1
|
Microplastics contamination in water supply system and treatment processes. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 926:171793. [PMID: 38513854 DOI: 10.1016/j.scitotenv.2024.171793] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/30/2023] [Revised: 03/04/2024] [Accepted: 03/16/2024] [Indexed: 03/23/2024]
Abstract
Due to global demand, millions of tons of plastics have been widely consumed, resulting in the widespread entry of vast amounts of microplastic particles into the environment. The presence of microplastics (MPs) in water supplies, including bottled water, has undergone systematic review, assessing the potential impacts of MPs on humans through exposure assessment. The main challenges associated with current technologies lie in their ability to effectively treat and completely remove MPs from drinking and supply water. While the risks posed by MPs upon entering the human body have not yet been fully revealed, there is a predicted certainty of negative impacts. This review encompasses a range of current technologies, spanning from basic to advanced treatments and varying in scale. However, given the frequent detection of MPs in drinking and bottled water, it becomes imperative to implement comprehensive management strategies to address this issue effectively. Consequently, integrating current technologies with management options such as life-cycle assessment, circular economy principles, and machine learning is crucial to eliminating this pervasive problem.
Collapse
|
2
|
Microplastics in Asian rivers: Geographical distribution, most detected types, and inconsistency in methodologies. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 349:123985. [PMID: 38621450 DOI: 10.1016/j.envpol.2024.123985] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/29/2023] [Revised: 04/11/2024] [Accepted: 04/12/2024] [Indexed: 04/17/2024]
Abstract
Microplastics pose a significant environmental threat, with potential implications for toxic chemical release, aquatic life endangerment, and human food chain contamination. In Asia, rapid economic growth coupled with inadequate waste management has escalated plastic pollution in rivers, positioning them as focal points for environmental concern. Despite Asia's rivers being considered the most polluted with plastics globally, scholarly attention to microplastics in the region's freshwater environments is a recent development. This study undertakes a systematic review of 228 scholarly articles to map microplastic hotspots in Asian freshwater systems and synthesize current research trends within the continent. Findings reveal a concentration of research in China and Japan, primarily investigating riverine and surface waters through net-based sampling methods. Polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) emerge as the predominant microplastic types, frequently observed as fibers or fragments. However, the diversity of sampling methodologies and reporting metrics complicates data synthesis, underscoring the need for standardized analytical frameworks to facilitate comparative analysis. This paper delineates the distribution of microplastic hotspots and outlines the prevailing challenges and prospects in microplastic research within Asian freshwater contexts.
Collapse
|
3
|
Recent advances in microplastic removal from drinking water by coagulation: Removal mechanisms and influencing factors. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 349:123863. [PMID: 38565391 DOI: 10.1016/j.envpol.2024.123863] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/07/2023] [Revised: 02/26/2024] [Accepted: 03/23/2024] [Indexed: 04/04/2024]
Abstract
Microplastics (MPs) are emerging contaminants that are widely detected in drinking water and pose a potential risk to humans. Therefore, the MP removal from drinking water is a critical challenge. Recent studies have shown that MPs can be removed by coagulation. However, the coagulation removal of MPs from drinking water remains inadequately understood. Herein, the efficiency, mechanisms, and influencing factors of coagulation for removing MPs from drinking water are critically reviewed. First, the efficiency of MP removal by coagulation in drinking water treatment plants (DWTPs) and laboratories was comprehensively summarized, which indicated that coagulation plays an important role in MP removal from drinking water. The difference in removal effectiveness between the DWTPs and laboratory was mainly due to variations in treatment conditions and limitations of the detection techniques. Several dominant coagulation mechanisms for removing MPs and their research methods are thoroughly discussed. Charge neutralization is more relevant for small-sized MPs, whereas large-sized MPs are more dependent on adsorption bridging and sweeping. Furthermore, the factors influencing the efficiency of MP removal were jointly analyzed using meta-analysis and a random forest model. The meta-analysis was used to quantify the individual effects of each factor on coagulation removal efficiency by performing subgroup analysis. The random forest model quantified the relative importance of the influencing factors on removal efficiency, the results of which were ordered as follows: MPs shape > Coagulant type > Coagulant dosage > MPs concentration > MPs size > MPs type > pH. Finally, knowledge gaps and potential future directions are proposed. This review assists in the understanding of the coagulation removal of MPs, and provides novel insight into the challenges posed by MPs in drinking water.
Collapse
|
4
|
Microplastics in drinking water: A review on methods, occurrence, sources, and potential risks assessment. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 348:123857. [PMID: 38537794 DOI: 10.1016/j.envpol.2024.123857] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/27/2023] [Revised: 02/16/2024] [Accepted: 03/22/2024] [Indexed: 04/02/2024]
Abstract
Microplastics in drinking water captured widespread attention following reports of widespread detection around the world. Concerns have been raised about the potential adverse effects of microplastics in drinking water on human health. Given the widespread interest in this research topic, there is an urgent need to compile existing data and assess current knowledge. This paper provides a systematic review of studies on microplastics in drinking water, their evidence, key findings, knowledge gaps, and research needs. The data collected show that microplastics are widespread in drinking water, with large variations in reported concentrations. Standardized methodologies of sampling and analysis are urgently needed. There were more fibrous and fragmented microplastics, with the majority being <10 μm in size and composed of polyester, polyethylene, polypropylene, and polystyrene. Little attention has been paid to the color of microplastics. More research is needed to understand the occurrence and transfer of microplastics throughout the water supply chain and the treatment efficiency of drinking water treatment plants (DWTPs). Methods capable of analyzing microplastics <10 μm and nanoplastics are urgently needed. Potential ecological assessment models for microplastics currently in use need to be improved to take into account the complexity and specificity of microplastics.
Collapse
|
5
|
Regulatory Science Perspective on the Analysis of Microplastics and Nanoplastics in Human Food. Anal Chem 2024; 96:4343-4358. [PMID: 38452774 DOI: 10.1021/acs.analchem.3c05408] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/09/2024]
Abstract
Microplastics are increasingly reported, not only in the environment but also in a wide range of food commodities. While studies on microplastics in food abound, the current state of science is limited in its application to regulatory risk assessment by a continued lack of standardized definitions, reference materials, sample collection and preparation procedures, fit-for purpose analytical methods for real-world and environmentally relevant plastic mixtures, and appropriate quality controls. This is particularly the case for nanoplastics. These methodological challenges hinder robust, quantitative exposure assessments of microplastic and nanoplastic mixtures from food consumption. Furthermore, limited toxicological studies on whether microplastics and nanoplastics adversely impact human health are also impeded by methodology challenges. Food safety regulatory agencies must consider both the exposure and the risk of contaminants of emerging concern to ascertain potential harm. Foundational to this effort is access to and application of analytical methods with the capability to quantify and characterize micro- and nanoscale sized polymers in complex food matrices. However, the early stages of method development and application of early stage methods to study the distribution and potential health effects of microplastics and nanoplastics in food have largely been done without consideration of the stringent requirements of methods to inform regulatory activities. We provide regulatory science perspectives on the state of knowledge regarding the occurrence of microplastics and nanoplastics in food and present our general approach for developing, validating, and implementing analytical methods for regulatory purposes.
Collapse
|
6
|
Accumulation characteristics and ecological risk evaluation of microplastics in sediment cores from the artificial reef area and surrounding seas of Haizhou Bay, north China. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 925:171789. [PMID: 38508275 DOI: 10.1016/j.scitotenv.2024.171789] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/29/2023] [Revised: 02/20/2024] [Accepted: 03/16/2024] [Indexed: 03/22/2024]
Abstract
One significant "sink" for microplastic (MP) pollution is the sediments. There's a considerable lack of reliable data regarding the historical status of MPs contamination in sediments within marine ranching. In this research, the study area encompassed Haizhou bay marine ranching and adjacent seas. The primary objective was to explore the potential relationships between the accumulation of MPs and both the sample depth and sediment characteristics within the cores. The results unveiled significant contamination of MPs within the sediment cores. The average MPs concentration of sediment was 1.01 ± 1.28 n/g. Fibrous polymers and particles smaller than 1000 μm were frequently found in the sediment. The abundance of MPs exhibited a tendency to decrease with an increase in sediment depth. Artificial reefs and currents affected on MPs distribution in sediment cores. The accumulation of MPs showed a significant correlation (P < 0.05) with the sediment content of different particle sizes, suggesting that the composition of sediment can serve as an indicator of the abundance of MPs. The risk of MP pollution in the sediments of the study area was assessed by establishing a risk assessment model using concentration data of MPs and polymer types. Due to the higher hazard score of polymers (PA and PET) in MPs, the Polymer hazard index (PHI) was elevated to grade II. However, it had a Pollution load index (PLIzone) value of 1.95 (level I). This suggested that contamination was minimal, yet the ecological risk remained relatively high. The ecological risk assessment of MPs served as the foundation for gaining a detailed understanding of the distribution characteristics of MPs. It also furnished essential data support for conducting a comprehensive assessment, developing feasible management strategies, and establishing water quality standards related to plastic waste.
