Hybridizing Ag-Doped ZnO nanoparticles with graphite as potential photocatalysts for enhanced removal of metronidazole antibiotic from water

Studies on Photocatalytic and Antioxidant Efficacy of Ag-Embedded ZnO Nanocomposites

This study focuses on the synthesis and characterization of Ag-embedded ZnO nanocomposites with varying silver (Ag) contents (1, 3, and 5 wt %) to evaluate their photocatalytic and antioxidant activities. The nanocomposites were synthesized using a sol-gel method, followed by thermal decomposition, and characterized by XRD, SEM, BET, Raman, EDS, TEM, FTIR, and UV-vis spectroscopy. The photocatalytic degradation of the rhodamine 6G (R6G) dye was tested under UV light, and its antioxidant capacity was evaluated using DPPH, ABTS, FRAP, and FIC assays. Among the synthesized samples, the ZnO-5 wt % Ag nanocomposite exhibited the enhanced photocatalytic efficiency, achieving 93.36% degradation of R6G, with a reaction rate constant of 6.54 × 10-3 min-1. It also demonstrated recyclability, retaining over 91% efficiency after five cycles. In the antioxidant assays, the ZnO-5 wt % Ag composite showed enhanced free radical scavenging capacity, confirming its strong antioxidant potential. These Ag-embedded ZnO nanocomposites offer a dual functionality, enhancing both photocatalytic and antioxidant activities. Future research will focus on their scalability and visible-light photocatalytic performance to enhance their applications in environmental remediation and biomedical applications.

Multi-technique-based electrochemical sensing of lipoarabinomannan (LAM) antigen as a biomarker for early-stage tuberculosis diagnosis

Tuberculosis (TB) remains a pressing global health challenge, necessitating precise and reliable biomarkers for early detection. Lipoarabinomannan (LAM), an FDA-approved biomarker (Monoclonal Antibody-MBS320597), holds significant potential due to its association with theMycobacterium tuberculosiscell wall. This study systematically evaluates LAM concentrations ranging from 1 pg ml-1to 6 ng ml-1using square wave voltammetry analysis, achieving an exceptional limit of detection of 0.077 pg ml-1. A comprehensive review of current diagnostics highlights critical gaps, including limitations in speed and accuracy, underscoring the urgency for advanced methodologies. In this study, LAM's performance is assessed by analyzing spiked urine samples, demonstrating its high sensitivity, specificity, and reliability as an early-stage TB biomarker. By comparing findings with existing diagnostic tools and addressing identified limitations, this study emphasizes LAM's potential to transform TB diagnostic strategies. These results contribute to global efforts to improve early detection, enhance patient outcomes, and pave the way for future advancements in TB diagnostics.

Aloe vera assisted green synthesis of Ag and Cu co-doped ZnO nanoparticles and a comprehensive analysis of their structural, morphological, optical, electrical and antibacterial properties

This study investigates the potential of utilizing Aloe vera-assisted green synthesis with transition metal dopants of Ag and Cu for greater efficiency and sustainability in advanced scientific applications utilizing ZnO nanoparticles. Samples were prepared using the co-precipitation method, maintaining a basic pH media of 10. Aloe vera gel extract was chosen for its acclaimed role as a stabilizing and reducing agent and its proven antioxidant, antibacterial, and anticancer properties. The XRD report revealed the hexagonal Wurtzite crystal structure of nanoparticles, exhibiting a crystallite size range of 17-23 nm with substantial alterations in lattice parameters, dislocation density, and bond lengths when dopants were added. Additionally, EDX analysis confirmed the perfect doping of Ag and Cu in ZnO without any impurities. SEM analysis indicated a reduction in agglomeration, accompanied by a transition in particle morphology from columnar to globular. Additionally, the optical study showed a band gap range of 3.18-3.27 eV, confirming it to be a wide band gap semiconductor. The effect of dopants resulted in an increase in transparency and band gap, while a decrease in absorption coefficient in the visible wavelength region. With increasing temperature, a decline in electrical resistivity was noted, with co-doped nanoparticles consistently exhibiting the lowest resistivity, affirming semiconductor characteristics. Most importantly, A remarkable antibacterial efficacy was noticed at low concentrations against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria. The zone of inhibition produced by nanoparticles exhibited values akin to the antibiotic control, even at substantially lower doses. This research offers a comprehensive analysis of the effects of Ag and Cu in Aloe vera-assisted green-synthesized ZnO nanoparticles, concurrently addressing their potential applications in biomedical, energy storage, and optoelectronic devices.

