Endocrine-disruptive chemicals as contaminants of emerging concern in wastewater and surface water: A review

Thyroid Endocrine Disrupting Potential of Fluoxetine in Zebrafish Larvae

Fluoxetine (FLX), a typical selective serotonin reuptake inhibitors, has been frequently detected in aquatic environment and wild fish. However, little is known about its effect on thyroid endocrine system. In the present study, zebrafish (Danio rerio) embryos were exposed to 1, 3, 10, and 30 μg/L of FLX for 6 days. Chemical analysis demonstrated that FLX and its metabolic product (nonfluoxetine, NFLX) were accumulated in zebrafish larvae. The exposure resulted in decreased thyroid hormones (THs) levels, indicating thyroid endocrine disruption. Moreover, thyroid-stimulating hormone (TSH) content was significantly inhibited in a concentration-dependent manner after exposure to FLX. Gene transcription in the hypothalamic-pituitary-thyroid (HPT) axis was further examined, and the results showed that the genes encoding corticotrophin-releasing hormone (crh) and thyrotropin-releasing hormone (trh) were significantly up-regulated as a compensatory mechanism for the decreased TH contents accompanied with decreased tshβ mRNA expression. In addition, genes involved in thyroid hormone synthesis (sodium/iodide symporter, nis, thyroglobulin, tg) and transport (transthyretin, ttr) were down-regulated after exposure to FLX in a concentration-dependent manner. The increased gene transcription of deiodinases (dio2) and uridinediphosphate-glucuronosyltransferase (ugt1ab) might be responsible for the decrease of TH contents. In addition, a significant inhibition in thyroid hormone receptors (trα and trβ) gene expression was observed upon treatment with FLX. All these results demonstrated that FLX could alter THs and TSH content as well as gene transcription in the HPT axis, exerting an endocrine disruption of the thyroid system in zebrafish larvae.

Bioremediation of emerging pharmaceutical pollutants acetaminophen and ibuprofen by white-rot fungi - A review

Emerging pharmaceutical pollutants, such as acetaminophen and ibuprofen, are frequently detected in aquatic ecosystems due to their widespread use and persistence in the environment. Their continuous discharge into water bodies through municipal wastewater presents significant ecological risks, including bioaccumulation and toxicity to aquatic organisms. Extensive research on white-rot fungi has highlighted their exceptional capacity to oxidize diverse contaminants, emphasizing their promise for environmental cleanup. This article presents a detailed evaluation of the effectiveness of white-rot fungi and their ligninolytic enzymes in mitigating micropollutants, with a particular focus on pharmaceuticals such as acetaminophen and ibuprofen in aquatic environments. The aim is to provide a foundation for utilizing these fungi and their enzymes in the treatment of commonly used analgesics, discuss the occurrence, fate, and environmental impacts of these two pharmaceuticals, followed by an in-depth examination of white-rot fungi degradation mechanisms, including biosorption and enzymatic oxidation through their ligninolytic enzymes. The review highlights key fungal species, operational parameters influencing degradation efficiency, thereby promoting advancements in fungal enzyme production, and practical applications in pollutant removal.

Innovative eco-sustainable reishi mushroom-based adsorbents for progesterone removal and agricultural sustainability

The pervasive presence of endocrine-disrupting chemicals (EDCs), particularly progesterone, in aquatic ecosystems poses significant ecological and human health risks, necessitating the development of sustainable and efficient removal strategies. This study introduces an innovative, eco-friendly approach utilizing non-edible reishi mushroom (Ganoderma lucidum) and its calcined form as natural adsorbents for progesterone removal while simultaneously exploring the potential of the formed composites as sustainable agricultural amendments. The adsorption efficiency of both reishi mushroom powder and its calcined form was systematically optimized under varying pH, adsorbent dose, temperature, and contact time conditions. The adsorption capacities of reishi mushroom and its calcined form for progesterone were assessed using nine non-linear isotherm models. Among these, the Langmuir and Freundlich models provided the best fit to the experimental data (R 2 ∼ 0.99), demonstrating high adsorption capacities of 90.52 mg g-1 for reishi mushroom and 118.10 mg g-1 for calcined reishi mushroom under optimal conditions (pH 3, 25 °C, 0.1 g and 0.075 g doses, respectively) following pseudo-second-order and mixed-order kinetic models. Both materials were fully characterized before and after the adsorption process using XRD, FTIR, and SEM techniques. Thermodynamic analysis revealed the process to be exothermic, spontaneous, and highly ordered, driven by hydrophobic interactions and van der Waals forces. Molecular docking analysis shows that ganoderic acid A and progesterone bind strongly to key plant hormone receptors (GID1, TIR1, BRI1), indicating their potential to enhance plant growth by influencing gibberellin, auxin, and brassinosteroid signaling pathways. Beyond environmental remediation, the formed composites exhibited exceptional potential in enhancing agricultural productivity. Composite treatments, particularly progesterone adsorbed on calcined reishi mushroom, significantly improved seed germination rates (95%), shoot-to-root elongation (2.5 : 1), and overall plant growth (39 cm height, 200 g fresh weight). Soil quality assessments revealed increased organic matter content and improved fertility, highlighting the dual benefit of these adsorbents in environmental remediation and sustainable agriculture. The greenness profile of the proposed method, evaluated using NEMI, AGP, and Modified GAPI metrics, further underscores its eco-sustainability, with an eco-scale score of 94 and a BAGI blueness score of 75, affirming its alignment with green analytical chemistry principles. This study introduces a novel, cost-effective, and eco-friendly method for progesterone removal while pioneering the use of waste-derived adsorbents in circular agriculture. By utilizing reishi mushroom and its calcined form, this research addresses both water contamination and sustainable farming, advancing eco-friendly technologies.

Differential susceptibility of Leydig and Sertoli cells to bisphenol A

Bisphenol A (BPA) is an endocrine-disrupting chemical that is increasingly becoming a vital factor in public health due to its ubiquity and toxicity. BPA is associated with male infertility via the disrupted function of Leydig and Sertoli cells. Despite extensive research, the current understanding of the specific pathological concentrations and the mechanisms following BPA exposure still remain questionable. Therefore, we investigated the susceptibilities and underlying mechanisms in Leydig and Sertoli cells following treatment with various BPA doses (0.0001-100 µM in a 10-fold serial dilution). Our results showed that the lowest BPA levels (10-4 μM) decreased mitochondrial membrane potential and ATP levels. In contrast, ROS levels were increased at high BPA levels regardless of exposure time (24 or 48 h) in both cell types. Mitochondrial-mediated apoptosis was identified along with increased ROS levels and abnormal mitochondrial dynamics, but both cell types showed different susceptibility to BPA toxicity. Subsequently, BPA had detrimental impacts on the mRNA expression levels of steroidogenic enzymes and testosterone synthesis in Leydig cells and reduced anchoring junction proteins in Sertoli cells. Consequently, our results demonstrated that both cells were affected via estrogen receptor alpha. However, protein kinase A was oppositely expressed following BPA exposure in each cell type. Therefore, it is plausible to suggest that each cell has distinct sensitivities and mechanisms in response to BPA.

Greywater Reuse: Contaminant Profile, Health Implications, and Sustainable Solutions

Global water scarcity is becoming an increasingly critical issue; greywater reuse presents a promising solution to alleviate pressure on freshwater resources, particularly in arid and water-scarce regions. Greywater typically sourced from household activities such as laundry, bathing, and dishwashing, constitutes a significant portion of domestic wastewater. However, the reuse of greywater raises concerns about the potential risks posed by its complex composition. Despite the growing body of literature on greywater reuse, most studies only focus on specific contaminants, thus there is a limited understanding of the comprehensive profile of contaminants, health, and environmental effects associated with these pollutants. This review adds new knowledge through a holistic exploration of the composition and physico-chemical characteristics of greywater, with a focus on its organic and inorganic pollutants, heavy metals, EDCs, emerging microplastics, nanoparticles, and microbial agents such as bacteria, fungi, viruses, and protozoa. This review sheds light on the current state of knowledge regarding greywater pollutants and their associated risks while highlighting the importance of safe reuse. Additionally, this review highlights the removal of contaminants from greywater and the sustainable use of grey water for addressing water scarcity in affected regions.

