Removal of pharmaceutical and personal care products (PPCPs) from waterbody using a revolving algal biofilm (RAB) reactor

Delignified porous wood as biofilm support for 1,4-dioxane-degrading bacterial consortium

Delignified porous wood samples were used as carriers for biofilm formation of a bacterial consortium with the ability to degrade 1,4-dioxane (DX). The delignification treatment of the natural wood resulted in higher porosity, formation of macropores, increase in surface roughness and hydrophilicity of the treated wood pieces. These superior properties of two types of treated carriers (respectively, A and B) compared to the untreated wood resulted in 2.19 ± 0.52- and 2.66 ± 0.23-fold higher growth of biofilm. Moreover, analysis of the fatty acid profiles indicated an increase in proportion of the saturated fatty acids during the biofilm formation, characterising an enhancement in rigidity and hydrophobicity of the biofilms. DX initial concentration of 100 mg/L was completely degraded (detection limit 0.01 mg/L) in 24 and 32 h using the treated A and B woods, while only 25.84 ± 5.95% was removed after 32 h using the untreated wood. However, fitting the DX biodegradation data to the Monod model showed a lower maximum specific growth rate for biofilm (0.0276 ± 0.0018 1/h) versus planktonic (0.0382 ± 0.0024 1/h), because of gradual accumulation of inactive cells in the biofilm. Findings of this study can contribute to the knowledge of biofilm formation regarding the physical/chemical properties of biofilm carriers and be helpful to the ongoing research on bioremediation of DX.

Emerging revolving algae biofilm system for algal biomass production and nutrient recovery from wastewater

Toward the direction of zero‑carbon emission and green technologies for wastewater treatment, algae-based technologies are considered promising candidates to deal with the current situation of pollution and climate change. Recent developments of algae-based technologies have been introduced in previous studies in which their performances were optimized for wastewater treatment and biomass production. Among these, revolving algae biofilm (RAB) reactors have been proven to have a great potential in high biomass productivity, simple harvesting method, great CO2 transfer rate, high light-use efficiency, heavy metal capture, nutrient removal, and acid mine drainage treatment in previous studies. However, there were few articles detailing RAB performance, which concealed its enormous potential and diminished interest in the model. Hence, this review aims to reveal the major benefit of RAB reactors in simultaneous wastewater treatment and biomass cultivation. However, there is still a lack of research on aspects to upgrade this technology which requires further investigations to improve performance or fulfill the concept of circular economy.

Removal of organic and inorganic contaminants from the air, soil, and water by algae

Rapid increases in human populations and development has led to a significant exploitation of natural resources around the world. On the other hand, humans have come to terms with the consequences of their past mistakes and started to address current and future resource utilization challenges. Today's primary challenge is figuring out and implementing eco-friendly, inexpensive, and innovative solutions for conservation issues such as environmental pollution, carbon neutrality, and manufacturing effluent/wastewater treatment, along with xenobiotic contamination of the natural ecosystem. One of the most promising approaches to reduce the environmental contamination load is the utilization of algae for bioremediation. Owing to their significant biosorption capacity to deactivate hazardous chemicals, macro-/microalgae are among the primary microorganisms that can be utilized for phytoremediation as a safe method for curtailing environmental pollution. In recent years, the use of algae to overcome environmental problems has advanced technologically, such as through synthetic biology and high-throughput phenomics, which is increasing the likelihood of attaining sustainability. As the research progresses, there is a promise for a greener future and the preservation of healthy ecosystems by using algae. They might act as a valuable tool in creating new products.

