Adsorption mechanism of hexavalent chromium onto layered double hydroxides-based adsorbents: A systematic in-depth review

In-situ passivation of Cr/Cr (VI) in the co-combustion ash of dyeing sludge and biomass via controlling the phase transformation of sulfate

The existence of sulfur fixation products in co-combustion ash of dyeing sludge and biomass influenced the leaching behavior of Cr/Cr (VI), however, the underlying mechanisms remained unclear. In this paper, we attempted to investigate the interaction between sulfur fixation product and leaching behavior of Cr/Cr (VI) and reveal the passivation mechanism of sulfur fixation products on Cr/Cr (VI). Results shows that 8 % CaSO4 inhibited the leaching of Cr and Cr (VI) in dyeing sludge ash, with inhibition ratios of 32.12 % and 61.94 %, respectively. Following Cr invasion, lattice expansion and crystal defects were observed on CaSO4·2 H2O (002) crystal plane in simulated ash, namely, isomorphous substitution and defect adsorption among CaSO4·2 H2O (002) played dominant roles in Cr immobilization. The binding energy of CaSO4·2 H2O (002) to CrO42- was as low as -205.51 kJ/mol, further confirming the chemical action to Cr (VI). Detailly, active Ca atoms on CaSO4·2 H2O (002) and bound water initially bonded to O atoms of CrO42-. And then the formation of covalent bond (Ca-OCr) stretched Ca-Os in CaSO4·2 H2O (002) from 2.169 / 2.170 Å to 2.304 / 2.314 Å, leading to the formation of the SO42- vacancy. The substitution of CrO42- for SO42- vacancy was spontaneous and tendentious, with -1076.58 kJ/mol energy change. This work revealed a hidden passivation "passageway" to Cr via the regulation of sulfur fixation products in co-combustion ash of dyeing sludge and biomass, offering a potential possibility for in-situ passivation to Cr/Cr (VI). SYNOPSIS: This work proposes a practicable method to adjust the interaction between by-products (sulfate and chromium) to in-situ solve the Cr/Cr (VI) leaching "puzzle" from silico-aluminous co-combustion ash of dyeing sludge and biomass.

A novel graphene oxide functionalized hydrocalumite/cellulose composite for the selective and simultaneous removal of tetracycline and Cr(VI)

Tetracycline antibiotic and hexavalent chromium removal from the wastewater is crucial for preventing future environmental trouble. This study aimed to develop an eco-friendly biocomposite made from an enhanced graphene oxide-functionalized hydrocalumite/cellulose composite for co-adsorbative removal of TC antibiotic and toxic Cr(VI). The synthesized GO@CellHC composite was characterized using various microscopic techniques. The GO@CellHC composite possessed the superior removal for TC and Cr(VI), achieving 27.4 and 42.6 mg/g in single systems, and 24.8 and 39.6 mg/g in binary systems, all within 40 min. In pH results, the maximum removal was observed at an acidic pH of 3 for Cr(VI) and 5 for TC, respectively. The co-ions results demonstrated that the composite efficiently removed both pollutants, except in the presence of PO43- and CO32-. The Langmuir isotherm indicated the strongest adsorption capacity and favored both systems. Thermodynamic studies revealed that the adsorption of both systems onto the GO@CellHC composite removes TC and Cr(VI) by endothermic and spontaneous system. Kinetic results demonstrated that TC adsorption showed a higher rate constant k2 (single: 0.01676 min-1 and binary: 0.0138 min-1) compared to Cr(VI) adsorption (single: 0.01478 min-1 and binary: 0.01007 min-1). The GO@CellHC composite retained more than 80 % after three cycles, and field results suggesting that the biocomposite can be utilized for the removal of binary water pollutants.

Sustainable, highly effective selenate removal using electrochlorination facility-obtained magnesium precipitate: An approach to in situ layered double hydroxide formation

We proposed a sustainable selenate (Se(VI)) removal method using in situ layered double hydroxide (LDH) formation and calcined magnesium precipitate (CMP) derived from an electrochlorination facility. During kinetic experiments, the optimal removal conditions were identified by adjusting pH and Al dosage, which enabled a notable Se(VI) removal efficiency (127 mg/g-CMP). The initial release of Mg ions from CMP was confirmed to occur via Al-ion hydrolysis. Subsequently, after the pH adjustment process, Se(VI) could be sequestered via outer-sphere complexation within the interlayer space of the brucite-like sheets in LDH. The reusability of precipitated sludges (LDHS and calcined LDHS (LDOS)), which can be secondary wastes, was also evaluated as Se(VI) adsorbents. The results confirmed the high maximum adsorption capacity of LDOS (42.1 mg/g), demonstrating its performance comparable to that of reported adsorbents. This study highlights the potential of the in situ LDH formation method for Se(VI) removal and the possibility of transforming magnesium precipitate into sustainable resources.

Effective adsorption of Cr(VI) from aqueous solution by Mg-Fe LDH supported on orange peel activated carbon: isotherm, kinetic, thermodynamics and mechanism studies

The toxic Cr(VI) contaminating water released from the metallurgical, dyeing, and electroplating industries is getting worse day by day and is extremely hazardous to human health. Thus, the development of a cost-effective, quick, and efficient adsorbent is highly essential for the Cr(VI) decontamination from wastewater. Herein, a microwave-assisted carbon-based composite called Mg-Fe LDH@OPAC was prepared by assembling Mg-Fe LDH onto orange peel-activated carbon (OAPC). Prior to investigating deeply into the adsorption behavior of the composite, the Mg-Fe LDH@OPAC formation was confirmed by using instrumental techniques like FESEM, EDS, Zeta potential, XRD, FTIR, Raman, XPS, and BET analyzer. The material had a high surface area of 143.9 m2/g and showed a good monolayer Langmuir uptake capacity of 118.36 mg/g. Under ideal circumstances, the maximum amount of Cr(VI) was removed within just 120 min and showed high efficiency in the presence of other coexisting anions respectively. The adsorption was accounted by pseudo-second-order kinetics and spontaneous in nature. Ultimately, a possible adsorption mechanism was suggested, confirmed by XPS studies; which showed that oxidation-reduction, electrostatic interaction, and surface complexation reaction were responsible for Cr(VI) adsorption on Mg-Fe LDH@OPAC surface.

Silver 4,4'-Vinylenedipyridine Coordination Polymers: Linker Effects on Formation Thermodynamics and Anion Exchange

Four new and one previously reported silver 4,4'-vinylenedipyridine (Vpe) coordination polymers were tested as anion exchange materials to assess their potential for pollutant sequestration and compared to analogous silver 4,4'-bipyridine (bipy) coordination polymers. The materials were synthesized using nitrate, tetrafluoroborate, perchlorate, perrhenate, or chromate as the anion to produce cationic coordination polymers with solubilities ranging from 0.0137(7) to 0.21(5) mM. These values are much lower than silver bipy coordination polymers [0.045(3) to 5.5(5) mM] and agree with thermochemical calculations. [Ag(Vpe)+][BF4-], [Ag2(Vpe)2.52+][CrO42-]·5H2O, and [Ag(Vpe)+][ReO4-]·2H2O structures are reported. Perrhenate and chromate ions in an equimolar solution were fully adsorbed by [Ag(Vpe)+][NO3-]·3H2O [620(2) and 137.1(6) mg/g, respectively] as well as by [Ag(Vpe)+][BF4-] [661.8(3) and 190(3) mg/g, respectively] via anion exchange. DFT calculations show that torsional energetics play a significant role in the formation thermodynamics by reducing the energy cost by as much as 4.8 kJ/mol when bipy is replaced with Vpe in silver-based coordination polymers. The results obtained with the flat Vpe ligand highlight the potential role of coordination polymers in practical anion exchange.

