Performance indicators for a holistic evaluation of catalyst-based degradation-A case study of selected pharmaceuticals and personal care products (PPCPs)

Ultrasonic treatment of endocrine disrupting compounds, pharmaceuticals, and personal care products in water: An updated review

Pharmaceuticals, personal care products (PPCPs), and endocrine-disrupting compounds (EDCs) have seen a recent sustained increase in usage, leading to increasing discharge and accumulation in wastewater. Conventional water treatment and disinfection processes are somewhat limited in effectively addressing this micropollutant issue. Ultrasonication (US), which serves as an advanced oxidation process, is based on the principle of ultrasound irradiation, exposing water to high-frequency waves, inducing thermal decomposition of H2O while using the produced radicals to oxidize and break down dissolved contaminants. This review evaluates research over the past five years on US-based technologies for the effective degradation of EDCs and PPCPs in water and assesses various factors that can influence the removal rate: solution pH, temperature of water, presence of background common ions, natural organic matter, species that serve as promoters and scavengers, and variations in US conditions (e.g., frequency, power density, and reaction type). This review also discusses various types of carbon/non-carbon catalysts, O3 and ultraviolet processes that can further enhance the degradation efficiency of EDCs and PPCPs in combination with US processes. Furthermore, numerous types of EDCs and PPCPs and recent research trends for these organic contaminants are considered.

Comparative study of electro-Fenton and photoelectro-Fenton processes using a novel photocatalytic fuel cell electro-Fenton system with g-C3 N4 @N-TiO2 and Ag/CNT@CF as electrodes

In this study, a novel photocatalytic fuel cell electro-Fenton (PFC-EF) system was constructed using g-C3 N4 @N-TNA and Ag/CNT@CF as electrodes. The composition, structure, and morphology of the electrodes were obtained. The g-C3 N4 @N-TNA, with its 2.37 eV band gap and 100 mV photovoltage, has excellent excitation properties for sunlight. Ag/CNT@CF with abundant pores, CNT 3D nanostructures, and Ag crystals on the surface can improve the electro-Fenton efficiency. A comparative study of rhodamine B (RhB) degradation was performed in this system. It has been shown that electric fields can greatly enhance the oxidation efficiency of both anode photocatalysis and the cathode electro-Fenton process. Under optimal conditions, RhB can be completely removed by the photoelectro-Fenton (PEF) process. The energy consumption of the PEF system was obtained. The electrical energy per order (EE/O) is only 9.2 kWh/m3 ·order, which is only 16.5% of EF and 2.2% of PFC-EF system. The mineralization current efficiency (MCE) of the PEF system reached 93.3% for a 2-h reaction. Therefore, the PEF system has the advantage of saving energy. The kinetic analysis shows that the RhB removal follows a first-order kinetic law, and the reaction rate constant reaches 0.1304 min-1 , which is approximately 5.2 times larger and 4.0 times larger than the electro-Fenton and PFC-EF processes, respectively. RhB removal is a coupling multimechanism in which an electric field enhances photoelectron migration, Ag loading improves H2 O2 generation, UV light coupled with H2 O2 promotes hydroxyl radical (٠OH) generation, and the nanoconfinement effect of CNTs promotes ٠OH accumulation in favor of RhB degradation. PRACTITIONER POINTS: Novel efficiency photocatalytic fuel cell electro-Fenton system was constructed. The electric field greatly enhances the photocatalytic fuel cell electro-Fenton system. Multiple coupling mechanisms of UV/H2O2, UV/Fenton and photo-electro-Fenton have been revealed.

