Electrochemical reductive removal of trichloroacetic acids by a three-dimensional binderless carbon nanotubes/ CoP/Co foam electrode: Performance and mechanism

Numerous chlorinated disinfection by-products (DBPs) are produced during the chlorination disinfection of water. Among them, chloroacetic acids (CAAs) are of great concern due to their potential human carcinogenicity. In this study, effective electrocatalytic dechlorination of trichloroacetic acids (TCAA), a typical CAAs, was achieved in the electrochemical system with the three-dimensional (3D) self-supported CoP on cobalt foam modified by carbon nanotubes (CNT/CoP/CF) as the cathode. At a 10 mA cm-2 current density, 74.5% of TCAA (500 μg L-1) was converted into AA within 100 min. In-situ growth of CoP increased the effective electrochemical surface area of the electrode. Electrodeposited CNT promoted electron transfer from the electrode surface to TCAA. Therefore, the production of surface-adsorbed atomic hydrogen (H*) on CNT/CoP/CF was improved, further resulting in excellent electrochemical dechlorination of TCAA. The dechlorination pathway of TCAA proceeded into acetic acids via direct electronic transfer and H*-mediated reduction on CNT/CoP/CF electrode. Additionally, the electroreduction efficiency of CNT/CoP/CF for TCAA exceeded 81.22% even after 20 cycles. The highly efficient TCAA reduction performance (96.57%) in actual water revealed the potential applicability of CNT/CoP/CF in the complex water matrix. This study demonstrated that the CNT/CoP/CF is a promising non-noble metal cathode to remove chlorinated DBPs in practice.

Electrochemically selective ammonium recovery from wastewater via coupling hydrogen bonding and charge storage

Electrochemical ammonium (NH4+) storage (EAS) has been established as an efficient technology for NH4+ recovery from wastewater. However, there are scientific difficulties unsolved regarding low storage capacity and selectivity, restricting its extensive engineering applications. In this work, electrochemically selective NH4+ recovery from wastewater was achieved by coupling hydrogen bonding and charge storage with self-assembled bi-layer composite electrode (GO/V2O5). The NH4+ storage was as high as 234.7 mg N g-1 (> 102 times higher than conventional activated carbon). Three chains of proof were furnished to elucidate the intrinsic mechanisms for such superior performance. Density functional theory (DFT) showed that an excellent electron-donating ability for NH4+ (0.08) and decrease of diffusion barrier (22.3 %) facilitated NH4+ diffusion onto electrode interface. Physio- and electro-chemical results indicated that an increase of interlamellar spacing (14.3 %) and electrochemical active surface area (ECSA, 388.9 %) after the introduction of GO were responsible for providing greater channels and sites toward NH4+ insertion. Both non-ionic chemical-bonding (V5+=O‧‧‧H, hydrogen-bonding) and charge storage were contributed to the higher capacity and selectivity for NH4+. This work offers underlying guideline for exploitation a storage manner for NH4+ recovery from wastewater.

Evaluating the role of salinity in enhanced biogas production from two-stage anaerobic digestion of food waste by zero-valent iron

Salts including NaCl are the most common food flavoring agents so they are often accumulated in food waste (FW) and have potential impact on anaerobic digestion (AD) of FW. In this study, the enhanced biogas production from two-stage anaerobic digestion (TSAD) of FW by microscale zero-valent iron (ZVI) under different salinity (3, 6, 9, and 15 g NaCl/L) was evaluated. Under salinity stress, ZVI becomes a continue-release electron donor due to the enhanced corrosion and dissolution effect and the slow-down surface passivation, further improving the performance of TSAD. Experimental results revealed that the biogas production including H2 and CH4 from TSAD with 10 g/L ZVI addition was promoted under salinity stress. The maximum H2 and CH4 yield (303.38 mL H2/g-VS and 253.84 mL CH4/g-VS) were observed at the salinity 9 g NaCl/L. Compared with that of zero salinity, they increased by 40.94% and 318.46%, respectively. Additionally, Sedimentibacter, an exoelectrogen that can participate in the direct interspecies electron transfer, also exhibited the highest relative abundance (34.96%) at the salinity 9 g NaCl/L. These findings obtained in this study might be of great importance for understanding the influence of salinity on the enhanced AD by ZVI.

Metformin reduces decline in the estimated glomerular filtration rate during progression of autosomal dominant polycystic kidney disease: a systematic review and meta-analysis

OBJECTIVE

A meta-analysis (MA) was carried out to examine the influence of metformin on autosomal dominant polycystic kidney disease (ADPKD) patient prognosis.

MATERIALS AND METHODS

We reviewed and examined scientific articles from PubMed, Clinicalkey, Google Scholar, Medline, Embase, and Cochrane from the initiation date till June 2023 to identify investigations that examined metformin performance in managing ADPKD. Among the employed search terminology, we searched for terms such as "metformin" and "ADPKD". MA was conducted using the Cochrane Collaboration's RevMan version 5.3.0 (The Cochrane Collaboration, Oxford, UK).

RESULTS

We identified 4 investigations, with 164 total subjects who fulfilled our inclusion criteria. The experimental cohort displayed a marked reduction in the decline of estimated glomerular filtration rate (eGFR) relative to controls [mean difference (MD) = 2.31, 95% confidence interval (CI) = 0.82-3.79, p = 0.002]. We observed no obvious difference in the height-adjusted total kidney volume alteration, gastrointestinal side effects, and hypoglycemia between the two cohorts.

