Deriving hazardous concentrations of phenol in soil ecosystems using a species sensitivity distribution approach

An effective strategy for biodegradation of high concentration phenol in soil via biochar-immobilized Rhodococcus pyridinivorans B403

High concentration of phenol residues in soil are harmful to human health and ecological safety. However, limited information is available on the in-situ bioremediation of phenol-contaminated soil using biochar as a carrier for bacteria. In this study, bamboo -derived biochar was screened as a carrier to assemble microorganism-immobilized composite with Rhodococcus pyridinivorans B403. Then, SEM used to observe the micromorphology of composite and its bioactivity was detected in solution and soil. Finally, we investigated the effects of free B403 and biochar-immobilized B403 (BCJ) on phenol biodegradation in two types of soils and different initial phenol concentrations. Findings showed that bacterial cells were intensively distributed in/onto the carriers, showing high survival. Immobilisation increased the phenol degradation rate of strain B403 by 1.45 times (37.7 mg/(L·h)). The phenol removed by BCJ in soil was 81% higher than free B403 on the first day. Moreover, the removal of BCJ remained above 51% even at phenol concentration of 1,500 mg/kg, while it was only 15% for free B403. Compared with the other treatment groups, BCJ showed the best phenol removal effect in both tested soils. Our results indicate that the biochar-B403 composite has great potential in the remediation of high phenol-contaminated soil.

An Overview of Recycling Phenolic Resin

Over a century ago, phenolic formaldehyde (PF) resin was developed and continues to increase in yield due to its diverse applications. However, PF resin is a thermosetting plastic lacking fluidity and moldability, which are nondegradable in natural environments, leading to severe threats to fossil resources as well as global environmental crises. As a result, recycling PF resin is extremely important. In this review, we provide the recent advances in the recycling of PF resin, which includes mechanical recycling, chemical recycling, and utilization of carbon-based materials. The advantages and disadvantages of each strategy are evaluated from a green chemistry perspective. This article aims to attract interest in PF resin design, synthesizing, application and recycling, offering useful suggestions.

Spherical Lignin-Derived Activated Carbons for the Adsorption of Phenol from Aqueous Media

In this work, a synthesis and activation path, which enabled the preparation of spherical activated carbon from a lignin precursor, characterized by high adsorption capacity in the removal of phenolic compounds from water, was successfully developed. Two industrial by-products, i.e., Kraft lignin and sodium lignosulfonate, were used to form spherical nanometric lignin grains using pH and solvent shift methods. The obtained materials became precursors to form porous activated carbons via chemical activation (using K2CO3 or ZnCl2 as activating agents) and carbonization (in the temperature range of 600-900 °C). The thermal stabilization step at 250 °C was necessary to ensure the sphericity of the grains during high-temperature heat treatment. The study investigated the influence of the type of chemical activator used, its quantity, and the method of introduction into the lignin precursor, along with the carbonization temperature, on various characteristics including morphology (examined by scanning electron microscopy), the degree of graphitization (evaluated by powder X-ray diffraction), the porosity (assessed using low-temperature N2 adsorption), and the surface composition (analyzed with X-ray photoelectron spectroscopy) of the produced carbons. Finally, the carbon materials were tested as adsorbents for removing phenol from an aqueous solution. A conspicuous impact of microporosity and a degree of graphitization on the performance of the investigated adsorbents was found.

Ecological risk assessment for perfluorohexanesulfonic acid (PFHxS) in soil using species sensitivity distribution (SSD) approach

Perfluorohexanesulfonic acid (PFHxS) is one of the persistent organic pollutants that has been recommended to be listed in Annex A of the Stockholm Convention. It has gained increasing attention in recent years due to its toxic effects. The guideline values of PFHxS are commonly associated with PFOS in various countries and regulatory agencies. In this study, multispecies bioassays were conducted to determine the ecological toxic effects of PFHxS, including plants, soil invertebrates, and soil microorganisms, which indicated the EC10/NOEC values ranged from 2.9 to 250 mg/kg. Where possible, logistic models were used to calculate the EC30 values for various endpoints. The species sensitivity distributions were employed to estimate the ecological investigation levels for PFHxS contamination in soils using toxicity results from literature and this study. The calculation using EC10/NOEC values from both literature and this study indicated a most conservative HC5 as 1.0 mg/kg (hazardous concentration for 5 % of the species being impacted). However, utilisation of EC30 values derived from this study resulted in a much higher HC5 for PFHxS in contaminated soils (13.0 mg/kg) which is at the higher end of the existing guideline values for PFOS for protecting ecological systems. The results obtained in this study can be useful in risk assessment processes to minimize any uncertainty using combined values with PFOS.

