Modification of naturally abundant resources for remediation of potentially toxic elements: A review

A review of solid wastes-based stabilizers for remediating heavy metals co-contaminated soil: Applications and challenges

The remediation of heavy metals/metalloids (HMs) co-contaminated soil by solid wastes-based stabilizers (SWBS) has received major concern recently. Based on the literature reported in the latest years (2010-2023), this review systematically summarizes the different types of solid wastes (e.g., steel slag, coal fly ash, red mud, and sewage sludge, etc.) employed to stabilize HMs contaminated soil, and presents results from laboratory and field experiments. Firstly, the suitable solid wastes for soil remediation are reviewed, and the pros and cons are presented. Thereafter, the technical feasibility and economic benefit are evaluated for field application. Moreover, evaluation methods for remediation of different types of HMs-contaminated soil and the effects of SWBS on soil properties are summarized. Finally, due to the large specific surface, porous structure, and high reactivity, the SWBS can effectively stabilize HMs via adsorption, complexation, co/precipitation, ion exchange, electrostatic interaction, redox, and hydration process. Importantly, the environmental implications and long-term effectiveness associated with the utilization of solid wastes are highlighted, which are challenges for practical implementation of soil stabilization using SWBS, because the aging of soil/solid wastes has not been thoroughly investigated. Future attention should focus on modifying the SWBS and establishing an integrated long-term stability evaluation method.

Optimization of Selective Hydrometallurgical Tantalum Recovery from E-Waste Using Zeolites

To protect future high-tech metal demand, a selective and efficient recovery method for tantalum from a tantalum-rich e-waste component sample was developed. Ultrasound-assisted digestion of the component sample was optimized, and the highest dissolution rate was achieved using a mixture of 8 mol/L H2SO4 and HF at a temperature of 60 °C. The determined amount of tantalum was as high as 11 000 ± 1000 mg/kg, which results in a high potential for recyclable tantalum. The other major elements of this complex e-waste fraction were silicon, iron, aluminum, and tin. Efficient recovery of tantalum from the leachate was performed using the zeolite material ZSM-5. Extremely high selectivity and a recovery rate of over 98% were obtained. In terms of adsorption efficiency, selectivity, and durability of the material, optimal adsorption was obtained using the diluted sample at 0.5 mol/L of H2SO4. The adsorption capacity of ZSM-5 for tantalum was determined to be 10.5 ± 0.6 mg/g, and tantalum was selectively eluted with 1:4 diluted ethanolamine with a yield of 87.2 ± 1.5%.

Catalytic oxidation of lignite by Pt/TiO2 can enhance cadmium adsorption capacity

Addressing global warming necessitates innovative strategies in fossil fuel management. This study evaluates lignite, a low-rank coal with limited calorific value, exploring applications beyond its use as fuel. Utilizing Pt/TiO2 catalytic oxidation, the research aims to enhance the cadmium adsorption capacity of lignite in wastewater. Lignite, treated with 0.5% Pt/TiO2 at 125 °C for 2 h, demonstrated a threefold increase in cadmium adsorption capacity. Characterization using TGA-DSC confirmed the modification process as exothermic and self-sustainable. Spectroscopic analysis and Boehm titration revealed significant alterations in pore structure, surface area, and oxygen-containing functional groups, emphasizing the effectiveness of catalytic oxidation. Adsorption mechanisms such as complexation, cation exchange, and cation-π interactions were identified, enhancing Cd adsorption. Techniques, including the d-band model, H2-TPR, and O2-TPD, indicated that dissociative adsorption of molecular O2 and the subsequent generation of reactive oxygen species introduced additional oxygen-containing functional groups on the lignite surface. These findings provide essential strategies for the alternative use of lignite in environmental remediation, promoting sustainable resource utilization and enhancing cost-effectiveness in remediation processes. ENVIRONMENTAL IMPLICATION: This study innovates in using lignite to reduce cadmium (Cd) contamination in wastewater. Employing Pt/TiO2 catalytic oxidation, lignite is transformed, enhancing its cadmium adsorption capacity. This process, being exothermic, contributes to decreased energy consumption. The approach not only mitigates the hazardous impacts of cadmium but also aligns with sustainability by reducing greenhouse gas emissions and energy use, showcasing a multifaceted environmental advancement.

