Synergistic degradation of 4-chlorophenol by persulfate and oxalic acid mixture with heterogeneous Fenton like system for wastewater treatment: Adaptive neuro-fuzzy inference systems modeling

Harnessing bromide ions to boost peroxymonosulfate for reactive yellow 145 dye degradation

Bromide (Br-) was found in the fresh waters at concentrations from 0.1 to 1 mg/L and can be used to activate peroxymonosulfate (PMS) as a widely used chemical oxidation agent. In the present study, the reaction between PMS and Br- ions (PMS/Br- process) for the effective degradation of reactive yellow 145 (RY-145) dye was investigated by changing operational parameters vis solution pH, dosage of Br- ions and PMS, RY-145 concentration, and reaction time. Based on the results, the simultaneous presence of PMS and Br- ions in the solution led to efficient degradation of RY-145 with a synergistic index of 11.89. The degradation efficiency of RY-145 was decreased in severe basic pH and the presence of CO32- ions as a coexisting anion. Likewise, 4 mg/L of humic acid (HA), used as a classic scavenger, led to a 26.53% decrease in the RY-145 degradation efficiency. The free bromine (HOBr/OBr-), superoxide radical (●O2-), and singlet oxygen (1O2) was the dominant oxidation agents in RY-145 degradation, which confirmed the nonradical degradation pathway. In addition, PMS/Br- process showed excellent ability in mineralizing RY-145 in different aqueous solutions (total organic carbon (TOC) decreased 86.39% in deionized water and 78.23% in tap water). Although pollutants such as azo dyes can be effectively removed in the PMS/Br- process, the formation of byproducts should be strategically controlled and special attention should be paid when the PMS-based advance oxidation process is applied to treat Br- containing solutions.

Unique effect of bromide ion on intensification of advanced oxidation processes for pollutants removal: A systematic review

Advanced oxidation processes (AOPs) have been developed to decompose toxic pollutants to protect the aquatic environment. AOP has been considered an alternative treatment method for wastewater treatment. Bromine is present in natural waters posing toxic effects on human health and hence, its removal from drinking water sources is necessary. Of the many techniques advanced oxidation is covered in this review. This review systematically examines literature published from 1997 to April 2024, sourced from Scopus, PubMed, Science Direct, and Web of Science databases, focusing on the efficacy of AOPs for pollutant removal from aqueous solutions containing bromide ions to investigate the impact of bromide ions on AOPs. Data and information extracted from each article eligible for inclusion in the review include the type of AOP, type of pollutants, and removal efficiency of AOP under the presence and absence of bromide ion. Of the 1784 documents screened, 90 studies met inclusion criteria, providing insights into various AOPs, including UV/chlorine, UV/PS, UV/H2O2, UV/catalyst, and visible light/catalyst processes. The observed impact of bromide ion presence on the efficacy of AOP processes, alongside the AOP method under scrutiny, is contingent upon various factors such as the nature of the target pollutant, catalyst type, and bromide ion concentration. These considerations are crucial in selecting the best method for removing specific pollutants under defined conditions. Challenges were encountered during result analysis included variations in experimental setups, disparities in pollutant types and concentrations, and inconsistencies in reporting AOP performance metrics. Addressing these parameters in research reports will enhance the coherence and utility of subsequent systematic reviews.

Mesoporous bimetallic S-doped nanoparticles prepared via hydrothermal method for enhanced photodegradation of 4-chlorophenol

Magnesium oxides (MgO) have gained shown significant promise for a variety of applications, which can be modified by ions doping. In this study, bimetallic Ag-doped S-MgO nanoparticles were prepared by hydrothermal method and used for photocatalytic degradation of 4-chlorophenl (4-CP). EDX suggested the presence of no impurities, which mainly contained Mg, Ag, and S elements, suggesting that S and Ag were incorporated into the lattice of MgO as a result of successful doping. Estimated bandgap of Ag-doped S-MgO nanoparticles was 3.7 eV, lower than MgO (7.8 eV), but useful to improve optical characteristics and photocatalytic efficiency to degrade 4-CP up to a maximum of 99.60 ± 0.50%. The synergetic parameter during photocatalysis of 4-CP was 6.91, confirming the degradation of 4-CP. Quenching experiments proved the presence of hydroxyl radicals (•OH) and singlet dioxygen (1O2) that were critical in 4-CP degradation. The kinetics rate constant was increased by 24.8% from 0.086 ± 0.004 to 0.108 ± 0.005 min-1 by the addition of sulfate in the reaction medium. The work proposes a new synthetic method for preparing catalysts that are capable of producing in-situ •OH radicals and 1O2 to decompose the organic contaminants.

