Alternative environmental friendly process for dehydration of edible Undaria pinnatifida brown seaweed by microwave hydrodiffusion and gravity

Comparative evaluation of physicochemical profile and bioactive properties of red edible seaweed Chondrus crispus subjected to different drying methods

Dehydration of the edible seaweed Chondrus crispus was performed by freeze-drying, conventional oven-drying and emerging microwave hydrodiffusion and gravity (MHG). In this work, the drying kinetics and modelling, estimating specific energy consumption and environmental impact of distinct processes were tested. Color and microstructural features of the dried macroalgae were also evaluated, as well as their nutritive characterization, chemical profile and bioactive potential (antioxidant and antimicrobial activities). Moreover, collected liquid phases from both the defrosted and MHG treated samples were also characterized. All methodologies provided solid phases with an adequate final moisture content. MHG significantly reduced the needed time, specific energy consumption and environmental impact, providing C. crispus with intermediate color and histological structure characteristics. Overall, this trend was also defined to tested chemical parameters and bioactivities. MHG provided aqueous extracts with potential bioactive compounds from this red alga, increasing the efficiency of this drying method.

The impact of aromatic plant-derived bioactive compounds on seafood quality and safety

Plant-derived bioactive compounds have been extensively studied and used within food industry for the last few decades. Those compounds have been used to extend the shelf-life and improve physico-chemical and sensory properties on food products. They have also been used as nutraceuticals due to broad range of potential health-promoting properties. Unlike the synthetic additives, the natural plant-derived compounds are more acceptable and often regarded as safer by the consumers. This chapter summarizes the extraction methods and sources of those plant-derived bioactives as well as recent findings in relation to their health-promoting properties, including cardio-protective, anti-diabetic, anti-inflammatory, anti-carcinogenic, immuno-modulatory and neuro-protective properties. In addition, the impact of applying those plant-derived compounds on seafood products is also investigated by reviewing the recent studies on their use as anti-microbial, anti-oxidant, coloring and flavoring agents as well as freshness indicators. Moreover, the current limitations of the use of plant-derived bioactive compounds as well as future prospects are discussed. The discoveries show high potential of those compounds and the possibility to apply on many different seafood. The compounds can be applied as individual while more and more studies are showing synergetic effect when those compounds are used in combination providing new important research possibilities.

Impacts of novel blanching treatments combined with commercial drying methods on the physicochemical properties of Irish brown seaweed Alaria esculenta

Alaria esculenta is one of the most abundant edible brown seaweeds in Irelandandisconsidered an excellent source of nutrients, sought after by the food, nutraceutical and pharmaceutical industries. Seaweed is typically blanched and dried prior to consumption to enhance the end-product quality attributes and shelf life. Three blanching techniques were examined in this work; conventional hot water blanching, novel ultrasound blanching and microwave blanching. The L* and b*colour metrics were affected significantly (P < 0.01) by the processing methods. There were 76 volatile compounds detected in blanched and dehydrated Alaria esculenta. Freeze-dried samples after treatment with microwave alone (at 1000 W) and microwave (800 W) combined with ultrasound (at 50% amplitude) had the highest retention rate of volatile compounds (up to 98.61%). Regarding mineral content, drying methods significantly affected (P < 0.05) the content of Ca, Co, Cu and Fe, while blanching treatments significantly affected (P < 0.05) the content of Na, Cu, Fe and Mn.

Novel postharvest processing strategies for value-added applications of marine algae

Marine algae are regarded as a promising nutrients resource in future as they can be sustainably cultured without land and high investment. These macroalgae are now widely processed into food and beverages, fertilizers and animal feed. Furthermore, bioactive compounds such as polysaccharides and polyphenols in seaweeds have proven to have antibacterial, antiviral and antifungal properties that can be utilized in cosmeceuticals, nutraceuticals and pharmaceuticals. As a key procedure in seaweed production, the postharvest process not only requires more laboured and energy but also affect the quality of the final product significantly. This article reviewed all current postharvest processes and technologies of seaweed and addressed potential postharvest strategies for seaweed production. © 2021 Society of Chemical Industry.

Microwave hydrodiffusion and gravity as a sustainable alternative approach for an efficient apple pomace drying

Apple pomace valuation has been impaired by its high perishability and absence of fast drying approaches demanded by industry. This work aimed to assess the feasibility of Microwave Hydrodiffusion and Gravity (MHG) process applied for apple pomace drying using discrete delivery powers (300-900 W) and comparison with hot-air drying (40-100 °C). To dry 0.4 kg of apple pomace (81% moisture), hot-air drying required 3.6-9.9 h with estimated water evaporation flux of 1.0-3.5 mL/min. For MHG, which processed 1.2 kg, these corresponded to 1.0-2.6 h and 5.1-13.9 mL/min. Furthermore, MHG allowed water recovery containing part of apple pomace phenolic compounds and carbohydrates. The dried pomace was stable for 2 years, after which phenolic compounds and polysaccharides were still recoverable by hot water extractions. These results pave the way for MHG to be used for apple pomace and other by-products preservation, boosting their conversion into valuable co-product for valuation of its components.