Unveiling the roles of dissolved organic matters derived from different biochar in biochar/persulfate system: Mechanism and toxicity

Biochar has been frequently used as a persulfate (PS) activator due to its attractive properties, but dissolved organic matter (DOM) derived from the non‑carbonized part of biochar has received less attention, not to mention its specific role and impact in biochar/PS systems. In this study, wheat straw, municipal sludge, and swine bone were selected as the representative feed stocks of biochar. Subsequently, these three types of biochar were adopted to explore the roles of DOM in biochar/PS systems. Although the composition and amount of DOM derived from different biochar were discrepant, they exhibited similar effect in biochar/PS systems. To be specific, the pore-clogging effect of DOM on biochar suppressed the adsorption capacity and catalytic performance of the three biochar. Furthermore, the removal of DOM decreased the environmental risk of these biochar/PS systems and enhanced the stability of the involved biochar. With respect to the variation in degradation mechanism, the removal of DOM increased the proportion of electron transfer pathway in unison, but the diminution in the roles of O₂^•¯ and ¹O₂ was more remarkable in bone-derived-biochar/PS systems. Additionally, the toxicity test illustrated that the leakage and accumulation of DOM were toxic to Chlorella sp., and the DOM from sludge-derived-biochar presented the highest toxicity. Overall, this study analyzes the roles of DOM derived from different biochar in biochar/PS systems and evaluates their environmental risk, which contributes to a comprehensive understanding of the fate of DOM derived from biochar.

Highly Efficient Copper Doping LaFeO3 Perovskite for Bisphenol A Removal by Activating Peroxymonosulfate

A series of copper doping LaFeO3 perovskite (LaCuxFe1−xO3, LCFO, x = 0.1, 0.4, 0.5, 0.6, 0.9) are successfully synthesized by the sol-gel method under mild conditions. In this study, it is applied for the activation of peroxymonosulfate (PMS) for bisphenol A (BPA) removal. More than 92.6% of BPA was degraded within 30 min at 0.7 g/L of LCFO and 10.0 mM of PMS over a wide pH range with limited leaching of copper and iron ions. The physical–chemical properties of the catalysts were demonstrated by using X-ray diffraction (XRD), N2 adsorption–desorption isotherms, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Furthermore, the effects of catalyst dosage, PMS concentration, initial pH value, and inorganic anions on the LCFO/PMS system were fully investigated. Quenching experiments were performed to verify the formation of reactive oxidant species, which showed that the radical reaction and mechanisms play a great role in the catalytic degradation of BPA. The perovskite LCFO is considered a stable, easy to synthesize, and efficient catalyst for the activation of PMS for wastewater treatment.

A novel role of various hydrogen bonds in adsorption, desorption and co-adsorption of PPCPs on corn straw-derived biochars

The effect of various hydrogen bonds with different strength on the environmental behaviors of PPCPs remains unclear. In this study, three pharmaceutical pollutants including clofibric acid (CA), sulfamerazine (SMZ), and acetaminophen (ACT) with different functional groups and pK_a, were selected as representative of PPCPs to investigate the pivotal role of hydrogen bonds in adsorption/desorption and co-adsorption behaviors of PPCPs on two corn straw-derived biochars prepared at 300 °C (BCs-300) and 600 °C (BCs-600), respectively. The results indicated that charge-assisted hydrogen bond (CAHB) and ordinary hydrogen bond (OHB) with different intensities were the pivotal mechanisms responsible for the adsorption of three PPCPs on biochars, which was further confirmed by FTIR, but their immobilization effects of PPCPs on biochars were completely different. Compared with OHB formed between CA and BCs-600, the stronger CAHB (formed between CA and BCs-300, and SMZ/ACT and BCs-300/BCs-600) with covalent bond characteristics that derived from the smaller |ΔpK_a| (<5.0), resulted in the greater adsorption capacity (Q_s) and affinity (K_f) of the three PPCPs on BCs-300 (Q_s ≥ 195 μmol·g^-1, K_f ≥ 1.9956) than that on BCs-600 (Q_s ≤ 92 μmol·g^-1, K_f ≤ 0.5192), thereby making the better immobilization effect of PPCPs by biochar. In addition, in the coexisting systems, either SMZ coexisting with CA/ACT on BCs-300, or ACT coexisting with CA/SMZ on BCs-600, both implied that when the |ΔpK_a| between the target PPCPs and biochar is smaller than that between the coexisting compound and biochar, the target PPCPs can preferentially occupy the shared hydrogen bond sites on the biochar surface, and hard to be replaced by the coexisting compound. This work not only expand the application of designed biochar as engineering adsorbents to control and removal of the specific PPCPs in the environment, but also facilitate accurate assessment of the environmental risk of co-existing PPCPs.