NiFe-PANI composites synthesized by electrodeposition for enhanced photocatalytic degradation of diclofenac sodium from wastewater

A simple inexpensive approach was used to synthesize NiFe-PANI nanocomposites and used for photodegradation of diclofenac sodium (DCF) in water sources. Morphological, optical, structural, and catalytic properties of the nanocomposites were investigated using X-ray diffraction (XRD) to confirm the cubic structure of NiFe nanoparticles and Fourier-transform infrared spectroscopy (FTIR) that revealed the presence of NiFe and PANI, scanning electron microscopy (SEM) showed the uniform distribution of NiFe nanoparticles onto the surface of PANI, Energy-Dispersive X-ray spectroscopy (EDX) was utilized to validate the composition of the obtained Permalloy NiFe-PANI nanocomposites, optical properties confirmed the decrease of Eg band gap from 2.62 to 2.51 eV by the addition of NiFe. The NiFe-PANI composite showed superior photocatalytic efficiency in degrading DCF, achieving 82.53% degradation in 15 min and 97.89% in 60 min. This was significantly higher than the PANI alone, which achieved 62.72 and 93.48% degradation in the same time intervals respectively. The results indicated that the photocatalytic efficiency remained consistent, with no observable decrease, even after five cycles of recycling. The NiFe-PANI catalyst served as an efficient and cost-effective photocatalyst for DCF degradation, and the study holds promise for the photocatalytic removal of other organic pollutants from water and wastewater.

Ultrasound enhanced destruction of tetracycline hydrochloride with peroxydisulfate oxidation over FeS/NBC catalyst: Governing factors, strengthening mechanism and degradation pathway

In this study, FeS/N-doped biochar (NBC) derived from the co-pyrolysis of birch sawdust and Mohr's salt was applied to evaluate the efficiency of catalyzed peroxydisulfate (PDS) oxidation for tetracycline (TC) degradation. It is found that the combination of ultrasonic irradiation can distinctly enhance the removal of TC. This study investigated the effects of control factors such as PDS dose, solution pH, ultrasonic power, and frequency on TC degradation. Within the applied ultrasound intensity range, TC degradation increases with increasing frequency and power. However, excessive power can lead to a reduced efficiency. Under the optimized experimental conditions, the observed reaction kinetic constant of TC degradation increased from 0.0251 to 0.0474 min-1, with an increase of 89%. The removal ratio of TC also increased from ∼85% to ∼99% and the mineralization level from 45% to 64% within 90 min. Through the decomposition testing of PDS, reaction stoichiometric efficiency calculation, and electron paramagnetic resonance experiments, it is shown that the increase in TC degradation of the ultrasound-assisted FeS/NBC-PDS system was attributed to the increase in PDS decomposition and utilization, as well as the increase in SO4•- concentration. The radical quenching experiments showed that SO4•-, •OH, and O2•- radicals were the dominant active species in TC degradation. TC degradation pathways were speculated according to intermediates from HPLC-MS analysis. The test of simulated actual samples showed that dissolved organic matter, metal ions, and anions in waters can undercut the TC degradation in FeS/NBC-PDS system, but ultrasound can significantly reduce the negative impact of these factors.

Biological 2,4,6-trinitrotoluene removal by extended aeration activated sludge: optimization using artificial neural network

Serious health issues can result from exposure to the nitrogenous pollutant like 2,4,6-trinitrotoluene (TNT), which is emitted into the environment by the munitions and military industries, as well as from TNT-contaminated wastewater. The TNT removal by extended aeration activated sludge (EAAS) was optimized in the current study using artificial neural network modeling. In order to achieve the best removal efficiency, 500 mg/L of chemical oxygen demand (COD), 4 and 6 h of hydraulic retention time (HRT), and 1-30 mg/L of TNT were used in this study. The kinetics of TNT removal by the EAAS system were described by the calculation of the kinetic coefficients K, Ks, Kd, max, MLSS, MLVSS, F/M, and SVI. Adaptive neuro fuzzy inference system (ANFIS) and genetic algorithms (GA) were used to optimize the data obtained through TNT elimination. ANFIS approach was used to analyze and interpret the given data, and its accuracy was around 97.93%. The most effective removal efficiency was determined using the GA method. Under ideal circumstances (10 mg/L TNT concentration and 6 h), the TNT removal effectiveness of the EAAS system was 84.25%. Our findings demonstrated that the artificial neural network system (ANFIS)-based EAAS optimization could enhance the effectiveness of TNT removal. Additionally, it can be claimed that the enhanced EAAS system has the ability to extract wastewaters with larger concentrations of TNT as compared to earlier experiments.