Environmental life cycle of fentanyl: From the cradle to an unknown grave

The lack of available information on the presence and persistence of fentanyl in the environment is a significant gap in the technical literature. Although the origins of the opioid in the environment are well-known because they follow the same pathways of other drug-related environmental contaminants, the downstream effects of fentanyl in the water supply and its retention in soil are less understood. The characterization of fentanyl and its potential degradation products in complex environmental samples such as soil is severely understudied. Very few articles are available that work to identify fentanyl and its degradation products in complex samples or name the possible hazards that may result from environmental exposure and degradation. Therefore, the objectives were to identify available articles focused on environmental fentanyl and its pathways and highlight quantifiable research or results that included specific degradation products or downstream effects. Research articles focused on fentanyl between 2000 and 2024 were identified and reviewed and then filtered using Boolean search terms for environmental parameters. Various studies have determined that trace levels of fentanyl can be found in a variety of environments, and additional data suggest preferential partitioning into soils from water and long-term persistence. Despite this knowledge, very little data exists on the long-term downstream effects of fentanyl or its analogs. As the chronic effects from low-level fentanyl exposure are currently unknown, this lack of insight brings to the forefront the need for further research to improve our understanding of fentanyl persistence, degradation, and toxicity within the environment.

Systematic review on the effects of wastewater chemical composition on crop yield under fertigation practices

The escalating global demand for freshwater resources poses significant challenges to sustainable agricultural practices. This systematic review examines the influence of inorganic ions' concentration in wastewater on crop yields under fertigation, with a particular focus on compliance with the recommendations of FAO water quality standards. The review reveals that key nutrients, such as nitrates (NO₃-) and phosphates (PO₄3-), largely meet established thresholds, while sodium (Na+) and potassium (K+) frequently exceed permissible levels, threatening crop productivity, especially in salinity-sensitive species. Additionally, the study explores the effects of nutrient variability on crop performance across different soil types and cultivation environments. Statistical analyses were performed to assess chemical composition and their correlation with agricultural yields. The findings emphasize the critical need to adapt fertigation practices to the specific characteristics of soil and environmental conditions to optimize the benefits of wastewater reuse.

Biosurfactants, Polyhydroxyalkanoates, and Other Added-Value Products from Wastewater Electro-bioremediation: A New Biorefinery Concept

Electro-bioremediation of wastewater is a novel, nature-based solution towards clean water, based on microbial electrochemical technologies (METs). Electro-bioremediation technologies for wastewater treatment, except enhanced bioremediation results and renewable energy generation, offer an unlocked opportunity for harvesting by-products and using them in other applications. This concept contributes to circularity, sustainability, and environmental compatibility, mitigating the impact of climate change. In addition, wastewater valorization and, thus, water resilience are possible thereby leading to protection of water resources. Compounds and metabolites naturally synthesized by the microorganisms involved in the wastewater electro-assisted biodegradation, can result in the enhancement of both extracellular electron transfer (EET) and bioremediation. Such microbial products are added-value, natural, non-toxic and biodegradable such as biosurfactants (BSFs) and polyhydroxyalkanoates (PHAs). In this chapter, the effect of the presence of BSFs and PHAs in MET during electro-bioremediation, as well as when fed with conventional substrates, are exhaustively evaluated. The significance of BSFs even when they are added exogenously is also examined. The major categories of by-products biosynthesis including organic acids, biopolymers, recovered heavy metals and phenazines such as pyocyanin during electro-bioremediation processes are also discussed. Consequently, a future direction in wastewater electro-bioremediation is proposed.

Ozone-based advanced oxidation processes in water treatment: recent advances, challenges, and perspective

Water pollution, driven by a variety of enduring contaminants, poses considerable threats to ecosystems, human health, and biodiversity, highlighting the urgent need for innovative and sustainable treatment approaches. Ozone-based advanced oxidation processes (AOPs) have demonstrated significant efficacy in breaking down stubborn pollutants, such as organic micropollutants and pathogens, that are not easily addressed by traditional treatment techniques. This review offers an in-depth analysis of ozonation mechanisms, covering both the direct oxidation by ozone and the indirect reactions facilitated by hydroxyl radicals, emphasizing their effectiveness and adaptability across various wastewater matrices. Significant progress in the combination of ozonation with additional technologies, including UV irradiation, hydrogen peroxide (H₂O₂), catalytic systems, and biological treatments, is examined, highlighting their effectiveness in enhancing pollutant breakdown, increasing biodegradability, and reducing secondary pollution. Hybrid methods, including catalytic ozonation and ozone-biological treatment, show significant enhancements in process efficiency and cost-effectiveness, while effectively tackling challenges associated with energy use and byproduct generation. Despite the promising possibilities, obstacles remain, such as scalability issues, high operational costs, and the risk of generating potentially harmful transformation products. Cutting-edge approaches, including the creation of sophisticated catalysts, integration of processes, and refinement of reactor designs, are suggested to address these challenges and improve the real-world implementation of ozone-based advanced oxidation processes. This review highlights the significant potential of ozone-based advanced oxidation processes as sustainable approaches for wastewater treatment, providing an essential route to environmental conservation and safeguarding public health.

Real-time wastewater quality monitoring by fluorescence sensors: Validation for COD and CEC monitoring and implication for carbon footprint reduction

This study investigated the applicability of a protein-like fluorescence sensor for wastewater quality monitoring. Several wastewater matrices, including raw, primary, secondary and tertiary effluents from three different wastewater treatment plants were used. Furthermore, the sensor was tested for the monitoring of quaternary effluent in a pilot scale plant installed downstream of a water reuse facility. The pilot plant involved advanced oxidation processes (AOPs) and granular activated carbon (GAC) adsorption. Corrections on excitation/emission matrices (EEMs), including Inner Filter Effect (IFE) and scattering, showed no effect on linear correlation (R2=0.99) between sensor measurement and either raw or corrected benchtop protein-like fluorescence data, suggesting that for this application the signal from the sensor might be interpreted without the need for further adjustments. Furthermore, the use of quenched, diluted and filtered samples did not affect such correlations. Overall, the fluorescence sensor showed a very high capability to monitor a wide range of wastewater matrices, including raw, primary, secondary, tertiary, and quaternary effluents, providing fast information on the efficiency of the processes. The protein-like fluorescence monitoring by the real-time sensor was validated online through 9 days of 24-hour continuous monitoring of tertiary wastewater effluents. The employed fluorescence sensor was validated for monitoring the removal of contaminants of emerging concern (CEC), including a wide range of pharmaceuticals, in different AOP systems (ozone and UV based). In view of the results reported in this study, possible environmental implications for the reduction of the carbon footprint have emerged: the use of fluorescence sensors may contribute to the optimization of processes and the reduction of secondary pollution.

Treatment of effluent from municipal wastewater treatment plants using electrochemically produced Caro's acid

This work describes the application of electrochemically produced Caro's acid in a divided electrochemical flow cell for the removal of fourteen CECs from real effluent at a municipal wastewater treatment plant in Ciudad Real, Spain. The results are compared with direct dosing of the reagent (with an ionic/molecular oxidant) and radical-assisted oxidation (activated sulfate radical via photochemical oxidation or hydrogen peroxide-induced radical oxidation). This study sheds light on the underlying mechanisms of these processes. As well, the effect of these three technologies on effluent disinfection is evaluated. The results demonstrate that this treatment alternative efficiently destroys all monitored pollutants, reaching the detection limits of the analytical equipment.

Online control of UV and UV/H2O2 processes targeted for the removal of contaminants of emerging concern (CEC) by a fluorescence sensor

This study assessed the online and real-time monitoring of contaminants of emerging concern (CEC) using a microbial/tryptophan-like fluorescence sensor in a quaternary AOP (advanced oxidation process) pilot plant installed downstream of a tertiary municipal wastewater treatment plant (WWTP). Real-time fluorescence measurements were validated with lab-scale tryptophan-like fluorescence. Changes in water quality induced by different UV or UV/H2O2 doses were detected by the fluorescence sensor allowing real-time control of processes. The removal of CEC was discussed considering their photo-susceptibility and reactivity with •OH and then classified into three groups based on their reactivity and removal efficiency (RE). Linear models of CEC removal developed using real-time fluorescence removal as a surrogate parameter resulted very accurate (overall R2≥0.90) for most of CEC. Furthermore, real-time fluorescence data were successfully used to predict i) pseudo-observed first-order degradation rate constants of CEC (R2=0.99), and ii) UV doses during both UV and UV/H2O2 processes (R2>0.90). The findings of this study demonstrated that fluorescence sensors can be employed in operational relevant environment to monitor a broad range of CEC and control UV doses during UV-AOPs. Therefore, the implementation of fluorescence sensors is expected for optimizing costs, energy consumption and efficiency of quaternary wastewater treatments.

Occurrence and distribution of emerging contaminants in wastewater treatment plants: A globally review over the past two decades

Emerging contaminants are pervasive in aquatic environments globally, encompassing pharmaceuticals, personal care products, steroid hormones, phenols, biocides, disinfectants and various other compounds. Concentrations of these contaminants are detected ranging from ng/L to μg/L. Even at trace levels, these contaminants can pose significant risks to ecosystems and human health. This article systematically summarises and categorizes data on the concentrations of 54 common emerging contaminants found in the influent and effluent of wastewater treatment plants across various geographical regions: North America, Europe, Oceania, Africa, and Asia. It reviews the occurrence and distribution of these contaminants, providing spatial and causal analyses based on data from these regions. Notably, the maximum concentrations of the pollutants observed vary significantly across different regions. The data from Africa, in particular, show more frequent detection of pharmaceutical maxima in wastewater treatment plants.

