Enhanced adsorption of Zn2+ by salinity-aided aerobic granular sludge: Performance and binding mechanism

Application of atmospheric pressure plasma jet in membrane bioreactor for membrane fouling control: Performance evaluation and mechanism exploration

The plasma plume generated by atmospheric pressure plasma jet (APPJ) can directly oxidize and decompose the sludge on the membrane surface in membrane bioreactor (MBR), and simultaneously modify the membrane surface, thus achieving the objective of membrane cleaning. Compared with NaClO cleaning, APPJ cleaning showed stronger performance in reducing membrane fouling. Furthermore, the average membrane fouling period using NaClO cleaning was 2.5 days, while that of APPJ cleaning increased to 3 days. The average total flux recovery ratio of the membrane after APPJ cleaning reached 85.6 %, which was higher than the 73.4 % after NaClO cleaning. The atmospheric pressure plasma plume could directly blow away the sludge on the membrane surface. Plasma generated reactive species, such as free radicals (•OH), H2O2 and O3 to destroy cells and decompose extracellular polymers into small molecules. Meanwhile, the reactive species degraded β-D-glucose polysaccharide and caused the cake layer on the membrane to be looser. APPJ cleaning could degrade signal molecules C6-HSL in the cake layer, thereby maintaining C8-HSL at low levels. In addition, the direct scanning of the plasma jet to the membrane resulted in a more hydrophilic, smoother, and more electronegative surface, which increased the anti-fouling performance of the membrane.

From waste to wealth: Exploring the effect of particle size on biopolymer harvesting from aerobic granular sludge

This study aimed to examine the impact of aerobic granular sludge (AGS) sizes on its properties and alginate-like exopolymers (ALE) recovery potential. The AGS was cultivated in a lab-scale bioreactor and categorized into six size classes with 200 μm intervals. There appeared a critical size (400-800 μm) for developing stable AGS structure and excellent ALE recovery. A higher hydrophobicity (74.36 %) and density (1,037 g/L) was observed in AGS400-600μm than other sizes. Moreover, the highest ALE yield was obtained in ALE600-800μm (388 mg/g VSS) for its higher abundance of EPS-producers (35.1 %), while the PN content of ALE400-600μm was higher than other samples. Meanwhile, the concentrations of metal elements within the ALE and AGS identified that there was no bio-accumulation of metal elements in the ALE. This study offers an in-depth understanding of biopolymer recovery from AGS, paving the way for a novel resource recovery strategy through the regulation of AGS sizes.

Differential impacts of organic and inorganic phosphorus on the growth and phosphorus utilization of Microcystis aeruginosa

Phytoplankton growth in freshwater is often limited by the availability of phosphorus (P), and thorough understandings of P availability are essential to prevent algal blooms. However, the differences in bioavailability and utilization mechanisms of different P forms remain unclear, especially whether organophosphorus could be used as P sources. This study investigated the effects of 0.5, 1.0, and 2.0 mg/L P on Microcystis aeruginosa, including dissolved organic P (DOP) (1-hydroxyethane 1,1-diphosphonic acid) and dissolved inorganic P (DIP) (dipotassium phosphate). Compared with DIP, intracellular P content absorbed in DOP treatment was significantly lower. DOP was more conducive to the synthesis of soluble protein and the release of extracellular polymeric substances. Alkaline phosphatase activity was generally enhanced in response to DIP deficiency. Both DIP and DOP promoted carbon uptake to the same extent. DOP groups absorbed carbon to synthesize energy and proteins in response to stress, while DIP groups were mainly used carbon for growth. They all reduced the content of microcystin releasing into the aquatic environment and therefore reduced ecological risk caused by microcystin. Compared with DIP, the expressions of photosynthesis-related genes were significantly down-regulated in DOP group, while the expressions of nucleoside phosphate catabolism, P transporter, and amino acid biosynthesis and metabolism were significantly up-regulated in response to P deficiency environment and the stress of 1.0 mg/L DOP concentration. In summary, the bioavailability of different P forms on cyanobacteria is different, so it is not sufficient to only use total P for assessing environmental risk. P forms should also be considered for risk management of freshwater ecosystems.

