Ohmic heating for infant formula processing: Evaluating the effect of different voltage gradient

Pulsed electric field enhances glucose glycation and emulsifying properties of bovine serum albumin: Focus on polarization and ionization effects at a high reaction temperature

Previous studies demonstrated that the non-thermal effects of pulsed electric fields can promote protein glycation below 40 °C, but it does not always enhance the emulsifying properties of proteins, such as in the bovine serum albumin/glucose model. Therefore, the aim of this study was to investigate the impact of non-thermal effects on the glucose glycation and emulsification properties of bovine serum albumin at 90 °C. The results of circular dichroism, surface hydrophobicity, and molecular dynamics simulations showed that the polarization effect increased the degree of glycation of bovine serum albumin-glucose conjugates from 12.82 % to 21.10 % by unfolding protein molecule, while the emulsifying stability index was increased from 79.17 to 100.73 compared with the control. Furthermore, the results of principal component analysis and Pearson correlation analysis indicated that the ionization effect and the free radicals generated by pulsed electric fields significantly (p < 0.05) inhibited browning and reduced free sulfhydryl content. This study demonstrated that pulsed electric fields combined with heating can prepare glycated proteins with good emulsifying properties in a short period of time and at temperatures lower than conventional heating while reducing energy consumption. This processing strategy has potential applications in improving the emulsifying performance of highly stable proteins.

Effects of ohmic heating with different voltages on the quality and microbial diversity of cow milk during thermal treatment and subsequent cold storage

Ohmic heating (OH), an innovative heating technology, presents potential applications in the pasteurization of liquid foods. Therefore, the study was conducted to evaluate the effect of OH at various voltage gradients (10 V/cm, 12.5 V/cm, and 15 V/cm) and water bath (WB) on microbial inactivation, physicochemical and sensory properties and microbial flora of pasteurized milk. Results indicated that OH with higher voltage could effectively inactivate microorganisms in milk, requiring less heating time and energy. Moreover, OH treatment at higher voltages could decelerate lipid oxidation and better maintain the sensory quality and essential amino acids content of milk. Additionally, all treatments significantly altered the microbial community, and during storage, the microbial community in milk treated with 10 V/cm and 12.5 V/cm OH remained relatively stable. OH treatments with voltage gradients exceeding 12.5 V/cm could effectively inactive microorganisms and maintain the quality attributes of milk.

Insights into application progress of seafood processing technologies and their implications on flavor: a review

Seafood tends to be highly vulnerable to spoilage and deterioration due to biochemical reactions and microbial contaminations, which requires appropriate processing technologies to improve or maintain its quality. Flavor, as an indispensable aspect reflecting the quality profile of seafood and influencing the final choice of consumers, is closely related to the processing technologies adopted. This review gives updated information on traditional and emerging processing technologies used in seafood processing and their implications on flavor. Traditional processing technologies, especially thermal treatment, effectively deactivate microorganisms to enhance seafood safety and prolong its shelf life. Nonetheless, these methods come with limitations, including reduced processing efficiency, increased energy consumption, and alterations in flavor, color, and texture due to overheating. Emerging processing technologies like microwave heating, infrared heating, high pressure processing, cold plasma, pulsed electric field, and ultrasound show alternative effects to traditional technologies. In addition to deactivating microorganisms and extending shelf life, these technologies can also safeguard the sensory quality of seafood. This review discusses emerging processing technologies in seafood and covers their principles, applications, developments, advantages, and limitations. In addition, this review examines the potential synergies that can arise from combining certain processing technologies in seafood processing.

Formulation and Physical Stability of High Total Solids Lentil Protein-Stabilised Emulsions for Use in Plant Protein-Based Young Child Formulae

The demand for high-quality plant protein products is increasing and the aim of this work was to evaluate the impact of increasing the total solids content on the formation and stability of lentil protein stabilised oil-in-water emulsions. A series of emulsions were formulated using different proportions of total solids: 23, 26, 29, 32, and 35% (w/v). The emulsions were formulated using three ingredients-lentil protein, sunflower oil, and maltodextrin-which made up 15.85, 27.43, and 56.72% (w/w) of the total solids, respectively. The changes in apparent viscosity, particle size distribution, and colour during thermal processing were evaluated, with the physical stability investigated using an analytical centrifuge. The apparent viscosity of the solutions increased with total solids content (25.6 to 130 mPa.s^-1), as did redness colour intensity (a* value increased from 5.82 ± 0.12 to 7.70 ± 0.09). Thermal processing resulted in greater destabilisation for higher total solids samples, as evidenced by greater changes in particle size, along with decreased redness colour. These results bring a better understanding of high total solids plant protein emulsions and factors affecting their stability, which could be used for the development of cost-effective and sustainable processing solutions in the production of plant protein young child formulae.