Combining environmental, health, and safety features with a conductor like Screening Model for selecting green solvents for antibiotic analyses

Extraction and chromatographic techniques for analyzing pharmaceutically active compounds necessitate large quantities of organic solvents, resulting in a high volume of hazardous waste. The concept of green solvents focuses on protecting the environment by reducing or even eliminating the use of toxic solvents. The main objective of this critical review article is to build a framework for choosing green solvents for antibiotic analyses. The article briefly discusses the chemical properties of ciprofloxacin, sulfamethoxazole, tetracycline, and trimethoprim, and the current state of methodologies for their analyses in water and wastewater. It evaluates the greenness of solvents used for antibiotic analyses and includes insights on the comparison between conventional and green solvents for the analyses. An economic and environmental health and safety analysis combined with a Conductor-like Screening Model for Real Solvent (COSMO-RS) molecular simulation technique for predicting extraction efficiency was used in the evaluation. Methyl acetate and propylene carbonate tied for the greenest solvents from an environmental and economic perspective, whereas the COSMO-RS approach suggests dimethyl sulfoxide (DMSO) as the most suitable candidate. Although DMSO ranked third environmentally and economically, after methyl acetate and propylene carbonate, it would be an ideal replacement of hazardous solvents if it could be manufactured at a lower cost. DMSO showed the highest extraction capacity, as it can interact with antibiotics through hydrophobic interaction and hydrogen bonding. This article can be used as a green solvent selection guide for developing sustainable processes for antibiotic analyses.

Biochar-mediated removal of pharmaceutical compounds from aqueous matrices via adsorption

Pharmaceutical is one of the noteworthy classes of emerging contaminants. These biologically active compounds pose a range of deleterious impacts on human health and the environment. This is attributed to their refractory behavior, poor biodegradability, and pseudopersistent nature. Their large-scale production by pharmaceutical industries and subsequent widespread utilization in hospitals, community health centers, and veterinary facilities, among others, have significantly increased the occurrence of pharmaceutical residues in various environmental compartments. Several technologies are currently being evaluated to eliminate pharmaceutical compounds (PCs) from aqueous environments. Among them, adsorption appears as the most viable treatment option because of its operational simplicity and low cost. Intensive research and development efforts are, therefore, currently underway to develop inexpensive adsorbents for the effective abatement of PCs. Although numerous adsorbents have been investigated for the removal of PCs in recent years, biochar-based adsorbents have garnered tremendous scientific attention to eliminate PCs from aqueous matrices because of their decent specific surface area, tunable surface chemistry, scalable production, and environmentally benign nature. This review, therefore, attempts to provide an overview of the latest progress in the application of biochar for the removal of PCs from wastewater. Additionally, the fundamental knowledge gaps in the domain knowledge are identified and novel strategic research guidelines are laid out to make further advances in this promising approach towards sustainable development.

N-doped and activated porous biochar derived from cocoa shell for removing norfloxacin from aqueous solution: Performance assessment and mechanism insight

