Hydrophilic magnetic molecularly imprinted resin in PVDF membrane for efficient selective removal of dye

Synthesis of UiO-66-NH2@PSF Hollow Fiber Membrane with Enhanced Simultaneous Adsorption of Pb2+ and Phosphate for Hydrogen Peroxide Purification

Electronic grade hydrogen peroxide plays a crucial role in the fabrication of large-scale integrated circuits. However, hydrogen peroxide prepared by the anthraquinone method contains impurities such as lead ions (Pb2+) and phosphate, which can seriously affect the yield of the circuit. Traditional adsorbent materials have difficulty in solving the problem of simultaneous adsorption of trace anions and cations in hydrogen peroxide due to the single adsorption site and poor adsorption kinetics. In this study, UiO-66-NH2 was prepared by introducing a -NH2 group on the terephthalic acid ligand, and a series of hybrid matrix hollow fiber membranes with different UiO-66-NH2 contents were prepared by loading it on polysulfone (PSF). This initiative not only improved the pore size and water flux of hollow fiber membranes but also enhanced the removal efficiency of ions from hydrogen peroxide solution, thereby facilitating practical application. Among them, UiO-66-NH2@PSF-1.5 showed the best adsorption of phosphate and lead ions with adsorption capacities of 3.099 and 2.160 mg g-1 and reached the removal efficiency of 67.1 and 60.1%, which fully confirms the practicability in the purification of electronic chemicals. This work innovatively proposes that UiO-66-NH2@PSF hybrid matrix hollow fiber membranes have great potential as simultaneous adsorbents for cations and anions in the efficient purification of electronic grade solvents.

Constructing molecularly imprinted membranes with instant noodles-like structure for selectively separating acteoside

Acteoside (ACT) was the main bioactive components in phenylethanoid glycosides of Cistanche tubulosa. Currently, the development of an efficient method for selectively separating ACT was crucial. Consequently, yolk-shell magnetic mesoporous carbon (YSMMC) was synthesized as a nanofiller to prepare molecularly imprinted membranes (ACT-MIMs) with instant noodles-like structure for selectively separating ACT. The numerous YSMMC were moved to the upper surface of ACT-MIMs by magnetic guidance and constructed the instant noodles-like structure in ACT-MIMs. The instant noodle-like structure increased the surface roughness of ACT-MIMs, which was conducive to improving the effective imprinted interface, increasing the selectivity of ACT-MIMs. In addition, the instant noodle-like structure had dendritic interleaved pathways in ACT-MIMs. The dendritic interleaved pathways can intercept ACT through ACT-MIMs, enhancing the permselectivity of ACT-MIMs. The prepared YSMMC possessed the dendritic shell and interlayer cavity structure can provide a great accommodation space, improving the rebinding capacities of ACT-MIMs. The high permselectivity (14.49), remarkable selectivity (7.52), and excellent rebinding capacity (120.48 mg/g) were achieved for the prepared ACT-MIMs. Thus, the design of ACT-MIMs with the instant noodles-like structure were valuable for selectively separating of bioactive components.

Constructing mesoporous biochar derived from waste carton: Improving multi-site adsorption of dye wastewater and investigating mechanism

The development of cost-efficient biochar adsorbent with a simple preparation method is essential to constructing efficient wastewater treatment system. Here, a low-cost waste carton biochar (WCB) prepared by a simple two-step carbonization was applied in efficiently removing Rhodamine B (RhB) in aqueous environment. The maximum ability of WCB for RhB adsorption was 222 mg/g, 6 and 10 times higher than both of rice straw biochar (RSB) and broadbean shell biochar (BSB), respectively. It was mainly ascribed to the mesopore structure (3.0-20.4 nm) of WCB possessing more spatial sites compared to RSB (2.2 nm) and BSB (2.4 nm) for RhB (1.4 nm✕1.1 nm✕0.6 nm) adsorption. Furthermore, external mass transfer (EMT) controlled mass transfer resistance (MTR) of the RhB sorption process by WCB which was fitted with the Langmuir model well. Meanwhile, the adsorption process was dominated by physisorption through van der Waals forces and π-π interactions. A mixture of three dyes in river water was well removed by using WCB. This work provides a straightforward method of preparing mesoporous biochar derived from waste carton with high-adsorption capacity for dye wastewater treatment.

Bifunctional quaternary magnetic composite as efficient heterojunctions photocatalyst for simultaneous photocatalytic visible light degradation of dye and herbicide pollutants from water and bacterial disinfection

In the present study, the magnetic Fe3O4/Ag2C2O4/Ag3PO4/Ag nanocomposite were prepared through a simple co-precipitation method by using calendula officinalis seed extract as a stabilizer. The fabricated quaternary photocatalyst was applied for to degrade food dye Brilliant Blue FCF (BB) and herbicide Paraquat (PQ) as contaminants at binary mixture in a batch and continuous flow-loop photoreactor under visible light irradiation and also the antibacterial properties was investigated. The fabricated nanocomposite was determined by XRD, FESEM, EDX, BET&BJH, UV-DRS, FT-IR and VSM methods to gain insight about structure, morphology, purity, surface area, optical, functional group and magnetic properties. The photoelectrochemical experiments, PL and DRS indicate the successful coupling of the active semiconductors. The degradation efficiency of BB and PQ was announced to be 88.9% and 92.72% under optimal conditions with a high reaction rate constant value (0.03 and 0.0326 min-1), respectively. The quaternary photocatalyst exhibited superior photocatalytic performance compared with Ag3PO4/Ag2C2O4 and Ag2C2O4. Various scavengers were used to explore the mechanism of photocatalytic performance and supports that [Formula: see text] and OH. is main active species in the degradation process of BB and PQ, respectively. Furthermore, the Fe3O4/Ag2C2O4/Ag3PO4/Ag also demonstrated bactericidal activity against Staphylococcus aureus (S. aureus) as gram-positive bacteria and Escherichia coli (E. coli) as gram-negative bacteria.