Hydrothermally improved natural manganese-containing catalytic materials to degrade 4-chlorophenol

Natural manganese-containing mineral (NMM) was used as a catalyst in heterogeneous catalytic ozonation for 4-chlorophenol (4-CP) degradation. The surface and structural properties of NMM were modified by the hydrothermal aging process and called H-NMM. The catalytic activity of NMM and H-NMM were evaluated for the catalytic ozonation process (COP). The synergistic effect of NMM and H-NMM in ozonation processes for 4-CP degradation under optimal conditions (pH of 7, 1 g/L of NMM and H-NMM, 0.85 mg/min of O₃, and 15 min of reaction time) was measured by 3.04 and 4.34, respectively. During the hydrothermal process, Mn⁴⁺ and Fe²⁺ were converted to Mn²⁺ and Fe³⁺, which caused better performance of the H-NMM than the NMM. During the catalytic ozonation process, Mn²⁺ is completely oxidized, which increases the production of Hydroxyl radical (•OH). The reactive oxygen species (ROS) generated in the system were identified using radical scavenging experiments. •OH, superoxide radical (•O₂^-), and singlet oxygen (¹O₂) represented the dominant reactive species for 4-CP degradation. The O₃/H-NMM process indicated a powerful ability in the mineralization of 4-CP (66.31% of TOC degradation). H-NMM exhibited excellent stability and reusability in consecutive catalytic cycles, and the NMM exhibited desirable performance. This study offers NMM and H-NMM as effective, stable, and competitive catalysts for hastening and enhancing the ozonation process to mitigate environmentally related pollutants of high concern.

Degradation of 2,4-diclorophenol via coupling zero valent iron and hydrodynamic cavitation for sulfite activation: A turbulence modeling

The 2,4-dichlorophenol (2,4-DCP) is an important chemical precursor that can affect human endocrine system and induce pathological symptoms. This research reports the degradation of 2,4-DCP using lab-scale hydrodynamic cavitation (HC) approach, which is considered a green and effective method. To promote the degradation efficiency, the zero-valent iron (Fe⁰) as the catalyst for sulfate radical (SO₄^•-) generation via activation of sulfite (SO₃^2-) salts was simultaneously used. Degradation efficiency was favorable in acidic pH than the alkaline pH due to higher production of active radicals and was dependent on the dose of Fe⁰ and SO₃^2-. Under optimal condition, degradation efficiency by Fe⁰/HC/sulfite (96.67 ± 2.90%) was considerably enhanced compared to HC alone (45.37 ± 2.26%). Quenching experiments suggested that SO₄^•-, ^•OH, ¹O₂, and O₂^•- radicals were involved in the degradation of 2,4-DCP by Fe⁰/HC/sulfite process, but the dominant role was related to ^•OH (70.09% contribution) and SO₄^•- (29.91% contribution) radicals. From the turbulence model, turbulent pressure at venturi throat decreased from -0.42 MPa to -2.02 MPa by increasing the inlet pressure from 1.0 to 4.0 bar and increase in pressure gradient has intensified bubble collapse due to higher turbulence tension.

Studies on Synthesis, Characterization, and Photocatalytic Activity of TiO2 and Cr-Doped TiO2 for the Degradation of p-Chlorophenol

TiO₂ and Cr-TiO₂ nanoparticles (NPs) have been synthesized by the sol-gel method using titanium isopropoxide as the precursor of Titania. The prepared samples were analyzed by employing scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Fourier transform infrared analyses. Under UV irradiation, the photocatalytic activities of TiO₂ and Cr-TiO₂ were observed by estimating the % degradation of p-chlorophenol (PCP) as a sample pollutant. The extent of degradation was investigated, varying the catalyst dosage, initial PCP concentration, irradiation time, and solution pH. The experimental results show that efficiency of catalysts initially increases but decreases later on, whereas the % degradation of PCP is the highest at its lowest initial concentration. For TiO₂ and Cr-TiO₂ NPs at their optimal catalyst dosage of 2.0 g/L, acidic pH, and with UV irradiation for 90 min, the observed % degradation of PCP is 50.23 ± 3.12 and 66.51 ± 2.14%, respectively. Thus, the prepared Cr-TiO₂ NPs have enhanced the degradation efficiency of PCP with an irradiation time which is four time less than those reported earlier. From the kinetics analysis, the degradation reaction of PCP is found to follow a pseudo-first-order model and the rate constants are 0.0075 and 0.0122 min^-1 for pure TiO₂ and Cr-TiO₂ NPs, respectively. The present study has further revealed that owing to the lower rate of electron-hole pair recombination, the photocatalytic activity of Cr-TiO₂ NPs becomes higher than that of TiO₂. Therefore, as viable photocatalytic agents, Cr-TiO₂ NPs are suggested to be used also for efficient degradation of other organic pollutants.