Environmental pollution has worsened as a result of antibiotic overuse. Nitrogen doping of biochar increases its ability to adsorb antibiotics and has been widely applied as an adsorbent. In this study, we synthesized nitrogen-doped biochar (N-A) from cocoa shell wastes calcined with urea and sodium bicarbonate (NaHCO₃) as nitrogen sources and green activators, respectively. An analysis of the biochar morphology, structure, specific surface area, and functional groups provided an understanding of its properties. As indicated by increased surface area, micropores, and surface functional groups, biochar was enhanced in its performance for norfloxacin adsorption when activated using NaHCO₃ and nitrogen doped. Adsorption experiments revealed that N-A biochar at 700 and 400 °C had a high adsorption capacity for NOR of 134 mg/g (N-A-CSB700) and 112.31 mg/g (N-A-CSB400) when compared to pristine biochar at 59.27 mg/g (CSB700) and 56.34 mg/g (CSB400), indicating that N-A doped modification on biochar greatly improved adsorption capacity. The Langmuir model demonstrated better NOR adsorption isotherms. The pseudo-second order and Elovich models closely followed the adsorption kinetics. Further investigations were conducted to determine how environmental factors influence biochar interaction with NOR. The results indicated a stable NOR removal efficiency was kept at a wide pH range, whereas the ionic strength inhibited the NOR adsorption process. The investigation into the sorption mechanism revealed that pore filling, H-bonding, π-π EDA interactions, ion exchange, and electrostatic attraction may all be implicated in the NOR adsorption process. Specifically, pore filling played the dominant role for N-A-CSB700, while N-A-CSB400 sorption occurred mainly via H-bonding. Since N-A-CSB700 doped biochar combines high adsorption capacity with a low inhibition effect of environmental factors (Na⁺/Ca²⁺), it has a high potential for future practical applications as an environmentally sustainable alternative. It uses low-cost solid waste to produce an adsorbent to cope with emerging contaminants such as antibiotics.

Catalytic pyrolysis of lotus leaves for producing nitrogen self-doping layered graphitic biochar: Performance and mechanism for peroxydisulfate activation

In this study, nitrogen self-doping layered graphitic biochar (Na-BC900) was prepared by catalytic pyrolysis of lotus leaves at 900 ^°C, in the presence of NaCl catalyst, for peroxydisulfate (PDS) activation and sulfamethoxazole (SMX) degradation. NaCl as catalyst played a crucial part in the preparation of Na-BC900 and could be reused. The SMX degradation rate in Na-BC900/PDS system was 12 times higher than that in un-modified biochar (BC900)/PDS system. The excellent performance of Na-BC900 for PDS activation was attributed to its large specific surface areas (SSAs), the enhanced graphitization structure and the high graphitic N content. The quenching and electrochemical experiments, electron paramagnetic resonance (EPR) studies inferred that the radicals included SO₄^•-, ^•OH, O₂^•- and the non-radical processes were driven by ¹O₂ and biochar mediated electron migration. Both radical and non-radical mechanisms contributed to the removal of SMX. Additionally, this catalytic pyrolysis strategy was clarified to be scalable, which can be applied to produce multiple biomass-based biochar catalysts for restoration of polluted water bodies.

Application of sulfate radicals-based advanced oxidation technology in degradation of trace organic contaminants (TrOCs): Recent advances and prospects

The large amount of trace organic contaminants (TrOCs) in wastewater has caused serious impacts on human health. In the past few years, Sulfate radical (SO₄^•-) based advanced oxidation processes (SR-AOPs) are widely recognized for their high removal rates of recalcitrant TrOCs from water. Peroxymonosulfate (PMS) and persulfate (PS) are stable and non-toxic strong oxidizing oxidants and can act as excellent SO₄^•- precursors. Compared with hydroxyl radicals(·OH)-based methods, SR-AOPs have a series of advantages, such as long half-life and wide pH range, the oxidation capacity of SO₄^•- approaches or even exceeds that of ·OH under suitable conditions. In this review, we present the progress of activating PS/PMS to remove TrOCs by different methods. These methods include activation by transition metal, ultrasound, UV, etc. Possible activation mechanisms and influencing factors such as pH during the activation are discussed. Finally, future activation studies of PS/PMS are summarized and prospected. This review summarizes previous experiences and presents the current status of SR-AOPs application for TrOCs removal. Misconceptions in research are avoided and a research basis for the removal of TrOCs is provided.

