Degradation of sulfamethazine using Fe3O4-Mn3O4/reduced graphene oxide hybrid as Fenton-like catalyst

Ultrasensitive chemiluminescence detection based on titanium-doped spinel-structured nanoparticles with abundant oxygen vacancies

We successfully synthesized spinel-structured ternary nanocatalyst Ti-Co3O4/Fe3O4 nanoparticles (NPs) for the first time. Ti-Co3O4/Fe3O4 NPs exhibited superior catalytic performance compared to the synthesized binary catalysts Co3O4/Fe3O4. Moreover, Ti-Co3O4/Fe3O4 NPs can enhance the chemiluminescence (CL) intensity of the luminol/H2O2 system by over 3800-fold, attributed to the high density of oxygen vacancies (OVs) within the structure. OVs contribute to electron delocalization, improve conductivity, and are recognized as crucial active sites in the catalytic decomposition of H2O2. Based on the inhibitory effect of L-ascorbic acid (AA) on the luminol/H2O2 CL system, we developed a sensitive, rapid, effective, and highly selective AA CL assay with a linear range of 0.1 μmol/L to 100 μmol/L and a limit of detection (LOD, S/N = 3) of 0.044 μmol/L. The method was successfully applied to quantify AA in vitamin C tablets with recoveries ranging from 99.7 % to 106.3 %. This research provides a promising prospect for the application of spinel-structured nanoparticles in CL detection platforms and offers valuable insights into nanoparticle size modulation and OV engineering for catalytic optimization.

Multifunctional nanozymatic biosensors: Awareness, regulation and pathogenic bacteria detection

It is estimated that approximately 700,000 fatalities occur annually due to infections attributed to various pathogens, which are capable of dissemination via multiple environmental vectors, including air, water, and soil. Consequently, there is an urgent need to enhance and refine rapid detection technologies for pathogens to prevent and control the spread of associated diseases. This review focuses on applying nanozymes in constructing biosensors, particularly their advancement in detecting pathogenic bacteria. Nanozymes, which are nanomaterials exhibiting enzyme-like activity, combine unique magnetic, optical, and electronic properties with structural diversity. This blend of characteristics makes them highly appealing for use in biocatalytic applications. Moreover, their nanoscale dimensions facilitate effective contact with pathogenic bacteria, leading to efficient detection and antibacterial effects. This article briefly summarizes the development, classification, and strategies for regulating the catalytic activity of nanozymes. It primarily focuses on recent advancements in constructing biosensors that utilize nanozymes as probes for sensitively detecting pathogenic bacteria. The discussion covers the development of various optical and electrochemical biosensors, including colorimetric, fluorescence, surface-enhanced Raman scattering (SERS), and electrochemical methods. These approaches provide a reliable solution for the sensitive detection of pathogenic bacteria. Finally, the challenges and future development directions of nanozymes in pathogen detection are discussed.

Photocatalytic degradation of organic pollutants in wastewater using magnetic functionalized reduced graphene oxide nanocomposites. A review

Potable water supply has become a significant global concern due to the prevalent nature of organic dyes and pharmaceutical and agricultural chemical pollutants found in water resources. This has necessitated ongoing research on the development of efficient materials and relevant wastewater treatment methods. In this regard, the photocatalysis method has emerged as one of the superior wastewater treatment techniques due to its outstanding application advantages. Therefore, this review is an attempt to summarise the research carried out on the applications of magnetic functionalized reduced graphene oxide nanocomposites in the heterogeneous photocatalytic degradation of organic pollutants found in wastewater. Furthermore, it provides valuable insights into the synthesis methods and characterization of these materials to evaluate their physicochemical and structural properties. These nanocomposites have magnetic properties for rapid catalyst separation from aqueous solution, high electrical conductivity, and thermal properties to improve photocatalytic activities. During photocatalysis, reduced graphene oxide serves as an acceptor and transporter of photogenerated electrons and provides pollutant binding sites, whereas the magnetic properties of the nanocomposite enable reusability of the photocatalyst. Therefore, the regeneration of photocatalysts is significant for toxic waste disposal and economic viability, and it improves the sustainability of the process. Finally, we summarized research constraints and future perspectives associated with the applications of these nanocomposites in wastewater treatment.

Insight into Peroxymonosulfate Activation Catalyzed by Fe/Mn Bimetallic-Loaded In Situ Nitrogen-Doped Biochar: the Critical Role of Singlet Oxygen and Superoxide Radicals

Water pollution caused by emerging contaminants poses significant environmental and health risks, while the management of invasive algal biomass remains an underutilized resource. This study presents a novel Fe/Mn-modified in situ N-doped Enteromorpha prolifera-derived biochar catalyst (Fe/Mn/EP), addressing the dual challenges of efficient peroxymonosulfate (PMS) activation and utilization of invasive algal biomass. Through a straightforward one-step pyrolysis approach, the obtained catalyst integrated nitrogen functionalities and bimetallic active sites, enabling it to achieve an outstanding catalytic performance. It completely degraded carbamazepine (CBZ) in water samples within 30 min. The degradation process relied on the synergy between radical and nonradical pathways, primarily dominated by singlet oxygen (1O2) and superoxide radicals (·O2-). Specifically, in situ nitrogen doping, particularly involving pyrrole and graphite nitrogen, enhanced PMS activation by regulating the electronic properties and increasing the density of active sites. The degradation of CBZ significantly reduces the toxicity of the system by analysis prediction based on quantitative structure-activity relationship. The Fe/Mn/EP catalyst demonstrated broad adaptability across various emerging pollutants and real water matrices. This work highlights a sustainable strategy to transform problematic algae into high-performance biochar-based catalysts, offering a scalable solution for water pollution remediation.

Boosted antibiotic degradation using magnetite nanoparticles doped ultrafine activated charcoal powder to activate H2O2: Insights into mechanisms and competitive kinetics

The treatment of antibiotic wastewater often faces the challenge of simultaneously and effectively degrading multiple components under complex conditions. To address this challenge, magnetite nanoparticles doped ultrafine activated charcoal powder (MNPs/UACP), which effectively catalyzed the decomposition of H2O2 into •OH and HO2•, was prepared using chemical co-precipitation. Under optimum conditions (i.e., tetracycline (TC) concentration = 100 ppm, pH = 3, H2O2 concentration = 4.9 mM, catalyst dosage = 0.5 g/L), the 50% MNPs/UACP-H2O2 system achieved 97.5% TC removal within 180 min, driven by the synergistic action between adsorption and catalytic oxidation. The stability of 50% MNPs/UACP in recycling was evaluated through repeated reaction cycles, demonstrating that the TC removal efficiency remained at 91.0% even after five cycles. The competition among TC, oxytetracycline (OTC), and chloramphenicol (CAP) in the MNPs/UACP-H2O2 system was closely related to the catalytic oxidation performance, and increasing the proportion of MNPs in MNPs/UACP to above 50% effectively reduced the competition, optimizing degradation efficiency. This study is among the first to provide a comprehensive understanding of adsorption-catalytic oxidation coupled system, offering new insights for broad environmental applications.

