Hydrothermal synthesis of m-BiVO4/t-BiVO4 heterostructure for organic pollutants degradation: Insight into the photocatalytic mechanism of exposed facets from crystalline phase controlling

Semi-Coherent Heterointerface Engineering via In Situ Phase Transition for Enhanced Sodium/Lithium-Ions Storage

To improve ion transport kinetics and electronic conductivity between the different phases in sodium/lithium-ion battery (LIB/SIB) anodes, heterointerface engineering is considered as a promising strategy due to the strong built-in electric field. However, the lattice mismatch and defects in the interphase structure can lead to large grain boundary resistance, reducing the ion transport kinetics and electronic conductivity. Herein, monometallic selenide Fe3 Se4 -Fe7 Se8 semi-coherent heterointerface embedded in 3D connected Nitrogen-doped carbon yolk-shell matrix (Fe3 Se4 -Fe7 Se8 @NC) is obtained via an in situ phase transition process. Such semi-coherent heterointerface between Fe3 Se4 and Fe7 Se8 shows the matched interfacial lattice and strong built-in electric field, resulting in the low interface impedance and fast reaction kinetics. Moreover, the yolk-shell structure is designed to confine all monometallic selenide Fe3 Se4 -Fe7 Se8 semi-coherent heterointerface nanoparticles, improving the structural stability and inhibiting the volume expansion effect. In particular, the 3D carbon bridge between multi-yolks shell structure improves the electronic conductivity and shortens the ion transport path. Therefore, the efficient reversible pseudocapacitance and electrochemical conversion reaction are enabled by the Fe3 Se4 -Fe7 Se8 @NC, leading to the high specific capacity of 439 mAh g-1 for SIB and 1010 mAh g-1 for LIB. This work provides a new strategy for constructing heterointerface of the anode for secondary batteries.

A Meta-Analysis of Influencing Factors on the Activity of BiVO4-Based Photocatalysts

With the continuous advancement of global industrialization, a large amount of organic and inorganic pollutants have been discharged into the environment, which is essential for human survival. Consequently, the issue of water environment pollution has become increasingly severe. Photocatalytic technology is widely used to degrade water pollutants due to its strong oxidizing performance and non-polluting characteristics, and BiVO4-based photocatalysts are one of the ideal raw materials for photocatalytic reactions. However, a comprehensive global analysis of the factors influencing the photocatalytic performance of BiVO4-based photocatalysts is currently lacking. Here, we performed a meta-analysis to investigate the differences in specific surface area, kinetic constants, and the pollutant degradation performance of BiVO4-based photocatalysts under different preparation and degradation conditions. It was found that under the loading condition, all the performances of the photocatalysts can be attributed to the single BiVO4 photocatalyst. Moreover, loading could lead to an increase in the specific surface area of the material, thereby providing more adsorption sites for photocatalysis and ultimately enhancing the photocatalytic performance. Overall, the construct heterojunction and loaded nanomaterials exhibit a superior performance for BiVO4-based photocatalysts with 136.4% and 90.1% improvement, respectively. Additionally, within a certain range, the photocatalytic performance increases with the reaction time and temperature.

2D defect-engineered Ag-doped γ-Fe2O3/BiVO4: The effect of noble metal doping and oxygen vacancies on exciton-triggering photocatalysis production of singlet oxygen

The selectivity of singlet oxygen (1O2) holds promising applications in complex environmental systems due to its ability to preferentially oxidize target pollutants. Usually, 1O2 in photocatalytic systems is generated via the electron transfer pathway and •O2- plays an important role as an intermediate, while the exciton-based energy transfer pathway for 1O2 generation has been less studied. Here, a 2D Ag-γ-Fe2O3/BiVO4 with oxygen vacancies was designed which was capable of generating 1O2 by an exciton-based energy transfer-dominated approach, as strongly demonstrated by the results of steady-state fluorescence spectroscopy and phosphorescence spectroscopy. In the Z-type heterojunction photocatalyst system, Ag acted as an electron mediator to promote not only the generation of free carriers but also the generation of singlet excitons, while the appropriate concentration of oxygen vacancies further promotes the exciton-triggering photocatalysis production of 1O2. The Ag-γ-Fe2O3/BiVO4 could degrade 99.4% of sulfadiazine within 90 min, and 1O2 played an important role in the degradation of sulfadiazine, as shown by EPR and active species capture experiments. Ecotoxicity predictions indicated that the main byproducts of sulfadiazine degradation by Ag-γ-Fe2O3/BiVO4 were low in toxicity. The prepared photocatalysts provide a new idea for obtaining 1O2 and designing photocatalysts with selectivity.