Occurrence, allocation and geochemical controls for mercury in a typical estuarine ecosystem: Implications for the predictability of mercury species

In this study, surface seawater, bottom seawater and surface sediments were collected from the Yellow River Estuary Area (YREA) and the Laizhou Bay (LB) to investigate the occurrence, spatial distribution and geochemical control factors for total mercury (THg) and methylmercury (MeHg) in different phases. The geochemical characteristics of seawater and sediments suggested significant variances in the YREA and the LB. The high contamination of Hg in the YREA showed the discharge of the Yellow River (YR) contributed significantly to the Hg contamination in the LB. The partial least squares regression (PLSR) model was utilized to explore the complicated interactions between geochemical controls and methylation potentials in different phases. Although the ecological risk (ER) of Hg was not significant in this study area, the higher values of ER in the YREA suggested that the YR was the primary Hg contributor to LB. Therefore, the potential Hg risk should not be ignored.

Exolaccase-boosted humification for agricultural applications

Globally, phenolic contaminants have posed a considerable threat to agro-ecosystems. Exolaccase-boosted humification may be an admirable strategy for phenolic detoxification by creating multifunctional humic-like products (H-LPs). Nonetheless, the potential applicability of the formed H-LPs in agricultural production is still overlooked. This review describes immobilized exolaccase-enabled humification in eliminating phenolic pollutants and producing artificial H-LPs. The similarities and differences between artificial H-LPs and natural humic substances (HSs) in chemical properties are compared. In particular, the agronomic effects of these reproducible artificial H-LPs are highlighted. On the basis of the above summary, the granulation process is employed to prepare granular humic-like organic fertilizers, which can be applied to field crops by mechanical side-deep fertilization. Finally, the challenges and perspectives of exolaccase-boosted humification for practical applications are also discussed. This review is a first step toward a more profound understanding of phenolic detoxification, soil improvement, and agricultural production by exolaccase-boosted humification.

•

Exolaccase-initiated humification is conductive to phenolic detoxification

•

Multiple humic-like products are created in exolaccase-boosted humification

•

Similarities and differences between artificial and natural humus are disclosed

•

Humic-like products can be used to sustain soil health and increase crop yield

Assessment of adverse effects of olive mill waste water and olive mill waste contaminated soil on springtail Folsomia candida

In recent years significant attention has been given to the problem of olive mill waste towards the environment. Still, there is a considerable gap in the knowledge of the impact of the olive mill wastewater (OMWW) and the olive mill waste contaminated soil (OMW CS) on non-target soil organisms. Springtails, as an important group of non-target soil organisms, are frequently used in ecotoxicological research. However, information on olive mill waste impact on the model species Folsomia candida is scarce. Therefore, in this study, we determined the effects of OMWW and OMW CS on survival, reproduction, neurotoxicity, oxidative stress, and available energy in springtail F. candida. The exposure to different ratios of OMWW and OMW CS showed higher toxicity of OMW CS in terms of survival (LC₅₀ = 32.34% of OMWW; LC₅₀ = 45.36% of OMW CS) and reproduction (EC₅₀ = 10.10% of OMWW; EC₅₀ = 19.44% of OMW CS). Furthermore, neurotoxicity (AChE induction), oxidative stress (SOD, GST, and MDA induction), and changes in available energy (decrease in lipid and carbohydrate content) have been observed. Those negative effects are likely consequences of the high phenol content specific to OMWW and OMW CS. Obtained results indicate that for the ecotoxicological assessment of various wastes it is essential to consider different tier level biomarkers to have a clear insight into the mechanism of action.

The structure-activity relationship of aromatic compounds in advanced oxidation processes：a review

Advanced oxidation processes (AOPs) are widely used as efficient technologies to treat highly toxic and harmful substances in wastewater. Taking the most representative aromatic compounds (monosubstituted benzenes, substituted phenols and heterocyclic compounds) as examples, this paper firstly introduces their structures and the structural descriptors studied in AOPs before, and the influence of structural differences in AOPs with different reactive oxygen species (ROS) on the degradation rate was discussed in detail. The structure-activity relationship of pollutants has been previously analyzed through quantitative structure-activity relationship (QSAR) model, in which ROS is a very important influencing factor. When electrophilic oxidative species attacks pollutants, aromatic compounds with electron donating groups are more favorable for degradation than aromatic compounds with electron donating groups. While nucleophilic oxidative species comes to the opposite conclusion. The choice of advanced oxidation processes, the synergistic effect of various active oxygen species and the used catalysts will also change the degradation mechanism. This makes the structure-dependent activity relationship uncertain, and different conclusions are obtained under the influence of various experimental factors.