Effect of Soil-pH, temperature and moisture content on sorption dynamics of metformin and erythromycin

The rising soil-groundwater quality issues due to pharmaceuticals and personal care products (PPCPs) contamination have spurred significant concern. To understand the sorption characteristics of metformin (MTN) and erythromycin (ETM) in sandy and sandy loam soils with varying organic matter and particle composition, sorption kinetics (single and competitive), isotherms, and thermodynamics were studied. The effects of pH and soil moisture content (SMC) were also investigated at environmentally relevant concentrations. The equilibrium time of MTN and ETM sorption by the three soils in a competitive solute system was about 4 h, and the sorption process was in line with a pseudo-second-order model. The rate-determining step in the process involved both intraparticle diffusion and liquid film diffusion mechanisms for the two PPCPs. The highest pollutant uptake occurred in soils with higher organic matter, driven by enhanced H-bonding, electrostatic interactions, and π-π and n-π interactions facilitated by the organic matter. The equilibrium data in the three soils was well described by the Freundlich model and confirmed favourable adsorption (1/nf = 1.01-1.90). The sorption coefficient (Kd) on the three soils ranged from 2.1 to 332 L/kg for MTN and from 6.25 to 845 L/kg for ETM. The adsorption process was feasible at 293 K and 303 K (ΔG° = - 0.16 to -10.24 kJ/mol), physical and exothermic in nature (ΔH° = -75.21 to -10.30 kJ/mol) for both the contaminants. Observed alterations in Qe with pH confirmed the participation of electrostatic interactions. A low SMC favoured both MTN and ETM sorption onto the sandy soil. Overall, ETM exhibits higher expected sorption, whereas MTN has a greater tendency for migration in the soils and is thus liable to contaminate the groundwater. The study accentuates novel insights into the transport and fate of MTN and ETM in soil-groundwater systems at environmentally relevant concentrations.

Preparation of Poly(allylamine Hydrochloride) Grafted Porous Boron Nitride Fibers for Efficient Cr(VI) Adsorption from Aqueous Solution

Cr(VI) pollution poses great harm to the cyclic utilization of groundwater and surface water resources. Efficient adsorbent materials have great potential to change this situation and assist in the restoration of ecosystems. This work chooses porous boron nitride fibers (pBN) with stable physical and chemical properties as the matrix, 3-aminopropyltriethoxysilane (APTES) as the coupling agent, and uses a one-step crosslinking method to graft poly(allylamine hydrochloride) (PAH) onto pBN, forming pBN-AS@PAH with fascinating Cr(VI) adsorption capacity. PAH is uniformly covered and modified on the surface of pBN, and the composite with high specific surface area (383.33 m2/g), large pore volume (0.37 cm3/g), and abundant amino groups. Its equilibrium adsorption capacity for Cr(VI) can reach up to 123.32 mg/g, and the adsorption behavior follows the quasi second-order kinetic model and Langmuir model, indicating the chemical adsorption process of monolayer. The adsorption style belongs to a spontaneous exothermic process and has the optimal adsorption effect at a pH of ~2. Additionally, after cycling for 5 times, the decrease rate of adsorption capacity is less than 10 %, showing an excellent reusability.

Enhancing Analytical Potential for Ultratrace Analysis of Inorganic Oxyanions Using Extraction Procedures with Layered Double Hydroxides

This article provides an overview of the use of layered double hydroxides (LDHs) as effective sorbents in various extraction methods, including column-based solid-phase extraction (SPE), dispersive solid-phase extraction (DSPE), and magnetic solid-phase extraction (MSPE), for the separation and preconcentration of inorganic oxyanions of chromium, arsenic, and selenium. The primary focus is on enhancing the analytical performance of spectrometric detection techniques, particularly in terms of sensitivity and selectivity when analyzing low concentrations of target analytes in complex matrices. LDHs, which can be readily prepared and structurally modified with various substances, offer promising potential for the development of novel analytical methods. When used in analytical extraction procedures and following careful optimization of experimental conditions, the developed methods have yielded satisfactory results, as documented by studies reviewed in this paper. This review is intended to assist analytical chemists in scientific laboratories involved in developing new extraction procedures.

Sustainable soil rehabilitation with multiple network structures of layered double hydroxide beads: Immobilization of heavy metals, fertilizer release, and water retention

The remediation of heavy metal-contaminated soils necessitated a holistic approach that encompassed water and fertilizer conservation alongside soil property restoration. This study introduced the synthesis of (poly)acrylamide-layered double hydroxide gel spheres (PAM-LDH beads), which were designed to simultaneously immobilize heavy metals, control the release of fertilizers, and enhance soil water retention. Laboratory soil experiments under diverse conditions highlighted the superior performance of PAM-LDH beads in the immobilization of hexavalent chromium (Cr(VI)). The layered double hydroxide (LDH) component was identified as the key player in Cr(VI) immobilization, with anion exchange being the predominant mechanism. Notably, the encapsulated urea within the beads was released independently of environmental influences, governed by a concentration gradient across the beads surface. This release process was characterized by an initial phase of absorptive swelling followed by a diffusive phase. The impact on plant growth was assessed, revealing that PAM-LDH beads significantly curtailed Cr(VI) accumulation and alleviated its phytotoxic effects. Changes in the carbon (C) and nitrogen (N) content of the plants suggested that the urea encapsulated within the beads served as a nutrient source, contributing to soil fertility. Moreover, the water-holding capacity and soil-water characteristic curves of PAM-LDH beads suggested that these superabsorbent beads could delay soil water evaporation. The observed shifts in microbial community structure provided evidence for the enhancement of soil carbon and nitrogen cycles, indicative of improved soil properties.

Preparation of composites with MgAl-LDH-modified commercial activated carbon for the quick removal of Cr(VI) from aqueous solutions

The problem of soil and water contamination caused by Cr(VI) discharged from the dyeing, electroplating, and metallurgical industries is becoming increasingly serious, posing a potentially great threat to the environment and public health. Therefore, it is crucial to develop a fast, efficient, and cost-effective adsorbent for remediating Cr-contaminated wastewater. In this work, MgAl-LDH/commercial-activated carbon nanocomposites (LDH-CACs) are prepared with hydrothermal. The effects of preparation and reaction conditions on the composite properties are first investigated, and then its adsorption behavior is thoroughly explored. Finally, a potential adsorption mechanism is proposed by several characterizations like SEM-EDS, XRD, FTIR, and XPS. The removal of Cr(VI) reaches 72.47% at optimal conditions, and the adsorption study demonstrates that LDH-CAC@1 has an extremely rapid adsorption rate and a maximum adsorption capacity of 116.7 mg/g. The primary removal mechanisms include adsorption-coupled reduction, ion exchange, surface precipitation, and electrostatic attraction. The reusability experiment illustrates that LDH-CAC@1 exhibits promising reusability. This study provides an effective adsorbent with a remarkably fast reaction, which has positive environmental significance for the treatment of Cr(VI) wastewater.

A promising approach for the removal of hexavalent and trivalent chromium from aqueous solution using low-cost biomaterial

Heavy metal pollution is an enduring environmental challenge that calls for sustainable and eco-friendly solutions. One promising approach is to harness discarded plant biomass as a highly efficient environmental friendly adsorbents. In this context, a noteworthy study has spotlighted the employment of Euryale ferox Salisbury seed coat (E.feroxSC) for the exclusion of trivalent and hexavalent chromium ions. This study aims to transform discarded plant residue into a novel, environmentally friendly, and cost-effective alternative adsorbent, offering a compelling alternative to more expensive adsorption methods. By repurposing natural materials, we can contribute to mitigating heavy-metal pollution while promoting sustainable and economically viable solutions in environmental remediation. The effect of different parameters, i.e., chromium ions' initial concentration (5-25 mg L-1), solution pH (2-7), adsorbent dosage (0.2-2.4 g L-1), contact time (20-240 min), and temperature (298-313 K), were investigated. E.feroxSC proved highly effective, achieving 96.5% removal of Cr(III) ions at pH 6 and 97.7% removal of Cr(VI) ions at pH 2, with a maximum biosorption capacity of 18.33 mg/g for Cr(III) and 13.64 mg/g for Cr(VI), making it a promising, eco-friendly adsorbent for tackling heavy-metal pollution. The adsorption process followed the pseudo-second-order kinetic model, aligning well with the Langmuir isotherm, exhibited favorable thermodynamics, and was characterized as feasible, spontaneous, and endothermic with physisorption mechanisms. The investigation revealed that E.feroxSC effectively adsorbed Cr(VI) which could be rejuvenated in a basic solution with minimal depletion in its adsorption capacity. Conversely, E.feroxSC's adsorption of Cr(III) demanded rejuvenation in an acidic milieu, exhibiting comparatively less efficient restoration.