Fluoxetine removal by anodic oxidation using different anode materials and graphite cathode

Fluoxetine (FLX) is a selective serotonin reuptake inhibitor (SSRI) medication commonly used to treat mental health disorders, but it can be harmful to the environment if not properly disposed of due to incomplete metabolism. In this study, electrochemical anodic oxidation with mixed metal oxide anodes was studied as a method to remove FLX from water and wastewater. Iridium dioxide-coated titanium (Ti/IrO2) and ruthenium dioxide-coated Ti (Ti/RuO2) electrodes were found to be more effective than platinum-coated Ti (Ti/Pt) electrodes, with removal efficiencies of 91.5% and 93.9%, respectively. Optimal conditions for FLX removal were determined to be an applied current of 150 mA, initial pH of 5, and oxidation time of 120 min. The rate of FLX degradation (kFLX) for the Ti/Pt, Ti/IrO2, and Ti/RuO2 electrodes were determined to be 0.0081 min-1 (R2:0,8161), 0.0163 min-1 (R2:0,9823), and 0.0168 (R2:0,9901) min-1 for 25 mg/L initial FLX concentration, respectively. The kFLX values varied based on the initial FLX concentration and decreased as the initial FLX concentration increased. The specific energy consumption (SEC) after 120 min of operation was 51.0 kWh/m3 for the Ti/Pt electrode, 39.6 kWh/m3 for the Ti/IrO2 electrode, and 48.6 kWh/m3 for the Ti/RuO2 electrode under optimised conditions. Overall, electrochemical anodic oxidation is an effective method for removing FLX from water and wastewater, with Ti/IrO2 and Ti/RuO2 electrodes providing superior performance compared to Ti/Pt electrodes.

Effect-directed analysis of endocrine and neurotoxic effects in stormwater depending discharges

The investigation of pollutant inputs via stormwater runoff and subsequent effects in receiving waters is becoming increasingly urgent in view of climate change with accompanying extreme weather situations such as heavy rainfall events. In this study, two sampling areas, one urban and one rural but dominated by a highway, were investigated using effect-directed analysis to identify endocrine and neurotoxic effects and potentially responsible substances in stormwater structures and receiving waters. For this purpose, a transgenic yeast cell assay for the simultaneous detection of estrogenic, androgenic, and progestogenic effects (YMEES) was performed directly on high-performance thin-layer chromatography (HPTLC) plates. Concomitantly, estrogens were analyzed by GC-MS/MS and other micropollutants typical for wastewater and stormwater by LC-MS/MS. Discharges from the combined sewer overflow (CSO) contribute a large portion of the endocrine load to the studied water body, even surpassing the load from a nearby wastewater treatment plant (WWTP). An effect pattern similar to the CSO sample was shown in the receiving water after the CSO with lower intensities, consisting of an estrogenic, androgenic, and progestogenic effect. In contrast, after the WWTP, only one estrogenic effect with a lower intensity was detected. Concentrations of E1, 17α-E2, 17β-E2, EE2, and E3 in the CSO sample were 2000, 410, 1100, 560, and 2700 pg/L, respectively. HPTLC-YMEES and GC-MS/MS complement each other very well and help to elucidate endocrine stresses. An Acetylcholinesterase (AChE) inhibitory effect could not be assigned to a causative compound by suspect and non-target analysis using LC-HRMS. However, the workflow showed how information from HPTLC separation, effect-based methods, and other meta-information on the sampling area and substance properties can contribute to an identification of effect-responsible substances. Overall, the study demonstrated that effect-based methods in combination with HPTLC and instrumental analysis can be implemented to investigate pollution by stormwater run-off particularly regarding heavy rain events due to climate change.

Metal-oxide nanocatalysts for spontaneous sequestration of endocrine-disrupting compounds from wastewater

The quest for a good life, urbanization, and industrialization have led to the widespread distribution of endocrine-disrupting chemicals (EDCs) in water bodies through anthropogenic activities. This poses an imminent threat to both human and environmental health. In recent years, the utilization of advance materials for the removal of EDCs from wastewater has attracted a lot of attention. Metal-oxide nanocatalysts have emerged as promising candidates due to their high surface area, reactivity, and tunable properties, as well as enhanced surface properties such as mesoporous structures and hierarchical morphologies that allow for increased adsorption capacity, improved photocatalytic activity, and enhanced selectivity towards specific EDCs. As a result, they have shown extraordinary efficacy in removing a wide range of EDCs from aqueous solutions, including pharmaceuticals, agrochemicals, personal care items, and industrial chemicals. This study give insight into the unique physicochemical characteristics of metal-oxide nanocatalysts to effectively and efficiently remove harmful EDCs from wastewater. It also discussed the advances in the synthesis, and properties of metal-oxide nanocatalysts, and insight into understanding the fundamental mechanisms underlying the adsorption and degradation of EDCs on metal-oxide nanocatalysts using advanced characterization techniques such as spectroscopic analysis and electron microscopy. The findings of the study present metal-oxide nanocatalysts as a good candidate for the spontaneous sequestration of EDCs from wastewater is an intriguing approach to mitigating water pollution and safeguarding public health and the environment.

The last decade epidemiologic concern of drinking water contaminants of emerging concern (CECs) in Asian Countries: A scoping review

With the rapid industrialization and urbanization in Asian countries, the challenge of rising emerging contaminants in the environment, including the water cycle, has become more pronounced. Consequently, the presence of CECs in drinking water systems is inevitable due to their ubiquitous nature in aquatic environments. This scoping review aims to identify epidemiological concerns regarding drinking water CECs in Asian countries over the past decade by describing the types of assessed CECs, their associated health effects, and identifying gaps and future research prospects through a summary of relevant studies. Searches were conducted on PubMed and Scopus up to February 29, 2024. Included were epidemiological studies from the past 10 years (since January 2014) in Asian countries that assessed emerging contaminants in drinking water through direct measurement or analysis as factors. From an initial pool of 3198 results, 15 relevant studies were selected. These studies assessed various types of CECs, including disinfection byproducts (n = 10), endocrine disruptors (n = 2), pesticides (n = 2), and a protozoan pathogen (n = 1). The meticulous assessment of CECs and associated health outcomes in Asian epidemiological studies over the past decade has been deemed inadequate to address the wide range of ubiquitous CECs in drinking water and their potential health effects that have not yet been addressed. While not the sole objective, the primary aim of epidemiological studies is to inform policy decisions and increase awareness among the public and policymakers. Therefore, researchers in Asian countries, particularly in environmental and public health fields, should prioritize the development of research in this area by exploring more CECs type and associated health outcomes.

In Situ Production of Hydroxyl Radicals via Three-Electron Oxygen Reduction: Opportunities for Water Treatment

The electro-Fenton (EF) process is an advanced oxidation technology with significant potential; however, it is limited by two steps: generation and activation of H2O2. In contrast to the production of H2O2 via the electrochemical two-electron oxygen reduction reaction (ORR), the electrochemical three-electron (3e-) ORR can directly activate molecular oxygen to yield the hydroxyl radical (⋅OH), thus breaking through the conceptual and operational limitations of the traditional EF reaction. Therefore, the 3e- ORR is a vital process for efficiently producing ⋅OH in situ, thus charting a new path toward the development of green water-treatment technologies. This review summarizes the characteristics and mechanisms of the 3e- ORR, focusing on the basic principles and latest progress in the in situ generation and efficient utilization of ⋅OH through the modulation of the reaction pathway, shedding light on the rational design of 3e- ORR catalysts, mechanistic exploration, and practical applications for water treatment. Finally, the future developments and challenges of efficient, stable, and large-scale utilization of ⋅OH are discussed based on achieving optimal 3e- ORR regulation and the potential to combine it with other technologies.

Factors in the decline of the African penguin: Are contaminants of emerging concern (CECs) a potential new age stressor?

The African penguin is currently experiencing a significant decline, with just over 10,000 breeding pairs left. A substantial body of research reflects the impacts of contaminants of emerging concern (CECs) on the marine environment, with wastewater treatment plants reported as one of the main sources of CEC release. In South Africa, CECs were identified contaminating the marine environment and bioaccumulating in several marine species. Approximately 70 % of all African penguin colonies breed in close proximity to cities and/or harbors in South Africa. Currently, the impact of CECs as a stressor upon the viability of African penguin populations is unknown. Based on the search results there was a clear lack of information on CECs' bioaccumulation and impact on the African penguin. This narrative review will thus focus on the prevalent sources and types of CECs and examine the reported consequences of constant exposure in seabirds, particularly African penguins.