CONCLUSIONS

Metformin was easily tolerable and safe and substantially reduced the eGFR decline among ADPKD patients. Moreover, although metformin-treated patients were more likely to suffer gastrointestinal adverse events, we observed no discernible difference between the two cohorts.

[Clinical diagnosis and treatment of multiple pulmonary nodules]

CT screening has markedly reduced the lung cancer mortality in high-risk population and increased the detection of early-stage pulmonary neoplasms, including multiple pulmonary nodules, especially those with a ground-glass appearance on CT. Multiple primary lung cancer (MPLC) constitutes a specific subtype of lung cancer with indolent biological behaviors, which is predominantly early-stage adenocarcinoma. Although MPLC progresses slowly with rare lymphatic metastasis, existence of synchronous lesions and distributed location of these nodules still pose difficulty for the management of such patients. One single operation is usually insufficient to eradicate all neoplastic lesions, whereas repeated surgical procedures bring about another dilemma: whether clinical benefits of surgical treatment outweigh loss of pulmonary function following multiple operations. Therefore, despite the anxiety for treatment among MPLC patients, whether and how to treat the patient should be assessed meticulously. Currently there is a heated discussion upon the timing of clinical intervention, operation mode and the application of local therapy in MPLC. Based on clinical experience of our multiple disciplinary team, we have summarized and commented on the evaluation, surgical treatment, non-surgical local treatment, targeted therapy and immunotherapy of MPLC in this article to provide further insight into this field.

Electrocatalytic reduction of nitrate by carbon encapsulated Cu-Fe electroactive nanocatalysts on Ni foam

Electrocatalytic denitrification is an attractive and effective method for complete elimination of nitrate (NO₃^-). However, its application is limited by the activity and stability of the electrocatalyst. In this work, a novel bimetallic electrode was synthesized, in which N-doped graphitized carbon sealed with Cu and Fe nanoparticles and immobilized them on nickel foam (CuFe NPs@NC/NF) without any chemical binder. The immobilized Cu-Fe nanoparticles not only facilitated the adsorption of the reactant but also enhanced the electron transfer between the cathode and NO₃^-, thus promoting the electrochemical reduction of NO₃^-. Therefore, the as-prepared electrode exhibited enhanced electrocatalytic activity for NO₃^- reduction. The composite electrode with the Cu/Fe molar ratio of 1:2 achieved the highest NO₃^- removal (79.4 %) and the lowest energy consumption (0.0023 kW h mg^-1). Furthermore, the composite electrode had a robust NO₃^- removal capacity under various conditions. Benefitting from the electrochlorination on the anode, this electrochemical system achieved nitrogen (N₂) selectivity of 94.0 %. Moreover, CuFe NPs@NC/NF exhibited good stability after 15 cycles, which should be attributed to the graphitized carbon layer. This study confirmed that CuFe NPs@NC/NF electrode is a promising and inexpensive electrode with long-term stability for electrocatalytic denitrification.

Zirconium-modified biochar as the efficient adsorbent for low-concentration phosphate: performance and mechanism

Achieving advanced treatment of phosphorus (P) to prevent water eutrophication and meet increasingly stringent wastewater discharge standard is an important goal of water management. In this study, a low-cost, high-efficiency phosphate adsorbent zirconium-modified biochar (ZrBC) was successfully synthesized through co-precipitation method, in which the biochar was prepared from the pyrolysis of peanut shell powder. ZrBC exhibited strong adsorption ability to low-concentration phosphate (< 1 mg·L^-1) in water, and the phosphate removal reached 100% at the investigated dosage range (0.1-1.0 mg·L^-1). The adsorption process could be described well by pseudo-second-order model and Langmuir isotherm model, indicating that the phosphate adsorption by ZrBC was mainly a chemical adsorption and single-layer adsorption process. The calculated static maximum phosphate adsorption capacity was 58.93 mg·g^-1 at 25 °C. The ligand exchange between surface hydroxyl groups and phosphate was the main mechanism for the phosphate adsorption on ZrBC. The presence of coexisting anions except for SO₄^2- had little effect on the phosphate removal. At the column experiment, ZrBC showed superior treatment capacities for simulated secondary effluents and the breakthrough time for 0.5 mg·L^-1 effluent phosphate concentration reached 190 h. ZrBC highlights the potential as an effective and environment-friendly adsorbent for the removal of low-concentration phosphate from secondary effluents of municipal wastewater treatment plants (WWTPs).