Collapse
|
7
|
Microplastics as potential barriers to ultraviolet light emitting diode inactivation of MS2 bacteriophage: Influence of water-quality parameters. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 913:169759. [PMID: 38171462 DOI: 10.1016/j.scitotenv.2023.169759] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/27/2023] [Revised: 12/27/2023] [Accepted: 12/27/2023] [Indexed: 01/05/2024]
Abstract
Microplastics have emerged as a concerning contaminant in drinking water sources, potentially interacting with pathogenic microorganisms and affecting the disinfection processes. In this study, MS2 was selected as an alternative for the human enteric virus. The influence of microplastics polyvinylchloride (MPs-PVC) on ultraviolet light emitting diode (UV-LED) inactivation of MS2 was investigated under various water chemistry conditions, such as MPs-PVC concentration, pH, salinity, and humic acid concentration. The results revealed that higher concentrations of MPs-PVC led to the reduced inactivation of MS2 by decreased UV transmittance, hindering the disinfection process. Additionally, the inactivation efficiency of MS2 in the presence of MPs-PVC was influenced by pH, and acidic solution (pH at 4, 5, and 6) exhibited higher efficiency compared to alkaline solution (pH at 8 and 9) and neutral solution (pH at 7). The low Na+ concentrations (0-50 mM) had a noticeable effect on MS2 inaction efficiency in the presence of MPs-PVC, while the addition of Ca2+ posed an insignificant effect due to the preferential interaction with MPs-PVC. Furthermore, the inactivation rate of MS2 initially increased and then decreased with increasing the concentration of humic acid, which was significantly different without MPs-PVC. These findings shed light on the complex interactions between MPs-PVC and MS2 in the UV-LED disinfection process under various water-quality parameters, contributing to drinking water safety and treatment.
Collapse
|
8
|
Rapid sand filtration for <10 μm-sized microplastic removal in tap water treatment: Efficiency and adsorption mechanisms. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 912:169074. [PMID: 38056676 DOI: 10.1016/j.scitotenv.2023.169074] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/15/2023] [Revised: 11/10/2023] [Accepted: 12/01/2023] [Indexed: 12/08/2023]
Abstract
The omnipresence of microplastics (MPs) in potable water has become a major concern due to their potential disruptive effect on human health. Therefore, the effective removal of MPs in drinking water is essential for life preservation. In this study, tap water containing microplastic <10 μm in size was treated using constructed pilot-scale rapid sand filtration (RSF) system to investigate the removal efficiency and the mechanisms involved. The results show that the RSF provides significant capacity for the removal and immobilization of MPs < 10 μm diameter (achieving 98 %). Results showed that silicate sand reacted with MPs through a cooperative assembly process, which mainly involved interception, trapping, entanglement, and adsorption. The MPs were quantified by Flow cytometry instrument. A kinetics study underlined the pivotal role of physio-chemisorption in the removal process. MP particles smaller than absorbents, saturation of adsorbents, and reactor hydrodynamics were identified as limiting factors, which were alleviated by backwashing. Backwashing promoted the desorption of up to 97 % MPs, conducive for adsorbent active site regeneration. These findings revealed the critical role of RSF and the importance of backwashing in removing MPs. Understanding the mechanisms involved in removing microplastics from drinking water is crucial in developing more efficient strategies to eliminate them.
Collapse
|
9
|
Distribution of microplastics in rainfall and their control by a permeable pavement in low-impact development facility. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 351:119710. [PMID: 38061101 DOI: 10.1016/j.jenvman.2023.119710] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/15/2023] [Revised: 11/02/2023] [Accepted: 11/22/2023] [Indexed: 01/14/2024]
Abstract
Microplastics (MPs) released from plastic products in daily life are present in the air and could be transported to freshwater environments along with rain. Recently, low-impact development (LID) facilities, such as permeable pavements, have been used to treat non-point source pollutants, including rainfall runoff. While runoff is treated by LID facilities, the periodic monitoring of MPs in rainfall and the efficiency of removal of MPs through LID facilities have rarely been investigated. Therefore, this case study focused on monitoring MPs in rainwater runoff and permeate from a permeable pavement in Busan, South Korea, thus evaluating the removal efficiency of MPs by a LID system. The initial rainfall runoff and permeate through the LID system were sampled, and the amounts, types, sizes, and shapes of MPs in the samples were analyzed using micro-Fourier Transform Infrared (FTIR) spectroscopy. The results showed that the distribution of MPs in the initial rainfall was affected by population in tested area. Polyethylene was the most common type of MPs in all the samples. Polyamide was only found in the LID samples because of the pollution caused by water flows and pavement materials. Fragment type MPs was most commonly observed and consisted of relatively small-sized (under 100 μm) particles. LID facilities were able to capture approximately 98% of MPs in the rainfall through a filtration process in the permeable pavement.
Collapse
|
10
|
Microalgal-based industry vs. microplastic pollution: Current knowledge and future perspectives. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 909:168414. [PMID: 37963529 DOI: 10.1016/j.scitotenv.2023.168414] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/29/2023] [Revised: 11/05/2023] [Accepted: 11/05/2023] [Indexed: 11/16/2023]
Abstract
Microalgae can play a crucial role in the environment due to their efficient capture of CO2 and their potential as a solution for a carbon-negative economy. Water quality is critical for the success and profitability of microalgal-based industries, and understanding their response to emergent pollutants, such as microplastics (MPs), is essential. Despite the published studies investigating the impact of MPs on microalgae, knowledge in this area remains limited. Most studies have mainly focused on microalgal growth, metabolite analysis, and photosynthetic activity, with significant discrepancies in what is known about the impact on biomass yield. Recent studies show that the yield of biomass production depends on the levels of water contamination by MPs, making it necessary to reduce the contamination levels in the water. However, present technologies for extracting and purifying water from MPs are limited, and further research and technological advancements are required. One promising solution is the use of bio-based polymer materials, such as bacterial cellulose, which offer biodegradability, cost-effectiveness, and environmentally friendly detoxifying properties. This review summarises the current knowledge on MPs pollution and its impact on the viability and proliferation of microalgae-based industries, highlights the need for further research, and discusses the potential of bio-solutions for MPs removal in microalgae-based industries.
Collapse
|
11
|
Microplastics removal technologies from aqueous environments: a systematic review. JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE & ENGINEERING 2023; 21:463-473. [PMID: 37869596 PMCID: PMC10584763 DOI: 10.1007/s40201-023-00872-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/05/2023] [Accepted: 07/04/2023] [Indexed: 10/24/2023]
Abstract
Purpose Pollution of the environment with all kinds of plastics has become a growing problem. The problem of microplastics is mainly due to the absorption of stable organic pollutants and metals into them, and as a result, their environmental toxicity increases. The main purpose of this study is to investigate the appropriate and efficient methods of removing microplastics from aqueous environments through a systematic review. Methods Present study designed according to PRISMA guidelines. Two independent researchers followed all process from search to final analysis, for the relevant studies using international databases of PubMed, Scopus and ISI/WOS (Web of Science), without time limit. The search strategy developed based on the main axis of "microplastics", "aqueous environments" and "removal". This research was carried out from 2017 until the March of 2022. All relevant observational, analytical studies, review articles, and a meta-analysis were included. Results Through a comprehensive systematic search we found 2974 papers, after running the proses of refining, 80 eligible papers included to the study. According to the results of the review, the methods of removing microplastics from aquatic environments were divided to physical (12), chemical (18), physicochemical (27), biological (12) and integrated (11) methods. In different removal methods, the most dominant group of studied microplastics belonged to the four groups of polyethylene (PE), polystyrene (PS), polypropylene (PP) and polyethylene tetra phthalate (PET). Average removal efficiency of microplastics in different processes in each method was as: physical method (73.76%), chemical method (74.38%), physicochemical method (80.44%), biological method (75.23%) and integrated method (88.63%). The highest removal efficiency occurred in the processes based on the integrated method and the lowest efficiency occurred in the physical method. In total, 80% of the studies were conducted on a laboratory scale, 18.75% on a full scale and 1.25% on a pilot scale. Conclusion According to the findings; different processes based on physical, chemical, physicochemical, biological and integrated methods are able to remove microplastics with high efficiency from aqueous environments and in order to reduce their hazardous effects on health and environment, these processes can be easily used.
Collapse
|
12
|
A standard analytical approach and establishing criteria for microplastic concentrations in wastewater, drinking water and tap water. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 899:165356. [PMID: 37422236 DOI: 10.1016/j.scitotenv.2023.165356] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/30/2023] [Revised: 07/04/2023] [Accepted: 07/04/2023] [Indexed: 07/10/2023]
Abstract
The ubiquitous presence of microplastics (MPs) in natural water bodies reflects the global issue regarding these micropollutants. The main problem of MPs lies on the difficulty of removing these particles from water during wastewater and drinking water treatments. The release of MPs to the environment in treated wastewater contributed to the dispersion of these micropollutants, which enhances the harmful effect of MPs on fauna and flora. In addition, their presence in tap water entails a potential risk to human health since MPs can be directly consumed. The first step is being able to quantify and characterise these microparticles accurately. In this work, a comprehensive analysis on the presence of MPs in wastewater, drinking water and tap water has been conducted with emphasis on sampling methods, pre-treatment, MP size and analytical methods. Based on literature data, a standard experimental procedure has been proposed with the objective of recommending a methodology that allows the homogenisation of MP analysis in water samples. Finally, reported MP concentrations for influents and effluents of drinking and wastewater treatment plants and tap water have been analysed, in terms of abundance, ranges and average values, and a tentative classification of different waters based on their MP concentrations is proposed.