Continuous UV-C/H2O2 and UV-C/Chlorine applied to municipal secondary effluent and nanofiltration retentate: Removal of contaminants of emerging concern, ecotoxicity, and reuse potential

As global effects of water scarcity raise concerns and environmental regulations evolve, contemporary wastewater treatment plants (WWTPs) face the challenge of effectively removing a diverse range of contaminants of emerging concern (CECs) from municipal effluents. This study focuses on the assessment of advanced oxidation processes (AOPs), specifically UV-C/H2O2 and UV-C/Chlorine, for the removal of 14 target CECs in municipal secondary effluent (MSE, spiked with 10 μg L-1 of each CEC) or in the subsequent MSE nanofiltration retentate (NFR, no spiking). Phototreatments were carried out in continuous mode operation, with a hydraulic retention time of 3.4 min, using a tube-in-tube membrane photoreactor. For both wastewater matrices, UV-C photolysis (3.3 kJ L-1) exhibited high efficacy in removing CECs susceptible to photolysis, although lower treatment performance was observed for NFR. In MSE, adding 10 mg L-1 of H2O2 or Cl2 enhanced treatment efficiency, with UV-C/H2O2 outperforming UV-C/Chlorine. Both UV-C/AOPs eliminated the chronic toxicity of MSE toward Chlorella vulgaris. In the NFR, not only was the degradation of target CECs diminished, but chronic toxicity to C. vulgaris persisted after both UV-C/AOPs, with UV-C/Chlorine increasing toxicity due to potential toxic by-products. Nanofiltration permeate (NFP) exhibited low CECs and microbial content. A single chlorine addition effectively controlled Escherichia coli regrowth for 3 days, proving NFP potential for safe reuse in crop irrigation (<1 CFU/100 mL for E. coli; <1 mg L-1 for free chlorine). These findings provide valuable insights into the applications and limitations of UV-C/H2O2 and UV-C/Chlorine for distinct wastewater treatment scenarios.

Hazard identification of endocrine-disrupting carcinogens (EDCs) in relation to cancers in humans

Endocrine disrupting chemicals or carcinogens have been known for decades for their endocrine signal disruption. Endocrine disrupting chemicals are a serious concern and they have been included in the top priority toxicants and persistent organic pollutants. Therefore, researchers have been working for a long time to understand their mechanisms of interaction in different human organs. Several reports are available about the carcinogen potential of these chemicals. The presented review is an endeavor to understand the hazard identification associated with endocrine disrupting carcinogens in relation to the human body. The paper discusses the major endocrine disrupting carcinogens and their potency for carcinogenesis. It discusses human exposure, route of entry, carcinogenicity and mechanisms. In addition, the paper discusses the research gaps and bottlenecks associated with the research. Moreover, it discusses the limitations associated with the analytical techniques for detection of endocrine disrupting carcinogens.

Insight into the molecular recognition of human and polar bear pregnane X receptor by three organic pollutants using molecular docking and molecular dynamics simulations

Pregnane X receptor (PXR) is a heterologous biosensor that is involved in the metabolic pathway of environmental pollutants, regulating the transcription of genes involved in biotransformation. There are significant differences in the selectivity and specificity of organic pollutants (OPs) toward polar bear PXR (pbPXR) and human PXR (hPXR), but the detailed dynamical characteristics of their interactions are unclear. Homology Modeling, molecular docking, molecular dynamics simulation, and free energy calculation were used to analyze the recognition of pbPXR and hPXR by three OPs: BPA, chlordane and toxaphene. Comparing interaction patterns along with binding free energy of pbPXR and hPXR with these three OPs revealed that although pbPXR and hPXR interact similar with these three OPs, these OPs have different effects on the internal dynamics of pbPXR and hPXR. This results in significant alterations in the interaction of key residues near Leu209, Met243, Phe288, Met323, and His407 with OPs, thereby influencing their binding energy. Non-polar interactions, especially van der Waals interactions, were found to be the dominating factors in interacting of these OPs with PXRs. The region surrounding these key residues facilitates hydrophobic contacts with PXR, which are crucial for the selective activation of PXRs in different species by these three OPs. These findings are of significant guidance in understanding the impacts of environmental endocrine disruptors on different organisms.

Catalytic degradation of carbamazepine by surface-modified zerovalent copper via the activation of peroxymonosulphate: mechanism, degradation pathways and ecotoxicity

In this research work, surface-modified nano zerovalent copper (nZVC) was prepared using a simple borohydride reduction method. The spectroscopic and crystallographic results revealed the successful synthesis of surface-modified nano zerovalent copper (nZVC) using solvents such as ethanol (ETOH), ethylene glycol (EG) and tween80 (T80). The as-synthesized material was fully characterized for morphological surface and crystal structural properties. The results indicated that EG provides an excellent synthesis environment to nZVC compared to ETOH and T80 in terms of good dispersion, high surface area and excellent catalytic properties. The catalytic efficiency of nZVC/EG was investigated alone and with peroxymonosulphate (PMS) in the absence of light. The degradation results demonstrated that the involvement of PMS synergistically boosted the catalytic efficiency of synthesized nZVC/EG material. Furthermore, the degradation products (DPs) of CBZ were determined by GC-MS and subsequently, the degradation pathways were proposed. The ecotoxicity analysis of the DPs was also explored. The proposed (nZVC/EG/PMS) system is economical and efficient and thus could be applied for the degradation of CBZ from an aquatic system after altering the degradation pathways in such a way that results in harmless products.

Response surface methodology directed modeling of the biosorption of progesterone onto acid activated Moringa oleifera seed biomass: Parameters and mechanisms

In this study, chemically activated fat-free powdered Moringa oleifera seed biomass (MOSB) was synthesized, characterized, and utilized as a cost-effective biosorbent for the abstraction of progesterone (PGT) hormone from synthetic wastewater. Natural PGT is a human steroid hormone from the progestogen family. Synthetic PGT is approved for the regulation of the menstrual cycle, aiding contraception, and is administered as a hormone replacement therapy in menopausal and post-menopausal women. PGT is an endocrine disrupting chemical (EDC) with negative health impacts on biota. The X-ray diffractogram (XRD), Scanning electron microscopy-Energy-dispersive X-ray spectroscopy (SEM-EDS), and Brunauer-Emmet-Teller (BET) analyses displayed a porous, amorphous biosorbent with an elemental composition of 72.5% carbon and 22.5% oxygen and a specific surface area of 210.0 m2 g-1. The process variables including temperature (298-338 K), pH (2-10), contact time (10-180 min), adsorbate concentration (20-500 μg L-1), and adsorbent dosage (0.1-2.0 g) were optimized using response surface methodology (RSM) to obtain the greatest efficacy of MOSB during biosorption of PGT. The optimum parameters for PGT biosorption onto MOSB were: 86.8 min, 500 μg L-1 adsorbate concentration, 298 K, and 0.1 g adsorbent dosage. PGT removal from aqueous solutions was pH-independent. The Langmuir isotherm best fitted the equilibrium data with maximal monolayer biosorption capacity of 135.8 μg g-1. The biosorption rate followed the pseudo-first-order (PFO) kinetic law. The thermodynamic functions (ΔG < 0, ΔH = -9.258 kJ mol-1 and ΔS = +44.16 J mol-1) confirmed that the biosorption of PGT onto MOSB is a spontaneous and exothermic process with increased randomness at the adsorbent surface. The biosorption mechanism was physisorption and was devoid of electrostatic interactions. The findings from this study indicate that MOSB is an inexpensive, low-carbon, and environmentally friendly biosorbent that can effectively scavenge PGT from aqueous solutions.

Glyphosate: Hepatotoxicity, Nephrotoxicity, Hemotoxicity, Carcinogenicity, and Clinical Cases of Endocrine, Reproductive, Cardiovascular, and Pulmonary System Intoxication

Glyphosate (GLP) is an active agent of GLP-based herbicides (GBHs), i.e., broad-spectrum and postemergent weedkillers, commercialized by Monsanto as, e.g., Roundup and RangerPro formulants. The GBH crop spraying, dedicated to genetically engineered GLP-resistant crops, has revolutionized modern agriculture by increasing the production yield. However, abusively administered GBHs' ingredients, e.g., GLP, polyoxyethyleneamine, and heavy metals, have polluted environmental and industrial areas far beyond farmlands, causing global contamination and life-threatening risk, which has led to the recent local bans of GBH use. Moreover, preclinical and clinical reports have demonstrated harmful impacts of GLP and other GBH ingredients on the gut microbiome, gastrointestinal tract, liver, kidney, and endocrine, as well as reproductive, and cardiopulmonary systems, whereas carcinogenicity of these herbicides remains controversial. Occupational exposure to GBH dysregulates the hypothalamic-pituitary-adrenal axis, responsible for steroidogenesis and endocrinal secretion, thus affecting hormonal homeostasis, functions of reproductive organs, and fertility. On the other hand, acute intoxication with GBH, characterized by dehydration, oliguria, paralytic ileus, as well as hypovolemic and cardiogenic shock, pulmonary edema, hyperkalemia, and metabolic acidosis, may occur fatally. As no antidote has been developed for GBH poisoning so far, the detoxification is mainly symptomatic and supportive and requires intensive care based on gastric lavage, extracorporeal blood filtering, and intravenous lipid emulsion infusion. The current review comprehensively discusses the molecular and physiological basics of the GLP- and/or GBH-induced diseases of the endocrine and reproductive systems, and cardiopulmonary-, nephro-, and hepatotoxicities, presented in recent preclinical studies and case reports on the accidental or intentional ingestions with the most popular GBHs. Finally, they briefly describe modern and future healthcare methods and tools for GLP detection, determination, and detoxification. Future electronically powered, decision-making, and user-friendly devices targeting major GLP/GBH's modes of actions, i.e., dysbiosis and the inhibition of AChE, shall enable self-handled or point-of-care professional-assisted evaluation of the harm followed with rapid capturing GBH xenobiotics in the body and precise determining the GBH pathology-associated biomarkers levels.