Abating ammonia emission from poultry manure by Pt/TiO2 modified corn straw

Poultry manure is a significant source of ammonia (NH3) emissions, which not only poses detrimental impacts on human well-being and the ecological system, but also leads to economic losses in the agricultural industry. Herein, we modified corn straw (CS) with 1 wt% Pt/TiO2 catalysts using a low-temperature partial-oxidation technology to mitigate NH3 emissions from poultry manure. It was found that Pt/TiO2 can enable exothermic processes to occur at lower temperatures by reducing the activation energy. Under optimal modification conditions of 220 °C, the NH3 uptakes of modified CS samples were markedly greater compared to those of the original CS. Addition of 20-50% modified CS to poultry manure resulted in significant reductions of 54.1-98.6% in NH3 emissions compared to the control. Mechanistic studies indicate that NH3 adsorption on the modified CS is mainly driven by the presence of acidic and alkaline functional groups, while surface area and pore structure have a negligible effect. XPS combined with NH3-TPD reveals that the formation of amide and amine bonds contributes to the excellent stability of adsorbed NH3. H2-TPR, O2-TPD, and d-band theory suggest that strong metal-support interactions between Pt and TiO2 could be particularly crucial in catalyzing CS modification. This study proposes an environmentally sustainable and economically viable solution for abating NH3 emissions from poultry manure, thereby addressing crucial environmental and economic concerns in the agricultural sector.

Nanomaterials in biochar: Review of their effectiveness in remediating heavy metal-contaminated soils

Biochar can be used for soil remediation in environmentally beneficial manner, especially when combined with nanomaterials. After a decade of research, still, no comprehensive review was conducted on the effectiveness of biochar-based nanocomposites in controlling heavy metal immobilization at soil interfaces. In this paper, the recent progress in immobilizing heavy metals using biochar-based nanocomposite materials were reviewed and compared their efficacy against that of biochar alone. In details, an overview of results on the immobilization of Pb, Cd, Cu, Zn, Cr, and As was presented by different nanocomposites made by various biochars derived from kenaf bar, green tea, residual bark, cornstalk, wheat straw, sawdust, palm fiber, and bagasse. Biochar nanocomposite was found to be most effective when combined with metallic nanoparticles (Fe₃O₄ and FeS) and carbonaceous nanomaterials (graphene oxide and chitosan). This study also devoted special consideration to different remediation mechanisms by which the nanomaterials affect the effectiveness of the immobilization process. The effects of nanocomposites on soil characteristics related to pollution migration, phytotoxicity, and soil microbial composition were assessed. A future perspective on nanocomposites' use in contaminated soils was presented.

Selenium/sulfur-modified montmorillonite materials mitigate mercury pollution in farmland

Selenium (Se) amendment could reduce mercury (Hg) bioaccumulation in crops, but sometimes it could cause excessive Se accumulation in crops and potential Se exposure risks for humans. In this study, we designed and synthesized selenium and sulfur-modified montmorillonite materials (Se/S-Mont) to effectively reduce mercury levels and avoid excessive Se enrichment in plants. The results of pot experiments (1 g Se/S-Mont/100 g soil) and field microplot trials (0.3 g Se/S-Mont/100 g soil, 8 t/ha) showed that Se/S-Mont amendments significantly reduced the Hg concentrations in water spinach and hybrid Pennisetum by 28-68% and 57%-92% (P < 0.05), respectively, while they did not lead to excessive Se bioaccumulation in the plants. Se/S-Mont was more efficient in mitigating soil Hg pollution than adding raw materials (e.g., NaSeO₃) and their combinations, and they significantly reduced the available Se fraction in the soil and the Se levels in the plants (P < 0.05). The potential mechanisms revealed by X-ray absorption near-edge spectra (XANES) and pot experiments were the adsorption and slow release of Hg, S, and Se by Se/S-Mont, the high affinity between Hg and Se, competition between Se and S, and the formation of stable complexes containing Se-S-Hg. The Se/S-Mont immobilizer was easy to prepare and required the application of small amounts, and the remediation effect was relatively stable and exhibited few negative effects; therefore, the approach showed high environmental and economic potentials.