Achieving high-performance electrocatalytic reduction of nitrate by N-rich carbon-encapsulated Ni-Cu bimetallic nanoparticles supported nickel foam electrode

The cathode with low-energy consumption and long-term stability is pivotal to achieve the conversion of nitrate (NO₃^-) to nitrogen (N₂) by electrocatalytic denitrification. Herein, a binder-free electrode was synthesized by directly immobilizing N-doped graphitized carbon layer-encapsulated NiCu bimetallic nanoparticles on nickel foam (NF) (NiCu@N-C/NF) and served as the cathode for electrocatalytic NO₃^- reduction. Morphological characterization indicated that Ni and Cu nanoparticles were encapsulated by the N-doped graphitized carbon layer and well-dispersed on the surface of NF. Compared with monometallic composite cathode (Cu@N-C/NF and Ni@N-C/NF), NiCu@N-C/NF exhibited better NO₃^- removal performance (98.63 %) and lower energy consumption (0.007 kW·h mmol^-1), which should be attributed to its strong adsorption ability to NO₃^- and excellent electron transfer property. Meanwhile, its electrocatalytic performance could be maintained in wide initial NO₃^- concentration (1.79-7.14 mM) and solution pH (3-11). With the assistance of electrochlorination, the N₂ selectivity of electrochemical system was up to 99.89 % in the presence of 0.028 M Cl^-. More importantly, NiCu@N-C/NF electrode displayed an ultra-high stability during ten recycling experiments. This study indicated that the binderless composite cathode NiCu@N-C/NF had great potential in electrocatalytic NO₃^- removal from wastewater.

Sulfide enhances the Fe(II)/Fe(III) cycle in Fe(III)-peroxymonosulfate system for rapid removal of organic contaminants: Treatment efficiency, kinetics and mechanism

The activation of peroxymonosulfate (PMS) by Fe(II) or Fe(III) for environmental decontamination is severely limited by the low conversion rate from Fe(III) to Fe(II). Here, we found that this puzzling problem could virtually be solved by introducing trace amounts of S^2-. With the addition of 0.2 mM S^2-, the bisphenol A (BPA) degradation efficiency and total organic carbon (TOC) removal in PMS/Fe(III) system were improved by 3.8 and 6.0 times, respectively. Meanwhile, the k_obs and PMS utilization efficiency also markedly increased by 650% and 160%, respectively. The constructed PMS/Fe(III)/S^2- system exhibited a good applicability to a wide pH range (3.2 ~ 9.5) and high resistance to humic acid, Cl^- and NO₃^-. The main reactive oxidant species in PMS/Fe(III)/S^2- system were identified by scavenging experiments, electron paramagnetic resonance measurement, chemical probe approach, and ¹⁸O isotope-labeling technique. The identification results revealed that Fe^IVO²⁺ was the primary reactive oxidant species, while •OH, SO₄^•-, O₂^•- and ¹O₂ were also involved in the degradation of BPA. Finally, the generalizability of PMS/Fe(III)/S^2- system was evaluated by varying the target pollutants, oxidants, and reducing S species. The construction of PMS/Fe(III)/S^2- system provides some insights into the treatment of organic wastewaters containing S^2-, e.g., from refineries and tanneries.

POS0962 CAN RADIOMICS REPLACE SPARCC SCORING SYSTEM IN EVALUATING BONE MARROW OEDEMA OF THE SACROILIAC JOINTS IN AXIAL SPONDYLOARTHRITIS?

Background

Bone marrow oedema (BMO) of the sacroiliac joints (SIJs) is evaluated to diagnose, classify and monitor disease activity in patients with axial spondyloarthritis (axSpA). Available quantitative methodologies rely on human visual assessment, and errors can’t be completely avoided. Radiomics can extract and select discriminative and quantified features from regions of interest (ROIs), making a more accurate and objective description of BMO.

Objectives

To develop a more objective and efficient method based on radiomics to evaluate BMO of the SIJs by magnetic resonance imaging (MRI) in patients with axSpA in comparison with Spondyloarthritis Research Consortium of Canada (SPARCC) scoring system.

Methods

From September 2013 to July 2021, 523 patients with axSpA underwent 3.0T SIJ-MRI were included, who were randomly classified as training cohort(n=367) and validation cohort(n=156). The optimal radiomics features, selected from the 3.0T SIJ-MRI in the training cohort, were included to build the radiomics model. Four clinical risk predictors were adopted to build the clinical model. The performance of the clinical and radiomics models was evaluated by ROC analysis and decision curve analysis (DCA). Rad-scores were calculated by the radiomics model and SPARCC scores were performed to quantify the BMO of SIJs. We also assessed the correlation between Rad-score and SPARCC score.

Results

The radiomics model, built by 15 optimal features, showed favorable discrimination about SPARCC score <2 or ≥2 both in the training (AUC, 0.91; 95% CI: 0.88-0.94) and the validation cohort (AUC, 0.89; 95% CI, 0.84-0.94). DCA confirmed that the radiomics model was clinically useful. Furthermore, Rad-score has significant correlation with SPARCC score for scoring the status of BMO (rs=0.78, P< 0.001), and moderation correlation for scoring the change (r=0.40, P=0.005).

Conclusion

The radiomics can accurately assess the BMO of the SIJs in axSpA, providing an alternative to SPARCC scoring system. There was a positive correlation between Rad-score and SPARCC score.

References

[1]van der Heijde D, Sieper J, Maksymowych WP, Lambert RG, Chen S, Hojnik M, et al. Clinical and MRI remission in patients with nonradiographic axial spondyloarthritis who received long-term open-label adalimumab treatment: 3-year results of the ABILITY-1 trial. Arthritis Res Ther. 2018;20(1):61.

[2]Landewé RB, Hermann KG, van der Heijde DM, Baraliakos X, Jurik AG, Lambert RG, et al. Scoring sacroiliac joints by magnetic resonance imaging. A multiple-reader reliability experiment. The Journal of rheumatology. 2005;32(10):2050-5.