Optimization of ohmic heating-assisted osmotic dehydration as a pretreatment for microwave drying of quince

In this study, the ohmic heating system was used as a novel application for osmotic dehydration of quince. After osmotic dehydration, samples were dried by microwave. In this regard, the effects of process variables such as electrical field strengths (20, 30 and 40 V/cm), holding time (10, 20 and 30 minutes), microwave power (90, 180 and 270 W) and sucrose concentration (0%, 25% and 50%) on dielectric constant, dielectric loss factor, rehydration ratios, total phenolic compounds and color values were investigated by response surface methodology (RSM). Optimum conditions were found as 40 V/cm electrical field strength, 30 min holding time, 16.67% sucrose concentration and 270 W microwave power. Total phenolic content, rehydration ratio, color differences and dielectric properties of the novel method were found to be higher than that of control. Moreover, Midilli and Wang & Sing models gave the superior fit to the moisture ratio data obtained during drying.

Applications of ultrasound to enhance fluidized bed drying of Ascophyllum Nodosum: Drying kinetics and product quality assessment

In this study, ultrasound either as a pretreatment technique or as an integrated technique was employed to enhance fluidized bed drying of Ascophyllum nodosum, and drying kinetics and dried product quality were assessed. In order to compare technology efficiency and dried product qualities, oven drying and fluidized bed drying (FBD) were employed. The novel drying methods included airborne ultrasound-assisted fluidized bed drying (AUA), ultrasound pre-treatment followed by FBD (USP), and hot water blanching pre-treatment followed byFBD (HWB). Six drying kinetics models were used to describe the drying curves, among which the Page model was the best in fitting USP and AUA. Model by Millidi et al. was employed to describe HWB. Airborne ultrasound in AUA did not reduce energy consumption or drying time, but retained total phenolic content (TPC) as well as colour, and exhibited the highest yield among the novel drying methods. USP and HWB showed lower energy consumption and drying time considerably, but the TPC was the lowest among the studied methods. At the same time, USP dried product exhibited the lowest aw, followed by HWB and then AUA. This studyalso demonstrated that FBD could be a very practical drying method on Irish brown seaweed, and ultrasound-assisted drying methods may have potential developments in Irish brown seaweed drying process.

Comparison of physicochemical properties and antidiabetic effects of polysaccharides extracted from three seaweed species

Three algae polysaccharides (APs) extracted from Ascophyllum nodosum (ANP), Fucus vesiculosus (FVP) and Undaria Pinnatifida (USP) significantly differed in the zeta potential, water and oil holding capacity, monosaccharide composition, organic element composition, molecular weight distribution, microstructure and rheological properties. Antidiabetic effects of APs were compared by oral intervention at the dose of 400 mg/kg·body weight/day in high sugar and fat diets and streptozotocin injection induced type 2 diabetic rats. The analysis of body weight, water intake, fasting blood glucose, insulin, oral glucose tolerance, blood lipid indicators (including total cholesterol (TC), triglyceride (TG), low density lipoprotein cholesterol (LDL-C) and free fatty acid (FFA)), liver function indexes (involving alanine aminotransferase (ALT) and aspartate aminotransferase (AST)) and renal function profiles (comprising uric acid (UA) and urea nitrogen (BUN)) showed that APs possessed obvious antidiabetic activities, and FVP showed better effects in controlling the levels of FFA, AST, ALT, UA and BUN. Intervention of FVP reduced the total bile acid (TBA) level and elevated high density lipoprotein cholesterol (HDL-C) level of diabetic rats. Histomorphological observation further demonstrated that APs, especially FVP, could attenuate liver and kidney damage caused by diabetes. This study concluded that the antidiabetic effects of ANP, FVP and USP were distinctly different, which might be attributed to their different chemical structures. Therefore, the structure-activity relationship and antidiabetic mechanism of APs will be our future research direction.

Microwave Hydrodiffusion and Gravity (MHG) Extraction from Different Raw Materials with Cosmetic Applications

Microwave hydrodiffusion and gravity (MHG) and ethanolic solid-liquid extraction were compared using selected plant sources. Their bioactive profile, color features, and proximate chemical characterization were determined. MHG extracts, commercial antioxidants, and three distinct types of thermal spring water were used in a sunscreen cream formulation. Their bioactive capacity, chemical and rheological properties were evaluated. MHG Cytisus scoparius flower extract provided the highest bioactive properties. Pleurotus ostreatus MHG liquor exhibited the highest total solid extraction yield. The Brassica rapa MHG sample stood out for its total protein content and its monosaccharide and oligosaccharide concentration. Quercus robur acorns divided into quarters supplied MHG extract with the lowest energy requirements, highest DPPH inhibition percentage, total lipid content and the highest enzyme inhibition. The chemical and bioactive capacities stability of the sunscreen creams elaborated with the selected MHG extracts and the thermal spring waters showed a similar behavior than the samples containing commercial antioxidants.

Recent Advances in Microwave Assisted Extraction of Bioactive Compounds from Complex Herbal Samples: A Review

Microwaves are utilized for extraction of Phytoconstituents from complex herbal sample as a result of incredible research. Conventional extraction strategies are tedious and need more solvents and are no more relevant for thermal sensitive plant components. This review emphasize on the working and significance of microwave extraction technology in herbal research and medical field. The extraction step must be more yielding; quick, particular, not more solvent consuming, ensuring stability of thermolabile components and these features are available with microwave extraction method. In this nonconventional technology heat is created utilizing microwave energy. The important parameters that influence extraction efficiency are solvent properties, volume, duration of exposure, microwave control, system attributes, temperature and application were discussed in this article. The microwave assisted extraction, as green technology is contrasted with other extraction technique. This review is intended to discuss this green extraction technique along with its critical parameters for extracting bioactive compounds from complex plant matrices.