KHCO3-activated high surface area biochar derived from brown algae: A case study for efficient adsorption of Cr(VI) in aqueous solution

The current study aimed to assess the effectiveness of biochar formed from algae in the removal of Cr(VI) through the process of impregnating brown algae Sargassum hemiphyllum with KHCO3. The synthesis of KHCO3-activated biochar (KBAB-3), demonstrating remarkable adsorption capabilities for Cr(VI), was accomplished utilizing a mixture of brown algae and KHCO3 in a mass ratio of 1:3, followed by calcination at a temperature of 700 °C. Based on the empirical evidence, it can be observed that KBAB-3 shown a significant ability to adsorb Cr(VI) within a range of 60-160 mg g-1 across different environmental conditions. In addition, the KBAB-3 material demonstrated the advantageous characteristic of easy separation, allowing for the continued maintenance of a high efficiency in removing Cr(VI) even after undergoing numerous cycles of reuse. In conclusion, the application of KBAB-3, a novel adsorbent, exhibits considerable prospects for effective removal of Cr(VI) from diverse water sources in the near future.

A karst-inspired hierarchical Mg/Al layered double hydroxide with a high entropy-driven process for interception and storage

Karstification plays a crucial role in forming magnificent scenery, and storing oil, natural gas, mineral resources, and water. Through the inspiration of karstification, a hierarchical layered double hydroxide (LDH) with funnel-like and cave-like structures (called Karst-LDH) is formed by the dissolution of acrylic acid/water solution. Meanwhile, the results of transmission electron microscopy (TEM) and scanning electron microscopy (SEM) show that Karst-LDH has complicated and interconnected internal pipe networks. The actual maximum phosphate adsorption capacity of Karst-LDH reaches 126.38 mg g-1 due to the unique structures, protonation, ligand exchange, ion exchange, and hydrogen bonding, which is over ten times that of general LDH with a regular hexagonal structure. The results of isotherms and thermodynamics also indicate that Karst-LDH conforms to more heterogeneous and multilayer adsorption with a higher entropy-driven process. Karst-LDH exhibits good selectivity for chloride and nitrate ions. The change in the frontier orbital interaction between phosphate and different LDHs is a significant reason for quick macropore transmission, mesopore interception, and finally, phosphate storage in Karst-LDH. This work provides an efficient way for the design and fabrication of high adsorption performance materials with unique karst-type structures, which can be used for multiple fields potentially.

Innovative Sol-gel functionalized polyurethane foam for sustainable water purification and analytical advances

Nanomaterial combined polymeric membranes such as polyurethane foams (PUFs) have garnered enormous attention in the field of water purification due to their ease of management and surface modification, cost-effectiveness, and mechanical, chemical, and thermal properties. Thus, this study reports the use of novel Sol-gel impregnated polyurethane foams (Sol-gel/PUFs) as new dispersive solid phase microextractors (d- µ SPME) for the efficient separation and subsequent spectrophotometric detection of Eosin Y (EY) textile dye in an aqueous solution with a pH of 3-3.8. The Sol gel, PUFs, and Sol gel-impregnated PUFs were characterized using scanning electron microscopy (SEM), goniometry measurements, dynamic light scattering (DLS), energy dispersive spectroscopy (EDS), UV-Visible, and FTIR spectra. Batch experiment results displayed a remarkable removal percentage (96% ± 5.4%) of the EY from the aqueous solution, with the total sorption time not exceeding 60 min. These data indicate rate-limited sorption via diffusion and/or surface complex ion associate formations after the rapid initial sorption steps. A pseudo-second order kinetic model thoroughly explained the sorption kinetics, providing a sorption capacity (qe) of 37.64 mg g-1, a half-life time (t1/2) of 0.8 ± 0.01 min, and intrinsic penetration control dye retention. The thermodynamic results revealed a negative value for ΔG⁰ (-78.07 kJ mol-1 at 293 K), clearly signifying that the dye uptake was spontaneous, as well as a negative value for ΔH⁰ (-69.58 kJ mol-1) and a positive value for ΔS⁰ (147.65 J mol-1 K-1), making clear the exothermic nature of EY adsorption onto the sorbent, with a growth in randomness at the molecular level. A ternary retention mechanism is proposed, involving the "weak base anion exchanger" of {(-CH2-OH+ -CH2-) (Dye anion)-}Sol-gel/PUF and/or {(-NH2 + -COO-) (Dye anion)-}Sol-gel/PUF via solvent extraction and "surface adsorption" of the dye anion on/in the Sol-gel/PUFs membranes in addition to H-bonding, including surface complexation and electrostatic π-π interaction, between the dye and the silicon/zirconium oxide (Si-O-Zr) and siloxane (Si-O-Si) groups on the sorbent. Complete extraction and recovery (93.65 ± 0.2, -102.28 ± 2.01) of EY dye with NaOH (0.5 M) as a proper eluting agent was achieved using a sorbent-packed mini column. In addition, the established extractor displayed excellent reusability and does not require organic solvents for EY enrichment in water samples, making it a talented nominee as a novel sorbent for EY sorption from wastewater. This study is of great consequence for expanding the applicatio1n of Sol-gel/PUFs in developing innovative spectrophotometric sensing strategies for dye determination. In view of this, it would also be remarkable to perform future studies to explore the analytical implications of this extractor regarding safety and environmental and public health issues associated to the pollutant.

Weathered Coal-Immobilized Microbial Materials as a Highly Efficient Adsorbent for the Removal of Lead

Most research on immobilized microorganisms employs biomass charcoal as a carrier, but limited studies explore coal-based resources for microbial immobilization. Herein, lead-resistant functional strains were immobilized using weathered coal as a carrier, resulting in the development of a weathered coal-immobilized microbial material (JK-BW) exhibiting high efficiency in lead removal from solutions. A quadratic polynomial model for the adsorption capacity and adsorption rate of JK-BW on Pb2+ was developed using the Box-Behnken method to determine the optimal adsorption conditions. The Pb2+ adsorption mechanism of JK-BW was studied through batch adsorption and desorption experiments along with SEM-EDS, BET, FT-IR, and XPS analyses. Findings indicated that optimal conditions were identified at 306 K temperature, 0.36 g/L adsorbent dosage, and 300 mg/L initial solution concentration, achieving a peak adsorption performance of 338.9 mg/g (308 K) for the immobilized material, surpassing free cell adsorption by 3.8 times. Even after four cycles of repeated use, the material maintained its high adsorption capacity. Pb2+ adsorption by JK-BW involved monolayer chemisorption with ion exchange, complexation, precipitation, physical adsorption, and microbial intracellular phagocytosis. Ion exchange accounted for 22-42% and complexation accounted for 39-57% of the total adsorption mechanisms, notably involving exchanges with K, Ca, Na, and Mg ions as well as complexation with -OH, -COOH, CO-OH, -COOH, CO-, NH2, and the β-ring of pyridine for Pb2+ adsorption.

