Applications and factors influencing of the persulfate-based advanced oxidation processes for the remediation of groundwater and soil contaminated with organic compounds

A comprehensive review of soil remediation contaminated by persistent organic pollutants using electrokinetic: Challenging enhancement techniques

The hydrophobic, hard-to-naturally-decompose compounds, including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and pesticides, are categorized as persistent organic pollutants (POPs). POPs are toxic/hazardous and present serious risks to human health. Electrokinetic (EK) remediation is highly flexible and cost-effective, suitable for both in-situ and ex-situ applications. It effectively targets a wide range of contaminants, including metals and organic compounds, especially in low-permeability and low-hydraulic conductivity soils, where traditional methods are less effective. This technology is easy to install and can be combined with other strategies for enhanced remediation in complex soil environments. This paper underscores EK remediation as a promising method for addressing soil pollution caused by these organic pollutants, especially in low-permeability soil. The present review starts with the classification, toxicity effects, and source of POPs in the environment. Theoretical aspects and fundamentals of EK, including transport mechanisms and principles, are also reviewed. The theoretical underpinnings of effective factors are comprehensively explored, such as surface charge, zeta potential, pHpzc, and numerical modeling of transport fluxes. Moreover, a comprehensive examination is undertaken regarding the operation and design considerations of the EK process, encompassing factors like pH, electrode arrangement, electrolyte, and voltage. Subsequently, it is highlighted that EK has the potential to come in synergistically in contact with other remediation technologies to augment the POPs' degradation. Various enhancement techniques are also explored, including solvent extraction, chemical oxidation, bioremediation, and permeable reactive barriers to combine with EK. Each method is examined in terms of its advantages, limitations, recent developments, and ongoing research. Finally, the potential and challenges associated with enhanced EK methods combined with other techniques for the removal of POPs were reviewed.

Direct current driven persulfate delivery and activation for heterogeneous porous media remediation: Coupling effects of electric-thermal-chemical-flow fields

Direct current (DC) has promising potential for persulfate delivery and activation in heterogeneous site remediation, yet requires deeper understanding. Here, we investigated the efficiency of DC for persulfate delivery and activation and compared with alternating current (AC). While AC electric field only influenced persulfate fate by Joule heating effect, DC electric field induced electrokinetic migration of persulfate and contaminants, as well as promoted persulfate activation with Joule heating and electrochemical reactions. DC system achieved 95 % MCB removal which was 3.1 times of that in AC system using the same voltage input (60 V) with a velocity of 0.5 m/d. When the applied DC voltage increased from 20 V to 60 V (0.5-1.5 V/cm), persulfate activation pathway changed from electrode reactions to the coupled activation pathways of electrode, chemical and heat reactions, thus resulting in increasing MCB removal efficiency from 57 % (20 V) to 95 % (40 V and 60 V). The energy consumption with 40 V (11.6 kWh/g) was 2.6 times of that using 20 V (4.4 kWh/g), and dramatically increased to 11.7 times with 60 V (50.2 kWh/g). This study provides a new perspective on improving the efficiency of persulfate delivery and activation in heterogeneous sites remediation using DC-driven system.

Efficient degradation of bisphenol A and amino black 10B by magnetic composite Fe3O4@MOF-74 as catalyst

Metal-organic frameworks (MOFs) exhibit high chemical stability and porosity, and have been widely applied in various fields including selective adsorption and separation, sensors, and catalysis. When combined with Fe3O4, they effectively address issues such as aggregation of Fe3O4 particles and the difficulty in recovering MOFs as catalysts. Therefore, in this study, we used a simple solvothermal method as a catalyst to synthesize a high specific surface area magnetic composite Fe3O4@MOF-74, which was used to catalyze the degradation of bisphenol A (BPA) and amino black 10B in wastewater. We activated Na2S2O8 to generate radicals for oxidizing and degrading BPA and amino black 10B. Experimental results showed that at 35 °C, with Fe3O4@MOF-74 (Fe3O4: MOF-74=1:1) concentration of 0.2 g/L and Na2S2O8 concentration of 2 g/L, the catalytic effect is efficient and economical. Meanwhile, removal rates of BPA and amino black 10B exceeded 95.58 % over a broad pH range (pH 3-9). Furthermore, even after multiple cycles of use, Fe3O4@MOF-74 maintained catalytic degradation rates of BPA and amino black 10B above 93.24 % and 95.01 %, respectively. Additionally, in water samples, removal rates of BPA and amino black 10B exceeded 91.55 %. This study provides a new and efficient catalyst material for wastewater treatment, which is expected to play an important role in environmental remediation.

Ultra-efficient peroxymonosulfate utilization and trichloroethylene degradation in heterogeneous catalytic system guided by sheet-like Cu2MnO4 nanoparticles: The role of Cu(III)-O species and free radicals

Synthesizing cubic spinel Cu2MnO4 with nanosheet structure (SCMO) aimed to construct a "non-radical-mediated radical-oxidative reaction", for increasing PMS utilization efficiency, and solving the defects of SO4•- and •OH through indirect PMS activation by electron transfer process. Compared with box-like Cu2MnO4 (11.1%, 0.0035 min-1) and ordinary Cu2MnO4 nanoparticles (21.3%, 0.0070 min-1), SCMO/PMS showed excellent trichloroethylene removal (98.8%, 0.1577 min-1). The pivotal role of Cu(III) was determined based on EPR analysis, quenching experiments, chemical probe experiments, hydrogen temperature-programmed reduction and Raman spectroscopy analysis, in-situ FTIR and Raman analyses. In brief, the interaction between PMS and SCMO could produce surface-bonded reactive complexes and the subsequent breaking of O-O bond in the sub-stable structure allowed the conversion of Cu(II) to Cu(III), which in turn facilitates the generation of •OH and SO4•-. The density functional theory (DFT) calculations provided supporting evidence for the electron donor role of SCMO and the increase of the electron acceptance capacity of PMS. SCMO/PMS system showed good resistance and degradation efficiency to complex composition and combined pollutants in actually contaminated groundwater, respectively. However, the coexistence of high concentrations of arsenic could significantly affect SCMO performance due to their adsorption on -OH groups, which still need in-depth study.

Plasma catalysis. A study of the influence of oxysulfur, SOx• species through the degradation of sulfonated dyes by non-thermal plasma

This work studied the degradation reaction of sulfonated dyes, indigo carmine, phenol red, and their mixtures by non-thermal plasma (NTP). Interestingly, the degradation rate constant showed a faster process and lower activation energy (Ea) for the dye mixtures than for the degradation reaction of the individual dyes. This unexpected result opened up new opportunities for understanding plasma chemistry and the interaction between reactive species formed by the plasma and the target molecule. As no catalyst or chemical additive was added to the reactor, the decrease in Ea came from a self-synergistic effect (SSE), through the dye molecules fragmentation, which resulted in plasma catalysis. The hypothesis proposed in this work is that oxysulfur (SOx) species are formed by the desulfonation reaction of dyes. The sulfonic groups (SO3) present in the chemical structures of dyes can function as precursors for forming several SOx•- species. Studies based on oxygenated sulfonated species such as SO3•-, SO4•- and SO5•- have been widely applied in advanced oxidative and reductive processes due to their satisfactory efficiency and low cost. Among them, SO4•- is the key reactive species with the best performance in the degradation of pollutants due to its high oxidation potential (E° = 2.60 V). In addition, it is an alternative source of HO• in aqueous media, improving the oxidation reaction. In order to elucidate the SSE, the kinetic process was followed by UV-Vis analysis, and the reactive species, such as alkyl, hydroxyl, and oxy-sulfur radicals were identified by Electron Paramagnetic Resonance. The by-products of the NTP degradation reaction were analyzed by ultrafast liquid chromatography coupled with a mass spectrometer, and a fragmentation route was proposed.

