Efficient degradation of organic compounds in landfill leachate via developing bio-electro-Fenton process

Organic matter removal mitigates crystallization inhibition to enhance co-recovery of potassium and phosphorus from wastewater

Magnesium potassium phosphate (MPP) hexahydrate crystallization is a promising approach for the simultaneous recovery of potassium and phosphorus. However, organic matter in the wastewater affects the formation of crystals, which reduces the recovery efficiency. This study constructed the optimal conditions for the formation of MPP crystals, on the basis of which the mechanism of the effect of different types of organic matter on crystallization. The results showed that the using MgCl2 as the magnesium source, potassium and phosphorus recovery efficiencies reached 98.05 % and 99.40 %, respectively, under the following conditions: pH 10, rotation speed of 500 rpm, Mg:K:P molar ratio of 2:1:2, and seed dosage of 5 g/L. Under these conditions, all three organics had an effect on crystallization, with the order of inhibition being sodium alginate > bovine serum albumin > humic acid. Characterization analysis revealed that these organic compounds formed hydrogen bonds with functional groups or complexes with Mg2+ on the crystal surface, hindering crystal growth and modifying crystal morphology. Finally, when liquid digestate was used as the influent for crystallization reaction, removal of organic pollutants led to significant increase in the potassium recovery efficiency.

Increasing nitrogen source by chitosan coupled with nZVI-jelly fig peel biochar to improve O2 reduction to H2O2 and its electrochemical performance

The electrocatalytic process of two-electron oxygen reduction reaction (ORR) presents a promising strategy for synthesizing H₂O₂. Nitrogen-doped carbon materials have attracted considerable interest in their performance as highly active and selective electrocatalysts in this reaction. This study was conducted to produce biochar from the high‑nitrogen content of jelly fig (Ficus pumila var. awkeotsang) peel by pyrolysis, and the biochar was compounded with zero-valent iron as the cathodic catalyst for an electrocatalytic system. Functional groups such as OH, CO, and NH were abundant on the biochar surface produced by heating the jelly fig peel at 600 °C. A 2.6 % N element can enhance the conductivity of the catalyst, while other functional groups can increase the ORR activity on the cathode surface. The hydrothermal synthesis of chitosan and jelly fig peel produced the catalyst, heating the components in a pressurized vessel to facilitate the formation of the catalyst. The catalyst exhibited a high content of oxygen atoms (60.5 %) on the cathode surface, improving the low-oxygen atoms after the high-temperature pyrolysis of biochar. The cathode doped with zero-valent iron compounded with jelly fig peel biochar achieved a high H2O2 yield of 517.5 mg/L, a current efficiency of 81.6 %, and favorable stability.

Dielectric Barrier Discharge (DBD) enhanced Fenton process for landfill leachate nanofiltration: Organic matter removal and membrane fouling alleviation

This study investigated a sustainable approach through dielectric barrier discharge (DBD) enhanced Fenton technology coupling nanofiltration (NF) process for landfill leachate treatment. The DBD/Fe(II)/H2O2 system exhibited significant synergistic effects, removing 55.07 % of TOC and 53.79 % of UV254 within 60 min, respectively. Additionally, the DBD/Fe(II)/H2O2 system demonstrated exceptional performance in removing fluorescent substances and large molecular organic compounds, thereby reducing the formation of cake layer on the nanofiltration membrane. Moreover, membrane flux increased by 2.34 times, with reversible and irreversible resistances decreasing by 75.79 % and 81.55 %, respectively. Quenching experiments revealed ·OH as the primary active species for perfluorooctanoic acid (PFOA) degradation in the DBD/Fe(II)/H2O2 process. The degradation pathway of PFOA was also elucidated via capillary electrophoresis-quadrupole time-of-flight mass spectrometry analysis. Correlation analysis indicated that TOC and EEM were the primary fouling factors. Lastly, through an assessment of energy consumption, economic costs, and carbon dioxide emissions, the advantages and practical application potential of the DBD/Fe(II)/H2O2 system were demonstrated. In summary, the DBD/Fe(II)/H2O2 system emerges as a feasible strategy for NF pretreatment, holding immense potential for treating landfill leachate.

A critical review of approaches to enhance the performance of bio-electro-Fenton and photo-bio-electro-Fenton systems

The development of sustainable advanced energy conversion technologies and efficient pollutant treatment processes is a viable solution to the two global crises of the lack of non-renewable energy resources and environmental harm. In recent years, the interaction of biological and chemical oxidation units to utilize biomass has been extensively studied. Among these systems, bio-electro-Fenton (BEF) and photo-bio-electro-Fenton (PBEF) systems have shown prospects for application due to making rational and practical conversion and use of energy. This review compared and analyzed the electron transfer mechanisms in BEF and PBEF systems, and systematically summarized the techniques for enhancing system performance based on the generation, transfer, and utilization of electrons, including increasing the anode electron recovery efficiency, enhancing the generation of reactive oxygen species, and optimizing operational modes. This review compared the effects of different methods on the electron flow process and fully evaluated the benefits and drawbacks. This review may provide straightforward suggestions and methods to enhance the performance of BEF and PBEF systems and inspire the reader to explore the generation and utilization of sustainable energy more deeply.