Novel Z-scheme AgI/Sb2WO6 heterostructure for efficient photocatalytic degradation of organic pollutants under visible light: Interfacial electron transfer pathway, DFT calculation and mechanism unveiling

Developing highly efficient heterostructured photocatalysts with robust redox ability is of great significance to wastewater purification. Herein, a novel Z-scheme AgI/Sb2WO6 heterojunction was successfully constructed via a chemical-precipitation method. The Z-scheme system can serve as a highly efficient photocatalyst for degradation of organic pollutants in water. Under visible light illumination, the degradation efficiency of rhodamine B and tetracycline over the optimal Z-scheme heterojunction can achieve 95% in 12 min and 80% in 8 min, which is 10.8 and 11.4 times higher than that over single Sb2WO6, respectively. Interestingly, low amounts of Ag0 can be generated and attached on the surface of Sb2WO6 during the photocatalytic process, further enhancing the photocatalytic activity of the Z-scheme heterojunction. Based on theoretical calculations, the interfacial internal electric field (IEF) can facilitate the photoexcited electrons at the conduction band (CB) of AgI to consume the photoexcited holes at the valence band (VB) of Sb2WO6, which greatly promotes the Z-scheme charge transfer path. Quenching experiments and electron spin resonance analyses demonstrate superoxide radicals play a major role in the photocatalytic reactions. The concept of constructing a Z-scheme heterojunction photocatalyst with efficient interfacial charge transfer shall provide a design guide for wastewater purification.

Bismuth Vanadate (BiVO4) Nanostructures: Eco-Friendly Synthesis and Their Photocatalytic Applications

Green nanotechnology plays an important role in designing environmentally-benign and sustainable synthesis techniques to provide safer products for human health and environments. In this context, the synthesis of bismuth vanadate (BiVO4) nanoparticles (NPs) based on green chemistry principles with the advantages of eco-friendliness, cost-effectiveness, and simplicity has been explored by researchers. Despite the advantages of these synthesis techniques, crucial aspects regarding their repeatability and large-scale production still need to be comprehensively explored. BiVO4 NPs have shown excellent potential in the pharmaceutical industry, cancer therapy, and photocatalysis. BiVO4 particles with monoclinic scheelite structures have been widely investigated for their environmental applications owing to their fascinating optical and electrical properties as well as their high stability and unique crystal structure properties. These NPs with good photostability and resistance to photocorrosion can be considered as promising nanophotocatalysts for degradation of pollutants including organic dyes and pharmaceutical wastes. However, additional explorations should be moved toward the optimization of reaction/synthesis conditions and associated photocatalytic mechanisms. Herein, recent developments regarding the environmentally-benign fabrication of BiVO4 NPs and their photocatalytic degradation of pollutants are deliberated, with a focus on challenges and future directions.

Comprehension of the Synergistic Effect between m&t-BiVO4/TiO2-NTAs Nano-Heterostructures and Oxygen Vacancy for Elevated Charge Transfer and Enhanced Photoelectrochemical Performances

