Sorption of lead, mercury and cadmium ions in multi-component system using carbon aerogel as adsorbent

Removal of heavy metal ions (Pb2+, Cu2+, Cr3+, and Cd2+) from multimetal simulated wastewater using 3-aminopropyl triethoxysilane grafted agar porous cryogel

In this study, we have developed agar, a seaweed derived polysaccharide based green adsorbent for the removal of heavy metal ions (Pb2+, Cu2+, Cr3+ and Cd2+) from multimetal solution. Porous cryogels of agar grafted with 3-aminopropyl triethoxysilane (APTES) were prepared by freeze-drying. The adsorption capacity and selectivity of the optimized APTES-agar cryogel for heavy metal ions (Cu2+, Cr3+, Pb2+, Cd2+) were investigated in multimetal solutions. >95 % of all the cationic metal ions were removed from 400 mg/L multimetal metal solutions having equal concentrations of each metal at pH 5.5. The experimental adsorption capacities of Cr3+, Cu2+, Pb2+, and, Cd2+ were changed from 39.14, 39.0, 39.20, 37.93 mg/g, to 52.58, 52.70, 45.53, 31.10 mg/g, respectively, for the 400 mg/L and 800 mg/L multimetal solutions suggesting competitive adsorption of the metal ions for active sites. The competitive adsorption studies showed that Cd ions had lower affinity than other metal ions for active sites on APTES grafted agar surface, and adsorption followed in the order of Cu2+ ≈ Cr3+ > Pb2+ > Cd2+. The developed seaweed-derived agar-based porous adsorbent exhibits promise in the removal of several heavy metal ions from wastewater, and this approach would increase the use of natural polysaccharides that are sustainable.

The application of machine learning methods for prediction of heavy metal by activated carbons, biochars, and carbon nanotubes

Carbonaceous materials are commonly used as adsorbents for heavy metals. The determination of the adsorption capacity needs time and energy, and the key factors affecting the adsorption capacity have not been determined. Therefore, a new and efficient method is needed to predict the adsorption capacity and explore the decisive factors in the adsorption process. In this study, three tree-based machine learning models (i.e., random forest, gradient boosting decision tree, and extreme gradient boosting) were developed to predict the adsorption capacity of eight heavy metals (i.e., As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn) on activated carbons, biochars, and carbon nanotubes using 3674 data points extracted from 151 journal articles. After a comprehensive comparison, the gradient boosting decision tree had the best performance for a combined model based on all data (R2 = 0.9707, RMSE = 0.1420). Moreover, independent models were developed for three datasets classified by the adsorbent and eight datasets classified by the heavy metals. In addition, a graphical user interface was built to predict the adsorption capacity of heavy metals. This study provides a novel strategy and convenient tool for the removal of heavy metals and can help to improve the removal efficiency of heavy metals to build a healthier world.

Hypercrosslinked waste polycarbonate to remove heavy metal contaminants from wastewater

In this research, the waste polycarbonate was hypercrosslinked during the Friedel-Crafts reaction to eliminate metallic ions from the wastewater solution. The experiments for inspecting the adsorption behavior of lead and cadmium ions were conducted at the initial concentration of 20-100 mg/L, contact time of 10-80 min, temperature of 20-80 °C, and pH of 6-11. The isotherm, kinetic, and thermodynamic models have been used to explain the behavior of the metal ions removal process. The correlation coefficient and adsorption capacity of the kinetic model for cadmium ion have obtained 0.995 and 160.183 mg/g, respectively, and the correlation coefficient and adsorption capacity of the kinetic model for lead ion has obtained 0.998 and 160.53 mg/g, respectively, which declared that the cascade was not monolayer. The correlation coefficient of the Freundlich is calculated at 0.995 and 0.998 for Cd and Pb, respectively, indicating the resin plane was not homogenized. The n constant for cadmium and lead ions has been calculated at 2.060 and 1.836, respectively, confirming that the resin is not homogenized, and the process has performed well. Afterward, the values of enthalpy and Gibbs free energy changes were obtained at - 7.68 kJ/mol and - 0.0231 kJ/mol.K for lead ions, respectively, which implies the exothermic and spontaneous state of the process. The values of enthalpy and Gibbs free energy changes have been obtained at - 6.62 kJ/mol and - 0.0204 kJ/mol.K for cadmium ions, respectively, which implies the exothermic and spontaneous nature of the adsorption. Also, the optimal empirical conditions for lead and cadmium ions have been found at a time of 60 min, temperature of 20 °C, initial concentration of 100 mg/L, and pH of 10. At a time of 45 min, the diffusion coefficient and mass transfer coefficient for lead ions have been calculated at 0.1269 × 1020 m2/s and 0.2028 × 1015 m/s, respectively. In addition, at a time of 45 min, the diffusion coefficient and mass transfer coefficient for cadmium ions have been calculated at 0.1463 × 1020 m2/s and 0.1054 × 1015 m/s, respectively. Moreover, the mechanism study explains that the C-O-C and C-H in the aromatic groups have a crucial aspect in the bond formation among metallic ions and resin.