Competitive adsorption of sulfamethoxazole and bisphenol A on magnetic biochar: Mechanism and site energy distribution

Competitive adsorption and complementary adsorption between emerging pollutants has been observed in multiple studies. Investigation of the preference of pollutants for different types of adsorption sites can provide a supplementary perspective for understanding complementary adsorption. In this study, the simultaneous adsorption of two typical emerging pollutants, sulfamethoxazole (SMX) and bisphenol A (BPA), on magnetic biochar (MBC-1) was investigated. The results showed that the modification with ferric chloride optimized the surface properties of biochar (aromaticity, hydrophobicity, and oxygen-containing functional groups, etc.), and helped to remove SMX and BPA through various interactions. The equilibrium adsorption capacity of the two adsorbents was inhibited by competitive adsorption in the mixed solute systems, which was due to the same adsorption mechanism. When pH = 7, the SMX and BPA adsorption mainly involved pore filling, hydrophobic effect, π-π EDA, and hydrogen bonding. In addition, electrostatic force, surface coordination, and ion exchange have also been proven to be related to the adsorption of SMX and BPA. In the co-adsorption system, BPA's competitive advantage might be due to its superior hydrophobicity, charge property, and molecular diameter. In the competitive adsorption experiment, the total adsorption capacity (Q_i) of the competitive solute exceeded the adsorption inhibition (△Q_i) of the main solute, indicating that the two solutes occupied their preferred adsorption sites, which confirmed the complementary adsorption phenomenon. Complementary adsorption can be explained by the preference of SMX and BPA for different types of adsorption sites. BPA preferentially occupied high-energy sites in the co-adsorption system, such as π-π EDA interaction, ion exchange, and surface coordination. At the same time, SMX tended to be removed by hydrophobic interaction and hydrogen bonding.

Progressive Biocatalysts for the Treatment of Aqueous Systems Containing Pharmaceutical Pollutants

The review focuses on the appearance of various pharmaceutical pollutants in various water sources, which dictates the need to use various methods for effective purification and biodegradation of the compounds. The use of various biological catalysts (enzymes and cells) is discussed as one of the progressive approaches to solving problems in this area. Antibiotics, hormones, pharmaceuticals containing halogen, nonsteroidal anti-inflammatory drugs, analgesics and antiepileptic drugs are among the substrates for the biocatalysts in water purification processes that can be carried out. The use of enzymes in soluble and immobilized forms as effective biocatalysts for the biodegradation of various pharmaceutical compounds (PCPs) has been analyzed. Various living cells (bacteria, fungi, microalgae) taken as separate cultures or components of natural or artificial consortia can be involved in biocatalytic processes under aerobic or anaerobic conditions. Cells as biocatalysts introduced into water treatment systems in suspended or immobilized form are used for deep biodegradation of PCPs. The potential of combinations of biocatalysts with physical-chemical methods of wastewater treatment is evaluated in relation to the effective removing of PCPs. The review analyzes recent results and the main current trends in the development of biocatalytic approaches to biodegradation of PCPs, the pros and cons of the processes and the biocatalysts used.

Exploring eco-friendly approaches for mitigating pharmaceutical and personal care products in aquatic ecosystems: A sustainability assessment

Global water scarcity is exacerbated by climate change, population growth, and water pollution. Over half of the world's population will be affected by water shortages for at least a month annually by 2050 due toa lack of clean water sources. Even though recycling wastewater helps meet the growing demand, new pollutants, including pharmaceuticals and personal care products (PPCPs), pose a health threat since conventional methods cannot remove them and their environmental monitoring regulations are yet in place. Therefore, the current review aims to investigate and propose eco-friendly technologies for removing PPCPs from wastewater and their implementation strategies for ecosystem safety. Findings indicated the absence of a single wastewater treatment technology that can remove all PPCPs in a single operation. Instead, biotechnological methods are one of the alternatives that can remove PPCPs from aquatic environments. In this context, community involvement and knowledge transfer are identified keys to clean water resources' long-term sustainability.