Activation potential decreasing of iron oxide/graphite felt cathode by introducing Mn in electrochemical Fenton-like reactions

In electrochemical advanced oxidation processes (EAOPs), energy consumption cannot be ignored. In this work, Mn-Fe oxide/graphite felt (GF) cathodes were synthesized by in situ reduction and low temperature calcination. The obtained Mn-Fe oxide/GF was used as cathodes to activate peroxymonosulfate (PMS) for atrazine (ATZ) degradation in the EAOPs system. The minimal activation potential (ηmin) of PMS was used to evaluate the activity of the cathodes, and it was found that the introduction of Mn element can effectively reduce the ηmin of PMS on the Fe oxide/GF cathode. The energy consumption by optimized Mn-Fe oxide/GF can be decreased to ∼85.1% in the EAOPs system compared to that without Mn. In addition, the introducing of Mn can also enhance the activity and stability of the catalyst with decreased Fe leaching. Quenching experiments and electron paramagnetic resonance (EPR) test indicated that the EAOPs system could generate several reactive oxygen species (ROSs), including •OH, SO4•-, O2•- and 1O2. This work decreases the potential by introducing Mn and provides a method to reduce the energy consumption in EAOPs.

Enhancing heterogeneous Fenton-like catalysis through pyrrolidine modification of Fe2O3-CuO composites with oxygen-vacancy defects

Enhancing the generation of reactive hydroxyl radicals (•OH) is crucial for overcoming the limitations of the low reactivity of heterogeneous Fenton Fe-based catalysts. Researchers have explored various methods to modify catalyst structures to enhance reactivity, yet often at the expense of stability. Herein, suitable carbon and nitrogen-codoped Fe2O3-CuO composites were synthesized via pyrolysis method, demonstrating high Fenton reaction activity and remarkable stability. Experimental findings and density functional theory calculations (DFT) revealed that the presence of oxygen vacancies on the catalyst surface facilitated an increase in exposed FeNC active sites, promoting electron transfer and the accelerating the rate of •OH generation. Moreover, carbon and nitrogen, particularly in the form of pyrrole nitrogen bonded to Fe imparted exceptional stability to the FeNC active sites, mitigating their dissolution. Additionally, the Fe-based catalysts exhibited strong magnetism, enabling easy separation from the reaction solution while maintaining a high degradation efficiency for various organic pollutants, even in the presence of multiple anions. Furthermore, a comprehensive mechanism for methylene blue (MB) degradation was identified, enhancing the potential practical applications of these catalysts.

Recent trends in magnetic spinel ferrites and their composites as heterogeneous Fenton-like catalysts: A review

In recent years, there has been a growing interest in utilizing spinel ferrite and their nanocomposites as Fenton-like catalysts. The use of these materials offers numerous advantages, including ability to efficiently degrade pollutants and potential for long-term and repeated use facilitated by their magnetic properties that make them easily recoverable. The remarkable catalytic properties, stability, and reusability of these materials make them highly attractive for researchers. This paper encompasses a comprehensive review of various aspects related to the Fenton process and the utilization of spinel ferrite and their composites in catalytic applications. Firstly, it provides an overview of the background, principles, mechanisms, and key parameters governing the Fenton reaction, along with the role of physical field assistance in enhancing the process. Secondly, it delves into the advantages and mechanisms of H2O2 activation induced by different spinel ferrite and their composites for the removal of organic pollutants, shedding light on their efficacy in environmental remediation. Thirdly, the paper explores the application of these materials in various Fenton-like processes, including Fenon-like, photo-Fenton-like, sono-Fenton-like, and electro-Fenton-like, for the effective removal of different types of contaminants. Furthermore, it addresses important considerations such as the toxicity, recovery, and reuse of these materials. Finally, the paper presents the challenges associated with H2O2 activation by these materials, along with proposed directions for future improvements.

Breaking the pH Limitation of Nanozymes: Mechanisms, Methods, and Applications

Although nanozymes have drawn great attention over the past decade, the activities of peroxidase-like, oxidase-like, and catalase-like nanozymes are often pH dependent with elusive mechanism, which largely restricts their application. Therefore, a systematical discussion on the pH-related catalytic mechanisms of nanozymes together with the methods to overcome this limitation is in need. In this review, various nanozymes exhibiting pH-dependent catalytic activities are collected and the root causes for their pH dependence are comprehensively analyzed. Subsequently, regulatory concepts including catalytic environment reconstruction and direct catalytic activity improvement to break this pH restriction are summarized. Moreover, applications of pH-independent nanozymes in sensing, disease therapy, and pollutant degradation are overviewed. Finally, current challenges and future opportunities on the development of pH-independent nanozymes are suggested. It is anticipated that this review will promote the further design of pH-independent nanozymes and broaden their application range with higher efficiency.

Deep degradation of sulfamethoxazole by the Fe-Co/γ-Al2O3-catalysed photo-Fenton system

The heterogeneous photo-Fenton system using Fe-Co/γ-Al2O3 as a catalyst was applied in the study of sulfamethoxazole(SMX) degradation. The morphology, structure, elemental composition and metal valence distribution of Fe-Co/γ-Al2O3 were found to be relatively stable before and after the reaction. The highest SMX degradation efficiency and mineralization (The ratio of organic matter being oxidized to carbon dioxide and water) were obtained under the conditions of 15% Fe-Co loading rate, 1:1 mass ratio of Fe and Co, 1 g/L catalyst dosage, 1.5 mL 30% H2O2 dosage, 18 W UV lamp power and 60 min reaction time, which were 98% and 66%, respectively. Radical quenching experiments and electronic paramagnetic resonance (EPR) characterization revealed that ·OH played an important role in the degradation and mineralization SMX in the Fe-Co/γ-Al2O3 heterogeneous photo-Fenton system. Combined with the analysis of N, S and intermediate products, there may be three degradation pathways of SMX in the heterogeneous photo-Fenton system. This work provides a technical reference for realizing the efficient degradation and mineralization of SMX in a heterogeneous photo-Fenton reaction system.

Size-Dependent Catalysis in Fenton-like Chemistry: From Nanoparticles to Single Atoms

State-of-the-art Fenton-like reactions are crucial in advanced oxidation processes (AOPs) for water purification. This review explores the latest advancements in heterogeneous metal-based catalysts within AOPs, covering nanoparticles (NPs), single-atom catalysts (SACs), and ultra-small atom clusters. A distinct connection between the physical properties of these catalysts, such as size, degree of unsaturation, electronic structure, and oxidation state, and their impacts on catalytic behavior and efficacy in Fenton-like reactions. In-depth comparative analysis of metal NPs and SACs is conducted focusing on how particle size variations and metal-support interactions affect oxidation species and pathways. The review highlights the cutting-edge characterization techniques and theoretical calculations, indispensable for deciphering the complex electronic and structural characteristics of active sites in downsized metal particles. Additionally, the review underscores innovative strategies for immobilizing these catalysts onto membrane surfaces, offering a solution to the inherent challenges of powdered catalysts. Recent advances in pilot-scale or engineering applications of Fenton-like-based devices are also summarized for the first time. The paper concludes by charting new research directions, emphasizing advanced catalyst design, precise identification of reactive oxygen species, and in-depth mechanistic studies. These efforts aim to enhance the application potential of nanotechnology-based AOPs in real-world wastewater treatment.

