Multiple hydrogen bonding self-assembly tailored electrospun polyimide hybrid filter for efficient air pollution control

Self-crystal electret poly(lactic acid) nanofibers for high-flow air purification and AI-assisted respiratory diagnosis

Particulate matters (PMs), one of the major airborne pollutants, continue to seriously threaten human health and the environment. Here, a self-crystal-induced electret enhancement (SCIEE) strategy was developed to promote the in-situ electret effect and polarization properties of electrospun poly(L-lactic acid) (PLLA) nanofibers. The strategy specifically involved the elaborate pre-structuring of stereocomplex crystals (SCs) with uniform dimensions (∼300 nm), which were introduced into PLLA electrospinning solution as the electrets and physical cross-linking points of high density. It enabled direct fabrication of self-crystal electret poly(lactic acid) (SCE-PLA) nanofibrous membranes (NFMs), effective regulation of nanofiber morphology, enhanced generation of electroactive phases (β phases, SCs, and interfacial domains), synergistically contributing to remarkable increase of dielectric constant (2.48), surface potential (4.60 kV) and charge regeneration performance (tribo-output voltage as high as 37.60 V). This permitted multiple improvements in physical interception and electrostatic adsorption of PMs, as exemplified by efficient removal of PM0.3 and PM2.5 (94.91 % and 99.15 %) with ultralow air resistance (57.2 Pa, 32 L/min), in clear contrast to the pure PLA counterpart (82.66 % and 80.98 %). Given sustainable regeneration of plentiful charges, SCE-PLA NFMs exhibited long-term electret effect and PM0.3 removal (92.53 %) even at intensive inhalation and exhalation airflow (120 and 100 L/min). Moreover, the electroactive SCE-PLA NFMs were ready to realize high-accuracy monitoring (99.23 %) of the respiratory patterns. Our SCIEE strategy opens up a promising pathway to fabricate ecofriendly nanofibers featuring superior in-situ electret effect and charge regeneration capability, appealing for air purification and passive monitoring.

Bioinspired H-Bonding Connected Gradient Nanostructure Actuators Based on Cellulose Nanofibrils and Graphene

The construction of flexible actuators with ultra-fast actuation and robust mechanical properties is crucial for soft robotics and smart devices, but still remains a challenge. Inspired by the unique mechanism of pinecones dispersing seeds in nature, a hygroscopic actuator with interlayer network-bonding connected gradient structure is fabricated. Unlike most conventional bilayer actuator designs, the strategy leverages biobased polyphenols to construct strong interfacial H-bonding networks between 1D cellulose nanofibers and 2D graphene oxide, endowing the materials with high tensile strength (172 MPa) and excellent toughness (6.64 MJ m-3). Furthermore, the significant difference in hydrophilicity between GO and rGO, along with the dense interlayer H-bonding, enables ultra-fast water exchange during water absorption and desorption processes. The resulted actuator exhibits ultra-fast driving speed (154° s-1), excellent pressure-resistant and cyclic stability. Taking advantages of these benefits, the actuator can be fabricated into smart devices (such as smart grippers, humidity control switches) with significant potential for practical applications. The presented approach to constructing interlayer H-bonding in gradient structures is instructive for achieving high performance and functionalization of biomass nanomaterials and the complex of 1D/2D nanomaterials.

Laser Fabrication of Humidity Sensors on Ethanol-Soaked Polyimide for Fully Contactless Respiratory Monitoring

Humidity-sensor-based fully contactless respiratory monitoring can eliminate the discomfort and infection risks associated with any wearable device. However, challenges in the facile fabrication of highly sensitive humidity sensors continue to hinder their widespread application for fully contactless respiratory monitoring. In this study, we introduce a simple method to fabricate highly sensitive humidity sensors. Our method employs laser-induced graphene (LIG) on an ethanol-soaked polyimide (PI) film as the electrode of the humidity sensor. The ethanol-soaked PI between adjacent LIG electrodes functions as the sensing material, enabling ion-conductive humidity sensing. Compared to the LIG humidity sensors fabricated on untreated PI films, LIG humidity sensors fabricated on ethanol-soaked PI films exhibit superior performance with higher linearity (R2 = 0.9936), reduced hysteresis (ΔH = 5.1% RH), and increased sensitivity (0.65%/RH). Notably, the LIG humidity sensor fabricated on the ethanol-soaked PI film can detect a person's breathing from a distance of 30 cm, a capability not achieved by sensors fabricated on untreated PI films. Moreover, incorporating these LIG humidity sensors into an array further enhances both the detection distance and the sensitivity for respiratory monitoring. Experimental results demonstrate that the LIG humidity sensor array can be employed for fully contactless on-bed respiration monitoring and for continuous, fully contactless monitoring of the respiratory rate during treadmill exercise. These results highlight the great potential of our LIG humidity sensors for various practical applications in medicine and sports.