Remediation of phenanthrene contaminated soil by persulphate coupled with Pseudomonas aeruginosa GZ7 based on oxidation prediction model

Chemical oxidation coupled with microbial remediation has attracted widespread attention for the removal of polycyclic aromatic hydrocarbons (PAHs). Among them, the precise evaluation of the feasible oxidant concentration of PAH-contaminated soil is the key to achieving the goal of soil functional ecological remediation. In this study, phenanthrene (PHE) was used as the target pollutant, and Fe2+-activated persulphate (PS) was used to remediate four types of soils. Linear regression analysis identified the following important factors influencing remediation: PS dosage and soil PHE content for PHE degradation, Fe2+ dosage, hydrolysable nitrogen (HN), and available phosphorus for PS decomposition. A comprehensive model of "soil characteristics-oxidation conditions-remediation effect" with a high predictive accuracy was constructed. Based on model identification, Pseudomonas aeruginosa GZ7, which had high PAHs degrading ability after domestication, was further applied to coupling repair remediation. The results showed that the optimal PS dose was 0.75% (w/w). The response relationship between soil physical, chemical, and biological indicators at the intermediate interface and oxidation conditions was analysed. Coupled remediation effects were clarified using microbial diversity sequencing. The introduction of Pseudomonas aeruginosa GZ7 stimulated the relative abundance of Cohnella, Enterobacter, Paenibacillus, and Bacillus, which can promote material metabolism and energy transformation during remediation.

0D/2D dual Fenton α-Fe2O3/Fe-doped g-C3N4 photocatalyst and the synergistic photo-Fenton catalytic mechanism insight

A novel dual Photo-Fenton photocatalyst Fe2O3-Fe-CN with excellent Fe(III)/Fe(II) conversion efficiency and trace metal ion leaching rate has been fabricated by in-situ deposition of α-Fe2O3 quantum dots on ultrathin porous Fe-doped carbon nitride (Fe-CN) nanosheets. The iron species in Fe-CN and α-Fe2O3 QDs constitute a mutually reinforcing dual Photo-Fenton effect. The 4% Fe2O3-Fe-CN showed superior performance with kobs values 8.60 and 4.80 folders greater than pure CN and Fe-CN, respectively. The synergistic effect between α-Fe2O3 QDs and the ultrathin porous structure of Fe-CN is the primary reason for the outstanding catalytic performance exhibited by α-Fe2O3/Fe-CN. On one hand, the ultrathin porous structure of Fe-CN promotes the rapid transfer of photogenerated electrons. On the other hand, the efficient photogenerated charge separation at the α-Fe2O3/Fe-CN interface enables more photogenerated electrons to participate in the Fe3+/Fe2+ conversion and H2O2 activation. The trapping experiments demonstrate that •OH and •O2- are the primary active species in TC degradation. This work presents novel insights into the design of efficient heterogeneous Fenton catalysts for practical applications.

Vitamin C-regulated CoAl- layered double hydroxide with oxygen vacancies to efficiently activate peroxydisulfate for sulfamethoxazole removal triggered via reactive oxygen and high-valent cobalt species

In this study, a vitamin C-regulated CoAl-layered double hydroxide with abundant oxygen vacancies was synthesized via a simple hydrothermal process. The resulting CoAl-layered double hydroxide was employed to activate peroxydisulfate for removal of sulfamethoxazole. The effect of the experimental parameters such as pH, catalyst dose and peroxydisulfate concentration on sulfamethoxazole removal was investigated. The current system exhibited excellent catalytic performance for sulfamethoxazole removal in a broad pH range (i.e., pH 3.0-11.0). Under the optimized condition, 94.2% of sulfamethoxazole was degraded within 15 min, accompanied by a 67.6% reduction in chemical oxygen demand. The effective sulfamethoxazole degradation could be attributed to four pathways. Firstly, the ≡ Co2+ in catalyst reacted with peroxydisulfate to generate reactive species, including SO4•-, •OH, O2•- and 1O2, which could degrade sulfamethoxazole. Secondly, the oxygen vacancies could modulate intrinsic electrons, resulted in the surface activation of catalyst and accelerated charge transfer, which was favorable for the degradation of sulfamethoxazole. Thirdly, the presence of vitamin C not only promoted the formation of oxygen vacancies but also expanded the interlayer spacing of layered double hydroxide. A large interlayer spacing facilitated the diffusion of peroxydisulfate and pollutants in the interlayer and improved the utilization efficiency of the active site. Lastly, the high-valent cobalt species exhibited excellent oxidation ability and enhanced the catalyst performance through continuously being employed as an electron acceptor. This study provided a valuable insight for the design and application of Co-based catalysts in peroxydisulfate-based advanced oxidation processes.

Larger aggregate formed by self-assembly process of the mixture surfactants enhance the dissolution and oxidative removal of non-aqueous phase liquid contaminants in aquifer

Surfactants can transfer non-aqueous phase liquid (NAPL) contaminants to the aqueous phase, and enhance the removal of the latter in groundwater. However, the extensive use of surfactants causes secondary contamination and increases the non-target consumption of oxidants. It is pressing to develop a surfactant with high phase transfer efficiency and sound compatibility with oxidants to minimize the use of surfactants for groundwater remediation. The phase transfer capability of different surfactants and their binary mixtures, their enhanced KMnO4 oxidation performance for NAPL contaminants as well as influencing factors were investigated to solve the above-mentioned question. The results showed that Tween20, SDBS and BS-12 perform best in terms of phase transfer capability among nonionic, anionic and amphoteric surfactants respectively, and only SDBS and BS-12 produce a synergistic effect among the binary mixtures. The CMC of SDBS/BS-12 was lower than its ideal CMC value, and the self-assembly process of SDBS/BS-12 also formed larger aggregates, which improved the phase transfer performance. Compared to other single surfactants, the removal efficiency of petroleum hydrocarbons in the aquifer sediments was raised by 7.4-33.8 % using the mixed surfactant. The SDBS/BS-12 mixture was compatible with KMnO4 and boosted the reaction of NAPL contaminants with KMnO4 by transferring from the NAPL phase to the aqueous phase. As a result, the NAPL toluene and phenanthrene removal efficiency increased from 37 % and 29 % to 80 % and 86 % respectively. Natural organic matters inhibited the phase transfer efficiency of the SDBS/BS-12 mixture, whereas anions and monovalent cations enhanced the phase transfer capability of the mixture. High-valent cations led to precipitation in the SDBS/BS-12, which could be eliminated by adding Na2Si2O5. The SDBS/BS-12 mixture delivered the same phase transfer efficiency with the dosage of 1.73-23.07 % of other single surfactants, and its cost was equivalent to 0.25-41.7 % of the latter, thus embracing bright application prospects.

Efficient degradation of chlorpyrifos and intermediate in soil by a novel microwave induced advanced oxidation process: A two-stage reaction

The application of microwave/peroxymonosulfate (MW/PMS) in soil remediation has been limited by some shortages including low utilization efficiency of oxidants, low MW absorption capacity of soil particles and incomplete degradation of intermediate. In this study, heating pad waste (HPW) was added in the MW/PMS system to increase the ability of absorbing MW and degradation efficiency of toxic intermediate. A two-stage method for degradation of chlorpyrifos (CPF) and its intermediate 3,5,6-trichloro-2-pyridinol (TCP) by MW/PMS assisted with HPW was proposed. In the first stage, more than 90% of CPF was degraded within 15 min before the addition of HPW, and most of the CPF was converted into TCP through direct or indirect pathways under the action of 1O2. In the second stage, more than 70% of the generated TCP was rapidly degraded through SO4•- oxidation and electron transfer. The TCP was further degraded with the assistance of HPW through methylation, hydroxylation and dechlorination etc., and the toxicity of degradation products was decreased significantly. pH and soil organic matter had little influences on CPF and TCP degradation. Therefore, a new strategy for remediation of CPF contaminated-soil was provided based on MW/PMS technology and the concept of "treating waste with waste".