Synthesis, characterization, and application of pristine and clay-templated carbon xerogel microspheres for removing diclofenac and heavy metals from water solution

Organic xerogel microspheres (SX) were synthesized by inverse emulsion sol-gel polymerization and carbonized to obtain carbon xerogel spheres (SXCs). The catalyst was K₂CO₃ or Fe(C₂H₃O₂)₂, and the clay sodium sepiolite (SNa) or exfoliated vermiculite (V_exf) was added during the synthesis. Depending on the catalyst and clays, the SXCs were designated SXC-K, SXC-Fe, V_exf-K, V_exf-Fe, SNa-Fe, and SNa-K. At pH = 7 and T = 25 °C, the SXCs' adsorption capacities towards diclofenac (DCF) in water increased as follows: SXC-K < V_exf-Fe < SXC-Fe < SNa-Fe < SNa-K < V_exf-K and this order is associated with the SXCs' surface area and mesopore volume. The V_exf-K displayed the highest capacity for DCF due to its optimal textural and chemical properties, and the DCF maximum uptake was 560 mg/g at pH = 6 and T = 35 °C. The adsorption capacity towards Cd²⁺ and Pb²⁺ decreased as SX-K > SX-Fe > SXC-K > SXC-Fe, indicating that the non-carbonized materials (SX) presented higher adsorption capacity than the SXCs because the SXs had a higher acidic site content. Adding SNa or V_exf to SXs enhanced the adsorption capacity towards Cd(II), and SNa-SX-K presented an exceptionally high capacity of 182.7 mg/g. This synergistic effect revealed that the Cd²⁺ was adsorbed on the SX-K acidic sites and by cation exchange on the SNa.

Facile Preparation and Characterization of Silica Nanoparticles from South Africa Fly Ash Using a Sol–Gel Hydrothermal Method

Silica nanoparticles (SNPs) consist of several applications which include lightweight aggregates, energy storage, and drug delivery. Nevertheless, the silica reagents used in SNP synthesis are both costly and hazardous. As a result, it is critical to look for other sources of silica. For this research, a simple sol–gel hydrothermal approach is used to make SNPs from South African fly ash (SAFA). SAFA is classified as fly ash class F according to X-ray fluorescence (XRF) analysis. The wide-angle X-ray diffraction (XRD) pattern reveals the structural composition of SAFA and the amorphous phase of extracted SNPs, while Fourier transform infrared (FTIR) examination reveals the presence of silanol and siloxane groups. Basic SNPs were generally spherical with diameters of about 60 nm, according to scanning electron microscopy (SEM) and transition electron microscope (TEM) studies. The presence of SiO2 is confirmed by energy-dispersive X-ray spectroscopy (EDX) spectrum analysis. Particle size assessment indicates particle sizes ranging from 48 nm to 87 nm in diameter, with a mean diameter of 67 nm. The application of SNPs in wastewater treatment demonstrated that they can be used to remove Cd2+ from an aqueous solution. This research offers new ideas for using South African fly ash in SNP manufacturing.

Removal of car battery heavy metals from wastewater by activated carbons: a brief review

Spent automobile batteries are one of the most significant secondary sources of harmful heavy metals for the environment. After being incorporated into the aquatic ecosystems, these metals disseminate to various plants, microorganisms, and the human body and cause multiple adverse effects. Activated carbons (ACs) have long been used as an effective adsorbent for different heavy metals in wastewater treatment processes. Although numerous research works have been published to date on this topic, they are scattered in the literature. In this review, we have assembled these works and provided an extensive overview of the application of ACs for treating spent car battery heavy metals (CBHMs) from aquatic systems. The preparation of ACs from different precursor materials, their application in the adsorption of CBHMs, the adsorption mechanism, kinetics, adsorption isotherms and various parameters that may affect the adsorption processes have been discussed in detail. A brief comparative analysis of the adsorption performances of ACs prepared from different precursor materials is also provided. Finally, recommendations for future research works are also offered.

Ultralight, Mechanically Enhanced, and Thermally Improved Graphene-Cellulose-Polyethyleneimine Aerogels for the Adsorption of Anionic and Cationic Dyes

Graphene-cellulose-polyethyleneimine aerogels (GA-MCC-PEI) were prepared using a simple, environmentally friendly method to remove anionic and cationic dyes in water. Graphene-cellulose hydrogels were prepared using a hydrothermal method and then immersed in a polyethyleneimine aqueous solution for 48 h to obtain graphene-cellulose-polyethyleneimine hydrogels, which were then freeze-dried. The light and porous composite aerogels had a good compression resistance, and the maximum allowable pressure of the graphene-cellulose-polyethyleneimine aerogel with a cellulose content of 43% was 21.76 kPa, which was 827 times its weight. Adsorption of the anionic dye amaranth and the cationic dye methylene blue by the graphene-cellulose-polyethyleneimine aerogel was satisfactorily modeled using the Langmuir isothermal equation, indicating monolayer adsorption. When the cellulose content was 39%, the equilibrium adsorption capacities of the composite aerogel for amaranth and methylene blue were 369.37 mg/g and 237.33 mg/g, respectively. This graphene-cellulose-polyethyleneimine aerogel can be used to remove dye pollutants in water to maintain ecological balance, thus broadening the application space of aerogel materials, that is, as adsorbents in different environments.