The effect of salinity on trimethoprim adsorption by activated sludge extracellular polymeric substances at trace concentration

The saline wastewater produced in industrial activities and seawater use would flow into wastewater treatment plants and affect the characteristic of extracellular polymeric substance (EPS) of activated sludge, which could potentially impact the removal of antibiotics via adsorption. Nonetheless, the effect of salinity on trimethoprim adsorption by activated sludge extracellular polymeric substances at trace concentration and the underlying mechanism remain largely unknown. In this study, the effect of salinity on the adsorption removal of a typical antibiotic, i.e., trimethoprim (TMP) at trace concentration (25.0 μg/L) was evaluated. The results showed the content of EPS was decreased significantly from 56.36 to 21.70 mg/g VSS when the salinity was increased from 0 to 10 g/L. Protein fractions occupied the predominant component of EPS, whose concentration was decreased from 38.17 to 12.83 mg/g VSS. The equilibrium adsorption capacity of activated sludge for TMP was decreased by 49.70% (from 4.97 to 2.50 μg/g VSS). The fluorescence quenching results indicated the fluorescence intensity of tryptophan-like substances was decreased by 30% and the adsorption sites of EPS were decreased from 0.51 to 0.21 when the salinity was increased. The infrared spectrum and XPS results showed that the nitrogen-containing groups from protein were decreased significantly. The circular dichroic analysis showed α helix structure of protein in EPS was decreased with the increase of salinity, which was responsible for the decrease of adsorption capacity for TMP.

Feasibility and mechanism of recycling carbon resources from waste cyanobacteria and reducing microcystin toxicity by dielectric barrier discharge plasma

Recycling carbon resources from discarded cyanobacteria is a worthwhile research topic. This study focuses on the use of dielectric barrier discharge (DBD) plasma technology as a pretreatment for anaerobic fermentation of cyanobacteria. The DBD group (58.5 W, 45 min) accumulated the most short chain fatty acids (SCFAs) along with acetate, which were 3.0 and 3.3 times higher than the control. The DBD oxidation system can effectively collapse cyanobacteria extracellular polymer substances and cellular structure, improve the biodegradability of dissolved organic matter, enrich microorganisms produced by hydrolysis and SCFAs, reduce the abundance of SCFAs consumers, thereby promoting the accumulation of SCFAs and accelerating the fermentation process. The microcystin-LR removal rate of 39.8% was obtained in DBD group (58.5 W, 45 min) on day 6 of anaerobic fermentation. The toxicity analysis using the ECOSAR program showed that compared to microcystin-LR, the toxicity of degradation intermediates was reduced. The contribution order of functional active substances to cyanobacteria cracking was obtained as eaq- > •OH > 1O2 > •O2- > ONOO-, while the contribution order to microcystin-LR degradation was eaq- > •OH > •O2- > 1O2 > ONOO-. DBD has the potential to be a revolutionary pretreatment method for cyanobacteria anaerobic fermentation.

Effects of superficial gas velocity on the performance of an air-lift internal circulation partial nitrification-anammox granular sludge reactor