Through the utilization of a facile procedure combined with anodization and hydrothermal synthesis, highly ordered alignment TiO2 nanotube arrays (TiO2-NTAs) were decorated with BiVO4 with distinctive crystallization phases of monoclinic scheelite (m-BiVO4) and tetragonal zircon (t-BiVO4), favorably constructing different molar ratios and concentrations of oxygen vacancies (Vo) for m&t-BiVO4/TiO2-NTAs heterostructured nanohybrids. Simultaneously, the m&t-BiVO4/TiO2-NTAs nanocomposites significantly promoted photoelectrochemical (PEC) activity, tested under UV-visible light irradiation, through photocurrent density testing and electrochemical impedance spectra, which were derived from the positive synergistic effect between nanohetero-interfaces and Vo defects induced energetic charge transfer (CT). In addition, a proposed self-consistent interfacial CT mechanism and a convincing quantitative dynamic process (i.e., rate constant of CT) for m&t-BiVO4/TiO2-NTAs nanoheterojunctions are supported by time-resolved photoluminescence and nanosecond time-resolved transient photoluminescence spectra, respectively. Based on the scheme, the m&t-BiVO4/TiO2-NTAs-10 nanohybrids exhibited a photodegradation rate of 97% toward degradation of methyl orange irradiated by UV-visible light, 1.14- and 1.04-fold that of m&t-BiVO4/TiO2-NTAs-5 and m&t-BiVO4/TiO2-NTAs-20, respectively. Furthermore, the m&t-BiVO4/TiO2-NTAs-10 nanohybrids showed excellent PEC biosensing performance with a detection limit of 2.6 μM and a sensitivity of 960 mA cm-2 M-1 for the detection of glutathione. Additionally, the gas-sensing performance of m&t-BiVO4/TiO2-NTAs-10 is distinctly superior to that of m&t-BiVO4/TiO2-NTAs-5 and m&t-BiVO4/TiO2-NTAs-20 in terms of sensitivity and response speed.

Er3+/Sm3+ co-doped Bi2O2CO3 in photocatalytic water treatment: Immobilization, acute toxicity, sterilization, and catalytic oxidation activity

Defect construction and rare earth doping are the linchpins to completing the target of partial electronic regulation. In Er³⁺/Sm³⁺ co-doping Bi₂O₂CO₃, rare earth doping resulted in the exposure of {001} crystal plane in Bi₂O₂CO₃ and cause surface defects and electron traps, achieving wide light response capability and fast carrier separation. Furthermore, a potential TC degradation route was acknowledged derived from LC-MS. Then, the median lethal concentration LC50 (96 h) is 80 ppm, probing the 2E2SBOC photocatalyst has low toxicity in actual wastewater. Combining with immobilization technology, not only does it have little impact on the organisms in the wastewater, but it is easy to recycle after degradation. In terms of new water disinfection technology, bacterial experiments in natural waters proved that 2E2SBOC has a potential disinfection system, which promotes the exposure of more active sites during degradation. This effective project offers a novel perspective for the development and application of rare-earth-doped photocatalysts.

Plasmonic Bi promotes the construction of Z-scheme heterojunction for efficient oxygen molecule activation

Reactive oxygen species (ROS) are essential to photocatalytic degradation of antibiotics in water. In this work, we prepared Ag₃PO₄/Bi@Bi₄Ti₃O₁₂ by simple in-situ reduction method and precipitation method, which improves the ability to capture visible light and increases the activity of photoinduced molecular oxygen activation, resulting in reactive oxygen species (ROS) such as superoxide radicals (•O₂^-), hydroxyl radicals (•OH), and H₂O₂. The excellent TC degradation efficiency derive from the SPR effect of the metal Bi on the surface enhances the light absorption intensity, and development of a Z-scheme heterojunction between Ag₃PO₄ and Bi₄Ti₃O₁₂ promotes the activation of molecular oxygen. A possible photodegradation mechanism of the as-prepared photocatalyst was proposed. This work provides an insight perspective to the synthesis photocatalysts with molecular oxygen activation for environmental remediation.

Emerging bismuth-based direct Z-scheme photocatalyst for the degradation of organic dye and antibiotic residues

