Rapid removal of bacterial endotoxin and natural organic matter in water by dielectric barrier discharge plasma: Efficiency and toxicity assessment

The construction of coupling degradation system low temperature plasma and microbiological denitrification: Interfacial reaction process and synergistic mechanism

The degradation of antibiotic wastewater by low-temperature plasma and the removal of excess nitrogen by biological denitrification with Pseudomonas stutzeri (P. stutzeri) reducing secondary pollution has rarely been reported. In this study, iron and phenolic resin doped carbon-based porous nanofiber membranes are prepared (named RFe2-CNF) by electrostatic spinning technique, where the optimization of structure and composition endows low-temperature plasma system better catalyst performance than that of without catalyst (a 58% increase). Microbiological treatment experiments show that the plasma-degraded solution inhibits the denitrification of the P. stutzeri, but overall shows a strong denitrification effect (93.1%). In the coupling process of advanced oxidation technology and microbial denitrification technology, the possible interfacial reaction process, synergistic degradation mechanism, and products toxicity analysis are studied in detail. In addition, LC-MS and DFT are used to derive possible degradation pathways of pollutants. This work provides a new strategy to improve the degradation performance meanwhile reducing secondary pollution by low-temperature plasma-coupled microbiological treatment.

Intrinsic mechanisms underlying the highly efficient removal of bacterial endotoxin and related risks in tailwater by dielectric barrier discharge plasma

Endotoxin is widely present in aquatic environments and can induce adverse health effects. In this study, dielectric barrier discharge (DBD) plasma was used to remove bacterial endotoxin from the tailwater of a wastewater treatment plant. The removal efficiency of total endotoxin activity was up to 92% with low electrical energy consumption (0.43 J mL^-1%^-1) after 180 s of the DBD plasma treatment, which was better than other previously reported methods. In the early stage of DBD plasma oxidation, the expression of genes related to cell morphology and bacterial antioxidant enzyme synthesis was distinctly down-regulated, suggesting that cell integrity was destroyed, leading to endotoxin release into the solution. Additionally, endotoxin synthesis in the cells was suppressed. The endotoxin in the solution was effectively removed by ·OH, ¹O₂, and O₂·^-generated by the DBD plasma, with second-order reaction rates of 2.69 × 10¹⁰, 2.20 × 10⁷, and 8.60 × 10⁸ mol^-1 L s^-1, respectively. The core toxic component of endotoxin (lipid A) was attacked by these strong oxidative species, generating smaller molecular fragments with low toxicity. Consequently, the inflammatory factors IL-6, IL-β, and TNF-α of endotoxin decreased by 3.4-4.8 folds after the DBD plasma treatment, implying that the health risks posed by endotoxin were greatly reduced. This study revealed the intrinsic mechanisms of the highly efficient removal of bacterial endotoxin by DBD plasma oxidation.

Improved mineralization and total nitrogen reduction by combination of electro-reduction and electro-oxidation for nitrophenol removal

In this work, p-Nitrophenol (p-NP) was electro-chemically removed by using a prepared Co₃O₄/Ti cathode and a BDD anode to achieve the simultaneous reduction of total organic carbon (TOC), total nitrogen (TN) and toxicity. The prepared Co₃O₄/Ti cathode showed higher electro-activity than the Ti cathode towards p-NP reduction with the removal rate higher than 90.6% but without mineralization. The electro-oxidation removed 84.3% of TOC but none of TN. To develop an optimized process for mineralization and TN removal during p-NP electrolysis, the combination of electro-oxidation and electro-reduction were evaluated by using a dual-chamber cell and a single-chamber cell, respectively. As a result of the re-oxidation and re-reduction in the single-chamber cell, the typically used mode of the simultaneous redox, showed a lower removal of TOC and TN than the combination processes as well as an increased toxicity. The TN removal for both combined modes (21.0%-32.9%) was all higher than that of the mode of reduction because the produced inorganic nitrogen such as ammonia and nitrate could be partially oxidized or reduced to nitrogen gas. The results suggested that the combination process could significantly improve the mineralization and TN reduction for p-NP removal, accompanied with 60.3% decrease of acute toxicity for the reduction after oxidation mode.