Degradation of 4-chlorophenol using MnOOH and γ-MnOOH nanomaterials as porous catalyst: Performance, synergistic mechanism, and effect of co-existing anions

Transition metal catalysts have been proven to be a highly-potent catalyst for peroxymonosulfate (PMS) activation. The present work aimed to synthesizes the γ-MnOOH and MnOOH based on the one-pot hydrothermal method as PMS activators for efficient degradation of 4-chlorophenol (4-CP). The effect of operational parameters including solution pH, γ-MnOOH and MnOOH dose, PMS dose, 4-CP concentration, and also mixture media composition was elaborated. The results showed that the combination of MnOOH and γ-MnOOH with PMS noticeably creates a synergistic effect (SF) in 4-CP degradation by both PMS/MnOOH and PMS/γ-MnOOH process, with a SF value of 48.14 and 97.42, respectively. In both systems, the removal of 4-CP decreased in severely alkaline and acidic conditions, while no significant changes were observed in pH 5 to 9. Also, coexisting PO₄³- significantly reduced the removal efficiency of both systems. In addition, the effect of humic acid (HA) as a classical scavenger was investigated and showed that presence of 4 mg/L HA reduced the removal efficiency of 4-CP in the PMS/MnOOH process from 97.44% to 79.3%. The three consecutive use of both catalysts turned out that MnOOH has better stability than γ-MnOOH with lower Mn ions leaching. More importantly, quenching experiment showed that both non-radical (¹O₂ and O₂^-) and radical (SO₄^- and OH) pathways are involved in 4-CP degradation and non-radical pathway was the dominant one in both systems.

New combination of pulsed light and iron (II) for carbonate radical production to enhanced degradation of bisphenol A: Parameter optimization and degradation pathway

Bisphenol A(BPA) is a common industrial chemical with significant adverse impacts on Environment and human health. The present work evaluates the efficacy of pulsed light (PL) and Fe²⁺ ions in activation of sodium percarbonate (SPC) to produce hydroxyl (OH^•) and carbonate (CO₃^•-) radicals for efficient degradation of BPA. The effects of operational parameters such as solution pH, SPC and Fe²⁺ dose as well as the mixture composition were analyzed and the decomposition pathway of BPA proposed. The BPA was successfully degraded at the initial concentration of 15.0 mg/L and optimized conditions by the PL/Fe²⁺/SPC process (99.67 ± 0.29%). A rapid reduction in the degradation of BPA was observed with increasing pH due to OH^• radicals quenching and also the precipitation of Fe²⁺. Under the optimized conditions, degradation of BPA by PL/Fe²⁺/SPC process was five-times faster than the individual process. The quenching experiments revealed that radical and non-radical pathways on BPA degradation was accomplished with OH^•, CO₃^•-, O₂^•-, and ¹O_2, while OH^• and CO₃^•- radicals (as a dominant radicals) have the contributions of 80.23% and 8.30%, respectively. Based on the detected byproducts, ring cleavage can be considered as the main transformation mechanism of BPA by the PL/Fe²⁺/SPC process.