The airlift internal circulation reactor for partial nitrification-anammox (PNA-ALR) has the advantages of a small footprint, high mass transfer efficiency, and the ease of formation of granular sludge, thus making it an effective biological treatment for ammonia-containing wastewater. Although superficial gas velocity (SGV) is an essential parameter for PNA-ALR, it is unclear how the magnitude of SGV impacts nitrogen removal performance. In this study, the nitrogen removal efficiencies of five PNA-ALRs with different SGV were measured during feeding with synthetic municipal wastewater. At an optimal SGV of 2.35 cm s-1, the PNA-ALR consistently maintained the total inorganic nitrogen (TIN) removal efficiency at 76.31% and the effluent TIN concentration was less than 10 mg L-1. By increasing or decreasing the SGV, the nitrogen removal efficiency decreased to a range between 30% and 50%. At lower SGV, the dead space in the PNA-ALR was increased by 21.15%, and the feast/famine ratio of sludge increased to greater than 0.5, which caused a disruption in the structure, and a large loss of, granular sludge. Computational fluid dynamics (CFD) simulations showed operation at a higher SGV, resulting in excessive shear stress of 3.25 N m-2 being generated from bubble rupture in the degassing section. Fluorescent staining determined a decrease of 26.5% in viable bacteria. These results have improved our understanding of the effects of SGV on a PNA-ALR during mainstream wastewater treatment.

Bioaugmentation of intertidal sludge enhancing the development of salt-tolerant aerobic granular sludge

Three parallel bioreactors were operated with different inoculation of activated sludge (R1), intertidal sludge (ItS) (R2), and ItS-added AS (R3), respectively, to explore the effects of ItS bioaugmentation on the formation of salt-tolerant aerobic granular sludge (SAGS) and the enhancement of COD removal performance. The results showed that compared to the control (R1-2), R3 promoted a more rapid development of SAGS with a cultivation time of 25 d. Following 110-day cultivation, R3 exhibited a higher granular diameter of 1.3 mm and a higher hydrophobic aromatic protein content than that in control. Compared to the control, the salt-tolerant performance in R3 was also enhanced with the COD removal efficiency of 96.4% due to the higher sludge specific activity of 14.4 g·gVSS^-1·d^-1 and the salinity inhibition constant of 49.3 gL^-1. Read- and genome-resolved metagenomics together indicated that a higher level of tryptophan/tyrosine synthase gene (trpBD, tyrBC) and enrichment of the key gene hosts Rhodobacteraceae, Marinicella in R3, which was about 5.4-fold and 1.4-fold of that in control, could be the driving factors of rapid development of SAGS. Furthermore, the augmented salt-tolerant potential in R3 could result from that R1 was dominated by Rhodospirillaceae, Bacteroidales, which carried more trehalose synthase gene (otsB, treS), while the dominant members Rhodobacteraceae, Marinicella in R3 were main contributors to the glycine betaine synthase gene (ectC, betB, gbsA). This study could provide deeper insights into the rapid development and improved salt-tolerant potential of SAGS via bioaugmentation of intertidal sludge, which could promote the application of hypersaline wastewater treatment.

Role of extracellular polymeric substances in metal sequestration during mangrove restoration

Extracellular polymeric substances (EPS) are widely observed in aquatic ecosystems, however the potential function of EPS on metal sequestration in mangrove wetlands is unclear. Thus, an ecological restoration area (including Sonneratia apetala, Kandelia obovata and unvegetated mudflat) was employed to assess the effect of mangrove reforestation on metal sequestration and the underlying roles played by EPS. The results showed that mangrove restoration directly promoted metal accumulation (e.g., Cr, Cu, Ni, Pb, and Zn) in sediments. However, alleviated metal bioavailability was detected after mangrove reforestation. The changes in metal accumulation and bioavailability were highly correlated with EPS and microbial composition. Mangrove restoration (especially for K. obovata reforestation) also significantly promoted EPS production, in which multiple metal-chelating functional groups (e.g., hydroxyl, carboxyl, and imino) were identified by Fourier infrared spectra. Moreover, the contents of EPS were positively correlated with metal accumulation but negatively correlated with metal bioavailability. The present data further illustrated that the enhancements of Gammaproteobacteria, Bacteroidia, Desulfobulbia, and Desulfobacteria might be important for EPS production. In summary, this is the first study to reveal that the presence of artificial mangroves might act as an efficient barrier in metal sequestration and immobilization by enhancing inherent microbial EPS.