Hierarchically Micro- and Mesoporous Zeolitic Imidazolate Frameworks Through Selective Ligand Removal

A new method to engineer hierarchically porous zeolitic imidazolate frameworks (ZIFs) through selective ligand removal (SeLiRe) is presented. This innovative approach involves crafting mixed-ligand ZIFs (ML-ZIFs) with varying proportions of 2-aminobenzimidazole (NH2-bIm) and 2-methylimidazole (2-mIm), followed by controlled thermal treatments. This process creates a dual-pore system, incorporating both micropores and additional mesopores, suggesting selective cleavage of metal-ligand coordination bonds. Achieving this delicate balance requires adjustment of heating conditions for each mixed-ligand ratio, enabling the targeted removal of NH2-bIm from a variety of ML-ZIFs while preserving their inherent microporous framework. Furthermore, the distribution of the initial thermolabile ligand plays a pivotal role in determining the resulting mesopore architecture. The efficacy of this methodology is aptly demonstrated through the assessment of hierarchically porous ZIFs for their potential in adsorbing diverse organic dyes in aqueous environments. Particularly striking is the performance of the 10%NH2-ZIF-2 h, which showcases an astonishing 40-fold increase in methylene blue adsorption capacity compared to ZIF-8, attributed to larger pore volumes that accelerate the diffusion of dye molecules to adsorption sites. This versatile technique opens new avenues for designing micro/mesoporous ZIFs, particularly suited for liquid media scenarios necessitating efficient active site access and optimal diffusion kinetics, such as purification, catalysis, and sensing.

Hyperbranched Polymer Induced Antibacterial Tree-Like Nanofibrous Membrane for High Effective Air Filtration

The air filtration materials with high efficiency, low resistance, and extra antibacterial property are crucial for personal health protection. Herein, a tree-like polyvinylidene fluoride (PVDF) nanofibrous membrane with hierarchical structure (trunk fiber of 447 nm, branched fiber of 24.7 nm) and high filtration capacity is demonstrated. Specifically, 2-hydroxypropyl trimethyl ammonium chloride terminated hyperbranched polymer (HBP-HTC) with near-spherical three-dimensional molecular structure and adjustable terminal positive groups is synthesized as an additive for PVDF electrospinning to enhance the jet splitting and promote the formation of branched ultrafine nanofibers, achieving a coverage rate of branched nanofibers over 90% that is superior than small molecular quaternary ammonium salts. The branched nanofibers network enhances mechanical properties and filtration efficiency (99.995% for 0.26 µm sodium chloride particles) of the PVDF/HBP-HTC membrane, which demonstrates reduced pressure drop (122.4 Pa) and a quality factor up to 0.083 Pa-1 on a 40 µm-thick sample. More importantly, the numerous quaternary ammonium salt groups of HBP-HTC deliver excellent antibacterial properties to the PVDF membranes. Bacterial inhibitive rate of 99.9% against both S. aureus and E. coli is demonstrated in a membrane with 3.0 wt% HBP-HTC. This work provides a new strategy for development of high-efficiency and antibacterial protection products.