Collapse
|
13
|
Process analysis of microplastic aging during the photochemical oxidation process and its effect on the adsorption behavior of dissolved organic matter. CHEMOSPHERE 2023; 341:139980. [PMID: 37648171 DOI: 10.1016/j.chemosphere.2023.139980] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/15/2023] [Revised: 08/16/2023] [Accepted: 08/25/2023] [Indexed: 09/01/2023]
Abstract
Information on microplastics (MPs) interactions with dissolved organic matter (DOM) is essential for understanding their environmental impacts. However, research is scarce regarding the adsorption behavior of DOM with different characteristics onto pristine and aged MPs. This research thus investigates MPs aging behavior accelerated by UV/Persulfate and UV/chlorine oxidation processes and the adsorption behavior of organic matter with low-specific ultraviolet absorbance (L-SUVA) and high-SUVA (H-SUVA) characteristics. MPs were degraded by UV/Cl and UV/Persulfate for 30 days. Changes in thermal properties, surface morphology, and chemistry were studied using different analytical techniques. The adsorption behavior was assessed by adsorption kinetic and isotherm study. After oxidation, the surface of the MPs showed a significant increase in the oxygen-containing functional groups, contact angle, surface roughness, and surface energy, and a decrease in crystallinity. The oxidation effect follows the order of UV/Cl > UV/Persulfate. The kinetic and equilibrium data of H-SUVA adsorption on pristine and aged MPs well-fitted the pseudo-second-order and Langmuir model. In contrast, L-SUVA well-fitted the pseudo-first-order and Freundlich model. The adsorption capacity (qm) increased in the following orders: 8.11 > 5.87>4.29 mg g-1 for H-SUVA and 19.81 > 6.662>5.315 mg g-1 for L-SUVA by MPs aged with UV/Cl, UV/Persulfate and pristine MPs, respectively. The larger the surface damage of MPs, the greater the adsorption affinity of DOM. The result was attributed to the physical adsorption process, hydrophobic interactions, electrostatic, hydrogen, and halogen bonding. These findings are beneficial to provide new insights involving the adsorption behavior and interaction mechanisms of DOM onto MPs for the environmental risk assessment.
Collapse
|
14
|
Ameliorative effect of natural floating island as fish aggregating devices on heavy metals distribution in a freshwater wetland. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 336:122428. [PMID: 37611791 DOI: 10.1016/j.envpol.2023.122428] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/18/2023] [Revised: 08/18/2023] [Accepted: 08/19/2023] [Indexed: 08/25/2023]
Abstract
Growing human population and climate change are leading reasons for water quality deterioration globally; and ecologically important waterbodies including freshwater wetlands are in a vulnerable state due to increasing concentrations of pollutants like heavy metals. Given the declining health of these valuable resources, the present study was conducted to evaluate the effect of natural floating island in the form of fish aggregating devices (FADs) made of native weed mass on the distribution of heavy metals in the abiotic and bio compartments of a freshwater wetland. Lower concentrations of surface water heavy metals were observed inside the FADs with a reduction of 73.91%, 65.22% and 40.57-49.16% for Cd, Pb and other metals (viz. Co, Cr, Cu, Ni and Zn), respectively as compared to outside FAD. These led to 14.72-55.39% reduction in the heavy metal pollution indices inside the FAD surface water. The fish species inside the FADs were also found less contaminated (24.07-25.07% reduction) with lower health risk indices. The study signifies the valuable contribution of natural floating island as FADs in ameliorating the effect of heavy metals pollution emphasizing the tremendous role of the natural floating islands in sustainable maintenance of freshwater wetlands for better human health and livelihood.
Collapse
|
15
|
Tracing microplastics in rural drinking water in Chongqing, China: Their presence and pathways from source to tap. JOURNAL OF HAZARDOUS MATERIALS 2023; 459:132206. [PMID: 37543018 DOI: 10.1016/j.jhazmat.2023.132206] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/05/2023] [Revised: 07/21/2023] [Accepted: 07/31/2023] [Indexed: 08/07/2023]
Abstract
Despite the significant attention given to microplastics in urban areas, our understanding of microplastics in rural drinking water systems is still limited. To address this knowledge gap, we investigated the presence and pathways of microplastics in rural drinking water system, including reservoir, water treatment plant (WTP), and tap water of end-users. The results showed that the treatment processes in the WTP, including coagulation-sedimentation, sand-granular active carbon filtration, and ultrafiltration, completely removed microplastics from the influent. However, the microplastic abundance increased during pipe transport from WTP to residents' homes, resulting in the presence of 1.4 particles/L of microplastics in tap water. This microplastic increase was also observed during the transportation from the reservoir to the WTP, suggesting that the plastic pipe network is a key source of microplastics in the drinking water system. The main types of polymers were PET, PP, and PE, and plastic breakdown, atmospheric deposition, and surface runoff were considered as their potential sources. Furthermore, this study estimated that rural residents could ingest up to 1034 microplastics annually by drinking 2 L of tap water every day. Overall, these findings provide essential data and preliminary insights into the fate of microplastics in rural drinking water systems.
Collapse
|
16
|
Bioaccumulation of polystyrene microplastics and changes in antioxidant and AChE pattern in a freshwater snail (Filopaludina bengalensis) from river Ganga. AQUATIC TOXICOLOGY (AMSTERDAM, NETHERLANDS) 2023; 263:106697. [PMID: 37774668 DOI: 10.1016/j.aquatox.2023.106697] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/15/2023] [Revised: 09/02/2023] [Accepted: 09/13/2023] [Indexed: 10/01/2023]
Abstract
Microplastic pollution is a leading global problem affecting terrestrial and marine aquatic ecosystems. Due to the stagnant nature of microplastics, the toxic effect of microplastics is more pronounced to benthic organisms than the surface feeder. Hence, the present study effort was to study the microplastic bioaccumulation pattern and changes in the enzymatic and nonenzymatic antioxidant and AChE pattern of freshwater snail Filopaludina bengalensis, which were subjected to 0.5 ppm to 5 ppm levels of polystyrene microsphere (∼ 30 µm) for 27 days. The study showed that microplastics were easily accumulated in the test organism in a dose and time-dependent manner, amounting to 82 ± 6.02 particles /individuals at a 5 ppm dose on the 27th day. However, no mortality was observed at the test microplastic dosages. The enzymatic antioxidant profile (SOD and catalase) showed limited variability and remained stable with increased duration and microplastic dose. However, the nonenzymatic antioxidant profile showed distinct variability with the complete seizing of the DPPH activity on the 27th day at 5 ppm microplastic dose and a gradual decrease of ABTS and FRAP activity at all the dose ranges. Even the AChE activity decreased with higher exposure concentrations. The present study for the first time shows the direct impact of microplastics on a freshwater snail widely available in the Indian subcontinent, indicating the role of microplastic pollution will create havoc in the Ganga river eco-biosystem in the long run.
Collapse
|
17
|
Microplastics removal from aqueous environment by metal organic frameworks. BMC Chem 2023; 17:122. [PMID: 37735691 PMCID: PMC10514943 DOI: 10.1186/s13065-023-01032-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/11/2023] [Accepted: 09/05/2023] [Indexed: 09/23/2023] Open
Abstract
This paper provides an overview of recent research performed on the applications of metal-organic frameworks (MOFs) for microplastics (MPs) removal from aqueous environments. MPs pollution has become a major environmental concern due to its negative impacts on aquatic ecosystems and human health. Therefore, developing effective and sustainable methods for removing them from aqueous environments is crucial. In recent years, MOFs have emerged as a promising solution for this purpose due to their unique properties such as high surface area, renewability, chemical stability, and versatility. Moreover, their specific properties such as their pore size and chemical composition can be tailored to enhance their efficiency in removing MPs. It has been shown that MOFs can effectively adsorb MPs from aqueous media in the range of 70-99.9%. Besides some high price concerns, the main drawback of using MOFs is their powder form which can pose challenges due to their instability. This can be addressed by supporting MOFs on other substrates such as aerogels or foams. Meanwhile, there is a need for more research to investigate the long-term stability of MOFs in aqueous environments and developing efficient regeneration methods for their repeated use.
Collapse
|
18
|
Contamination and removal efficiency of microplastics and synthetic fibres in a conventional drinking water treatment plant in Geneva, Switzerland. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 880:163270. [PMID: 37023809 DOI: 10.1016/j.scitotenv.2023.163270] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/01/2023] [Revised: 03/23/2023] [Accepted: 03/31/2023] [Indexed: 05/27/2023]
Abstract
Although it is known that freshwater resources are contaminated with microplastics (MPs), still limited information is known about the efficiency of large drinking water treatment plants (DWTP) to remove microplastics. Moreover, reported concentrations of MPs in drinking water variates from some units to thousands of units per litre and the sampling volumes used for MPs analysis are generally heterogeneous and limited. The present study evaluates the removal of MPs and synthetic fibres in the main DWTP of Geneva, Switzerland, by considering large sampling volumes at different time intervals. Furthermore, contrary to other studies, this DWTP does not count with a clarification process before sand filtration and coagulated water is sent directly to sand filtration. In this study a distinction is made between microplastics as fragments, films, pellets, and synthetic fibres. Raw water and effluents of each filtering mass (sand and activated carbon filtration) are analysed for the presence of MPs and synthetic fibres with sizes ≥63 μm using infrared spectroscopy. Concentrations of MPs in raw water range from 25.7 to 55.6 MPs/m3 and in treated water from 0 to 4 MPs/m3, respectively. Results show that 70 % of MPs are retained during sand filtration and total removal is equal to 97 % in treated water after activated carbon filtration. Concentration of identified synthetic fibres is low (average value of 2 synthetic fibres/m3) and constant in all steps of water treatment. Chemical composition of microplastics and synthetic fibres is found more heterogeneous in raw water than after sand filtration and activated carbon filtration, indicating the persistence of some types of plastics (like polyethylene and polyethylene terephthalate) in water treatment processes. Heterogeneities in MP concentrations are observed from one sampling campaign to another, indicating significant variations of MP concentrations in raw water.