Ecotoxicological evaluation of surface waters in Northern Namibia

The increasing pressure on freshwater systems due to intensive anthropogenic use is a big challenge in central-northern Namibia and its catchment areas, the Kunene and the Kavango Rivers, and the Cuvelai-Etosha Basin, that provide water for more than 1 million people. So far, there is no comprehensive knowledge about the ecological status and only few knowledge about the water quality. Therefore, it is crucial to learn about the state of the ecosystem and the ecological effects of pollutants to ensure the safe use of these resources. The surface waters of the three systems were sampled, and three bioassays were applied on three trophic levels: algae, daphnia, and zebrafish embryos. Additionally, in vitro assays were performed to analyze mutagenicity (Ames fluctuation), dioxin-like potential (micro-EROD), and estrogenicity (YES) by mechanism-specific effects. The results show that acute toxicity to fish embryos and daphnia has mainly been detected at all sites in the three catchment areas. The systems differ significantly from each other, with the sites in the Iishana system showing the highest acute toxicity. At the cellular level, only weak effects were identified, although these were stronger in the Iishana system than in the two perennial systems. Algae growth was not inhibited, and no cytotoxic effects could be detected in any of the samples. Mutagenic effects and an estrogenic potential were detected at three sites in the Iishana system. These findings are critical in water resource management as the effects can adversely impact the health of aquatic ecosystems and the organisms within them.

Global insight into the occurrence, treatment technologies and ecological risk of emerging contaminants in sanitary sewers: Effects of the SARS-CoV-2 coronavirus pandemic

The SARS-CoV-2 pandemic caused changes in the consumption of prescribed/non-prescribed drugs and the population's habits, influencing the detection and concentration of emerging contaminants (ECs) in sanitary sewage and harming environmental and health risks. Therefore, the present work sought to discuss current literature data on the effects of the "COVID-19 pandemic factor" on the quality of raw sewage produced over a five-year period (2018-2019: pre-pandemic; 2020-2022: during the pandemic) and biological, physical, chemical and hybrid treatment technologies, influencing factors in the removal of ECs and potential ecological risks (RQs). Seven hundred thirty-one publications correlating sewage and COVID-19 were identified: 184 pre-pandemic and 547 during the pandemic. Eight classes and 37 ECs were detected in sewage between 2018 and 2022, with the "COVID-19 pandemic factor" promoting an increase in estrogens (+31,775 %), antibiotics (+19,544 %), antiepileptics and antipsychotics (+722 %), pesticides (+200 %), analgesics, anti-inflammatories and anticoagulants (+173 %), and stimulant medications (+157 %) in sanitary sewage. Among the treatment systems, aerated reactors integrated into biomembranes removed >90 % of cephalexin, clarithromycin, ibuprofen, estrone, and 17β-estradiol. The absorption, adsorption, and biodegradation mechanisms of planted wetland systems contributed to better cost-benefit in reducing the polluting load of sewage ECs in the COVID-19 pandemic, individually or integrated into the WWTP. The COVID-19 pandemic factor increased the potential ecological risks (RQs) for aquatic organisms by 40 %, with emphasis on clarithromycin and sulfamethoxazole, which changed from negligible risk and low risk to (very) high risk and caffeine with RQ > 2500. Therefore, it is possible to suggest that the COVID-19 pandemic intensified physiological, metabolic, and physical changes to different organisms in aquatic biota by ECs during 2020 and 2022.

Promoting the circular economy: Valorization of a residue from industrial char to activated carbon with potential environmental applications as adsorbents

Pyrolysis of residues enriched with carbon, such as in agroforestry or industrial activities, has been postulated as an emerging technology to promote the production of biofuels, contributing to the circular economy and minimizing waste. However, during the pyrolysis processes a solid fraction residue is generated. This work aims to study the viability of these chars to develop porous carbonaceous materials that can be used for environmental applications. Diverse chars discharged by an industrial pyrolysis factory have been activated with KOH. Concretely, the char residues came from the pyrolysis of olive stone, pine, and acacia splinters, spent residues fuel, and cellulose artificial casings. The changes in the textural, structural, and composition characteristics after the activation process were studied by N2 adsorption-desorption isotherms, scanning electron microscopy, FTIR, elemental analysis, and XPS. A great porosity was developed, SBET within 776-1186 m2 g-1 and pore volume of 0.37-0.59 cm3 g-1 with 70-90% of micropores contribution. The activated chars were used for the adsorption of CO2, leading to CO2 maximum uptakes of 90-130 mg g-1. There was a good correlation between the CO2 uptake with microporosity and oxygenated surface groups of the activated chars. Moreover, their ability to adsorption of contaminants in aqueous solution was also evaluated. Concretely, there was studied the adsorption of aqueous heavy metals, i.e., Cd, Cu, Ni, Pb, and Zn, and organic pollutants of emerging concern such as caffeine, diclofenac, and acetaminophen.

Bioprospecting photosynthetic microorganisms for the removal of endocrine disruptor compounds

Endocrine disruption compounds can be found in various daily products, like pesticides, along with cosmetic and pharmaceutical commodities. Moreover, occurrence of EDCs in the wastewater alarms the urgency for their removal before discharge owing to the harmful effect for the environment and human health. Compared to implementation of physical and chemical strategies, cultivation of photosynthetic microorganisms has been acknowledged for their high efficiency and eco-friendly process in EDCs removal along with accumulation of valuable byproducts. During the process, photosynthetic microorganisms remove EDCs via photodegradation, bio-adsorption, -accumulation, and -degradation. Regarding their high tolerance in extreme environment, photosynthetic microorganisms have high feasibility for implementation in wastewater treatment plant. However, several considerations are critical for their scaling up process. This review discussed the potency of EDCs removal by photosynthetic microorganisms and focused on the efficiency, mechanism, challenge, along with the prospect. Details on the mechanism's pathway, accumulation of valuable byproducts, and recent progress in scaling up and application in real wastewater were also projected in this review.

Occurrence and environmental risks of contaminants of emerging concern across the River Athi Basin, Kenya, in dry and wet seasons

Globally, the environmental occurrence of Contaminants of Emerging Concern (CECs) including pharmaceuticals (PhACs), personal care products (PCPs) and modern polar pesticides has raised ecological and human health awareness. However, as the developed world races against time to establish regulatory measures to mitigate their effects, developing nations including Kenya are lagging behind, partly due to unavailability of adequate data. In this work, a multi-residue analysis of 86 CECs was carried out on 198 surface water and 18 effluent samples collected at 24 sites across the River Athi basin area, Kenya, in both dry and rainy seasons. Overall, 57 CECs comprising 31 PhACs (0.4 ng L-1-142 μg L-1), 6 PCPs (0.7-570 ng L-1) and 20 pesticides (0.3 ng L-1-8.3 μg L-1) were detected. The maximum loads varied from 217 g day-1 (PCPs) to 46 kg day-1 (PhACs). Individually, carbamazepine, nevirapine, sulfamethoxazole and DEET were the most ubiquitous CECs, with detection frequencies (DF) higher than 80 %. The highest concentrations were observed at river sites that are heavily impacted by informal settlements, highlighting the critical role of slums in urban rivers pollution. At least 8 CECs including acetamiprid, alachlor, atrazine, diuron, nevirapine and paracetamol show potential risk to algae, Daphnia magna and fish, as exemplified by Risk Quotients (RQ) up to 174. Similarly, potential risk of antibiotic resistant bacteria development is evident (RQ up to 64), being driven by metronidazole, sulfamethoxazole and trimethoprim. Ultimately, further studies on the occurrence and distribution of antibiotic resistant bacteria within the basin and among the communities consuming untreated river water for drinking is merited.