Multi-antibiotics removal under UV-A light using sol-gel prepared TiO2: Central composite design, effect of persulfate addition and degradation pathway study

The removal of three antibiotics i.e., metronidazole (MNZ), ciprofloxacin (CIP) and tetracycline (TET), from aqueous system via TiO2 photocatalysis under UV-A light was investigated. Photocatalyst(s) were prepared using sol-gel method under different calcination temperatures (400-800 °C) and water-alcohol ratio. The spherical shaped catalyst (mean particle size ∼ 61 nm) was characterized via FTIR, XRD, BET, SEM, Raman, XPS, UV-DRS, and Fluorometry, and point of zero charge was also determined (pHPZC ∼ 6.6). Batch photo-catalytic degradation studies have shown complete degradation of MNZ, CIP and TET after 50, 75 and 20 min with a TOC removal of 37%, 44% and 31%, respectively. The activity of sol-gel prepared TiO2 was comparatively higher than commercially available pure anatase TiO2 nanoparticles due to lesser mean particle size. The ratio of water to alcohol in the preparation of TiO2 catalyst was found to have significant effect on antibiotic removal. Moreover, persulfate (PS) addition of 0.1 g/L amplified the pseudo-first-order removal-rate constant by 2.75, 3.3 and 1.6 times for MNZ, CIP and TET, respectively. The higher initial pH values (8 and 10) have shown the best removal efficiency for all antibiotics. Subsequently, central composite design (CCD) experiments were conducted under multi-antibiotic conditions. Near complete removal of all antibiotics were observed within 120 min. Scavenging studies revealed that hydroxyl and superoxide radicals play major roles in photo-catalytic degradation of MNZ, CIP and TET. During photocatalysis, MNZ degradation was initiated by hydroxylation reaction, CIP by piperazine ring opening by hydroxyl attack and TET by multiple hydroxylation process. Overall, TiO2 showed good efficiency at degrading multiple antibiotics and has the potential for practical application on a larger scale.

Photocatalytic degradation of metronidazole and oxytetracycline by novel l-Arginine (C, N codoped)-TiO2/g-C3N4: RSM optimization, photodegradation mechanism, biodegradability evaluation

Removal of Metronidazole (MNZ) and Oxytetracycline (OTC) from wastewater by the prepared (C, N codoped)-TiO₂/g-C₃N₄ (Graphitic carbon nitride) was examined. l-Arginine (C, N codoped)-TiO₂ and l-Arginine (C, N codoped)-TiO₂/g-C₃N₄ photocatalysts were successfully synthesized through the sol-gel method, and optimal ratio of l-arginine:TiO₂, as well as l-arginine/TiO₂:g-C₃N₄, was determined by a kinetic study of photodegradation process. The maximum photocatalytic removal rate (0.065 min^-1 for MNZ removal) was observed using 1% l-Arginine-TiO₂/g-C₃N₄ (1:1) under visible light illumination, 2.2 and 6.5 times greater than those of 1% l-Arginine-TiO₂ and pure TiO₂, respectively. l-Arginine (1%)-TiO₂/g-C₃N₄ (1:1) (co-doped-TCN) was investigated using X-ray diffraction analysis (XRD), Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray (EDX), Photo-luminescence (PL), and Differential Reflectance Spectroscopy (DRS) as the best-performing photocatalyst. Response surface methodology (RSM) was used to study the effect of co-doped-TCN dosage (0.5-1.0 g/L), pH of simulated wastewater (4-10), initial concentration of MNZ and OTC (50-100 mg/L), and irradiation time (30-90 min for MNZ and 20-40 min for OTC) on removal efficiency of the antibiotics. Also, their optimum values were determined by RSM. The treated pharmaceutical wastewater showed high biodegradability features with 5-day biological oxygen demand/chemical oxygen demand (BOD₅/COD) of 0.51 and 0.46 after 40 and 100 min reaction for OTC and MNZ, respectively. The order of reactive species responsible for the photodegradation of pollutants was •O₂^─> •OH > h⁺>¹O₂. The effect of inorganic anions showed that all anions decreased the removal efficiency of both antibiotics in order of NO₃^─> Cl^─ >SO₄^2─>HPO₄^2─ >HCO₃^─ for MNZ and NO₃^─> SO₄^2─ > Cl^─ >HPO₄^2─ >HCO₃^─ for OTC. Also, introducing different oxidants improved the photocatalytic removal efficiency with the order of H₂O₂>K₂S₂O₈> KBrO₃.