NiFe Layered Double Hydroxides with Controlled Composition and Morphology for the Efficient Removal of Cr(VI) from Water

A layered double hydroxide (LDH) composed of Ni2+ and Fe3+ with a Fe3+/(Ni2+ + Fe3+) ratio of 0.05, which is not commonly available, was successfully prepared by coprecipitation from an aqueous solution of glycerol containing nickel nitrate and iron nitrate. Precipitation using NaOH as a precipitating agent at room temperature or 120 °C under hydrothermal conditions gave products with micrometer-sized aggregates of nanometer-sized unshaped particles, while that using urea yielded LDHs with a foam-like porous architecture composed of platy particles with a size of 100-300 nm. The products were examined to remove Cr(VI) from an acidic (pH = 3) aqueous solution of K2Cr2O7 by adsorption and photocatalytic reduction. The foam-like porous NiFe-LDH exhibited the highest adsorbed amount (122 mg g-1) and rate (0.017 g mg-1 min-1) in the dark and the highest rate (0.012 min-1) of photocatalytic Cr(VI) reduction among the NiFe-LDHs prepared in the present study, which can be explained as a positive effect of the foam-like porous architecture. These performances were superior to those of other reported LDHs, showing the importance of the composition and the particle morphology to boost the removal of Cr(VI).

Biomass based biochar production approaches and its applications in wastewater treatment, machine learning and microbial sensors

Biochar is a stable carbonaceous material derived from various biomass and can be utilized as adsorbents, catalysts and precursors in various environmental applications. This review discusses various feedstock materials and methods of biochar production via traditional as well as modern approaches. Additionally, the biochar characteristics, HTC process, and its modification by employing steam and gas purging, acidic, basic / alkaline and organo-solvent, electro- and magnetic fields have been discussed. The recent biochar applications for real water, wastewater and industrial wastewater for the abstraction of environmental contaminants also reviewed. Moreover, applications in machine learning and microbial sensors were discussed. In the meantime, analyses on commercial and environmental profit, current ecological concerns and the future directions of biochar application have been well presented.

Insights into the proton-enhanced mechanism of hexavalent chromium removal by amine polymers in strong acid wastewater: Reduction of hexavalent chromium and sequestration of trivalent chromium

Adsorption is a green technology of treating heavy metal-contaminated strong acid wastewaters for the recycling of heavy metal and reuse of strong acid. Herein, three amine polymers (APs) with different alkalinities and electron donating abilities were prepared to investigate the adsorption-reduction processes of Cr(VI). It was found that the removal of Cr(VI) was controlled by the concentration of -NRH+ on the surface of APs at pH > 2, which relies on the alkalinity of APs. However, the high concentration of NRH+ significantly facilitated the adsorption of Cr(VI) on the surface of APs and accelerated the mass transfer between Cr(VI) and APs at strong acid environment (pH ≤ 2). More importantly, the reduction of Cr(VI) was enhanced at pH ≤ 2, due to the high reduction potential of Cr(VI) (E ≥ 0.437). The ratio of reduction to adsorption (α) of Cr(VI) was above 0.70, and the proportion of Cr(III) bonding on Ph-AP excessed 67.6 %. Finally, a proton-enhanced mechanism of Cr(VI) removal was verified by analyzing FTIR and XPS spectra as well as constructing DFT model. This study provides a theoretical basis for the removal of Cr(VI) in the strong acid wastewater.

Sol-Gel Functionalized Polyurethane Foam-Packed Mini-Column as an Efficient Solid Extractor for the Rapid and Ultra-Trace Detection of Textile Dyes in Water

Textile dyes widely used in industrial products are known as a major threat to human health and water ecological security. On the other hand, sol gel represents a principal driver of the adoption of dispersive solid-phase microextractors (d-µ SPME) for pollutants residues in water. Thus, the current study reports a new and highly rapid and highly efficient hybrid sol-gel-based sponge polyurethane foam as a dispersive solid-phase microextractor (d-µ-SPME) platform packed mini-column for complete preconcentration and subsequent spectrophotometric detection of eosin Y textile dye in wastewater. The unique porous structure of the prepared sol-gel immobilized polyurethane foams (sol-gel/PUF) has suggested its use for the complete removal of eosin Y dye (EY) from water. In the mini-column, the number (N) of plates, the height equivalent to the theoretical plates (HETP), the critical capacity (CC), and the breakthrough capacities (BC) of the hybrid sol-gel-treated polyurethane foams towards EY dye were determined via the breakthrough capacity curve at various flow rates. Under the optimum condition using the matrix match strategy, the linear range of 0.01-5 µg L-1, LODs and LOQs in the range of 0.006 µg L-1, and 0.01 µg L-1 for wastewater were achieved. The intra-day and inter-day precisions were evaluated at two different concentration levels (0.05 and 5 μg L-1 of dye) on the same day and five distinct days, respectively. The analytical utility of the absorbents packed in pulses and mini-columns to extract and recover EY dye was attained by 98.94%. The column could efficiently remove different dyes from real industrial effluents, and hence the sol-gel/PUF is a good competitor for commercial applications. The findings of this research work have strong potential in the future to be used in selecting the most suitable lightweight growing medium for a green roof based on stakeholder requirements. Therefore, this study has provided a convenient pathway for the preparation of compressible and reusable sponge materials from renewable biomass for efficient removal of EY from the water environment.

Synthesis and characterization of new biocatalyst based on LDH functionalized with l-asparagine amino acid for the synthesis of tri-substituted derivatives of 2, 4, 5-(H1)-imidazoles

In this study, a new and recyclable biocatalyst (MgAl CO3-LDH@Asn) was synthesized by immobilizing l-asparagine amino acid (Asn) on the surface of 3-(chloropropyl)-trimethoxysilane modified MgAl CO3-layered double hydroxide (LDH). The physicochemical properties of the samples were identified by Fourier transform infrared (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and thermogravimetric analysis (TGA) techniques. The MgAl CO3-LDH@Asn was employed in the multi-component assembly process for the synthesis of tri-substituted derivatives of 2,4,5-(H1)-imidazoles from benzyl, various benzaldehyde derivatives, and ammonium acetate. For optimizing the reaction, the main factors, including the amount of MgAl CO3-LDH@Asn, type of solvent, reaction time, and temperature were evaluated. The optimum conditions of the model reaction were achieved using 20 mg of MgAl CO3-LDH@Asn biocatalyst in ethanol solvent after 20 min at reflux temperature. According to the findings above, the results indicated that high-yield products are achieved within a short time frame. Moreover, the high catalytic activity of the MgAl CO3-LDH@Asn was maintained for four cycles without significantly diminishing its performance.

Recent Progress of Layered Double Hydroxide-Based Materials in Wastewater Treatment

Layered double hydroxides (LDHs) can be used as catalysts and adsorbents due to their high stability, safety, and reusability. The preparation of modified LDHs mainly includes coprecipitation, hydrothermal, ion exchange, calcination recovery, and sol-gel methods. LDH-based materials have high anion exchange capacity, good thermal stability, and a large specific surface area, which can effectively adsorb and remove heavy metal ions, inorganic anions, organic pollutants, and oil pollutants from wastewater. Additionally, they are heterogeneous catalysts and have excellent catalytic effect in the Fenton system, persulfate-based advanced oxidation processes, and electrocatalytic system. This review ends with a discussion of the challenges and future trends of the application of LDHs in wastewater treatment.

Antibacterial and Photocatalytic Activities of LDH-Based Sorbents of Different Compositions

Layered double hydroxides (LDHs) play a fundamental role in the processes for the abatement of pollutants in water, with reference to heavy metal decontamination. The research on the topic is multiobjective target oriented, aiming at combining environmental remediation with the possibility of reusing a sorbent as many times as possible, turning it into a renewable resource. In this study, the antibacterial and catalytic properties of a ZnAl-SO₄ LDH and its resulting product after being subjected to a Cr(VI) remediation process are compared. Both solid substrates have also been tested after undergoing a thermal annealing process. The sorbent (previously described and tested for remediation) has been investigated for its antibacterial activity in view of further surgery and drug delivery applications. Finally, its photocatalytic properties have been experimentally tested in the degradation of a model pollutant, i.e., Methyl Orange (MO), under solar-simulated light. Identifying the best recycling strategy for these materials requires an accurate knowledge of their physicochemical properties. The results show that both the antimicrobial activity and the photocatalytic performance may considerably improve after thermal annealing.