Using Sono-Electro-Persulfate Process for Atenolol Removal from Aqueous Solutions: Prediction and Optimization with the ANFIS Model and Genetic Algorithm

Atenolol (ATN) is a drug that is widely used to treat some heart diseases, and since it cannot be completely decomposed in the human body, some amounts of it are found in surface water. These amounts may bring risks to the environment and humans, and for this reason, its removal is a must. In the present study, the combined sono-electro-persulfate method was used for ATN removal. Based on the design of the experiment conducted by response surface methodology (RSM), the effects of 5 main factors (pH, time, PS concentration, current intensity, and initial ATN concentration) have been investigated at 5 levels. After passing the test steps in different conditions, the remaining amount of ATN has been measured by high-performance liquid chromatography (HPLC). Finally, an adaptive neuro-fuzzy inference system (ANFIS) with 99.63% accuracy and a genetic algorithm (GA) were used to analyze and interpret data and predict optimal conditions. The obtained results indicate the possibility of a maximum efficiency of 99.8% in the mentioned conditions (Ph of 7.4, time of 18 min, PS concentration of 2000 mg/L, current intensity of 3.35 A, and initial ATN concentration of 11.2 mg/L). According to the obtained results, the initial concentration of ATN can be considered as the most effective factor in this process, and the best Ph range for this experiment was the neutral range. The sono-electro persulfate process can be mentioned as a new and effective method for removing ATN from water sources.

Leveraging the potential of silver nanoparticles-based materials towards sustainable water treatment

Increasing demand of pure and accessible water and improper disposal of waste into the existing water resources are the major challenges for sustainable development. Nanoscale technology is an effective approach that is increasingly being applied to water remediation. Compared to conventional water treatment processes, silver nanotechnology has been demonstrated to have advantages due to its anti-microbial and oligodynamic (biocidal) properties. This review is focused on environmentally friendly green syntheses of silver nanoparticles (AgNPs) and their applications for the disinfection and microbial control of wastewater. A bibliometric keyword analysis is conducted to unveil important keywords and topics in the utilisation of AgNPs for water treatment applications. The effectiveness of AgNPs, as both free nanoparticles (NPs) or as supported NPs (nanocomposites), to deal with noxious pollutants like complex dyes, heavy metals as well as emerging pollutants of concern is also discussed. This knowledge dataset will be helpful for researchers to identify and utilise the distinctive features of AgNPs and will hopefully stimulate the development of novel solutions to improve wastewater treatment. This review will also help researchers to prepare effective water management strategies using nano silver-based systems manufactured using green chemistry.

The identification of byproducts from the catalytic reduction reaction of 4-nitrophenol to 4-aminophenol: A systematic spectroscopic study

Acetaminophenol, commonly recognized as paracetamol (considered safer than aspirin) is formed by nitration of phenol (4-nitrophenol (4-NP)) for its conversion to 4-aminophenol (4-AP), followed by the acetylation for the final product. As 4-NP is an intermediate product in acetaminophenol (paracetamol) production from phenol the dynamic analysis of acetylation of amine group is important. This study focuses on the feasibility of spectroscopic studies to monitor the removal of 4-NP using sodium borohydride (NaBH₄) probe reaction in the presence of silver, gold, and bimetallic Ag/Au nanoparticles. UV-visible absorbance and fluorescence spectroscopy measurements reveal the formation of 1,4-benzoquinone (BQ), hydroquinone (HQ), and phenol (Ph) as the final products, in addition to the formation of typically reported 4-AP. The intermediates of NaBH₄ seem to play a significant role in the formation of BQ, which converts to HQ in the basic medium followed by the formation of phenol in an acidic medium. Complete kinetic analysis with respect to spectroscopic studies of the standard compounds is presented. Similar results were obtained with 4-NP spiked river and seawater samples. The present findings may lead to catalytic benchmarking that can differ from most of the current practices and highlight the importance of adopting a holistic approach towards the fundamental understanding of 4-NP catalytic reduction that must take into account the concentration of NaBH₄ and pH interdependencies.

Direct red 89 dye degradation by advanced oxidation process using sulfite and zero valent under ultraviolet irradiation: Toxicity assessment and adaptive neuro-fuzzy inference systems modeling

Sulfate-based advanced oxidation process mediated by zero-valent iron (ZVI) and ultraviolet radiation for the decomposition of sulfite salts resulted in the formation of strong oxidizing species (sulfate and hydroxide radicals) in aqueous solution is reported. Degradation of direct red 89 (DR89) dye via UV/ZVI/sulfite process was systematically investigated to evaluate the effect of pH, ZVI dose, sulfite, initial DR89 concentration, and reaction time on DR89 degradation. The synergy factor of UV/ZVI/sulfite process was found to be 2.23-times higher than the individual processes including ZVI, sulfite and UV. By increasing the ZVI dose from 100 mg/L to 300 mg/L, dye degradation was linearly enhanced from 67.12 ± 3.36% to 82.40 ± 4.12% by the UV/ZVI/sulfite process due to enhanced ZVI corrosion and sulfite activation. The highest degradation efficiency of 99.61 ± 0.02% was observed at pH of 5.0, [ZVI]₀ = 300 mg/L, and [sulfite]₀ = 400 mg/L. Toxicity assessment by Lepidium sativum demonstrated that treated dye solution by UV/ZVI/sulfite was within the non-toxic range. The application of optimal adaptive neuro-fuzzy inference system (ANFIS) to predict DR89 degradation indicated high accuracy of ANFIS model (R² = 0.97 and RMSE = 0.051) via the UV/ZVI/sulfite process. It is suggested that UV/ZVI/sulfite process is suitable for industrial wastewater treatment.