Next-generation hybrid technologies for the treatment of pharmaceutical industry effluents

Water and industries are intangible units of the globe that are always set to meet the population's demand. The global population depends on one-third of freshwater increasing the demand. The increase in population along with urbanization has polluted the fresh water resources. The pharmaceutical industry is marked as an emerging contaminant of water pollution. The most common type of pharmaceutical drugs that are detected in the environment includes antibiotics, analgesics, NSAIDs, and pain-relieving drugs. These drugs alter the food chain of the organisms causing chaos mainly in the marine ecosystem. Pharmaceutical drugs are found only in shallow amounts (ng/mg) they have a huge impact on the living system. The consumption of water contaminated with pharmaceutical ingredients can disrupt reproduction, hormonal imbalance, cancer, and respiratory problems. Various methods are used to remove these chemicals from the environment. In this review, we mainly focused on the emerging hybrid technologies and their significance in the effective treatment of pharmaceutical wastewater. This review paper primarily elaborates on the merits and demerits of existing conventional technologies helpful in developing integrated technologies for the modern era of pharmaceutical effluent treatment. This review paper further in detail discusses the various strategies of eco-friendly bioremediation techniques namely biostimulation, bioaugmentation, bacterial degradation, mycoremediation, phytoremediation, and others for the ultimate removal of pharmaceutical contaminants in wastewater. The review makes clear that targeted and hybrid solutions are what the world will require in the future to get rid of these pharmacological prints.

Deep eutectic solvents with solid supports used in microextraction processes applied for endocrine-disrupting chemicals

The determination of endocrine-disrupting chemicals (EDCs) has become one of the biggest challenges in Analytical Chemistry. Due to the low concentration of these compounds in different kinds of samples, it becomes necessary to employ efficient sample preparation methods and sensitive measurement techniques to achieve low limits of detection. This issue becomes even more struggling when the principles of the Green Analytical Chemistry are added to the equation, since finding an efficient sample preparation method with low damaging properties for health and environment may become laborious. Recently, deep eutectic solvents (DESs) have been proposed as the most promising green kind of solvents, but also with excellent analytical properties due to the possibility of custom preparation with different components to modify their polarity, viscosity or aromaticity among others. However, conventional extraction techniques using DESs as extraction solvents may not be enough to overcome challenges in analysing trace levels of EDCs. In this sense, combination of DESs with solid supports could be seen as a potential solution to this issue allowing, in different ways, to determine lower concentrations of EDCs. In that aim, the main purpose of this review is the study of the different strategies with solid supports used along with DESs to perform the determination of EDCs, comparing their advantages and drawbacks against conventional DES-based extraction methods.

β-cyclodextrin polymer composites for the removal of pharmaceutical substances, endocrine disruptor chemicals, and dyes from aqueous solution- A review of recent trends

Cyclodextrin (CD) and its derivatives are receiving attention as a new-generation adsorbent for water pollution treatment due to their external hydrophilic and internal hydrophobic properties. Among types of CD, β-Cyclodextrin (βCD) has been a material of choice with a proven track record for a range of utilities in distinct domains, owing to its unique cage-like structural conformations and inclusion complex-forming ability, especially to mitigate emerging contaminants (ECs). This article outlines βCD composites in developing approaches of their melds and composites for purposes such as membranes for removal of the ECs in aqueous setups have been explored with emphasis on recent trends. Electrospinning has bestowed an entirely different viewpoint on polymeric materials, comprising βCD, in the framework of diverse functions across a multitude of niches. Besides, this article especially discusses βCD polymer composite membrane-based removal of contaminants such as pharmaceutical substances, endocrine disruptors chemicals, and dyes. Finally, in this article, the challenges and future directions of βCD-based adsorbents are discussed, which may shed light on pragmatic commercial applications of βCD polymer composite membranes.

Recent progress in mineralization of emerging contaminants by advanced oxidation process: A review

Emerging contaminants are chemicals generated due to the usage of pesticide, endocrine disrupting compounds, pharmaceuticals, and personal care products and are liberated into the environment in trace quantities. The emerging contaminants eventually become a greater menace to living beings owing to their wide range and inhibitory action. To diminish these emerging contaminants from the environment, an Advanced Oxidation Process was considered as an efficient option. The Advanced Oxidation Process is an efficient method for mineralizing fractional or generous contaminants due to the generation of reactive species. The primary aim of this review paper is to provide a thorough knowledge on different Advanced Oxidation Process methods and to assess their mineralization efficacy of emerging contaminants. This study indicates the need for an integrated process for enhancing the treatment efficiency and overcoming the drawbacks of the individual Advanced Oxidation Process. Further, its application concerning technical and economic aspects is reviewed. Until now, most of the studies have been based on lab or pilot scale and do not represent the actual scenario of the emerging contaminant mineralization. Thus, the scaling up of the process was discussed, and the major challenges in large scale implementation were pointed out.

A bibliometric analysis of emerging contaminants (ECs) (2001-2021): Evolution of hotspots and research trends

Emerging contaminants (ECs) have attracted increasing attention in the past two decades because of their ubiquitous existence and high environmental risk. Understanding the progress of research and the evolution of hot topics is critical. This study provides a bibliometric review, along with a quantitative trend analysis of approximately 8000 publication records dated from 2001 to 2021. Wider distribution in various subjects was discovered in terms of publication numbers, indicating a strong tendency for EC research to become an interdisciplinary topic. Visualization of term co-occurrence analysis revealed that the ECs study went through three stages over time: identification and detection, traceability and risk, and process and control. Quantitative trend analysis revealed that antibiotics, microplastics, endocrine disrupting chemicals (EDCs), per/poly-fluoroalkyl substances (PFAS), pesticides, heavy metals, and nanoparticles are attracting increasing attention, whereas conventional pharmaceuticals, persistent organic pollutants, and materials such as benzotriazole, diclofenac, bisphenol A, carbamazepine, triclosan, and titanium dioxide exhibit a downward trend. PFAS and EDCs are considered potential future core hotspots for the hysteretic rise in research attention compared with conventional ECs. Furthermore, analysis of research linkage and the developing stages of ECs could be possible approach to determine the evolution of hotspots in ECs study. This study provides objective and comprehensive insights into the research landscape of ECs, which may shed light on future developmental directions for researchers interested in this field.

Recent developments on advanced oxidation processes for degradation of pollutants from wastewater with focus on antibiotics and organic dyes

The existence of various pollutants in water environment contributes to global pollution and poses significant threats to humans, wildlife, and other living beings. The emergence of an effective, realistic, cost-effective, and environmentally acceptable technique to treat wastewater generated from different sectors is critical for reducing pollutant accumulation in the environment. The electrochemical advanced oxidation method is a productive technology for treating hazardous effluents because of its potential benefits such as lack of secondary pollutant and high oxidation efficiency. Recent researches on advanced oxidation processes (AOPs) in the period of 2018-2022 are highlighted in this paper. This review emphasizes on recent advances in electro-oxidation (EO), ozone oxidation, sonolysis, radiation, electro-Fenton (EF), photolysis and photocatalysis targeted at treating pharmaceuticals, dyes and pesticides polluted effluents. In the first half of the review, the concept of the AOPs are discussed briefly. Later, the influence of increasing current density, pH, electrode, electrolyte and initial concentration of effluents on degradation are discussed. Lastly, previously reported designs of electrochemical reactors, as well as data on intermediates generated and energy consumption during the electro oxidation and Fenton processes are discussed. According to the literature study, the electro-oxidation technique is more appropriate for organic compounds, whilst the electro-Fenton technique appear to be more appropriate for more complex molecules.

Functionalization strategies of metal-organic frameworks for biomedical applications and treatment of emerging pollutants: A review

One of the representative coordination polymers, metal-organic frameworks (MOFs) material, is of hotspot interest in the multi field thanks to their unique structural characteristics and properties. As a novel hierarchical structural class, MOFs show diverse topologies, intrinsic behaviors, flexibility, etc. However, bare MOFs have less desirable biofunction, high humid sensitivity and instability in water, restraining their efficiencies in biomedical and environmental applications. Thus, a structural modification is required to address such drawbacks. Herein, we pinpoint new strategies in the synthesis and functionalization of MOFs to meet demanding requirements in in vitro tests, i.e., antibacterial face masks against corona virus infection and in wound healing and nanocarriers for drug delivery in anticancer. Regarding the treatment of wastewater containing emerging pollutants such as POPs, PFAS, and PPCPs, functionalized MOFs showed excellent performance with high efficiency and selectivity. Challenges in toxicity, vast database of clinical trials for biomedical tests and production cost can be still presented. MOFs-based composites can be, however, a bright candidate for reasonable replacement of traditional nanomaterials in biomedical and wastewater treatment applications.