Degradation of tetracycline under a wide pH range in a heterogeneous photo bio-electro-fenton system using FeMn-LDH/g-C3N4 cathode: Performance and mechanism

The widespread use of antibiotics and the inefficiency of traditional degradation treatments pose threats to the environment and human health. Previous studies have reported the potential of bio-electro-Fenton (BEF) processes for antibiotic removal. However, some drawbacks, such as a strict pH range of 2-3 and iron sludge generation, limit their large-scale application. Thus, to overcome the narrow pH range of traditional BEF processes, a photo-BEF (PBEF) system was established using a novel FeMn-layered double hydroxide (LDH)/graphitic carbon nitride (g-C3N4) (FM/CN) composite cathode. The performance of the PBEF system was investigated by degrading tetracycline (TC) under low-power LED lamp irradiation. The results indicated that the pH range of the PBEF system could be expanded to 3-11 using an FM/CN cathode, which exhibited a TC removal efficiency of 63.0%-75.9%. The highest TC removal efficiency was achieved at pH 7. The efficient mineralization of TC by the PBEF system can be high, up to 67.6%. In addition, the TC removal mechanism was discussed in terms of reactive oxygen species, TC degradation intermediate analyses, and density functional theory (DFT) calculations. Strong oxidative hydroxyl radicals (·OH) were the dominant reactive oxidizing species in the PBEF system, followed by ·O2- and h+. Three pathways of TC degradation were proposed based on the analysis of intermediates, and the reactive sites attacked by electrophilic reagents were explored using DFT modeling. In addition, the overall toxicity of TC degradation intermediates effectively decreased in the PBEF system. This work offers deep insights into the TC removal mechanisms and performance of the PBEF system over a wide pH range of 3-11.

In-situ microbial protein production by using nitrogen extracted from multifunctional bio-electrochemical system

Upgrading of waste nitrogen sources is considered as an important approach to promote sustainable development. In this study, a multifunctional bio-electrochemical system with three chambers was established, innovatively achieving 2.02 g/L in-situ microbial protein (MP) production via hydrogen-oxidizing bacteria (HOB) in the protein chamber (middle chamber), along with over 2.9 L CO2/(L·d) consumption rate. Also, 69% chemical oxygen demand was degraded by electrogenic bacteria in the anode chamber, resulting in the 394.67 J/L electricity generation. Focusing on the NH4+-N migration in the system, the current intensity contributed 4%-9% in the anode and protein chamber, whereas, the negative effect of -6.69% on contribution was shown in the cathode chamber. On the view of kinetics, NH4+-N migration in anode and cathode chambers was fitted well with Levenberg-Marquardt equation (R2 > 0.92), along with the well-matched results of HOB growth in the protein chamber based on Gompertz model (R2 > 0.99). Further evaluating MPs produced by HOB, 0.45 g/L essential amino acids was detected, showing the better amino acid profile than fish and soybean. Multifunctional bio-electrochemical system revealed the economic potential of producing 6.69 €/m3 wastewater according to a simplified economic evaluation.

Nickel-iron-driven heterogenous bio-electro-fenton process for the degradation of methylparaben

Discharge of emerging contaminants such as parabens in natural water bodies is a grievous concern. Among parabens, methylparaben (MP) is most prevalent due to its extensive usage in personal care and food products and has been purported to trigger hormonal-related diseases. In this regard, the bio-electro-Fenton (BEF) process garners attention for remediating refractory compounds because of its ability to generate in situ hydroxyl radicals (•OH) utilising the energy harvested from electroactive microorganisms. In the present investigation, a Ni-Fe-driven heterogenous BEF system (BEF-MFC) was used to degrade MP from different matrices. At neutral catholyte pH, 99.54 ± 0.22% of MP was removed from an initial concentration of 10 mg/L in 240 min of retention time with an estimated treatment cost of about 1.01 $/m3. The removal rate ameliorated when the catholyte pH was dropped to 3.0 and by imposing an external voltage of 0.5 V, requiring just 120 min to achieve comparable MP removal efficiencies. However, catalyst leaching was higher at acidic pH (leaching of Fe ions = 0.44 mg/L and Ni ions = 0.06 mg/L) and applying external voltage increased the treatment cost slightly to 1.08 $/m3. Further, treatment of 10 mg/L MP-spiked real wastewater at pH of 7.0 with the BEF-MFC attained 85.70 ± 3.30% and 56.50 ± 1.70% reduction in MP and total organic carbon, respectively, in 240 min. In addition, a maximum power density of 205.90 ± 2.27 mW/cm2 was harvested in the BEF-MFC; thus, portraying the dual benefit of Ni-Fe heterogeneous catalyst. Even though, Ni-Fe performed reasonably well as Fenton-cum-cathode catalyst, future endeavours should be poised to fine-tune catalysts to accelerate H2O2 and •OH generation, which will reinforce the scalability of this system.