Collapse
|
19
|
A review of microplastic removal from water and wastewater by membrane technologies. WATER SCIENCE AND TECHNOLOGY : A JOURNAL OF THE INTERNATIONAL ASSOCIATION ON WATER POLLUTION RESEARCH 2023; 88:199-219. [PMID: 37452543 PMCID: wst_2023_186 DOI: 10.2166/wst.2023.186] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/18/2023]
Abstract
Microplastics (MPs) cannot be completely removed from water/wastewater in conventional wastewater treatment plants (WWTPs) and drinking water treatment plants (DWTPs). According to the literature analysis, membrane technologies, one of the advanced treatment technologies, are the most effective and promising technologies for MP removal from water and wastewater. In this paper, firstly, the properties of MPs commonly present in WWTPs/DWTPs and the MP removal efficiency of WWTPs/DWTPs are briefly reviewed. In addition, research studies on MP removal from water/wastewater by microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), reverse osmosis (RO), and membrane bioreactors (MBRs) are reviewed. In the next section, membrane filtration is compared with other methods used for MP removal from water/wastewater, and the advantages/disadvantages of the removal methods are discussed. Moreover, the problem of membrane fouling with MPs during filtration and the potential for MP release from polymeric membrane structure to water/wastewater are discussed. Finally, based on the studies in the literature, the current status and research deficiencies of MP removal by membrane technologies are identified, and recommendations are made for further studies.
Collapse
|
20
|
Source, occurrence, distribution, fate, and implications of microplastic pollutants in freshwater on environment: A critical review and way forward. CHEMOSPHERE 2023; 325:138367. [PMID: 36907482 DOI: 10.1016/j.chemosphere.2023.138367] [Citation(s) in RCA: 16] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/30/2022] [Revised: 02/15/2023] [Accepted: 03/08/2023] [Indexed: 06/18/2023]
Abstract
The generation of microplastics (MPs) has increased recently and become an emerging issue globally. Due to their long-term durability and capability of traveling between different habitats in air, water, and soil, MPs presence in freshwater ecosystem threatens the environment with respect to its quality, biotic life, and sustainability. Although many previous works have been undertaken on the MPs pollution in the marine system recently, none of the study has covered the scope of MPs pollution in the freshwater. To consolidate scattered knowledge in the literature body into one place, this work identifies the sources, fate, occurrence, transport pathways, and distribution of MPs pollution in the aquatic system with respect to their impacts on biotic life, degradation, and detection techniques. This article also discusses the environmental implications of MPs pollution in the freshwater ecosystems. Certain techniques for identifying MPs and their limitations in applications are presented. Through a literature survey of over 276 published articles (2000-2023), this study presents an overview of solutions to the MP pollution, while identifying research gaps in the body of knowledge for further work. It is conclusive from this review that the MPs exist in the freshwater due to an improper littering of plastic waste and its degradation into smaller particles. Approximately 15-51 trillion MP particles have accumulated in the oceans with their weight ranging between 93,000 and 236,000 metric ton (Mt), while about 19-23 Mt of plastic waste was released into rivers in 2016, which was projected to increase up to 53 Mt by 2030. A subsequent degradation of MPs in the aquatic environment results in the generation of NPs with size ranging from 1 to 1000 nm. It is expected that this work facilitates stakeholders to understand the multi-aspects of MPs pollution in the freshwater and recommends policy actions to implement sustainable solutions to this environmental problem.
Collapse
|
21
|
Microplastics as emergent contaminants in landfill leachate: Source, potential impact and remediation technologies. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2023; 343:118240. [PMID: 37235990 DOI: 10.1016/j.jenvman.2023.118240] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/03/2023] [Revised: 05/19/2023] [Accepted: 05/21/2023] [Indexed: 05/28/2023]
Abstract
A significant amount of plastic waste is generated each year on a global scale, in which the maximum quantity of plastic waste is typically dumped in landfills in various parts of the world. Moreover, dumping plastic waste in landfills cannot address the issue of proper disposal; it simply delays the process. Exploiting waste resources entails environmental hazards because plastic wastes buried in landfills gradually break down into Microplastics (MPs) due to physical, chemical, and biological effects. The possibility of landfill leachate as a source of MPs in the environment has not received much attention. Without systematic treatment, MPs in leachate increase the risk to human health and environmental health since they contain dangerous and toxic pollutants and antibiotic resistance genes transmitted by leachate vectors. Due to their severe environmental risks, MPs are now widely recognized as emerging pollutants. Therefore, the composition of MPs in landfill leachate and the interaction of MPs with other hazardous contaminants are summarised in this review. The available potential mitigation or treatment methods of MPs in landfill leachate as of now, along with the drawbacks and challenges of the present leachate treatment for eliminating MPs, are described in this review. Since it is unclear how MPs will be removed from the current leachate facilities, it is crucial to develop innovative treatment facilities as quickly as possible. Finally, the areas that require more research to provide complete solutions to the persistent problem of plastic debris are discussed.
Collapse
|
22
|
Insights into Anthropogenic Micro- and Nanoplastic Accumulation in Drinking Water Sources and Their Potential Effects on Human Health. Polymers (Basel) 2023; 15:polym15112425. [PMID: 37299225 DOI: 10.3390/polym15112425] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/15/2023] [Revised: 05/13/2023] [Accepted: 05/19/2023] [Indexed: 06/12/2023] Open
Abstract
Anthropogenic microplastics (MPs) and nanoplastics (NPs) are ubiquitous pollutants found in aquatic, food, soil and air environments. Recently, drinking water for human consumption has been considered a significant pathway for ingestion of such plastic pollutants. Most of the analytical methods developed for detection and identification of MPs have been established for particles with sizes > 10 μm, but new analytical approaches are required to identify NPs below 1 μm. This review aims to evaluate the most recent information on the release of MPs and NPs in water sources intended for human consumption, specifically tap water and commercial bottled water. The potential effects on human health of dermal exposure, inhalation, and ingestion of these particles were examined. Emerging technologies used to remove MPs and/or NPs from drinking water sources and their advantages and limitations were also assessed. The main findings showed that the MPs with sizes > 10 μm were completely removed from drinking water treatment plants (DWTPs). The smallest NP identified using pyrolysis-gas chromatography-mass spectrometry (Pyr-GC/MS) had a diameter of 58 nm. Contamination with MPs/NPs can occur during the distribution of tap water to consumers, as well as when opening and closing screw caps of bottled water or when using recycled plastic or glass bottles for drinking water. In conclusion, this comprehensive study emphasizes the importance of a unified approach to detect MPs and NPs in drinking water, as well as raising the awareness of regulators, policymakers and the public about the impact of these pollutants, which pose a human health risk.
Collapse
|
23
|
Abundance and characteristics of microplastics in drinking water treatment plants, distribution systems, water from refill kiosks, tap waters and bottled waters. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 884:163866. [PMID: 37142004 DOI: 10.1016/j.scitotenv.2023.163866] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/17/2023] [Revised: 04/25/2023] [Accepted: 04/27/2023] [Indexed: 05/06/2023]
Abstract
Limited research studies have revealed the presence of microplastics (MPs) of different polymer types, shapes, and sizes in drinking water sources, influents of drinking water treatment plants (DWTPs), effluents of DWTPs, tap water, and bottled water. Reviewing the available information on MP pollution in waters, which is becoming more worrying in correlation with the increasing plastic production in the world every year, is noteworthy for understanding the current situation, identifying the deficiencies in the studies, and taking the necessary measures for public health as soon as possible. Therefore, this paper, in which the abundance, characteristics, and removal efficiencies of MPs in the processes from raw water to tap water and/or bottled water are reviewed is a guide for dealing with MP pollution in drinking water. In this paper, firstly, the sources of MPs in raw waters are briefly reviewed. In addition, the abundance, and characteristics (polymer type, shape, and size) of MPs in influents and effluents of DWTPs in different countries are reviewed and the effects of treatment stages (coagulation, flocculation, sedimentation, sand filtration, disinfection, and membrane filtration) of DWTPs on MP removal efficiency and the factors that are effective in removal are discussed. Moreover, studies on the factors affecting MP release from drinking water distribution systems (DWDSs) to treated water and the abundance and characteristics of MPs in tap water, bottled water and water from refill kiosks are reviewed. Finally, the deficiencies in the studies dealing with MPs in drinking water were identified and recommendations for future studies are presented.
Collapse
|
24
|
Complementary Analysis for Undetectable Microplastics from Contact Lenses to Aquatic Environments via Fourier Transform Infrared Spectroscopy. Molecules 2023; 28:molecules28093713. [PMID: 37175123 PMCID: PMC10179804 DOI: 10.3390/molecules28093713] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/03/2023] [Revised: 04/18/2023] [Accepted: 04/19/2023] [Indexed: 05/15/2023] Open
Abstract
Although microplastics (MPs) are intrinsically toxic and function as vectors for organic micropollutants, their discharge from wastewater treatment plant effluents and human activity remains unknown owing to the limitations of detection and treatment technologies. It is imperative to quantify MPs from human activities involving the consumption of various plastic products. This study warns that contact lenses can generate MPs and nanoplastics (NPs) after being discharged into aquatic environments. Identification via micro-Fourier transform infrared spectroscopy revealed that the fragmented particles (from a few tens to a few hundred micrometres) could not be detected as poly(2-hydroxyl methacrylate), the component of contact lenses, owing to changes in its chemical properties. After the degradation process, the median size of the contact lens particles decreased from 313 to 85 µm. Approximately 300,600 g of contact lens waste is discharged into sewage systems daily in the United States of America (USA), where 45 million people wear contact lenses and throw away one-fifth of them every day. Contact lens waste (1 g) has the potential to release 5653.3-17,773.3 particles of MPs. This implies that the currently reported MP amounts in the environmental matrix exclude significant amounts of MPs and NPs from discharged contact lenses. The identification method should be examined, and a registration of the disposal process should be established.