Potential of hypercrosslinked microporous polymer based on carbazole networks for Pb(II) ions removal from aqueous solutions

In this research, porous adsorbents of hypercrosslinked microporous polymer based on carbazole networks (HCP-CN) were synthesized for Pb(II) elimination from wastewaters. The results demonstrated that the extreme HCP-CN adsorbents utilization in wastewater treatment could remove more than 99.88% of Pb (II) ions. Furthermore, the two consumed adsorbents similarly indicated rapid adsorption kinetics, and it merely took a while to achieve adsorption equilibrium. These characteristics showed that HCP-CN adsorbent was an outstanding candidate for Pb(II) elimination from wastewater. Besides, the thermodynamic characteristics involving Gibbs free energy change (∆G⁰), entropy change (∆S⁰), and enthalpy change (∆H⁰) of the adsorption procedure were evaluated, and the results affirmed that the adsorption process was exothermic and spontaneous. In addition, response surface methodology (RSM) as a statistical investigation was used to optimize adsorption factors to obtain maximum adsorption capacity and investigate the interactive effect of parameters using central composite design (CCD). Optimum conditions obtained by RSM for maximum adsorption capacity of 26.02 mg/g are 35 °C, 40 mg/L, 11, 60 min, and 99.88 for temperature, initial concentration, pH, time, and removal percent, respectively. In the kinetic modeling study, the second-order model was selected as the best model. The values R² at temperatures 35 °C, 40 °C, and 55 °C are 0.997, 0.9997, and 0.998, respectively. In the isotherm modeling, Hill model with a value R² of 0.9766 has a superior precision compared to the other isotherm models. Also, the values of ΔH and ΔS at Pb(II) concentration of 60 mg/L are 122.622 kJ/mol and 0.463 kJ/mole K, respectively.

The green design of corncob cellulose/reduced graphene oxide-derived hierarchical porous aerogels for efficient dye adsorption

The preparation of cellulose/rGO composite aerogels was carried out.

Simultaneous adsorptive removal of conventional and emerging contaminants in multi-component systems for wastewater remediation: A critical review

The rapid growth of population and industrialization results in pollution of freshwater sources which leads to the water stress conditions on the world in future. Adsorption is a low cost and popular technique for the removal of contaminants from water bodies. Most of the reports till date are on removal of a single component from aqueous solutions using this technique, but the real-world effluent contains multiple contaminants such as dyes, heavy metals, pesticides, antibiotics and many more. Therefore, a study on simultaneous removal of contaminants is highly needed to obtain a suitable adsorbent that can be used commercially. This critical review provides a detailed study on the removal of contaminants in the presence of other contaminant/s i.e., from a multi-component system (MCS). The different possible interaction mechanisms in MCS like synergism, antagonism and non-interaction are discussed. The MCS containing the mixture of conventional contaminants such as heavy metals and dyes, and other emerging contaminants such as antibiotics, organic contaminants, pesticides and personal care products are explained in depth. This review article will be helpful for researchers working in the field of simultaneous removal of contaminants from MCSs for wastewater remediation.

Microscopic techniques for fabrication of polyethersulfone thin-film nanocomposite membranes intercalated with UiO-66-SO3 H for heavy metal ions removal from water

Environmental remediation of heavy metals from wastewater is becoming popular area in the field of membrane technology. Heavy metals are toxic in nature and have ability to bioaccumulate in water bodies. In current study, zirconium-based metal organic frameworks (MOFs), that is, UiO-66 and UiO-66-SO₃ H with a mean diameter of 200 nm were synthesized and intercalated into polyethersulfone (PES) substrate to fabricate thin-film nanocomposite (TFN) membranes via an interfacial polymerization (IP) method. TFN membranes exhibit higher selectivity and permeability as compared to thin-film composite (TFC) membranes for heavy metals, such as cadmium (Cd) and mercury (Hg). Zirconium-based MOFs are highly stable in water and due to smaller pore size enhanced hydrophilicity of TFN membranes. In addition, TFN membrane with functionalized MOF (UiO-66-SO₃ H) performed best as compared to TFC and TFN with UiO-66 MOF. The effect of loading of different weight percentages (wt%) of both MOFs for TFN membranes was also investigated. The TFN membranes with loading (0.2 wt%) of UiO-66-SO₃ H displayed highest permeability of 9.57 LMH/bar and notable rejections of 90% and 87.7% toward Cd and Hg, respectively. To our best understanding, it is the first study of intercalating functionalized UiO-66-SO₃ H in TFC membranes by IP and their application on heavy metals especially Cd and Hg.

