Achieving high-performance electrocatalytic reduction of nitrate by N-rich carbon-encapsulated Ni-Cu bimetallic nanoparticles supported nickel foam electrode

Self-supported iron-doped cobalt-copper oxide heterostructures for efficient electrocatalytic denitrification

The electrocatalytic reduction of nitrate ions (NO3-) to nitrogen gas (N2) has emerged as an effective approach for mitigating nitrate pollution in water bodies. However, the development of efficient and highly selective cathode materials remains challenging. Conventional copper-based catalysts often exhibit low selectivity because they strongly adsorb oxygen. In this study, a straightforward solvothermal and pyrolysis method was used to grow iron-doped cobalt-copper oxide heterogeneous structures on copper foam surfaces (Fe-CoO/CuO@CF). Then, the effects of the applied potential, initial NO3- concentration, Cl- concentration, electrolyte pH, and different catalysts on the catalyst performance were investigated. Compared with recently reported congeners, Fe-CoO/CuO@CF is less expensive and exhibits outstanding activity for NO3- reduction. Meanwhile, under a cathode potential of - 1.31 V vs. Ag/AgCl, Fe-CoO/CuO@CF degrades 98.6 % of NO3- in 200 min. In addition, when employing a method inspired by NH4+ removal by breakpoint chlorination, N2 selectivity over Fe-CoO/CuO@CF was raised from 10 % without Cl- to 99.7 % when supplemented with Cl-. The catalyst demonstrated excellent cyclic stability, maintaining a high electrocatalytic activity for the conversion of NO3- to N2 gas over eleven cycles. Moreover, Fe-CoO/CuO@CF enabled 63.7 % removal of NO3- from wastewater (50 mg/L NO3--N) prepared from natural water, with 100 % conversion to N2. Computational studies showed that iron doping decreased the free energy change of the intermediate of NO3- reduction reaction. This study provides an effective strategy for the electrochemical reduction of nitrate to nitrogen gas and offers good prospects for addressing nitrate pollution.

Boosting seawater denitrification in an electrochemical flow cell

Nitrogen compounds in current seawater treatment processes typically are converted to nitrate, threatening seawater quality and marine ecology. Electrochemical denitrification is a promising technique, but its efficiency is severely limited by the presence of excess chloride ions. In this work, a flow-through cell went through an on-demand chlorine-mediated electrochemical-chemical tandem reaction process was designed for efficient seawater denitrification. Equipped with ultrathin cobalt-based nanosheets as the cathode catalyst and commercial IrO2-RuO2/Ti as the anode, the newly designed flow-through cell achieved nitrate removal efficiency that was about 50 times greater than the batch cell and nearly 100 % N2 selectivity. Moreover, nitrite and ammonia can also be removed with over 93 % efficiency in total nitrogen (TN) removal. Furthermore, the concentration of active chlorine in the effluent could be adjusted within two orders of magnitude, enabling on-demand release of active chlorine. Finally, this flow-through cell reduced the TN of actual mariculture tailwater (40.1 mg N L-1 nitrate) to only 5.7 mg N L-1, meeting the discharge standard for aquaculture tailwater of Fujian, China. This work demonstrates the paradigm of deep denitrification from ultra-concentrated chlorine ion wastewater using an on-demand active chlorine-mediated electrochemical-chemical tandem reaction process.

Electrocatalytically active and charged natural chalcopyrite for nitrate-contaminated wastewater purification extended to energy storage Zn-NO3- battery

Charged natural chalcopyrite (CuFeS2, Ncpy) was developed for a three-dimensional electrochemical nitrate reduction (3D ENO3-RR) system with carbon fiber cloth cathode and Ti/IrO2 anode and Zn-NO3- battery. The 3D ENO3-RR system with Ncpy particle electrodes (PEs) possessed superior nitrate removal of 95.6 % and N2 selectivity of 76 % with excellent reusability under a broad pH range of 2-13 involving heterogeneous and homogeneous radical mechanisms. The Zn-NO3- battery with Ncpy cathode delivered an open-circuit voltage of 1.03 V and a cycling stability over 210 h. It was found that Ncpy PEs functioned through self-oxidation, surface dynamic reconstruction (Cu1.02Fe1.0S1.72O1.66 to Cu0.61Fe1.0S0.27O2.98), intrinsic micro-electric field (CuI, S2- anodic and FeIII cathodic poles), and reactive species (•OH, SO4•-, 1O2, •O2- and •H) generation. Computational analyses reveal that CuFeS2(112) surface with the lowest surface energy preferentially exposes Fe and Cu atoms. Cu site is beneficial for reducing NO3- to NO2-, Fe and Fe-Cu dual sites are conducive to N2 selectivity, lowering the overall reaction barriers. It paves the way for selective NO3- reduction in wastewater treatment and can be further extended to energy storage devices by utilizing low-cost Ncpy.