Waste preserved wood derived biochar catalyst for promoted peroxymonosulfate activation towards bisphenol A degradation with low metal ion release: The insight into the mechanisms

The rational disposal of waste preserved wood is of great significance since its embedded metals (Cu, As, and Cr) pose potential threat to environment and human health. In this study, a biochar catalyst derived from waste preserved wood (PWB) was prepared for the degradation of bisphenol A (BPA) via peroxymonosulfate (PMS) activation. The PWB exhibited prominent catalytic degradation capability towards BPA compared with common wood derived biochar (CWB). Further tests and analysis elucidated that both radical species (OH) and non-radical species (¹O₂) were generated by the PWB/PMS system, whereas only ¹O₂ was detected in CWB/PMS system. Specifically, the metal compounds, especially metallic Cu in the PWB activated PMS via radical pathway, and the CO groups in the biochar generated the non-radical pathway, the coexistence of which resulted in higher BPA degradation rate in PWB/PMS system. It was also demonstrated that the heavy metal ion leaching (As and Cr) in PWB/PMS system was negligible. Furthermore, the biochar could effectively inhibit the leakage of oxidized Cu ions. This study provides a novel approach to prepare high-efficient carbocatalysts for organic pollutant degradation in water, which also enables the waste preserved wood with an environmental nondestructive mode of dispatch.

Adsorption of norfloxacin from aqueous solution on biochar derived from spent coffee ground: Master variables and response surface method optimized adsorption process

In this study, biochar derived from spent coffee grounds (SCGB) was used to adsorb norfloxacin (NOR) in water. The biochar properties were interpreted by analysis of the specific surface area, morphology, structure, thermal stability, and functional groups. The impacts of pH, NOR, and ion's present on SCGB performance were examined. The NOR adsorption mode of SCGB is best suited to the Langmuir model (R² = 0.974) with maximum absorption capacity (69.8 mg g^-1). By using a Response Surface Method (RSM), optimal adsorption was also found at pH of 6.26, NOR of 24.69 mg L^-1, and SCGB of 1.32 g L^-1. Compared with biochars derived from agriculture such as corn stalks, willow branches, potato stem, reed stalks, cauliflower roots, wheat straw, the NOR adsorption capacity of SCGB was 2-30 times higher, but less than 3-4 times for biochars made from Salix mongolica, luffa sponge and polydopamine microspheres. These findings reveal that spent coffee grounds biochar could effectively remove NOR from aqueous solutions. Approaching biochar derived from coffee grounds would be a promising eco-friendly solution because it utilizes solid waste, saves costs, and creates adsorbents to deal with emerging pollutants like antibiotics.

Activation of peroxydisulfate by ball-milled α-FeOOH/biochar composite for phenol removal: Component contribution and internal mechanisms

Persulfate-based advanced oxidation process is considered as a promising technology for the degradation of phenol, where efficient, cost effective, and green methods with high peroxydisulfate (PS) activation capacity is of increasing demand. In this work, an in-situ liquid phase precipitation combined with ball milling method was applied for the synthesized of α-FeOOH/biochar, as be the PS activator for phenol degradation. Results showed that the ball-milled α-FeOOH and red pine wood biochar prepared at 700 °C (BM-α-FeOOH/PBC700) exhibited the highest catalytic property with PS for phenol oxidation (a phenol removal rate of 100%), compared with the BM-α-FeOOH (16.0%) and BMPBC700 (66.3%). The presence of intermediate products such as hydroquinone and catechol, and total organic carbon (TOC) removal rate (88.9%) proved the oxidation of phenol in the BM-α-FeOOH/PBC700+PS system. The characterization results showed that the functional groups (e.g., CO, C-O, Fe-O, and Si-O), the dissolved organic matter (DOM) in biochar, the loading of Fe element, and higher degree of graphitization and defect structures, contributed to the activation of PS to form free radicals (i.e., SO₄^·-, ·OH, ·O₂^-, and h_VB⁺) for phenol oxidation, of which, SO₄·^- and ·OH account for 72.1% of the phenol removal rate. The specific contribution to the PS activation for phenol oxidation by each part of the materials was calculated based on the "whole to part" experiment. The contribution of DOM, acid-soluble substance, and carbon matrix and basal part in BM-α-FeOOH/PBC700 were 6.0%, 40.9%, and 53.1%, respectively. The reusability experiments of BM-α-FeOOH/PBC700 demonstrated that the composite was relatively stable after four cycles of reuse. Among three co-existing anions (NO₃^-, Cl^-, and HCO₃^-), HCO₃^- played the most significant inhibition effects on phenol removal through reducing the phenol removal rate from 89.6% to 77.9%. This work provides guidance for the design of high active and stable carbon materials that activate PS to remove phenol.