Detection and removal technologies for ammonium and antibiotics in agricultural wastewater: Recent advances and prospective

With the extensive development of industrial livestock and poultry production, a considerable part of agricultural wastewater containing tremendous ammonium and antibiotics have been indiscriminately released into the aquatic systems, causing serious harms to ecosystem and human health. In this review, ammonium detection technologies, including spectroscopy and fluorescence methods, and sensors were systematically summarized. Antibiotics analysis methodologies were critically reviewed, including chromatographic methods coupled with mass spectrometry, electrochemical sensors, fluorescence sensors, and biosensors. Current progress in remediation methods for ammonium removal were discussed and analyzed, including chemical precipitation, breakpoint chlorination, air stripping, reverse osmosis, adsorption, advanced oxidation processes (AOPs), and biological methods. Antibiotics removal approaches were comprehensively reviewed, including physical, AOPs, and biological processes. Furthermore, the simultaneous removal strategies for ammonium and antibiotics were reviewed and discussed, including physical adsorption processes, AOPs, biological processes. Finally, research gaps and the future perspectives were discussed. Through conducting comprehensive review, future research priorities include: (1) to improve the stabilities and adaptabilities of detection and analysis techniques for ammonium and antibiotics, (2) to develop innovative, efficient, and low cost approaches for simultaneous removal of ammonium and antibiotics, and (3) to explore the underlying mechanisms that governs the simultaneous removal of ammonium and antibiotics. This review could facilitate the evolution of innovative and efficient technologies for ammonium and antibiotics treatment in agricultural wastewater.

Incorporation of Ag-doped ZnO nanorod through Graphite hybridization: Effective approach for degradation of Ciprofloxacin

To remove the Ciprofloxacin (CIP) from aqueous solution, ZnO-Ag-Gp nanocomposite exhibited efficient photocatalytic properties. The biopersistent CIP is pervasive in surface water and also hazardous to human and animal health. This study utilized the hydrothermal technique to prepare Ag-doped ZnO hybridizing Graphite (Gp) sheet (ZnO-Ag-Gp) to degrade pharmaceuticals pollutant CIP from an aqueous medium. The structural and chemical compositions of the photocatalysts were determined by XRD, FTIR and XPS analysis. FESEM and TEM images revealed the nanorod ZnO with round shape Ag distributed on a Gp surface. The reduced bandgap of the ZnO-Ag-Gp sample enhanced the photocatalytic property which was measured by using UV-vis Spectroscopy. Dose optimization study found that 1.2 g/L is optimum for single (ZnO) and binary (ZnO-Gp and ZnO-Ag), where 0.3 g/L ternary (ZnO-Ag-Gp) exhibited maximum degradation efficiency (98%) within 60 min for 5 mg/L CIP. Pseudo 1st order reaction kinetics rate was found highest for ZnO-Ag-Gp (0.05983 min^-1) and it decreased to 0.03428 min^-1 for annealed sample. Removal efficiency decreased to only 90.97% at 5th run and hydroxyl radicals played a vital role to degrade CIP from aqueous solution. UV/ZnO-Ag-Gp will be a promising technique to degrade wide-ranging pharmaceutical antibiotics from the aquatic medium.