Recent developments in photocatalysis of industrial effluents ։ A review and example of phenolic compounds degradation

Industrial expansion and increased water consumption have created water scarcity concerns. Meanwhile, conventional wastewater purification methods have failed to degrade recalcitrant pollutants efficiently. The present review paper discusses the recent advances and challenges in photocatalytic processes applied for industrial effluents treatment, with respect to phenolic compounds degradation. Key operational parameters including the catalyst loading, light intensity, initial pollutants concentration, pH, and type and concentrations of oxidants are evaluated and discussed. Compared to the other examined controlling parameters, pH has the highest effect on the photo-oxidation of contaminants by means of the photocatalyst ionization degree and surface charge. Furthermore, major phenolic compounds derived from industrial sources are comprehensively presented and the applicability of photocatalytic processes and the barriers in practical applications, including high energy demand, technical challenges, photocatalyst stability, and recyclability have been explored. The importance of energy consumption and operational costs for realistic large-scale processes are also discussed. Finally, research gaps in this area and the suggested direction for improving degradation efficiencies in industrial applications are presented. In the light of these premises, selective degradation processes in real water matrices such as untreated sewage are proposed.

Long-term degradation of toluene and phenol in soil: Identification of transformation products and pathways via HRMS-based suspect and non-target screening

In this study, the long-term fate of toluene and phenol in the soil was investigated, and the transformation products (TPs) and pathways of these compounds were studied by a high resolution mass spectrometry (HRMS)-based suspect and non-target screening approach for the first time, and 9 and 12 transformation products were identified for toluene and phenol, respectively in the lab-exposed soil samples. Salicylaldehyde, 4-hydroxybenzaldehyde, and benzaldehyde were identified in toluene-contaminated field soil samples for the first time, and the main mechanisms involved in the biodegradation and detoxification of toluene and phenol in soil were oxidation, carboxylation, dehydroxylation, and ring fission amongst others. 2-oxoglutarate, TP165-A, TP165-B, TP172, and TP195 were identified as novel phenol transformation products, while salicylaldehyde, 2-oxoglutarate, TP165-A, and TP165-B were identified as novel toluene transformation products, providing new possible evidence for additional degradation pathways, which could give new insights into the fate of toluene and phenol during the natural attenuation process in the environment. Finally, salicylaldehyde, 4-OH-benzaldehyde, and 4-OH-benzoic acid which were detected at Level 1 identification confidence were suggested as indicator chemicals of toluene and phenol exposure in the contaminated field.

Hydrolyzed urine for enhanced valorization and toxicant degradation of wet coffee processing wastes: Implications for soil contamination and health risk reductions

Coffee pulp (CP) and wastewater, from wet coffee processing plants, pollute water and soil ecosystems unless a greener management system is employed. The aim was to evaluate the effect of hydrolyzed human urine (HU) on the dynamics of total phenol, caffeine, and heavy metals during CP and coffee processing wastewater (CPWW) co-composting. The associated health risks reduction after application for cabbage production was also estimated. For the purpose, five treatments were prepared as C₀ (CP, control), C₁ (CP + CPWW), C₂ (CP + 1:1 CPWW:HU), C₃ (CP + 1:2 CPWW:HU) and C₄ (CP + 1:3 CPWW:HU). The optimum compost was applied for cabbage cultivation in comparison with mineral fertilizer and without fertilization in a greenhouse. The total phenol reduction was in the order of C₁ (77.71%) < C₀ (78.66%) < C₄ (79.89%) < C₃ (91.20%) < C₂ (91.48%), and maximum significant reduction of caffeine was also observed in C₃ (81.34%) and C₂ (82.66%). Pb and Cd were significantly reduced in C₂, and Cr in C₃ with a reduction of 4.38-15.13%, 12.50-33.00%, and 2.94-19.57%, respectively. The bio-concentration factor decreased in the order of Cd > Cr > Ni > Pb with concentrations, hazard quotient, hazard index (along with phenol) < 1, and cancer risk values below 1.00E-04, indicating very little risk. Thus, supplementing HU enhanced degradation of the anti-nutrient factors, and provide compost that enrich soil nutrients with little health risks of application.