[3]Cereser L, Zabotti A, Zancan G, Quartuccio L, Cicciò C, Giovannini I, et al. Magnetic resonance imaging assessment of ASAS-defined active sacroiliitis in patients with inflammatory back pain and suspected axial spondyloarthritis: a study of reliability. Clinical and experimental rheumatology. 2021.

[4]Maksymowych WP, Inman RD, Salonen D, Dhillon SS, Williams M, Stone M, et al. Spondyloarthritis research Consortium of Canada magnetic resonance imaging index for assessment of sacroiliac joint inflammation in ankylosing spondylitis. Arthritis Rheum. 2005;53(5):703-9.

[5]Gillies RJ, Kinahan PE, Hricak H. Radiomics: Images Are More than Pictures, They Are Data. Radiology. 2016;278(2):563-77.

Table 1.

Rad-scores corresponding to different SPARCC score intervals about the status of SIJ-BMO.

SPARCC scorenRad-scoreMean(sd)Median (iqr)Range0-1170-1.31(1.64)-1.39(2.16)-6.46, 2.352-61250.73(1.86)0.62(2.12)-3.08, 8.487-11552.25(1.80)2.36(1.79)-1.17, 8.3612-16432.65(2.14)2.66(3.21)-0.76, 7.3917-21383.31(2.05)3.25(2.88)-0.88, 7.5522-26263.08(1.55)3.38(2.12)-1.00, 5.3827-31253.77(1.36)3.77(1.59)0.40, 6.27>31414.10(1.51)4.32(2.28)1.00, 6.96

Disclosure of Interests

None declared

Peroxymonosulfate (PMS) activation by mackinawite for the degradation of organic pollutants: Underappreciated role of dissolved sulfur derivatives

The internal Fe²⁺/Fe³⁺ cycle is important for peroxymonosulfate (PMS) activation by iron-based materials to produce the reactive oxidative species (ROS) for the breakdown of organic contaminants. Previous studies have focused on the contribution of heterogeneous sulfur species to the Fe²⁺/Fe³⁺ cycle such as lattice S(-II) and surface SO₃^2- of iron sulfides. In this study, we found that the dissolved S(-II) from mackinawite (FeS) had a substantial contribution to the Fe²⁺/Fe³⁺ cycle. Furthermore, the oxidation intermediates of the dissolved S(-II) such as S₂O₃^2- and SO₃^2- ions could convert Fe³⁺ to Fe²⁺ in solution. The elimination of target organic pollutant bisphenol A (BPA) derived from PMS activation triggered by the dissolved Fe²⁺ might be enhanced by the equivalent dissolved S(-II) in the FeS/PMS system. These results revealed that previous studies underestimated the significance of PMS activation by dissolved Fe²⁺ of iron sulfides to organic pollutant degradation. Moreover, SO₄^•- and •OH were more likely to be the main ROS for BPA degradation in the FeS/PMS system compared with FeO²⁺. Considering that the metal sulfides have been widely used to activate PMS, H₂O₂ and peroxydisulfate, this study offers a new perspective on the function of sulfur in these advanced oxidation processes.

Age and Sex Differences in the Association of Sleep Duration and Overweight/Obesity among Chinese Participants Age above 45 Years: A Cohort Study

OBJECTIVES

We aimed to evaluate the association between sleep duration and obesity and estimate the attributable risk of sleep in the China Health and Retirement Longitudinal Study surveys (CHARLS).

METHODS

A total of 9061 adults aged 45 years above from CHARLS (2011-2015) were included. The main outcome of this study was incident overweight/obesity specific to general and abdominal obesity. Overweight/obesity was defined as BMI ≥ 23.0 (kg/m2) and BMI≥27.5 (kg/m2), respectively. Abdominal obesity was defined as waist circumference ≥90 cm for men and ≥80 cm for women. Self-reported sleep durations were obtained using a structured questionnaire. We assessed hazard ratios (HRs) and 95% confidence intervals (CIs) as well as the population attributable fraction (PAF) for associations between sleep duration and obesity.

RESULTS

986 and 606 participants were identified as overweight and general obesity respectively, 1253 experienced abdominal obesity events. In multivariable-adjusted models, participants with daytime sleep of 0-30 minutes and more than 30 minutes associated with 30% (HR: 0.70, 95% CI: 0.56-0.87) and 35% (HR: 0.65, 95% CI: 0.55-0.78) decreased incident overweight risk respectively compared to those having no daytime sleep, this association also found among females and middle-aged, not males or elderly. Similarly, 0-30 minutes (HR: 0.68, 95% CI: 0.48-0.96) and more than 30 minutes of daytime sleep (HR: 0.73, 95% CI: 0.59-0.91) were associated with a reduced risk of abdominal obesity, similar results also found among females and middle-aged. Compared with 7-9 hours of nocturnal sleep, people who slept 5-7 hours had a reduced risk of overweight (HR: 0.59, 95% CI=0.47-0.74),but not found in subgroups. The hazard role of long nocturnal sleep for abdominal obesity was only found among elderly (HR: 2.33, 95% CI=1.35-4.04) and males (HR: 2.24, 95% CI=1.17-4.29). Compared with moderate total sleepers (7-9hours/day), participants with short total sleep duration exhibited an elevated risk of overweight (HR: 1.13, 95% CI=1.00-1.28), this also found among middle-aged. The PAF for inadequate total sleep duration (<7 hours/day) was 10.77% for overweight individuals.