A comprehensive review of the principles, key factors, application, and assessment of thawing technologies for muscle foods

For years, various thawing technologies based on pressure, ultrasound, electromagnetic energy, and electric field energy have been actively investigated to minimize the amount of drip and reduce the quality deterioration of muscle foods during thawing. However, existing thawing technologies have limitations in practical applications due to their high costs and technical defects. Therefore, key factors of thawing technologies must be comprehensively analyzed, and their effects must be systematically evaluated by the quality indexes of muscle foods. In this review, the principles and key factors of thawing techniques are discussed, with an emphasis on combinations of thawing technologies. Furthermore, the application effects of thawing technologies in muscle foods are systematically evaluated from the viewpoints of eating quality and microbial and chemical stability. Finally, the disadvantages of the existing thawing technologies and the development prospects of tempering technologies are highlighted. This review can be highly instrumental in achieving more ideal thawing goals.

Non-Conventional Induction Heat Treatment: Effect of Design and Electrical Parameters on Apple Juice Safety and Quality

The proposed non-conventional induction heating, which combines an MSCP and VDC structure, was proved to have excellent thermal effect. Different from other electric field sterilization, this electrotechnology operates with no electrodes, and it is a continuous-flow process with short-duration (about 20 s). In current study, the parameters related to temperature rise were investigated, including applied voltage, frequency, the diameter of the secondary coil and heating tube, as well as their length, etc. It was demonstrated that a smaller diameter of the heating tube, parallel connection sample coils, and higher frequency were beneficial for the inactivation of microorganisms. At 500 Hz, the optimal condition is 800 V, d₁ = 2 mm, and L₁ = 10 cm. Notably, the system could inactivate all microorganisms and maintained the physicochemical properties of apple juice at 40 kHz. It suggests that this structural design has the potential for industrial applications and the proposed induction heating can realize the rapid sterilization of liquid food without applying electrodes.

Understanding the factors affecting the surface chemical composition of dairy powders: a systematic review

Dairy powder, with abundant chemical components such as protein, fat, and lactose possessing diverse physical and chemical structures, can exhibit a surface composition distinct from its bulk content during the conversion of liquid milk into dry powder. Surface chemical composition is a significant parameter in the dairy industry, as it is directly associated with the techno-functional properties of dairy powder products. The current work provides an overview of the factors influencing the surface composition of dairy powders such as the bulk composition of raw milk (animal source and formulation), liquid dairy processing (homogenization, thermal treatment, and evaporation), the drying process (drying methods as well as operating conditions during the most commonly used spray drying), and storage conditions (temperature, relative humidity, and duration). The underlying mechanisms involved in the variations of particle surface composition include the mechanical properties of emulsion, milk fat globules redistribution caused by mechanical forces, adsorption competition and interactions of ingredients at the water/air interface, dehydration-induced alterations in particle structure, corresponding solid/solutes segregation differentiation during spray drying, and lactose crystallization-induced increase in surface fat during storage. Additionally, future research is suggested to explore the effects of emerging processing technologies on the surface composition modification of dairy powders.

Ohmic Heating Extraction at Different Times, Temperatures, Voltages, and Frequencies: A New Energy-Saving Technique for Pineapple Core Valorization

Pineapple core is considered a processing by-product. This study proposed and evaluated an ohmic heating extraction-based valorization platform to obtain value-added bioactive compounds from pineapple core and studied the effects of four important processing parameters. In this sense, a Taguchi design (L16(4)4) was used to assess the effects of temperature (70, 80, 90, and 100 °C), time (15, 30, 45, and 60 min), voltage (110, 160, 210, and 260 V), and frequency (60, 340, 620, and 900 Hz) on heating rate, come-up time, energy consumption, system performance efficiency, total phenolic compounds (TPC), DPPH, and ABTS. Finally, a side-by-side comparison of optimized ohmic heating (OOH) and conventional extraction was performed, and chemical composition was compared by ultra-performance liquid chromatography equipped with photodiode array detection-mass (UPLC-DAD-ESI-MS-MS). According to the results, increasing temperatures enhanced system performance efficiency but negatively affected TPC and antioxidant values above 90 ℃. Similarly, prolonging the extraction (>30 min) decreased TPC. Further, increasing voltage (from 110 to 260 V) shortened the come-up time (from 35.75 to 5.16 min) and increased the heating rate (from 2.71 to 18.80 °C/min−1). The optimal conditions were 30 min of extraction at 80 °C, 160 V, and 900 Hz. Verification of the optimal conditions revealed that OOH yielded an extract with valuable bioactive compounds and saved 50% of the time and 80% of energy compared to the conventional treatment. The UPLC-DAD-ESI-MS-MS showed that there were similarities between the chemical profiles of the extracts obtained by conventional and OOH methods, while the concentration of major compounds varied depending on the extraction method. This information can help achieve sustainable development goals (SDGs) by maximizing the yield and minimizing energy and time consumption.

