Cr(VI) reduction and immobilization by novel carbonaceous modified magnetic Fe3O4/halloysite nanohybrid

Adsorption and catalytic reduction of hexavalent chromium based on nanomaterials: A review on metal, metallic oxide, metallic sulfide and carbon-based catalyst

Chromium (Cr) is widely recognized as a significant environmental contaminant and a major contributor to global pollution. As a result, there is a strong emphasis on developing effective methods for the removal and reduction of Cr(VI). This review examines various applications of nanomaterial catalysts, including metallic oxides, metals, metallic sulfides, and carbon-based materials. These materials encompass naturally occurring substances, synthetically produced compounds, and artificially modified forms, all of which typically exhibit favorable adsorption properties and catalytic activity. We systematically summarize the mechanisms of adsorption and catalytic reduction associated with these nanomaterials, including photocatalysis, electrocatalysis, and direct catalysis. Finally, we explore the future directions and prospects of nanomaterials in environmental remediation, highlighting the key challenges that must be addressed in this field.

Optimization of chromium (VI) reduction in aqueous solution using magnetic Fe3O4 sludge resulting from electrocoagulation process

The reuse of electro-coagulated sludge as an adsorbent for Cr(VI) ion reduction was investigated in this study. Electro-coagulated sludge was obtained during the removal of citric acid wastewater by the electrocoagulation process. The following parameters were optimized for Cr(VI) reduction: pH (5-7), initial Cr(VI) concentration (10-50 mg/L), contact time (10-45 min), and adsorbent dosage (0.5-1.5 g/L). Cr(VI) reduction optimization reduction experimental sets were designed using response surface design. Cr(VI) reduction optimization results 97.0% removal efficiency and 15.1 mg/g adsorption capacity were obtained at pH 5.0, 1.5 g/L electro-coagulated Fe3O4 sludge, 10 mg/L initial Cr(VI) concentration and 45 min reaction time. According to the isotherm results, the experimental data are compatible with the Freundlich isotherm model, and since it is defined by the pseudo-second order model emphasizes that the driving forces of the Cr(VI) reduction process are rapid transfer of Cr(VI) to the adsorbent surface. The reusability of the adsorbent was investigated and Cr(VI) reduction was achieved at a high rate even in the 5th cycle. All these results clearly show that electro-coagulated Fe3O4 sludge is an effective, inexpensive adsorbent for Cr(VI) removal from wastewater.

Myco-remediation of chromium heavy metal from industrial wastewater: A review

Chromium a heavy metal present in the effluent of the industries causes accumulation of toxicity in water. Chromium commonly has Cr (III) and Cr (VI), two oxidation states, in which hexavalent form causes more health issues to human, other species and environment. The increased anthropogenic effects, especially tannery industrial effluent contributes the higher percentage of chromium accumulation. Removal of heavy metal can be attributed to many aspects, conventionally the physio-chemical methods which superseded by biological means of remediation. Chromium resistant microbes can be used to remove metal ions of chromium from the effluent, as this can be considered an eco-friendly approach. The microbial accession of nanoparticles synthesis is being focused, due to its accuracy and specificity in results. Mycoremediation grabbed attention as fungal absorbance efficiency and the surface-mechanism of heavy metal ions correlates each other. Current study in-depth indulges the base to core mechanism of mycoremediation of chromium ions from different effluents. Fungal-assisted mechanism of chromium ions have insists to be fewer, which may gain attention by enhancing the methodology of removal of chromium ions. This study focuses on improvement of fungal strain and pave-way, to improvise the study with immobilization technique which renders usage of the adsorbents redundant usage and applications, substantially with the low-cost polymeric material alginate is given more importance for immobilization technique. Alginate apart from low-cost adsorbent, is an excellent support for fungal producing nanoparticles which would provide wide-cast and an extraordinary adsorbent material.

Enhanced Treatment of Antimony Mine Wastewater by Sulfidated Micro Zerovalent Iron (S-mZVI)

Commercial micron zerovalent iron (mZVI) and sulfur were used to prepare sulfidated micro zerovalent iron (S-mZVI) through ball milling. The corrosion potentials of mZVI and S-mZVI were -0.01 and -0.37 V, respectively, indicating S-mZVI possessed a stronger electron-donating ability. The practical antimony mine wastewater (C0(Sb(V)) = 3.8296 mg/L, pH = 8.29) was treated. If meeting the national discharge standard of 5 μg/L, 2.0 g/L mZVI and 1.6 g/L S-mZVI were required within 120 min. Passing N2 or reducing wastewater pH enhanced the treatment of Sb(V) by S-mZVI, in which the wastewater acidification was more effective. Once the wastewater pH was adjusted to 3.00, only 0.7 g/L S-mZVI and 40 min long time were needed to achieve the emission below 5 μg/L. Even S-mZVI underwent four cycles, and the final concentration of Sb(V) was as low as 4.67 μg/L. As the pHzpc value was 4.09 and the corrosion potential was -0.56 V at pH 3.0, the electron-donating ability of S-mZVI as well as the electrostatic attraction between the surface of S-mZVI and Sb(V) increased. Sulfidation of mZVI and then application under the acid condition significantly improved the treatment efficiency of Sb(V).