Catalytic modification of corn straw facilitates the remediation of Cd contaminated water and soil

Turning postharvest residue into high-value-added products is crucial for agricultural waste management and environmental remediation. In this proof-of-concept study, nanosized Pt/TiO₂ was used as a model catalyst to modify corn straw (CS) materials through a simple low-temperature oxidation process. This method was demonstrated to be self-sustainable, waste-free, and with high yields. At an optimal temperature of 220 °C, O₂ treatment with 1 wt% Pt/TiO₂ greatly changed ultra-micropore and mesopore structures, dissolved organic carbon, aromatic contents and surface oxygen (O)-containing functional groups in CS products. This treatment resulted in an approximately 5-fold increase of cadmium (Cd) adsorption from aqueous solution and immobilization rate of 43.1% at 7d for bioavailable Cd in soil. Spectroscopic and linear regression analysis demonstrated that both acidic and basic functional groups in CS contributed to Cd adsorption, suggesting chemical adsorption. According to the d-band theory, the unexpected role of catalysts in CS modification could be associated with dissociative adsorption of molecular O₂ on the Pt surface. These results provide insights for the development of economic and sustainable technologies to reutilize agricultural waste biomass for water and soil remediation.

Cow manure simultaneously reshaped antibiotic and metal resistome in the earthworm gut tract by metagenomic analysis

Earthworm conversion is an eco-friendly biological process that converts livestock waste into a benign nutrient-rich organic fertilizer. However, little is known about the impacts of earthworm-converted livestock manure on the antibiotic resistome in the earthworm gut microbiota. Herein, lab-scale vermicomposting was performed to comprehensively evaluate the shift of antibiotic resistance genes (ARGs) in the earthworm gut-feeding on cow manure (CM)-by metagenomic analysis. The effects of copper (Cu) as a food addictive were also evaluated. CM substantially enriched the antibiotic resistome in the foregut and midgut, while it decreased in the hindgut. A similar trend was observed for metal resistance genes (MRGs). Notably, Cu in the CM had little effect on composition of ARGs and MRGs in earthworm gut. The earthworm gut microbiome altered by CM was responsible for the shift of ARGs and MRGs. In wormcast, Cu (100 and 300 mg/kg) significantly increased the abundance of ARGs and MRGs. Our study provides valuable insight into the response of ARGs and MRGs to CM in earthworm gut, and underscores the need for the judicious use of heavy metals as feed additives in livestock and poultry farming.

Bioremediation potential of cadmium by recombinant Escherichia coli surface expressing metallothionein MTT5 from Tetrahymenathermophila

Cadmium (Cd) is a common heavy metal contaminant in industrial wastewater that causes many diseases in humans. Metallothionein (MT), a cysteine-rich metal-binding protein, is well known in chelate-heavy metals. In this study, we expressed MTT5 of Tetrahymena thermophila fused with Lpp-OmpA in the outer membrane of Escherichia coli to determine its ability to accumulate and adsorb Cd. Our results revealed that our recombinant E. coli had a 4.9-fold greater Cd adsorption compared to wild E. coli. Adsorption isothermic analysis demonstrated that the adsorption behavior for Cd in our recombinant bacteria was better fitted into the Freundlich isotherm model than Langmuir isotherm model. Fourier-transform infrared spectroscopy indicated that phosphate and organic phosphate groups were involved in the interaction between Cd and the bacterial surface. Using quantitative reverse transcription polymerase chain reaction, we further showed that the expression of metal-resistance genes (dnaK and clpB) was downregulated due to surface MTT5 protected our recombinant bacteria from Cd²⁺ adsorption. Furthermore, we showed that our recombinant bacteria could adsorb Cd from the contaminated wastewater containing other metals and were suggested to be applied in the field study.

Subcellular localization and compartment-specific toxicokinetics of cadmium, arsenic, and zinc in brandling worm Eisenia fetida

Awareness of toxicokinetics at the subcellular level is crucial to deciphering the underlying intoxication processes of metal(loid)s, although this information is often lacking. Here, the toxicokinetics of two non-essential metal(loid)s (Cd and As) and one essential metal (Zn) in both the whole body and subcellular fractions of earthworm (Eisenia fetida) were assessed. Earthworms were exposed to natural soils originating from a gradient of metal(loid) pollution for 14 days followed by a 14-day elimination phase in clean soil. Clearly distinct toxicokinetic patterns were found in the earthworms according to the metal(loid) considered. An obvious concentration-dependent increase was observed in earthworms or subcellular compartments where no equilibrium was reached (with slow or no elimination) for Cd and As throughout the experiment. As for Zn, the earthworms were able to retain a steady-state concentration of Zn in its body or each fraction without a clear intake behavior via the dynamic trade-off between uptake and elimination at different pollution levels. These differences in toxicokinetics at the subcellular level supported the observed differences in bioaccumulation patterns and were indicative of the strategy by which non-essential and essential elements are handled by earthworms. Notably, the concentration of Cd and As in subcellular compartments showed the same pattern as for Zn in the order of cellular cytosol > cellular debris > metal-rich granules, which might be associated with the binding of non-essential/essential elements with metallothionein enriched in the cytosol. Our findings enhance the understanding of the underlying mechanisms for metal(loid) accumulation kinetics in earthworms from the perspective of subcellular partitioning, and will be beneficial for accurate risk assessment of Cd, As, and Zn.