CaFe-layered double hydroxide corn straw biochar reduced heavy metal uptake by Brassica campestris L. and Ipomoea aquatic F.: Rhizosphere effects and oxidative stress alleviation

In the present study, CaFe-layered double hydroxide corn straw biochar (CaFe-LDH@CSB) was applied to the rhizosphere soil of both pakchoi (Brassica campestris L. ssp. Chinensis Makino, B. campestris L.) and water spinach (Ipomoea aquatic F., I. aquatic F.) to explore and clarify the potential mechanism by which CaFe-LDH@CSB helps vegetables reduce heavy metal (HM) uptake and alleviate oxidative stress. Pot experiments were conducted with CaFe-LDH@CSB applied at four levels: control (CK), T1 (5 g kg^-1), T2 (10 g kg^-1) and T3 (20 g kg^-1). The results indicated that the application of CaFe-LDH@CSB significantly increased pH and decreased the acid-soluble forms of Cd, Pb, Zn and Cu in the rhizosphere soil of both B. campestris L. and I. aquatic F.; decreases of 39.4%, 18.0%, 10.0% and 33.3% in B. campestris L. and of 26.6%, 49.1%, 13.2% and 36.8% in I. aquatic F., respectively, were observed at the T3 level. Moreover, CaFe-LDH@CSB application reduced HM uptake by B. campestris L. and decreased HM-induced oxidative stress through the regulation of soil physicochemical properties and microbial abundance. For B. campestris L., variations in Sordariomycetes helped alleviate the accumulation of HMs in the aerial part, while GSH and -SH from the nonenzymatic system played an important role in scavenging H₂O₂ in leaves, thus helping B. campestris L. alleviate HM-induced oxidative stress. For I. aquatica F., variations in Vicinamibacteria and Mortierellomycetes helped alleviate the accumulation of HMs in plants, while GSH and PCs from nonenzymatic systems played an important role in removing ·O₂^- in leaves, thereby helping I. aquatica F. alleviate HM-induced oxidation stress. Our study indicated that the application of CaFe-LDH@CSB improved the rhizosphere soil environment and rebuilt the soil microbial community, helping B. campestris L. and I. aquatica F. alleviate HM-induced oxidative stress and promoting the growth of both vegetables.

Fe12LaO19 fabricated biochar for removal of phosphorus in water and exploration of its adsorption mechanism

Phosphorus (P) runoff from untreated wastewater and agricultural runoff has become an issue of concern because excessive P is detrimental to the health of water bodies and aquatic organisms such as fishes. Hence, different methods are being developed to salvage this challenge. However, most of the methods are expensive, while some are unsustainable. In this study, a simple method was employed in fabricating an absorbent through the co-precipitation of iron and lanthanum on the matrix of biochar prepared from the spent coffee ground for P uptake. The adsorbent named Fe₁₂LaO₁₉@BC was able to attain equilibrium fast within 60 min when used to adsorb P with 98% P removal within the first 30 min Fe₁₂LaO₁₉@BC also maintained high P adsorption across a pH range of 3-7. In the presence of other anions (SO₄^2-, CO₃^2-, NO₃^-, Cl^-, HCO₃^-) in the solution, Fe₁₂LaO₁₉@BC enabled 71.5-97.8% uptake of P. 81.58 mg P/g maximum adsorption capacity at was reached at 40 °C. The reusability test reveals that about 60% of P uptake was maintained after five adsorption cycles with almost an undisturbed desorption efficiency. The negative value of ΔG°, as shown by the thermodynamic analysis, indicates a favorable and spontaneous reaction during P removal by Fe₁₂LaO₁₉@BC. The XRD analysis showed a major peak corresponding to Fe₁₂LaO_19, which is believed to have facilitated the adsorption of P. The adsorption was controlled by multiple mechanisms. An overview of the study indicates Fe₁₂LaO₁₉@BC as a promising adsorbent for the removal of P in the water.

Removal of antimony from model solutions, mine effluent, and textile industry wastewater with Mg-rich mineral adsorbents

Naturally occurring layered double hydroxide mineral, brucite (BRU), was compared with hydromagnesite (HYD) and a commercial Mg-rich mineral adsorbent (trade name AQM PalPower M10) to remove antimony (Sb) from synthetic and real wastewaters. The BRU and HYD samples were calcined prior to the experiments. The adsorbents were characterized using X-ray diffraction, X-ray fluorescence, and Fourier transform infrared spectroscopy. Batch adsorption experiments were performed to evaluate the effect of initial pH, Sb concentration, adsorbent dosage, and contact time on Sb removal from synthetic wastewater, mine effluent, and textile industry wastewater. Several isotherm models were applied to describe the experimental results. The Sips model provided the best correlation for the BRU and M10. As for the HYD, three models (Langmuir, Sips, and Redlich-Peterson) fit well to the experimental results. The results showed that the adsorption process in all cases followed the pseudo-second-order kinetics. Overall, the most efficient adsorbent was the BRU, which demonstrated slightly higher experimental maximum adsorption capacity (27.6 mg g-1) than the HYD (27.0 mg g-1) or M10 (21.3 mg g-1) in the batch experiments. Furthermore, the BRU demonstrated also an efficient performance in the continuous removal of Sb from mine effluent in the column mode. Regeneration of adsorbents was found to be more effective under acidic conditions than under alkaline conditions.

Zeolite/ZnAl-layer double hydroxides with different Zn/Al ratios and intercalated anions as the substrate of constructed wetlands: synthesis, characterization and purification effect of Hexavalent chromium

The study aimed to synthesize novel zeolite substrates modified with four types of ZnAl-LDHs including Cl-LDHs(1:1), Cl-LDHs(3:1), CO₃-LDHs(1:1), and CO₃-LDHs(3:1); investigate Cr(VI) removal efficiencies in lab-scale constructed wetlands (CWs); and explore the effect of different Zn/Al ratios and intercalated anions on the removal efficiencies of Cr(VI) by modified zeolite. Different ZnAl-LDHs were prepared by co-precipitation method and coated onto the surface of original zeolite. Field emission scanning electron microscope and energy dispersive spectrometer were used to analyze physicochemical properties of zeolite/ZnAl-LDHs. Obtained results confirmed the successful LDHs-coating modification. The results of both X-ray diffraction and Fourier transform infrared suggested that the typical diffraction peak and functional groups of ZnAl-LDHs were detected in modified zeolites, and the peak of CO₃^2- in CO₃-LDHs at 1362 cm^-1 was stronger and sharper than Cl-LDHs. It could be demonstrated by above results that the synthesis crystallinity and coating effect of CO₃-LDHs was better than Cl-LDHs. Furthermore, it could be found that under the condition of same intercalated anion, LDHs with metal molar ratio of 1:1 had better crystallinity than LDHs with metal molar ratio of 3: 1. Subsequent determination of the removal performance of Cr(VI) by purification experiments revealed that zeolite/Cl-LDHs(3:1) showed the best Cr(VI) removal performance, and the removal rate of Cr(VI) was improved by 32.81% compared with the original zeolite, which suggested that could be an efficient substrate of CWs for Cr(VI) removal. The high crystallinity indicated that the structure of LDHs was stable and it was difficult to remove Cr(VI) by ion exchange. The above explained why the Cr(VI) removal efficiency by zeolite/Cl-LDHs is superior to that by zeolite/CO₃-LDHs under the condition of same metal molar ratio. With the increase of metal molar ratio, the charge density of LDHs layers and intercalated anion increased, thus enhancing the electrostatic attraction of LDHs layers to Cr(VI) and the interlayer anion exchange capacity. However, the effect of charge density on Cr(VI) removal efficiency may be greater than crystallinity on removal efficiency, which could be responsible for the fact that zeolite/ZnAl-LDHs(3:1) had better Cr(VI) removal efficiency than zeolite/ZnAl-LDHs(1:1) under the condition of same intercalated anion.