Ultrafast removal of toxic Cr(VI) by the marine bacterium Vibrio natriegens

The fastest-growing microbe Vibrio natriegens is an excellent platform for bioproduction processes. Until now, this marine bacterium has not been examined for bioremediation applications, where the production of substantial amounts of biomass would be beneficial. V. natriegens can perform extracellular electron transfer (EET) to Fe(III) via a single porin-cytochrome circuit conserved in Vibrionaceae. Electroactive microbes capable of EET to Fe(III) usually also reduce toxic metals such as carcinogenic Cr(VI), which is converted to Cr(III), thus decreasing its toxicity and mobility. Here, the performance of V. natriegens was explored for the bioremediation of Cr(VI). At a density of 100 mg/mL, V. natriegens removed 5-20 mg/L Cr(VI) within 30 s and 100 mg/L Cr(VI) within 10 min. In comparison, the model bacterium Escherichia coli grown to a comparable cell density removed Cr(VI) 36 times slower. To eliminate Cr(VI), V. natriegens had to be metabolically active, and functional outer-membrane c-type cytochromes were required. At the end of the Cr(VI) removal process, V. natriegens had reduced all of it into Cr(III) while adsorbing more than half of the metallic ions. These results demonstrate that V. natriegens, with its fast metabolism, is a viable option for the rapid treatment of aqueous pollution with Cr.

Elimination of hazardous Se(IV) through adsorption-coupled reduction by iron nanoparticles embedded on mesopores of chitin obtained from waste shrimp shells

Selenium is an essential nutrient for biological function. However, there is a detrimental effect on the aquatic environment associated with higher concentrations of > 40 µg/L. The utilization of waste shrimp shells for the removal of high-concentrated selenium from wastewater is a commendable strategy in both the pollution control and waste management sectors. In the present study, a chitin-iron polymer complex hybrid material (Fe@SHC) was prepared from shrimp shell-derived hydrochar (SHC), and the synthesized composite was successfully employed to uptake selenium from wastewater. The highest removal performance of 79.18 mg/g was attained by Fe@SHC, whereas the capacity of SHC was 15.30 mg/g. It was found that the calcium content of Fe@SHC (1.98%) was lower than that of SHC (25.20%) and pHzpc of Fe@SHC was extended to 7.78 compared with that of SHC (2.00). The abundance of protonated hydroxyl (-OH2+) and amine (-NH3+) functional groups that developed through the iron co-precipitations resulted in the improved adsorption performance of Fe@SHC. XPS analysis demonstrated that the captured Se(IV) species were converted into less hazardous Se(0), which is accompanied by the electron transfer with both N-C = O (acetyl amine) and -NH2 (amine) functional groups. Adsorption kinetics disclosed that the adsorption process was governed by chemical sorption, and the Sips isotherm model provided the most accurate description of the isotherm equilibrium. This study proposed an inexpensive and environmentally friendly method for effective decontamination of Se from wastewater.

Efficient Removal of Antimony(V) from Antimony Mine Wastewater by Micrometer Zero-Valent Iron

This paper investigates the effectiveness of two commercial micron zero-valent irons (mZVIs) in removing Sb(V) from antimony mine wastewater. The wastewater contains a range of complex components and heavy metal ions, including As(V), which can impact the removal efficiency of mZVI. The study aims to provide insights into actual working conditions and focuses on influencing factors and standard conditions. The results demonstrate that mZVI can reduce Sb(V) concentration in the mine wastewater from 3875.7 μg/L to below the drinking water standard of 5 μg/L within 2 h. Adding a small amount of mZVI every 30 min helps to maintain a high removal rate. The study confirms the existence of a reduction reaction by changing the atmospheric conditions of the reaction, and the addition of 1,10-phenanthroline highlights the important role of active Fe(II) in the adsorption and removal of Sb(V) by mZVI. Additionally, the paper presents an innovative experimental method of acid treatment followed by alkali treatment, which proves the interfacial reaction between mZVI and Sb(V). Overall, the study demonstrates that the removal of Sb(V) by mZVI entails a dual function of reduction and adsorption, highlighting the potential of mZVI in repairing Sb(V) in antimony mine wastewater.

A review on chromium health hazards and molecular mechanism of chromium bioremediation

Living beings have been devastated by environmental pollution, which has reached its peak. The disastrous pollution of the environment is in large part due to industrial wastes containing toxic pollutants. The widespread use of chromium (Cr (III)/Cr (VI)) in industries, especially tanneries, makes it one of the most dangerous environmental pollutants. Chromium pollution is widespread due to ineffective treatment methods. Bioremediation of chromium (Cr) using bacteria is very thoughtful due to its eco-friendly and cost-effective outcome. In order to counter chromium toxicity, bacteria have numerous mechanisms, such as the ability to absorb, reduce, efflux, or accumulate the metal. In this review article, we focused on chromium toxicity on human and environmental health as well as its bioremediation mechanism.

A comparative study of confinement and layer modified Zr-based MOFs for the efficient removal of Cr(vi) from wastewater

The GO- and SBA-15-modified UiO-66 adsorbents were developed for removal of trace Cr(vi) from wastewater and investigated to understand the effect of different hybrid ways on the absorption activity and reaction mechanism. The characterization results confirmed that the UiO-66 nanoparticles could be encapsulated by the SBA-15 matrix and anchored onto GO layers. Due to different exposure modes, the adsorption results showed that the GO-modified UiO-66 had better Cr(vi) trapping performance with the maximum removal efficiency of 97% within 3 min, presenting one of the most efficient Cr(vi) removal materials. Kinetic models showed that the adsorption process included fast, exothermic, spontaneous and pseudo-secondary chemical adsorption. By comparison with the Freundlich and Temkin model, the results revealed that the adsorption process of Cr(vi) by UiO-66@SBA-15 involved some multi-layer physical adsorption, while Cr(vi) was adsorbed onto the UiO-66@GO surface. The mechanism study also found that the fixation of Cr was the chemical action of UiO-66 on GO. Additionally, the encapsulated way increases the protection of UiO-55 from surface damage. In all, both hard-core-shell UiO-66@SBA-15 and piece UiO-66@Go increase the absorption activity of Cr(vi), but the different hybrid ways lead to different activities, absorption processes and regeneration abilities.