Efficient removal of organic compounds in eutrophic water via a synergy of cyanobacterial extracellular polymeric substances and permanganate

This study provides a new thinking for the efficient utilization of permanganate (Mn (VII)) in eutrophic water treatment. Eutrophic water contained a large amount of extracellular polymeric substances (EPS) with reduction and chelation; this study used phenol as typical organic matter and cyanobacteria EPS as a representative EPS to explore the mechanism by which EPS influences the oxidation of phenol by Mn(VII) at pH 5.0-9.0. The results showed that under the condition of pH 5.0-7.0, adding 0.2-10 mg/L EPS to the Mn(VII) system could effectively improve the oxidation efficiency of Mn(VII) for phenol. EPS promoted the continuous formation and stability of in situ EPS-MnO₂ colloids and significantly enhanced the oxidation of Mn(VII). EPS also combined with phenol and increased the electron cloud density to promote the oxidation of phenol by Mn(VII).

Assessing the impact of different salinities on the desorption of Cd, Cu and Zn in soils with combined pollution

Exploring the relationships between heavy metal release and salinity can help address the problems of combination of toxic heavy metals and salinization in contaminated soils. Therefore, in this study, the release characteristics of heavy metals (Cd, Cu and Zn) under different salt types and mass concentrations were investigated through batch desorption experiments. Spearman's correlation analysis was performed to assess the effects of typical physicochemical properties on metal release under salt stress. The results indicated that the types and concentration gradients of salt had notably different impacts on the release of different metals; specifically, there were significant impacts for Cd but slight impacts for Cu and Zn. MgCl₂ and CaCl₂ had more obvious promoting effects on Cd release, followed by a salt mixture and NaCl, and this pattern was similar for Zn release. Most salts could slightly restrain the release of Cu, except for MgCl₂ and Na₂SO₄, which had slight promoting effects. Moreover, low levels of CaCl₂ could effectively restrain the release of Cu. The results showed that the release capacities of metals followed the order of Cd > Cu > Zn, possibly attributed to the competitive adsorption among cations. Ferromanganese oxides in the soil favored the release of Cd and Zn under salt treatments, and redox potential was an important factor affecting Cu release. The results also suggested that the background values of metals could affect metal release, but the effects were varied under different salt treatments for Zn. The reason for this may be that the addition of different salts changed the effects of certain soil properties on the metal release. Overall, this study can serve as an important reference for controlling heavy metal pollution in soils in salinization and coastal areas.

Preparation and Characterization of a Novel Amidoxime-Modified Polyacrylonitrile/Fly Ash Composite Adsorbent and Its Application to Metal Wastewater Treatment

The polyacrylonitrile/fly ash composite was synthesized through solution polymerization and was modified with NH2OH·HCl. The amidoxime-modified polyacrylonitrile/fly ash composite demonstrated excellent adsorption capacity for Zn2+ in an aqueous medium. Fourier transform-Infrared spectroscopy, thermogravimetric analysis, nitrogen adsorption, X-ray diffraction, and scanning electron microscopy were used to characterize the prepared materials. The results showed that the resulting amidoxime-modified polyacrylonitrile/fly ash composite was able to effectively remove Zn2+ at pH 4-6. Adsorption of Zn2+ was hindered by the coexisting cations. The adsorption kinetics of Zn2+ by Zn2+ followed the pseudo-second order kinetic model. The adsorption process also satisfactorily fit the Langmuir model, and the adsorption process was mainly single layer. The Gibbs free energy ΔG0, ΔH0, and ΔS0 were negative, indicating the adsorption was a spontaneous, exothermic, and high degree of order in solution system.