Collapse
|
25
|
Stability of arsenic(Ⅲ, Ⅴ) in galvanized steel pipe scales coexisting with colloidal polystyrene microplastics under drinking water conditions. CHEMOSPHERE 2023; 330:138762. [PMID: 37088206 DOI: 10.1016/j.chemosphere.2023.138762] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/22/2023] [Revised: 04/11/2023] [Accepted: 04/21/2023] [Indexed: 05/03/2023]
Abstract
The stability of metalloid arsenic (As(Ⅲ)) and As(V) in corrosion scales of drinking water distribution systems (DWDS) is closely related to drinking water safety. The effects of colloidal microplastics entering the DWDS on the stability of As(Ⅲ) and As(V) have not been understood. This study investigated the migration and transformation behaviors of As (Ⅲ) and As(V) in the galvanized steel pipe scales employing speciation simulation and sequential extraction methods. The stability of As(Ⅲ) and As(V) in the pipe scales coexisting with colloidal polystyrene microplastics (CPMPs) under drinking water conditions was studied for the first time from the release behaviors and form distributions. Finally, the optimum water quality conditions for As(Ⅲ) and As(V) fixation were summarized. The existing forms of As(Ⅲ) and As(V) under different pH conditions, the competitive action of anions, and the hydrolysis of cations all would significantly affect the stability of As(Ⅲ) and As(V). Sequential extraction method results revealed that the content of As fractions increased in different forms after the pipe scales adsorbed As(Ⅲ) and As(V). The contents of As and iron (Fe) in the form of residual fractions increased in the presence of CPMPs. The effect of three cations on the stability of As(Ⅲ) and As(V) was Fe3+ > Zn2+ > Ca2+. Neutral to weak alkalescence, proper Cl- and cation concentrations were conducive to the fixation of As in DWDS. Notably, the presence of CPMPs could increase the stability of As(Ⅲ) and As(V) in corrosion scales, thus reducing the risk of metalloid As release in DWDS.
Collapse
|
26
|
Occurrence of microplastics in tap and bottled water, and food packaging: A narrative review on current knowledge. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 865:161274. [PMID: 36587673 DOI: 10.1016/j.scitotenv.2022.161274] [Citation(s) in RCA: 29] [Impact Index Per Article: 29.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/02/2022] [Revised: 12/08/2022] [Accepted: 12/26/2022] [Indexed: 06/17/2023]
Abstract
Nowadays, microplastic has been detected in many environmental samples, including aquatic and terrestrial environments. However, few studies recently have addressed their attention to microplastic contamination in different drinking sources and food packages. This review paper has narrated those few findings in brief. Literature showed that different pieces of microplastic fragments, e.g., polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polyvinyl chloride (PVC), polyethylene (PE), high-density polyethylene (HDPE), low-density polyethylene (LDPE), etc. are detected in plastic drinking bottle, tap water, and food packaging containers. Microplastic fragmentation may be associated with mechanical stress, UV radiation, low plastic material quality, aging factor, and atmospheric deposition. Besides these, microplastic is a hub of different chemical compounds and can also retain other complex materials from the surroundings. This makes the microplastic contamination even more complicated and difficult to detect them accurately in a single method. Additionally, one of the common practices at the community level is the long-time repeated usage of plastic drinking bottles and food boxes that subsequently cause microplastic leaching and potential health threats to consumers. This narrative study summarizes the current scenario of microplastic contamination from drinking bottles and food containers and emphasizes doing more quality research in this subtle but highly imposed field to understand potential exposure better.
Collapse
|
27
|
Short-Term Microplastic Exposure Impairs Cognition in Hermit Crabs. Animals (Basel) 2023; 13:ani13061055. [PMID: 36978596 PMCID: PMC10044271 DOI: 10.3390/ani13061055] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/11/2023] [Revised: 02/23/2023] [Accepted: 03/10/2023] [Indexed: 03/17/2023] Open
Abstract
We tested whether acute microplastic exposure impacts information gathering and processing (cognition) in hermit crabs (Pagurus bernhardus). For five days, we kept 51 hermit crabs in tanks containing either polyethylene microspheres (n = 27) or no plastic (n = 24). We then transferred individuals into an intermediate-quality shell and presented them with two vials containing either a better or worse shell. Because touching both shell vials required an equivalent behavioural response, this design controlled for general activity. Plastic-exposed hermit crabs were less likely and slower than controls to touch the better shell vial, instead preferring the worse shell vial. Microplastics, therefore, impaired assessments and decision-making, providing direct evidence of acute microplastic exposure disrupting hermit crab cognition.
Collapse
|
28
|
Distribution and removal mechanism of microplastics in urban wastewater plants systems via different processes. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 320:121076. [PMID: 36641065 DOI: 10.1016/j.envpol.2023.121076] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/09/2022] [Revised: 12/30/2022] [Accepted: 01/10/2023] [Indexed: 06/17/2023]
Abstract
Microplastic pollution threatens water systems worldwide. As one of the most important parts of city wastewater treatment, wastewater treatment plants are not only microplastics interception barriers but also emission sources. Water samples were collected from each sewage treatment plant stage and sludge from the sludge dewatering room. Microplastics were extracted using wet peroxide oxidation and flotation, and the abundance, size, shape, and polymer type of microplastics were detected. Basis on the results, the influence of each process on the removal rate and characteristics of microplastics under the same influent source was analysed. The influent microplastic concentration in this study was 32.5 ± 1.0 n/L, which rapidly decreased after treatment. The removal rates of the sequencing batch reactor activated sludge, cyclic activated sludge, and anaerobic anoxic oxic technologies were 73.0%, 75.6%, and 83.9%, respectively. Most microplastics were transported to the sludge, and the concentration of microplastics in dehydrated sludge was 27.2 ± 3.1 n/g. Microplastics removal occurred primarily during the primary and secondary stages. Disposal processes, settling time, and process design affected wastewater treatment plant microplastic removal rates at each stage. Significant differences in microplastic characteristics were observed at each stage, with the most abundant being fragment shaped, particle sizes of 30-100 μm, and black in colour. Sixteen polymer types were identified using a Raman spectrometer. The predominant polymers are polypropylene, polyethylene, and polyethylene terephthalate. This study demonstrates that optimising the process design of existing wastewater treatment plants is crucial for the prevention and control of microplastic pollution. It is suggested that the process settings of contemporary wastewater treatment plants should be studied in depth to develop a scientific foundation for avoiding and managing microplastic pollution in urban areas.
Collapse
|
29
|
Insights into the removal of microplastics and microfibres by Advanced Oxidation Processes. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 861:160665. [PMID: 36473655 DOI: 10.1016/j.scitotenv.2022.160665] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/04/2022] [Revised: 11/22/2022] [Accepted: 11/29/2022] [Indexed: 06/17/2023]
Abstract
Water treatment plants' effluents are hotspots of microplastics (MPs) and microfibres (MFs) released into the aquatic environment because they were not designed to capture these particles. Special attention should be given to MFs, since they mainly come from laundry and are related to one of the main MP shapes detected in water and wastewater treatment plants. In this sense, Advanced Oxidation Processes (AOPs) could be a feasible solution for tackling MP and MF pollution, however, it is still premature to extract conclusions due to the limited number of studies on the degradation of these particles (specifically MFs) using AOPs. This review addresses the impacts of AOPs on MPs/MFs, focusing on their degradation efficiency, toxicity, and sustainability of the processes, among other aspects. The review points out that polyamide MFs can achieve mass loss >90% by photocatalytic system using TiO2. Also, the low oxidation of MPs (<30 %) by conventional Fenton process affects mainly the surface of the MPs. However, other Fenton-based processes can provide better removal of some types of MPs, mainly using temperatures >100 °C, reaction time ≥ 5 h, and initial pH ≤ 3, achieving MP weight loss up to 96 %. Despite these results, better operating conditions are still required for AOPs since the ones reported so far are not feasible for full-scale application. Additionally, ozonation in treatment plants has increased the fragmentation of MPs (including MFs), leading to a new generation of MPs. More attention is needed on toxicity effects of intermediates and methods of analysis employed for the analysis of MPs/MFs in wastewater effluent should be standardized so that studies can be compared effectively. Future research should focus on the sustainability of the AOP for MP removal in water treatment (power consumption, chemicals consumed and operational costs) for a better understanding of full-scale applicability of AOP adapted to MP treatment.
Collapse
|
30
|
Transformation of microplastics by oxidative water and wastewater treatment processes: A critical review. JOURNAL OF HAZARDOUS MATERIALS 2023; 443:130313. [PMID: 36372022 DOI: 10.1016/j.jhazmat.2022.130313] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/07/2022] [Revised: 10/29/2022] [Accepted: 11/01/2022] [Indexed: 06/16/2023]
Abstract
Microplastics (MPs) are contaminants of emerging concern that accumulate in various environments, where they pose threats to both the ecosystem and public health. Since MPs have been detected in drinking water resources and wastewater effluents, more efficient treatment is needed at wastewater treatment plants (WWTPs) and drinking water treatment plants (DWTPs). This review discusses the potential of biological, photochemical, Fenton (-like) systems, ozonation, and other oxidation processes in the treatment of MPs in terms of their indicators of oxidation such as mass loss and surface oxidation. The oxidation processes were further analyzed in terms of limitations and environmental implications. Most previous studies examining MPs degradation using conventional treatments-such as UV disinfection, ozonation, and chlorination-employed significantly higher doses than the common doses applied in DWTPs and WWTPs. Owing to such dose gaps, the oxidative transformation of MPs observed in many previous studies are not likely to occur under practical conditions. Some novel oxidation processes showed promising MPs treatment efficiencies, while many of them have not yet been applied on a larger scale due to high costs and the lack of extensive basic research. Health and environmental impacts related to the discharge of oxidized MPs in effluents should be considered carefully in different aspects: the role as vectors of external pollutants, release of organic compounds (including organic byproducts from oxidation) and fragmentation into smaller particles as MPs circulate in the ecosystem as well as the possibility of bioaccumulation. Future research should also focus on ways to incorporate developed oxidation processes in DWTPs and WWTPs to mitigate MPs contamination.