Reduced graphene oxide promotes the biodegradation of sulfamethoxazole by white-rot fungus Phanerochaete chrysosporium under cadmium stress

The biodegradation of antibiotics in aquatic environment is consistently impeded by the widespread presence of heavy metals, necessitating urgent measures to mitigate or eliminate this environmental stress. This work investigated the degradation of sulfamethoxazole (SMX) by the white-rot fungus Phanerochaete chrysosporium (WRF) under heavy metal cadmium ion (Cd2+) stress, with a focus on the protective effects of reduced graphene oxide (RGO). The pseudo-first-order rate constant and removal efficiency of 5 mg/L SMX in 48 h by WRF decrease from 0.208 h-1 and 55.6% to 0.08 h-1 and 28.6% at 16 mg/L of Cd2+, while these values recover to 0.297 h-1 and 72.8% by supplementing RGO. The results demonstrate that RGO, possessing excellent biocompatibility, effectively safeguard the mycelial structure of WRF against Cd2+ stress and provide protection against oxidative damage to WRF. Simultaneously, the production of manganese peroxidase (MnP) by WRF decreases to 38.285 U/L in the presence of 24 mg/L Cd2+, whereas it recovers to 328.51 U/L upon the supplement of RGO. RGO can induce oxidative stress in WRF, thereby stimulating the secretion of laccase (Lac) and MnP to enhance the SMX degradation. The mechanism discovered in this study provides a new strategy to mitigate heavy metal stress encountered by WRF during antibiotic degradation.

Production of activated carbon from agave residues and its synergistic application in a hybrid adsorption-AOPs system for effective removal of sulfamethazine from aqueous solutions

Tequila production in Mexico generates large quantities of agave bagasse (AB), a waste that could be used more efficiently. AB has a high cellulose, hemicellulose, and lignin content, which allows its use as a precursor for synthesizing carbonaceous materials. In the present work, the synthesis of activated carbon impregnated with Fe2+ (AG-Fe-II) and Fe3+ (AG-Fe-III) was carried out and evaluated in a hybrid adsorption-AOP (advanced oxidation process) methodology for sulfamethazine removal (SMT). The materials were characterized before and after the process to determine their morphological, textural, and physicochemical properties. Subsequently, the effect of the main operational variables (pH, initial SMT concentration, mass, and activator dosage) on the hybrid adsorption-degradation process was studied. The Fenton-like reaction was selected as the AOP for the degradation step, and potassium persulfate (K2S2O8) was used as an activating agent. The main iron crystallographic phases in AG-Fe-II were FeS, with a uniform distribution of iron particles over the material's surface. The main crystallographic phase for AG-Fe-III was Fe3O4. The hybrid process achieved 61% and 78% removal efficiency using AG-Fe-II and AG-Fe-III samples, respectively. The pH and initial SMT concentration were the most critical factors for removing SMT from an aqueous phase. Finally, the material was successfully tested in repeated adsorption-degradation cycles.

Bioinspired graphene-based metal oxide nanocomposites for photocatalytic and electrochemical performances: an updated review

Considering the rapidly increasing population, the development of new resources, skills, and devices that can provide safe potable water and clean energy remains one of the vital research topics for the scientific community. Owing to this, scientific community discovered such material for tackle this issue of environment benign, the new materials with graphene functionalized derivatives show significant advantages for application in multifunctional catalysis and energy storage systems. Herein, we highlight the recent methods reported for the preparation of graphene-based materials by focusing on the following aspects: (i) transformation of graphite/graphite oxide into graphene/graphene oxide via exfoliation and reduction; (ii) bioinspired fabrication or modification of graphene with various metal oxides and its applications in photocatalysis and storage systems. The kinetics of photocatalysis and the effects of different parameters (such as photocatalyst dose and charge-carrier scavengers) for the optimization of the degradation efficiency of organic dyes, phenol compounds, antibiotics, and pharmaceutical drugs are discussed. Further, we present a brief introduction on different graphene-based metal oxides and a systematic survey of the recently published research literature on electrode materials for lithium-ion batteries (LIBs), supercapacitors, and fuel cells. Subsequently, the power density, stability, pseudocapacitance charge/discharge process, capacity and electrochemical reaction mechanisms of intercalation, and conversion- and alloying-type anode materials are summarized in detail. Furthermore, we thoroughly distinguish the intrinsic differences among underpotential deposition, intercalation, and conventional pseudocapacitance of electrode materials. This review offers a meaningful reference for the construction and fabrication of graphene-based metal oxides as effective photocatalysts for photodegradation study and high-performance optimization of anode materials for LIBs, supercapacitors, and fuel cells.

Preparation of Activated Carbon-Reinforced Composite Beads Based on MnO2/MCM-41@Fe3O4 and Calcium Alginate for Efficient Removal of Tetracycline in Aqueous Solutions

Tetracycline (TC) is a common antibiotic; when untreated TC enters the environment, it will cause a negative impact on the human body through the food chain. In the present study, MnO2/MCM-41@Fe3O4 (FeMnMCM) prepared using a hydrothermal and redox method and Camellia oleifera shell-activated carbon (COFAC) prepared through alkali activation were encapsulated using alginate (ALG) and calcium chloride as a cross-linking matrix to give the composite beads COFAC-FeMnMCM-ALG. The resultant COFAC-FeMnMCM-ALG composite beads were then carefully characterized, showing a high immobilization of MnO2/MCM-41@Fe3O4, with porous COFAC as an effective bioadsorbent for enriching the pollutants in the treated samples. These bead catalysts were subsequently applied to the oxidative degradation of TC in a Fenton oxidation system. Several parameters affecting the degradation were investigated, including the H2O2 concentration, catalyst dosage, initial TC concentration, and temperature. A very high catalytic activity towards the degradation of TC was demonstrated. The electron paramagnetic resonance (EPR) and quenching results showed that ·OH and ·O2- were generated in the system, with ·OH as the main radical species. In addition, the COFAC-FeMnMCM-ALG catalyst exhibited excellent recyclability/reusability. We conclude that the as-prepared COFAC-FeMnMCM-ALG composite beads, which integrate MnO2 and Fe3O4 with bioadsorbents, provide a new idea for the design of catalysts for advanced oxidation processes (AOPs) and have great potential in the Fenton oxidation system to degrade toxic pollutants.

A two dimensional Co(OH)2 catalytic gravity-driven membrane for water purification: a green and facile fabrication strategy and excellent water decontamination performance

Cobalt-based materials are reported to be the most efficient catalysts in sulfate radical advanced oxidation processes (SR-AOPs). A green and facile method was developed in this work to prepare uniform Co(OH)2 hexagonal nanosheets, which was void of any organic solvents via mere ambient temperature stirring. The obtained nanosheets were assembled into a catalytic gravity-driven membrane, through which the removal efficiency of a typical pharmaceutical contaminant, ranitidine (RNTD), could reach ∼100% within 20 min. Meanwhile, the catalytic membrane also demonstrated effective removal performance towards various pollutants. In order to augment the long-term stability of catalytic membranes, Co(OH)2/rGO composites were fabricated using the same strategy, and a Co(OH)2/rGO catalytic membrane was prepared correspondingly. The Co(OH)2/rGO membrane could maintain a ∼100% removal of RNTD over a constant reaction period lasting for up to 165 hours, which was approximately 11 times that of the sole Co(OH)2 membrane (15 h). Analysis of element chemical states, metal ion concentration in filtrates, and quenching experiments suggested that the combination with rGO could promote the electron transfer to accelerate the Co(II) regeneration, restrain the cobalt dissolution to alleviate the active site loss, and contribute to the production of 1O2via synergistic effects of oxygen-containing groups in rGO. Toxicity assessment was performed on RNTD and its degradation intermediates to confirm the reduction in ecotoxicity of the treated feed. Overall, this work not only offered guidance for the application of nanosheets in AOP membranes, but also had implications for the environmentally-friendly preparation protocol to obtain functional metal hydroxides.