A novel biosorbent functionalized pillar[5]arene: Synthesis, characterization and effective biosorption of Cr(VI)

Among toxic chemicals, hexavalent chromium (Cr(VI)) is one of the most carcinogenic and toxic pollutants that hostiles to the health of both humans and other living things. Therefore, the removal of Cr(VI) is of great importance to keep our environment clean and tidy. In this study, an easy-make, inexpensive, and natural biosorbent material (Sp-P[5]) was prepared to preserve our environment using a pillar[5]arene based-on sporopollenin microcapsule. The prepared biosorbent was successfully characterized by some techniques such as FTIR, XRD, and SEM. The biosorbent, Sp-P[5], exhibited an open mesoporous structure richly decorated with multi-amine-containing moieties resulting in enhanced Cr(VI) sorption. The sorption behavior of Cr(VI) ions is satisfactorily adapted from the sorption kinetics pseudo-second-order law and the isotherm models to the Langmuir model at different temperatures. The Langmuir model fits at different temperatures (298-328 K) and the maximum sorption capacities of the Cr(VI) ion ranged from 106.38 to 117.26 mg/g. The thermodynamic calculations reveal that the sorption of Cr(VI) ions on the Sp-P[5] is entropy-driven, endothermic, and spontaneous. The prepared biosorbent was also applied to the natural wastewater samples and different ions (chromate and dichromate). The sorption and desorption experiments showed that the sorption efficiency for Cr(VI) ions of the Sp-P[5] decreased to 70.88 % after 8 cycles. As result, the synthesized biosorbent, Sp-P[5], has outstanding potential in the removal of Cr(VI) ions from water bodies and natural wastewater systems.

Fabricating Industry-Compatible Olefin-Linked COF Resins for Oxoanion Pollutant Scavenging

Large-scale and low-cost synthesis of covalent organic frameworks (COFs) to meet the demands of industrial application remains formidably challenge. Here we report using 2,4,6-collidine as monomer to produce a series of highly crystalline olefin-linked COFs by a melt polymerization method. This method enables the kilogram-scale fabrication of self-shaped monolithic robust foams. The afforded COFs possess extremely low cost (<50 USD/kg), superior to all the reported COFs. Furthermore, using one-pot or post-modification methods can conveniently transform neutral COFs to ionic COFs, which can be applied as highly efficient ion-exchange sorbents for scavenging oxoanion pollutants. Remarkably, the superior adsorption capacity of a model oxoanion (ReO₄ ^- ) is the highest among crystalline porous materials reported so far. This work not only expands the scopes of olefin-linked COFs but also enlightens the route for the industrial production of crystalline ion exchange sorbents.

Ultrasonic-assisted preparation of interlaced layered hydrotalcite (U-Fe/Al-LDH) for high-efficiency removal of Cr(VI): Enhancing adsorption-coupled reduction capacity and stability

Cr(VI) contamination in aquatic systems has been a challenge for environmental science researchers. To environmental-friendly, stable, and efficiently remove Cr (VI), a novel layered double hydroxide was prepared through the ultrasonic-assisted co-precipitation method. The ultrasonic-assisted step prevented the Fe²⁺ oxidation, improved the morphology and performance, and finally, the adsorption-coupled reduction capacity and stability were enhanced. By adding U-Fe/Al-LDH (1.0 g/L) for Cr(VI) (100 mg/L), the removal rate reached 82.24%. The removal data were well fitted by the pseudo-second-order kinetic and Langmuir isotherm model. Using U-Fe/Al-LDH can be performed over a wide pH range (2-10), with a theoretical maximum removal capacity of 118.65 mg/g. The Cr(VI) with high toxicity was adsorbed and reduced to low-toxicity Cr(III). In the final phase, stable Cr(III) complex precipitates were generated. After 30 days, the dynamic leaching amounts of total Cr in used U-Fe/Al-LDH-2 were 0.1052 mg/L. Combined with the results of the influence experiment of coexisting anions and oxidants and the SO₄^2- release experiment, the stability of the removal effect and the safety of U-Fe/Al-LDH were proved. In conclusion, U-Fe/Al-LDH-2 is a promising remediation agent and a feasible Cr(VI) removal method for the practical remediation.

Progress in pre-treatment and extraction of organic and inorganic pollutants by layered double hydroxide for trace-level analysis

Continuous release of pollutants into the environment poses serious threats to environmental sustainability and human health. For trace-level analysis of pollutants, layered double hydroxide (LDH) is an attractive option to impart enhanced sorption capability and sensitivity toward pollutants because of its unique layered structure, tunable interior architecture, high anion-exchange capacities, and high porosity (e.g., Zn/Cr LDH/DABCO-IL, Ni/Al LDH, CS-Ni/Fe LDH, SDS-Fe₃O₄@SiO₂@Mg-Al LDH, Boeh/Mg/Al LDH/pC, and Fe@NiAl LDH). In concert with the well-defined analytical methodologies (e.g., HPLC and GC), the LDH materials can be employed to detect trace-level targets (e.g., as low as ∼ 20 fg/L for phenols) in aqueous environments. This review highlights LDH as a promising material for pre-treatment of a variety of organic and inorganic target pollutants in complex real matrices. Challenges and future requirements for research into LDH-based analytical methods are also discussed.

Flexible and easy-handling pristine polypyrrole membranes with bayberry-like vesicle structure for enhanced Cr(VI) removal from aqueous solution

Polypyrrole has been extensively explored for Cr(VI) removal from wastewater towing to the advantages of superior performance, low cost, facile synthesis, and high environmental stability. However, the unsatisfactory adsorption capacity and complicated process of adsorbent separation from aqueous solutions remain a huge challenge, limiting its practical application. Herein, a flexible PPy membrane with bayberry-like vesicle structures (PPy-B) was prepared via template-assisted interfacial polymerization. It was found that sodium sulfosalicylate not only improved the flexibility and strength of the PPy-B membrane for easy-handling but also participated in the polymerization of PPy as a dopant to improve the specific surface area and doping level for increasing adsorption sites. Benefiting from these, the easy-handling PPy-B membrane exhibited a high adsorption capacity (586.90-682.50 mg/g at 298-318 K), a high reusability (five adsorption-desorption cycles), and a high ultimate adsorption capacity after adsorption-desorption cycles until membrane failure (1174.86 mg/g at 298 K). The proposed mechanisms of the enhanced Cr(VI) removal involve electrostatic adsorption, reduction, and ion exchange. This flexible PPy membrane therefore shows attractive advantages in wastewater treatment.

The synthesis of nanocellulose-based nanocomposites for the effective removal of hexavalent chromium ions from aqueous solution

The present study reports the synthesis of a polydopamine (PDA)/nanocellulose (NC) nanocomposite for the effective removal of chromium ions from water. PDA was used to modify NC surface producing a nanocomposite namely PDA/NC, by in situ polymerization of dopamine on the surface of NC. Thereafter, the as-synthesized nanocomposite was characterized using familiar techniques such as Fourier transform infrared, X-ray diffraction, X-ray photoelectron spectroscopy, ultraviolet-visible spectroscopy, and transmission electron microscopy. All results indicated the successful combination of PDA and NC in one nanocomposite. The PDA/NC nanocomposite was evaluated for the removal of hexavalent Cr(vi) ions from an aqueous solution. The adsorption conditions, such as pH, contact time, and initial Cr(vi) concentration, were optimized. Adsorption kinetic studies revealed that Cr(vi) removal on the surface of PDA/NC nanocomposite followed the pseudo-second-order kinetic model. Furthermore, isotherm studies revealed that Cr(vi) removal followed the Langmuir isotherm model with a maximum adsorption capacity (q m) of 210 mg/g. The adsorption mechanism study indicated that the Cr(vi) removal was reached via complexation, adsorption, and chemical reduction. The reusability of a PDA/NC nanocomposite for the removal of Cr(vi) ions was studied up to five cycles with acceptable results. The high adsorption capacity and multiple removal mechanisms validated the effective applicability of PDA/NC nanocomposite as a useful adsorbent for the removal of Cr(vi) ions from aqueous solution.