Magnetically engineered sulfurized peat-based activated carbon for remediation of emerging pharmaceutical contaminants

Activated carbon derived from peat-based biomass was sulfurized and magnetized forming magnetically-engineered sulfurized peat-based activated carbon (MEPBAC) and used for adsorption of caffeine (CFN) and sulfamethoxazole (SMX) from aqueous media. Modification increased the surface area (724 m²/g) and introduced sulphur-groups and Fe-based nano-structures in MEPBAC. Sulphur-groups enhanced adsorption efficiency, whereas Fe-based nano-structures facilitated easy magnetic separation of MEPBAC after intended use leading to high reusability with consistent removal efficiency (∼95 %). Response surface methodology was employed for design of experiments and process optimization. The results revealed that the maximum removal (SMX 94 %; CFN 97 %) could be achieved at an adsorbent dose of 1.4 and 1.6 g/L, respectively (pH 11, 311 K). Adsorption kinetics was best explained by a pseudo-second-order kinetic model. Adsorption data of SMX was fitted better to Langmuir (linear) and Freundlich (non-linear) isotherms, whereas that of CFN was fitted well with Freundlich (linear) and Langmuir (non-linear) isotherms (R² ≥ 0.99).

The synergistic mechanism of β-lactam antibiotic removal between ammonia-oxidizing microorganisms and heterotrophs

Nitrifying system is an effective strategy to remove numerous antibiotics, however, the contribution of ammonia-oxidizing bacteria (AOB), ammonia-oxidizing archaea (AOA) and heterotrophs for antibiotic removal are still unclear. In this study, the mechanism of β-lactam antibiotic (cefalexin, CFX) removal was studied in a nitrifying sludge system. Results showed that CFX was synergistically removed by AOB (Nitrosomonas, played a major role) and AOA (Candidatus_Nitrososphaera) through ammonia monooxygenase-mediated co-metabolism, and by heterotrophs (Pseudofulvimonas, Hydrogenophaga, RB41, Thauera, UTCFX1, Plasticicumulans, Phaeodactylibacter) through antibiotic resistance genes (ARGs)-encoded β-lactamases-mediated hydrolysis. Regardless of increased archaeal and heterotrophic CFX removal with the upregulation of amoA in AOA and ARGs, the system exhibited poorer CFX removal performance at 10 mg/L, mainly due to the inhibition of AOB. This study provides new reference for the important roles of heterotrophs and ARGs, opening the possibilities for the application of ARGs in antibiotic biodegradation.

Ecological and human health risks of antibiotics in marine species through mass transfer from sea to land in a coastal area: A case study in Qinzhou Bay, the South China sea

Antibiotics have been detected in aquatic environment around the world. Understanding internal concentrations of antibiotics in organisms could further improve risk governance. In this study, we investigated the occurrence of seven sulfonamides, four tetracyclines, five fluoroquinolones, and five macrolides antibiotics in six fish, four crustaceans, and five mollusks species collected from Qinzhou Bay, an important part of the Beibu Gulf in the South China Sea in 2018. 19 of all the 21 target antibiotics were detectable in biota. The total concentrations of the antibiotics ranged from 15.2 to 182 ng/g dry weight in all marine organisms, with sulfonamides and macrolides being the most abundant antibiotics. Mollusks accumulated more antibiotics than fish and crustaceans, implying the species-specific bioaccumulation of antibiotics. The pH dependent partition coefficients of antibiotics exhibited significantly positive correlation with their concentrations in organisms. The ecological risk assessment suggested that marine species in Qinzhou Bay were threatened by azithromycin and norfloxacin. The annual mass loading of antibiotics from Qinzhou Bay to the coastal land area for human ingestion via marine fishery catches was 4.02 kg, with mollusks being the predominant migration contributor. The estimated daily intakes of erythromycin indicated that consumption of seafood from Qinzhou Bay posed considerable risks to children (2-5 years old). The results in this study provide important insights for antibiotics pollution assessment and risk management.