Organic dye and antibiotic residues are some of the key substances that can contaminate the environment due to their wide usage in various industries and modern medicine. The degradation of these substances present in waterbodies is essential while contemplating human health. Photocatalysts (PSs) are promising materials that develop highly reactive species instantly by simple solar energy conversion for degrading the organic dye and antibiotic residues and converting them into nontoxic products. Among numerous semiconductors, the bismuth (Bi)-containing PS has received great attention due to its strong sunlight absorption, facile preparation, and high photostability. Owing to the technology advancement and demerits of the traditional methods, a Bi-containing direct Z-scheme PS has been developed for efficient photogenerated charge carrier separation and strong redox proficiency. In this review, a synthetic Bi-based Z-scheme heterojunction that mimics natural photosynthesis is described, and its design, fabrication methods, and applications are comprehensively reviewed. Specifically, the first section briefly explains the role of various semiconductors in the environmental applications and the importance of the Bi-based materials for constructing the Z-scheme photocatalytic systems. In the successive section, overview of Z-scheme PS are concisely discussed. The fourth and fifth sections extensively explain the degradation of the organic dyes and antibiotics utilizing the Bi-based direct Z-scheme heterojunction. Eventually, the conclusions and future perspectives of this emerging research field are addressed. Overall, this review is potentially useful for the researchers involved in the environmental remediation field as a collection of up-to-date research articles for the fabrication of the Bi-containing direct Z-scheme PS.

Sonophotocatalytic Dye Degradation Using rGO-BiVO4 Composites

Reduced graphene oxide (rGO)/bismuth vanadate BiVO₄ composites are fabricated with varied rGO amounts (0, 1, 2, and 3 wt%) through the synergetic effects of ultrasonication, photoinduced reduction, and hydrothermal methods, and the materials are tested as tools for sonophotocatalytic methylene blue (MB) dye degradation. The effect of rGO content on the sonophotocatalytic dye degradation capabilities of the composites are explored. Characterization of the proposed materials is done through transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transformation infrared spectroscopy as well as scanning electron microscopy. The coexistence of BiVO₄ and rGO is confirmed using Raman spectroscopy and XRD. TEM confirms the existence of interfaces between rGO and BiVO₄ and XPS affirms the existence of varied elemental oxidation states. In order to investigate the charge carriers transportation, time-dependent photocurrent responses of BiVO₄ and 2 wt%- rGO/BiVO₄ are done under visible light irradiation. The sonophotocatalytic MB dye degradation in an aqueous medium displays promising enhancement with rGO doping in rGO/BiVO₄ composite. The 2 wt%- rGO/BiVO₄ sample exhibits ≈52% MB dye degradation efficiency as compared to pure BiVO4 (≈25%) in 180 min of the sonophotocatalysis experiment. Phytotoxicity analysis through germination index is done using vigna radiata seeds.

Visible-light-driven Z-scheme protonated g-C3N4/wood flour biochar/BiVO4 photocatalyst with biochar as charge-transfer channel for enhanced RhB degradation and Cr(VI) reduction

For the simultaneous photocatalytic reduction of hexavalent chromium (Cr(VI)) and the degradation of rhodamine B (RhB), directional charge-transfer channels and efficient separation of photogenerated holes and electrons are important. Herein, a Z-scheme heterojunction photocatalyst, protonated g-C₃N₄/BiVO₄ decorated with wood flour biochar (pCN/WFB/BiVO₄), was prepared through a hydrothermal reaction and electrostatic self-assembly for Cr(VI) photoreduction and RhB photodegradation. The morphological features, crystalline structure, chemical composition, optical properties, specific surface area, and photoelectrochemical properties of the prepared samples were investigated. The pCN/WFB/BiVO₄ photocatalyst exhibited superior removal performance when used to remove Cr(VI) and RhB separately or RhB-Cr(VI) system. The biochar bridge served as a charge-transfer channel between two semiconductors, and the electrons in protonated g-C₃N₄ (pCN) and BiVO₄ achieved a charge balance. This led to the formation of a Z-scheme heterojunction, fast photogenerated charge separation, and a powerful redox ability. The pCN/WFB/BiVO₄ photocatalyst provides new insight into the mechanisms responsible for boosting multicomponent photocatalytic reactions, while constituting a promising candidate for wastewater treatment.

Improved photoredox activity of the 2D Bi4Ti3O12–BiVO4–Bi4V2O10 heterostructure via the piezoelectricity-enhanced charge transfer effect

The formation of the 2D Bi4Ti3O12–BiVO4–Bi4V2O10 heterostructure and the piezoelectric effect on photoredox activity improvements.

Controlled Synthesis and Structural Modulation to Boost Intrinsic Photocatalytic Activity of BiVO4

Modulation of the structure, composition, and morphology through a simple refinement of the synthetic parameters are central to obtaining signature catalytic properties, enabling an understanding of the underlying growth and...