Efficient disinfection of SARS-CoV-2-like coronavirus, pseudotyped SARS-CoV-2 and other coronaviruses using cold plasma induces spike protein damage

Coronavirus disease 2019 (COVID-19) has become a worldwide public health emergency, and the high transmission of SARS-CoV-2 variants has raised serious concerns. Efficient disinfection methods are crucial for the prevention of viral transmission. Herein, pulse power-driven cold atmospheric plasma (CAP), a novel sterilization strategy, was found to potently inactivate SARS-CoV-2-like coronavirus GX_P2V, six strains of major epidemic SARS-CoV-2 variants and even swine coronavirus PEDV and SADS-CoV within 300 s (with inhibition rate more than 99%). We identified four dominant short-lived reactive species, ONOO^-, ¹O₂, O₂^- and·OH, generated in response to CAP and distinguished their roles in the inactivation of GX_P2V and SARS-CoV-2 spike protein receptor binding domain (RBD), which is responsible for recognition and binding to human angiotensin-converting enzyme 2 (hACE2). Our study provides detailed evidence of a novel surface disinfection strategy for SARS-CoV-2 and other coronaviruses.

Cold plasma technology: advanced and sustainable approach for wastewater treatment

Cold plasma has been a potent energy-efficient and eco-friendly advanced oxidation technology which has gained attention in recent decades as a non-thermal approach in diverse forms of applications. This review highlights a comprehensive account of the implementation of this technology in the field of wastewater treatment to resolve certain issues regarding the degradation of numerous aqueous pollutants and water-borne pathogenic microorganisms including viruses up to a significant level. The paper addresses plasma chemistry sources and mechanisms on wastewater treatment and impact on various physical, chemical, and biological characteristics of treated water. Furthermore, studies have revealed that this emerging technology is effective in inactivating SARS-CoV-2 or coronavirus, which serves as a transmission channel for this lethal virus in wastewater. Despite these benefits, the development of cold plasma as a wastewater treatment technique is still hampered by a lack of information like capital investment, proficient application, liveability, and operating cost, thus necessitating additional research for its booming commercialization, as this can be an emerging approach to solving water crises and meeting the demand for fresh or potable water resources.

A critical review on geosmin and 2-methylisoborneol in water: sources, effects, detection, and removal techniques

The exposure to geosmin (GSM) and 2-methylisoborneol (2-MIB) in water has caused a negative impact on product reputation and customer distrust. The occurrence of these compounds and their metabolites during drinking water treatment processes has caused different health challenges. Conventional treatment techniques such as coagulation, sedimentation, filtration, and chlorination employed in removing these two commonest taste and odor compounds (GSM and 2-MIB) were found to be ineffective and inherent shortcomings. The removal of GSM and MIB were found to be effective using combination of activated carbon and ozonation; however, high treatment cost associated with ozonation technique and poor regeneration efficiency of activated carbon constitute serious setback to the combined system. Other shortcoming of the activated carbon adsorption and ozonation include low adsorption efficiency due to the presence of natural organic matter and humic acid. In light of this background, the review is focused on the sources, effects, environmental pathways, detection, and removal techniques of 2-MIB and GSM from aqueous media. Although advanced oxidation processes (AOPs) were found to be promising to remove the two compounds from water but accompanied with different challenges. Herein, to fill the knowledge gap analysis on these algal metabolites (GSM and 2-MIB), the integration of treatment processes vis-a-viz combination of one or more AOPs with other conventional methods are considered logical to remove these odorous compounds and hence could improve overall water quality.

Combined effect of acoustic cavitation and pulsed discharge plasma on wastewater treatment efficiency in a circulating reactor: A case study of Rhodamine B

The present study investigates the wastewater treatment performance of an acoustic cavitation assisted plasma (ACAP) process in a circulating reactor using Rhodamine B (RhB) as a model water pollution. The concept of this process was proposed by the authors recently for a batch type rector. The measurements revealed that combining the ultrasound irradiation with pulsed discharge plasma allows the RhB degradation efficiency to be drastically increased as compared with the plasma-alone case. This effect is especially significant at higher values of solution electrical conductivity examined in a range of 20 ~ 400 μS/cm. Acidic conditions and larger flow rates of solution were found to be favorable for the degradation efficiency. The effect of flow rate was also analyzed through numerical simulation. The results indicated that the mass transfer of RhB to the plasma-cavitation zone is one of the controlling parameters influencing the degradation performance. Behavior of bubbles and pulse discharge frequency were examined using a high-speed video camera. Relatively large bubbles were found to favor the plasma pulse generation and propagation when move near the high-voltage electrode. On the whole, the results of this study suggest that the ACAP process has the potential to synergistically extend the application area of underwater plasma in both research and industry.