Modified poly(vinylidene fluoride) nanomembranes for dye removal from water - A review

Water contamination due to soluble synthetic dyes has serious concerns. Membrane-based wastewater treatments are emerging as a preferred choice for removing dyes from water. Poly(vinylidene fluoride) (PVDF)-based nanomembranes have gained much popularity due to their favorable features. This review explores the application of PVDF-based nanomembranes in synthetic dye removal through various treatments. Different fabrication methods to obtain high performance PVDF-based nanomembranes were discussed under surface coating and blending methods. Studies related to use of PVDF-based nanomembranes in adsorption, filtration, catalysis (oxidant activation, ozonation, Fenton process and photocatalysis) and membrane distillation have been elaborately discussed. Nanomaterials including metal compounds, metals, (synthetic/bio)polymers, metal organic frameworks, carbon materials and their composites were incorporated in PVDF membrane to enhance its performance. The advantages and limitations of incorporating nanomaterials in PVDF-based membranes have been highlighted. The influence of nanomaterials on the surface features, mechanical strength, hydrophilicity, crystallinity and catalytic ability of PVDF membrane was discussed. The conclusion of this literature review was given along with future research.

A rational approach for 3D recognition and removal of L-asparagine via molecularly imprinted membranes

In this study, a L-asparagine (L-Asn) imprinted membranes (L-Asn-MIPs) were synthesized via molecular imprinting for selective and efficient removal of L-Asn. The L-Asn-MIP membrane was prepared by using acrylamide (AAm) and hydroxyethyl methacrylate (HEMA) as a functional monomer and a comonomer, respectively. The membrane was characterized by scanning electron microscopy (SEM) and Fourier Transform infrared spectroscopy (FTIR). The L-Asn adsorption capacity of the membrane was investigated in detail. The maximum L-Asn adsorption capacity was determined as 408.2 mg/g at pH: 7.2, 24 °C. Determination of L-Asn binding behaviors of L-Asn-MIPs also shown with Scatchard analyses. The effect of pH on L-Asn adsorption onto the membrane and also the selectivity and reusability of the L-Asn-MIPs for L-Asn adsorption were determined through L-asparaginase (L-ASNase) enzyme activity measurements. The selectivity of the membrane was investigated by using two different ternary mixtures; L-glycine (L-Gly)/L-histidine (L-His)/L-Asn and L-tyrosin (L-Tyr)/L-cystein(L-Cys)/L-Asn. The obtained results showed that the L-Asn-MIP membranes have a high selectivity towards L-Asn.

The enhancement of dye filtration performance and antifouling properties in amino-functionalized bentonite/polyvinylidene fluoride mixed matrix membranes

Trade-off issue and membrane fouling remain two major issues in the utilization of membrane technology for the water treatment due to reduced membrane permeability and lifetime. In our study, we employed 3-aminopropyltriethoxysilane modified bentonite (BNTAPS) as an anti-fouling modifier to prepare polyvinylidene fluoride (PVDF)-based membranes via the phase inversion method. The effects of BNTAPS concentration on the physical, mechanical, morphological, and filtration performance of the hybrid membranes have been investigated. It was found that the addition of BNTAPS improved the hydrophilicity of the membrane revealed by the decreased water contact angle. Consequently, the pure water flux of PVDF membrane containing 0.5% BNTAPS (PVDF/BNTAPS0.5%) increased to 35.5 L m^-2 h^-1. Moreover, the PVDF/BNTAPS membrane showed a smaller pore diameter and porosity compared to pristine PVDF. The membrane performance evaluation was carried out using cationic and anionic dyes, i.e., methylene blue (MB) and acid yellow (AY17), respectively. Our study revealed that the rejection of each dye was slightly increased for the PVDF/BNTAPS0.5%. However, the flux recovery rate of the PVDF/BNTAPS membrane significantly improved, which directly prolonged the membrane lifetime.

Photocatalytic removal of toxic dyes, liquorice and tetracycline wastewaters by a mesoporous photocatalyst under irradiation of different lamps and sunlight

Simple recyclable K₅CoW₁₂O₄₀/TiO₂ was synthesized and used to remove methyl orange, rhodamine B, direct red 16 and crystal violet toxic organic dyes, liquorice industrial wastewater and tetracycline (TC) as an antibiotic. Photoactivity of the catalyst was checked out under irradiation of various lamps (such as 18 W fluorescent, 300 W Xenon, LED and IR lamps). The best efficiency was obtained by fluorescent lamp at catalyst loading of 3 g/L, initial pH of 5, initial dye concentration of 5 ppm, complete degradation was achieved after 30 min contact time. Mechanistic investigation showed that·O₂ radicals and h⁺ are majorly responsible for photodegradation in this process. Electrochemical investigation, Nyquist, Bode, Mott-Schottky, Tauc plots and photoluminescence proved that using this photocatalyst delay the electron-hole recombination, increase the lifetime of excited electron, extend light absorption to visible region and improve the light absorption capacity. This photocatalyst work well under winter sunlight. Also 97% and 84% dye removal was obtained for liquorice with 300 and 1000 COD at optimal condition. This catalyst showed similar activity for TC wastewater. Photocatalyst was characterized by FE-SEM, EDX, AFM, FT-IR, XRD, PL, DRS, EIS, BJH and BET.