Direct complexation of citric acid to synthesize high-efficiency bismuth vanadate through molten polymerization route for the degradation of tetracycline hydrochloride under visible light irradiation

Tetracycline hydrochloride can be efficiently degraded over BiVO4 prepared through direct citric acid complexation.

Vacancy defect engineering of BiVO4 photoanodes for photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting has been regarded as a promising technology for sustainable hydrogen production. The development of efficient photoelectrode materials is the key to improve the solar-to-hydrogen (STH) conversion efficiency towards practical application. Bismuth vanadate (BiVO₄) is one of the most promising photoanode materials with the advantages of visible light absorption, good chemical stability, nontoxic feature, and low cost. However, the PEC performance of BiVO₄ photoanodes is limited by the relatively short hole diffusion length and poor electron transport properties. The recent rapid development of vacancy defect engineering has significantly improved the PEC performance of BiVO₄. In this review article, the fundamental properties of BiVO₄ are presented, followed by an overview of the methods for creating different kinds of vacancy defects in BiVO₄ photoanodes. Then, the roles of vacancy defects in tuning the electronic structure, promoting charge separation, and increasing surface photoreaction kinetics of BiVO₄ photoanodes are critically discussed. Finally, the major challenges and some encouraging perspectives for future research on vacancy defect engineering of BiVO₄ photoanodes are presented, providing guidelines for the design of efficient BiVO₄ photoanodes for solar fuel production.

F- regulate the preparation of polyhedral BiVO4 enclosed by High-Index facet and enhance its photocatalytic activity

The selective exposure of high-index facets at the surface of nanocrystals is an important and challenging research topic. Herein, polyhedral bismuth vanadate (BiVO₄) crystals predominantly surrounded by {2 1 3} and {1 2 1} high-index facets were fabricated through the engineering of high-index surfaces by fluorinion (F^-) mediated hydrothermal process. The as-prepared BiVO₄-0.2F (the feeding amount of NaF was 0.2 g) catalyst exhibited high apparent quantum efficiency of 17.7% under 420 nm light irradiation and 9.3 fold enhancement of O₂ evolution relative to its low-index counterparts. Moreover, the growth of high-index facets results in significant enhancement of hydroxyl radical (•OH) production, photocatalytic degradation of Rhodamine B (RhB) and photoelectrochemical (PEC) properties by the BiVO₄ polyhedron, relative to its low-index counterparts. The enhanced photoreactivity is the result of the synergistic effect of F^- on the surface of the BiVO₄ crystals and exposed high-index facets. For one thing, F^- on the surface of the BiVO₄ facilitate the separation and transport of photo-induced charge carriers. For another, the exposed high-index facets on polyhedral BiVO₄ provided much more reactive sites for photocatalytic reactions. Hopefully, this F^- mediated method will be a useful guideline for designing and synthesizing novel high-index faceted micro-/nanostructures for overcoming the practical energy and environment problems.

Plasma Cu-decorated TiO2-x/CoP particle-level hierarchical heterojunctions with enhanced photocatalytic-photothermal performance

Plasma Cu-decorated TiO_2-x/CoP particle-level hierarchical heterojunction photocatalysts with surface engineering were fabricated through solvothermal and solid phase reduction strategies. The CoP nanoparticles not only serve as a cost-effective cocatalyst but also provide abundant surface active sites, which facilitate rapid transfer of photogenerated carriers. The Ti³⁺ and oxygen vacancy defects extend photoresponse from UV to visible light region, and enhance the separation efficiency of photogenerated carriers efficiently. Because of surface plasma resonance (SPR) of Cu, Cu/TiO_2-x/CoP with average particle size of 100-200 nm has significant photothermal effect, in which the temperature of Cu/TiO_2-x/CoP is increased by 76 °C with irradiation for 30 s, ~ 8 times higher than that of the original TiO₂. Cu/TiO_2-x/CoP exhibits a high photocatalytic degradation rates for highly toxic 2,4-dichlorophenol (99.2%) and 2,4,6-trichlorophenol (98.5%), which higher 7.6 and 8.9 times than the initial TiO₂, respectively. Thanks to the particle-level hierarchical heterojunction, the efficient surface engineering and SPR effect favoring the spatial charge separation, Cu/TiO_2-x/CoP shows excellent photocatalytic-photothermal Performance. This particle-level hierarchical heterojunction architectural design provides a new insight for synthesizing particulate photocatalysts with high-efficiency.