Synergistic improving photo-Fenton and photo-catalytic degradation of carbamazepine over FeS2/Fe2O3/organic acid with H2O2in-situ generation

Herein, a heterogeneous photo-Fenton and photo-catalytic system was constructed using oxide pyrite (FeS₂/Fe₂O₃) mineral and organic acids including tartaric acid (TA), ascorbic acid (AA), and citric acid (CA). In the proposed system, FeS₂/Fe₂O₃ can be successfully activated through irradiation to generate photogenerated carriers, which generated H₂O₂in-situ through the reduction reactions between e^- and O₂. The addition of organic acids enhanced the dissolution of iron from FeS₂/Fe₂O₃. Based on the iron and in-situ generated H₂O₂, •OH was produced through a photo-Fenton reaction. Furthermore, h⁺, e^-, and •O₂^-, which were generated through the photo-catalytic activation of FeS₂/Fe₂O₃, also played a certain role in the degradation of carbamazepine (CBZ). Therefore, the synergistic photo-Fenton and photo-catalytic reaction improved the degradation of CBZ, with the degradation efficiencies of 86%, 62%, and 68% in FeS₂/Fe₂O₃/TA, FeS₂/Fe₂O₃/AA, and FeS₂/Fe₂O₃/CA systems, respectively. This investigation provides an innovative strategy for the removal of organic pollutants using natural minerals.

An efficient Fe2+ assisted UV/electrogenerated-chlorine process for carbamazepine degradation: The role of Fe(IV)

To improve the performance and solve the restrictions of UV/chlorine process (e.g., the narrow pH application range and high disinfection by-products (DBPs) formation), a Fe²⁺ assisted advanced oxidation process with electrochemically generated chlorine (UV/E-Cl/Fe²⁺) was proposed for carbamazepine (CBZ) degradation, which eliminated CBZ (5 mg/L) within 4 min under the optimal conditions. Compared with UV/electro-generated chlorine (UV/E-Cl) and anodic oxidation-chlorination/Fe²⁺ (AO-Cl/Fe²⁺) processes, the apparent first-order kinetics constant in UV/E-Cl/Fe²⁺ increased by 2.56 and 3.18 times respectively, and the energy consumption was lower (1.15 kWh/m³-log). Simultaneously, the pH application range could be expanded to 9, and DBPs formed in this process were 17.1% less than those in UV/E-Cl. Through quenching tests, electron paramagnetic resonance (EPR) experiments, measurement of ^•OH concentration, quantification of methyl phenyl sulfoxide (PMSO) and benzosulfone (PMSO₂) and processes comparison, possible CBZ degradation pathways and mechanism of UV/E-Cl/Fe²⁺ were proposed, in which Fe(IV) played the dominant role in the early stage, while the production of radicals (i.e., ^•OH and Cl^•) was enhanced with the increase of chlorine generation, accelerating the CBZ removal. Furthermore, this process demonstrated wide application prospect in treating various contaminants and real wastewaters. In conclusion, this study offers an effective and energy-efficient method for organic pollutants degradation.

Progress in pre-treatment and extraction of organic and inorganic pollutants by layered double hydroxide for trace-level analysis

Continuous release of pollutants into the environment poses serious threats to environmental sustainability and human health. For trace-level analysis of pollutants, layered double hydroxide (LDH) is an attractive option to impart enhanced sorption capability and sensitivity toward pollutants because of its unique layered structure, tunable interior architecture, high anion-exchange capacities, and high porosity (e.g., Zn/Cr LDH/DABCO-IL, Ni/Al LDH, CS-Ni/Fe LDH, SDS-Fe₃O₄@SiO₂@Mg-Al LDH, Boeh/Mg/Al LDH/pC, and Fe@NiAl LDH). In concert with the well-defined analytical methodologies (e.g., HPLC and GC), the LDH materials can be employed to detect trace-level targets (e.g., as low as ∼ 20 fg/L for phenols) in aqueous environments. This review highlights LDH as a promising material for pre-treatment of a variety of organic and inorganic target pollutants in complex real matrices. Challenges and future requirements for research into LDH-based analytical methods are also discussed.