Collapse
|
31
|
Microplastics toxicity, detection, and removal from water/wastewater. MARINE POLLUTION BULLETIN 2023; 187:114546. [PMID: 36640497 DOI: 10.1016/j.marpolbul.2022.114546] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/11/2022] [Revised: 12/24/2022] [Accepted: 12/27/2022] [Indexed: 06/17/2023]
Abstract
The world has witnessed massive and preeminent microplastics (MPs) pollution in water bodies due to the inevitable continuous production of plastics for various advantageous chemical and mechanical features. Plastic pollution, particularly contamination by MPs (plastic particles having a diameter lesser than 5 mm), has been a rising environmental concern in recent years due to the inappropriate disposal of plastic trash. This study presents the recent advancements in different technologies for MPs removal in order to gain proper insight into their strengths and weaknesses, thereby orchestrating the preparation for innovation in the field. The production, origin, and global complexity of MPs were discussed. This study also reveals MPs' mode of transportation, its feedstock polymers, toxicities, detection techniques, and the conventional removal strategies of MPs from contaminated systems. Modification of conventional methods vis-à-vis new materials/techniques and other emerging technologies, such as magnetic extraction and sol-gel technique with detailed mechanistic information for the removal of MPs are presented in this study. Conclusively, some future research outlooks for advancing the MPs removal technologies/materials for practical realization are highlighted.
Collapse
|
32
|
Removing microplastics from aquatic environments: A critical review. ENVIRONMENTAL SCIENCE AND ECOTECHNOLOGY 2023; 13:100222. [PMID: 36483746 PMCID: PMC9722483 DOI: 10.1016/j.ese.2022.100222] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/24/2022] [Revised: 11/03/2022] [Accepted: 11/06/2022] [Indexed: 05/13/2023]
Abstract
As one of the typical emerging contaminants, microplastics exist widely in the environment because of their small size and recalcitrance, which has caused various ecological problems. This paper summarizes current adsorption and removal technologies of microplastics in typical aquatic environments, including natural freshwater, marine, drinking water treatment plants (DWTPs), and wastewater treatment plants (WWTPs), and includes abiotic and biotic degradation technologies as one of the removal technologies. Recently, numerous studies have shown that enrichment technologies have been widely used to remove microplastics in natural freshwater environments, DWTPs, and WWTPs. Efficient removal of microplastics via WWTPs is critical to reduce the release to the natural environment as a key connection point to prevent the transfer of microplastics from society to natural water systems. Photocatalytic technology has outstanding pre-degradation effects on microplastics, and the isolated microbial strains or enriched communities can degrade up to 50% or more of pre-processed microplastics. Thus, more research focusing on microplastic degradation could be carried out by combining physical and chemical pretreatment with subsequent microbial biodegradation. In addition, the current recovery technologies of microplastics are introduced in this review. This is incredibly challenging because of the small size and dispersibility of microplastics, and the related technologies still need further development. This paper will provide theoretical support and advice for preventing and controlling the ecological risks mediated by microplastics in the aquatic environment and share recommendations for future research on the removal and recovery of microplastics in various aquatic environments, including natural aquatic environments, DWTPs, and WWTPs.
Collapse
|
33
|
Enhanced Adsorption of Bromoform onto Microplastic Polyethylene Terephthalate Exposed to Ozonation and Chlorination. Molecules 2022; 28:molecules28010259. [PMID: 36615452 PMCID: PMC9821972 DOI: 10.3390/molecules28010259] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/22/2022] [Revised: 12/21/2022] [Accepted: 12/23/2022] [Indexed: 12/31/2022] Open
Abstract
This paper selected microplastic polyethylene terephthalate (PET), commonly found in water/wastewater plant effluent, to investigate the changes of PET oxidized under ozonation (designated as ozonized PET), followed by sodium hypochlorite oxidation (designated as ozonized-chlorinated PET) and studied their influence on the adsorption of the disinfection by-product bromoform (TBM). Fragmentation and cracks appeared on the oxidized PET surface. As the oxidation degree increased, the contact angle decreased from 137° to 128.90° and 128.50°, suggesting hydrophilicity was enhanced. FTIR and XPS analyses suggested that carbonyl groups increased on the surface of ozonized PET and ozonized-chlorinated PET, while the formation of intermolecular halogen bonds was possible when PET experienced dual oxidation. These physiochemical changes enhanced the adsorption of TBM. The adsorption capacity of TBM followed the order of ozonized-chlorinated PET (2.64 × 10−6 μg/μg) > ozonized PET (2.58 × 10−6 μg/μg) > pristine PET (2.43 × 10−6 μg/μg). The impact of raw water characteristics on the adsorption of TBM onto PETs, such as the pH, and the coexistence of inorganic ions and macromolecules (humic acid, surfactant, and bovine serum albumin) were studied. A different predominant adsorption mechanism between TBM and pristine PET or oxidized PETs was proposed.
Collapse
|
34
|
The removal of microplastics from water by coagulation: A comprehensive review. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 851:158224. [PMID: 36007643 DOI: 10.1016/j.scitotenv.2022.158224] [Citation(s) in RCA: 16] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/06/2022] [Revised: 07/31/2022] [Accepted: 08/19/2022] [Indexed: 06/15/2023]
Abstract
Drinking water treatment plants (DWTPs) and wastewater treatment plants (WWTPs) are the first and last hurdles for the prevention of microplastics (MPs) pollution, respectively. With coagulation as one of the most critical technologies for the removal of MPs in water treatment plants, there is an urgent need to gain an in-depth understanding of the mechanisms and influencing factors of MPs removal during coagulation. In this paper, the research progress of adopting coagulation in MPs removal in recent years is reviewed, the removal effect of coagulation in water treatment plants are compared, and the role of three coagulation mechanisms, i.e., charge neutralization, adsorption bridging, and sweep flocculation in MPs removal process are identified. The effect of coagulant performance, MPs characteristics, operation conditions and other parameters on the removal of MPs are systematically analyzed. It is found that the combined coagulation techniques have better removal efficiency, can better decrease MP pollution and meet strict discharge standards. Moreover, flaws in the application of coagulation technology are pointed out, and strategies to deal with them are also proposed. Hopefully, this review can not only contribute to a better understanding of the mechanism of MPs removal by coagulation technology, but also serve as a useful guide for future research on MPs removal.
Collapse
|
35
|
Screening of microplastics in water and sludge lines of a drinking water treatment plant in Catalonia, Spain. WATER RESEARCH 2022; 225:119185. [PMID: 36209664 DOI: 10.1016/j.watres.2022.119185] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/29/2022] [Revised: 09/16/2022] [Accepted: 09/29/2022] [Indexed: 06/16/2023]
Abstract
Microplastics (MPs) are emerging pollutants detected everywhere in the environment, with the potential to harm living organisms. The present study investigated the concentration, morphology, and composition of MPs, between 20 μm and 5 mm, in a drinking water treatment plant (DWTP) located close to Barcelona (Catalonia, NE Spain). The sampling included different units of the DWTP, from influent to effluent as well as sludge line. Sampling strategy, filtration, allows sampling of large volumes of water avoiding sample contamination, and during 8 h in order to increase the representativeness of MPs collected. The pre-treatment of the samples consisted of advanced oxidation with Fenton's reagent and hydrogen peroxide, followed by density separation of the particles with zinc chloride solution. Visual identification was performed with an optical and stereoscopic microscope with final Fourier-transform infrared spectroscopic (FTIR) confirmation. MPs were found in all DWTP samples, with concentrations from 4.23 ± 1.26 MPs/L to 0.075 ± 0.019 MPs/L in the influent and effluent of the plant, respectively. The overall removal efficiency of the plant was 98.3%. The most dominant morphology was fibers followed by fragments and films. Twenty-two different polymer types were identified and synthetic cellulose, polyester, polyamide, polypropylene, polyethylene, polyurethane, and polyacrylonitrile were the most common. Although MPs could be incorporated from the distribution network, MPs intake from drinking water from this DWTP was not an important route compared to fish and seafood ingestion.
Collapse
|
36
|
The effect of adsorption on the fate of colloidal polystyrene microplastics in drinking water distribution system pipe scales. JOURNAL OF HAZARDOUS MATERIALS 2022; 439:129680. [PMID: 36104907 DOI: 10.1016/j.jhazmat.2022.129680] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/10/2022] [Revised: 07/19/2022] [Accepted: 07/24/2022] [Indexed: 06/15/2023]
Abstract
With microplastics (MPs) being continuously found in various environments, the pollution of water supply systems by MPs is receiving increasing attention. As the sediment in drinking water distribution systems (DWDSs), pipe scales act as the interface for complex reactions between bulk water and pipe surfaces. Consequently, the fate of MPs in pipe scales requires exploration, especially colloidal MPs. In this study, MPs were detected in different pipe scale layers, with concentrations of 0.32-3.10 items g-1. Subsequently, the adsorption interaction mechanisms between pipe scales and colloidal polystyrene microplastics (PSMPs) were investigated through batch adsorption experiments. The findings indicated that pipe scales showed a potential adsorption capacity for PSMPs. The adsorption kinetics and isotherms results demonstrated that the PSMP adsorption process was physically dominant and complicated. van der Waals and electrostatic interactions, hydrogen bonding, and pore filling were the main adsorption mechanisms. These results verify that colloidal MPs can be adsorbed by pipe scales, demonstrating that pipe scales play an essential role in the fate of colloidal MPs in DWDSs and the quality and security of drinking water. The secondary release of MPs from pipe scales is also worthy of attention due to the environmental and health risks.