BiVO4 prepared by the sol-gel doped on graphite felt cathode for ciprofloxacin degradation and mechanism in solar-photo-electro-Fenton

In this research, bismuth vanadate-doped graphite felt (GF-BiVO₄) was successfully prepared by sol-gel method, in which BiVO₄ owned superior electro-Fenton (EF) and solar-photo-electro-Fenton (SPEF) performance. Combined with the analysis by X-ray diffractometer (XRD), field emission transmission electron microscopy (FE-TEM), nitrogen adsorption-desorption isotherms and cyclic voltammetry (CV), the changes of electrodes were reflected in structure and physicochemical properties. The doping of monoclinic BiVO₄ endued GF with a higher surface area and more electro-active sites and better electrode activity in comparison to Raw-GF. Then, the GFs were used as cathodes to detect •OH concentration with coumarin (COU) as probe molecule and to evaluate photoelectric performance with ciprofloxacin (CIP) in photocatalysis, EF and SPEF processes. The results demonstrated that the concentration of •OH followed an order of SPEF> EF> photocatalysis, which was consistent with the removal rate of CIP (99.8%, 99.4% and 21.2%, respectively) on GF-BiVO₄ at 5 min. Further, five degradation pathways of CIP in SPEF system were proposed including the attack on piperazine ring, oxidation on cyclopropyl group, decarboxylation and hydroxyl radical addition, oxidation on benzene group and defluorination. The study provides insights into the enhancement of EF and SPEF performance and the degradation pathway of CIP in SPEF.

Unique MIL-53(Fe)/PDI Supermolecule Composites: Z-Scheme Heterojunction and Covalent Bonds for Uprating Photocatalytic Performance

It is important to find an effective way to enhance the photocatalytic efficiency of metal-organic frameworks. In this work, an organic supermolecule perylene diimide (PDI) semiconductor with a carboxyl terminal was added into the synthesis process of MIL-53(Fe) crystals. The PDI/MIL-53(Fe) (PM) composite photocatalyst was first obtained. The TC-H photodegradation rate of the most efficient 5PM was nearly 94.08% within 30 min, whose apparent reaction rate constant (k) is 4 times that of PDI and 33 times that of MIL-53(Fe), respectively. By investigation and characterization, it has been found that PDI nanofibers were dispersed and fixed in MIL-53(Fe) and bonded to each other by covalent bonds. The radical trap experiments and electron spin resonance analysis illustrated that hydroxyl radical (·OH), superoxide radical (·O₂^-), and photogenerated holes (h⁺) were active species. Combined with the band structure of PDI and MIL-53(Fe), it is proposed that the PM photocatalyst was a Z-scheme heterojunction mechanism. Therefore, PM photocatalysts showed excellent charge separation and transfer ability. The performance improvement of 5PM is due to enhanced visible light absorption, efficient charge separation, and excellent redox potential. Five cyclic photocatalytic tests and experiments further demonstrate that the 5PM photocatalyst has a promising future for pollutant removal.

Photocatalytic Activity of S-Scheme Heterostructure for Hydrogen Production and Organic Pollutant Removal: A Mini-Review

Finding new technologies and materials that provide real alternatives to the environmental and energy-related issues represents a key point on the future sustainability of the industrial activities and society development. The water contamination represents an important problem considering that the quantity and complexity of organic pollutant (such as dyes, pesticides, pharmaceutical active compounds, etc.) molecules can not be efficiently addressed by the traditional wastewater treatments. The use of fossil fuels presents two major disadvantages: (1) environmental pollution and (2) limited stock, which inevitably causes the energy shortage in various countries. A possible answer to the above issues is represented by the photocatalytic technology based on S-scheme heterostructures characterized by the use of light energy in order to degrade organic pollutants or to split the water molecule into its components. The present mini-review aims to outline the most recent achievements in the production and optimization of S-scheme heterostructures for photocatalytic applications. The paper focuses on the influence of heterostructure components and photocatalytic parameters (photocatalyst dosage, light spectra and intensity, irradiation time) on the pollutant removal efficiency and hydrogen evolution rate. Additionally, based on the systematic evaluation of the reported results, several perspectives regarding the future of S-scheme heterostructures were included.