Enhanced photo-Fenton degradation of contaminants in a wide pH range via synergistic interaction between 1T and 2H MoS2 and copolymer tea polyphenols/polypyrrole

In this study, we present the successful development of a unique photo-Fenton catalyst, 1T-2H MoS2@TP/PPy (MTP), achieved through the coating of a copolymer of tea polyphenol (TP) and polypyrrole (PPy) onto the surface of heterophase molybdenum disulfide (1T-2H MoS2). This innovative approach involves the integration of hydrothermal synthesis with copolymerization techniques. Our strategy utilizes nanoflower-like 1T-2H MoS2 as the foundational framework, which is then enveloped in TP and PPy copolymer. This innovative approach involves the integration of hydrothermal synthesis with copolymerization techniques. Our strategy utilizes nanoflower-like 1T-2H MoS2 as the foundational framework, which is then enveloped in TP and PPy copolymer. This distinctive architecture demonstrates exceptional catalytic performance owing to the hetero-phase entanglement of 1T-2H MoS2, which provides a diverse array of active sites. The coupled structure of TP and iron (TP-Fe2+/Fe3+) effectively overcome the limitation associated with the iron source. The incorporation of PPy not only reduces the recombination of photogenerated electron-hole pairs but also enhances the stability of 1T-2H MoS2. Remarkably, our experiments on the degradation of methylene blue (MB) and tetracycline (TC) degradation demonstrate that TP-Fe2+/Fe3+ significantly expands the pH applicability range of the MTP composite catalyst. Additionally, we examine several factors, including different catalysts, H2O2 addition, variations in light intensity, solution pH, temperature fluctuations, and the role of active species, to comprehensively understand their impact on the photo-Fenton degradation process. In conclusion, MTP composite exhibits robust catalytic stability and demonstrates a broad pH utilization range in the photo-Fenton oxidation process, highlighting its promising potential for a wide range of applications.

Fabrication of magnetic MnFe2O4@HL composites with an in situ Fenton-like reaction for enhancing tetracycline degradation

Novel magnetic MnFe2O4@honey locust-derived carbon (MnFe2O4@HL) composites were synthesized via an in-situ hydrothermal precipitation method, and were characterized as an excellent Fenton-like catalyst for tetracycline (TC) degradation. Results showed that the vast majority of TC was mineralized in hydrogen peroxide (H2O2)/MnFe2O4@HL system after 120 min of reaction time with 92.3% of removal efficiency and the removal of 71.3% of total organic carbon (TOC). Systematic characterization approaches including scanning electron microscope (SEM), energy-dispersive X-ray spectrometry (EDS), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and vibrating sample magnetometry (VSM) were introduced to reveal the microstructure and properties of magnetic MnFe2O4@HL composites. Hydroxyl radicals (•OH) were identified as the major reactive oxygen species (ROS) via the quenching experiments and electron spin resonance (ESR) analysis, while superoxide radicals (·O2-) played a negligible role. The dual cycles of both Fe3+/Fe2+ and Mn3+/Mn2+ were significant enhanced through the bimetallic redox effect and the electron transfer effect of the carbon-based functional group, accelerating the generation of •OH. The removal of TC was still up to 79.3% after five reuses of magnetic composites, demonstrating the MnFe2O4@HL with excellent stability and reuse performance. The influence of various experimental control conditions involving initial pH, catalyst and H2O2 dosage, temperature, as well as common anions (Cl-, NO3-, and HCO3-) on the degradation of TC were finally evaluated. This study provides an efficient in-situ generation method of emerging magnetic materials, and systematically reveals its mechanism of homogeneous Fenton-like catalysis, which shows promising applications for the degradation of environmental contaminants.

AI-enhanced chemical paradigm: From molecular graphs to accurate prediction and mechanism

The development of accurate and interpretable models for predicting reaction constants of organic compounds with hydroxyl radicals is vital for advancing quantitative structure-activity relationships (QSAR) in pollutant degradation. Methods like molecular descriptors, molecular fingerprinting, and group contribution methods have limitations, as traditional machine learning struggles to capture all intramolecular information simultaneously. To address this, we established an integrated graph neural network (GNN) with approximately 12 million learnable parameters. GNN represents atoms as nodes and chemical bonds as edges, thus transforming molecules into a graph structures, effectively capturing microscopic properties while depicting atom connectivity in non-Euclidean space. Our datasets comprise 1401 pollutants to develop an integrated GNN model with Bayesian optimization, the model achieves root mean square errors of 0.165, 0.172, and 0.189 on the training, validation, and test datasets, respectively. Furthermore, we assess molecular structure similarity using molecular fingerprint to enhance the model's applicability. Afterwards, we propose a gradient weight mapping method for model explainability, uncovering the key functional groups in chemical reactions in artificial intelligence perspective, which would boost chemistry through artificial intelligence extreme arithmetic power.

Safe Disposal of Accident Wastewater in Chemical Industrial Parks Using Non-Thermal Plasma with ZnO-Fe3O4 Composites

Chemical wastewater has a high concentration of toxic and hazardous antibiotic pollutants, which not only devastates the ecological environment and disrupts the ecological balance, but also endangers human health. This research proposed a non-thermal plasma (NTP) combined with a ZnO-Fe3O4 nano-catalyst system to achieve the efficient degradation of ciprofloxacin (CIP) in chemical wastewater. Firstly, ZnO-Fe3O4 composite materials were prepared using hydrothermal method and characterized with scanning electron microscopy (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), etc. With the sole NTP, NTP/ZnO, and NTP/ZnO-Fe3O4 systems, the removal efficiency of CIP can reach 80.1%, 88.2%, and 99.6%, respectively. The optimal doping amount of Fe3O4 is 14%. Secondly, the capture agent experiment verified that ·OH, ·O2-, and 1O2 all have a certain effect on CIP degradation. Then, liquid chromatography-mass spectrometry (LC-MS) was used to detect the intermediate and speculate its degradation pathway, which mainly included hydroxyl addition, hydroxyl substitution, and piperazine ring destruction. After treatment with the NTP/ZnO-Fe3O4 system, the overall toxicity of the product was reduced. Finally, a cyclic experiment was conducted, and it was found that the prepared ZnO-Fe3O4 catalyst has good reusability. The NTP/ZnO-Fe3O4 was also applied in practical pharmaceutical wastewater treatment and has practical applicability.

Boron promoted Fe3+/peracetic acid process for sulfamethazine degradation: Efficiency, role of boron, and identification of the reactive species

In this work, boron (B) was used to promote Fe3+/peracetic acid (Fe3+/PAA) for the degradation of sulfamethazine (SMT). An SMT degradation efficiency of 9.1% was observed in the Fe3+/PAA system over 60 min, which was significantly increased to 99.3% in the B/Fe3+/PAA system over 10 min. The B/Fe3+/PAA process also exhibited superior resistance to natural substances, excellent adaptability to different harmful substances, and good removal of antibiotics in natural fresh water samples. The mechanism of action of boron for Fe3+ reduction was determined using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) spectroscopy, density functional theory (DFT) calculations, and electrochemical tests. The dominant role of •OH was confirmed using quenching experiments, electron spin resonance (EPR) spectroscopy, and quantitative tests. Organic radicals (R-O•) and Fe(IV) also significantly contribute to the removal of SMT. DFT calculations on the reaction between Fe2+ and the PAA were conducted to further determine the contribution from •OH, R-O•, and Fe(IV) from the perspective of thermodynamics and the reaction pathways. Different boron dosages, Fe3+ dosages, and initial pH values were also investigated in the B/Fe3+/PAA system to study their effect of SMT removal and the production of the reactive species. Fe(IV) production determined the kR-O•+Fe(IV) value suggesting that Fe(IV) may play a more important role than R-O•. A comparison of the results with other processes has also proved that the procedure described in this study (B/Fe3+/PAA) is an effective method for the degradation of antibiotics.