CONCLUSIONS

Insufficient sleep duration was associated with an elevated risk of overweight only detected among middle-aged not elderly and other subgroups specific by age. The risks for abdominal obesity were increased for males and middle-aged with long nocturnal sleep. Daytime sleep may significantly reduce the risk of overweight and abdominal obesity in female and middle-aged individuals. The link between sleep duration and obesity requires further study.

2D/2D FeNi-layered double hydroxide/bimetal-MOFs nanosheets for enhanced photo-Fenton degradation of antibiotics: Performance and synergetic degradation mechanism

The photo-Fenton system exhibits great potential in environmental remediation. However, photo-Fenton process suffers from slow reaction kinetics, which is caused by the low yield of available charge carriers and active radicals. In this work, the 2D/2D FeNi-layered double hydroxide/bimetal-organic frameworks nanosheets (FeNi-LDH/BMNSs) photocatalyst was fabricated via an in-situ semi-sacrificial template strategy. The optimized FeNi-LDH/BMNSs + H₂O₂+Vis system showed excellent tetracycline hydrochloride (TC-HCl) removal rate of 95.76% in 60 min. Besides, the high TC-HCl degradation rates (above 80%) are obtained in a wide pH range and the total organic carbon (TOC) removal rate of 48.98% was remained after four cycles. Experiments and characterizations identified the fast catalysis process were ascribed to the synergetic effect between 2D/2D heterojunctions and Lewis acid sites with mixed-valence (Fe (III)/Ni (II)) in FeNi-LDH/BMNSs. As a result, the catalysis of H₂O₂ and the reduction of O₂ was accelerated by the continuous generation of Fe (II) and available photogenerated electrons, respectively, producing abundant active radicals including OH and O₂^-. Finally, this photo-Fenton system exhibited high removal rate to oxycycline, levofloxacin, norfloxacin and doxycycline and showed excellent performance for TC-HCl removal in different composed wastewater. The findings provide a new strategy towards creating 2D/2D active heterogeneous catalysts for photo-Fenton catalytic application.

FABP4 inhibitor attenuates inflammation and endoplasmic reticulum stress of islet in leptin receptor knockout rats

OBJECTIVE

Metabolic syndrome is characterized by abdominal obesity, hypertriglyceridemia and hyperglycemia. Fatty acid binding protein 4 (FABP4), as a member of intracellular lipid chaperones, is not only engaged in lipid transport but involved in inflammation and insulin resistance. The present study was to investigate the effects of BMS309403, a specific FABP4 inhibitor, on metabolic syndrome and its possible molecular mechanisms in islets.

MATERIALS AND METHODS

Leptin receptor knockout (Lepr-/-) rat, a novel and representative animal model of metabolic syndrome, was adopted in this study. Lepr-/- male rats and their wild littermates were grouped and intragastrically administered with BMS309403. Glucose Tolerance Test (GTT) and Insulin Tolerance Test (ITT) were performed on all rats. Serum insulin was detected by ELISA. The metabolic characters, as well as liver and kidney functions, were evaluated by serum biochemical assay. Immunohistochemistry and Western blot were adopted to detect the expression levels of FABP4, CD68, GRP78, ATF6, p-IRE1a, and Cleaved caspase-3.

RESULTS

Lepr-/- rats showed prominent characteristics of metabolic syndrome with increased FABP4, inflammatory infiltration, ER stress and apoptosis in islets. BMS309403 administration attenuated inflammation, ER stress and apoptosis in Lepr-/- rat islets while stimulating insulin secretion as well as improving manifestation of metabolic syndrome without hepatic and renal toxicity.

CONCLUSIONS

FABP4 increased in Lepr-/- rat islets and might be involved in the regulation of islet inflammation and apoptosis via ER stress. FABP4 inhibitor BMS309403 could ameliorate islet inflammation and apoptosis in metabolic syndrome through suppressing ER stress.

Highly selective electrochemical nitrate reduction using copper phosphide self-supported copper foam electrode: Performance, mechanism, and application

A highly active and selective electrode is essential in electrochemical denitrification. Although the emerging Cu-based electrode has attracted intensive attentions in electrochemical NO₃^- reduction, the issues such as restricted activity and selectivity are still unresolved. In our work, a binder-free composite electrode (Cu₃P/CF) was first prepared by direct growth of copper phosphide on copper foam and then applied to electrochemical NO₃^- reduction. The resulting Cu₃P/CF electrode showed enhanced electrochemical performance for NO₃^- reduction (84.3%) with high N₂ selectivity (98.01%) under the initial conditions of 1500 mg L^-1 Cl^- and 50 mg N L^-1 NO₃^-. The cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) demonstrated that electrochemical NO₃^- reduction was achieved through electron transfer between NO₃^- and Cu⁰ originated from CF. The in-situ grown Cu₃P served as the bifunctional catalyst, the electron mediator or bridge to facilitate the electron-transfer for NO₃^- reduction and the stable catalyst to produce atomic H* toward NO₂^- conversion. Meanwhile, the Cu₃P/CF remained its electrocatalytic activity even after eight cyclic experiments. Finally, a 2-stage treatment strategy, pre-oxidation by Ir-Ru/Ti anode and post-reduction by Cu₃P/CF cathode, was designed for electrochemical chemical oxygen demand (COD) and total nitrogen (TN) removal from real wastewater.