Effect of dissolved biochar on the transfer of antibiotic resistance genes between bacteria

The spread of antibiotic resistance genes (ARGs) is a global environmental issue. Dissolved biochar is more likely to contact bacteria in water, producing ecological risks. This study explored the effects of dissolved biochar on ARGs transfer in bacteria. Conjugative transfer efficiency was significantly different following treatment with different types of dissolved biochar. Typically, humic acid-like substance in dissolved biochar can significantly improve the transfer efficiency of ARGs between bacteria. When the concentration of dissolved biochar was ≤10 mg biochar/mL, humic acid-like substance substantially promoted ARGs transfer. An increase in dissolved biochar concentration weakened the ARGs transfer from humic acid-like substance. The inhibitory effects of small-molecule matters dominated, decreasing conjugative transfer frequency. At a concentration of 100 mg biochar/mL, the conjugative transfer efficiency of all treatments was lower than that of control. Compared with corn straw dissolved biochar, there were more transconjugants in pine sawdust dissolved biochar. Following treatment with 10 mg biochar/mL pine sawdust dissolved biochar, the number of transconjugants was at its maximum; approximately 7.3 folds higher than the control. We also explored mechanisms by which dissolved biochar impacts conjugative transfer. Due to the complex composition of dissolved biochar, its effects on the expression of conjugative transfer-related genes were also dynamic. This study investigates the ecological risk of biochar and guides its scientific application.

Degradation, solubility and chromatographic studies of Ibuprofen under high temperature water conditions

Ibuprofen (IBP) is an emerging environmental contaminant having low aqueous solubility which negatively affects the application of advanced oxidation and adsorption processes. It was determined that as the temperature increased to 473 K, the mole fraction solubility increased considerably from 0.02 × 10^-3 to 212.88 × 10^-3 (10600-fold). Calculation of the thermodynamic properties indicated an endothermic process, Δ_solH > 0, with relatively high Δ_solS values. Spectroscopic, thermal and chromatographic analyses established the IBP stability at subcritical conditions. In the second part of the study, the degradation of IBP in H₂O₂-modified subcritical was studied and the effect of each process variable was investigated. The optimum degradation of 88% was reached at an IBP concentration of 15 mg L^-1, temperature of 250 °C, 105 min treatment time and 250 mM H₂O₂. The process was optimized by response surface methodology and a mathematical model was proposed and validated. Temperature was determined as the most influential parameter, followed by H₂O₂ concentration. At temperatures higher than 230 °C, a small but noticeable reduction in degradation % suggested that the OH· radicals are consumed at a higher rate than they are produced, through side reactions with other radicals and/or IBP by-products. Finally, potential by-products were determined by gas chromatographic-mass spectrometric analysis and potential by-products were proposed.