Endotoxin contamination, a potentially important inflammation factor in water and wastewater: A review

Endotoxins, also referred to as lipopolysaccharides or pyrogens, are major components embedded in the outer cell wall membrane of most Gram-negative bacteria and some cyanobacteria. As common pyrogens and strong immune stimulators, health hazards associated with endotoxins in water and wastewater have been attracting attention in recent years. In this paper, the characteristics, existing forms, and detection assays of endotoxins in water and wastewater are reviewed. Cellular response and pathophysiological effects, and main exposure tracts of endotoxins in water and wastewater are discussed. Levels of endotoxin contamination in water, wastewater, and their aerosols are presented. The removal effects of different water and wastewater treatment processes are summarized. Hence, it is important to: (i) Improve investigations into endotoxin contamination in water and wastewater in order to identify their source, occurrence, and fate. (ii) Implement water and wastewater treatment processes capable of ensuring low levels of endotoxins. This review aims to identify efficient water and wastewater treatment processes capable of ensuring the production of WTPs and WWTPs effluents with a low level of endotoxin activity, and to guarantee the reduction of endotoxin exposure risks to the consumers of water and wastewater.

Environmental exposure to endotoxin and its health outcomes: A systematic review

Exposure to endotoxin occurs environmentally and occupationally. There are several differences between them in terms of the variety and severity of health outcomes, possible exposed groups and type and route of exposure. Occupational exposures caused adverse health outcomes in almost all cases, but there is disparity in the incidence of significant health outcomes due to environmental exposure to endotoxin. This study has therefore endeavoured to investigate health outcomes from environmental exposure to endotoxin. A systematic review was conducted of three databases and non-occupational studies reporting the environmental concentration of endotoxin, and observed health outcomes in exposed groups were included in the review (n = 27). The studies showed that first exposure to endotoxin occurs in infancy by the inhalation route. Inhalation is the only exposure route that can induce inflammation as the main symptom of exposure to endotoxin. The studies included were conducted using four approaches: molecular immunology, measurement of lung volumes, clinical sensitisation test and diagnosis of asthmatic and respiratory symptoms such as wheezing. By the immunological approach, all the included studies reported that environmental exposure to endotoxin, especially at a younger age, has a protective effect on the incidence of asthma in adolescence. The main disparity observed was in studies using the approach of diagnosed asthma. Overall, however, they confirm the protective effect of exposure to endotoxin although, in the case of children with non-atopic asthma, the results could be different.

Synthesis of a nanostructured pillar MOF with high adsorption capacity towards antibiotics pollutants from aqueous solution

In this study, various sonochemical conditions were applied to prepare the microsheets, nanosheets and nanoflowers of a metal-organic framework (MOF; [Zn₆(IDC)₄(OH)₂(Hprz)₂]_n) that is composed of Zn(II) cations coordinated with the linear N-donor piperazine (prz) and rigid planar imidazole-4,5-dicarboxylate (H₃IDC) ligands. The PXRD patterns approved purity of the samples and the FT-IR spectra related the detected bonds and functional groups to [Zn₆(IDC)₄(OH)₂(Hprz)₂]_n crystals. The morphological results indicated that any changes in the synthesis conditions can affect nucleation and morphology of the nanostructures. The prepared MOF nanosheets and nanoflowers (with particle size average of 95 and 116 nm, respectively) were employed to adsorb the ampicillin, amoxicillin and cloxacillin antibiotics. Then, the MOFs were calcined at 550 ℃ and atmospheric pressure to produce ZnO nanoparticles and the resultant nanoparticles were adopted to photodegrade the antibiotics. These nanoparticles can photodegrade 37% of the amoxicillin compounds within 180 min. Among the examined samples, the nanoflowers demonstrated the highest adsorption capacity by eliminating 92.5%, 88% and 89% of the antibiotic molecules from the 60-ppm amoxicillin, ampicillin and cloxacillin solutions, respectively. Also, these nanoflowers are thermally stable up to 365 ℃. The associated adsorption process was found to follow pseudo-first-order kinetics, in the case of amoxicillin.