Cuttlefish bone powder as an efficient solid-phase extraction sorbent of anti-SARS-CoV-2 drugs in environmental water

Many antiviral drugs were developed to counteract coronavirus disease, 2019 (COVID-19) with severe acute respiratory syndrome. Therefore, the scientific community's efforts have focused on the detection and quantification of antiviral compounds currently being tested for COVID-19 treatment. Cuttlefish bone powder (CFBP) has been used for the first time as solid-phase extraction (SPE) sorbent for the extraction of SARS CoV-2 antiviral drugs (chloroquine, ritonavir and indomethacin) from water samples. An effective and sensitive method was developed by combining SPE and liquid chromatography- UV detection (LC-UV). An experimental design was applied for the optimization of extraction process. Experimental variables were optimized using Doehlert matrix. The developed method included 50 mg of CFBP sorbent, 20 mL of water sample at pH = 9 and 5 mL of ACN/KH₂PO₄ buffer solution (80:20, v/v) in the elution step. For validation of the method, selectivity, linearity precision, and sensitivity were evaluated. Extraction recovery percentage of all Sars cov-2 antivirals were above 98.2%. The detection and quantification limits were between 0.1 and 0.5 µg L⁻¹ and 0.6 and 2 µg L⁻¹, respectively. The current study suggested that CFBP has the application potential for the enhanced SPE of SARS CoV-2 antiviral drugs from water samples.

Underlying mechanisms of promoted formation of haloacetic acids disinfection byproducts after indometacin degradation by non-thermal discharge plasma

Indometacin (IDM), as a kind of non-steroidal anti-inflammatory drugs, has ecological and health risks, which is the potential precursor of chlorination disinfection byproducts (DBPs). Non-thermal discharge plasma was attempted to eliminate IDM and control subsequent DBPs formation. Satisfactory removal performance for IDM was realized by the plasma oxidation; almost 100% of IDM was removed within 2 min. Relatively greater removal efficiency was gained at a higher plasma voltage and a lower pH level. Electron paramagnetic resonance spectrometer revealed that reactive species ·OH, O₂·^-, and ¹O₂ were responsible for IDM decomposition. Based on analyses of Fourier transform infrared spectroscopy, two-dimensional correlation spectroscopy, three-dimensional fluorescence spectrum, and gas chromatography-mass spectrometer, attacks of reactive species resulted in sequence breakages in functional groups of IDM, leading to production of small molecular alcohols, acids, and amines. Possible decomposition pathways of IDM were proposed. The produced acetamide and 1H-indol-5-ol were important precursors of DBPs. Formation and toxicity of nitrogen-containing DBPs were dramatically inhibited after IDM degradation; however, those of haloacetic acids were strengthened. The relevant roadmaps among DBPs and degradation intermediates were figured out. This study revealed the underlying mechanisms of IDM degradation by discharge plasma and its potential risks in chlorination disinfection.

Pharmaceuticals and personal care products in aquatic environments and their removal by algae-based systems

The consumption of pharmaceuticals and personal care products (PPCPs) has been widely increasing, yet up to 90-95% of PPCPs consumed by human are excreted unmetabolized. Moreover, the most of PPCPs cannot be fully removed by wastewater treatment plants (WWTPs), which release PPCPs to natural water bodies, affecting aquatic ecosystems and potentially humans. This study sought to review the occurrence of PPCPs in natural water bodies globally, and assess the effects of important factors on the fluxes of pollutants into receiving waterways. The highest ibuprofen concentration (3738 ng/L) in tap water was reported in Nigeria, and the highest naproxen concentration (37,700 ng/L) was reported in groundwater wells in Penn State, USA. Moreover, the PPCPs have affected aquatic organisms such as fish. For instance, up to 24.4 × 10³ ng/g of atenolol was detected in P. lineatus. Amongst different technologies to eliminate PPCPs, algae-based systems are environmentally friendly and effective because of the photosynthetic ability of algae to absorb CO₂ and their flexibility to grow in different wastewater. Up to 99% of triclosan and less than 10% of trimethoprim were removed by Nannochloris sp., green algae. Moreover, variable concentrations of PPCPs might adversely affect the growth and production of algae. The exposure of algae to high concentrations of PPCPs can reduce the content of chlorophyll and protein due to producing reactive oxygen species (ROS), and affecting expression of some genes in chlorophyll (rbcL, psbA, psaB and psbc).