Electrochemically enhanced iron oxide-modified carbon cathode toward improved heterogeneous electro-Fenton reaction for the degradation of norfloxacin

In this work, different iron-based cathode materials were prepared using two different approaches: a novel one-step approach, which involved the incorporation of iron oxide with Printex® L6 carbon/PTFE (PL6C/PTFE) on bare carbon felt (CF) and a two-step approach, where iron oxide is deposited onto CF previously modified with PL6C/PTFE. The results obtained from the physical characterization indicated that the presence of iron oxide homogeneously dispersed on the felt fibers with the CF 3-D network kept intact in the one-step approach; whereas the formation of iron oxide aggregates between the felt fibers for material obtained using the two-step approach. Among the iron oxide-based cathodes investigated, the iron-incorporated electrode exhibited the greatest efficiency in terms of the removal and mineralization of norfloxacin (NOR) under neutral pH (complete NOR removal in less than 30 min with around 50% mineralization after 90 min). The findings of this study show that the low cost and simple-to-prepare iron-modified carbon-based materials in HEF process led to the enhanced degradation of organic contaminants in aqueous solutions.

An Investigation of PPy@1T/2H MoS2 Composites with Durable Photothermal-Promoted Effect in Photo-Fenton Degradation of Methylene Blue and in Water Evaporation

MoS2 has garnered considerable attention as an exceptional co-catalyst that is capable of significantly enhancing the efficiency of H2O2 decomposition in advanced oxidation processes (AOPs). This improvement allows for a reduction in the required amounts of H2O2 and Fe2+. In this study, we investigated the cyclic durability of photo-Fenton catalysts, focusing on the degradation of pollutants through the introduction of PPy into heterogeneous 1T-2H MoS2 units. The resulting photothermal-Fenton catalysts, comprising non-ferrous Fenton catalysts, demonstrated excellent degradation performance for simulated pollutants. In comparison with 1T-2H MoS2, the PPy@1T-2H MoS2 composite exhibited remarkable stability and photothermal enhancement in the photo-Fenton degradation of methylene blue (MB) under visible light irradiation. The photo-Fenton reaction efficiently degraded contaminants, achieving 99% removal within 5 min and 99.8% removal within 30 min. Moreover, the co-catalyst complex displayed enhanced cyclic stability during the photo-Fenton reaction, with a contaminant removal efficiency of 92%, even after the 13th cyclic test. The combined effects of PPy and 1T-2H MoS2 demonstrated improved efficiency in both photocatalytic and photo-Fenton catalytic reactions. Furthermore, PPy@1T-2H MoS2 exhibited outstanding performance in the photothermal evaporation of water, achieving an efficiency of 86.3% under one solar irradiation.

High-performance NiO@Fe3O4 magnetic core-shell nanocomposite for catalytic ozonation degradation of pharmaceutical pollution

Pharmaceuticals that are present in superficial waters and wastewater are becoming an ecological concern. Therefore, it is necessary to provide high-performance methods to limit the harmful ecological effects of these materials to achieve a sustainable environment. In this research, NiO@Fe3O4 nanocomposite was prepared by the co-precipitation method and utilized in the catalytic ozonation process for the degradation of 1-cyclopropyl-6-fluoro-4-oxo-7-piperazin-1-yl-quinoline-3-carboxylic acid (ciprofloxacin antibiotic), for the first time. The influencing parameters in the degradation process were analyzed and optimized via response surface methodology (RSM). The optimal ciprofloxacin removal efficiency (100%) was found at pH = 6.5, using 7.5 mg of the NiO@Fe3O4 nanocatalyst and 0.2 g L-1 h-1 ozone (O3) flow, applied over 20 min. Results showed a significant synergistic effect in the analyzed system, which makes the proposed catalytic ozonation process more efficient than using the catalyst and ozone separately. Also, based on the kinetic analysis data, the catalytic ozonation process followed the pseudo-first-order model. In addition, the nanocatalyst showed high recyclability and stability (88.37%) after five consecutive catalytic ozonation process cycles. In conclusion, the NiO@Fe3O4 nanocatalyst/O3 system can be effectively used for the treatment of pharmaceutical contaminants.

Degradation of polyvinyl alcohol (PVA) in neutral conditions based on copper-manganese bimetallic catalyst

There have been many studies on the degradation of polyvinyl alcohol (PVA) by the Fenton-like method, but the narrow acid-base (pH) range, poor degradation effect, and time-consuming of the Fenton-like method limit its development. Therefore, to improve the shortcomings of the Fenton-like method, the study aimed to synthesize copper-manganese bimetal oxide loaded catalysts (MnCuO@γ-Al2O3) through the impregnation calcination method, and its potential to activate hydrogen peroxide (H2O2) for the degradation of PVA was evaluated. The X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer Emmett Teller (BET), energy dispersive spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) characterizations revealed the chemical composition, structure and morphology of the prepared MnCuO@γ-Al2O3, furthermore the synergistic mechanism was proposed. Results indicated that copper and manganese could successfully attach to γ-Al2O3 and reduce the specific surface area of γ-Al2O3, promoting the transformation of multivalent metals and the generation of oxygen vacancies. In addition, comparative experiments demonstrated that the PVA removal efficiency was significantly improved at the catalyst calcination temperature of 500 °C, reaction temperature of 70 °C, H2O2 dosage of 125 [Formula: see text], and catalyst dosage of 625 [Formula: see text] and more than 96% of PVA was removed within 20 min in neutral conditions. Lastly, four catalyst cycle degradation experiments of PVA were carried out, and the degradation effect could reach more than 96% in a certain time.

A chemodynamic nanoenzyme with highly efficient Fenton reaction for cancer therapy

Chemodynamic therapy (CDT) is a rising technology for cancer therapy by converting intracellular hydrogen peroxide (H2O2) into hydroxyl radical (•OH) via transition-metal-containing nanoparticles (NPs) catalysis reaction (i.e. Fenton reaction) to kill tumor cells. Highly efficient Fenton reaction and favorable delivery of the catalytic NPs 'nanoenzyme' are the key for successful treatment of cancer. In this work, we developed a novel nanoenzyme MnFe2O4@GFP forin vitroandin vivoantitumor therapy. A new MnFe2O4nanoparticle containing two transition-metal-element Fe and Mn was synthesized for enhanced Fenton reaction and used to co-deliver protein with high biocompatibility through post-modification with dopamine polymerization, green fluorescent protein adsorption, and PEG coating. The enrichment of H2O2and glutathione (GSH) in tumor tissue provided a favorable microenvironment forin situgeneration of toxic free radicals. Fe3+and GSH triggered a redox reaction to produce Fe2+, which in turn catalyzed H2O2into •OH, with the consumption of antioxidant GSH. By combining Fe3+with another catalyzer, the catalytic efficiency of the nanoenzyme were greatly improved. Consequently, the nanoenzyme showed efficient antitumor ability bothin vitroandin vivo. Thus, the multifunctional CDT nanoenzyme platform shows great promising for antitumor therapy through the combination of catalyzers Fe3+and Mn2+and codelivery of protein cargo.