Collapse
|
37
|
Investigation of the effect of microplastics on the UV inactivation of antibiotic-resistant bacteria in water. WATER RESEARCH 2022; 222:118906. [PMID: 35914503 DOI: 10.1016/j.watres.2022.118906] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/12/2022] [Revised: 07/20/2022] [Accepted: 07/24/2022] [Indexed: 06/15/2023]
Abstract
This study investigated the effect of polyethylene and polyvinyl chloride microplastics on the UV fluence response curve for the inactivation of multidrug-resistant E. coli and enterococci in ultrapure water at pH 6.0 ± 0.1. In the absence of microplastics, the UV inactivation of the studied bacteria exhibited an initial resistance followed by a faster inactivation of free (dispersed) bacteria, while in the presence of microplastics, these 2 regimes were followed by an additional regime of slower or no inactivation related to microplastic-associated bacteria (i.e., bacteria aggregated with microplastics resulting in shielding bacteria from UV indicated by tailing at higher UV fluences). The magnitude of the negative effect of microplastics varied with different microplastics (type/particle size) and bacteria (Gram-negative and Gram-positive). Results showed that when the UV transmittance of the microplastic-containing water was not taken into account in calculating UV fluences, the effect of microplastics as protectors of bacteria was overestimated. A UV fluence-based double-exponential microbial inactivation model accounting for both free and microplastic-associated bacteria could describe well the disinfection data. The present study elucidated the effect of microplastics on the performance of UV disinfection, and the approach used herein to prove this concept may guide future research on the investigation of the possible effect of other particles including nanoplastics with different characteristics on the exposure response curve for the inactivation of various microorganisms by physical and chemical disinfection processes in different water and wastewater matrices.
Collapse
|
38
|
Tracing microplastics from raw water to drinking water treatment plants in Busan, South Korea. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 825:154015. [PMID: 35189238 DOI: 10.1016/j.scitotenv.2022.154015] [Citation(s) in RCA: 19] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/02/2021] [Revised: 02/14/2022] [Accepted: 02/15/2022] [Indexed: 06/14/2023]
Abstract
The increasing amount of plastic waste has raised concerns about microplastics (MPs) in aquatic environments. MPs can be fragmented into nanoplastics that can pass through water treatment processes and into tap water; potentially threatening human health because of their high adsorption capacity for hazardous organic materials and their intrinsic toxicity. This case study investigates the identification, fate, and removal efficiency of MPs in Korean drinking water treatment plants. Two sites on the Nakdong River, two lake reservoirs (raw water sources), and four corresponding drinking water treatment plants were targeted to trace the amounts, types, and sizes of MPs throughout the treatment process. Monthly quantitative and qualitative analyses were conducted by chemical image mapping using micro-Fourier-transform infrared spectroscopy. MPs larger than 20 μm were detected, and their sizes and types were quantified using siMPle software. Overall, the number of MPs in the river sites (January to April and October to November) exceeded those in the reservoirs, but only slight differences in the number of MPs between rivers and lake reservoirs were detected from June to October. The annual average number of MPs in River A, B and Lack C and D was not distinctively different (2.65, 2.48, 2.46 and 1.87 particles/L, respectively). The majority of MPs found in raw waters were polyethylene (PE)/polypropylene (PP) (> 60%) and polyethylene terephthalate (PET)/poly(methyl methacrylate) (PMMA) (20%), in addition to polyamide (<10%) in the river and polystyrene (<10%) in the lake reservoirs. Approximately 70-80% of the MPs were removed by pre-ozonation/sedimentation; 81-88% of PE/PP was removed by this process. PET/PMMA was removed by filtration. Correlation of MPs with water quality parameters showed that the Mn concentration was moderately correlated with the MP abundance in rivers and lake reservoirs, excluding the lake with the lowest Mn concentration, while the total organic carbon was negatively correlated with the MP abundance in both rivers (A and B) and lake reservoir C.
Collapse
|
39
|
Removal of polystyrene nanoplastics from water by CuNi carbon material: The role of adsorption. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 820:153190. [PMID: 35051471 DOI: 10.1016/j.scitotenv.2022.153190] [Citation(s) in RCA: 16] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/01/2021] [Revised: 01/12/2022] [Accepted: 01/12/2022] [Indexed: 06/14/2023]
Abstract
Nanoplastics have attracted wide attention worldwide as a new potentially threatening pollutant, and they can cause harm to the organisms and pose threat to the water environment. Therefore, efficient removal techniques for nanoplastics are urgently needed. In this study, CuNi carbon material (CuNi@C) was prepared by hydrothermal method for the removal of polystyrene (PS) nanoplastics from water. CuNi@C was effectively adsorbed on PS nanoplastics. When the CuNi@C dosage increased from 0.1 g/L to 0.3 g/L, the removal efficiency of PS nanoplastics (10 mg/L) elevated from 32.72% to 99.18%. The images of the scanning electron microscope (SEM) and the Fourier transform infrared spectroscopy (FTIR) spectra of CuNi@C confirmed the adsorption of PS nanoplastics on the CuNi@C. The fitting results of adsorption kinetic models and isotherms equations demonstrated that physical adsorption and monolayer coverage were the predominant mechanisms of the PS nanoplastics adsorption on CuNi@C. Thermodynamics analysis illustrated the adsorption of PS nanoplastics on CuNi@C was a spontaneous and endothermic process. The electrostatic attraction occurred in adsorption progress, and the removal efficiency of PS nanoplastics in the acidic system was generally higher than that in the alkaline system. CuNi@C can be recycled via washing and drying treatment and these CuNi@C comparable PS nanoplastics removal performance to the original ones. After four times cycles, CuNi@C can still remove ~75% of total PS nanoplastics from water. This study reveals that CuNi@C can be used as promising techniques for the removal of PS nanoplastics from the aqueous environment.
Collapse
|
40
|
Reuse of Water Contaminated by Microplastics, the Effectiveness of Filtration Processes: A Review. ENERGIES 2022. [DOI: 10.3390/en15072432] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
Water treatment generally does not specifically address the removal of microplastics (MPs). Nevertheless, treatment plants process water effectively, and the number of synthetic microparticles in effluents is usually very low. Still, discharge volumes from water-treatment plants are often elevated (reaching around 108 L/day), leading to the daily discharge of a substantial number of MPs and microfibers. Furthermore, MPs accumulate in the primary and secondary sludge, which in the end results in another environmental problem as they are currently used to amend soils, both for cultivation and forestry, leading to their dispersion. Something similar occurs with the treatment of water intended for human consumption, which has a much lower but still significant number of MPs. The amount of these pollutants being released into the environment depends on the processes that the water undergoes. One of the most-used treatment processes is rapid sand filtration, which is reviewed in this article. During the filtration process, MPs can break into smaller pieces, resulting in a greater number of plastic particles which mainly accumulate in sewage sludge. Thermal processes, such as incineration, carried out in facilities with the best available techniques in practice, could guarantee the safe disposal of highly MP-contaminated sewage sludges.
Collapse
|
41
|
Occurrence and distribution of microplastics in sediments of a man-made lake receiving reclaimed water. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 813:152430. [PMID: 34952049 DOI: 10.1016/j.scitotenv.2021.152430] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/21/2021] [Revised: 12/08/2021] [Accepted: 12/11/2021] [Indexed: 06/14/2023]
Abstract
Microplastics have been widely detected in the effluent discharged from wastewater treatment plants. However, few studies have focused on the occurrence of microplastics in the sediments of waterbodies receiving reclaimed water. The present study investigated the microplastics distribution in the sediments of such a lake in Tianjin, China receiving reclaimed water and determined the factors affecting the settlement of microplastics in the sediment column. Nine sediment cores were collected and the abundance, shape, size, and color of the microplastics were determined. The polymers of microplastics were identified and the mass concentrations of polyethylene terephthalate (PET) and polycarbonate (PC) were analyzed. Large amount of microplastics were found to accumulate in the sediments of the lake receiving reclaimed water. Eighteen polymers were found in the sediments and PA, PET, PP, PSF, and PU are much more than others. In surface sediments, PET and PC ranged from 2.43 to 10.62 mg/kg and 0.03 to 0.77 mg/kg, respectively. Fragment and fiber are the most common shapes, accounting for 67.5% and 24.8% of all the microplastics. The distribution of microplastics was influenced by polymer type, size, shape, and grain size of the sediments. Microplastic morphological diversities decreased with increasing depth of the sediments. Our findings provide evidence that the sediments of receiving waterbodies are important sinks of the microplastics in reclaimed water.