Percarbonate promoted antibiotic decomposition in dielectric barrier discharge plasma

A coupling technique introducing sodium percarbonate (SPC) into a dielectric barrier discharge (DBD) plasma was investigated to enhance the degradation of antibiotic tetracycline (TC) in aqueous. The dominant effects of SPC addition amount and discharge voltage were evaluated firstly. The experiments indicated that the moderate SPC dosages in the DBD presented an obvious synergistic effect, improving the TC decomposition efficiency and kinetics. Elevating the voltage was conducive for the promotion of antibiotic abatement. After 5 min treatment, the removal reached 94.3% at the SPC of 52.0 μmol/L and voltage of 4.8 kV for 20 mg/L TC. Especially the defined synergy factors were greater than one since the SPC being added, and the energy yield was increased by 155%. Besides, the function mechanism was explained by the hydrogen peroxide and ozone quantitative determinations and radical scavenger test, and the results confirmed that the collaborative method could increase the generation of reactive species, and the produced hydroxyl and superoxide radicals both played the significant roles for the TC elimination. Furthermore, the decomposition and mineralization of the synergism were verified by UV-vis spectroscopy, TOC and COD analyses, and the degradation byproducts and transformation pathways were identified based on the analysis of HPLC-MS finally.

Inactivation of airborne bacteria using different UV sources: Performance modeling, energy utilization, and endotoxin degradation

Airborne bacteria-containing bioaerosols have attracted increased research attention on account of their adverse effects on human health. Ultraviolet germicidal irradiation (UVGI) is an effective method to inactivate airborne microorganisms. The present study models and compares the inactivation performance of three UV sources in the UVGI for aerosolized Escherichia coli. Inactivation efficiency of 0.5, 2.2 and 3.1 logarithmic order was obtained at an exposure UV dose of 370 J/m³ under UVA (365 nm), UVC (254 nm) and UVD (185 nm) sources, respectively. A Beer-Lambert law-based model was developed and validated to compare the inactivation performances of the UV sources, and modeling enabled prediction of inactivation efficiency and analysis of the sensitivity of several parameters. Low influent E. coli concentrations and high UV doses resulted in high energy consumption (EC). The change in airborne endotoxin concentration during UV inactivation was analyzed, and UVC and UVA irradiation showed no marked effect on endotoxin degradation. By contrast, both free and bound endotoxins could be removed by UVD treatment, which is attributed to the ozone generated by the UVD source. The results of this study can provide a better understanding of the air disinfection and airborne endotoxin removal processes.

Reaction kinetics of phenols and p-nitrophenols in flowing aerated aqueous solutions generated by a discharge plasma jet

In this paper, we propose a method for removing phenols and p-nitrophenols (PNPs) from flowing aqueous solutions generated by atmospheric pressure plasma jets (APPJs). For analyzing the removal characteristics, multiple techniques were used, including flow speed analysis of the aerated solution, optical emission spectroscopy (OES), and liquid chromatography. In addition, the reaction kinetics of diffusion and activation control processes were evaluated using aerated fluid speed variation and the corresponding activation energy. From these results, the relative intensities of hydroxyl radicals produced by an APPJ in water were found to be stronger than those in air and to decrease with increasing flow speed. Furthermore, the reaction kinetics were found to be diffusion-controlled when the solution flow speed was low and activation-controlled under high solution flow speed. It was also found that the degradation efficiency was enhanced with increasing flow speed, which increased the discharge voltage and temperature of the solution and changed the initial pH value when TiO₂/UV catalysis was used. From the complex relationship between the reactive species, fluid diffusion, and discharge parameters in wastewater described herein, it is anticipated that these findings will facilitate new approaches to both the design and optimization of discharge reactors intended for wastewater treatment.