Insights into the potential applications of permanganate/peroxymonosulfate systems: enhancement via amorphous MnO2, effects of water matrices, and optimization using response surface methodology

In this study, we developed a novel self-catalytic oxidation system involving peroxymonosulfate (PMS) and permanganate (KMnO4), named as CUPP, to efficiently mineralize sulfamethoxazole (SMX) in groundwater. It was found that amorphous MnO2 derived from the in situ reduction of KMnO4 can directly adsorb HSO5-, a complex hydroxyl group, mediate the internal disproportionation reaction of HSO5- with the manganese complex, and effectively activate PMS, thereby promoting the oxidation of SMX and its degradation intermediates through sulfonate radiation. Furthermore, by using electron spin resonance (EPR), HPLC/MS full scan, and response surface methodology, the coexistence of HO˙, SO4-˙, O2-˙, 1O2, and active chlorine (Cl2, HOCl) in the CUPP system was confirmed. A total of 24 intermediate products were detected, and four possible degradation pathways were identified for SMX. In addition, it was found that the CUPP system has a strong impact resistance to pH variations, groundwater anions, and natural organic matter stress. Undoubtedly, the CUPP system presents an innovative approach for the degradation of various emerging organic pollutants in groundwater.

Potential risks of organic contaminated soil after persulfate remediation: Harmful gaseous sulfur release

Persulfate is considered a convenient and efficient remediation agent for organic contaminated soil. However, the potential risk of sulfur into the soil remediation by persulfate remains ignored. In this study, glass bottles with different persulfate dosages and groundwater tables were set up to simulate persulfate remediation of organic pollutants (aniline). The results found sulfate to be the main end-product (83.0%‒99.5%) of persulfate remediation after 10 days. Moreover, H2S accounted for 93.4%‒99.4% of sulfur reduction end-products, suggesting that H2S was the final fate of sulfur. H2S was released rapidly after one to three days at a maximum concentration of 33.0 ppm, which is sufficient to make a person uncomfortable. According to the fitted curve results, H2S concentration decreased to a safe concentration (0.15 ppm) after 20‒85 days. Meanwhile, the maximum concentration of methanethiol reached 0.6 ppm. These results indicated that secondary pollution from persulfate remediation could release harmful gases over a long time. Therefore, persulfate should be used more carefully as a remediation agent for soil contamination.

Effect of atrazine on testicular toxicity involves accommodative disorder of xenobiotic metabolizing enzymes system and testosterone synthesis in European quail (Coturnix coturnix)

Due to the wide use of atrazine (ATR), the concern has increased regarding the negative impact of ATR on reproduction. Nevertheless, the reproductive effects caused by different exposure concentrations and the severity of toxic damage are poorly understood. In organisms, ATR is metabolized and degraded through phase II enzyme systems, and changes in cytochrome P450 (CYP) enzymes may have a regulatory role in the harm of ATR. However, less information is available on the induction of CYPs by ATR in avian organisms, and even less on its effects on the testis. Birds are exposed to ATR mainly through food residues and contaminated water, the purpose of this study was to examine reproductive toxicity by different exposure concentrations and elaborate metabolic disorders caused by ATR in European quail (Coturnix coturnix). In this study, the quail were given ATR at 50 mg/kg, 250 mg/kg and 500 mg/kg by oral gavage for 45 days, and the testicular weight coefficients, histopathology and ultrastructure of testes, primary biochemical functions, sex steroid hormones, critical protein levels in the testosterone synthesis pathway, the expression of genes involved CYPs, gonad axis and nuclear receptors expression were investigated. Altogether, testicular coefficient decreased significantly in the high-dose group (1.22%) compared with the control group (3.03%) after 45 days of ATR exposure, and ATR is a potent CYP disruptor that acts through the NXRs and steroid receptor subfamily (APND, CAR, ERND and ERα) without a dose-dependent manner. Notably, ATR interfered with the homeostasis of hormones by triggering the expression of hormones on the gonad axis (LH and E2). These results suggest that exposure to ATR can cause testicular toxicity involving accommodative disorder of phase II enzyme and testosterone synthesis in European quail.

Spatiotemporal distribution and pollution control of pollutants in a Cr(VI)-contaminated site located in Southern China

Soil and groundwater Cr(VI) pollution resulting from improper disposal and accidental spills is a critical problem worldwide. In this study, a comprehensive study was conducted to assess the hydrogeological conditions of a contaminated site, obtain spatiotemporal distribution and trend forecasts of pollutant Cr(VI), and determine the feasibility of applying clayey engineered barriers for pollution control. The results showed that the hydraulic conductivity (K) of the clayey barrier (1.56E-5 m/d) is several orders of magnitude lower than that of the stratum beneath the contaminated site, with K values ranging from 0.0014 to 4.76 m/d. Cr(VI) exhibits high mobility and a much higher concentration in the vadose zone, with maximum values of 6100 mg/kg in topsoil and 2090 mg/L in the perched aquifer. The simulation results indicated that the groundwater in the vicinity of the contaminated site, as well as downstream of the Lianshui River, is seriously threatened by Cr(VI). Notably, the pollution plume could occur downstream of the Lianshui River after 8 years. The retention efficiency of clayey engineered barriers will decrease over time, at 61.6% after 8 years and 33% after 20 years. This work contributes to an in-depth understanding of Cr(VI) migration at contaminated sites.

Microbe combined with Fe2+-heat activated persulfate to decompose phenanthrene in red soil: comparison of acid-resistant degrading microflora and indigenous bacteria

This work is designed to counteract the deficiency of targeted research on the PAHs polluted specific soil, especially when the chemicals extremely denatured it. Phenanthrene-contaminated red soil was treated through two-stage process: persulfate oxidation (on dosages of 3.48%, 5.21%, and 6.94%, combined with Fe2+ and β-cyclodextrin, then heated) followed by biodegradation (indigenous bacteria vs. acid-resistant PAHs-degrading microflora (named ADM)) for 90 days. The dosage of oxidant greatly affected the removal efficiencies, which ranged from 46.78 to 85.34% under different treatment. After undergoing oxidation, the soil pH dropped below 3.0 synchronously and retained relatively strong oxidation state. The indigenous bacteria in red soil showed considerable degradation potential that will not vanish upon the sudden change of soil properties, whose average combined removal reached 95.43%, even higher than subgroups of bioaugmentation, but the population structure showed extremely simplex (Proteobacteria as superior occupied proportion of 91.77% after 90-day rehabilitation). The ADM screened from the coking wastewater was dominated by Klebsiella (75.4%) and Pseudomonas (23.6%), whose cooperation with 6.94% persulfate made the residual PHE reduced to less than 50 mg·kg-1 in about 28 days. High-throughput sequencing analysis showed that the microbial community composition of the ADM applied-group was more abundant in the later stage of remediation. ADM inoculation has the advantages of shortening the restoration period and having a positive impact on the soil micro-ecology.

Current status and future challenges of chlorobenzenes pollution in soil and groundwater (CBsPSG) in the twenty-first century: a bibliometric analysis

The global industrial structure had undertaken significant changes since the twenty-first century, making a severe problem of chlorobenzene pollution in soil and groundwater (CBsPSG). CBsPSG receives increasing attention due to the high toxicity, persistence, and bioaccumulation of chlorobenzenes. To date, despite the gravity of this issue, no bibliometric analysis (BA) of CBsPSG does exist. This study fills up the gap by conducting a BA of 395 articles related to CBsPSG from the Web of Science Core Collection database using CiteSpace. Based on a comprehensive analysis of various aspects, including time-related, related disciplines, keywords, journal contribution, author productivity, and institute and country distribution, the status, development, and hotspots of research in the field were shown visually and statistically. Moreover, this study has also delved into the environmental behavior and remediation techniques of CBsPSG. In addition, four challenges (unequal research development, insufficient cooperation, deeply mechanism research, and developing new technologies) have been identified, and corresponding suggestions have been proposed for the future development of research in the field. Afterwards, the limitations of BA were discussed. This work provides a powerful insight into CBsPSG, enabling to quickly identify the hotspot and direction of future studies by relevant researchers.