Fabrication of ZnAl-LDH mixed metal-oxide composites for photocatalytic degradation of 4-chlorophenol

In this work, two different types of ZnAl-layered double hydroxide (LDH) mixed metal-oxide composites (CeO₂ and SnO₂) were synthesized and applied for the photodegradation of 4-chlorophenol (4-CP) in wastewater. The fabricated CeO₂/ZnAl-LDH and SnO₂/ZnAl-LDH were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, UV-visible diffuse reflectance spectroscopy (UV-vis DRS), and theoretical density functional theory (DFT) calculations, suggesting that the band gaps of the synthesized hybrid composites were much lower than those of traditional ZnAl-LDH. In addition, the photocatalytic activity for 4-CP degradation and reaction kinetics were investigated to evaluate the catalytic behavior of the prepared composites. The results indicated that the photocatalytic process in this case followed a pseudo-first-order kinetic model, and SnO₂/ZnAl-LDH illustrated the optimum performance for 4-CP degradation with an efficiency of 95.2% due to its stability and recyclability. Additionally, the reaction mechanism of 4-CP photodegradation was studied over SnO₂/ZnAl-LDH; it presented that 4-CP could be oxidized by hydroxyl radicals, holes, and superoxide radicals, where hydroxyl radicals were identified as the dominant active species during the degradation process. Finally, decomposition intermediates were measured to deduce the reaction pathway of 4-CP, and three tentative pathways were proposed and discussed.

High surface area acid-treated biochar from pomegranate husk for 2,4-dichlorophenol adsorption from aqueous solution

In the present study, zinc chloride (ZnCl₂) followed by acid treating was employed for the fabrication of activated biochar from pomegranate husk (APHBC) for 2,4-dichlorophenol (2,4-DCP) adsorption from an aqueous solution. The batch adsorption experiments were carried out as a function of solution pH, APHBC dose, initial 2,4-DCP concentration, contact time, and ionic strength. The APHBC showed a well-developed pore with specific surface areas of 1576 m²/g due to explosive characteristics of ZnCl₂. In addition, the XRD analysis showed that the diffraction peaks between 15 and 35° corresponded to amorphous carbon. The pore size distribution results showed that APHBC was dominantly mesoporous materials. The pH_pzc value of APHBC was 6.15 ± 0.15. According to batch experiments, the optimum adsorption conditions were pH of 3.0, contact time 60 min, APHBC dose of 1.75 g/L and without ionic strengths. The absorption capacity of 2,4-DCP at the initial concentration of 150.0 mg/L promptly decreased from 259.5 ± 12.9 to 74.5 ± 3.7 mg/g as the APHBC dose increased from 0.50 to 2.00 g/L. The isotherm and kinetics study of 2,4-DCP adsorption by APHBC revealed that Liu and Avrami fractional-order well fitted with experimental data, respectively.

Enhanced removal of humic acid from piggery digestate by combined microalgae and electric field

Microalgae technology is a promising method for treating piggery digestate, while its removal ability of humic acids (HAs) is poor. Here, an electric field-microalgae system (EFMS) was used to improve the removal of HAs from the piggery digestate. Results indicated that the removal of HAs by EFMS relied on the initial concentration of HAs, electrical intensity, the initial inoculation concentration of microalgae and pH. Values of these parameters were optimized as electrical intensity of 1.2 V/cm, microalgae initial inoculation concentration of 0.1 g/L and pH 5.0. The HAs removal efficiency by EFMS (55.38%) was 13% and 38% higher than that by single electric field and microalgal technology. It was observed that oxidation, coagulation and assimilation contributed to the removal of HAs, suggesting that EFMS could serve as an attractive and cost-effective technique for the removal of HAs from the piggery digestate.