Treatment of landfill leachate using photocatalytic based advanced oxidation process - a critical review

Landfill leachate is a discrete volumetric component of municipal solid waste; hence, researchers and professionals are more concerned about it because of its obscurity. Innovative treatment and emerging technologies are being scrutinized to address the treatment of landfill leachate challenges. The leading target of this review was to examine the possibility of removing recalcitrant organic pollutants from landfill leachate by photocatalytic-based advanced oxidation processes. A summary of the systematic applicability of conventional treatment for landfill leachate is provided, with a focus on physico-chemical and biological processes. The biological treatment, such as aerobic and anaerobic digestion, is an excellent technique for treating highly concentrated organic pollutants in the wastewater. However, Leachate can scarcely be treated using conventional techniques since it is enriched with refractory organics and inorganic ions. It is clear from the literature review that none of the available combinations of physico-chemical and biological treatments are entirely relevant for the removal of recalcitrant organic pollutants from leachate. Recently, the photo-assisted TiO2/ZnO oxidation has shown an excessively potential and feasible way to treat landfill leachate. TiO2/ZnO photocatalysis is currently developing to treat recalcitrant organic pollutants from landfill leachate. The effect of operating parameters reveals that pH and temperature affect the reaction rate. The addition of oxidant H2O2 to the TiO2/ZnO suspension suggests that TiO2 leads to an increase in the rate of reaction when compared to ZnO. Photocatalytic remediation technique of landfill leachate would support the goal of environmental sustainability by greatly enhancing the effectiveness of treated leachate reutilization. In this review, the selection of the best photocatalytic treatment for leachate based on its systematic relevance and potential conditions, characteristics, cost-effectiveness, essential controlling, discharge limit, long-term environmental effects, and its future study perspectives are emphasized and discussed.

Critical Review on the Mechanisms of Fe2+ Regeneration in the Electro-Fenton Process: Fundamentals and Boosting Strategies

This review presents an exhaustive overview on the mechanisms of Fe³⁺ cathodic reduction within the context of the electro-Fenton (EF) process. Different strategies developed to improve the reduction rate are discussed, dividing them into two categories that regard the mechanistic feature that is promoted: electron transfer control and mass transport control. Boosting the Fe³⁺ conversion to Fe²⁺ via electron transfer control includes: (i) the formation of a series of active sites in both carbon- and metal-based materials and (ii) the use of other emerging strategies such as single-atom catalysis or confinement effects. Concerning the enhancement of Fe²⁺ regeneration by mass transport control, the main routes involve the application of magnetic fields, pulse electrolysis, interfacial Joule heating effects, and photoirradiation. Finally, challenges are singled out, and future prospects are described. This review aims to clarify the Fe³⁺/Fe²⁺ cycling process in the EF process, eventually providing essential ideas for smart design of highly effective systems for wastewater treatment and valorization at an industrial scale.

A review on landfill system for municipal solid wastes: Insight into leachate, gas emissions, environmental and economic analysis

Landfill is one of the common processes for removing and disposing waste materials that comprises the final method of disposing municipal solid waste. Disposal of municipal solid waste through land filling has become an important environmental problem all over the world which results in environmental contamination and pollution. Microbes present in the land act on the dumped materials and decompose the organic content present. The leachate from landfill is rich in organic, inorganic and suspended particles which may cause threat to ecosystem. The pollutants from leachate may be heavy metals, organic and inorganic content and organic compounds. The geological properties of soil get altered when leachate migrates. The physical, chemical and biological properties of the dumped material are determined by the decomposition of substances and microbes acting onto it. Trace gas emission may occur due to volatilization of chemical substances, degradation of waste materials and conversion reactions. The concentration of gas released varies from region to region of dumping, covered and uncovered dumped materials. The current review recommends an engineered landfill design helpful for landfill gas generation which replaces the fossil fuel as a compressed natural gas or liquefied natural gas. The landfill area is separated into organic and inorganic cells to scope at the objective of energy generation and resource recovery. However, the impact of these released gaseous emissions has been analyzed completely.