Visible-LED-light-driven photocatalytic degradation of ofloxacin and ciprofloxacin by magnetic biochar modified flower-like Bi2WO6: The synergistic effects, mechanism insights and degradation pathways

Bi₂WO₆ possesses good stability but poor photocatalytic activity under visible light. Herein, the coupling of Bi₂WO₆, Fe₃O₄ and biochar (Bi₂WO₆/Fe₃O₄/BC) was investigated to enhance the photocatalytic performance of Bi₂WO₆ through facile hydrothermal method, which almost completely degraded ofloxacin (OFL) and ciprofloxacin (CIP) within 30 min under energy-saving visible LED irradiation. The superior photocatalytic activity of Bi₂WO₆/Fe₃O₄/BC was ascribed to the stronger visible light adsorption capacity and the lower recombination of electron-hole pairs. O₂^- played a major role during the photocatalytic reaction. The characterization results suggested that the introduction of biochar avoided the agglomeration of Bi₂WO₆ microspheres and Fe₃O₄ nanoparticles, at the same time, the biochar participated in OFL and CIP photodegradation by consuming different oxygen-containing functional groups. In order to further evaluate the application potential of Bi₂WO₆/Fe₃O₄/BC, the effects of environment factors and the application in different actual water were carefully investigated. Various transformation products and the possible degradation pathways of OFL and CIP were analyzed based on high resolution mass spectrometry (HRMS) results, moreover, the toxicity evaluation results of Escherichia coli indicated these intermediates products were less toxic compared OFL and CIP. Overall, Bi₂WO₆/Fe₃O₄/BC can provide a potential way for the application of photocatalytic technology in ambient wastewater purification.

Review on the treatment of organic wastewater by discharge plasma combined with oxidants and catalysts

Discharge plasma technology is a new advanced oxidation technology for water treatment, which includes the effects of free radical oxidation, high energy electron radiation, ultraviolet light hydrolysis, and pyrolysis. In order to improve the energy efficiency in the plasma discharge processes, many efforts have been made to combine catalysts with discharge plasma technology. Some heterogeneous catalysts (e.g., activated carbon, zeolite, TiO₂) and homogeneous catalysts (e.g., Fe²⁺/Fe³⁺, etc.) have been used to enhance the removal of pollutants by discharge plasma. In addition, some reagents of in situ chemical oxidation (ISCO) such as persulfate and percarbonate are also discussed. This article introduces the research progress of the combined systems of discharge plasma and catalysts/oxidants, and explains the different reaction mechanisms. In addition, physical and chemical changes in the plasma catalytic oxidation system, such as the effect of the discharge process on the catalyst, and the changes in the discharge state and solution conditions caused by the catalysts/oxidants, were also investigated. At the same time, the potential advantages of this system in the treatment of different organic wastewater were briefly reviewed, covering the degradation of phenolic pollutants, dyes, and pharmaceuticals and personal care products. Finally, some suggestions for future water treatment technology of discharge plasma are put forward. This review aims to provide researchers with a deeper understanding of plasma catalytic oxidation system and looks forward to further development of its application in water treatment.

New Eco-Materials Derived from Waste for Emerging Pollutants Adsorption: The Case of Diclofenac

This work proposes new eco-materials for the adsorption of diclofenac (DCF). The large consumption of this nonsteroidal anti-inflammatory drug combined with the inefficiency of wastewater treatment plants (WWTPs) leads to its presence in aquatic environments as an emerging pollutant. The adsorption technique is widely used for pharmaceutical removal. Moreover, due to the large effect of commercial adsorbents, in the frame of the Azure Chemistry approach, new sustainable materials are mandatory for removal as emerging pollutants. The work proposes three adsorbents that were obtained from different stabilization methods of fly ash derived from an incinerator plant; the stabilization techniques involved the use of various industrial by-products such as bottom ash, flue gas desulphurization residues, coal fly ash, and silica fume. The best performance, although less than activated carbon, was obtained by COSMOS (COlloidal Silica Medium to Obtain Safe inert: the case of incinerator fly ash), with a removal efficacy of approximately 76% with 15 g/L of material. Several advantages are expected not only from the DCF removal but also from an economic perspective (the newly obtained adsorbents are eco-materials, so they are cheaper in comparison to conventional adsorbents) and in terms of sustainability (no toxic reagents and no heating treatment are involved). This work highlights the adsorption performance of the new eco-materials and their potential use in WWTPs.