Assessment of a wide array of organic micropollutants of emerging concern in wastewater treatment plants in Greece: Occurrence, removals, mass loading and potential risks

Exploring the contamination profile of multi-class emerging contaminants (ECs) in wastewater is highly desirable. To this end, the occurrence, removal, mass loading and risks associated with a large panel of pharmaceuticals and personal care products, illicit drugs, perfluorinated compounds and organophosphate flame retardants in two wastewater treatment plants (WWTPs) in the region of Thessaloniki (Greece) after a survey is illustrated. Influent and effluent wastewaters were submitted to solid phase extraction on Oasis HLB cartridges, followed by ultra-high-performance liquid chromatography Orbitrap high-resolution mass spectrometry (UHPLC-Orbitrap MS). Influent concentrations in both WWTPs were notably higher than effluent, with caffeine, acetaminophen, irbesartan and valsartan being the most ubiquitous compounds, exhibiting elevated concentrations. Average effluent concentrations ranged from below the method quantification limits (<MQL) to remarkably high values (μg L^-1 scale), such as for caffeine, acetaminophen, diclofenac, irbesartan and valsartan, among others. Removal efficiencies ranged between -273% for lamotrigine and 100%, i.e., for the UV filter BP1. Notably, the polar compounds such as cytarabine, methotrexate and capecitabine were removed at a rate >80% in both WWTPs, allowing the correlation between logK_ow and removals. Interesting trends for the illicit drugs were revealed by means of mass loading estimation, as in the case of benzoylecgonine (71.6 mg/day/1000 inhabitants). Ecotoxicological risk assessment was evaluated for both single components and mixture, using three approaches: risk quotient (RQ), risk quotient considering frequency (RQ_f) and toxic units (TU). Irbesartan and telmisartan posed a high risk in all trophic levels, while fish was the most sensitive taxa for diclofenac. This work aspires to intensify the surveillance programs for the receiving water bodies, as well as to motivate the investigation of toxicity to non-target organisms.

Critical review on hazardous pollutants in water environment: Occurrence, monitoring, fate, removal technologies and risk assessment

Water is required for the existence of all living things. Water pollution has grown significantly, over the decades and now it has developed as a serious worldwide problem. The presence and persistence of Hazardous pollutants such as dyes, pharmaceuticals and personal care products, heavy metals, fertilizer and pesticides and their transformed products are the matter of serious environmental and health concerns. A variety of approaches have been tried to clean up water and maintain water quality. The type of pollutants present in the water determines the bulk of technological solutions. The main objective of this article was to review the occurrences and fate of hazardous contaminants (dyes, pharmaceuticals and personal care products, heavy metals, and pesticides) found in wastewater effluents. These effluents mingle with other streams of water and that are utilized for a variety of reasons such as irrigation and other domestic activities that is further complicating the issue. It also discussed traditional treatment approaches as well as current advances in hazardous pollutants removal employing graphite oxides, carbon nanotubes, metal organic structures, magnetic nano composites, and other innovative forms of useable materials. It also discussed the identification and quantification of harmful pollutants using various approaches, as well as current advancements. Finally, a risk assessment of hazardous pollutants in water is provided in terms of the human health and the environment. This data is anticipated to serve as a foundation for future improvements in hazardous pollutant risk assessment. Furthermore, future studies on hazardous pollutants must not only emphasize on the parent chemicals, as well as on their possible breakdown products in various media.