Comparative Study of M(Ⅱ)Al (M=Co, Ni) Layered Double Hydroxides for Silicone Foam: Characterization, Flame Retardancy, and Smoke Suppression

To compare the different actions of the two representative transition metal cations of Co²⁺ and Ni²⁺ in layered double hydroxides (LDHs), CoAl-LDH and NiAl-LDH intercalated with CO₃²⁻ were synthesized, and the chemical structures, microstructures, and surface areas thereof were successfully characterized. Then, the two LDHs were utilized as flame retardants and smoke suppressants for silicone foam (SiF). The densities, flame retardancy, smoke suppression, thermal stabilities, and compressive strengths of the two SiF/LDHs nanocomposites were investigated. The introduction of LDHs slightly decreased the density of SiF due to the catalytic actions of Co and Ni during the foaming process of SiF. With respect to the flame retardancy, the addition of only 1 phr of either CoAl-LDH or NiAl-LDH could effectively improve the limiting oxygen index of SiF from 28.7 to 29.6%. Based on the results of vertical flame testing and a cone calorimeter test, the flame retardancy and fire safety of the SiF were effectively enhanced by the incorporation of LDHs. In addition, owing to the good catalytic action and large specific surface area (NiAl-LDH: 174.57 m² g⁻¹; CoAl-LDH: 51.47 m² g⁻¹), NiAl-LDH revealed higher efficiencies of flame retardancy and smoke suppression than those of CoAl-LDH. According to the results of energy-dispersive X-ray spectroscopy, Co and Ni participated in the formation of protective char layers, which inhibited the release of SiO₂ into the gas phase. Finally, the influences on the thermal decomposition and compressive strength for SiF resulting from the addition of LDHs are discussed.

Simultaneous removal of cadmium, lead, chromate by biochar modified with layered double hydroxide with sulfide intercalation

In this study, a novel KOH-activated biochar modified with Mg₂Al-LDH with S^2- intercalation (KBC-LDH-S) was proposed for simultaneous adsorption of anions and cations. The adsorption capacity, thermodynamic and kinetic studies, effects of initial temperature and solution pH were investigated. Furthermore, the adsorption characteristics in both single and ternary Pb-Cd-Cr systems were investigated. Comparing with bare biochar, the adsorption capacity of KBC-LDH-S was increased by 387.8 % for Cd²⁺ (190.4 mg/g), 358.1 % for Pb²⁺ (392.2 mg/g), 1106.0 % for total Cr (170.7 mg/g) and 4602 % for Cr⁶⁺ (833.8 mg/g). The S^2- intercalation effectively increased the adsorption capacity of CrO₄^2- by 3370 % and promoted simultaneous adsorption. The interlayer anion exchange and redox reaction occurred between CrO₄^2- and S^2- to generate Cr³⁺, and then promoted the adsorption of CrO₄^2-. Besides, the adsorption amount and total removal efficiency first increased and then decreased with the increasing concentration in the Pb-Cd-Cr ternary system.

Adsorptive removal of heavy metal anions from water by layered double hydroxide: A review

High-valence heavy metals with high ecotoxicity are generally found in water in the form of anions, and this increases heavy metal pollution intensity and treatment difficulty. Recent studies have pointed to the potential efficiency of layered double hydroxides (LDHs) to meet this challenge. In this review, we retrospectively research the development of LDHs using a Java application called CiteSpace. We describe the unique layer structure, highly adjustable chemical properties, and diverse synthesis methods of LDHs, all of which decide the effective adsorption of heavy metal anions by LDHs. Subsequently, we focus on discussing the adsorption mechanism of LDHs on heavy metal anions, as well as the current state of research and future directions for microscopic interaction mechanisms. For practical applications, it is critical to improve the adsorption selectivity and stability. We then recommend solutions to improve the adsorption selectivity and stability after identifying the influencing mechanism. Finally, we provide our perspectives on the future development of LDHs adsorption of heavy metal anions.

Squaramide-Immobilized Carbon Nanoparticles for Rapid and High-Efficiency Elimination of Anthropogenic Mercury Ions from Aquatic Systems

Water pollution due to environmental remediation and poor waste administration in certain areas of the globe signifies a serious problem in acquiring safe and clean drinking water. This problem is especially critical in rural areas, where advanced water purification techniques are deficient, and it remains a daunting task for ecosystem and public health protection. This critical task can be addressed herein by developing scalable poly squaramide-phenyl methacrylamide (PSQ)-functionalized carbon nanoparticles (CNPs) (PSQ-CNPs) with densely populated chelating sites with strong Hg²⁺-binding capacity. The PSQ-CNPs have shown high efficiency in removing Hg²⁺ from aqueous solution, providing a Hg²⁺ capacity of 2840 mg g^-1, surpassing all the amine and thiol-based adsorbents reported hitherto. More significantly, the adsorbent reveals the largest distribution coefficient value (K_d) of 9.09 × 10¹⁰ mL g^-1, which allows it to reduce Hg²⁺ content from 10 ppm to less than 0.011 ppb, well below the United States Environmental Protection Agency (EPA) limits for drinking water standards (2 ppb). The adsorption measurements of the adsorbent followed the Langmuir isotherm model and pseudo-second order. The practical applicability of PSQ-CNPs was verified with the real samples (the lake, river, and industrial wastewater) and has been proven to be excellent. The adsorbent could still retain its Hg²⁺ removal efficacy even after 12 sorption cycles. It is attributed that the remarkable performance of PSQ-CNPs arises from the high-density chelating sites and pores on the surface of CNPs. The present work shows a new benchmark for Hg²⁺-removal adsorbents and presents a novel practical approach for decontaminating Hg²⁺ and other heavy metal ions from wastewater.

Reviewing variables and their implications affecting adsorption of Cr(VI) onto activated carbon: an in-depth statistical case study

Removal of Cr(VI) from the aqueous phase using numerous activated carbons (AC) has been broadly studied in the last decades. Nevertheless, the diversity of activation methods, AC properties, and adsorption conditions precludes the standardization of specific characteristics required to achieve better adsorption results. This work reviewed the pertinent literature on Cr(VI) adsorption onto AC published over the past four decades. Pearson's correlation matrix and principal component analysis (PCA) assisted in identifying the parameters and AC characteristics that have the greatest influence on the maximum adsorption capacity (q_m). Two hundred thirty-six adsorption assays were found reporting data on 110 ACs and different parameters. Of these, 39.8% of the studies contemplated the variables q_m, pH, temperature (T), surface area (S_BET), micropore volume (V_micro), and mesopore volume (V_meso), and only 19.5% reported the point of zero charge (pH_PZC). Statistical analysis disclosed that S_BET and V_micro have a strong positive correlation with q_m, while V_meso, T, and pH show little or no correlation. The difference between pH and pH_PZC (PZC_diff) indicated a significant anticorrelation with q_m, thus evidencing that lower PZC_diff values enhance adsorption. The findings are useful for all researchers that work with Cr(VI) adsorption on AC since they provide a start point concerning the required adsorbent characteristics and process conditions to be employed.