One-pot synthesis of siliceous ferrihydrite - coated halloysite nanorods in alkaline medium: Structure, properties and cadmium adsorption performance

The application of amorphous ferrihydrite (Fh) for Cd(II) removal is restricted by its unstable and easily transformable nature. Although doping with silicates stabilized ferrihydrite, its product siliceous ferrihydrite (SiFh) again suffered from the disadvantage of spontaneous agglomeration. Herein, ferrihydrite was hybridized with halloysite nanotubes (HNTs) to prepare a novel siliceous ferrihydrite - coated halloysite nanorods (SiFh@HNTs) in alkaline medium, to break through the current barriers. The characterization results showed that SiFh@HNTs could simultaneously overcome the defects of easy phase transformation of ferrihydrite and easy aggregation of SiFh nanoparticles (NPs). Meanwhile, the optimal SiFh@HNT₄₀ with halloysite content of 40 % formed a well-developed mesoporous structure and exhibited the desired surface properties: a high specific surface area of 303.4 m²/g, an isoelectric point as low as pH_iep = 4.5, and rich functional Fe - OH groups. The formation mechanism of such excellent sturcture-properties of SiFh@HNT₄₀ were mainly attributed to two factors: the generation of smaller (∼5 nm) SiFh NPs induced by the integration of halloysite-derived SiO₄^4- into ferrihydrite, and the dispersion of SiFh NPs on clay nanotubes. Furthermore, the adsorption capacity of SiFh@HNT₄₀ for Cd(II) was up to 137.8 mg/g at 30 °C and pH 6, which was much higher than that of aggregated ferrihydrite (11.2 mg/g), halloysite (18.8 mg/g) and goethite (49.4 mg/g). The adsorption thermodynamics study revealed the adsorption of Cd(II) on SiFh@HNT₄₀ was clearly chemisorption with a (ΔH_ads)_q of 43.3 kJ/mol. Characterization results of XPS and FTIR confirmed that the rich Fe - OH groups on SiFh@HNT₄₀ was the main adsorption sites, and Cd(II) was specifically adsorbed by inner-sphere surface complexation. In addition, SiFh@HNT₄₀ had application potential in the mixed-metal wastewaters treatment. Cyclic regeneration experiments showed that SiFh@HNT₄₀ had good regeneration performance and could be reused many times.

Synthesis and Characterization of Carvedilol-Etched Halloysite Nanotubes Composites with Enhanced Drug Solubility and Dissolution Rate

Carvedilol is a poorly water-soluble drug employed to treat chronic heart failure. In this study, we synthesize new carvedilol-etched halloysite nanotubes (HNTs) composites to enhance solubility and dissolution rate. The simple and feasible impregnation method is used for carvedilol loading (30-37% weight). Both the etched HNTs (acidic HCl and H₂SO₄ and alkaline NaOH treatments) and the carvedilol-loaded samples are characterized by various techniques (XRPD, FT-IR, solid-state NMR, SEM, TEM, DSC, and specific surface area). The etching and loading processes do not induce structural changes. The drug and carrier particles are in intimate contact and their morphology is preserved, as demonstrated by TEM images. The ²⁷Al and ¹³C solid-state NMR and FT-IR findings show that carvedilol interactions involve the external siloxane surface, especially the aliphatic carbons, the functional groups, and, by inductive effect, the adjacent aromatic carbons. All the carvedilol-halloysite composites display enhanced dissolution rate, wettability, and solubility, as compared to carvedilol. The best performances are obtained for the carvedilol-halloysite system based on HNTs etched with HCl 8M, which exhibits the highest value of specific surface area (91 m² g^-1). The composites make the drug dissolution independent of the environmental conditions of the gastrointestinal tract and its absorption less variable, more predictable, and independent from the pH of the medium.

Recent advances in new generation nanocomposite materials for adsorption of pharmaceuticals from aqueous environment

With rapid increase in the human population, a large amount of wastewater is generated every year. The availability of fresh water is decreasing at an alarming rate due to rapid industrialization and agricultural development. Pharmaceutical drugs which are credited for improving standards of life worldwide have emerged as major water contaminants, raising global concern about their potential risk to human health and environment. The presence of pharmaceutical compounds is detected in surface water (sea, river, lakes, etc.), groundwater, effluents from municipal, hospitals, and wastewater treatment plants, and even in drinking water. Efficient removal of pharmaceutical pollutants still remains a challenging task. Many techniques, including photodegradation, photocatalysis, oxidation, reverse osmosis, biodegradation, nanofiltration, adsorption, etc., have been used for the remediation of wastewater. Adsorption of pharmaceutical compounds on nanoadsorbents, as a low-cost and feasible technology, has gained immense popularity for wastewater treatment over the last decade. Adsorption techniques can be integrated with wastewater treatment plants to achieve efficient removal on an industrial level. Herein, we review the literature on the remediation techniques used for the pharmaceutical waste treatment using carbon nanotubes, metal oxides, nanoclay, and new-generation MXenes via adsorption. These materials show excellent adsorptive properties owing to their high surface area, low cost, high porosity, easy functionalization, and high surface reactivity. The adsorption mechanism of the nanoadsorbents and their reusability as a factor of sustainability have also been included in the review. The factors affecting the adsorption, including pH, the concentration of adsorbate, ionic strength, and adsorbate dose, have also been discussed.