Bio-Based and Robust Polydopamine Coated Nanocellulose/Amyloid Composite Aerogel for Fast and Wide-Spectrum Water Purification

Water contamination resulting from human activities leads to the deterioration of aquatic ecosystems. This restrains the access to fresh water, which is the leading cause of mortality worldwide. In this work, we developed a bio-based and water-resistant composite aerogel from renewable nanofibrils for water remediation application. The composite aerogel consists of two types of cross-linked nanofibrils. Poly(dopamine)-coated cellulose nanofibrils and amyloid protein nanofibrils are forming a double networked crosslinked via periodate oxidation. The resulting aerogel exhibits good mechanical strength and high pollutants adsorption capability. Removal of dyes (rhodamine blue, acriflavine, crystal violet, malachite green, acid fuchsin and methyl orange), organic traces (atrazine, bisphenol A, and ibuprofen) and heavy metal ions (Pb(II) and Cu(II)) from water was successfully demonstrated with the composite aerogel. More specifically, the bio-based aerogel demonstrated good adsorption efficiencies for crystal violet (93.1% in 30 min), bisphenol A (91.7% in 5 min) and Pb(II) ions (94.7% in 5 min), respectively. Furthermore, the adsorption-desorption performance of aerogel for Pb(II) ions demonstrates that the aerogel has a high reusability as maintains satisfactory removal performances. The results suggest that this type of robust and bio-based composite aerogel is a promising adsorbent to decontaminate water from a wide range of pollutants in a sustainable and efficient way.

Adsorptive Removal of Arsenic and Lead by Stone Powder/Chitosan/Maghemite Composite Beads

Arsenic (As) and lead (Pb) contamination in groundwater is a serious problem in countries that use groundwater as drinking water. In this study, composite beads, called SCM beads, synthesized using stone powder (SP), chitosan (Ch), and maghemite (Mag) with different weight ratios (1/1/0.1, 1/1/0.3, and 1/1/0.5 for SP/Ch/Mag) were prepared, characterized and used as adsorbents for the removal of As and Pb from artificially contaminated water samples. Adsorption isotherm experiments of As and Pb onto the beads were conducted and single-solute adsorption isotherm models such as the Langmuir, Freundlich, Dubinin–Radushkevich (DR), and dual mode (DM) models were fitted to the experimental data to analyze the adsorption characteristics. The maximum adsorption capacities of the SCM beads were 75.7 and 232.8 mmol/kg for As and Pb, respectively, which were 40 and 5.6 times higher than that of SP according to the Langmuir model analyses. However, the DM model had the highest determinant coefficient (R²) values for both As and Pb adsorption, indicating that the beads had heterogenous adsorption sites with different adsorption affinities. These magnetic beads could be utilized to treat contaminated groundwater.

A Review of Adsorbents for Heavy Metal Decontamination: Growing Approach to Wastewater Treatment

Heavy metal is released from many industries into water. Before the industrial wastewater is discharged, the contamination level should be reduced to meet the recommended level as prescribed by the local laws of a country. They may be poisonous or cancerous in origin. Their presence does not only damage people, but also animals and vegetation because of their mobility, toxicity, and non-biodegradability into aquatic ecosystems. The review comprehensively discusses the progress made by various adsorbents such as natural materials, synthetic, agricultural, biopolymers, and commercial for extraction of the metal ions such as Ni2+, Cu2+, Pb2+, Cd2+, As2+ and Zn2+ along with their adsorption mechanisms. The adsorption isotherm indicates the relation between the amount adsorbed by the adsorbent and the concentration. The Freundlich isotherm explains the effective physical adsorption of the solute particle from the solution on the adsorbent and Langmuir isotherm gives an idea about the effect of various factors on the adsorption process. The adsorption kinetics data provide valuable insights into the reaction pathways, the mechanism of the sorption reaction, and solute uptake. The pseudo-first-order and pseudo-second-order models were applied to describe the sorption kinetics. The presented information can be used for the development of bio-based water treatment strategies.

Silica Aerogels/Xerogels Modified with Nitrogen-Containing Groups for Heavy Metal Adsorption

Heavy metals are common inorganic pollutants found in the environment that have to be removed from wastewaters and drinking waters. In this work, silica-derived aerogels and xerogels were modified via a co-precursor method to obtain functional adsorbents for metal cations. A total of six formulations based upon four different functional precursors were prepared. The materials′ structural characterization revealed a decreased porosity and surface area on modified samples, more prominent in xerogel counterparts. Preliminary tests were conducted, and the prepared samples were also compared to activated carbon. Three samples were selected for in-depth studies. Isotherm studies revealed that the pre-selected samples remove well copper, lead, cadmium and nickel, and with similar types of interactions, following a Langmuir trend. The adsorption kinetics starts very fast and either equilibrium is reached quickly or slowly, in a two-stage process attributed to the existence of different types of active sites. Based on the previous tests, the best sample, prepared by mixing different functional co-precursors, was selected and its behavior was studied under different temperatures. For this material, the adsorption performance at 20 °C is dependent on the cation, ranging from 56 mg·g⁻¹ for copper to 172 mg·g⁻¹ for lead.