Photocatalytic assessed adsorptive removal of tinidazole from aqueous environment using reduced magnetic graphene oxide-bismuth oxychloride and its silver composite

Antibiotics (tinidazole (TNZ)) in wastewater, exhibit adverse effects on humans and ecosystem. The current study was aimed to synthesize photocatalysts mrGO/BiOCl and mrGO/BiOCl/Ag. mrGO was coupled with BiOCl by hydrothermal method and Ag was deposited over it. The synthesized mrGO/BiOCl and mrGO/BiOCl/Ag were confirmed by Pzc analysis (5.5 and 4.4 for mrGO/BiOCl and mrGO/BiOCl/Ag, respectively), surface area analysis (380 m2 g-1, 227.7 m2 g-1, 220 m2 g-1 for mrGO, mrGO/BiOCl and mrGO/BiOCl/Ag respectively), elemental analysis (Ag, O, Bi, Fe), surface morphology (rough ball like sphere of mrGO/BiOCl and cubic Ag nanoparticles in mrGO/BiOCl/Ag), functional groups and band gap (Eg) determination. The Eg was determined using Kubelka-Munk equation as 3.5 and 2.8 eV for mrGO/BiOCl and mrGO/BiOCl/Ag respectively. During the adsorption study, the best experimental conditions for various operating parameters such as pH (2), contact time (5 min for mrGO/BiOCl and 10 min for mrGO/BiOCl/Ag under UV irradiation), TNZ concentration (18 μgL-1) and catalyst dosage (0.001 g) were achieved. Kinetic study revealed that both composites followed pseudo second order kinetics (R2 = 0.9979 and 0.9986, respectively). Data of rGO/BiOCl was fitted to Freundlich adsorption model (R2 = 0.9687) and rGO/BiOCl/Ag fitted to Langmuir adsorption model (R2 = 0.9994). Moreover, thermodynamic parameters confirmed that a photodegradation phenomenon was spontaneous and exothermic. The results confirmed that rGO/BiOCl and rGO/BiOCl/Ag are appropriate composites for TNZ removal from the aqueous environment with removal efficiency of 97 and 24%, respectively.

Cobalt ferrite-modified sol-gel synthesized ZnO nanoplatelets for fast and bearable visible light remediation of ciprofloxacin in water

Currently, metal oxide photocatalysts is a green and facile tool for the elimination of emerging pollutants utilizing light illumination. Though, the wide bandgap energy (E_g), rapid recombination of photogenerated carriers, and photostability of these oxides represent critical issues before the actual application. Herein, we familiarise a sol-gel based synthesis of ZnO hexagonal nanoplatelets modified with CoFe₂O₄ (CFO) nanoparticles at minor loading (1.0-4.0 wt %) to yield CFO/ZnO nanoheterojunctions. The CFO/ZnO unveiled mesostructured surfaces at surface areas of 102-120 m² g^-1 and photoactive in the visible region with high. The CFO addition to ZnO reduced its E_g from 3.14 to 2.66 eV. The formed nanoheterojunctions were applied to remediate ciprofloxacin (CPF), as an antibiotic pollutant in wastewater. The 2.4 g L^-1 3.0 wt % CFO-added ZnO exhibited a 100% removal of 10-ppm CPF within 45 min of visible-light irradiation and sustainable recycling ability for five consecutive runs at 97%. The sustainable performance of CFO/ZnO is ascribed to the suppression of photogenerated carriers and reduction of E by p-n nanoheterojunction formation. This study broadens the way for nanoheterojunction oxides for the destruction of pharmaceutical wastes under visible-light illumination.

Graphene-based materials for metronidazole degradation: A comprehensive review

Due to its cytotoxic effect, metronidazole (MNZ) is a drug commonly used to treat bacterial, protozoal, and microaerophilic bacterial infections. After consumption, it undergoes a series of metamorphic reactions that lead to the degradation of oxidized, acetylated, and hydrolyzed metabolites in the environment. To eliminate such pollutants, due to their high potential, adsorption and photocatalysis extensive processes are used in which graphene can be used to improve efficiency. This review analyses the use of graphene as an absorbent and catalyst with a focus on absorption and photocatalytic degradation of MNZ by graphene-based materials (GBMs). The parameters affecting the adsorption, and photocatalytic degradation of MNZ are investigated and discussed. Besides, the basic mechanisms occurring in these processes are summarized and analyzed. This work provides a theoretical framework that can direct future research in the field of MNZ removal from aqueous solutions.