Various strategies applied for the removal of emerging micropollutant sulfamethazine: a systematic review

Pharmaceutical active drug(s) especially sulfamethazine (SMZ) is considered as one of the major emerging microcontaminants due its long-term existence in the environmental system and that can influence on the developmental of antibacterial resistance genes. Because of this region it has a great concern in the aquatic system. Moreover, the vast utilization of SMZ, excretion of undigested portion by animals and also through dumping or mishandling, SMZ is frequently detected in various samples (including water) of different places and its surroundings. Additionally, reports shown it has toxic effect against microalgae and mice. Thus, that can lead to several investigators, focusing on removal of SMZ alone or in combination of other drugs in wastewater treatment plants (WWTPs) either by abiotic and/or biotic treatment methods. The present review provides an overview of the toxic effect of SMZ and SMZ degradation/removal in abiotic and biotic processes. Finally, reveals the need of further implication of integrated treatments (including engineered biological mediators) to understand ideal biological approaches for the mineralization of SMZ.

B-doping mediated formation of oxygen vacancies in Bi2Sn2O7 quantum dots with a unique electronic structure for efficient and stable photoelectrocatalytic sulfamethazine degradation

This study devised a straightforward one-step approach that enabled simultaneous boron (B) doping and oxygen vacancies (OVs) production on Bi₂Sn₂O₇ (BSO) (B-BSO-OV) quantum dots (QDs), optimizing the electrical structure of the photoelectrodes. Under light-emitting diode (LED) illumination and a low potential of 1.15 V, B-BSO-OV demonstrated effective and stable photoelectrocatalytic (PEC) degradation of sulfamethazine (SMT), achieving the first-order kinetic rate constant of 0.158 min^-1. The surface electronic structure, the different factors influencing the PEC degradation of SMT, and the degradation mechanism were studied. Experimental studies have shown that B-BSO-OV exhibits strong visible light trapping ability, high electron transport ability, and superior PEC performance. DFT calculations show that the presence of OVs on BSO successfully reduces the band gap, controls the electrical structure, and accelerates charge transfer. This work sheds light on the synergistic effects of the electronic structure of B-doping and OVs in heterobimetallic oxide BSO under the PEC process and offers a promising approach for the design of photoelectrodes.

Controllable synthesis of copper-organic frameworks via ligand adjustment for enhanced photo-Fenton-like catalysis

The efficient heterogeneous photo-Fenton-like catalysts based on two secondary ligand-induced Cu(II) metal-organic frameworks (Cu-MOF-1 and Cu-MOF-2) were constructed for the first time and investigated for the degradation of multiple antibiotics. Herein, two novel Cu-MOFs were prepared using mixed ligands by a facile hydrothermal method. The one-dimensional (1D) nanotube-like structure could be obtained by using V-shaped, long and rigid 4,4'-bis(3-pyridylformamide)diphenylether (3-padpe) ligand in Cu-MOF-1, while polynuclear Cu cluster could be prepared more easily by using short and small isonicotinic acid (HIA) ligand in Cu-MOF-2. Their photocatalytic performances were measured by degradation of multiple antibiotics in Fenton-like system. Comparatively, Cu-MOF-2 exhibited superior photo-Fenton-like performance under visible light irradiation. The outstanding catalytic performance of Cu-MOF-2 was ascribed to the tetranuclear Cu cluster configuration and excellent ability of photoinduced charge transfer and hole separation thus improved the photo-Fenton activity. In addition, Cu-MOF-2 showed high photo-Fenton activity in wide pH working range 3-10 and maintained wonderful stability after five cyclic experiments. The degradation intermediates and pathways were deeply studied. The main active species h⁺, O₂^- and OH worked together in photo-Fenton-like system and possible degradation mechanism was proposed. This study provided a new approach to design the Cu-based MOFs Fenton-like catalysts.

FeMo@porous carbon derived from MIL-53(Fe)@MoO3 as excellent heterogeneous electro-Fenton catalyst: Co-catalysis of Mo

An ultra-efficient electro-Fenton catalyst with porous carbon coated Fe-Mo metal (FeMo@PC), was prepared by calcining MIL-53(Fe)@MoO₃. This FeMo@PC-2 exhibited impressive catalytic performance for sulfamethazine (SMT) degradation with a high turnover frequency value (7.89 L/(g·min)), much better than most of reported catalysts. The mineralization current efficiency and electric energy consumption were 83.2% and 0.03 kWh/g_TOC, respectively, at low current (5 mA) and small dosage of catalyst (25.0 mg/L). The removal rate of heterogeneous electro-Fenton (Hetero-EF) process catalyzed by FeMo@PC-2 was 4.58 times that of Fe@PC/Hetero-EF process. Because the internal-micro-electrolysis occurred between PC and Fe⁰, while the co-catalysis of Mo accelerated the rate-limiting step of the Fe³⁺/Fe²⁺ cycle and greatly improved the H₂O₂ utilization efficiency. The results of radical scavenger experiments and electron paramagnetic resonance confirmed the main role of surface-bound hydroxyl radical oxidation. This process was feasible to remove diverse organic contaminants such as phenol, 2,4-dichlorophenoxyacetic acid, carbamazepine and SMT. This paper enlightened the importance of the doped Mo, which could greatly improve the activity of the iron-carbon heterogeneous catalyst derived from metal-organic frameworks in EF process for efficient removal of organic contaminants.

Enhanced activity of Fe/Mn nanoparticles using a response surface methodology and mechanism for removing oxytetracycline and copper ion

As feed additives, oxytetracycline (OTC) and copper ion (Cu(II)) are often detected in livestock and poultry farming wastewater. To address this issue, firstly, the synthesis conditions of Fe/Mn nanoparticles (Fe/Mn NPs) were initially optimized using a response surface methodology (RSM) to yield highly active Fe/Mn NPs, where the application of RSM significantly increased the Fe/Mn NPs' efficiency in removing co-contamination OTC and Cu(II),respectively, from 45.8 to 86.2% and 14.9-67.2%. Secondly, scanning electron microscope and Nitrogen adsorption-desorption isotherms results showed that Fe/Mn NPs were composed of elliptic particles between 20 and 40 nm, a specific surface area of 59.5 m² g^-1, and a mean pore diameter of 5.27 nm. Fourier infrared spectrometer and X-ray photoelectron spectroscopy analysis revealed that amino, carboxyl and hydroxyl functional groups existed on the surface. Zeta potential indicated that Fe/Mn NPs maintained a high negative charge density between pH 1 and 11. These surface properties possessed by the green synthesized Fe/Mn NPs resulted in high adsorption efficiency for co-contamination OTC and Cu(II). Based on this, a removal mechanism based on a combination of complex-bridging effect, pore-filling, hydrogen bonding, surface complexation, ion exchange and electrostatic attraction was proposed. Finally, the assessment of Fe/Mn NPs used in swine wastewater demonstrated that both 99.9% OTC and 55.6% Cu(II) were removed.