Piezoelectric polarization coupled with photoinduced catalytic oxidation technology for environmental pollution control: Recent advances and future prospects

Energy scarcity and environmental pollution concerns have become substantial impediments to sustainable global economic development. The advent of semiconductor photocatalysis technology provides a potential possibility for effectively alleviating excessive energy consumption and maintaining the long-term stability of the aqueous ecosystem. However, the inefficient transmission efficiency of charge carriers and the high recombination rate of photogenerated electron-hole pairs will culminate in the mediocre catalytic performance observed in conventional semiconductor materials. Fortunately, the piezo-photocatalysis ingeniously integrates the piezoelectric properties of piezoelectric crystals with the optoelectronic properties of semiconductors, thus building a theoretical system of photo-electric-chemical three-phase coupled catalysis. Currently, the photo-mechanical energy synergistic catalytic oxidation degradation process, as a cutting-edge technology based on clean renewable energy, has been perceived as a promising environmental remediation strategy. Herein, a critical review of the application of piezo-photocatalysis in environmental pollution control was delivered. We undertook a comprehensive analysis to elucidate the underlying enhancement mechanism of the piezoelectric effect on photocatalysis in terms of charge migration dynamics and pertinent energy band bending phenomena. In addition, we meticulously summarized diverse innovative methods for introducing vibration energy in piezo-photocatalytic degradation systems (ultrasound, fluid mechanical energy, airflow, self-assembled reactors, etc.). Then, state-of-the-art research advances in the field of environmental pollution control and the corresponding environmental decontamination mechanisms were elaborated based on various integration modes of catalysts (single component, noble metal deposition, heterojunction, coupled substrate materials, etc.). Eventually, an in-depth assessment of current limitations and development trends of piezo-photocatalytic degradation technology has been proposed, along with proactive strategies aimed at surmounting the existing challenges.

Electrochemically enhanced iron oxide-modified carbon cathode toward improved heterogeneous electro-Fenton reaction for the degradation of norfloxacin

In this work, different iron-based cathode materials were prepared using two different approaches: a novel one-step approach, which involved the incorporation of iron oxide with Printex® L6 carbon/PTFE (PL6C/PTFE) on bare carbon felt (CF) and a two-step approach, where iron oxide is deposited onto CF previously modified with PL6C/PTFE. The results obtained from the physical characterization indicated that the presence of iron oxide homogeneously dispersed on the felt fibers with the CF 3-D network kept intact in the one-step approach; whereas the formation of iron oxide aggregates between the felt fibers for material obtained using the two-step approach. Among the iron oxide-based cathodes investigated, the iron-incorporated electrode exhibited the greatest efficiency in terms of the removal and mineralization of norfloxacin (NOR) under neutral pH (complete NOR removal in less than 30 min with around 50% mineralization after 90 min). The findings of this study show that the low cost and simple-to-prepare iron-modified carbon-based materials in HEF process led to the enhanced degradation of organic contaminants in aqueous solutions.

The evolution of endocrine disruptor chemical assessments worldwide in the last three decades

Endocrine Disrupting Chemicals (EDCs) encompass a wide variety of substances capable of interfering with the endocrine system, including but not limited to bisphenol A, organochlorines, polybrominated flame retardants, alkylphenols and phthalates. These compounds are widely produced and used in everyday modern life and have increasingly been detected in aquatic matrices worldwide. In this context, this study aimed to carry out a literature review to assess the evolution of EDCs detected in different matrices in the last thirty years. A bibliometric analysis was conducted at the Scopus, Web of Science, and Google Scholar databases. Data were evaluated using the Vosviewer 1.6.17 software. A total of 3951 articles in English were retrieved following filtering. The results demonstrate a gradual and significant growth in the number of published documents, strongly associated with the increasing knowledge on the real environmental impacts of these compounds. Studied were mostly conducted by developed countries in the first two decades, 1993 to 2012, but in the last decade (2013 to 2022), an exponential leap in the number of publications by countries such as China and an advance in research by developing countries, such as Brazil, was verified.

Combining computational tools and experimental studies towards endocrine disruptors mitigation: A review of biocatalytic and adsorptive processes

The endocrine disruptors (EDCs) are an important group of emerging contaminants, and their mitigation has been a huge challenge due to their chemistry complexity and variety of these compounds. The traditional treatments are inefficient to completely remove EDCs, and adsorptive processes are the major alternative investigated on their removal. Also, the use of EDCs degrading enzymes has been encouraged due to ecofriendly approach of biocatalytic processes. This paper highlights the occurrence, classification, and toxicity of EDCs with special focus in the use of enzyme-based and adsorptive technologies in the elimination of EDCs from ambiental matrices. Numerous prior reviews have focused on the discussions toward these technologies. However, the literature lacks theoretical discussions about important aspects of these methods such as the mechanisms of EDCs adsorption on the adsorbent surface or the interactions between degrading enzymes - EDCs. In this sense, theoretical calculations combined to experimental studies may help in the development of more efficient technologies to EDCs mitigation. In this review, we point out how computational tools such as molecular docking and molecular dynamics have to contribute to the design of new adsorbents and efficient catalytic processes towards endocrine disruptors mitigation.

Water, Water Everywhere, but Every Drop Unique: Challenges in the Science to Understand the Role of Contaminants of Emerging Concern in the Management of Drinking Water Supplies

The protection and management of water resources continues to be challenged by multiple and ongoing factors such as shifts in demographic, social, economic, and public health requirements. Physical limitations placed on access to potable supplies include natural and human-caused factors such as aquifer depletion, aging infrastructure, saltwater intrusion, floods, and drought. These factors, although varying in magnitude, spatial extent, and timing, can exacerbate the potential for contaminants of concern (CECs) to be present in sources of drinking water, infrastructure, premise plumbing and associated tap water. This monograph examines how current and emerging scientific efforts and technologies increase our understanding of the range of CECs and drinking water issues facing current and future populations. It is not intended to be read in one sitting, but is instead a starting point for scientists wanting to learn more about the issues surrounding CECs. This text discusses the topical evolution CECs over time (Section 1), improvements in measuring chemical and microbial CECs, through both analysis of concentration and toxicity (Section 2) and modeling CEC exposure and fate (Section 3), forms of treatment effective at removing chemical and microbial CECs (Section 4), and potential for human health impacts from exposure to CECs (Section 5). The paper concludes with how changes to water quantity, both scarcity and surpluses, could affect water quality (Section 6). Taken together, these sections document the past 25 years of CEC research and the regulatory response to these contaminants, the current work to identify and monitor CECs and mitigate exposure, and the challenges facing the future.

Endocrine disrupting chemicals in wastewater treatment plants in Kenya, East Africa: Concentrations, removal efficiency, mass loading rates and ecological impacts

This study investigated the levels, mass loadings, removal efficiency, and associated ecotoxicological risks of selected endocrine disrupting chemicals (EDCs), namely, dibutylphthalate (DBP), diethylhexylphthalate (DEHP), dimethylphthalate (DMP), linuron (LNR) and progesterone (PGT) in wastewater, sludge, and untreated dry biosolid (UDBS) samples from twelve wastewater treatment plants (WWTPs) in nine major towns in Kenya. Analysis was done using high-performance liquid chromatography coupled with triple quadrupole mass spectrometry (LC-MS/MS). All the wastewater influents had quantifiable levels of EDCs with DBP being the most abundant (37.49%) with a range of 4.33 ± 0.63 to 19.68 ± 1.24 μg L-1. DEHP was the most abundant in sludge and accounted for 48.2% ranging between 278.67 and 9243.49 ng g-1 dry weight (dw). In the UDBS samples, DEHP was also the most abundant (40%) of the total EDCs detected with levels ranging from 78.77 to 3938.54 ng g-1 dw. The average removal efficiency per pollutant was as follows: DMP (98.7%) > DEHP (91.7%) > PGT (83.4%) > DBP (77.9%) > LNR (72.2%) which can be attributed to sorption onto the biosolid, biological degradation, photolysis, and phytoremediation. The pH was negatively correlated to the EDC concentrations while total dissolved solids (TDS), chemical oxygen demand (COD), biochemical oxygen demand (BOD5), and electrical conductivity (EC) were positively correlated. The mass loadings were as high as 373.33 g day-1 of DBP in the treatment plants located in densely populated cities. DEHP and PGT had their Risk Quotients (RQs) > 1, posing a high risk to biota. DMP, DBP, and LNR posed medium risks as their RQ values were between 0.1 and 1. EDCs are therefore loaded to environmental compartments through either the effluent that loads these pollutants into the receiving aquatic ecosystem or through the UDBS, which are used as fertilizers in agricultural farmlands causing potential toxicological risks to aquatic and terrestrial life.