Management of typical VOCs in air with adsorbents: status and challenges

The serious harm of volatile organic compounds (VOCs) to the ecological environment and human health has attracted widespread attention worldwide. With economic growth and accelerated industrialization, the anthropogenic emissions of VOCs have continued to increase. The most crucial aspect is to choose the appropriate adsorbent, which is very important for the VOCs removal. The search for environmentally friendly VOCs treatment technologies is urgent. The adsorption method is one of the most promising VOCs emission reduction technologies with the advantages of high cost-effectiveness, simple operation, and low energy consumption. One of the most critical aspects is the selection of the appropriate adsorbent, which is very important for the removal of VOCs. This work provides an overview of the sources and hazards of VOCs, focusing on recent research advances in VOCs adsorption materials and the key factors controlling the VOCs adsorption process. A summary of the key challenges and opportunities for each adsorbent is also provided. The adsorption capacity for VOCs is enhanced by an abundant specific surface area; the most efficient adsorption process is achieved when the pore size is slightly larger than the molecular diameter of VOCs; the increase in the number of chemical functional groups contributes to the increase in adsorption capacity. In addition, methods of activation and surface modification to improve the adsorption capacity for VOCs are discussed to guide the design of more advanced adsorbents.

Spiral grass inspired eco-friendly zein fibrous membrane for multi-efficient air purification

Air pollution, one of the severest threats to public health, may lead to cardiovascular and respiratory illnesses. In order to cope with the deteriorating air pollutant, there is an increasing demand for filters with high purification efficiency, but it's tough to strike a balance between efficiency and resistance. Fabricating an eco-friendly fibrous filter which can capture both PM2.5 and gaseous chemical hazards with high efficiency but under ultra-low resistance is a long-term challenge. Herein, inspired by the interesting ribbon shape of spiral grass, a green and robust 3D nonwoven membrane with controllable hierarchical structure made of self-curved zein nanofibers modified by zeolitic imidazolate framework-8 (ZIF-8) via bi-solvent electrospinning and fumigation welding method was fabricated. The obtained ZIF-8 modified zein membranes showed extraordinary overall performance with high PM2.5 removal efficiency (99.04 %) at a low stress drop (54.87 Pa), first-rate formaldehyde removal efficiency (98.8 %) and excellent photocatalytic antibacterial. In addition, the relatively weak mechanical properties of zein fibrous membranes have been improved via solvent fumigation welding of the joint zein fibers. This study provides a green and convenient insight to the manufacturing of environmentally-friendly zein fibrous membranes with high filtration efficiency, low air resistance and high formaldehyde removal for sustainable air remediation.

Thermal vacuum de-oxygen fabrication of new catalytic pigments: SiO2@TiO2-x amorphous photonic crystals for formaldehyde removal

Eliminating benzene and formaldehyde pollution is indispensable after the popularity of colorful home decoration in current society. The possibility and advantages of vividly colorful amorphous photonic crystals (APCs) as catalytic pigments were established. Biomimetic synthesis of APCs is an effective approach to obtaining angle-independent structural colors. Herein, we introduce oxygen vacancies through thermal vacuum de-oxygenation to synthesize SiO₂@TiO_2-x APCs for angle-independent structural colors and enhanced photocatalytic performance in one step. Core-shell nanospheres with controllable particle size were synthesized using a mixed-solvent method as the structural unit of APCs to prepare seven structural colors: red, orange, yellow, green, cyan, blue, and purple. The photocatalytic activity of in situ fabricated SiO₂@TiO_2-x APCs was conspicuously enhanced by thermal vacuum deoxidation. An amorphous layer formed on the TiO₂ nanocrystals provides TiO_2-x with excellent spectral response to visible light, transient photocurrent, and surface photovoltage up to 38.44 μA cm^-2 and 28.8 mV, respectively. Black TiO_2-x absorbs incoherent scattering, causing APCs to generate vividly angle-independent structural colors. The existence of oxygen vacancies in TiO_2-x promotes electron activation and a synergistic effect with the photonic local effect of APCs in improving the degradation of formaldehyde by catalytic pigments, effectively protecting the beautiful living environment of human beings.