Sustainable integrated process for cogeneration of oxidants for VOCs removal

This study upgrades the sustainability of environmental electrochemical technologies with a novel approach consisting of the in-situ cogeneration and use of two important oxidants, hydrogen peroxide (H2O2) and Caro's acid (H2SO5), manufactured with the same innovative cell. This reactor was equipped with a gas diffusion electrode (GDE) to generate cathodically H2O2, from oxygen reduction reaction, a boron doped diamond (BDD) electrode to obtain H2SO5, via anodic oxidation of dilute sulfuric acid, and a proton exchange membrane to separate the anodic and the cathodic compartment, preventing the scavenging effect of the interaction of oxidants. A special design of the inlet helps this cell to reach simultaneous efficiencies as high as 99% for H2O2 formation and 19.7% for Caro's acid formation, which means that the cogeneration reaches efficiencies over 100% in the uses of electric current to produce oxidants. The two oxidants' streams produced were used with different configurations for the degradation of three volatile organic compounds (benzene, toluene, and xylene) in a batch reactor equipped with a UVC-lamp. Among different alternatives studied, the combination H2SO5/H2O2 under UVC irradiation showed the best results in terms of degradation efficiency, demonstrating important synergisms as compared to the bare technologies.

Oxalate enhanced aniline degradation by goethite: Structural dependent activity, hydroxyl radicals generation and toxicity evaluation

A photochemical system combining iron (hydr)oxides and oxalate (Ox) shows application prospects in wastewater treatment due to the abundance of reactive oxygen species (ROS) generation. Nevertheless, it is a challenge to the investigate photochemical activity of iron (hydr)oxides/Ox systems with varying structural properties. Herein, the photochemical behaviors of Ox on goethite (Gt) surface from the view of structural dependent activity, containment degradation, and ROS generation were explored in detail. Results confirmed that bidentate mononuclear was formed on Gt surface after complexing Ox. Combined with density functional theory calculation and pH time evolution during aniline degradation, the photochemical activity of the Gt/Ox system fell in between that of ferrihydrite/Ox and hematite/Ox systems. After irradiating 120 min visible light, 96.5% aniline was degraded by 1.0 mM Ox and 0.2 g/L Gt. The amount of •OH in vis/Gt/Ox system could be up to 309.3 μM and its generation was closely associated with Fe(II) while slightly affected by the generated H2O2. Moreover, as revealed by high-performance liquid chromatography with mass spectrometric and Ecological Structure Activity Relationships software, the toxicity of the intermediates of aniline degradation in the vis/Gt/Ox system towards fish and green algae increased first but then declined accompanied by the generation of non-toxic ring-opening products at the end of reaction. According to the findings in the presented study, it could be concluded that vis/Gt/Ox is a promising approach to wiping out aniline wastewater.

Insights into the mechanism of persulfate activation with carbonated waste metal adsorbed resin for the degradation of 2,4-dichlorophenol

Superabsorbent resin (SAR) saturated with heavy metals poses a threat to surrounding ecosystem. To promote the reutilization of waste, resins adsorbed by Fe²⁺ and Cu²⁺ were carbonized and used as catalysts (Fe@C/Cu@C) to activate persulfate (PS) for 2,4-dichlorophenol (2,4-DCP) degradation. The heterogeneous catalytic reaction was mainly responsible for 2,4-DCP removal. The synergistic effect of Fe@C and Cu@C was propitious to 2,4-DCP degradation. Fe@C/Cu@C with a ratio of 2:1 showed the highest performance of 2,4-DCP removal. 40 mg/L 2,4-DCP was completely removed within 90 min under reaction conditions of 5 mM PS, pH = 7.0 and T = 25 °C. The cooperation of Fe@C and Cu@C facilitated the redox cycling of Fe and Cu species to supply accessible PS activation sites, enhancing ROS generation for 2,4-DCP degradation. Carbon skeleton enhanced 2,4-DCP removal via radical/nonradical oxidation pathways and via its adsorption to 2,4-DCP. SO₄˙-, HO˙ and O₂^•- were the dominate radical species involved in 2,4-DCP destruction. Meanwhile, the possible pathways of 2,4-DCP degradation were proposed based on GC-MS. Finally, recycling tests proved catalysts exhibited recyclable stability. Aiming to resource utilization, Fe@C/Cu@C with satisfactory catalysis and stability, is promising catalyst for contaminated water treatment.

Enhanced cyanogen chloride formation after UV/PS and UV/H2O2 pre-oxidation and chlorination in natural river water

Ultraviolet/persulfate (UV/PS) and Ultraviolet/hydrogen peroxide (UV/H₂O₂) have attracted much attention in recent years as advanced oxidation processes for water treatment. However, it is not all clear how these two methods affect the formation of cyanogen chloride (CNCl) in the subsequent water chlorination process. In this study, it was found that both UV/H₂O₂ and UV/PS pre-oxidation promoted the formation of CNCl in six actual water samples collected from urban rivers. Glycine, uric acid, arginine and histidine were investigated as the model compounds to explore the effects of different methods on the production of CNCl. The results showed that compared with chlorination alone, pre-oxidation by UV/H₂O₂ and UV/PS can reduce the production of CNCl for glycine and uric acid by up to 95% during post-chlorination process. However, they can greatly promote the formation of CNCl for arginine and histidine by up to 120-fold. In a more detailed investigation, pre-oxidation of histidine formed highly reactive intermediates to chlorine, leading to increased CNCl formation and chlorine consumption. The results showed that the precursors of CNCl was altered after pre-oxidation, and need to be re-evaluated.

Individual and combined effect of ions species and organic matter on the removal of microcontaminants by Fe3+-EDDS/solar-light activated persulfate

This work is focused on improving the understanding of the complex water matrix interactions occurring during the removal of a microcontaminants mixture (acetamiprid, carbamazepine and caffeine) by solar/Fe³⁺-EDDS/persulfate process. The individual and combined effects of sulfates (100-500 mg/L), nitrates (20-160 mg/L), bicarbonates (77-770 mg/L) and chlorides (300-1500 mg/L) were assessed by comparing the outcomes obtained in different synthetic and actual water matrices. In general, the results showed negligible effects of the different anions on Fe³⁺-EDDS concentration and PS consumption profiles, while the combination of bicarbonates and chlorides seemed to be the key for the MC removal efficiency decrease found when working with complex matrixes. Finally, the influence of dissolved organic matter on process performance was evaluated. It was concluded that there is neither any influence of this variable on Fe³⁺-EDDS concentration and PS consumption profiles. In contrast, there was a general negative effect on MC removal efficiency, which strongly depended on both the concentration and composition of the dissolved organic matter.

Hydrothermal synthesis of sewage sludge biochar for activation of persulfate for antibiotic removal: Efficiency, stability and mechanism

The use of biochar materials as catalysts to activate persulfate (PS) for the degradation of antibiotics has attracted much attention. In this study, a carbonaceous material (Cu/Zn-SBC) was prepared from sewage sludge by hydrothermal modification. The efficiency of PS activation by Cu/Zn-SBC was investigated using tetracycline (TC) as the model antibiotic. In the Cu/Zn-SBC + PS system, the TC removal rate reached 90.13% at 10 min and exceeded 99% within 4 h. This not only met the requirement of removing large amounts of pollutants in a short time but also achieved the complete removal of pollutants in the subsequent time. Additionally, the Cu/Zn-SBC + PS system was found to be dominated by radical and nonradical pathways. Cu, hydroxyl and carboxyl groups on the surface of Cu/Zn-SBC promoted the production of free radicals and non-free radicals. Under several changes in reaction conditions and water environment factors, the TC removal rate remained above 85% within 10 min. Furthermore, the removal rate of TC was still 85.79% when Cu/Zn-SBC combined with PS was reused twice and 77.14% when reused four times. This study provides an ideal solution for the treatment of sewage sludge, and offers a stable and efficient material for removing antibiotics from wastewater.