Heterogeneous Photocatalysis of Metronidazole in Aquatic Samples

Metronidazole (MET) is a commonly detected contaminant in the environment. The compound is classified as poorly biodegradable and highly soluble in water. Heterogeneous photocatalysis is the most promoted water purification method due to the possibility of using sunlight and small amounts of a catalyst needed for the process. The aim of this study was to select conditions for photocatalytic removal of metronidazole from aquatic samples. The effect of catalyst type, mass, and irradiance intensity on the efficiency of metronidazole removal was determined. For this purpose, TiO₂, ZnO, ZrO₂, WO₃, PbS, and their mixtures in a mass ratio of 1:1 were used. In this study, the transformation products formed were identified, and the mineralization degree of compound was determined. The efficiency of metronidazole removal depending on the type of catalyst was in the range of 50-95%. The highest MET conversion (95%) combined with a high degree of mineralization (70.3%) was obtained by using a mixture of 12.5 g TiO₂-P25 + PbS (1:1; v/v) and running the process for 60 min at an irradiance of 1000 W m^-2. Four MET degradation products were identified by untargeted analysis, formed by the rearrangement of the metronidazole and the C-C bond breaking.

A cucurbit[7]uril-based supramolecular fluorescent probe for the detection of metronidazole with high sensitivity and strong anti-interference capacity

We propose a new method for the selective detection of the antibiotic metronidazole (MNZ) using CB[7]-JAT (cucurbit[7]uril = CB[7] and JAT = jatrorrhizine) as a fluorescent probe, which is based on the competitive reaction between MNZ and JAT for the occupancy of the CB[7] cavity. The proposed method gives a good calibration curve in the concentration range of 0.38–60 μM, and the limit of detection for MNZ is 65 ng mL−1 with those obtained by the standard curve method. Moreover, the proposed method was successfully applied for the determination of MNZ in liquid milk. Most importantly, due to the high binding affinity between CB[7] and MNZ, the proposed method shows great anti-interference capacity to accurately detect MNZ in the presence of other antibiotics.

Reusable Ag@TiO2-Based Photocatalytic Nanocomposite Membranes for Solar Degradation of Contaminants of Emerging Concern

Two significant limitations of using TiO2 nanoparticles for water treatment applications are reduced photocatalytic activity under visible radiation and difficulty recovering the particles after use. In this study, round-shaped Ag@TiO2 nanocomposites with a ≈21 nm diameter and a bandgap energy of 2.8 eV were synthesised by a deposition-precipitation method. These nanocomposites were immobilised into a porous poly (vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) matrix and well-distributed within the pores. The photocatalytic activity of Ag@TiO2/PVDF-HFP against metronidazole (MNZ) under solar radiation was evaluated. Further, an adaptive neuro-fuzzy inference system (ANFIS) was applied to predict the effect of four independent variables, including initial pollutant concentration, pH, light irradiation intensity, and reaction time, on the photocatalytic performance of the composite membrane on MNZ degradation. The 10% Ag@TiO2/PVDF-HFP composite membrane showed a maximum removal efficiency of 100% after 5 h under solar radiation. After three use cycles, this efficiency remained practically constant, demonstrating the membranes' reusability and suitability for water remediation applications.

Enhanced effect of pyrite on the removal of metronidazole by zero valent iron

The abuse and improper disposal of antibiotics including metronidazole (MNZ) result in serious contamination in aquatic environments. In this study, pyrite, which was not reactive for MNZ removal, was simply mixed with zero valent iron (ZVI) to efficiently remove MNZ in anaerobic aqueous solutions. A dual ZVI/pyrite system consisting of ZVI (1.0 g/L) and pyrite (4.0 g/L) removed MNZ completely in 360 min within a broad pH₀ range (5.0-9.0), and it still maintained a high removal efficiency (~80%) even at a high pH₀ of 10.0. By contrast, single ZVI (1.0 g/L) showed much lower efficiency (4.8%-22.0%) within the same pH₀ range (5.0-10.0). On investigating the mechanism of MNZ removal, the cooperation between ZVI and pyrite enhanced the surface corrosion of ZVI and facilitated the redox cycle of Fe(III)/Fe(II) to generate more sorbed Fe(II), which was a dominant reactive species for MNZ removal. Pyrite also activated the ZVI surface to form FeS@Fe in situ, accelerating the electron transfer from Fe⁰ core to the surface-enriched MNZ, and stimulated the formation of green rust sulfate on the ZVI surface to further promote MNZ removal. LC-MS analysis confirmed ZVI/pyrite reductively transformed MNZ into readily biodegradable products by denitration and cleavage of hydroxyethyl.