Fe3O4-Halloysite Nanotube Composites as Sustainable Adsorbents: Efficiency in Ofloxacin Removal from Polluted Waters and Ecotoxicity

The present work aimed at decorating halloysite nanotubes (HNT) with magnetic Fe₃O₄ nanoparticles through different synthetic routes (co-precipitation, hydrothermal, and sol-gel) to test the efficiency of three magnetic composites (HNT/Fe₃O₄) to remove the antibiotic ofloxacin (OFL) from waters. The chemical-physical features of the obtained materials were characterized through the application of diverse techniques (XRPD, FT-IR spectroscopy, SEM, EDS, and TEM microscopy, thermogravimetric analysis, and magnetization measurements), while ecotoxicity was assessed through a standard test on the freshwater organism Daphnia magna. Independently of the synthesis procedure, the magnetic composites were successfully obtained. The Fe₃O₄ is nanometric (about 10 nm) and the weight percentage is sample-dependent. It decorates the HNT's surface and also forms aggregates linking the nanotubes in Fe₃O₄-rich samples. Thermodynamic and kinetic experiments showed different adsorption capacities of OFL, ranging from 23 to 45 mg g^-1. The kinetic process occurred within a few minutes, independently of the composite. The capability of the three HNT/Fe₃O₄ in removing the OFL was confirmed under realistic conditions, when OFL was added to tap, river, and effluent waters at µg L^-1 concentration. No acute toxicity of the composites was observed on freshwater organisms. Despite the good results obtained for all the composites, the sample by co-precipitation is the most performant as it: (i) is easily magnetically separated from the media after the use; (ii) does not undergo any degradation after three adsorption cycles; (iii) is synthetized through a low-cost procedure. These features make this material an excellent candidate for removal of OFL from water.

CT/MR detectable magnetic microspheres for self-regulating temperature hyperthermia and transcatheter arterial chemoembolization

The embolic microspheres containing magnetic nanoparticles and anti-tumor drugs have been proposed for transcatheter arterial chemoembolization (TACE). However, this technique still suffers the poor control of hyperthermia temperature and drug release behavior. Herein, the magnetic microspheres based on low Curie temperature superparamagnetic iron oxide nanoparticles are developed by emulsification cross-linking of gelatin, genipin, and sodium alginate. The magnetic microspheres can self-regulate the hyperthermia temperature at around 50°C, un-necessitating any temperature control facilities. The magnetic microspheres can load doxorubicin hydrochloride and the loaded drug can be released in a controllable way by using an alternating magnetic field. Cytocompatibility and hemolysis evaluations confirm the non-cytotoxicity and negligible hemolysis of magnetic microspheres. The embolization model on rabbit auricular artery demonstrates that the magnetic microspheres can occlude the targeted blood vessel and are visualized under CT/MR imaging. All these findings suggest that the prepared magnetic microspheres could be used as the embolic agent in TACE. STATEMENT OF SIGNIFICANCE: The existing magnetic embolic microspheres suffer the poor control of hyperthermia temperature and drug release behavior in TACE. In this work, we developed the magnetic embolic microspheres based on superparamagnetic iron oxide nanoparticles with a low Curie temperature. Upon the application of alternating magnetic field, the embolic microspheres can self-regulate the hyperthermia temperature at around 50°C and the drug loaded in the microspheres can be released in a somewhat controllable manner. The embolic microspheres are also detectable to both CT and MR. These characteristics enable the developed microspheres to simultaneously realize self-regulating temperature hyperthermia, on-demand drug release, embolism, and CT/MR imaging.

Advances in the application of immobilized enzyme for the remediation of hazardous pollutant: A review

Nowadays, ecofriendly, low-cost, and sustainable alternatives techniques have been focused on the effective removal of hazardous pollutants from the water streams. In this context, enzyme immobilization seems to be of specific interest to several researchers to develop novel, effective, greener, and hybrid strategies for the removal of toxic contaminants. Immobilization is a biotechnological tool, anchoring the enzymes on support material to enhance the stability and retain the structural conformation of enzymes for catalysis. Recyclability and reusability are the main merits of immobilized enzymes over free enzymes. Studies showed that immobilized enzyme laccase can be used up to 7 cycles with 66% efficiency, peroxidase can be recycled to 2 cycles with 50% efficiency, and also cellulase to 3 cycles with 91% efficiency. In this review, basic concepts of immobilization, different immobilization techniques, and carriers used for immobilization are summarized. In addition to that, the potential of immobilized enzymes as the bioremediation agents for the effective degradation of pollutants from the contaminated zone and the impact of different operating parameters are summarized in-depth. Further, this review provides future trends and challenges that have to be solved shortly for enhancing the potential of immobilized systems for large-scale industrial wastewater treatment.

Enhanced sorption and reduction of Cr(VI) by the flowerlike nanocomposites combined with molybdenum disulphide and polypyrrole

Developing high-performance adsorbent for hexavalent chromium (Cr(VI)) elimination presents an enticing prospect in environmental remediation. Herein, three-dimensional flowerlike nanospheres composed of molybdenum disulphide and polypyrrole (MoS₂@PPy) were successfully prepared via a one-pot hydrothermal and subsequent carbothermal reduction process for the removal of Cr(VI). The effects of pH, adsorbent dosage, co-existing ions, initial Cr(VI) concentration and temperature were investigated systematically by batch experiments. Benefiting from the incorporation of MoS₂, the obtained MoS₂@PPy composites showed a dramatic increase of specific surface area (149.82 m²·g^-1) and adsorption capacity (230.97 mg·g^-1) when compared with the pure PPy nanoparticles. Based on the thermodynamics study and X-ray photoelectron spectroscopy analyses, the removal process of Cr(VI) was proved to be exothermic and spontaneous, and accessible under-coordinated Mo(IV) and pyrrolic N groups coupled with redox reactions were conducive to the efficient removal of Cr(VI). Attractively, the MoS₂@PPy acted as the electron donor could also activate peroxymonosulphate for the efficient degradation of organic contaminants. These results suggested that the MoS₂@PPy was promising in Cr(VI) elimination and other kinds of organic pollutants removal in wastewater.