Improvement of Carbonyl Groups and Surface Defects in Carbon Nanotubes to Activate Peroxydisulfate for Tetracycline Degradation

Carbon nanotubes (CNTs) were considered a promising activator for persulfates due to their high electrical conductivity, large specific surface area and low toxicity. The functional groups and surface defects of CNTs could significantly affect their activation performance. In this study, CNTs with high C=O ratio and defect density (CNT-O-H) were prepared through a facile treatment of raw CNTs with HNO₃ oxidation followed by calcination at 800 °C under an argon atmosphere. X-ray photoelectron spectroscopy (XPS) and Raman results showed that the C=O proportion and defect degree (I_D/I_G) rose to 75% and 1.53, respectively. The obtained CNT-O-H possessed a superior performance towards peroxydisulfate (PDS) activation, and the degradation efficiency of tetracycline (TC) in the CNT-O-H/PDS system was increased to 75.2% from 56.2% of the raw CNTs/PDS system within 40 min. Moreover, the activity of CNT-O-H after use could be easily recovered with re-calcination. In addition, the CNT-O-H/PDS system exhibited high adaptabilities towards wide solution pH (2-10), common coexisting substances and diverse organic pollutants. Singlet oxygen (¹O₂) was confirmed to be the dominant reactive oxygen species (ROS) generated in the CNT-O-H/PDS system. It was inferred that surface C=O groups and defects of CNTs were the key site to activate PDS for TC degradation.

Simultaneous removal of carbamazepine and Cd(II) in groundwater by integration of peroxydisulfate oxidation and sulfidogenic process: The bridging role of SO42

Heat-activated PDS oxidation (HAPO) has been widely used for in-situ chemical oxidation (ISCO) of micropollutants in groundwater, whereas the aesthetic demerit of additional SO₄^2- production is largely overlooked. In this study, the sulfidogenic process is used to offset the aesthetic demerit, and the production of SO₄^2- is then employed to recycle heavy metals. The innovative integration technology with PDS oxidation and sulfidogenic process via the bridging role of SO₄^2- was reported to remove micropollutants and heavy metals in groundwater simultaneously. HAPO could completely degrade CBZ, producing 400 mg/L SO₄^2- with the addition of 0.50 g/L PDS. Sulfate-reducing bacteria (SRB) utilize SO₄^2- generated from HAPO as the electron acceptor in the sulfidogenic process, removing and recycling Cd(II) via the precipitation of CdS. The SRB tolerance experiment revealed the viability of PDS oxidation coupled with the sulfidogenic process via the bridging role of SO₄^2-. Overall, the integration technology is a green and promising technology for simultaneous micropollutants removal and heavy metals recycling in groundwater.

Vinasse-based biochar magnetic composites: adsorptive removal of tetracycline in aqueous solutions

Highly efficient and cost-effective adsorbents for antibiotic removal are the key to mitigate pollution by industrial wastewaters. Pyrolyzing low-cost winemaking waste into biochar is a promising means for waste biomass utilization. This study assembled vinasse-derived biochar with manganese ferrite into vinasse-manganese ferrite biochar-magnetic composites (V-MFB-MCs) through simultaneous pyrolysis of waste biomass and metal (Mn and Fe) hydroxide precipitates. Batch experiments were conducted to evaluate the kinetics and isotherms of tetracycline (TC) adsorption as well as the influence of pH value, humic acid, and ionic strength. Morphological characterization showed that crystalline MnFe₂O₄ nanoparticles were impregnated within the framework of fabricated V-MFB-MCs. Superior TC adsorption capacity and fast pseudo-second-order kinetics could be achieved by the V-MFB-MCs-800 at pH 3.0. The TC adsorption onto V-MFB-MCs-800 was highly pH-dependent and controlled by the positive influence of ionic strength and humic acid. V-MFB-MCs-800 showed excellent adsorption performance in different natural water. Multiple interaction mechanisms including pore filling effect, π-π stacking interaction, and hydrogen bonding contribute to TC removal by V-MFB-MCs-800, which can be an innovative biowaste-derived material for industrial wastewater treatment.

Synergistic detoxification by combined reagents and safe filling utilization of cyanide tailings

Cyanide tailings are the major hazardous wastes generated in the production process of the gold industry, which not only contain highly toxic cyanide, but also contain heavy metals with recycling value and other substances suitable for building materials or filling. These tailings are in urgent need of purification treatment and safe utilization. In this study, the impacts of treatment methods, types and combinations of reagents on decyanation effect were researched. Gold in cyanide tailings was recovered by flotation, and flotation tailings were used for filling after identifying the properties of solid waste. Results are as follows: (1) INCO method and 5 reagents (sodium sulfite, sodium persulfate, copper sulfate, ferrous sulfate and zinc sulfate) were selected for synergistic decyanation treatment, and cyanide concents in slurry and leaching solution were decreased to the minimum. (2) The gold recovery rate of the tailings through flotation was increased by 27.8% than without detoxification. (3) Flotation tailings were identified as general industrial solid wastes by leaching toxicity and toxic substance content analysis. (4) As filling aggregate, under the conditions of slurry concentration of 63% and cement-sand ratio of 1:6, the strength filling body of flotation tailings reached 1.32 Mpa after 28 days of maintenance. (5) This process and combined reagents were applied to engineering. The cyanide content in the leaching solution and the flotation recovery rate of gold were kept below 0.2 mg/L and above 60% respectively, and the strength of the filling body was stable to meet the requirements of underground filling.

Roles of oxidant, activator, and surfactant on enhanced electrokinetic remediation of PAHs historically contaminated soil

Electrokinetic (EK) remediation technology can enhance the migration of reagents to soil and is especially suitable for in situ remediation of low permeability contaminated soil. Due to the long aging time and strong hydrophobicity of polycyclic aromatic hydrocarbons (PAHs) from historically polluted soil, some enhanced reagents (oxidant, activator, and surfactant) were used to increase the mobility of PAHs, and remove and degrade PAHs in soil. However, under the electrical field, there are few reports on the roles and combined effect of oxidant, activator, and surfactant for remediation of PAHs historically contaminated soil. In the present study, sodium persulfate (PS, oxidant, 100 g L-1) or/and Tween 80 (TW80, surfactant, 50 g L-1) were added to the anolyte, and citric acid chelated iron(II) (CA-Fe(II), activator, 0.10 mol L-1) was added to catholyte to explore the roles and contribution of enhanced reagents and combined effect on PAHs removal in soil. A constant voltage of 20 V was applied and the total experiment duration was 10 days. The results showed that the removal rate of PAHs in each treatment was PS + CA-Fe(II) (21.3%) > PS + TW80 + CA-Fe(II) (19.9%) > PS (17.4%) > PS + TW80 (11.4%) > TW80 (8.1%) > CK (7.5%). The combination of PS and CA-Fe(II) had the highest removal efficiency of PAHs, and CA-Fe(II) in the catholyte could be transported toward anode via electromigration. The addition of TW80 reduced the electroosmotic flow and inhibited the transport of PS from anolyte to the soil, which decreased the removal of PAHs (from 17.4 to 11.4% with PS, from 21.3 to 19.9% with PS+CA-Fe(II)). The calculation of contribution rates showed that PS was the strongest enhancer (3.3~9.9%), followed by CA-Fe(II) (3.9~8.5%) (with PS), and the contribution of TW80 was small and even negative (-1.4~0.6%). The above results indicated that the combined application of oxidant and activator was conducive to the removal of PAHs, while the addition of surfactant reduced the EOF and the migration of oxidant and further reduced the PAHs removal efficiency. The present study will help to further understand the role of enhanced reagents (especially surfactant) during enhanced EK remediation of PAHs historically contaminated soil.