Biosorption of LMW PAHs on activated sludge aerobic granules under varying BOD loading rate conditions

Polycyclic aromatic hydrocarbons belong to the main priority substances for the aquatic environment. One of the emission sources of these compounds to environment is wastewater discharged from conventional wastewater treatment systems, which are not designed to cope with this type of pollution. Thus, due to the widely discussed properties of aerobic granular activated sludge in the literature - a conducted study has proven its ability to remove LMW PAHs (naphthalene (Nap), acenaphthylene (Acy), acenaphthene (Ace), fluorene (Flu), phenanthrene (Phe) and anthracene (Ant)) from wastewater by biosorption process at varying loadings of organic compounds expressed as BOD (kg/kg·d) on the activated sludge mass. The maximum biosorption of Nap was 605 µg/kg_d.m., Acy equals to 134 µg/kg_d.m., Ace equals to 355 µg/kg_d.m. Flu equals to 104 µg/kg_d.m. Phe equal to 204 µg/kg_d.m. and Ant equal to 173 µg/kg_d.m. The study showed that the BOD loading rate is one of the factors affecting the biosorption process of LMW PAHs. However, as the amount of adsorbed LMW PAHs increased, the condition of aerobic granular activated sludge deteriorated, which was evidenced by gradual increase in the values of technological parameters of activated sludge (SVI, HRT, SRT) and a smaller increase in activated sludge dry mass.

Cr(VI) bioremediation by active algal-bacterial aerobic granular sludge: Importance of microbial viability, contribution of microalgae and fractionation of loaded Cr

In this study, chromium (Cr) was used as an example of the most toxic heavy metals that threaten human health, and Cr(VI) bioremediation was implemented by using a new type of aerobic granular sludge (AGS), i.e., algal-bacterial AGS. Results showed that the total Cr removal efficiency by active algal-bacterial AGS was 85.1 ± 0.6% after 6 h biosorption at pH 6 and room temperature, which could be further improved to 93.8 ± 0.4% with external electron donor (glucose) supply. However, inactivation dramatically decreased the total Cr removal efficiency to 29.6 ± 3.5%, and no effect was noticed when external electron donor was provided. With an antibiotic (levofloxacin) or metabolic inhibitor (NaN₃) addition, the total Cr removal efficiency of bacterial AGS was inhibited by 16.0% or 10.1%, but this efficiency was maintained in the case of algal-bacterial AGS. Analysis of extracellular polymeric substances (EPS) composition revealed that under Cr(VI) exposure, more loosely bound EPS were secreted by algal-bacterial AGS, favoring Cr(VI) reduction. Results from chemical fractionation indicated that 90.5 ± 4.2% of the loaded Cr on algal-bacterial AGS was in an immobile form, reflecting the low environmental risk of Cr-loaded algal-bacterial AGS after biosorption of hazardous heavy metals from wastewater.

Excess sludge disintegration by discharge plasma oxidation: Efficiency and underlying mechanisms

A huge amount of excess sludge is inevitably produced in wastewater treatment, and it is becoming more and more urgent to realize efficient sludge reduction. Discharge plasma oxidation was used to efficiently disintegrate excess sludge for sludge reduction in this study. Approximately 18.22% sludge disintegration and 27.8% reduction of total suspended solids (TSS) were achieved by discharge plasma treatment. The water content of the filter cake decreased from 81.9% to 76.0% and the bound water content decreased from 2.66 g/g dry solid to 0.73 g/g dry solid after treatment. The large quantities of reactive oxygen species (ROS) generated by discharge plasma played important roles in sludge disintegration by destroying flocs and promoting the transformation of organic substances. Concurrent cell lysis induced by ROS oxidation released intracellular organics and water into the liquid phase. The fraction of soluble extracellular polymer substances (S-EPS) was enhanced from 16.10% to 58.51%, whereas the tightly bound fraction was reduced from 70.62% to 28.91%. Migration and decomposition of EPS were the main processes for EPS changing at a low oxidation capacity, whereas cell lysis became important at a high oxidation capacity. In summary, the plasma treatment effectively improved sludge disintegration.