Non-thermal atmospheric pressure plasma jet for the bacterial inactivation in an aqueous medium

This study reports the potential of non-thermal atmospheric pressure plasma jet for the bacterial inactivation in an aqueous medium. All experiments were conducted in a reactor containing aqueous solution i.e., water, pre-inoculated with bacterial suspensions and after plasma exposure solution is inoculated in Petrifilm to know the viable count. The plasma jet exposure to the bacterial aqueous solution was carried out under various gases such as helium, argon, air and also in combination as Argon + Air and Helium + Air. In each case, the oxidizing species such as hydrogen peroxide, nitric acid, hydroxyl radicals and ozone formed in the reactor during the plasma exposure were quantified. The effect of applied voltage and gas flow rate were studied to optimize the conditions for its efficacy. The solution pH plays a prominent role in bacterial inactivation, as the process is effective at low pH exhibiting 7 log reduction of bacterial population. The bacterial inactivation is efficient at below the critical pH (<4.7) and the inactivation process becomes less effective if the pH goes above 4.7. Plasma treatment of deionized water produces some reactive species such as hydrogen peroxide and nitrates, this plasma treated water is used to test the bacterial inactivation. Addition of Fe²⁺ salt to the plasma treated water improves the efficacy by converting hydrogen peroxide to hydroxyl radicals, which serves to be a major contributor to the bacterial inactivation. Especially, Non-thermal plasma offers an alternative way to sterilize vacuum sensitive and thermo-labile living tissues.

Advanced oxidation-based treatment of furniture industry wastewater

The paper presents a study on the treatment of the furniture industry wastewater in a bench scale advanced oxidation reactor. The researched technology utilized a simultaneous application of ozone, ultraviolet radiation and surface-immobilized TiO₂ nanoparticle catalyst. Various combinations of processes were tested, including photolysis, photocatalysis, ozonation, catalytic ozonation, photolytic ozonation and photocatalytic ozonation were tested against the efficiency of degradation. The efficiency of the processes was primarily characterized by the total organic carbon (TOC) analysis, indicating the remaining organic material in the wastewater after the treatment, while the toxicity changes in wastewater were researched by Daphnia magna toxicity tests. Photocatalytic ozonation was confirmed as the most effective combination of processes (99.3% of TOC reduction during 180 min of treatment), also being the most energy efficient (4.49-7.83 MJ/g). Photocatalytic ozonation and photolytic ozonation remained efficient across a wide range of pH (3-9), but the pH was an important factor in photocatalysis. The toxicity of wastewater depended on the duration of the treatment: half treated water was highly toxic, while fully treated water did not possess any toxicity. Our results indicate that photocatalytic ozonation has a high potential for the upscaling and application in industrial settings.

Ozone-UV-catalysis based advanced oxidation process for wastewater treatment

A bench-scale advanced oxidation (AO) reactor was investigated for the degradation of six pollutants (2-naphthol, phenol, oxalic acid, phthalate, methylene blue, and D-glucose) in a model wastewater at with the aim to test opportunities for the further upscale to industrial applications. Six experimental conditions were designed to completely examine the experimental reactor, including photolysis, photocatalysis, ozonation, photolytic ozonation, catalytic ozonation, and photocatalytic ozonation. The stationary catalyst construction was made from commercially available TiO₂ nanopowder by mounting it on a glass support and subsequently characterized for morphology (X-ray diffraction analysis and scanning electron microscopy) as well as durability. The ozone was generated in a dielectrical barrier discharge reactor using air as a source of oxygen. The degradation efficiency was estimated by the decrease in total organic carbon (TOC) concentration as well as toxicity using Daphnia magna, and degradation by-products by ultra-performance liquid chromatography-mass spectrometry. The photocatalytic ozonation was the most effective for the treatment of all model wastewater. The photocatalytic ozonation was most effective against ozonation and photolytic ozonation at tested pH values. A complete toxicity loss was obtained after the treatment using photocatalytic ozonation. The possible degradation pathway of the phthalate by oxidation was suggested based on aromatic ring opening reactions. The catalyst used at this experiment confirmed as a durable for continuous use with almost no loss of activity over time. The design of the reactor was found to be very effective for water treatment using photocatalytic ozonation. Such design has a high potential and can be further upscaled to industrial applications due to the simplicity and versatility of manufacturing and maintenance.