Toxicological effects, environmental behaviors and remediation technologies of herbicide atrazine in soil and sediment: A comprehensive review

Atrazine has become one of the most popular applied triazine herbicides in the world due to its high herbicidal efficiency and low price. With its large-dosage and long-term use on a global scale, atrazine can cause widespread and persistent contamination of soil and sediment. This review systematically evaluates the toxicological effects, environmental risks, environmental behaviors (adsorption, transport and transformation, and bioaccumulation) of atrazine, and the remediation technologies of atrazine-contaminated soil and sediment. For the adsorption behavior of atrazine on soil and sediment, the organic matter content plays an extremely important role in the adsorption process. Various models and equations such as the multi-media fugacity model and solute transport model are used to analyze the migration and transformation process of atrazine in soil and sediment. It is worth noting that certain transformation products of atrazine in the environment even have stronger toxicity and mobility than its parent. Among various remediation technologies, the combination of microbial remediation and phytoremediation for atrazine-contaminated soil and sediment has wide application prospects. Although other remediation technologies such as advanced oxidation processes (AOPs) can also efficiently remove atrazine from soil, some potential problems still need to be further clarified. Finally, some related challenges and prospects are proposed.

The journey of toluene to complete mineralization via heat-activated peroxydisulfate in water: intermediates analyses, CO2 monitoring, and carbon mass balance

Our study has thoroughly investigated the complete mineralization of toluene in water via heat-activated peroxydisulfate (PDS) by: (1) monitoring concentrations/peak areas of various intermediates and CO₂ throughout the reaction period and (2) identifying water-soluble and methanol-soluble intermediates, including trimers, dimers, and organo-sulfur compounds, via non-target screening using high-resolution mass spectrometry. Increased temperature and PDS dosage enhanced toluene removal/mineralization kinetics and increased the rate/extent of benzaldehyde formation and its further transformation. Artificial groundwater and phosphate buffer minimally impacted toluene removal but significantly decreased benzaldehyde formation, indicating a shift in transformation pathways. The stoichiometric PDS dose (18 mM at 40 °C) was adequate to completely mineralize toluene (1 mM), with < 10% PDS needed to transform toluene to intermediates. Toluene transformation to intermediates occurred in 47 h (k_obs,toluene = 0.594 h^-1) whereas 564 h were required for complete mineralization (k_obs,CO2 = 0.0038 h^-1). O₂ accumulated once mineralization neared completion. A carbon mass balance, including quantification of nine intermediates and CO₂ throughout the transformation period, showed that unquantified/unknown intermediates (including yellowish-white precipitates) reached as high as 80% of total carbon before transformation to CO₂. Possible toluene transformation pathways via hydroxylation, sulfate addition, and oxidative coupling are proposed.

Nitrophenolic byproducts formation during sulfate radical oxidation and their fate in simulated drinking water treatment processes

Nitrite can be transformed to nitrophenolic byproducts in sulfate radical oxidation processes (SR-AOPs). These nitrophenols are highly mobile in subsurface and can potentially contaminate drinking water sources. However, their fate in a drinking water treatment remains ambiguous. Herein, the removal and transformation of four nitrophenolic byproducts formed during a heat activated peroxydisulfate oxidation process, i.e., 4-nitrophenol, 2,4-dinitrophenol, 5-nitrosalicylic acid, and 3,5-dinitrosalicylic acid, in a simulated drinking water treatment train were comprehensively examined. The removal of these nitrophenolic compounds in coagulation by either aluminum sulfate or ferric chloride ranged from 3.8% to 13.4%. In the chlorination process, 4-nitrophenol was removed only by 45.4% in 24 h at a chlorine dose of 5.0 mg/L. The removal of the other three nitrophenolic byproducts were less than 20%. Reaction between nitrophenolic byproducts and chlorine via electrophilic substitution gave rise to their chlorinated derivatives. Chlorinated nitrophenolic byproducts were more recalcitrant and toxic than their parent compounds, but still a tiny fraction of them could undergo further oxidation to form trichloronitromethane. This work implied that once nitrophenolic byproducts enter water source, they can penetrate the drinking water treatment train and react with the residual chlorine in distribution pipelines to form more hazardous byproducts. The findings raised additional concerns to the potential risk of the nitrophenolic byproducts formed in SR-AOPs.

Removal of emerging organic micropollutants via modified-reverse osmosis/nanofiltration membranes: A review

Hazardous micropollutants (MPs) such as pharmaceutically active compounds (PhACs), pesticides and personal care products (PCPs) have emerged as a critical concern nowadays for acquiring clean and safe water resources. In the last few decades, innumerable water treatment methods involving biodegradation, adsorption and advanced oxidation process have been utilized for the removal of MPs. Of these methods, membrane technology has proven to be a promising technique for the removal of MPs due to its sustainability, high efficiency and cost-effectiveness. Herein, the aim of this article is to provide a comprehensive review regarding the MPs rejection mechanisms of reverse osmosis (RO) and nanofiltration (NF) membranes after incorporation of nanomaterials and also surface modification atop the PA layer. Size exclusion, adsorption and electrostatic charge interaction mechanisms play important roles in governing the MP removal rate. In addition, this review also discusses the state-of-the-art research on the surface modification of thin film composite (TFC) membrane and nanomaterials-incorporated thin film nanocomposite (TFN) membrane in enhancing MPs removal performance. It is hoped that this review can provide insights in modifying the physicochemical properties of NF and RO membranes to achieve better performance in water treatment process, particularly for the removal of emerging hazardous substances.

Applications and influencing factors of the biochar-persulfate based advanced oxidation processes for the remediation of groundwater and soil contaminated with organic compounds

Biochar (BC) is a low-cost material rich in carbon, which is being used increasingly as a catalyst in persulfate-based advanced oxidation processes (PS-AOPs) for the remediation of groundwater and soil contaminated with organic compounds. In this work, a general summary of preparation methods and applications of various BC (i.e., pristine BC, magnetic BC, and chemically modified BC) in PS-AOPs is presented. Different influence factors (e.g., pH, anions, natural organic matter) for the degradation of organic compounds are discussed. Meanwhile, the influence of external energy (e.g., solar irradiation, UV-Vis, ultrasonic) is also mentioned. Furthermore, the advantage of different BC in PS-AOPs are compared. Finally, potential problems, challenges, and prospects in the application of biochar-persulfate based advanced oxidation processes (BCPS-AOPs) are discussed in the conclusion and perspective.

Highly efficient adsorption of chromium on N, S-codoped porous carbon materials derived from paper sludge

The synergistic effect of heteroatoms is a viable method to enhance the adsorption performance of heavy metal onto carbon-based materials. However, the high cost, complex operation and a lot of pollution from the synthesis process have limited its development. Herein, a facile two-step pyrolysis method is used to prepare in situ N and S doped porous biochar from paper mill sludge for the removal of Cr(VI) from aqueous environment. The NSC-450 sample prepared under the optimum conditions has a large specific surface area of 3336.7 m² g^-1, an average pore size of 2.56 nm and a total pore volume of 2.10 cm³ g^-1, manifesting the excellent adsorption capacity of 356.25 mg g^-1 for Cr(VI). The adsorption of Cr(VI) by NSC-450 is consistent with the Langmuir isotherm and pseudo-second-order model, suggesting a spontaneous and endothermic chemisorption process. The analysis results show that the NH, graphitic nitrogen and thiophene structures have a positive effect on converting a large amount of Cr(VI) to Cr(III) by synergistic reduction, indicating obviously facilitating Cr(VI) removal compared to other sites. Therefore, in this material, the strong adsorption mechanism is mainly reductive complexation. Moreover, the effects of real water quality, anions, cations and fulvic acid on the adsorption behavior of Cr(VI) onto the NSC-450 were further investigated. The results demonstrate that the chromium removal rate remains above 82% even in actual electroplating wastewater, suggesting NSC-450 has great practical application prospect. This work offered a feasible method for high-value utilization of sludge, but also provided a novel perspective for the future design of heteroatom-doped carbon materials for promoting to eliminate hexavalent chromium from water environment.