Estimation of hazardous concentration of toluene in the terrestrial ecosystem through the species sensitivity distribution approach

Toluene is a highly flammable and commonly used industrial chemical with severe health consequences on humans upon exposure and ingestion. In this study, multispecies bioassays were conducted using a species sensitivity distribution approach to determine acute and chronic hazardous concentrations of toluene in soil. Acute and chronic toluene toxicity tests were conducted with seven soil species from four taxonomic groups. The results from the toxicity tests were used to estimate the acute and chronic HC₅ (hazardous concentration for 5 % of species) of toluene in the terrestrial environment at 58.9 (5.4-639.6) mg kg^-1 and 2.2 (0.2-19.8) mg kg^-1, respectively. To the best of our knowledge, this is the first study to estimate the hazardous concentration of toluene in soil by conducting a battery of bioassays. These values can be used as references for the environmental risk assessment of chemical accidents involving toluene and estimating its impact on soil to protect the terrestrial environment.

Recent Developments in Plasmonic Sensors of Phenol and Its Derivatives

Many scientists are increasingly interested in on-site detection methods of phenol and its derivatives because these substances have been universally used as a significant raw material in the industrial manufacturing of various chemicals of antimicrobials, anti-inflammatory drugs, antioxidants, and so on. The contamination of phenolic compounds in the natural environment is a toxic response that induces harsh impacts on plants, animals, and human health. This mini-review updates recent developments and trends of novel plasmonic resonance nanomaterials, which are assisted by various optical sensors, including colorimetric, fluorescence, localized surface plasmon resonance (LSPR), and plasmon-enhanced Raman spectroscopy. These advanced and powerful analytical tools exhibit potential application for ultrahigh sensitivity, selectivity, and rapid detection of phenol and its derivatives. In this report, we mainly emphasize the recent progress and novel trends in the optical sensors of phenolic compounds. The applications of Raman technologies based on pure noble metals, hybrid nanomaterials, and metal–organic frameworks (MOFs) are presented, in which the remaining establishments and challenges are discussed and summarized to inspire the future improvement of scientific optical sensors into easy-to-operate effective platforms for the rapid and trace detection of phenol and its derivatives.

Perspectives on microalgae as model organisms toward the standardization of soil algal toxicity test methods

When considering test species for soil ecotoxicity, the development of new model organisms is often suggested to increase the reliability of ecological risk assessments. Ubiquitous soil algae could offer potential test species for assessing various soil pollution levels. Currently, there are few reviews offering comprehensive perspectives on stressors-based toxicological studies using microalgae in soil media, with the majority of scholarly attention paid to the toxicological effects of freshwater algae or marine algae in aquatic ecosystems. In this review, we focus on current toxicological studies of microalgae assessed in soil-related media and suggest considerations for using microalgae in soil toxicity tests based on 22 publications (1998-2021). In addition, we analyzed characteristics of soil algae based on criteria for selecting test species and suggest that future research should be directed toward the standardization of soil algal toxicity test methods. This review discusses a promising method using soil algae as new test species for soil toxicity assessment as cost-effective and environmentally sound soil quality bioindicators. The review also addresses the lack of understanding behind how soil algae can serve as important test species for soil ecotoxicity.

Typical herbicide residues, trophic transfer, bioconcentration, and health risk of marine organisms

Atrazine, a potent herbicide for weeds removal during the growing season, has been widely used in China. It is known to be distributed in aquatic ecosystems with a long half-life, thus presenting a potential risk to species and consumers. This study analyzed the concentrations of degraded atrazine residues in marine organisms (N = 129) including 3 species of mollusks, 2 species of crustaceans, and 15 species of fish from a semi-enclosed bay, Jiaozhou Bay (JZB), adjacent to the Northwest Pacific Ocean in China. The corresponding trophic magnification factors (TMF), bioaccumulation factors (BCFs), and subsequent risks to final consumers were also determined. The results showed an average atrazine concentration of (0.301 ± 0.03) ng g^-1 and (0.305 ± 0.04) ng g^-1 in fish and invertebrates, respectively. The BCFs were (5.23 ± 1.75) L kg^-1 and (5.81 ± 1.31) L kg^-1 for fish and invertebrates, respectively. Atrazine was significantly bio-diluted in JZB through the sampled marine organisms with increasing trophic levels, with a TMF value below 1 (P < 0.01). An analysis of the species sensitivity distribution (SSD) predicted that<0.02% of species were exposed to a dissolved concentration of atrazine (57.88 ng L^-1) that would lead to detrimental effects, while risk quotients predicted low long-term risks for species in the bay. Finally, people with a diet limited to species from JZB were found to face no associated health risk due to a significantly small daily intake and target hazard quotient of atrazine. The corresponding non-carcinogenic effect showed no significant risk from seafood consumption.