Electro-assisted autohydrogenotrophic reduction of perchlorate and microbial community in a dual-chamber biofilm-electrode reactor

The electro-assisted autohydrogenotrophic reduction of perchlorate (ClO₄^-) was investigated in a dual-chamber biofilm-electrode reactor (BER), in which the microbial community was inoculated from natural sediments. To avoid the effect of extreme pH and direct electron transfer on perchlorate reduction, a novel cathode configuration was designed. The pH of the cathode compartment was successfully controlled in the range of 7.2-8.4 during whole experiment. The effective biological autohydrogenotrophic reduction of perchlorate was achieved using hydrogen generated in-situ on the electrode surface, and the removal rate of 10 mg L^-1 perchlorate reached 98.16% at HRT of 48 h. The highest perchlorate removal flux reached to 1498.420 mg m^-2·d^-1 with a 0.410 kW·h g-perchlorate^-1 energy consumption. The microbial community evolution in the BER was determined by high-throughput sequencing and the results indicated that the Firmicutes and Bacteroidetes were dominant at phylum level when perchlorate concentration was 10 mg L^-1 or lower. And the Proteobacteria became ascendant at the perchlorate concentration of 20 mg L^-1. The functional populations for perchlorate reduction were successfully enriched including Nitrosomonas (30%), Thermomonas (9%), Comamonas (8%) and Hydrogenophaga (3%). Meanwhile, the proportion of functional population in biofilm linked to perchlorate concentration. With the increase of influent perchlorate concentration, the perchlorate-reducing bacteria (PRB) were enriched successfully and became ascendant.

Electrochemical Cr(VI) removal from aqueous media using titanium as anode: Simultaneous indirect electrochemical reduction of Cr(VI) and in-situ precipitation of Cr(III)

In this work, a novel method for complete Cr(Ⅵ) removal was achieved in a single-chamber cell with titanium (Ti) as anode via simultaneous indirect electro-reduction of Cr(Ⅵ) and in-situ precipitation of Cr(Ⅲ). The Cr(Ⅵ) and total Cr removal, and electric energy consumption were optimized as a function of electrochemical reactor, current density, initial Cr(Ⅵ) and chloride (Cl^-) concentration, and initial solution pH. The maximum Cr(Ⅵ) and total Cr removal efficiency reached 80.5 and 79.4% respectively within 12 h at current density of 10 mA cm^-2 as initial Cr(Ⅵ) concentration was 0.078 mM. Decreasing the initial solution pH was beneficial to Cr(Ⅵ) reduction, but Cr(Ⅲ) precipitation was inhibited, resulting in the poor total Cr removal. The suitable Cl^- concentration guaranteed sufficient reducing agents (Ti³⁺ and Ti²⁺) for Cr(Ⅵ) removal. The reaction mechanism demonstrated that Ti anode could be corroded to produce Ti³⁺ and Ti²⁺, which provided the electrons for reduction of Cr(Ⅵ) to Cr(Ⅲ). Simultaneously, the solid products (Ti₂O_(6x-y-z+52)Cl_2yCr_2x(OH)_2z(s)) were in-situ formed and precipitated from the solution due to the continuous generation of hydroxyl ion (OH^-) from cathode. This study might provide a new electrochemical method with non-precious metal as the electrode for complete Cr(Ⅵ) removal from aqueous media.

Enhanced anaerobic co-digestion of waste activated sludge and food waste by sulfidated microscale zerovalent iron: Insights in direct interspecies electron transfer mechanism

The enhancement of zerovalent iron (ZVI) on anaerobic digestion (AD) has been proved, but there are still some problems that constrain the large-scale application of ZVI, such as the destruction of cell membrane and the inhibition of methanogenesis led by rapid H₂ accumulation. Aiming at these problems, sulfidated microscale zerovalent iron (S-mZVI) was employed to evaluate its effect on anaerobic co-digestion (AcoD) of waste activated sludge (WAS) and food waste (FW). Experimental results showed that S-mZVI promoted the direct interspecies electron transfer (DIET) between specific bacteria and methanogens, resulting in higher methane yield. At S-mZVI 10 g/L, the cumulative methane yield and ETS activity reached 264.78 mL/g-VS and 24.62 mg INTF/(g-TS h), which was 1.33 and 1.83 times that of blank. Microbiological analysis demonstrated that the abundance of DIET-related microorganisms such as Syntrophomonas, Methanosarcina and Methanobacterium increased with the increasing dosage of S-mZVI.