Activation of ozone by peroxymonosulfate for selective degradation of 1,4-dioxane: Limited water matrices effects

The presence of 1,4-dioxane in various water streams poses a threat to the health of human beings. In this study, the oxidative combination of ozone with peroxymonosulfate (PMS) was for the first time used to remove 1,4-dioxane from water. Near complete abatement of 1,4-dioxane was achieved by ozone-PMS after reaction of only 15 min and the degradation kinetics was found to be positively correlated with doses of PMS and ozone. Ozone-PMS oxidation had the optimum performance at slight base pH values. Both sulfate radicals and hydroxyl radicals were generated in ozone-PMS oxidation and these radicals resulted in the degradation of 1,4-dioxane. The effects of common water constituents and real water matrices were investigated. It was found that bicarbonate ions with a concentration up to 10 mM had a slight promoting effect, while either chloride ions or natural organic matter inhibited only slightly the degradation. Meanwhile, no obvious difference in the degradation of 1,4-dioxane was found among the real water matrices and deionized water, which demonstrates that ozone-PMS oxidation has high tolerance and stability. The results from this study demonstrate that ozone-PMS may be a promising technology for the removal of 1,4-dioxane from various water matrices.

Photo-electrochemical oxidation herbicides removal in stormwater: Degradation mechanism and pathway investigation

Although advanced oxidation processes (AOPs) such as photoelectrochemical oxidation (PECO), electrochemical oxidation (ECO) and photocatalytic oxidation (PCO), have shown potential for wastewater treatment, their application in urban stormwater has rarely been studied. This paper explored their major degradation mechanisms and possible degradation pathways of herbicides for stormwater applications (with treatment difficulty compared with wastewater). PECO and ECO showed excellent removal performance for diuron (100 %) and moderate for atrazine (around 35 %) under a relatively low potential (2 V). Superoxide radical (·O₂^-) has been found to be the dominant reactive species. Besides, there is evidence to indicate that hydroxyl radical (·OH) and free chlorine (·Cl) also support the degradation reactions. Up to 11 possible intermediate products have been identified during both diuron and atrazine degradation processes under PECO operation. Based on the proposed possible degradation pathways, the intermediates presented during PECO are species with further oxidation. As evidenced by the undetected species of more oxidized intermediates for ECO and PCO, some further degradation steps are missing, which demonstrate their lower oxidation capacity leading to incomplete decomposition of stormwater herbicides. Thus, PECO has a great potential to be developed into a passive stormwater degradation system due to its strong oxidation potential.

Influences and mechanisms of phosphate ions onto persulfate activation and organic degradation in water treatment: A review

Currently, various strategies have been applied to activate persulfate (PS) for contaminant removal from water. However, the background phosphate ions in water affect PS activation and organic degradation, and the mechanism of their influence on the processes is still controversial. In this review, the possible effects of different phosphate forms (HPO₄^2-, H₂PO₄^-, and PO₄^3-) on PS activation and contaminant degradation were systematically evaluated and summarized. Specifically, HPO₄^2- promotes contaminant degradation in direct peroxymonosulfate (PMS) oxidation and thermal/PMS systems, while it exhibits inhibition to thermal/peroxodisulfate (PDS) and ultraviolet (UV)/PDS systems. Meanwhile, H₂PO₄^- inhibits most oxidation processes based on PMS and PDS, except for non-metal dominated and metal assisted PMS systems. Coexisting HPO₄^2- and H₂PO₄^- could present beneficial effects in thermal, Co²⁺ and non-metal activated and metal assisted PMS systems. Nevertheless, their inhibitory effects were found in direct PMS oxidation, UV/PMS (or PDS) and metal dominated PMS systems. Generally, phosphate ions inhibit PMS/PDS activation through competing adsorption with PMS or PDS on the solid surface, forming a complex with metal ions, as well as occupying active sites on solid catalysts. In addition, phosphate ions can quench radicals for reduced degradation of contaminants. However, phosphate ions could weaken the bond dissociation energy via combining with PMS and contaminants or form a complex with Co²⁺, thus displaying a facilitative effect. This review further discusses major challenges and opportunities of PS activation with co-existing phosphates and will provide guidance for better PS utilization in real water treatment practice.

An overview on surfactants as pollutants of concern: Occurrence, impacts and persulfate-based remediation technologies

Surfactants are molecules that reduce interfacial energy and increase solubility of other pollutants in water. These properties make them suitable for various domestic and industrial applications, soil remediation, pesticide formulation, among others. The increase in their use and the lack of strict regulations regarding their disposal and management is a matter of concern and requires more attention since the release and distribution of these compounds into the environment can modify important water quality parameters. As a result of these changes, different toxicological effects to aquatic organisms are discussed and exposed herein. On this basis, we provide an overview of the classes of surfactants, as well as their occurrence in different aqueous matrices. In addition, existing regulations around the world regarding their concentration limit for different environments are discussed. Current research focuses on the application of conventional treatments, such as biological treatments; notwithstanding, more toxic and bioaccumulative products can be generated. Advanced Oxidation Processes are promising alternatives and have also been widely applied for the removal of surfactants. This study provides, for the first time, an overview of the application of persulfate-based processes for surfactants degradation based on recent literature findings, as well as the various factors related to the activation of the persulfate anions. This review also highlights the challenges and opportunities for future research to overcome the obstacles to the practical application of this process.

Pollution simulation and remediation strategy of a zinc smelting site based on multi-source information

Contaminated sites pose a significant risk to human health and the regional environment. A comprehensive study was dedicated to improving the understanding of the contamination condition of a smelting site by integrating multi-source information through 3D visualization techniques. The results showed that 3D visualization reveals excellent potential for application in the environmental studies to finely depict contamination in soils and establish relationships with geological features, hydrological conditions, and sources of contamination. The contamination plume model revealed that the soil environment at the site was seriously threatened by toxic metals, and dominated by multi-metal contamination, with contamination soil volume ranked as Cd > As > Pb> Zn > Hg. The stratigraphic model revealed the heterogeneous geological conditions of the site and identified the mixed fill layer as the primary remediation soil layer. The permeability model revealed that soil permeability significantly influenced contamination dispersion and contributed to delineate the contamination boundary accurately. The ecological hazard model targeted the high ecological hazard area and determined the high hazard contribution of Cd and Hg in the site soil. The outcomes can be directly applied to actual site remediation and provide a reference for the contaminated sites evaluation and restoration in the future.

Recent progress on in-situ chemical oxidation for the remediation of petroleum contaminated soil and groundwater

Accidental oil leaks and spills can often result in severe soil and groundwater pollution. In situ chemical oxidation (ISCO) is a powerful and efficient remediation technology. In this review, the applications and recent advances of three commonly applied in-situ oxidants (hydrogen peroxide, persulfate, and permanganate), and the gap in remediation efficiency between lab-scale and field-scale applications is critically assessed. Feasible improvements for these measures, especially solutions for the 'rebound effect', are discussed. The removal efficiencies reported in 108 research articles related to petroleum-contaminated soil and groundwater were analyzed. The average remediation efficiency of groundwater (82.7%) by the three oxidants was higher than that of soil (65.8%). A number of factors, including non-aqueous phase liquids, adsorption effect, the aging process of contaminants, low-permeability zones, and vapor migration resulted in a decrease in the remediation efficiency and caused the residual contaminants to rebound from 19.1% of the original content to 57.7%. However, the average remediation efficiency of ISCO can be increased from 40.9% to 75.5% when combined with other techniques. In the future, improving the utilization efficiency of reactive species and enhancing the contact efficiency between oxidants and petroleum contaminants will be worthy of attention. Multi-technical combinations, such as the ISCO coupled with phase-transfer, viscosity control, controlled release or natural attenuation, can be effective methods to solve the rebound problem.