Application of microbial immobilization technology for remediation of Cr(VI) contamination: A review

The discharge of chromium (Cr) contaminated wastewater is creating a serious threat to aquatic environment due to the rapid pace in agricultural and industrial activities. Particularly, the long-term exposure of Cr(VI) polluted wastewater to the environment is causing serious harm to human health. Therefore, the treatment of Cr(VI) contaminated wastewater is demanding widespread attention. Regarding this, the bioremediation is being considered as a reliable and feasible option to handle Cr(VI) contaminated wastewater because of having low technical investment and operating costs. However, certain factors such as loss of microorganisms, toxicity to microorganisms and uneven microbial growth cycle in the presence of high concentrations of Cr(VI) are hindering its commercial applications. Regarding this, microbial immobilization technology (MIT) is getting great research interest because it could overcome the shortcomings of bioremediation technology's poor tolerance against Cr. Therefore, this review is the first attempt to emphases recent research developments in the remediation of Cr(VI) contamination via MIT. Starting from the selection of immobilized carrier, the present review is designed to critically discuss the various microbial immobilizing methods i.e., adsorption, embedding, covalent binding and medium interception. Further, the mechanism of Cr(VI) removal by immobilized microorganism has also been explored, precisely. In addition, three kinds of microorganism immobilization devices have been critically examined. Finally, knowledge gaps/key challenges and future perspectives are also discussed that would be helpful for the experts in improving MIT for the remediation of Cr(VI) contamination.

Enhancing the Thermal Stability of Ionogels: Synthesis and Properties of Triple Ionic Liquid/Halloysite/MCC Ionogels

In this study, an ionic liquid (IL), 1-butyl-3-methylimidazolium acetate, was used to prepare ionogels with microcrystalline cellulose (MCC) and halloysite (Hal). SEM, XRD, TG, DSC, FTIR spectroscopy, conductometry and mechanical tests were used to study the morphology, structure, thermal behaviour and electrophysical and mechanical characteristics of synthesised ionogels. XRD analysis showed a slight decrease in the interlayer space of halloysite in ionogels containing MCC, which may have been associated with the removal of residual water molecules resulting from hydrophilic IL anions and polymer macromolecules. A change in conductivity and glass-transition temperature of the ionic liquid was revealed due to intercalation into halloysite (a confinement effect) and modification with cellulose. For triple IL/Hal/MCC ionogels, the characteristic thermal degradation temperatures were higher than the corresponding values for IL/Hal composites. This indicates that the synthesised IL/Hal/MCC ionogels are characterised by a greater thermal stability than those of IL/Hal systems.

KOH-activated high surface area Douglas Fir biochar for adsorbing aqueous Cr(VI), Pb(II) and Cd(II)

Biochar has become a popular research topic in sustainable chemistry for use both in agriculture and pollution abatement. To enhance aqueous Cr(VI), Pb(II) and Cd(II) removal efficiency, high surface area (535 m²/g) byproduct Douglas fir biochar (DFBC) from commercial syn-gas production obtained by fast pyrolysis (900-1000 °C, 1-10 s), was subjected to a KOH activation. KOH-activated biochar (KOHBC) underwent a remarkable surface area increase to 1049 m²/g and a three-fold increase in pore volume (BET analysis). Batch sorption studies on KOHBC verses pH revealed that the highest chromium, lead and cadmium removal capacities occurred at pH 2.0, 5.0 and 6.0, respectively. KOHBC exhibited much higher adsorption capacities than unactivated DFBC. Heavy metal loadings onto KOHBC were characterized by scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. Sorption of Cr(VI), Pb(II) and Cd(II) all followed pseudo-second order kinetics and the Langmuir adsorption model. The highest Langmuir adsorption capacities at the respective pH's of maximum adsorption were 140.0 mg g^-1 Pb(II), 127.2 mg g^-1 Cr(VI) and 29.0 mg g^-1 Cd(II). Metal ions spiked into natural and laboratory waste water systems exhibited high sorption capacities. Desorption studies carried out using 0.1 M HCl revealed that Pb(II) adsorption onto the KOHBC surface is reversible. Portions of Cd(II) and Cr(VI) adsorbed strongly onto KOHBC were unable to be desorbed by 0.1 M HCl and 0.1 M NaOH.

Preparation of halloysite nanotubes-encapsulated magnetic microspheres for elemental mercury removal from coal-fired flue gas

Halloysite nanotubes (HNTs) as a natural and inexpensive clay mineral with hollow nanotubular structures, good biocompatibility and active surfaces have been ubiquitously applied in many fields. In this work, a novel multifunctional core-shell sorbent based on HNTs, CuCl₂-HNTs encapsulated magnetic microspheres (SiO₂@Fe₃O₄), was successfully fabricated and applied for Hg⁰ removal from flue gas with good performance for the first time. The core-shell structure prevented the composites from aggregating but kept their magnetism, which enabled the adsorbents being easily separated for reuse by an external magnetic field. In addition, the special structure also significantly enhanced the adsorption capacity of the composites by dispersing the CuCl₂ modified HNTs on the prepared magnetic microspheres. The adsorption performance was comprehensively investigated and fitted by dynamic models. The adsorption followed surface adsorption, particle diffusion and chemisorption with very good SO₂ tolerance. The Cu⁺, Cl^- and lattice oxygen were the crucial components for Hg⁰ removal. In order to further understand the possible mechanism, an online home-made coupling system of temperature-programmed decomposition (TPD) was used to investigate the mercury species on the spent adsorbent in addition to X-ray photoelectron spectroscopy analysis. The results confirmed the mercury species adsorbed were primarily Hg⁰, HgO and HgCl₂.