Synergistic adsorption and electrocatalytic reduction of bromate by Pd/N-doped loofah sponge-derived biochar electrode

In this work, a novel Pd/N-doped loofah sponge-derived biochar (Pd/NLSBC) material with three-dimensional (3D) network structure was prepared through the carbonization-impregnation method and applied as cathode for electrocatalytic bromate removal. The N-doped biochar not only increased the adsorption capacity of electrode, but also facilitated electron transfer, subsequently resulting in the high electrocatalytic activity for bromate removal. The results indicated higher bromate adsorption capacity of Pd/NLSBC electrode was favorable to the electrocatalytic bromate removal. The influences of significant operating factors including calcination temperature, initial solution pH, applied current intensity, and initial bromate concentration on electrocatalytic bromate removal were also optimized. Under the current intensity of 10 mA, Pd/NLSBC-800 exhibited the highest bromate removal efficiency (96.7 %) and the bromide conversion rate reached almost 100 % at the initial bromate concentration of 0.781 μmol L^-1. This process could be effectively performed over a wide range of pH (2.0-9.0) and be well fitted to the pseudo-first-order kinetic model under different conditions. The reaction mechanism study indicated that both direct electron transfer and indirect reduction by the active hydrogen atom (H*) contributed to the elctrocatalytic bromate removal. Meanwhile, Pd/NLSBC-800 electrode could maintain its high electrocatalytic activity for bromate removal after five cycles.

Influence of low voltage electric field stimulation on hydrogen generation from anaerobic digestion of waste activated sludge

Low voltage electric field is an important stimulation condition for biochemical metabolic of microorganism. But few literatures were available related to the effect of low voltage electric field on hydrogen production from anaerobic digestion of waste activated sludge (WAS). This study aims to explore such influencing thus carried a series experiments under 35 ± 1 °C and pH 7.0 ± 0.2. The experimental results showed that the hydrogen production increased from 28.1 to 32.5 mL/g VSS with electric field strengthening from 0 to 40 V/m. The mechanism explorations revealed that the yield of volatile fatty acids (VFAs) yield could reach 1.16-fold of control group when the highest-level electric field (40 V/m) forced in the anaerobic fermentation system with dextran as model substrate. Further analysis of relative activities of functional enzymes, such as NADH, acetate kinase, butyrate kinase and OAATC, showed that it was promoted by electric field stimulation as 2.09, 1.52, 1.28 and 1.16-fold of the control test, respectively. Meanwhile, the conductivity of fermentation liquor in presence of low voltage electric field stimulation increased 83% compared with the control group. This work verified the promotion of low voltage electric field stimulation on hydrogen production from anaerobic digestion of WAS and might provide a new sight for the green energy generation.

The effects of thiosulfinates on methane production from anaerobic co-digestion of waste activated sludge and food waste and mitigate method

Thiosulfinates, a natural antibiotic, existed in all parts of Allium, therefore might be accumulated in large amounts in food waste (FW). FW was often added into waste activated sludge (WAS) anaerobic digestion process as a kind of supplement for nutrition balance. However, the impact of thiosulfinates on methane production and the possible approach to mitigate its inhibition on the co-digestion process could be available in few literatures. This work was carried out in a series of batch experiment at pH 7.0 ± 0.2 and 35 ± 1.0 ℃ to promote the further understanding of this process. The experimental results showed that the methane accumulation decreased from 270.6 ± 13.4 to 16.7 ± 7.0 mL/g VSS (volatile suspended solids) when the initial concentration of thiosulfinates increased from 0 to 2.5 μg/g VSS. The activities of functional enzymes (F₄₂₀ and CoM) were inhibited by 99.06% and 99.82% compared with control group when reactor contained 2.5 μg/g VSS thiosulfinates. Furthermore, different temperature, pH, and combination pretreat were applied to impair the inhibition of thiosulfinate. Compared with no pretreatment group, methane yield was increased by 2.26, 32.18 and 42.2-fold, respectively which group was under pretreatment method of heat (100 ℃), alkali (pH 9) and combination.

The inhibitory effect of thiosulfinate on volatile fatty acid and hydrogen production from anaerobic co-fermentation of food waste and waste activated sludge

Thiosulfinate, a nature antibiotic, existed in all parts of Allium thereby accumulating in kitchen waste vastly. However, few literatures were available related to its influence on volatile fatty acids (VFA) and hydrogen production when kitchen waste digestion technology was applied. This study aimed to explore the inhibitory effect and the relevant mechanism. Experimental results showed that the hydrogen accumulation decreased from 23.2 ± 0.8 to 8.2 ± 0.1 mL/g VSS (volatile suspended solid) and maximal total VFA yield decreased from 765.7 ± 21.2 to 376.4 ± 21.7 mg COD (chemical oxygen demand)/g VSS when the dosage of thiosulfinate increased from 0 to 12.5 µg/g VSS. The mechanism study indicated, compared with control group, that the butyric acid decreased from 59% to 20.1% of total VFA yield when reactor in present of 12.5 µg/g VSS thiosulfinate. Moreover, the relative activities of functional enzymes were inhibited 73.4% (butyryl-CoA) and 72.7% (NADH), respectively.

Evaluating the effect of biochar on mesophilic anaerobic digestion of waste activated sludge and microbial diversity

This study compared the effects of sewage sludge-derived pyrochar (PC300, PC500, and PC700) and hydrochar (HC180, HC240, and HC300) on mesophilic anaerobic digestion of waste activated sludge (WAS). It was demonstrated that hydrochar can better promote the methane production compared with pyrochar. The highest accumulative methane yield of 132.04 ± 4.41 mL/g VS_added was obtained with HC180 addition. In contrast, the PC500 and PC700 showed a slightly negative effect on methane production. Sludge-derived HC not only accelerated the solubilization and hydrolysis of sludge floc, but also improved the production of acetic acid and propionate, further resulting in improved methane production. Simultaneously, the syntrophic microbes facilitating direct interspecies electron transfer (DIET) such as Syntrophomonas, Peptococcaceae, Methanosaeta and Methanobacterium bred rapidly with the addition of HCs. These results indicated that the hydrochar is more ideal as the accelerant to promote the methane production from mesophilic anaerobic digestion of WAS than the pyrochar.