New insights into the mechanisms of tartaric acid enhancing homogeneous and heterogeneous copper-catalyzed Fenton-like systems

The specific roles of tartaric acid (TA), as an eco-friendly ligand, in homogeneous and heterogeneous copper-catalyzed systems were systematically revealed and new mechanisms of TA enhancing the three Fenton-like processes were proposed to provide a theoretical significance in overcoming the deficiency of conventional Fenton processes. The results identified hydroxyl radical (•OH) as the main species responsible for the simultaneous decomposition of TA and metronidazole (MNZ) according to TOC removal. The ESR technique was used to detect superoxide radicals (•O₂^-), carbon-centered radical (•R) and hydrogen radical (•H) in the Cu²⁺/TA/H₂O₂ system, which contributed to the acceleration of the Cu²⁺/Cu⁺ redox cycle. The enhancing effect of TA on the homogeneous process was ascribed to the formation of a soluble complex with Cu²⁺, which favored the pH range extension, Cu⁺ oxidation, and radical generation. Moreover, the adsorption of TA on the catalysts surface promoted the consumption of H₂O₂, inducing •OH generation. The formed surface complex (≡Cu²⁺-TA) also accelerated the regeneration of ≡Cu⁺, which was confirmed by density functional theory (DFT) calculation and surface characterization analysis (SEM, XRD, and XPS). The possible degradation pathways of MNZ in TA-modified Fenton-like system were also clarified.

Adsorption-photocatalytic processes for removal of pentachlorophenol contaminant using FeNi3/SiO2/ZnO magnetic nanocomposite under simulated solar light irradiation

The adsorption followed by photocatalytic degradation process was examined for the pentachlorophenol (PCP) removal from aqueous solution. These processes were accomplished by using FeNi₃/SiO₂/ZnO magnetic nanocomposite as an adsorbent-photocatalytic agent and under the irradiation of solar light. The magnetic nanocomposite used was first synthesized and then was characterized using transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), vibrating-sample magnetometer (VSM), and X-ray diffraction (XRD) spectroscopy. The PCP removal efficiency was tested for various factors, including pH, PCP concentration, and nanocomposite dose at different contact times. The characterization results of TEM, FE-SEM, and VSM analysis showed that the synthesized nanoparticles are amorphous and tend to agglomerate due to their high super-paramagnetic property. In addition, the EDX technique showed that the Zn and O elements had the highest weight percent in the synthesized nanocomposite, respectively. On the other hand, XRD analysis revealed that the crystalline size of the nanoparticles was about 42 nm. The kinetic of PCP degradation followed the pseudo-first-order model with R² = 0.978. According to the results of the isotherm study, the adsorption of PCP onto the nanoparticles followed the Freundlich model. The results of adsorption-photocatalytic degradation experiments showed that 100% removal of PCP was obtained at optimum conditions of pH = 3, nanocomposite dose = 0.5 g/L, contact time = 180 min, and initial PCP concentration of 10 mg/L. Through the results obtained from this study, the adsorption process followed by solar light photocatalytic degradation process using FeNi₃/SiO₂/ZnO magnetic nanocomposite is found to be an efficacious treatment method for the removal of PCP contaminant from water and wastewater.