Assessment of cadmium pollution and subsequent ecological and health risks in Jiaozhou Bay of the Yellow Sea

Million tons of cadmium (Cd) are annually discharged into China's coastal regions, creating a persistent hazard to marine organisms and human health. This study assessed Cd residues in the Yellow Sea's semi-enclosed Jiaozhou Bay (JZB), finding concentrations of 0.05-0.94 μg/L in seawater and 0.03-0.18 mg/kg in sediment. For marine organisms, mollusks had the highest Cd concentration (0.44 ± 0.09 mg/kg), followed by crustaceans (0.26 ± 0.08 mg/kg) and fish (0.10 ± 0.02 mg/kg). Cd was clearly accumulated by mollusks, with biota-sediment accumulation factor (BSAF) values >1 and biota-water accumulation factor (BWAF) values >1000. Stable nitrogen isotope (δ¹⁵N) analysis showed that Cd underwent biomagnification in mollusks, but was significantly bio-diluted with increasing trophic level among other marine organisms. In general, Cd contamination levels were low in the JZB's seawater and sediment, and fish was estimated to be certainly polluted due to strict safety limitations on seafood in China. Current Cd residues mean that few aquatic species (<< 5%) would be affected by acute exposure, and ~ 10% of the species would be affected by chronic exposure. Based on target hazard quotients (THQ) and estimated weekly intakes (EWIs), urban residents around the JZB would experience higher health risks in comparison with rural residents due to higher seafood consumption rates, especially from mollusk consumption. Therefore, urban households in the area should increase their fish consumption rate and reduce that of mollusks.

Phenol Degradation Kinetics by Free and Immobilized Pseudomonas putida BCRC 14365 in Batch and Continuous-Flow Bioreactors

Phenol degradation by Pseudomonas putida BCRC 14365 was investigated at 30 °C and a pH of 5.0–9.0 in the batch tests. Experimental results for both free and immobilized cells demonstrated that a maximum phenol degradation rate occurred at an initial pH of 7. The peak value of phenol degradation rates by the free and immobilized cells were 2.84 and 2.64 mg/L-h, respectively. Considering the culture at 20 °C, there was a lag period of approximately 44 h prior to the start of the phenol degradation for both free and immobilized cells. At the temperatures ranging from 25 to 40 °C, the immobilized cells had a higher rate of phenol degradation compared to the free cells. Moreover, the removal efficiencies of phenol degradation at the final stage were 59.3–92% and 87.5–92%, for the free and immobilized cells, respectively. The optimal temperature was 30 °C for free and immobilized cells. In the batch experiments with various initial phenol concentrations of 68.3–563.4 mg/L, the lag phase was practically negligible, and a logarithmic growth phase of a particular duration was observed from the beginning of the culture. The specific growth rate (μ) in the exponential growth phase was 0.085–0.192 h−1 at various initial phenol concentrations between 68.3 and 563.4 mg/L. Comparing experimental data with the Haldane kinetics, the biokinetic parameters, namely, maximum specific growth rate (μmax), the phenol half-saturation constant (Ks) and the phenol inhibition constant (KI), were determined to equal 0.31 h−1, 26.2 mg/L and 255.0 mg/L, respectively. The growth yield and decay coefficient of P. putida cells were 0.592 ± 4.995 × 10−3 mg cell/mg phenol and 5.70 × 10−2 ± 1.122 × 10−3 day−1, respectively. A completely mixed and continuous-flow bioreactor with immobilized cells was set up to conduct the verification of the kinetic model system. The removal efficiency for phenol in the continuous-flow bioreactor was approximately 97.7% at a steady-state condition. The experimental and simulated methodology used in this work can be applied, in the design of an immobilized cell process, by various industries for phenol-containing wastewater treatment.