Study on detoxification and removal mechanisms of hexavalent chromium by microorganisms

Extensive industrial activities have led to an increase of the content of chromium in the environment, which causes serious pollution to the surrounding water, soil and atmosphere. The enrichment of chromium in the environment through the food chain ultimately affects human health. Therefore, the remediation of chromium pollution is crucial to development of human society. A lot of scholars have paid attention to bioremediation technology owing to its environmentally friendly and low-cost. Previous reviews mostly involved pure culture of microorganisms and rarely discussed the optimization of bioreduction conditions. To make up for these shortcomings, we not only introduced in detail the conditions that affect microbial reduction but also innovatively introduced consortium which may be the cornerstone for future treatment of complex field environments. The aim of this study is to summary chromium toxicity, factors affecting microbial remediation, and methods for enhancing bioremediation. However, the actual application of bioremediation technology is still facing a major challenge. This study also put forward the current research problems and proposed future research directions, providing theoretical guidance and scientific basis for the application of bioremediation technology.

Determination of bongkrekic acid and isobongkrekic acid in rice noodles by HPLC-Orbitrap HRMS technology using magnetic halloysite nanotubes

The existing extraction and detection methods of bongkrekic acid (BKA) and isobongkrekic acid (IBKA) are complex, time-consuming and solvent-consuming. In this work, a simple and fast pre-concentration procedure based on Fe₃O₄/HNTs was developed for the determination of BKA and IBKA in rice noodles using HPLC-Orbitrap HRMS. The structure and morphology of Fe₃O₄/HNTs was characterized by means of XRD, SEM, FT-IR and VSM. Parameters affecting the extraction efficiency including adsorbent amount, pH, extraction time, type and volume of eluent were investigated by employing the response surface method. Results indicated that the proposed method had favorable linearity in the concentration range of 2-200 μg/L with a correlation coefficient >0.998. Method LOD and LOQ were 0.3 μg/kg and 1.0 μg/kg, respectively. Finally, the method was successfully applied to determine BKA and IBKA in rice noodle samples from southern China with recoveries ranging from 79.8% to 102.6% and relative standard deviation (RSD) of 4.2%-7.1%.

Synthesis of diglycolic acid functionalized core-shell silica coated Fe3O4 nanomaterials for magnetic extraction of Pb(II) and Cr(VI) ions

Amine-terminated core-shell silica coated magnetite nanoparticles were functionalized with diglycolic acid for the first time to create acid moiety on the surface of the nanoparticles. The formation of magnetite nanoparticles was scrutinised through XRD, SEM, EDS, TEM, VSM and FTIR spectroscopy. The BET surface area of nano-sorbent was found to be 4.04 m2/g with pore size 23.68 nm. These nanomaterials were then utilized to remove the Pb(II) and Cr(VI) ions from their aqueous media and uptake of metal ions was determined by atomic absorption spectroscopy (AAS). A batch adsorption technique was applied to remove both ions at optimised pH and contact time with maximum adsorption efficiency for Pb(II) ions at pH 7 while for Cr(VI) ions at pH 3. Adsorption mechanism was studied using Langmuir and Freundlich isotherms and equilibrium data fitted well for both the isotherms, showing complex nature of adsorption comprising both chemisorption as well as physio-sorption phenomena. The nanosorbents exhibited facile separation by applying external magnetic field due to the ferrimagnetic behaviour with 31.65 emu/g saturation magnetization. These nanosorbents were also found to be used multiple times after regeneration.

Multifunctional HNT@Fe3O4@PPy@DOX Nanoplatform for Effective Chemo-Photothermal Combination Therapy of Breast Cancer with MR Imaging

Multifunctional nanoparticles for imaging and treatment in cancer are getting more and more attention recently. Herein, halloysite nanotubes (HNTs), natural clay nanotubes, are designed as multifunctional nanoplatform for targeted delivering photothermal therapy agents and chemotherapeutic drugs. Fe₃O₄ was anchored on the outer surfaces of HNTs and then doxorubicin (DOX) was loaded on the nanotubes. Afterward, a layer of polypyrrole (PPy), as photothermal agent, was wrapped on the tubes. The nanoplatform of HNT@Fe₃O₄@PPy@DOX can be guided to tumor tissue by an external magnetic field, and then performs chemo-photothermal combined therapy by 808 nm laser irradiation. HNT@Fe₃O₄@PPy@DOX shows the ability of T₂-weighted magnetic resonance imaging, which could be considered as a promising application in magnetic targeting tumor therapy. In vitro and in vivo experiments demonstrate that HNTs nanoplatform has good biocompatibility and produces a strong antitumor effect trigged by near-infrared laser irradiation. The novel chemo-photothermal therapy nanoplatform based on HNTs may be developed as a multifunctional nanoparticle for imaging and therapy in breast cancer.

Iron mineral-humic acid complex enhanced Cr(VI) reduction by Shewanella oneidensis MR-1

Microorganisms, iron minerals, and humic acid are widely common in the soil and water environment and closely interact within environmental processes. In this study, the Cr(VI) removal by Shewanella oneidensis MR-1 (S. oneidensis) was examined in the presence of goethite and humic acid (HA) to mimic the real environment situation. Scanning electron microscopy (SEM) combined with energy disperse spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance (EPR) technologies were used to probe the Cr(VI) reduction mechanism. Our results showed that S. oneidensis alone could reduce 65% of 1.0 mM Cr(VI) after 8 h of the reduction process. Meanwhile, Cr(VI) reduction rate was declined to 56% in the presence of goethite or humic acid. Contrary, the Cr(VI) reduction rate was mightily increased to 79% by the ternary complex of S. oneidensis-goethite-HA where reduced humic acid (HA_red) acted as electron shuttles and diminished the bacterial adhesion to the goethite surface thereby enhanced electron transfer and increased the extent of Cr(VI) reduction by 1.3 fold. XPS analysis indicated that Cr(VI) was reduced to Cr(III), and the final yields were Cr(OH)₃ and Cr₂O₃ precipitated on the surface of bacterial cells. S. oneidensis could also reduce Fe(III) in goethite to Fe(II), which in turn reduced Cr(VI). These results suggested that iron mineral-humic acid complex could enhance the microbial reduction of Cr(VI) and revealed the promotion role of HA in the Cr(VI) bioreduction process. This study affords inclusive insights on the Cr(VI) reduction kinetics and mechanisms in the most complicated systems.