Reductive Oligomerization of Nitroaniline Catalyzed by Fe3O4 Spheres Decorated with Group 11 Metal Nanoparticles

The present work demonstrates a simple and sustainable method for forming azo oligomers from low-value compounds such as nitroaniline. The reductive oligomerization of 4-nitroaniline was achieved via azo bonding using nanometric Fe₃O₄ spheres doped with metallic nanoparticles (Cu NPs, Ag NPs, and Au NPs), which were characterized by different analytical methods. The magnetic saturation (M _s) of the samples showed that they are magnetically recoverable from aqueous environments. The effective reduction of nitroaniline followed pseudo-first-order kinetics, reaching a maximum conversion of about 97%. Fe₃O₄-Au is the best catalyst, its a reaction rate (k _Fe3O4-Au = 0.416 mM L^-1 min^-1) is about 20 times higher than that of bare Fe₃O₄ (k _Fe3O4 = 0.018 mM L^-1 min^-1). The formation of the two main products was determined by high-performance liquid chromatography-mass spectrometry (HPLC-MS), evidencing the effective oligomerization of NA through N = N azo linkage. It is consistent with the total carbon balance and the structural analysis by density functional theory (DFT)-based total energy. The first product, a six-unit azo oligomer, was formed at the beginning of the reaction through a shorter, two-unit molecule. The nitroaniline reduction is controllable and thermodynamically viable, as shown in the computational studies.

Enhanced H2O2 utilization efficiency in Fenton-like system for degradation of emerging contaminants: Oxygen vacancy-mediated activation of O2

Hydrogen peroxide (H₂O₂) is the most commonly used oxidant in advanced oxidation processes for emerging organic contaminant degradation. However, the activation of H₂O₂ to generate reactive oxygen species is always accompanied by O₂ generation resulting in H₂O₂ waste. Here, we prepare a Ti doped Mn₃O₄/Fe₃O₄ ternary catalyst (Ti-Mn₃O₄/Fe₃O₄) to create abundant oxygen vacancies (OVs), which yields electron delocalization impacts on enhancing the electrical conductivity, accelerating the activation of O₂ to produce H₂O₂. In Ti-Mn₃O₄/Fe₃O₄/H₂O₂ system, OVs-mediated O₂/O₂^•-/H₂O₂ redox cycles trigger the activation of locally generated O₂, boost the regeneration of O₂^•- and on site produce H₂O₂ for replenishment. This leads to a 100% removal of tiamulin in 30 min at an unprecedented H₂O₂ utilization efficiency of 96.0%, which is 24 folds higher than that with Fe₃O₄/H₂O₂. Importantly, further integration of Ti-Mn₃O₄/Fe₃O₄ catalysts into membrane filtration achieved high rejections of tiamulin (> 83.9%) from real surface water during a continuous 12-h operation, demonstrating broad pH adaptability, excellent catalytic stability and leaching resistance. This work demonstrates a feasible strategy for developing OVs-rich catalysts for improving H₂O₂ utilization efficiency via activation of locally generated oxygen during the Haber-Weiss reaction.

Carbon-Based Nanomaterials for Catalytic Wastewater Treatment: A Review

Carbon-based nanomaterials (CBM) have shown great potential for various environmental applications because of their physical and chemical properties. The unique hybridization properties of CBMs allow for the tailored manipulation of their structures and morphologies. However, owing to poor solar light absorption, and the rapid recombination of photogenerated electron-hole pairs, pristine carbon materials typically have unsatisfactory photocatalytic performances and practical applications. The main challenge in this field is the design of economical, environmentally friendly, and effective photocatalysts. Combining carbonaceous materials with carbonaceous semiconductors of different structures results in unique properties in carbon-based catalysts, which offers a promising approach to achieving efficient application. Here, we review the contribution of CBMs with different dimensions, to the catalytic removal of organic pollutants from wastewater by catalyzing the Fenton reaction and photocatalytic processes. This review, therefore, aims to provide an appropriate direction for empowering improvements in ongoing research work, which will boost future applications and contribute to overcoming the existing limitations in this field.

Pre-treatment of real pharmaceutical wastewater by heterogeneous Fenton and persulfate oxidation processes

This study compares the pre-oxidation of pharmaceutical wastewater by hydroxyl radical based advanced oxidation (HR-AOP) and a sulfate radical based advanced oxidation process (SR-AOP). The heterogeneous Fenton process is chosen as a model HR-AOP and persulfate (PS) activation as a model SR-AOP. The pre-treatment efficacy of both processes in terms of TOC, and COD removals using Fe₃O₄-rGO catalyst were considered. Under the investigated experimental conditions, both processes yielded fluctuating COD values with time. The heterogeneous Fenton process discovered to be the most efficient to remove 68.7% TOC in 180 min of treatment, when Fe₃O₄-rGO: H₂O₂ = 300 mg L^-1:150 mM H₂O₂ was used at pH 3. Notably, the heterogeneous Fenton system was not considerably inhibited at the natural pH of pharmaceutical wastewater (6.75), as the process successfully removed 64.6% TOC. On the other hand, in persulfate activation studies, Fe₃O₄-rGO: PS = 400 mg L^-1: 5 mM was the ideal condition for removing 59.5% TOC in 180 min at pH 3. Whereas the natural pH condition significantly inhibited the TOC removal, as only 20.8% TOC removal was feasible. The wastewater characterisation before and after Fenton treatment reveals that Fenton oxidation leads to an increase in inorganics (chlorides: 160 ± 15 mg L^-1, nitrates: 63.14 ± 3.08 mg L^-1, sulfates: 266.31 ± 31.39 mg L^-1) necessitating an additional treatment step to reduce COD and inorganics further.

Spontaneous intra-electron transfer within rGO@Fe2O3-MnO catalyst promotes long-term NOx reduction at ambient conditions

Iron (Fe)-based catalysts are widely used for taming nitrogen oxides (NO_x) containing flue gas, but the regeneration and long-term reusability remains a concern. The reusability can be acquired by external additives, and resultantly can not only increase the cost but can also add to process complexity as well as secondary pollutants. Herein, a self-sustainable material is designed to regenerate the catalyst for long-term reusability without adding to process complexity. The catalyst is based on reduced graphene-oxide impregnated by Fe₂O₃-MnO (rGO@Fe₂O₃-MnO; G-F-M) for spontaneous intra electron (e^-)-transfer from Mn to Fe. The developed catalyst; G-M-F exhibited 93.7% NO_x reduction, which suggests its high catalytic activity. The morphological and structure characterizations confirmed the Fe/Mn loading, contributing to e^--transfer between Mn and Fe due to its conductivity. The synthesized G-F-M showed higher NO_x reduction about 2.5 folds, than rGO@Fe₂O₃ (G-FeO) and rGO@MnO_x (G-MnO_x). The performance of G-M-F without and with an electrochemical system was also compared, and the difference was only 5%, which is an evidence of the spontaneous e^- transfer between the Mn and Fe-NO_x complex. The designed catalyst can be used for a long time without external assistance, and its efficiency was not affected significantly (<3.7%) in the presence of high oxygen contents (8%). The as-prepared G-M-F catalyst has great potential for executing a dual role NOx removal and self-regeneration of catalyst (SRC), promoting a sustainable remediation approach for large-scale applications.