Statistical analyses on effective removal of cadmium and hexavalent chromium ions by multiwall carbon nanotubes (MWCNTs)

In this work, multiwall carbon nanotubes (MWCNTs) developed from cobalt-ferrite catalyst on activated carbon (from castor seed), was used as an adsorbent for the removal of cadmium and hexavalent chromium ions. The effectiveness of the adsorbent for the uptake of Cd(II) and Cr(VI)ions from aqueous solution was investigated in a process batch adsorption study. The developed activated carbon and MWCNTs were characterized by Brunauer-Emmett-Teller (BET) surface area analysis, Fourier Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) for the determination of surface area, functional group, and surface morphology, respectively. The BET surface area of activated carbon and developed adsorbent from Co–Fe/AC was 230.24 and 372.42 m²/g, respectively. The operational parameters evaluated on the adsorption efficiency were solution pH, temperature, adsorbent dosage initial metal ions concentration, and contact time. The adsorption of Cd(II) and Cr(VI) were found to have attained equilibrium positions in 60 min for the concentration range tested, respectively. The four linearized adsorption isotherm models; Langmuir, Freundlich, Temkin and Dubinin Radushkevich (D-R) tested, when compared, revealed that Langmuir isotherm fitted well to the experimental data judging from the higher correlation coefficient values (R²) and lower values of the error functions (chi-square (χ²), the sum of square error (ERRSQ/SSE) and the sum of absolute error (EABS))with monolayer adsorption capacities of 404.858 and 243.902 mg/g for Cd(II) and Cr(VI) ions, respectively. Adsorption kinetic models investigated by pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion showed the conformity of pseudo-second-order model to the process adsorption as informed by the higher values R² and Adj, R², maximum log-likelihood and smaller ERRSQ/SSE, χ², Akaike information criterion (AIC), Bayesian information criterion (BIC), and Hannan-Quinn information criterion (HQIC). The intraparticle diffusion model plots indicated that intraparticle diffusion was not the only rate-limiting step. Thermodynamic adsorption parameters (ΔH^o and ΔG^o, ΔS^o) showed that the adsorption of Cd (II) and Cr (VI) ions was spontaneous, endothermic, and increased in randomness between the adsorbate-adsorbent. The mean adsorption energy (E), the heat of adsorption (ΔH^o), and activation energy (E_a) values, revealed the adsorption mechanism of Cd(II) and Cr(VI) onto MWCNTs as a combination of chemical and physical adsorption but dominated more by chemical adsorption.

Assessment of heavy metal pollution from anthropogenic activities and remediation strategies: A review

Heavy metal pollution is a nefarious issue with implications for life. Heavy metals are natural occurring elements, having both natural and anthropogenic sources. The latter are however the most significant, releasing greater amounts of these pollutants in more toxic and mobile forms. Their chemistry and dynamics in the ecosystems are presented, and the relation to the pollution problematic thereof is discussed. The concentration of heavy metals in several sites, assessed in water, soil and sediment samples, affected by different pollution sources are reviewed. These evidence how human activities impact natural media and how the pollution spreads. The pollution in each media is assessed by the concentration relative to drinking and irrigation water guidelines, and by the geoaccumulation index of soils and sediments. It is found that ore extraction and processing and metallurgical industries stand atop the most polluting sources. Given the dynamics of heavy metal cations and that, most of these are released in liquid effluents, wastewater treatment techniques for the removal of heavy metals are also surveyed and critically discussed. Economic viability at a large municipal scale and the ability to comply with strict regulations are the determining factors in the selection of these techniques. A critical discussion on the viability of such techniques is made, reviewing some literature studies and commenting on their applicability on the previously found polluted media.

A novel carboxylic-functional indole-based aerogel for highly effective removal of heavy metals from aqueous solution via synergistic effects of face-point and point-point interactions

A new type of carboxylic-functional indole-based aerogel (CHIFA) has been successfully prepared via a facile sol–gel technology, which possessed a highly effective removal of heavy metals from aqueous solution through the synergistic effects of face–point and point–point interactions.

A new type of carboxylic-functional indole-based aerogel (CHIFA) has been successfully prepared, which possessed highly effective removal of heavy metals from aqueous solution through the synergistic effects of face–point and point–point interactions.

Adsorption behavior of engineered carbons and carbon nanomaterials for metal endocrine disruptors: Experiments and theoretical calculation