Fabrication of core@shell structural Fe-Fe2O3@PHCP nanochains with high saturation magnetization and abundant amino groups for hexavalent chromium adsorption and reduction

The rational design of novel adsorption materials is imperative to remove toxic metal species from the polluted water. Herein, a core@shell structural Fe-Fe₂O₃@poly (hexachlorocyclotriphosphazene-co-polyethylenimine) (Fe-Fe₂O₃@PHCP) magnetic nanochain with high saturation magnetization was fabricated and used for effective adsorption and reduction of hexavalent chromium. The morphology and microstructure of Fe-Fe₂O₃@PHCP were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The effects of concentration, pH, contact time, temperature and coexisting ions on Cr (VI) removal were studied. Four kinetic models (pseudo-first-order, pseudo-second-order, Bangham and intraparticle diffusion models) and two isotherm models (Freundlich and Langmuir) were used to fit experimental data. Results show the adsorption capacity of Fe-Fe₂O₃@PHCP for Cr (VI) is up to 229.0 mg g^-1. The excellent performance was ascribed to the favorable reduction of Cr (VI) to Cr (III), followed by the chelation of Cr (III) with imino groups. Meanwhile, the residual Cr (VI) were adsorbed on protonated amino and imino groups. The adsorption process is exothermic and spontaneous and nicely follows pseudo-second-order kinetics, intraparticle diffusion model and Langmuir isotherm model. These results indicated that easily separable Fe-Fe₂O₃@PHCP magnetic nanochains could be a promising adsorbent to remediate chromate wastewater.

Preparation and Characterization of Fe-Mn Binary Oxide/Mulberry Stem Biochar Composite Adsorbent and Adsorption of Cr(VI) from Aqueous Solution

This study details the preparation of Fe-Mn binary oxide/mulberry stem biochar composite adsorbent (FM-MBC) from mulberry stems via the multiple activation by potassium permanganate, ferrous chloride, triethylenetetramine, and epichlorohydrin. The characteristics of FM-MBC had been characterized by SEM-EDS, BET, FT-IR, XRD, and XPS, and static adsorption batch experiments such as pH, adsorption time, were carried out to study the mechanism of Cr(VI) adsorption on FM-MBC and the impact factors. The results indicated that in contrast with the mulberry stem biochar (MBC), the FM-MBC has more porous on surface with a BET surface area of 74.73 m²/g, and the surface loaded with α-Fe₂O₃ and amorphization of MnO₂ particles. Besides, carboxylic acid, hydroxyl, and carbonyls functional groups were also formed on the FM-MBC surface. At the optimal pH 2.0, the maximum adsorption capacity for Cr(VI) was calculated from the Langmuir model of 28.31, 31.02, and 37.14 mg/g at 25, 35, and 45 °C, respectively. The aromatic groups, carboxyls, and the hydroxyl groups were the mainly functional groups in the adsorption of Cr(VI). The mechanism of the adsorption process of FM-MBC for Cr(VI) mainly involves electrostatic interaction, surface adsorption of Cr(VI) on FM-MBC, and ion exchange.

Construction of novel graphene-based materials GO@SiO2@C@Ni for Cr(VI) removal from aqueous solution

A series of novel sandwich-like GO@SiO₂@C@Ni composites were developed. The morphologies and adsorption capacities of the materials sintered at different carbonization temperatures were investigated. The formed GO@SiO₂@C@Ni-400 possessed of wonderful dispersion, large surface area (229.88 m²/g) and high saturation magnetization. Batch experimental results revealed that maximum adsorption capacities of these materials towards Cr(VI) were as follows: GO@SiO₂@C@Ni-400 (299.20 mg/g) > GO@SiO₂@C@Ni-500 (244.05 mg/g) > GO (202.39 mg/g) > Graphene@C@Ni (188.80 mg/g) > GO@SiO₂@C@Ni-600 (165.51 mg/g) > GO@SiO₂@C@Ni-700 (93.36 mg/g). Moreover, the influence of hydrochemistry, such as contact time, pH, co-existing ions and solution temperature, on Cr(VI) adsorption was researched as well. It was demonstrated that GO@SiO₂@C@Ni-400 had remarkable adsorption capacity for Cr(VI) removal under the acidic condition, hardly disturbed by other anions, and showed better adsorption performance at 328 K. Besides, On the base of X-ray photoelectron spectroscopy analysis, mechanisms of adsorption could be explained that Cr(VI) was reduced to Cr(III) by nitrogen dopant, and the complexation was existed between Cr(VI) and oxygen-containing functional groups. Additionally, GO@SiO₂@C@Ni-400 could be easily separated under the external magnetic field and displayed outstanding reusability. Herein, GO@SiO₂@C@Ni-400 opens up the possibility of future practical applications.