A critical review on quantitative evaluation of aqueous toxicity in water quality assessment

Conventional chemical techniques have inherent limitations in detecting unknown chemical substances in water. As a result, effect-based methods have emerged as a viable alternative to overcome these limitations. These methods provide more accurate and intuitive evaluations of the toxic effects of water. While numerous studies have been conducted, only a few have been applied to national water quality monitoring. Therefore, it is crucial to develop toxicity evaluation methods and establish thresholds based on quantifying toxicity. This article provides an overview of the development and application of bioanalytical tools, including in vitro and in vivo bioassays. The available methods for quantifying toxicity are then summarized. These methods include aquatic life criteria for assessing the toxicity of a single compound, comprehensive wastewater toxicity testing for all contaminants in a water sample (toxicity units, whole effluent toxicity, the potential ecotoxic effects probe, the potential toxicology method, and the lowest ineffective dilution), methods based on mechanisms and relative toxicity ratios for substances with the same mode of action (the toxicity equivalency factors, toxic equivalents, bioanalytical equivalents), and effect-based trigger values for micropollutants. The article also highlights the advantages and disadvantages of each method. Finally, it proposes potential areas for applying toxicity quantification methods and offers insights into future research directions. This review emphasizes the significance of enhancing the evaluation methods for assessing aqueous toxicity in water quality assessment.

Prevalence of Endocrine Disrupting Chemicals in the urban wastewater treatment systems of Dehradun, India: Daunting presence of Estrone

We quantified the occurrences and seasonal variations of the target endocrine disrupting chemicals (EDCs) at four (two major municipals, and two academic institutions) WWTPs in Dehradun city, Uttarakhand, India. The results showed estrone in higher concentrations at μgL-1 levels in influent among the WWTPs, compared to triclosan (TCS) at ngL-1 levels. An astounding concentration of 123.95 μgL-1 was recorded for the estrone in the influent, which is to date the highest ever recorded, globally. Statistical data treatment was performed to test the distribution of the data (Shapiro-Wilk, Anderson-Darling, Lilliefors, and Jarque-Bera tests), and the significant difference between the mean of the wastewater sample population (ANOVA: F statistics, p values, Mann-Whitney test, Tukey's and Dunn's post hoc analysis). Statistical data treatment indicated EDCs concentration with a bi-modal distribution. The Shapiro-Wilk, Anderson-Darling, Lilliefors, and Jarque-Bera tests elucidate a non-normal distribution for the EDCs sample data. A statistically significant difference (F = 8.46; p < 0.0001) in the seasonal data for the abundance of the target EDCs at the WWTPs have been observed. Highest and significantly different mean EDCs concentrations were recorded during the monsoon, compared to the spring (p = 0.025) and summer (p = 0.0004) seasons in the influent waters. The mean influent concentrations of TCS and estrone in monsoon were 66.45 ngL-1 and 78.02 μgL-1, respectively. Maximum removals were recorded for TCS, while maximum negative removal of ∼293% was observed for estrone in the WWTPs. Particularly, the high levels of estrone in the wastewater pose a significant threat as estrone presence could be led to feminization, dysregulation of reproduction in organisms, and carcinogenesis processes in the environment. This study critically highlights the limitation of the WWTPs in the treatment, degradation, and assimilation of EDCs leading to their hyperaccumulation at WWTP effluents, thereby posing a substantial threat to nearby aquatic ecosystems, human health, and the ecological balance of the region.

Cellulose-based adsorbents for solid phase extraction and recovery of pharmaceutical residues from water

Cellulose has attracted interest from researchers both in academic and industrial sectors due to its unique structural and physicochemical properties. The ease of surface modification of cellulose by the integration of nanomaterials, magnetic components, metal organic frameworks and polymers has made them a promising adsorbent for solid phase extraction of emerging contaminants, including pharmaceutical residues. This review summarizes, compares, and contrasts different types of cellulose-based adsorbents along with their applications in adsorption, extraction and pre-concentration of pharmaceutical residues in water for subsequent analysis. In addition, a comparison in efficiency of cellulose-based adsorbents and other types of adsorbents that have been used for the extraction of pharmaceuticals in water is presented. From our observation, cellulose-based materials have principally been investigated for the adsorption of pharmaceuticals in water. However, this review aims to shift the focus of researchers to the application of these adsorbents in the effective pre-concentration of pharmaceutical pollutants from water at trace concentrations, for quantification. At the end of the review, the challenges and future perspectives regarding cellulose-based adsorbents are discussed, thus providing an in-depth overview of the current state of the art in cellulose hybrid adsorbents for extraction of pharmaceuticals from water. This is expected to inspire the development of solid phase exraction materials that are efficient, relatively cheap, and prepared in a sustainable way.

Enzyme-immobilized hierarchically porous covalent organic framework biocomposite for catalytic degradation of broad-range emerging pollutants in water

Efficient enzyme immobilization is crucial for the successful commercialization of large-scale enzymatic water treatment. However, issues such as lack of high enzyme loading coupled with enzyme leaching present challenges for the widespread adoption of immobilized enzyme systems. The present study describes the development and bioremediation application of an enzyme biocomposite employing a cationic macrocycle-based covalent organic framework (COF) with hierarchical porosity for the immobilization of horseradish peroxidase (HRP). The intrinsic hierarchical porous features of the azacalix[4]arene-based COF (ACA-COF) allowed for a maximum HRP loading capacity of 0.76 mg/mg COF with low enzyme leaching (<5.0 %). The biocomposite, HRP@ACA-COF, exhibited exceptional thermal stability (∼200 % higher relative activity than the free enzyme), and maintained ∼60 % enzyme activity after five cycles. LCMSMS analyses confirmed that the HRP@ACA-COF system was able to achieve > 99 % degradation of seven diverse types of emerging pollutants (2-mercaptobenzothiazole, paracetamol, caffeic acid, methylparaben, furosemide, sulfamethoxazole, and salicylic acid)in under an hour. The described enzyme-COF system offers promise for efficient wastewater bioremediation applications.

Socioeconomic and seasonal effects on spatiotemporal trends in estrogen occurrence and ecological risk within a river across low-urbanized and high-husbandry landscapes

Estrogen pollution is a persistent issue in rivers. This study investigated the occurrence, spatiotemporal variation mechanisms, sources, and ecological risks of estrone (E1), 17β-estradiol (E2), estriol (E3), 17α-ethinylestradiol (EE2), diethylstilbestrol (DES), and bisphenol-A (BPA) in the waters of the Zijiang River, a tributary of the middle Yangtze River. The results revealed elevated detection frequencies and estrogen concentrations in the dry season compared to the wet season, mainly due to the precipitation dilution effect. Total estrogen concentration ranged from 21.2 to 97.5 ng/L in the dry season, which was significantly correlated to spatial distributions of animal husbandry and population. Among the estrogens studied in the river, E2, BPA, and EE2 were predominant. The collective sources of E1, E2, E3, and EE2 were traced back to human and husbandry excrement, whereas BPA emitted from daily life products, contributing to 55.5% and 42.7% of the total estrogen concentration, respectively. Particularly, the average and median E1, E2, and EE2 concentrations in the river exceeded the environmental quality standards of the European Union. The total estrogenic activity dominated by EE2 exceeded the 1 ng E2/L threshold, with levels exceeding 10 ng E2/L during the dry season. The risk quotients exhibited a high ecological risk of E1 and EE2 to fish and a moderate to high ecological risk of E1 to crustaceans, EE2 to mollusks, and E2 to fish. Therefore, E1, E2, and EE2 pollution of the river may lead to both high estrogenic potency and moderate or high ecological risk; thus, they should be considered priority pollutants in the river. These results yield valuable insights into the spatiotemporal change mechanisms, sources, and ecological risks of estrogens in river water of low-urbanization and rural watersheds.

Lymnaea stagnalis and Ophryotrocha diadema as Model Organisms for Studying Genotoxicological and Physiological Effects of Benzophenone-3

Benzophenone-3 (BP-3) is a lipophilic organic compound that occurs naturally in flower pigments. Since it adsorbs ultraviolet (UV) radiation in the UVA and UVB regions, it is one of the most common UV filters found in sunscreen and cosmetic products. We explored by in vivo micronuclei (MNi) assay the genotoxic effects of BP-3 on hemocytes from the freshwater gastropod Lymnaea stagnalis. We also studied its possible toxic effects on life-history traits: body growth in L. stagnalis and egg production of both L. stagnalis and the marine polychaete worm Ophryotrocha diadema. Adult individuals were exposed to increasing concentrations of BP-3 (0.025, 0.050, 0.100, and 0.200 mg/L) once a week for 4 weeks. In L. stagnalis, exposure to BP-3 at concentrations of both 0.2 and 0.1 mg/L produced genotoxic effects on the micronuclei frequencies, but only concentrations of 0.2 mg/L affected the NBUDs frequencies. Similarly, negative effects on body growth were observed at the concentrations of 0.2 and 0.1 mg/L and a significant reduction of egg production at 0.2 mg/L. In O. diadema, a negative correlation between egg production and increasing BP-3 concentrations was observed. Our findings suggest the need for more stringent measures to reduce the presence of BP-3 in the environment.