Crystallinity and photocatalytic properties of BiVO4/halloysite nanotubes hybrid catalysts for sunlight-driven decomposition of dyes from aqueous solution

The BiVO₄/HNTs hybrid photocatalysts were synthesized by liquid phase precipitation using natural halloysite nanotubes (HNTs) as supporter and Bi(NO₃)·5H₂O as resource of Bi. XRD, scanning electron microscopy (SEM), transmission electron microscopy, HRTEM, x-ray photo electron spectroscopy and UV-Vis DRS were used to characterize the samples prepared at different calcination temperatures, and the effects of crystallization, Brunauer-Emmett-Teller specific surface area and morphological structure on the photoactivity were investigated. Results reveal that increasing calcination temperature can accelerate the transition of BiVO₄ from tetragonal to monoclinic and also decrease the surface area of BiVO₄/HNTs. The SEM results showed that BiVO₄ was successfully coated on HNTs surface with ellipsoid or near rod like morphology, and the obtained BiVO₄/HNTs had regular nanotube morphology. HRTEM results showed that, the regular fringe spacing of the lattice planes are about 0.474 and 0.364 nm, which is consistent with the (110) and (200) plane of the monoclinic and tetragonal BiVO₄, confirming the exiting of mixed crystal structure in BiVO₄/HNTs. BiVO₄ with tetragonal phase (80.02%) and monoclinic phase (19.98%) mixed crystal is loaded on the surface of HNTs with calcinations at 400 °C for 2 h. The structure and Si (Al)-O bond of HNTs can be obviously changed over the calcination temperature of 400 °C. The effect of calcination temperature on photocatalytic reactivity of samples was investigated by degradation of dyes (MB, MO and RhB) under simulated solar light. And the sample calcined at 400 °C with the better mixed crystalline structure and larger specific surface area exhibits significant activity with the removal rate of MB and RhB up to 100% within 4 h. The degradation of MB follows the first order kinetic model. BiVO₄/HNTs photocatalysts with the band gap of 2.34 eV has higher photocatalytic reaction rate and better sedimentation performance than Degussa P25. The photocatalytic degradation efficiency of BiVO₄/HNTs for MB was no significant reduction after four times recycles.

A π-π stacking perylene imide/Bi2WO6 hybrid with dual transfer approach for enhanced photocatalytic degradation

A new broad-spectrum responsive organic-inorganic hybrid photocatalyst (PI@BWO) was successfully prepared by in-situ growing Bi₂WO₆ nanosheets onto the surface of π-π stacking perylene imide. The obtained PI@BWO hybrids with different composition exhibited enhanced photocatalytic activity for Bisphenol A (BPA) degradation. Among them, 30% PI@BWO exhibited optimal photocatalytic degradation efficiency, which is 2.6 and 3.9 times higher than that of pristine PI and BWO, respectively. Furthermore, PI@BWO also performed good stability and recyclability. Remarkably, the π-conjugation of PI facilitated the separation of charge carriers and improved the utilization of sunlight for PI@BWO. The introduction of BWO nanosheets also enhanced the adsorption capacity for contaminants and provided much more plentiful active sites, promoting the next photocatalytic reaction. Most importantly, PI@BWO could produce abundant reactive species (such as ¹O₂ and ·OH) via the charge carrier transfer and energy transfer dual transfer approach, therefore leading to stronger oxidation ability. The photocatalytic degradation mechanism and pathway of the PI@BWO hybrids were finally proposed. Overall, this present work might provide a new insight into the designing and preparation of efficient organic-inorganic hybrid photocatalysts for environmental-friendly removal of hazardous organic pollutants.

Benefits on photocarrier transfer from the transition of 3D to a 2D morphology

In the transition from three-dimensional to a two-dimensional morphology, the area of the (010) facet (electron surface) increases, and the conduction band bottom becomes more negative.