High-performance multifunctional electrospun fibrous air filter for personal protection: A review

With the increasingly serious air pollution and the rampant coronavirus disease 2019 (COVID–19), preparing high–performance air filter to achieve the effective personal protection has become a research hotspot. Electrospun nanofibrous membrane has become the first choice of air filter because of its small diameter, high specific surface area and porosity. However, improving the filtration performance of the filter only cannot meet the personal needs: it should be given more functions based on high filtration performance to maximize the personal benefits, called, multifunctional, which can also be easily realized by electrospinning technology, and has attracted much attention. In this review, the filtration mechanism of high–performance electrospun air filter is innovatively summarized from the perspective of membrane. On this basis, the specific preparation process, advantages and disadvantages are analyzed in detail. Furthermore, other functions required for achieving maximum personal protection benefits are introduced specifically, and the existing high–performance electrospun air filter with multiple functions are summarized. Finally, the challenges, limitations, and development trends of manufacturing high–performance air filter with multiple functions for personal protection are presented.

Adsorption and Degradation of Volatile Organic Compounds by Metal-Organic Frameworks (MOFs): A Review

Volatile organic compounds (VOCs) are a major threat to human life and health. The technologies currently used to remove VOCs mainly include adsorption and photocatalysis. Adsorption is the most straightforward strategy, but it cannot ultimately eliminate VOCs. Due to the limited binding surface, the formaldehyde adsorption on conventional photocatalysts is limited, and the photocatalytic degradation efficiency is not high enough. By developing novel metal-organic framework (MOF) materials that can catalytically degrade VOCs at room temperature, the organic combination of new MOF materials and traditional purification equipment can be achieved to optimize adsorption and degradation performance. In the present review, based on the research on the adsorption and removal of VOCs by MOF materials in the past 10 years, starting from the structure and characteristics of MOFs, the classification of which was described in detail, the influencing factors and mechanisms in the process of adsorption and removal of VOCs were summarized. In addition, the research progress of MOF materials was summarized, and its future development in this field was prospected.

A Novel Anderson-Evans Polyoxometalate-based Metal-organic Framework Composite for the Highly Selective Isolation and Purification of Cytochrome C from Porcine Heart

Anderson-Evans type polyoxometalate group (Na₆[TeW₆O₂₄]·22 H₂O, TeW₆) was combined with porous metal-organic framework ZIF-8 by electrostatic interaction to obtain a novel Anderson-Evans polyoxometalate-based metal-organic framework composite, TeW₆ @ZIF-8. FT-IR, Raman, XRD, TG, DSC, SEM, and TEM were used to characterize the composite. It was proved that the Anderson-Evans type polyoxometalate group TeW₆ was successfully hybridized with metal-organic framework ZIF-8, and the composite possesses good stability. Based on the potential interaction between TeW₆ and proteins and the coordination between imidazole groups in ZIF-8 and proteins with a porphyrin ring structure, the adsorption selectivity towards different proteins on the TeW₆ @ZIF-8 composite was studied in this work. The experiment results showed that the TeW₆ @ZIF-8 composite was selectively adsorbed to cytochrome C. At pH 11.0, the adsorption efficiency of 94.01% was obtained for processing 1.0 mL 100 μg mL^-1 cytochrome C with 3.0 mg TeW₆ @ZIF-8 composite. The adsorption behavior of cytochrome C fits well with the Langmuir adsorption model, corresponding to a theoretical adsorption capacity of 232.56 mg g^-1. The retained cytochrome C could be readily recovered by 1% SDS (m/m), giving rise to a recovery of 65.6%. Circular dichroism spectra indicate no conformational change for cytochrome C after the adsorption and desorption processes, demonstrating the favorable biocompatibility of TeW₆ @ZIF-8 composite. In applying practical samples, SDS-PAGE results showed that cytochrome C was successfully isolated and purified by TeW₆ @ZIF-8 composite from porcine heart protein extract, which is further identified with LC-MS/MS. Thus, a new strategy for separating and purifying cytochrome C from the porcine heart using TeW₆ @ZIF-8 composite as an adsorbent was established.

Advances in particulate matter filtration: Materials, performance, and application

Air-borne pollutants in particulate matter (PM) form, produced either physically during industrial processes or certain biological routes, have posed a great threat to human health. Particularly during the current COVID-19 pandemic, effective filtration of the virus is an urgent matter worldwide. In this review, we first introduce some fundamentals about PM, including its source and classification, filtration mechanisms, and evaluation parameters. Advanced filtration materials and their functions are then summarized, among which polymers and MOFs are discussed in detail together with their antibacterial performance. The discussion on the application is divided into end-of-pipe treatment and source control. Finally, we conclude this review with our prospective view on future research in this area.