New concept in swine wastewater treatment: development of a self-sustaining synergetic microalgae-bacteria symbiosis (ABS) system to achieve environmental sustainability

Much attention has been paid to developing methods capable of synchronous removal of pollutants from swine wastewater. Due to the natural symbiotic interactions between microalgae and bacteria, the microalgae-bacteria symbiosis (ABS) system has been found to have potential for treating wastewater. However, the corresponding biological mechanisms in the ABS system and the role of dynamic microbial community evolution in pollutant removal systems remain poorly understood. Therefore, we investigate the potential of an ABS system for pollutant removal applications and analyze the bacterial consortium symbiotically combined with Chlorella sp. MA1 and Coelastrella sp. KE4. The NH₄⁺-N and PO₄^3--P removal efficiencies were significantly increased from 12.79% to 99.52% and 35.66% to 96.06% due to biotic interactions between the microalgae and bacteria. The abundance of bacterial taxa and genes related to oxidative stress, cell growth and nitrogen transfer were found to increase in response to photosynthesis, respiration and NH₄⁺-N uptake. Furthermore, pathogen inactivation was induced via microalgae, co-driven by microbial succession under high dissolved oxygen conditions. In this microalgae-enhanced ABS system, the interactions between microalgae and bacteria are established for pathogens elimination and nitrogen cycling, verifying that the ABS system is an effective and environmentally sustainable swine wastewater treatment method.

Au nanoparticle plasmon-enhanced electrochemiluminescence aptasensor based on the 1D/2D PTCA/CoP for diclofenac assay

The combination of localized surface plasmon resonance (LSPR) and electrochemiluminescence (ECL) can be an effective way to amplify the signal intensity. In this work, an ECL aptasensor with 3,4,9,10-perylenetetracarboxylic acid-decorated cobalt phosphate (denoted as PTCA/CoP) as the ECL emitter and Au nanoparticles (NPs) as plasma was proposed for diclofenac assay. The prepared PTCA/CoP with special 1D/2D structure exhibited good ability and excellent ECL performance. The diclofenac aptamer acted as a bridge to link the PTCA/CoP and Au NPs; thus, the ECL performance of PTCA/CoP was greatly improved due to the plasma effect of Au NPs. Besides, it was found that the ECL signal of the aptasensor was obviously quenched by the introduction of diclofenac, which might be due to the transformation from the LSPR process to the resonance energy transform (RET) process. Under optimal conditions, the difference of ECL intensity was negatively correlated with the concentration of diclofenac in the range 0.1 pM to 10 μM with a low detection limit of 0.072 pM at the potential of -1.8 V vs. Ag/AgCl (S/N = 3). The aptasensor was proved to be suitable for the detection of diclofenac in real samples, suggesting its great practicability.

Pharmaceutical compound removal efficiency by a small constructed wetland located in south Brazil

The fate of pharmaceuticals during the treatment of effluents is of major concern since they are not completely degraded and because of their persistence and mobility in environment. Indeed, even at low concentrations, they represent a risk to aquatic life and human health. In this work, fourteen pharmaceuticals were monitored in a constructed wetland wastewater treatment plants (WWTP) assessed in both influent and effluent samples. The basic water quality parameters were evaluated, and the removal efficiency of pharmaceutical, potential for bioaccumulation, and the impact of WWTP were assessed using Polar Organic Chemical Integrative Sampler (POCIS) and biofilms. The pharmaceutical compounds were quantified by High Performance Liquid chromatography coupled to mass spectrometry. The sampling campaign was carried out during winter (July/2018) and summer (January/2019). The WWTP performed well regarding the removal of TSS, COD, and BOD₅ and succeeded to eliminate a significant part of the organic and inorganic pollution present in domestic wastewater but has low efficiency regarding the removal of pharmaceutical compounds. Biofilms were shown to interact with pharmaceuticals and were reported to play a role in their capture from water. The antibiotics were reported to display a high risk for aquatic organisms.