Adsorption behaviors and mechanisms of metal endocrine disruptors (Pb²⁺, Cd²⁺, and Hg²⁺) by pyrogenic carbonaceous materials including engineered carbons (biochar and activated carbon) and carbon nanomaterials (multi-walled carbon nanotubes and graphene oxide) have been investigated by experimental and density functional theory (DFT) studies. The adsorption isotherms of metal endocrine disruptors on carbonaceous materials were better fitted by Langmuir models. The adsorption capacities were in the order as follows: GO > BC600 > BC300 > CNT > AC for Pb²⁺, GO > BC300 > AC > BC600 > CNT for Cd²⁺, and GO > BC300 ≥ AC > CNT > BC600 for Hg²⁺, respectively. The DFT-computed binding energy (kcal/mol) of different oxygen-containing functional groups with metal endocrine disruptors followed the orders: (ⅰ) CMCOCPb (-136.70) > CM-COO^--Pb (-91.58) > CMCOPb (-33.57) > CMOHPb (-4.69), (ⅱ) CM-COO^--Cd (-45.91) > CMCOCCd (-4.49) > CMOHCd (-3.68) > CMCOCd (1.08), (ⅲ) CM-COO^--Hg (-25.51) > CMCOCHg (-3.58) > CMOHHg (-0.63) > CMCOHg (0.23). And COC has the highest binding energy for Pb²⁺, whereas COC has much lower binding energy for Cd²⁺ and Hg²⁺. Comprehensively considering DFT calculations, competitive adsorption results and the cost analysis, this work may provide insights into the design of selective adsorbent for specific contaminant.

Efficient adsorption of multiple heavy metals with tailored silica aerogel-like materials

Recently developed tailored adsorbents for heavy metal uptake are studied in batch tests with Cu, Pb, Cd, Ni, Cr and Zn, in order to decontaminate polluted environments where these heavy metals are found in solution - water courses and groundwater. The adsorbents feature mercapto or amine-mercapto groups that are capable of complexating the cations. Through the use of equilibrium tests it is found that a remarkably high heavy metal uptake is obtained for all metals (ranging from 84 to 140 mg/g). These uptake values are quite impressive when compared to other adsorbents reported in the literature, which is also due to the double functionalization present in one of the adsorbents. For the best adsorbent, adsorption capacities followed the order Cu(II) > Pb(II) > Zn(II) > Cr(III) > Cd(II) > Ni(II). With these adsorbents, the removal process was fast with most of the metals being removed in less than 1 h. Competitive sorption tests were performed in tertiary mixtures that were based on real world polluted sites. It was found that although competitive sorption occurs, affecting the individual removal of each metal, all the cations in solution still interact with the adsorbent, achieving removal values that make this type of material very interesting for its proposed application.

A Comparison of Electrochemical Performance of Carbon Aerogels with Adsorption Metal Ions for Super Capacitors

Environmental problems caused by metal ions have caused widespread concern in recent years. In this work, carbon aerogels (CAs) adsorbing different metal ions were prepared. The adsorption performance and kinetics of metal ions (Cu(II), Cr(VI), and Fe(III)) on carbon aerogels were systematically investigated. The results indicated that the maximum adsorption capacity of Cu(II) was 424 mg·g⁻¹ in 600 mg·L⁻¹ copper solution. Adsorption performances of Cu(II), Cr(VI), and Fe(III) on CAs well fitted with a pseudo-second-order kinetic model. The structures and morphologies of metal-containing samples were characterized by scanning electron micrographs (SEM), Energy Dispersive Spectrometer (EDS), transmission electron microscope (TEM), and X-ray diffraction (XRD). The results demonstrated that the texture and electrochemical performance of CAs adsorbing metal ions exhibited a clear change. The specific surface area of CAs for adsorbing copper ions was 450 m²·g⁻¹ and they showed a small average pore diameter (7.16 nm). Furthermore, CAs adsorbing metals could be used for the super capacitor. The specific capacitance of CAs adsorbing copper ions could reach 255 F·g⁻¹ at a current density of 1.0 A·g⁻¹. The CA-Cu electrode materials exhibited excellent reversibility with a cycling efficiency of 97% after 5000 cycles.

Zero-valent iron supported on nitrogen-doped carbon xerogel as catalysts for the oxidation of phenol by fenton-like system

Nitrogen-free and nitrogen-doped carbon xerogel materials, from urea and melamine precursors, were prepared at different pH and evaluated as adsorbents/catalysts in the removal of phenol. Then, zero-valent iron (ZVI) was supported on these carbon xerogel materials and its activity was again evaluated for phenol removal by adsorption and catalytic wet peroxide oxidation (CWPO). The prepared samples were characterized by N₂ adsorption at -196°C, pH at the point of zero charge (pH_PZC) and elemental analysis. The textural properties of the N-free and N-doped carbon xerogels are strongly influenced by pH of the preparation solution and precursor used. The presence of ZVI on all carbon xerogel supports improved the phenol removal efficiency. ZVI supported on urea- and melamine-doped carbon xerogels show a good performance, reaching above 87% phenol conversion after 60 min of CWPO. On the contrary, pure adsorption and CWPO using the same materials without the presence of ZVI gives low phenol removal efficiency. A correlation was found between the activity of ZVI catalysts in CWPO and the N-content of the supports.