Structural features promoting adsorption of contaminants of emerging concern onto TiO2 P25: experimental and computational approaches

The study of the structural features affecting the adsorption of organics, especially contaminants of emerging concern (CECs), onto TiO₂ P25 in aqueous medium has far-reaching implications for the understanding and modification of TiO₂ P25 in the roles such as an adsorbent and photocatalyst. The effect of pH and γ(TiO₂ P25) as variables on the extent of removal of organics by adsorption on TiO₂ P25 was investigated by response surface methodology (RSM) and quantitative structure-property relationship (QSPR) modeling. Experimentally determined coefficients of adsorption were used as responses in RSM, yielding a quadratic polynomial equation (QPE) for each of the studied organics. Furthermore, coefficients (A, B, C, D, E, and F) obtained from QPEs were used as responses in QSPR modeling to establish their dependence on the structural features of the studied organics. The functional stability and predictive power of the resulting QSPR models were confirmed with internal and external cross validation. The influence of structural features of organics on the adsorption process is explained by molecular descriptors included in the derived QSPR models. The most influential descriptors on the adsorption of organics on TiO₂ P25 are found to be those correlated with ionization potential, molecular mass, and volume, then molecular fragments (e.g., -CH =) and particular topological features such as C and N atoms, or two heteroatoms (e.g., N and N or O and Cl) at certain distance. Derived QSPR models can be considered as robust predictive tools for evaluating efficiency of adsorption processes onto TiO₂ P25, providing insights into influential structural features facilitating adsorption process.

Low-cost Posidonia oceanica bio-adsorbent for efficient removal of antibiotic oxytetracycline from water

The presence of antibiotics as micro-contaminants in the water and aqueous environments is a health concern to humans and the ecosystem. Therefore, their elimination by adsorption to available and cheap materials in water treatment plants is a research topic of high relevance. The present paper reports on the adsorption behavior of oxytetracycline on a bio-adsorbent prepared from Posidonia oceanica; an abundant Mediterranean biomass. Characterization of the pretreated Posidonia biomaterial was achieved using several analyses such as Boehm acid-base titration method, pH_PZC determination, and analysis techniques (FTIR, ¹³C CP-MAS NMR, optical microscopy, and TGA). The pH_PZC occurred around pH 2.11. Posidonia biomaterial showed a fast and high uptake rate throughout the adsorption process, which is a definite advantage for analytical applications such as water decontamination. The experimental kinetic data fitted very rightly the pseudo-second-order kinetic model and the equilibrium uptake can adopt the bi-Langmuir isotherm model for all studied pH values which assumes adsorptions at the two localized sites. Maximum adsorption capacities of 11.8 mg∙g^-1 and 4.4 mg∙g^-1 for the two adsorption sites are reached at pH 6. The oxytetracycline adsorption process onto Posidonia bio-adsorbent is spontaneous (Δ_adsG⁰ < 0), exothermic (Δ_adsH⁰ < 0), and entropically favorable (Δ_adsS⁰ > 0). The effect of pH on adsorption behavior and the thermodynamic parameters of adsorption are consistent with a possible origin of adsorption of oxytetracycline by means of hydrogen bonding interactions between surface hydroxyl and phenolic groups of the biomaterial and oxytetracycline. The proposed green and environmentally friendly biomaterial offers potential benefits as a bio-adsorbent in the remediation of aquatic environments contaminated by various organic materials.

Alleviating "inhibited steady-state" in anaerobic digestion of poultry manure by bentonite amendment: Performance evaluation and microbial mechanism

This study systematically evaluated the effects of bentonite as a possible additive to alleviate the "inhibited steady-state" induced by ammonia and acid accumulation during anaerobic digestion. Continuous stirred tank reactors fed with poultry manure were operated at 35 ± 1 °C either with bentonite or not. The results demonstrate that bentonite amendment increased average specific methane production by 35% as suffered from steady-state at an organic loading rate of 6.25 g VS/L·d. 16S rRNA gene amplicon sequencing revealed that the relative abundance of electron-donating Sedimentibacter and Syntrophomonas, and electrophilic Methanosarcina was increased by 110%, 91%, and 49%, respectively. The genera were identified as crucial for alleviating "inhibited steady-state", through establishment of a more robust syntrophic pathway of methanogenic acetate degradation. The enhancement might result from the accelerated electron transfer by bentonite, which is qualified for serving as an exogenetic electron mediator due to containing abundant redox-active metal elements.