Electrochemical reductive removal of trichloroacetic acids by a three-dimensional binderless carbon nanotubes/ CoP/Co foam electrode: Performance and mechanism

Numerous chlorinated disinfection by-products (DBPs) are produced during the chlorination disinfection of water. Among them, chloroacetic acids (CAAs) are of great concern due to their potential human carcinogenicity. In this study, effective electrocatalytic dechlorination of trichloroacetic acids (TCAA), a typical CAAs, was achieved in the electrochemical system with the three-dimensional (3D) self-supported CoP on cobalt foam modified by carbon nanotubes (CNT/CoP/CF) as the cathode. At a 10 mA cm-2 current density, 74.5% of TCAA (500 μg L-1) was converted into AA within 100 min. In-situ growth of CoP increased the effective electrochemical surface area of the electrode. Electrodeposited CNT promoted electron transfer from the electrode surface to TCAA. Therefore, the production of surface-adsorbed atomic hydrogen (H*) on CNT/CoP/CF was improved, further resulting in excellent electrochemical dechlorination of TCAA. The dechlorination pathway of TCAA proceeded into acetic acids via direct electronic transfer and H*-mediated reduction on CNT/CoP/CF electrode. Additionally, the electroreduction efficiency of CNT/CoP/CF for TCAA exceeded 81.22% even after 20 cycles. The highly efficient TCAA reduction performance (96.57%) in actual water revealed the potential applicability of CNT/CoP/CF in the complex water matrix. This study demonstrated that the CNT/CoP/CF is a promising non-noble metal cathode to remove chlorinated DBPs in practice.

Chlorine-mediated electrochemical advanced oxidation process for ammonia removal: Mechanisms, characteristics and expectation

Chlorine-Mediated Electrochemical Advanced Oxidation (Cl-EAO) technology is a promising approach for ammonia removal from wastewater due to its numerous advantages, including small infrastructure, short processing time, easy operation, high security, and high nitrogen selectivity. This paper provides a review of the ammonia oxidation mechanisms, characteristics, and anticipated applications of Cl-EAO technology. The mechanisms of ammonia oxidation encompass breakpoint chlorination and chlorine radical oxidation, although the contributions of active chlorine, Cl, and ClO remain uncertain. This study critically examines the limitations of existing research and suggests that a combination of determining free radical concentration and simulating a kinetic model would help elucidate the contributions of active chlorine, Cl, and ClO to ammonia oxidation. Furthermore, this review comprehensively summarizes the characteristics of ammonia oxidation, including kinetic properties, influencing factors, products, and electrodes. The amalgamation of Cl-EAO technology with photocatalytic and concentration technologies has the potential to enhance ammonia oxidation efficiency. Future research should concentrate on clarifying the contributions of active chlorine, Cl, and ClO to ammonia oxidation, the production of chloramines and other byproducts, and the development of more efficient anodes for the Cl-EAO process. The main objective of this review is to enhance the understanding of the Cl-EAO process. The findings presented herein contribute to the advancement of Cl-EAO technology and provide a foundation for future studies in this field.

An Integrated Electrochemical System for Synergistic Cathodic Nitrate Reduction and Anodic Sulfite Oxidation

Electrochemical reduction of nitrate has broad application prospects. However, in traditional electrochemical reduction of nitrate, the low value of oxygen produced by the anodic oxygen evolution reaction and the high overpotential limit its application. Seeking a more valuable and faster anodic reaction to form a cathode-anode integrated system with nitrate reaction can effectively accelerate the reaction rate of the cathode and anode, and improve the utilization of electrical energy. Sulfite, as a pollutant after wet desulfurization, has faster reaction kinetics in its oxidation reaction compared to the oxygen evolution reaction. Therefore, this study proposes an integrated cathodic nitrate reduction and anodic sulfite oxidation system. The effect of operating parameters (cathode potential, initial NO₃^--N concentration, and initial SO₃^2--S concentration) on the integrated system was studied. Under the optimal operating parameters, the nitrate reduction rate in the integrated system reached 93.26% within 1 h, and the sulfite oxidation rate reached 94.64%. Compared with the nitrate reduction rate (91.26%) and sulfite oxidation rate (53.33%) in the separate system, the integrated system had a significant synergistic effect. This work provides a reference for solving nitrate and sulfite pollution, and promotes the application and development of electrochemical cathode-anode integrated technology.

In Situ Reconstruction of Metal Oxide Cathodes for Ammonium Generation from High-Strength Nitrate Wastewater: Elucidating the Role of the Substrate in the Performance of Co3O4-x

In situ electrochemical reconstruction is important for transition metal oxides explored as electrocatalysts for electrochemical nitrate reduction reactions (ENRRs). Herein, we report substantial performance enhancement of ammonium generation on Co, Fe, Ni, Cu, Ti, and W oxide-based cathodes upon reconstruction. Among them, the performance of a freestanding ER-Co₃O_4-x/CF (Co₃O₄ grown on Co foil subjected to electrochemical reduction) cathode was superior to its unreconstructed counterpart and other cathodes; e.g., an ammonium yield of 0.46 mmol h^-1 cm^-2, an ammonium selectivity of 100%, and a Faradaic efficiency of 99.9% were attained at -1.3 V in a 1400 mg L^-1 NO₃^--N solution. The reconstruction behaviors were found to vary with the underlying substrate. The inert carbon cloth only acted as a supporting matrix for immobilizing Co₃O₄, without appreciable electronic interactions between them. A combination of physicochemical characterizations and theoretical modeling provided compelling evidence that the CF-promoted self-reconstruction of Co₃O₄ induced the evolution of metallic Co and the creation of oxygen vacancies, which promoted and optimized interfacial nitrate adsorption and water dissociation, thus boosting the ENRR performance. The ER-Co₃O_4-x/CF cathode performed well over wide ranges of pH and applied current and at high nitrate loadings, ensuring its high efficacy in treating high-strength real wastewater.