Efficient Adsorption of Chromium Ions from Aqueous Solutions by Plant-Derived Silica

Nowadays, there is great interest in the use of plant waste to obtain materials for environmental protection. In this study, silica powders were prepared with a simple and low-cost procedure from biomass materials such as horsetail and common reed, as well as wheat and rye straws. The starting biomass materials were leached in a boiling HCl solution. After washing and drying, the samples were incinerated at 700 °C for 1 h in air. The organic components of the samples were burned leaving final white powders. These powders were characterized by powder X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), scanning electron microscopy (SEM), and low-temperature nitrogen sorption. The amorphous powders (biosilica) contained mainly SiO2, as indicated by FTIR analysis. Horsetail-derived silica was chosen for testing the removal of dichromate ions from water solutions. This biosilica had a good ability to adsorb Cr(VI) ions, which increased after modification of the powder with the dodecylamine surfactant. It can be concluded that the applied procedure allowed obtaining high purity biosilica from plant waste with good efficiency. The produced biosilica was helpful in removing chromium ions and showed low cytotoxicity to human endothelial cells, suggesting that it can be safely used in environmental remediation.

Efficient Vanadate Removal by Mg-Fe-Ti Layered Double Hydroxide

A series of novel layered double hydroxides (Mg-Fe-Ti-LDHs) containing Mg2+, Fe3+ and Ti4+ were prepared. The adsorption performance of Mg-Fe-Ti-LDHs on vanadate in aqueous solution was investigated and the effects of various factors on the adsorption process were examined, including initial vanadate concentration, adsorbent dosage, contact time, solution pH and coexisting ions. A preliminary discussion of the adsorption mechanism of vanadate was also presented. Results show that the adsorption efficiency of vanadate increased with the introduction of Ti4+ into the laminate of LDHs materials. The adsorption capacity of the materials also differed for different anion intercalated layers, and the Mg-Fe-Ti-LDHs with Cl− intercalation showed higher vanadate removal compared to the CO32− intercalated layer. Furthermore, Mg-Fe-Ti-CLDH showed higher vanadate removal compared to pre-calcination. The adsorption experimental data of vanadate on Mg-Fe-Ti-LDHs were consistent with the Langmuir adsorption isotherm model and the adsorption kinetics followed a pseudo-second order kinetic model. The pH of the solution significantly affected the vanadate removal efficiency. Meanwhile, coexisting ions PO43−, SO42− and NO3− exerted a significant influence on vanadate adsorption, the magnitude of the influence was related to the valence state of the coexisting anions. The possible adsorption mechanisms can be attributed to ion exchange and layered ligand exchange processes. The good adsorption capacity of Mg-Fe-Ti-LDHs on vanadate broadens the application area of functional materials of LDHs.

LDH-TiO2 Composite for Selenocyanate (SeCN-) Photocatalytic Degradation: Characterization, Treatment Efficiency, Reaction Intermediates and Modeling

Selenium as a nutrient has a narrow margin between safe and toxic limits. Hence, wastewater discharges from selenium-containing sources require appropriate treatment that considers health concerns and stringent selenium-related water treatment standards. This work examined the use of a photocatalysis-cum-adsorption system based on a layered double hydroxide coupled with TiO2 (LDH-TiO2) to remove aqueous phase selenocyanate (SeCN−), which is difficult to treat and requires specific treatment procedures. The synthesized LDH and LDH-TiO2 composite samples were characterized using the X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and thermogravimetry analysis (TGA) methods. The XRD results for the uncalcined LDH indicated a hydrotalcite mass with a rhombohedral structure, whereas increasing the calcination temperature indicated transition to an amorphous state. FESEM results for the LDH-TiO2 matrix indicated round titanium dioxide particles and LDH hexagonal layers. The TGA findings for uncalcined LDH showed a gradual decrease in weight up to 250 °C, followed by a short plateau and then a sharp decrease in LDH weight from 320 °C, with a net weight loss around 47%. Based on the characterization and initial selenocyanate adsorption results, the 250 °C calcined LDH-TiO2 matrix was used for the selenocyanate photocatalysis. A ~100% selenium removal was observed using LDH:TiO2 at a 1.5:1 w/w ratio with a 2 g/L dose, whereas up to 80% selenium removal was noted for LDH:TiO2 at a 0.5:1 w/w ratio. The respective difference in the efficiency of selenium treatment was attributed to enhanced LDH-based adsorption sites in the enhanced LDH:TiO2 w/w ratio. Furthermore, the selenite and selenate that occurred during SeCN− photocatalytic degradation (PCD) were also nearly completely removed via adsorption. An optimization exercise using response surface methodology (RSM) for total selenium removal showed R2 values of more than 0.95, with a prediction accuracy of more than 90%. In summary, the present findings show that the use of a photocatalysis-cum-adsorption system based on LDH-TiO2 is a promising technique to treat industrial wastewater discharges for selenocyanate and also remove the resulting intermediates.

Chromium removal from tannery wastewaters with a strong cation exchange resin and species analysis of chromium by MINEQL+

Chromium (III) salts are highly applied for tanning purpose in tannery industries. The purpose of this study was removal and recovery of chromium(III) from tannery wastewater with a strong cation exchange resin. For this purpose, Amberlite 252 ZU was chosen as a strong cation exchange resin. In the first part of this study, The MINEQL+ computer program was applied depending on the optimum concentration and pH for determining Cr species in aqueous solutions. The second part of the work consists of measuring the exchange equilibrium of H+ ions and Cr(III) ions. Therefore, solutions containing fixed amounts of chromium were brought into contact with different amounts of resins. The evaluation of the obtained equilibrium parameters was done by surface complexing theory. Retention and regeneration steps were successfully performed in the column without any significant change up to 10 cycles. Efficiency was between 90 and 98% in removal studies, and between 81 and 92% in recovery studies. The results showed that a strong cation exchange resin Amberlite 252 ZU can be successfully used for chromium removal and recovery.

Single-step removal of arsenite ions from water through oxidation-coupled adsorption using Mn/Mg/Fe layered double hydroxide as catalyst and adsorbent

This study developed a layered double hydroxides (Mn/Mg/Fe-LDH) material through a simple co-precipitation method. The Mn/Mg/Fe-LDH oxidized arsenite [As(III)] ions into arsenate [As(V)] anions. The As(III) and oxidized As(V) were then adsorbed onto Mn/Mg/Fe-LDH. The adsorption process of arseniate [As(V)] oxyanions by Mn/Mg/Fe-LDH was simultaneously conducted for comparison. Characterization results indicated that (i) the best Mg/Mn/Fe molar ratio was 1/1/1, (ii) Mn/Mg/Fe-LDH structure was similar to that of hydrotalcite, (iii) Mn/Mg/Fe-LDH possessed a positively charged surface (pH_IEP of 10.15) and low Brunauer-Emmett-Teller surface area (S_BET = 75.2 m²/g), and (iv) Fe²⁺/Fe³⁺ and Mn²⁺/Mn³⁺/Mn⁴⁺ coexisted in Mn/Mg/Fe-LDH. The As(III) adsorption process by Mn/Mg/Fe-LDH was similar to that of As(V) under different experimental conditions (initial solutions pH, coexisting foreign anions, contact times, initial As concentrations, temperatures, and desorbing agents). The Langmuir maximum adsorption capacity of Mn/Mg/Fe-LDH to As(III) (56.1 mg/g) was higher than that of As(V) (32.2 mg/g) at pH 7.0 and 25 °C. X-ray photoelectron spectroscopy was applied to identify the oxidation states of As in laden Mn/Mg/Fe-LDH. The key removal mechanism of As(III) by Mn/Mg/Fe-LDH was oxidation-coupled adsorption, and that of As(V) was reduction-coupled adsorption. The As(V) mechanism adsorption mainly involved: (1) the inner-sphere and outer-sphere complexation with OH groups of Mn/Mg/Fe-LDH and (2) anion exchange with host anions (NO₃^-) in its interlayer. The primary mechanism adsorption of As(III) was the inner-sphere complexation. The redox reactions made Mn/Mg/Fe-LDH lose its original layer structure after adsorbing As(V) or As(III). The adsorption process was highly irreversible. Mn/Mg/Fe-LDH can decontaminate As from real groundwater samples from 45-92 ppb to 0.35-7.9 ppb (using 1.0 g/L). Therefore, Mn/Mg/Fe-LDH has great potential as a material for removing As.