Multifunctional Carbon Aerogels Derived by Sol-Gel Process of Natural Polysaccharides of Different Botanical Origin

In this manuscript, we describe the results of our recent studies on carbon aerogels derived from natural starches. A facile method for the fabrication of carbon aerogels is presented. Moreover, the complete analysis of the carbonization process of different starch aerogels (potato, maize, and rice) was performed using thermogravimetric studies combined with a detailed analysis of evolved decomposition products. The prepared carbon aerogels were studied in terms of their morphology and electrical properties to relate the origin of starch precursor with final properties of carbon materials. The obtained results confirmed the differences in carbon aerogels' morphology, especially in materials' specific surface areas, depending on the botanical origin of precursors. The electrical conductivity measurements suggest that carbon aerogels with the best electrical properties can be obtained from potato starch.

Heavy metals in Iberian soils: Removal by current adsorbents/amendments and prospective for aerogels

Heavy metals are dangerous pollutants that in spite of occurring naturally are released in major amounts to the environment due to anthropogenic activities. After being released in the environment, the heavy metals end up in the soils where they accumulate as they do not degrade, adversely affecting the biota. Because of the dynamic equilibria between soil constituents, the heavy metals may be present in different phases such as the solid phase (immobilized contaminants) or dissolved in soil solution. The latter form is the most dangerous because the ions are mobile, can leach and be absorbed by living organisms. Different methods for the decontamination of polluted soils have been proposed and they make use of two different approaches: mobilizing the heavy metals, which allows their removal from soil, or immobilization that maintains the metal concentrations in soils but keeps them in an inert form due to mechanisms like precipitation, complexation or adsorption. Mobilization of the heavy metals is known to cause leaching and increase plant uptake, so this treatment can cause greater problems. Aerogels are incredible nanostructured, lightweight materials with high surface area and tailorable surface chemistry. Their application in environmental cleaning has been increasing in recent years and very promising results have been obtained. The functionalization of the aerogels can give them the ability to interact with heavy metals, retaining the latter via strong adsorptive interactions. Thus, this review surveys the existing literature for remediation of soils using an immobilization approach, i.e. with soil amendments that increase the soil sorption/retention capacity for heavy metals. The considered framework was a set of heavy metals with relevance in polluted Iberian soils, namely Cd, Cr, Cu, Ni, Pb and Zn. Moreover, other adsorbents, especially aerogels, have been used for the removal of these contaminants from aqueous media; because groundwater and soil solution have dynamic equilibria with the soil solid phase, these works allowed to draw conclusions and perspectives for the use of aerogels not only as adsorbents in aqueous media but also as amendments for the remediation of heavy metal polluted soils.

Oxygen-Content-Controllable Graphene Oxide from Electron-Beam-Irradiated Graphite: Synthesis, Characterization, and Removal of Aqueous Lead [Pb(II)]

A high-energy electron beam was applied to irradiate graphite for the preparation of graphene oxide (GO) with a controllable oxygen content. The obtained GO sheets were analyzed with various characterization tools. The results revealed that the oxygen-containing groups of GO increased with increasing irradiation dosages. Hence, oxygen-content-controllable synthesis of GO can be realized by changing the irradiation dosages. The GO sheets with different irradiation dosages were then used to adsorb aqueous Pb(II). The effects of contact time, pH, initial lead ion concentration, and ionic strength on Pb(II) sorption onto different GO sheets were examined. The sorption process was found to be very fast (completed within 20 min) at pH 5.0. Except ionic strength, which showed no/little effect on lead sorption, the other factors affected the sorption of aqueous Pb(II) onto GO. The maximum Pb(II) sorption capacities of GO increased with irradiation dosages, confirming that electron-beam irradiation was an effective way to increase the oxygen content of GO. These results suggested that irradiated GO with a controllable oxygen content is a promising nanomaterial for environmental cleanup, particularly for the treatment of cationic metal ions, such as Pb(II).

Isotherm, kinetic, and thermodynamic studies on Hg(II) adsorption from aqueous solution by silica- multiwall carbon nanotubes

Silica combined with 2% multiwall carbon nanotubes (SiO2-CNT) was synthesized and characterized. Its sorption efficacy was investigated for the Hg(II) removal from an aqueous solution. The effect of pH on the percentage removal by the prepared material was examined in the range from 3 to 7. The adsorption kinetics were well fitted by using a pseudo-second-order model at various initial Hg(II) concentrations with R (2) of >0.99. The experimental data were plotted using the interparticle diffusion model, which indicated that the interparticle diffusion is not the only rate-limiting step. The data is well described by the Freundlich isotherm equation. The activation energy (Ea) for adsorption was 12.7 kJ mol(-1), indicating the process is to be physisorption. Consistent with an endothermic process, an increase in the temperature resulted in increasing mercury removal with a ∆H(o) of 13.3 kJ/mol and a ∆S(o) 67.5 J/mol K. The experimental results demonstrate that the combining of silica and nanotubes is a promising alternative material, which can be used to remove the mercury from wastewaters.

Carbon-Based Sorbents with Three-Dimensional Architectures for Water Remediation

Over the past decade, carbon-based 3D architectures have received increasing attention in science and technology due to their fascinating properties, such as a large surface area, macroscopic bulky shape, and interconnected porous structures, enabling them to be one of the most promising materials for water remediation. This review summarizes the recent development in design, preparation, and applications of carbon-based 3D architectures derived from carbon nanotubes, graphene, biomass, or synthetic polymers for water treatment. After a brief introduction of these materials and their synthetic strategies, their applications in water treatment, such as the removal of oils/organics, ions, and dyes, are summarized. Finally, future perspective directions for this promising field are also discussed.