Collapse
|
42
|
Modifications of ultraviolet irradiation and chlorination on microplastics: Effect of sterilization pattern. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 812:152541. [PMID: 34954159 DOI: 10.1016/j.scitotenv.2021.152541] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/18/2021] [Revised: 12/13/2021] [Accepted: 12/15/2021] [Indexed: 06/14/2023]
Abstract
Chlorination and ultraviolet disinfection in drinking water treatment plants (DWTPs) may be highly destructive for microplastics (MPs). Investigating the effect of sterilization patterns on MPs behavior modifications can provide useful information to evaluate their potential risk to drinking water safety. In this study, aged polyethylene (PE), polyethylene terephthalate (PET), polystyrene (PS) and polyvinyl chloride (PVC) were applied, and five well-designed sterilization patterns with low and high doses disinfection were performed. Especially, a combining sterilization pattern including ultraviolet disinfection, low-dose chlorination and high-dose chlorination was designed to simulate the actual disinfection processes in environmental engineering systems. Different sterilization patterns contributed various chlorinated and oxidized modifications on the MPs surface, resulting in distinct effects on their sinking and adsorption performance. After combining sterilization (180 mJ cm-2 UV-C irradiation +9675 mg min L-1 chlorination), the adsorption capacities of ciprofloxacin by PET and PVC were slightly improved, and the one by PS was inhibited. Yet, PET, PVC and PS tend to sink (>95%) after this combining sterilization, implying that these MPs would be retained in DWTPs or water supply pipes. For PE, even though it maintained floating on water, its adsorption of ciprofloxacin was inhibited by combining sterilization (Kf reduced from 0.142 L g-1 to 0.069 L g-1). In general, multiple sterilization patterns can enhance the sinking and inhibit the adsorption performance of MPs, reducing their potential to become vectors of organic contaminants and risk to drinking water users.
Collapse
|
43
|
Chlorine disinfection elevates the toxicity of polystyrene microplastics to human cells by inducing mitochondria-dependent apoptosis. JOURNAL OF HAZARDOUS MATERIALS 2022; 425:127842. [PMID: 34875417 DOI: 10.1016/j.jhazmat.2021.127842] [Citation(s) in RCA: 31] [Impact Index Per Article: 15.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/01/2021] [Revised: 11/08/2021] [Accepted: 11/16/2021] [Indexed: 06/13/2023]
Abstract
Microplastics (MPs) are ubiquitous in drinking water and pose potential threats to human health. Despite increasingly attentions on the toxicity of MPs, the deleterious effects of MPs after chlorine disinfection, which might be a more accessible form of MPs, has rarely been considered. Here, we first treated pristine polystyrene microplastics (PS-MPs) with chlorine to simulate the reactions that occur during drinking water treatment, and investigated and compared the cytotoxicity of chlorinated PS-MPs to those of pristine PS-MPs. Chlorine disinfection did not change the size of pristine PS-MPs, but increased the surface roughness. In addition, abundant carbon-chlorine bonds and persistent free radicals were generated on the surface of chlorinated PS-MPs. Compared with pristine PS-MPs, chlorinated PS-MPs markedly inhibited the cell proliferation, changed cellular morphology, destroyed cell membrane integrity, induced cell inflammatory response and apoptosis. Proteomics confirmed the difference in interactions with intracellular proteins between these particles. Furthermore, we found that the regulation of PI3K/AKT and Bcl-2/Bax pathways, oxidative stress-triggered mitochondrial depolarization, and the activation of caspase cascade were identified as the underlying mechanisms for the enhanced apoptosis ratio in GES-1 cells when exposed to chlorinated PS-MPs. This exacerbated cytotoxicity could be explained by the enhanced surface roughness and changed surface chemistry of these PS-MPs after chlorine disinfection. This work discloses the impacts of chlorine disinfection on the cytotoxicity of PS-MPs, which provides new insights for a more systematic risk assessment of MPs.
Collapse
|
44
|
Advanced oxidation processes for microplastics degradation: A recent trend. CHEMICAL ENGINEERING JOURNAL ADVANCES 2022. [DOI: 10.1016/j.ceja.2021.100213] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023] Open
|
45
|
A review on microplastics separation techniques from environmental media. JOURNAL OF CLEANER PRODUCTION 2022; 337:130458. [DOI: 10.1016/j.jclepro.2022.130458] [Citation(s) in RCA: 32] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/02/2023]
|
46
|
|
47
|
Identification of microplastics in conventional drinking water treatment plants in Tehran, Iran. JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE & ENGINEERING 2021; 19:1817-1826. [PMID: 34900309 PMCID: PMC8617154 DOI: 10.1007/s40201-021-00737-3] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/19/2021] [Accepted: 09/04/2021] [Indexed: 05/06/2023]
Abstract
The presence of microplastics (MPs), as an emerging pollutant is a growing concern in drinking water, yet most of the studies have been carried out in surface waters and wastewater treatment plants and there are few studies on MPs in drinking water treatment plants (DWTPs). This study investigates these particles in three different conventional DWTPs in the city of Tehran, Iran, and aims to analyze these particles down to the size of 1 µm. A scanning electron microscope was utilized in this study to quantitatively analyze MPs. Accordingly, the average abundance of MPs in raw and treated water samples varied from 1996 ± 268 to 2808 ± 80 MPs L-1 and 971 ± 103 to 1401 ± 86 MPs L-1, respectively. While particles smaller than 10 µm comprised 65-87% of MPs. Moreover, µ-Raman spectroscopy was used to characterize MPs. As the results, polypropylene, polyethylene terephthalate, and polyethylene were the most abundant identified polymers among MPs, comprising more than 53% of particles. Additionally, MPs were categorized as fibers, fragments, and spheres. This study fills the knowledge gap of MPs presence in Tehran conventional DWTPs which is of high importance since they supply drinking water for more than 8 million people and investigates the performance of conventional DWTPs in removing MPs. SUPPLEMENTARY INFORMATION The online version contains supplementary material available at 10.1007/s40201-021-00737-3.
Collapse
|
48
|
Removal of microplastics from wastewater: available techniques and way forward. WATER SCIENCE AND TECHNOLOGY : A JOURNAL OF THE INTERNATIONAL ASSOCIATION ON WATER POLLUTION RESEARCH 2021; 84:3689-3704. [PMID: 34928836 DOI: 10.2166/wst.2021.472] [Citation(s) in RCA: 19] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Microplastics are the newly emerged contaminants with a presence in almost every part of the globe. Despite being small in size, microplastic particles have proved to be harmful for plants, animals, humans, and for the ecosystem in general. Water is one of the most important routes through which microplastics transfer from one place to another. Moreover, water is also an important route for the ingestion of microplastics in human, which results in various health issues, such as cancer, mutagenic and teratogenic abnormalities. Thus, microplastics in water is an emerging public health issue which needs attention and, hence, it is important to investigate removal techniques for microplastics in wastewater. Although, there are some biological, chemical/electrochemical, and physical techniques to remove microplastics, their wide scale applicability and cost-effectiveness is an issue. In this review, we have discussed the existing and upcoming treatment technologies for the removal of microplastics from wastewater and also tried to present an overview for the future approaches.
Collapse
|
49
|
Microplastics in Wastewater and Drinking Water Treatment Plants: Occurrence and Removal of Microfibres. APPLIED SCIENCES-BASEL 2021. [DOI: 10.3390/app112110109] [Citation(s) in RCA: 22] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
Abstract
Microplastics (MPs), and specifically microfibres (MPFs), are ubiquitous in water bodies, including wastewater and drinking water. In this work, a thorough literature review on the occurrence and removal of MPs, and specifically MPFs in WWTPs and DWTPs, has been carried out. When the water is treated, an average microfiber removal efficiency over 70% is achieved in WWTPs and DWTPs. These high percentages are still inefficient for avoiding the presence of a large number of microfibres in treated wastewater and also in tap water. RSF, DAF, oxidation ditch and CAS processes have been described as the most efficient treatments for eliminating MPFs from wastewater treatment. It is remarkable the wide range of the data reported on this topic; for example, treated wastewater contains between not detected and 347 MPFs/L, whereas tap water contains between not detected and 168 MPFs/L. Microfibres constitute more than half of the MPs found in treated wastewater and sewage sludge, whereas in DWTP effluents the percentage of MPFs is around 32%. Nevertheless, the relative amount of MPFs reported in tap water is notably higher (71%). Microfibres from WWTPs are discharged to the environment, being a source of MP pollution. Additionally, MPs released by DWTPs directly enter the drinking water lines, which constitute a direct route for MP human consumption, so that it has been estimated that an adult may ingest an average value of 7500 MPFs per year only via tap water. Thus, this review provides an update on the performance of WWTPs and DWTPs in removing MPs from water, which is an issue of great interest.
Collapse
|
50
|
What have we known so far about microplastics in drinking water treatment? A timely review. FRONTIERS OF ENVIRONMENTAL SCIENCE & ENGINEERING 2021; 16:58. [PMID: 34697577 PMCID: PMC8527969 DOI: 10.1007/s11783-021-1492-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/30/2021] [Revised: 08/30/2021] [Accepted: 09/06/2021] [Indexed: 05/06/2023]
Abstract
Microplastics (MPs) have been widely detected in drinking water sources and tap water, raising the concern of the effectiveness of drinking water treatment plants (DWTPs) in protecting the public from exposure to MPs through drinking water. We collected and analyzed the available research articles up to August 2021 on MPs in drinking water treatment (DWT), including laboratory- and full-scale studies. This article summarizes the major MP compositions (materials, sizes, shapes, and concentrations) in drinking water sources, and critically reviews the removal efficiency and impacts of MPs in various drinking water treatment processes. The discussed drinking water treatment processes include coagulation-flocculation (CF), membrane filtration, sand filtration, and granular activated carbon (GAC) filtration. Current DWT processes that are purposed for particle removal are generally effective in reducing MPs in water. Various influential factors to MP removal are discussed, such as coagulant type and dose, MP material, shape and size, and water quality. It is anticipated that better MP removal can be achieved by optimizing the treatment conditions. Moreover, the article framed the major challenges and future research directions on MPs and nanoplastics (NPs) in DWT.
Collapse
|