Impact of biochar-supported zerovalent iron nanocomposite on the anaerobic digestion of sewage sludge

Anaerobic digestion (AD) is an attractive technology for sludge treatment as it stabilizes sludge and produce renewable energy. However, problems such as low organic matter content and high heavy metals level are often encountered which severely limits the effectiveness of AD. In this study, the biochar-supported nanoscale zerovalent iron (nZVI-BC) was synthesized and used as additives during AD of sewage sludge to investigate the enhancement effects for methane production and its impacts on microbial structure at mesophilic temperature. nZVI-BC addition enhanced process stability by improving the generation and degradation of intermediate organic acids, but inhibitory effects were observed at high dosage. The methane content and cumulative methane yields were increased by 29.56% and 115.39%, respectively. Compared with AD without nZVI-BC, the application of nZVI-BC showed positive effect on improvement of metals (Cu, Cd, Ni, Cr, and Zn) stabilization in the digestate. Microbial community analysis illustrated that nZVI-BC addition could significantly increase the Shannon diversity index and Chao1 richness index of archaea, and meanwhile archaea were more diverse in nZVI-BC amended digesters than in control. It was notable that Methanosaeta dominated in all the digesters at genera level, while the relative abundance of hydrogenotrophic methanogens (Methanobacterium and methanospirillum) increased 35.39% in nZVI-BC amended digesters compared to the control, resulting in higher methane production. The results will guide development of microbial management methods to enhance the stability of AD process.

Microbial Chromate Reduction Coupled to Anaerobic Oxidation of Elemental Sulfur or Zerovalent Iron

Chromate (Cr(VI)), as one of ubiquitous contaminants in groundwater, has posed a major threat to public health and ecological environment. Although various electron donors (e.g., organic carbon, hydrogen, and methane) have been proposed to drive chromate removal from contaminated water, little is known for microbial chromate reduction coupled to elemental sulfur (S(0)) or zerovalent iron (Fe(0)) oxidation. This study demonstrated chromate could be biologically reduced by using S(0) or Fe(0) as inorganic electron donor. After 60-day cultivation, the sludge achieved a high Cr(VI) removal efficiency of 92.9 ± 1.1% and 98.1 ± 1.2% in two independent systems with S(0) or Fe(0) as the sole electron donor, respectively. The deposited Cr(III) was identified as the main reduction product based on X-ray photoelectron spectroscopy. High-throughput 16S rRNA gene sequencing indicated that Cr(VI) reduction coupled to S(0) or Fe(0) oxidation was mediated synergically by a microbial consortia. In such the consortia, S(0)- or Fe(0)-oxidizing bacteria (e.g., Thiobacillus or Ferrovibrio) could generate volatile fatty acids as metabolites, which were further utilized by chromate-reducing bacteria (e.g., Geobacter or Desulfovibrio) to reduce chromate. Our findings advance our understanding on microbial chromate reduction supported by solid electron donors and also offer a promising process for groundwater remediation.

Organic-nanoclay composite materials as removal agents for environmental decontamination

Here we overview the recent advances in the fabrication of sustainable composite nanomaterials with decontamination capacity towards inorganic and organic pollutants. In this regards, we present the development of hybrid systems based on clay nanoparticles with different shapes (such as kaolinite nanosheets and halloysite nanotubes) and organic molecules (biopolymers, surfactants, cucurbituril) as efficient removal agents for both aliphatic and aromatic hydrocarbons. Due to their high specific surface area, clay nanoparticles have been successfully employed as fillers for composite membranes with excellent filtration capacity. The preparation of composite gel beads based on biopolymers (alginate and pectin) and halloysite nanotubes has been discussed and their adsorption capacities towards both heavy metals and organic dyes have been highlighted. We describe the successful preparation of kaolinite/graphene composites as well as tubular inorganic micelles obtained by the select functionalization of the halloysite cavity with anionic surfactants. Finally, recent research on Pickering emulsions (for oil spill remediation) and bioremediation technologies has been discussed.

Here we overview the recent advances in the fabrication of sustainable composite nanomaterials with decontamination capacity towards inorganic and organic pollutants.

Surface modified halloysite nanotubes: A flexible interface for biological, environmental and catalytic applications

Halloysite Nanotubes (HNTs) are clay minerals that possess unique chemical composition and a tubular structure due to which, they have recently emerged as a potential nanomaterial for umpteen applications. Over the years, the myriad applications of HNT have been realized through the surface modification of HNT, which involves the modification of nanotube's inner lumen and the outer surface with different functional compounds. The presence of aluminum and silica groups on the inner and outer surface of HNT enhance the interfacial relationship of the nanotube with different functional agents. Compounds such as alkalis, organosilanes, polymers, compounds of biological origin, surfactants and nanomaterials have been used for the modification of the inner lumen and the outer surface of HNT. The strategies change the constitution of HNT's surface either through micro-disintegration of the surface or by introducing additional functional groups on the surface, which further enhances their potential to be used as a flexible interface for different applications. In this review, the different surface modification strategies of the outer surface and the inner lumen that have been employed over the years have been discussed. The biological, environmental and catalytic applications of these surface modified HNTs with such versatile interface in the past two years have been elaborately discussed as well.

Halloysite nanotubes in analytical sciences and in drug delivery: A review

Halloysite (HNT) is a natural inorganic mineral that has many applications in manufacturing. This review (with 192 references) covers (a) the chemical properties of halloysites, (b) the effects of alkali and acid etching on the loading capacity and the release behavior of halloysites, (c) the use of halloysite nanotubes in analytical sciences and drug delivery, and (d) recent trends in the preparation of magnetic HNTs. Synthetic methods such as co-precipitation, thermal decomposition, and solvothermal method are discussed, with emphasis on optimal magnetization. In the analytical field, recent advancements are summarized in terms of applications of HNT-nanocomposites for extraction and detection of heavy metal ions, dyes, organic pollutants, and biomolecules. The review also covers methods for synthesizing molecularly imprinted polymer-modified HNTs and magnetic HNTs. With respect to drug delivery, the toxicity, techniques for drug loading and the various classes of drug-halloysite nanocomposites are discussed. This review gives a general insight on the utilization of HNT in analytical determination and drug delivery systems which may be useful for researchers to generate new ideas. Graphical abstract Schematic presentation of the structure of halloysite nanotubes, selected examples of modifications and functionalization, and represetative field of applications.