Competitive adsorption of metals onto magnetic graphene oxide: comparison with other carbonaceous adsorbents

Competitive adsorption isotherms of Cu(II), Pb(II), and Cd(II) were examined on a magnetic graphene oxide (GO), multiwalled carbon nanotubes (MWCNTs), and powered activated carbon (PAC). A series of analyses confirmed the successful synthesis of the magnetic GO based on a simple ultrasonification method. Irrespective of the adsorbents, the adsorption was highly dependent on pH, and the adsorption was well described by the Langmuir isotherm model. The maximum adsorption capacities of the adsorbents were generally higher in the order of Pb(II) > Cu(II) > Cd(II), which is the same as the degree of the electronegativity and the hydrated radius of the metals, suggesting that the metal adsorption may be governed by an ion exchange between positively charged metals and negatively charged surfaces, as well as diffusion of metals into the surface layer. The adsorption of each metal was mostly lower for multi- versus single-metal systems. The antagonistic effects were influenced by solution pH as well as the type of metals, and they were higher in the order of the magnetic GO > MWCNT > PAC. Dissolved HS played a greater role than HS adsorbed onto the adsorbents, competing with the adsorption sites for metal complexation.

Aluminosilicate-based adsorbent in equimolar and non-equimolar binary-component heavy metal removal systems

Cadmium (Cd) and lead (Pb) are toxic heavy metals commonly used in various industries. The simultaneous presence of these metals in wastewater amplifies the toxicity of wastewater and the complexity of the treatment process. This study has investigated the selective behavior of an aluminosilicate-based mesoporous adsorbent. It has been demonstrated that when equimolar quantities of the metals are present in wastewater, the adsorbent uptakes the Pb²⁺ ions selectively. This has been attributed to the higher electronegativity value of Pb²⁺ compared to Cd²⁺ which can be more readily adsorbed on the adsorbent surface, displacing the Cd²⁺ ions. The selectivity can be advantageous when the objective is the separation and reuse of the metals besides wastewater treatment. In non-equimolar solutions, a complete selectivity can be observed up to a threshold Pb²⁺ molar ratio of 30%. Below this threshold value, the Cd²⁺ and Pb²⁺ ions are uptaken simultaneously due to the abundance of Cd²⁺ ions and the availability of adsorption sites at very low Pb²⁺ molar ratios. Moreover, the total adsorption capacities of the adsorbent for the multi-component system have been shown to be in the same range as the single-component system for each metal ion which can be of high value for industrial applications.

Lead sorption performance on active silica derived from fly ash

The object of this study was to estimate the sorption property of active silica derived from fly ash after separation of silica and aluminum. The specific surface area of active silica enlarged to 115 m(2)/g was compared with the original fly ash (4 m(2)/g). Field emission scanning electron microscopy displayed the active silica, which looked like a honeycomb or curly layer with many lamellae that formed many mesopores. The uptake kinetics indicated that the residual concentration of Pb(2+) in the aqueous solution decreased rapidly from the initial 1.25 mg/L to less than 10 μg/L within 45 min. The removal efficiency of Pb(2+) on active silica was pH dependent. The increase in pH value promoted Pb(2+) removal because the negative surface provided more electrostatic attraction sites. A stepwise non-linear isotherm was obtained because the lamellae of active silica provided a heterogeneous surface with various kinds of active sites. The maximum sorption amount of Pb on active silica was more than 90 mg/g, which was better than some pristine-activated carbon.

Cork stoppers as an effective sorbent for water treatment: the removal of mercury at environmentally relevant concentrations and conditions

The technical feasibility of using stopper-derived cork as an effective biosorbent towards bivalent mercury at environmentally relevant concentrations and conditions was evaluated in this study. Only 25 mg/L of cork powder was able to achieve 94 % of mercury removal for an initial mercury concentration of 500 μg/L. It was found that under the conditions tested, the efficiency of mercury removal expressed as equilibrium removal percentage does not depend on the amount of cork or its particle size, but is very sensitive to initial metal concentration, with higher removal efficiencies at higher initial concentrations. Ion exchange was identified as one of the mechanisms involved in the sorption of Hg onto cork in the absence of ionic competition. Under ionic competition, stopper-derived cork showed to be extremely effective and selective for mercury in binary mixtures, while in complex matrices like seawater, moderate inhibition of the sorption process was observed, attributed to a change in mercury speciation. The loadings achieved are similar to the majority of literature values found for other biosorbents and for other metals, suggesting that cork stoppers can be recycled as an effective biosorbent for water treatment. However, the most interesting result is that equilibrium data show a very rare behaviour, with the isotherm presenting an almost square convex shape to the concentration axis, with an infinite slope for an Hg concentration in solution around 25 μg/L.