Magnetized Activated Carbon Synthesized from Pomegranate Husk for Persulfate Activation and Degradation of 4-Chlorophenol from Wastewater

The compound 4-chlorophenol (4-CP) is known to be a highly toxic compound having harmful effects on human health and the environment. To date, the removal of 4-CP by advanced oxidation processes (AOPs) has attracted tremendous attentions. The persulfate-based AOPs show higher oxidation, better selectivity, wider pH range, and no secondary pollution compared to the traditional Fenton-based AOPs. Carbon materials with low cost and chemical stability are useful for the activation of persulfate (PS) to produce reactive species. Herein, we magnetized activated carbon synthesized from pomegranate husk (MPHAC). By using 4-CP as a model organic pollutant, tests of the activation of PS via MPHAC for the removal of 4-CP were performed. Batch processes were carried out to study the influence of different parameters (initial solution pH, catalyst dose, PS dose, and initial 4-CP concentration) on the adsorption of 4-CP on PHAC with ferric oxide (Fe3O4-PHAC). The results show that under the obtained optimal conditions (MPHAC dose: 1250 mg/L, PS dose: 350 mg/L, solution pH 5, an initial 4-CP concentration of 100 mg/L, and a contact time of 60 min), a 4-CP removal factor of 99.5% was reached by the developed MPHAC/PS system. In addition, it was found that reusing MPHAC in five successive cycles is feasible because the catalyst in the last cycle kept exhibiting a high potential for 4-CP absorption, indicating the economically viable procedure. Therefore, this study provides a comprehensive understanding on the degradation of 4-CP by the magnetized activated carbon persulfate system.

The construction of a palladium–hydrogen accelerated catalytic Fenton system enhanced by UiO-66(Zr)

The introduction of H2 and Pd/UiO-66(Zr) accelerated the FeII/FeIII cycle and led to higher contaminant degradation using only a trace level of FeII in several reaction cycles.

Reusable Ag@TiO2-Based Photocatalytic Nanocomposite Membranes for Solar Degradation of Contaminants of Emerging Concern

Two significant limitations of using TiO2 nanoparticles for water treatment applications are reduced photocatalytic activity under visible radiation and difficulty recovering the particles after use. In this study, round-shaped Ag@TiO2 nanocomposites with a ≈21 nm diameter and a bandgap energy of 2.8 eV were synthesised by a deposition-precipitation method. These nanocomposites were immobilised into a porous poly (vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) matrix and well-distributed within the pores. The photocatalytic activity of Ag@TiO2/PVDF-HFP against metronidazole (MNZ) under solar radiation was evaluated. Further, an adaptive neuro-fuzzy inference system (ANFIS) was applied to predict the effect of four independent variables, including initial pollutant concentration, pH, light irradiation intensity, and reaction time, on the photocatalytic performance of the composite membrane on MNZ degradation. The 10% Ag@TiO2/PVDF-HFP composite membrane showed a maximum removal efficiency of 100% after 5 h under solar radiation. After three use cycles, this efficiency remained practically constant, demonstrating the membranes' reusability and suitability for water remediation applications.

Artificial intelligence modeling to predict transmembrane pressure in anaerobic membrane bioreactor-sequencing batch reactor during biohydrogen production

The complex nature of wastewater treatment has led to search for alternative strategies such as different artificial intelligence (AI) techniques to model the various operational parameters. The present work is aimed at predicting the transmembrane pressure (TMP) as a key operational parameter in the case of anaerobic membrane bioreactor-sequencing batch reactor (AnMBR-SBR) during biohydrogen production using the adaptive neuro-fuzzy inference systems (ANFIS) and artificial neural network (ANN). In both the models, organic loading rates (OLR) ranging from 0.5 to 8.0 g COD/L/d, effluent pH (3.6-6.9), mixed liquor suspended solid (4.6-21.5 g/L) and mixed liquor volatile suspended solid (3.7-15.5 g/L) were used as the input parameters to test TMP as an output parameter. The ANFIS model was trained using the hybrid algorithms for TMP prediction. The higher prediction performance was obtained by using the Gauss membership function with four membership numbers. A back-propagation algorithm was also employed for the feed forward training of ANN model; the best structure was a Levenberg-Marquardt training algorithm with nine neurons in the hidden layer. By employing ANFIS and ANN models, relatively a good prediction of TMP was obtained with the R² values of 0.93 and 0.88, respectively while the calculated mean square error for TMP in the ANFIS model (7.3 × 10^-3) was lower than that of ANN model (8.02 × 10^-3). The higher R² and lower MSE values for the ANFIS model exhibited a better TMP prediction performance than the ANN model. Finally, it was observed that in the sensitivity analysis of ANN model, OLR was the most important input parameter on the variation of TMP.