Soil Risk Assessment in the Surrounding Area of Hulene-B Waste Dump, Maputo (Mozambique)

Soil contamination in areas close to unplanned dumpsites represents an increasing risk to the ecosystems and human health. This study aimed to evaluate soil quality in the area surrounding the Hulene-B waste dump, Maputo, Mozambique, and to estimate potential ecological and human health risks. A total of 71 surface soil samples were collected in the surrounding area of the dump, along with 10 samples in areas considered not impacted by the dump. Chemical and mineralogical analyses were performed using XRF and XRD. Quartz was the most abundant mineral phase, followed by feldspars, carbonates, clay minerals, and Fe oxides/hydroxides. Results showed a significant contribution to ecological degradation by PTE enrichment, ranked as Zn >> Cu > Cr > Zr > Pb > Ni > Mn. Carcinogenic risk for both children and adults was significant due to Pb soil content. Soil sample concentrations of Cr, Cu, Mn, Ni, Pb, Zn, and Zr, posing a risk especially in children, suggested the need for continuous monitoring, as well as the definition and implementation of mitigation measures.

Solvent-Free Synthesis of MgO-Modified Biochars for Phosphorus Removal from Wastewater

Adsorption is an efficient technology for removing phosphorus from wastewater to control eutrophication. In this work, MgO-modified biochars were synthesized by a solvent-free ball milling method and used to remove phosphorus. The MgO-modified biochars had specific surface areas 20.50–212.65 m² g⁻¹ and pore volume 0.024–0.567 cm³ g⁻¹. The as-prepared 2MgO/BC-450-0.5 had phosphorus adsorption capacities of 171.54 mg g⁻¹ at 25 °C and could remove 100% of phosphorus from livestock wastewater containing 39.51 mg L⁻¹ phosphorus. The kinetic and isotherms studied show that the pseudo-second-order model (R² = 0.999) and Langmuir models (R² = 0.982) could describe the adoption process well. The thermodynamic analysis indicated that the adsorption of phosphorus on the MgO-modified biochars adsorbent was spontaneous and endothermic. The effect of pH, FTIR spectra and XPS spectra studies indicated that the phosphorus adsorption includes a protonation process, electrostatic attraction and precipitation process. This study provides a new strategy for biochar modification via a facile mechanochemical method.

Enhanced Cr(VI) stabilization in soil by chitosan/bentonite composites

In this study, chitosan/bentonite composites (CSBT) was synthesized and applied to the immobilization of chromium in the soil. The influence of passivating agents on various forms of chromium was investigated by batch experiment. The results showed that CSBT could reduce the content of exchangeable form and oxidizable form, while increase the content of residual form of chromium. The addition of 0.2 g·kg^-1 CSBT had the best effect, with the concentration of exchangeable, reducible and oxidizable form decreased by 46.74%, 8.15%, and 14.46%, respectively. During the experiment time, the passivation effect increased rapidly within 14 days, and the content of residual form in the total Cr increased from 0.76% to 14.23%, the equilibrium was reached at the 28th day and was basically maintained in the subsequent period. CSBT had little impact on soil pH, and soil pH maintained constant during the experiment period. The amino, carboxyl and hydroxyl groups of CSBT promoted the conversion of available chromium to residual state in soil, and reduced the bioavailability of chromium in soil.

Identifying adsorption sites for Cd(II) and organic dyes on modified straw materials

Turning agricultural waste into effective remediation materials is a highly promising approach for reducing in-field crop burning and promoting affordable wastewater treatment. This comparative study aims to identify active adsorption sites for methylene blue (MB), crystal violet (CV), and cadmium (Cd) as model pollutants on wheat straw materials modified by a thermal partial-oxidation process. The optimal modification temperature was found to be 160-180 °C for MB and CV adsorption, which is much lower than that of Cd(II) at 220-240 °C. A strong linear correlation exits between total surface group concentrations and Cd(II) uptake, indicating that both acidic and basic functional groups are favourable adsorption sites of Cd(II). By contrast, basic groups generated at higher modification temperatures might have adverse effects on MB and CV adsorption. These results provided mechanistic insights and predictive approach into reuse of agricultural waste for environmental remediation.