Comparative analysis of linear and nonlinear equilibrium models for the removal of metronidazole by tea waste activated carbon

Tea waste was carbonized at 400 °C for 45 min and modified with potassium hydroxide (KOH), to enhance the active sites for the adsorption of antibiotics. The developed tea waste activated carbon (TWAC) was used as a novel eco-friendly and cost-effective adsorbent for metronidazole (MZN) removal from aqueous solution. The textural and surface properties of the adsorbent were determined using Brunauer-Emmett-Teller (BET) and FT-Raman analysis. The BET surface was found to have increased from 24.670 to 349.585 after carbonization and KOH modification. The batch experimental parameters were optimized and equilibrium time was found to be 75 min. Linear and non-linear models were carried out on the adsorption isotherm and kinetics to determine the best fit for the adsorption data. The adsorption equilibrium data were well fitted by the Freundlich isotherm and pseudo-second order models, with higher regression correlation (R²) and smaller chi-square (χ²), as predicted by the non-linear model. The thermodynamic results revealed the adsorption of MZN as spontaneous, physical, and consistently exothermic in character. The activation energy value of 7.610 kJ/mol further revealed that the adsorption process is dominated majorly by physical adsorption. The removal of MZN onto TWAC was best described by the non-linear adsorption isotherm and kinetics model.

Hazardous wastes treatment technologies

A review of the literature published in 2019 on topics related to hazardous waste management in water, soils, sediments, and air. The review covered treatment technologies applying physical, chemical, and biological principles for the remediation of contaminated water, soils, sediments, and air. PRACTICAL POINTS: This report provides a review of technologies for the management of waters, wastewaters, air, sediments, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) in three scientific areas of physical, chemical, and biological methods. Physical methods for the management of hazardous wastes including general adsorption, sand filtration, coagulation/flocculation, electrodialysis, electrokinetics, electro-sorption ( capacitive deionization, CDI), membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, potassium permanganate processes, and Fenton and Fenton-like process were reviewed. Biological methods such as aerobic, anoxic, anaerobic, bioreactors, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed. Case histories were reviewed in four areas including contaminated sediments, contaminated soils, mixed industrial solid wastes and radioactive wastes.

Comparison of Ag and AgI-Modified ZnO as Heterogeneous Photocatalysts for Simulated Sunlight Driven Photodegradation of Metronidazole

Ag and AgI-modified ZnO composites (Ag/ZnO and AgI/ZnO) were synthesized in facile ways. The photocatalysts were used for the photodegradation of metronidazole (MNZ) under the irradiation of simulated sunlight. The results of experiments showed that both Ag/ZnO and AgI/ZnO had a specific molar ratio to reach the best performance. Ag/ZnO performed better in the photodegradation of MNZ than AgI/ZnO under the same conditions. The reaction rate constant of AgI/ZnO was less affected by the variation of initial concentration of MNZ or pH values. The main reactive oxygen species of the photocatalytic process are OH, O2− and h+, but the free radicals which play the most critical part differ in Ag/ZnO and AgI/ZnO. Several intermediates were revealed by LC–MS/MS analysis. The stability of the photocatalysts was evaluated by a series of repeated MNZ photodegradation experiments. The results showed that AgI/ZnO had better stability than Ag/ZnO.

Synthesis of ZnO@Ag dumbbells for highly efficient visible-light photocatalysts

The photocatalytic activity (PCA) of ZnO@Ag nanocomposites for different concentrations of Ag is reported. Dumbbells shaped zinc oxide (ZnO) nanostructures with silver (Ag) nanoparticles were synthesized by a simple chemical colloidal method. The as synthesized nanocomposites (without any heat treatment) were used for optical and photocatalytic studies. The FESEM analysis shows that the composite catalysts are composed of ZnO dumbbells coated with spherical Ag nanoparticles. UV-visible spectrum of ZnO@Ag photocatalysts shows a strong absorption band of ZnO at 380 nm with a plasmonic peak of Ag at 440 nm. The PL emission intensity of the composites varies with Ag concentration and has a minimum for the catalyst containing 13.7% of Ag. A possible growth mechanism of ZnO nanostructures with hexagonal cross-section has been proposed. Photocatalytic property of the as synthesized ZnO and ZnO@Ag catalysts was studied by investigating the degradation of methylene blue (MB) dye on exposure to UV-visible radiation. A relatively faster degradation of the dye was observed for ZnO@Ag composites as compared to pure ZnO, showing an improved photocatalytic behavior in the visible region. We proposed a possible mechanism for the enhancement in photocatalytic activity of Ag coated ZnO photocatalysts.