Degradation of carbamazepine over MOFs derived FeMn@C bimetallic heterogeneous electro-Fenton catalyst

A highly efficient heterogeneous electro-Fenton (Hetero-EF) catalyst with core-shell structure was successfully prepared by calcination of Mn-doped Mil-53 (Fe) precursor at high temperature. FeMn@C-800/2 prepared at pyrolysis temperature of 800 °C and Fe:Mn molar doping ratio of 2:1 showed the best catalytic performance for the degradation of carbamazepine (CBZ). The characterization, properties and stability of FeMn@C-800/2 were systematically investigated, obtaining the apparent first-order reaction rate of Hetero-EF was 8.9 and 17.8 times higher than that on Fe@C-800 and Mn@C-800 at the optimized conditions of current density 10 mA cm^-2, catalyst dosage of 50 mg L^-1 and initial pH 4.0, respectively. The incorporation of Mn promoted the generation of more Fe⁰ and Fe₃C during the pyrolysis process, and enhanced the internal micro-electrolysis between Fe⁰ and carbon shell. At the same time, the presence of Mn⁰ also promoted the regeneration of Fe²⁺, and improved the activity of iron-carbon heterogeneous catalysis in the EF process, so as to degrade organic pollutants more effectively. This work would help to gain insight into the design of MOFs derived Fe-Mn bimetal catalyst and its mechanism for enhanced heterogeneous electro-Fenton.

Systematic and Bibliometric Analysis of Magnetite Nanoparticles and Their Applications in (Biomedical) Research

Recent reports show air pollutant magnetite nanoparticles (MNPs) in the brains of people with Alzheimer's disease (AD). Considering various field applications of MNPs because of developments in nanotechnology, the aim of this study is to identify major trends and data gaps in research on magnetite to allow for relevant environmental and health risk assessment. Herein, a bibliometric and systematic analysis of the published magnetite literature (n = 31 567) between 1990 to 2020 is completed. Following appraisal, publications (n = 244) are grouped into four time periods with the main research theme identified for each as 1990-1997 "oxides," 1998-2005 "ferric oxide," 2006-2013 "pathology," and 2014-2020 "animal model." Magnetite formation and catalytic activity dominate the first two time periods, with the last two focusing on the exploitation of nanoparticle engineering. Japan and China have the highest number of citations for articles published. Longitudinal analysis indicates that magnetite research for the past 30 years shifted from environmental and industrial applications, to biomedical and its potential toxic effects. Therefore, whilst this study presents the research profile of different countries, the development in research on MNPs, it also reveals that further studies on the effects of MNPs on human health is much needed.

New insights into the degradation and detoxification of methylene blue using heterogeneous-Fenton catalyzed by sustainable siderite

The huge application of synthetic dyes caused a severe impact in the environment. In the present study, a physico-chemical strategy of heterogeneous-Fenton catalyzed by the natural ferrous ore has been established for toxic chemical degradation, of which the complex and high-expense repetitive pH adjustment procedures were escaping. And this natural heterogeneous catalyst also could be recycled and sustainable for toxic substances treatment involved in synergetic adsorption and oxidation. The siderite, served as an adsorbent and catalyst for the degradation of methylene blue (MB). Siderite exhibited a better adsorption capacity with a saturated adsorption capacity of ∼11.08 mg/g. Batch adsorption experiments have verified that adsorption rate and adsorption equilibrium followed pseudo-second-order rate model and Langmuir isotherm equation, respectively. The combination with H₂O₂, showed significant enhancement of MB degradation without any pH adjustment. The effect of siderite dosage, H₂O₂ dosage, MB concentration, initial pH, and reaction temperature on MB degradation was investigated, which also has indicated the excellent catalytic performance of siderite. About 99.71% of MB was degraded in 480 min with initial pH of 7.0, reaction temperature of 25 °C, siderite, and H₂O₂ dosage of 2.5 g/L and 122.38 mM, respectively. It was found that siderite could be reused and remained high degradation efficiency on MB after 5 times reutilization, which also could demonstrate the sustainable and effective process to degrade organic pollution. The generation of reactive species including ·OH and O2·- have been confirmed based on scavenger test and electron spin resonance (ESR) analysis, which was dominated by heterogeneous reaction. The possible degradation mechanisms of MB have been predicted based on spectrum scanning and GC-MS analysis. Moreover, acute toxicity assessment with marine photobacterium Vibrio fisheri was conducted to investigate the toxicity change in the adsorption/oxidation coupled process. This sustainable heterogeneous-Fenton technology has been verified as a promising and applicable process for toxic organic chemicals removal due to effective mineralization and detoxification assisted with the natural ore mineral through the simple operation and mild condtions.

Enhanced Heterogeneous Fenton-like Process for Sulfamethazine Removal via Dual-Reaction-Center Fe-Mo/rGO Catalyst

A heterogeneous Fenton-like catalyst with single redox site has a rate-limiting step in oxidant activation, which limited its application in wastewater purification. To overcome this, a bimetallic doping strategy was designed to prepare a heterogeneous Fenton-like catalyst (Fe-Mo/rGO) with a double-reaction center. Combined with electrochemical impedance spectroscopy and density functional theory calculation, it was confirmed that the formation of an electron-rich Mo center and an electron-deficient Fe center through the constructed Fe-O-Mo and Mo-S-C bonding bridges induced a higher electron transfer capability in the Fe-Mo/rGO catalyst. The designed Fe-Mo/rGO catalyst exhibited excellent sulfamethazine (SMT) degradation efficiency in a broad pH range (4.8-8.4). The catalytic performance was hardly affected by inorganic anions (Cl^-, SO₄^2- and HCO₃^-) in the complicated and variable water environment. Compared to Fe/rGO and Mo/rGO catalysts, the SMT degradation efficiency increased by about 14.6 and 1.6 times in heterogeneous Fenton-like reaction over Fe-Mo/rGO catalyst. The electron spin resonance and radical scavenger experiments proved that ·O₂^-/HO₂· and ¹O₂ dominate the SMT removal in the Fe-Mo/rGO/H₂O₂ system. Fe and Mo, as active centers co-supported on rGO, significantly enhanced the electron transfer between catalyst, oxidant, and pollutants, which accelerated the reactive oxygen species generation and effectively improved the SMT degradation. Our findings offer a novel perspective to enhance the performance of heterogeneous Fenton-like catalysts by accelerating the electron transfer rate in the degradation of organic pollutants.

Novel heterostructured metal doped MgFe2O4@g-C3N4 nanocomposites with superior photo-Fenton preformance for antibiotics removal: One-step synthesis and synergistic mechanism

A novel metal doped MgFe₂O₄@g-C₃N₄ (m-MF@CN) nanocomposite was synthesized by one-pot method using saprolite laterite nickel ore and urea as raw materials. The heterostructure was verified as an effective heterogeneous Fenton-like catalyst for degrading antibiotics including tetracycline, oxytetracycline and chlortetracycline hydrochloride, and the related catalytic mechanism was elaborated in detail. Under the optimum conditions, the m-MF@CN/H₂O₂/vis system exhibited superior photo-Fenton property (degradation efficiency of 93.15% within 30 min, TOC removal efficiency was as high as 60.54% within 120 min) and cycle stability for tetracycline removal. The combination of MgFe₂O₄ and g-C₃N₄ enhanced the absorption of visible light, and the energy level matched heterojunction promoted the separation of photogenerated electron-holes to accelerate the redox cycle of ≡Fe³⁺/≡Fe²⁺. Free radical quenching and electron spin resonance (ESR) analysis confirmed that O₂^- was the main active species, h⁺ and OH also played a synergistic role in the degrading reactions. Notably, a possible degradation pathway of tetracycline was proposed according to the intermediates produced in the reaction process. The one-step synthesized m-MF@CN nanocomposite catalysts possessed high catalytic performance, good stability and recoverability, which not only realized the high-value utilization of ore raw materials, but also provided a potential practical way for efficient treatment of antibiotic wastewater.