Application and Effects of Ohmic-Vacuum Combination Heating on the Quality Factors of Tomato Paste

Ohmic-vacuum combination heating is a common method used in the food industry as a concentration process. In the present study, an OH-VC combination heating system was developed for producing tomato paste at temperatures of 70, 80, and 90 °C and pressure of 0.3, 0.5, and 0.7 bar and electric field of 1.82, 2.73, and 3.64 V/cm using a central composite design. The effects of heating conditions on the quality and sensory evaluation of tomato paste were also evaluated. Each combination of temperature, pressure, and the electric field was quantified for specific energy consumption, energy efficiency, and productivity. A decrease of 35.08% in the amount of acid ascorbic and lycopene content 19.01%, using conventional heating compared to ohmic-vacuum heating under optimized conditions, was attained. The results also highlighted an increase in the amount of HMF (69.79%) and PME (24.33%) using conventional heating compared to ohmic-vacuum heating under optimized conditions. Ascorbic acid, lycopene, titratable acidity, productivity, energy efficiency was higher than conventional heating; on the other hand, HMF, PME, pH, SEC were lower than conventional heating at the applied OH-VC process. No significant effects between OH-VC and conventional heating on the TSS were observed. In addition, OH-VC heating was highly efficient in the inhibition of bacterial growth. Further, a minor effect on the sensory properties of tomato paste with OH-VC heating compared to the conventional treatment. The obtained results indicate a strong potential for an OH-VC combination heating system as a rapid-heating, high-efficiency alternative for saving electrical energy consumption and preserving nutritional value.

Recovery and virulence factors of sublethally injured Staphylococcus aureus after ohmic heating

Ohmic heating (OH) is an alternative thermal processing technique, which is widely used to pasteurize or sterilize food. However, sublethally injured Staphylococcus aureus induced by OH is a great concern to food safety. The recovery of injured S. aureus by OH and virulence factor changes during recovery were investigated in this study. The liquid media (phosphate-buffered saline, buffered peptone water and nutrient broth (NB)), temperature (4, 25 and 37 °C) and pH (6.0, 7.2 and 8.0) influenced the recovery rate and the injured cells completely repaired in NB at 37 °C, pH 7.2 with the shortest time of 2 h. The biofilm formation ability, mannitol fermentation, hemolysis, and coagulase activities decreased in injured S. aureus and recovered during repair process. Quantitative real-time PCR showed the expression of sek, clfB and lukH involved in virulence factors increased during recovery. The results indicated that the virulence factors of injured S. aureus recovered after repair.

Inactivation of Escherichia coli O157:H7 in apple juice via induced electric field (IEF) and its bactericidal mechanism

Non-conventional heating technology based on electric fields can be utilized to process liquid foods. In this study, the induced electric field (IEF) was investigated to clarify its inactivation mechanism on E.coli. Staining results show that inactivation of E.coli by IEF can be attributed to the reversible destruction of the cell membrane, followed by the denaturation of intracellular enzymes, and finally the irreversible rupture of the cell membrane. The increased levels of extracellular proteins and nucleic acids were also observed. IEF treatment at 400 Hz and 800 V (or 53 V/cm) results in a reduction of 4.5 log CFU·mL^-1 in the number of E.coli. Storage life analysis shows that IEF treatment can improve the stability of apple juice and the content of bioactive components. Thus, IEF is a potential technique for liquid food processing.

Ohmic Heating in the Food Industry: Developments in Concepts and Applications during 2013–2020

Various technologies have been evaluated as alternatives to conventional heating for pasteurization and sterilization of foods. Ohmic heating of food products, achieved by passage of an alternating current through food, has emerged as a potential technology with comparable performance and several advantages. Ohmic heating works faster and consumes less energy compared to conventional heating. Key characteristics of ohmic heating are homogeneity of heating, shorter heating time, low energy consumption, and improved product quality and food safety. Energy consumption of ohmic heating was measured as 4.6–5.3 times lower than traditional heating. Many food processes, including pasteurization, roasting, boiling, cooking, drying, sterilization, peeling, microbiological inhibition, and recovery of polyphenol and antioxidants have employed ohmic heating. Herein, we review the theoretical basis for ohmic treatment of food and the interaction of ohmic technology with food ingredients. Recent work in the last seven years on the effect of ohmic heating on food sensory properties, bioactive compound levels, microbial inactivation, and physico-chemical changes are summarized as a convenient reference for researchers and food scientists and engineers.