Electrospun Nanofiber Membranes for Air Filtration: A Review

Nanomaterials for air filtration have been studied by researchers for decades. Owing to the advantages of high porosity, small pore size, and good connectivity, nanofiber membranes prepared by electrospinning technology have been considered as an outstanding air-filter candidate. To satisfy the requirements of material functionalization, electrospinning can provide a simple and efficient one-step process to fabricate the complex structures of functional nanofibers such as core-sheath structures, Janus structures, and other multilayered structures. Additionally, as a nanoparticle carrier, electrospun nanofibers can easily achieve antibacterial properties, flame-retardant properties, and the adsorption properties of volatile gases, etc. These simple and effective approaches have benefited from the significate development of electrospun nanofibers for air-filtration applications. In this review, the research progress on electrospun nanofibers as air filters in recent years is summarized. The fabrication methods, filtration performances, advantages, and disadvantages of single-polymer nanofibers, multipolymer composite nanofibers, and nanoparticle-doped hybrid nanofibers are investigated. Finally, the basic principles of air filtration are concluded upon and prospects for the application of complex-structured nanofibers in the field of air filtration are proposed.

Nanofibrous membranes comprising intrinsically microporous polyimides with embedded metal-organic frameworks for capturing volatile organic compounds

Here, we report the fabrication of nanofibrous air-filtration membranes of intrinsically microporous polyimide with metal-organic frameworks (MOFs). The membranes successfully captured VOCs from air. Two polyimides with surface areas up to 500 m² g^-1 were synthesized, and the impact of the porosity on the sorption kinetics and capacity of the nanofibers were investigated. Two Zr-based MOFs, namely pristine UiO-66 (1071 m² g^-1) and defective UiO-66 (1582 m² g^-1), were embedded into the nanofibers to produce nanocomposite materials. The nanofibers could remove polar formaldehyde and non-polar toluene, xylene, and mesitylene from air. The highest sorption capacity with 214 mg g^-1 was observed for xylene, followed by mesitylene (201 mg g^-1), toluene (142 mg g^-1), and formaldehyde (124 mg g^-1). The incorporation of MOFs drastically improved the sorption performance of the fibers produced from low-surface-area polyimide. Time-dependent sorption tests revealed the rapid sequestration of air pollutants owing to the intrinsic porosity of the polyimides and the MOF fillers. The porosity allowed the rapid diffusion of pollutants into the inner fiber matrix. The molecular level interactions between VOCs and polymer/MOFs were clarified by molecular modeling studies. The practicality of material fabrication and the applicability of the material were assessed through the modification of industrial N95 dust masks. To the best of our knowledge, this is the first successful demonstration of the synergistic combination of intrinsically microporous polyimides and MOFs in the form of electrospun nanofibrous membranes and their application for VOC removal.

Investigations of Cr(VI) removal by millet bran biochar modified with inorganic compounds: Momentous role of additional lactate

In this study, millet bran biochars modified with inorganic compounds (H₃PO₄: P-BC, NaOH: Na-BC and K₂CO₃: K-BC) were prepared and applied for Cr(VI) removal to evaluate the effects of modification on biochars' physicochemical properties. The results showed that Cr(VI) reduction capacity complied with the order of Na-BC > BC > P-BC > K-BC, and reductive groups such as -OH and -NH₂ played considerable roles in electrons donating. Based on this, lactate was added for further investigation of electrons transferring. The results displayed that Cr(VI) removal of all biochars was enhanced tremendously and modified biochars exhibited better Cr(VI) reduction. This may be due to the bridging effect of lactate, which could not only chelate with Cr(VI) via -COOH (or -OH) but also form hydrogen bonds with oxygen or nitrogen containing groups on biochars through the other groups, thus facilitating electrons transferring between biochars and Cr(VI). This work provided an insight into evaluation of the influence of inorganic compounds modification on both electrons donating capability of biochars and electrons transferring potential of biochars combined with lactate in Cr(VI) removal.