Persulfate-nitrogen doped graphene mixture as an oxidant for the synthesis of 3-nitro-4-aryl-2H-chromen-2-ones from aryl alkynoate esters and nitrite

A series of 3-nitro-4-aryl-2H-chromen-2-ones in good yields have directly been obtained from aryl alkynoate esters and nitrite by employing a mixture of K₂S₂O₈-nitrogen doped graphene as an oxidant in a watery medium at room temperature. A plausible mechanism for the reaction is also reported. It reveals that the product is formed through a cascade of nitro radical addition, spirocyclization, and ester migration. When compared to known methods for the synthesis of 3-nitro-4-aryl-2H-chromen-2-ones from aryl alkynoate esters, this protocol is environmentally friendly, sustainable, practical and energy efficient and does not use a harmful nitro source. Furthermore, nitrogen doped graphene used in this approach can be easily recovered and reused at least four times without losing its activity.

Efficient degradation of anthracene in soil by carbon-coated nZVI activated persulfate

The easy passivation defect of nano zero-valent iron (nZVI) greatly limits its application in site pollution remediation. Carbon coating can effectively inhibit the passivation of nZVI, but its effectiveness in the soil is still unknown. This study investigated the feasibility of carbon-coated nZVI (Fe⁰@C) as a persulfate (PS) activator to degrade anthracene (ANT) in soil. The results show that the Fe⁰@C/PS system can remove 51.6% of ANT in the soil after 0.5 h of reaction, and reach 76.4% after 12 h of reaction. Not only that, the Fe⁰@C/PS system shows a good removal effect on ANT within the initial pH range of 3-9. Free radical scavenging experiments show that superoxide radicals (O₂^•-) and singlet oxygen (¹O₂) are mainly responsible for the removal of ANT, while O₂^•- may be mainly used as a precursor for the generation of ¹O₂. The activation of PS by Fe⁰@C can generate a large number of free radicals, and soil components (such as β-MnO₂) can promote the conversion of O₂^•- to ¹O₂. Furthermore, the possible degradation pathway of ANT was also proposed. The findings are of great significance to fill up the knowledge gaps in the application of nZVI in soil remediation.

Remediation of phenol contaminated soil using persulfate activated by ball-milled colloidal activated carbon

The degradation of phenolic compounds through persulfate (PS) activation is a valuable approach for soil/groundwater remediation. Several reports have been made related to PS activation and contaminant degradation using carbo-catalysts; however, there is no detailed study on soil remediation by colloidal activated carbon. This study demonstrates the phenol (PhOH) degradation efficiency in spiked and field-contaminated soils by a novel and low-cost ball-milled colloidal activated carbon (CAC_BM) catalyst. The CAC_BM/PS system exhibited outstanding degradation performance for PhOH in both spiked and field-contaminated soils. Optimum condition for degradation of 5.63 mmol PhOH kg soil^-1 was achieved at 2.5 mg CAC_BM g soil^-1, 5 mM PS, and a solid-liquid ratio of 1:5 at 25 °C in the wide pH range of 3-11. Radical scavenger experiments and electron spin resonance (ESR) spectroscopy revealed that both radical (^•OH and SO₄^•-) and non-radical (¹O₂) species were involved in the CAC_BM/PS system. PhOH degradation in soil phase followed several degradation pathways, resulting in various intermediate byproducts such as acetic acid, maleic acid, p-benzoquinone, fumaric acid, and ferulic acid as analyzed by ultra-high-performance liquid chromatography with mass spectroscopy (UPLC-MS). The CAC_BM/PS system showed a promising potential in the remediation of organic-contaminated soil.

Effectiveness and mechanism of cyanide remediation from contaminated soils using thermally activated persulfate

Persulfate (PS)-based advanced oxidation processes have been frequently employed for contaminant remediation, but the effectiveness of PS oxidation for the elimination of cyanide-bearing contaminants from soil, and the underlying mechanisms, have rarely been explored. This study investigated the degradation of two iron-cyanide (Fe-CN) complexes (ferricyanide and ferrocyanide) with thermally activated PS via two remediation strategies, namely one-step oxidation (direct PS oxidation) and two-step oxidation (alkaline extraction followed by PS oxidation). The two-step oxidation process was more effective for the elimination of cyanide pollutants from soil, reaching >94% remediation efficiency for both Fe-CN complexes studied. The presence of dissolved soil components, especially soil organic matter, increased consumption of PS during the remediation process. A combined analysis based on electron paramagnetic resonance (EPR), free radical scavenging, and degradation product identification revealed that SO₄^- and HO were the principal reactive radicals responsible for Fe-CN degradation. Based on the determination of radical species and identification of decomposition products, a transformation pathway for Fe-CN complexes during thermally activated PS oxidation is proposed. Overall, this study demonstrates the effectiveness of the thermally activated PS oxidation technique for cyanide elimination from polluted soil. Further study is required to verify the feasibility of this method for field applications.

A comprehensive review on recent advances toward sequestration of levofloxacin antibiotic from wastewater

Among various classes of antibiotics, fluoroquinolones, especially Levofloxacin, are being administered on a large scale for numerous purposes. Being highly stable to be completely metabolized, residual quantities of Levofloxacin get accumulated into the food chain proving a great global threat for aquatic as well as terrestrial ecosystems. Various removal techniques including both conventional and advanced methods have been reported for this purpose. This review is a novel attempt to make a critical analysis of the recent advances made exclusively toward the sequestration of Levofloxacin from wastewater through an extensive literature survey (2015-2021). Adsorption and advanced oxidation processes especially photocatalytic degradation are the most tested techniques in which assorted nanomaterials play a significant role. Several photocatalysts exhibited up to 100% degradation of LEV which makes photocatalytic degradation the best method among other tested methods. However, the degraded products need to be further monitored in terms of their toxicity. Biological degradation may prove to be the most environment-friendly with the least toxicity, unfortunately, not much research is reported in the field. With these key findings and knowledge gaps, authors suggest the scope of hybrid techniques, which have been experimented on other antibiotics. These can potentially minimize the disadvantages of the individual techniques concurrently improving the efficiency of LEV removal. Besides, techniques like column adsorption, membrane treatment, and ozonation, being least reported, reserve good perspectives for future research. With these implications, the review will certainly serve as a breakthrough for researchers working in this field to aid their future findings.

One-step synthesis of natural montmorillonite/hematite composites with enhanced persulfate catalytic activity for sulfamethoxazole degradation: Efficiency, kinetics, and mechanism

Along with rapid development of sulfate radicals-based advanced oxidation process, efficient, alternatively eco-friendly and cost-effective catalyst is of uppermost priority. However, expensive chemicals are used as source of metal in most of these catalysts, and lose sight of the abundant natural mineral resources on immediate surroundings. In this work, montmorillonite and hematite, two of abundantly natural minerals were utilized to prepare a persulfate catalyst (TMH@M) for sulfamethoxazole (SMX) degradation. The results indicated more than 91% of SMX was removed within 60 min in TMH@M/PS system. The degradation efficiency of SMX of TMH@M/PS combined system was impacted by SMX concentration, PS dosage and natural organic matters, and can remain stable in a certain concentration of HA/chelating agent and a wide pH range (3.01-9.06). Radical scavenging and EPR tests demonstrated ¹O₂, OH, and SO₄^- were major reactive oxygen species in the TMH@M/PS system, while the latter seems more important for degradation of SMX. The results of SEM-EDS, XRD and XPS conformed that low valence iron species (Fe⁰, Fe²⁺ and Fe₃O₄) on TMH@M surface are the main driving force behind PS activation to generate reactive species. Furthermore, the iron species on TMH@M surface were transformed during reaction, that in favor of mitigating metal leaching. This work presented a method based on ubiquitous natural minerals to prepare catalyst with excellent PS activate performance for organic wastewater treatment implying a new strategy in minerals utilization deeply and a promisingly alternative process for organic wastewater treatment based on mineral materials.