Ohmic heating increases inactivation and morphological changes of Salmonella sp. and the formation of bioactive compounds in infant formula

The effect of ohmic heating (OH) (50, 55, and 60 °C, 6 V/cm) on the inactivation kinetics (Weibull model) and morphological changes (scanning electron microscopy and flow cytometry) of Salmonella spp. in infant formula (IF) was evaluated. In addition, thermal load indicators (hydroxymethylfurfural and whey protein nitrogen index, HMF, and WPNI) and bioactive compounds (DPPH, total phenolics, ACE, α-amylase, and α-glucosidase inhibitory activities) were also studied. OH presented a more intense inactivation rate than conventional heating, resulting in a reduction of about 5 log CFU per mL at 60 °C in only 2.91 min, being also noted a greater cell membrane deformation, higher formation of bioactive compounds, and lower values for the thermal load parameters. Overall, OH contributed to retaining the nutritional value and improve food safety in IF processing.

Paraprobiotic obtained by ohmic heating added in whey-grape juice drink is effective to control postprandial glycemia in healthy adults

The effect of paraprobiotic Lacticaseibacillus casei 01 inactivated by ohmic heating (8 V/cm, 95 °C/7 min, 60 Hz) whey-grape juice drink at the postprandial glycemia was evaluated. In vitro hypoglycemic activity was assessed by the α-glucosidase and α-amylase inhibition, while in vivo activity was determined using 15 healthy subjects, which consumed bread + probiotic whey drink, bread + paraprobiotic whey drink, and bread alone as a control. The probiotic and paraprobiotic grape-flavored whey drinks showed similar α-glucosidase and α-amylase inhibition (51.2 vs 51.8% and 43.2 vs 44.2%, respectively). The consumption of both paraprobiotic and probiotic whey drinks increased the incremental glucose rate when compared to the control due to the presence of sugar in its composition, without changes in the other parameters evaluated (maximum glucose value, glucose incremental percentage, and peak blood glucose time), showing a reduced glycemic response. In addition, the consumption of the paraprobiotic drink maintained the maximum glucose increase similar to the control, while an increase in this parameter was observed after the consumption of the probiotic drink. Therefore, the paraprobiotic grape-flavored whey drink may be an effective alternative to replace the probiotic product in reducing the postprandial glycemia in healthy individuals.

Dulce de leche submitted to ohmic heating treatment: Consumer sensory profile using preferred attribute elicitation (PAE) and temporal check-all-that-apply (TCATA)

This study aimed to evaluate the effects of the application of ohmic heating (OH) to milk (0, 2, 4, 6, 8, or 10 V cm^-1, 72-75 °C/15 s) on the sensory profiling of dulce de leche (DL) evaluated using preferred attribute elicitation (PAE) and temporal Check-all-that-apply (TCATA) methodologies. In addition a consumer test was also performed. OH-DL samples presented increased scores for all the sensory attributes evaluated. Low or intermediate strength electric fields contributed to increase bitter taste and decrease DL aroma and sweet taste of the products, without impact on the overall liking. When high strength electric fields were applied, higher brightness, fluidity and DL flavor scores were observed, as well as, lower intensities in consistency and sandiness scores, resulting in increased acceptance by consumers. From TCATA data, it could be observed that the perception of all sensory attributes increased as well as increased the strength of the electric fields. Overall, the adoption of electric fields with higher strength in ohmic heating during DL processing is advised, since they improved the intensity and perception of desirable intrinsic DL sensory attributes as well as improved DL overall liking.

Effects of induced electric field (IEF) on the reduction of Saccharomyces cerevisiae and quality of fresh apple juice

The non-conventional technologies about continuous sterilization of liquid food were focused on recently, which is benefits for industrialization. In this study, the machine with an induced electric field was used to sterilize S. cerevisiae in apple juice and the juice quality also was researched. The optimal condition is 800 V, 400 Hz, 5 rpm and 2 mm. Furthermore, the sterilization of the IEF was attributed to non-thermal and thermal effects. The IEF treatment group has a reduction of about 4.6 logs (CFU/mL) in S. cerevisiae at 400 Hz, 800 V, and 2 mm, while the non-thermal group is nearly 2 logs (CFU/mL). The improvement of conductivity and the reduction of pH value imply that IEF might destroy the cell structure. Meanwhile, polyphenol compounds and amino acids in the IEF group were protected well than other groups. Generally, IEF is a potential technology for industrial sterilization of liquid beverages.