Advanced oxidation of 4-chlorophenol via combined pulsed light and sulfate radicals methods: Effect of co-existing anions

Pulsed light (PL) technology, which is based on photonic technology involves the application of broadband emission of light with short and high-power pulses is beginning to emerge for the treatment of wastes via advanced oxidation processes (AOP). The present work investigates the efficiency of PL as a light source for persulfate (PS) activation (PL/PS) and 4-chlorophenol)4-CP) degradation, an organic model pollutant. The influencing parameters on 4-CP degradation such as solution pH, reaction time, initial concentration of 4-CP, PS dose, pulse intensity and frequency, and distance from PL source are systematically investigated. With increasing pH from 3 to 9, the 4-CP degradation decreased from 49.79 ± 2.49 to 33.12 ± 1.66%. The 4-CP degradation followed the first order kinetics that was improved with increasing reaction time, PS dose, pulse intensity, frequency of pulse, and decreasing pH, initial 4-CP concentration and distance from the PL source. The presence of sulfate, chloride, and carbonate anions in the solution has the inhibitory effects on 4-CP degradation, while nitrate anion improved the performance of PL/PS system. In addition, presence of humic acid had an inhibitory effect on the PL/PS system, which led to a decrease of reaction rate constant and 4-CP degradation was performed in PL/PS system with OH, SO₄^-, O₂^- and ₁O² radicals. The contributions of OH and SO₄^- radicals were 46% and 51%, respectively for the 4-CP degradation and synergistic effect of PL/PS system showed a significant influence on 4-CP degradation while using a combination of PL and PS, suggesting that PL is an effective activator of PS.

Fabrication of activated carbon from pomegranate husk by dual consecutive chemical activation for 4-chlorophenol adsorption

In the present work, the fabrication of activated carbon (AC) from pomegranate husk (PHAC) by dual consecutive activation processes with ZnCl₂ and NaOH as a chemical agent was studied. After that, the synthesized PHAC was used for adsorption of 4-chlorophenol (4CP) as a highly toxic compound for the human health and the environment. Different analytical techniques characterized the synthesized PHAC using ZnCl₂/NaOH. The isotherms of N₂ adsorption and desorption showed that total pore volume (V_total) and specific surface area (S_BET) of PHAC were 0.404 cm³/g and 811.12 m²/g, respectively. The 4CP adsorption by PHAC studies revealed that the highest 4CP removal efficiency was 100% and obtained at 50, 100, and 150 mg/L of 4CP concentration with 2.5 g/L of PHAC. Based on the batch experiments, the highest 4CP removal was achieved at pH 6, 2.5 g/L of PHAC, and contact time of 60 min. The 4CP adsorption data of equilibrium and kinetics were successfully fitted to Langmuir's isotherm and Avrami fractional order.

Degradation of anthraquinone dye reactive blue 19 using persulfate activated with Fe/Mn modified biochar: Radical/non-radical mechanisms and fixed-bed reactor study

In this study, a heterogeneous activator was prepared via the Fe/Mn modification of sludge-derived biochar (Fe/MnBC) to achieve high-efficiency activation of persulfate (PS) for reactive blue 19 (RB19) degradation. The morphologies and chemical states of Fe/MnBC were examined by various characterizations. A comprehensive assessment was conducted to reveal the effects of biochar preparation conditions and system reaction conditions. According to the results of scavenger quenching experiments and electron paramagnetic resonance (EPR) testing, the mechanisms of Fe/MnBC combined PS system on RB19 degradation were proposed, including radical and non-radical mechanisms. The formation and involvement of sulfate radical (SO₄^·-), hydroxyl radical (OH^·), and singlet oxygen (¹O₂) were proved in this system, and Fe(IV)/Mn(VII) was also speculated to participate in the non-radical degradation process. These findings give a new insight into the mechanisms of PS activated by metal-biochar composite. Besides, fixed-bed reactor (FBR) experiments indicated that the Fe/MnBC has considerable PS activation potential for dyes removal. The degradation process was further modeled by the central composite design (CCD-RSM) and artificial neural networks (ANN) methods. The statistical metrics and prediction indicated that the prediction results of ANN model were better than CCD-RSM model, and the ANN model could perfectly predict the reaction process of Fe/MnBC FBR for engineering applications.