Adsorption of impurities from nickel-plating baths using commercial sorbents to reduce wastewater discharges

The presence of moderate concentrations of impurities in the nickel-plating baths generates failures on the coated pieces. This situation entails the necessity of replacing the electroplating bath, which implies the generation of large volumes of wastewater with metallic species and high quantity of sludge. For this reason, the adsorption of the principal impurities of nickel-plating baths of an industry was analyzed in this work. Particularly, the removal of Zn²⁺ was studied in more detail since the presence of this metal in the baths generates black spots on the coated pieces. Different commercial materials were used as adsorbents and Zn²⁺ adsorption studies were carried out using both standard solutions and industrial water from the nickel-plating baths. All the adsorption tests were performed in batch systems under constant agitation and the quantification of the impurities was made by ICP-MS analysis. The bone char (BC) was an efficient adsorbent for the removal of the principal impurities of nickel-plating baths. The use of molecular simulation tools helped to understand the preferences of the hydroxyapatite (the principal component of bone char) for different metallic ions present in the industrial waters. According to both the experimental adsorption and molecular simulation results, hydroxyl and phosphate groups of bone char are responsible of the adsorption of impurities of nickel-plating baths.

One-pot fabrication of antibacterial β-cyclodextrin-based nanoparticles and their superfast, broad-spectrum adsorption towards pollutants

The current water treatment technology is still based on low energy efficient processes due to the complex composition of wastewater. To achieve high energy efficiency, many micro-porous materials with complex functional groups have been fabricated because of their high pollutant adsorption capabilities. In this work, antibacterial β-cyclodextrin-based nanoparticles (E-β-CDN) were prepared via one-pot method to explore their adsorption performance to pollutants in wastewater. The resulting nanoparticles exhibited superfast adsorption kinetics to pollutants with removal efficiency of over 95% within 10 s. The nanoparticles also presented broad-spectrum adsorption to organic pollutants and heavy metal ions, and their maximum adsorption capacity was 3289.6 mg g^-1 towards methyl orange (MO) and 970.8 mg g^-1 towards Pb(II), much higher than that of many other adsorbents. Easy cyclic adsorption-desorption was another distinguishing feature of the nanoparticles, whose removal efficiency to these pollutants hardly varied after 10 cycles of regeneration. Interestingly, the resulting nanoparticles showed prominent antibacterial activity of 99.99% bacterial inhibitive rate against both gram-negative bacteria Escherichia coli (E. coli) and gram-positive bacteria Staphylococcus aureus (S. aureus). These results suggest that the resulting nanoparticles have great potential in the purification of the wastewater.

Bacteriophage-mediated extracellular DNA release is important for the structural stability of aerobic granular sludge

The aim of this study was to investigate the microbial characteristics and the structural role of exDNA in different size AGSs. Metagenomic results showed that exDNA has a significantly lower GC content, ~46.0%, than the ~65.0% GC of intracellular DNA (inDNA). Taxonomic predictions showed most of the reads from the exDNA that could be taxonomically assigned were from members of the phyla Bacteroidetes (55.0-64.2% of the total exDNA reads). Assigned inDNA reads were mainly from Proteobacteria (50.9-57.8%) or Actinobacteria (18.0-28.0%). Reads mapping showed that exDNA read depths were similar across all predicted open reading frames from assembled genomes that were assigned as Bacteroidetes which is consistent with cell lysis as a source of exDNA. Enrichment of CRISPR-CAS proteins in exDNA reads and CRISPR spacers in Bacteroidetes associated draft genomes suggested that bacteriophage infection may be an important cause of lysis of these cells. A critical role for this exDNA was found using DNase I digestion experiments which showed that the exDNA was vital for the structural stability of relatively small sized AGS but not for the larger sized AGS. The characteristics of exDNA in AGSs revealed in this work provide a new perspective on AGS components and structural stability.