-friendly methods have been very important for developing technology and clinical applications. Electrochemical methods are highly capable for assaying the concentration of electroactive drug or biomolecule and supply excellent knowledge concerning its physical and chemical properties such as electron transfer rates, diffusion coefficients, electron transfer number, and oxidation potential. Electrochemical methods have been widely applied because of their accuracy, sensitivity, cheapness, and can applied on-site determinations of various substances. The progress on electronics has allowed developing reliable, more sensitive and less expensive instrumentations, which have significant contribution in the area of drug development, drug and biomolecule analysis. The developing new sensors for electrochemical analysis of these compounds have growing interest in recent years. Screen-printed based electrodes have a great interest in electrochemical analysis of various drugs and biomolecules due to their easy manufacturing procedure of the electrode allow the transfer of electrochemical laboratory experiments for disposable on-site analysis of some compounds. Paper based electrodes are also fabricated by new technology. They can be preferred due to their easy, cheap, portable, disposable, and offering high sensitivity properties for many application field such as environmental monitoring, food quality control, clinical diagnosis, drug, and biomolecules analysis. In this review, the recent electrochemical drug and biomolecule (DNA, RNA, µRNA, Biomarkers, etc.) studies will be presented that involve new trend disposable electrodes.

SAM Composition and Electrode Roughness Affect Performance of a DNA Biosensor for Antibiotic Resistance

Antibiotic resistance is a growing concern in the treatment of infectious disease worldwide. Point-of-care (PoC) assays which rapidly identify antibiotic resistance in a sample will allow for immediate targeted therapy which improves patient outcomes and helps maintain the effectiveness of current antibiotic stockpiles. Electrochemical assays offer many benefits, but translation from a benchtop measurement system to low-cost portable electrodes can be challenging. Using electrochemical and physical techniques, this study examines how different electrode surfaces and bio-recognition elements, i.e. the self-assembled monolayer (SAM), affect the performance of a biosensor measuring the hybridisation of a probe for antibiotic resistance to a target gene sequence in solution. We evaluate several commercially available electrodes which could be suitable for PoC testing with different SAM layers and show that electrode selection also plays an important role in overall biosensor performance.

A review on graphene-based nanocomposites for electrochemical and fluorescent biosensors

Biosensors with high sensitivity, selectivity and a low limit of detection, reaching nano/picomolar concentrations of biomolecules, are important to the medical sciences and healthcare industry for evaluating physiological and metabolic parameters.

A graphene modified carbon ionic liquid electrode for voltammetric analysis of the sequence of the Staphylococcus aureus nuc gene

The authors describe a voltammetric method for the detection of the nuc ssDNA sequence originating from Staphylococcus aureus by using a carbon ionic liquid electrode modified with electrodeposited three-dimensional graphene (3DGR). Probe ssDNA was electrostatically adsorbed on the modified electrode by a potentiostatic method. The porous structure and large surface area of 3DGR greatly increase the amount of immobilized probe ssDNA on the interface, which is beneficial for the reaction with target ssDNA. By using Methylene Blue (MB) as the electrochemical probe, the reduction peak current of MB (best measured at -0.30 V vs. SCE) can be used for detecting hybridization. The differential pulse voltammetric current of MB increases linearly in the 1.0 × 10^-12 mol L^-1 to 1.0 × 10^-6 mol L^-1 nuc concentration range, and the detection limit is 3.3 × 10^-13 mol L^-1 (at 3σ). The DNA sensor was successfully applied to the determination of the PCR product of the gene in pork. Graphical abstract Response of an electrochemical DNA biosensor based on the use of a carbon ionic liquid electrode modified with three-dimensional graphene. It enables sensitive voltammetric detection of the specific sequence of the Staphylococcus aureus nuc gene.