Indirect electrochemical reduction of nitrate in water using zero-valent titanium anode: Factors, kinetics, and mechanism

In this study, indirect electrochemical reduction with zero-valent titanium (ZVT) as anode successfully achieved the selective nitrate removal from simulated groundwater. The maximum nitrate removal efficiency and N₂ selectivity reached to 83.4% and 78.5% after 12 h, respectively. Experimental results demonstrated that the gaseous by-products (NO and N₂O) were negligible and the nitrate reduction process could be well depicted by pseudo-first-order kinetic model. Decreasing the pH value of electrolyte was favorable to electrical energy utilization efficiency and nitrate removal. The chloride ultimately showed inhibitory effects on electrochemical reduction of nitrate. During the electrochemical reaction, the ZVT lost electrons to generate the reducing agents (Ti³⁺ and Ti²⁺), which could afford electrons for nitrate reduction and form the solid by-products TiO_2.4Cl_0.2N_0.1. A 2-stage strategy, indirect electrochemical reduction + hypochlorite treatment (pre-reduction + post-oxidation), was developed to completely remove nitrate and the long-term performance of nitrate reduction was comprehensively evaluated. The effluent nitrate steadily kept at 8.8 mg N/L during 120 h continuous operation when the influent nitrate concentration was 25.9 mg N/L. Simultaneously, nitrite concentration was lower than 0.01 mg N/L, and ammonium and Ti ions were not detected in the effluent.

Biological perchlorate reduction: which electron donor we can choose?

Biological reduction is an effective method for removal of perchlorate (ClO₄^-), where perchlorate is transformed into chloride by perchlorate-reducing bacteria (PRB). An external electron donor is required for autotrophic and heterotrophic reduction of perchlorate. Therefore, plenty of suitable electron donors including organic (e.g., acetate, ethanol, carbohydrate, glycerol, methane) and inorganic (e.g., hydrogen, zero-valent iron, element sulfur, anthrahydroquinone) as well as the cathode have been used in biological reduction of perchlorate. This paper reviews the application of various electron donors in biological perchlorate reduction and their influences on treatment efficiency of perchlorate and biological activity of PRB. We discussed the criteria for selection of appropriate electron donor to provide a flexible strategy of electron donor choice for the bioremediation of perchlorate-contaminated water.

Abstract P6-17-16: Efficacy and safety of shorter duration of adjuvant trastuzumab for patients with HER2 positive early breast cancer: A meta-analysis of randomized controlled trials

Background: Trastuzumab has been shown to be able to improve disease free survival(DFS) and overall survival(OS) in HER2-positive breast cancer patients. Adjuvant trastuzumab is empirically recommended for 1 year as a standard regimen. However, several studies claimed that shorter duration of adjuvant trastuzumab is non-inferior to 12 months treatment with reduced cardiac toxicities and costs.

Methods: PubMed, EMBASE, Cochrane Library, Google scholar Web, ISI Web of Science, BIOSIS and CNKI, and major conference abstracts were searched systematically in June 2018 to identify eligible non-inferiority studies comparing the intervention outcomes of adjuvant trastuzumab in chemotherapy for women with HER-2 positive breast cancer between short-term and 1-year treatments. Hazard-Ratios(HR) and corresponding 95% Confidence Intervals(CI) were calculated to compare OS and DFS of trastuzumab between short-term and long-term treatments. Pooled data of Odds-Ratio was analyzed for cardiac toxicities.

Results: 5 articles were finally eligible in the study. Totally, there were 11,376 women with HER-2 positive early breast cancer, with 5,684 in short-term group and 5,692 in the 1-year group. We found a distinct difference of DFS (HR=1.19, 95% CI=1.08-1.30) and OS (HR=1.22, 95% CI=1.07-1.39) between short-term and 12 months trastuzumab in the total analysis, which demonstrated short-term treatment exhibited a worsening trend on DFS and OS. Subgroup analysis was performed based on estrogen receptor (ER) and lymph node status, and no statistical interaction could be found(p=0.12, 0.52, respectively). The two groups with different duration of trastuzumab treatment displayed statistically significant difference for cardiotoxicities, which favored shorter duration(OR=0.54, 95% CI=0.38-0.77).

Conclusions: 1-year adjuvant trastuzumab remains the standard strategy for HER2 positive early breast cancer, however, a concomitant higher risk of associated cardiac adverse effects should not be ignored.

Citation Format: Li J, Wang G, Wu Q, Chen C, Tu Y, Yao F, Wei W, Sun S, Santa-Maria CA, Geng P. Efficacy and safety of shorter duration of adjuvant trastuzumab for patients with HER2 positive early breast cancer: A meta-analysis of randomized controlled trials [abstract]. In: Proceedings of the 2018 San Antonio Breast Cancer Symposium; 2018 Dec 4-8; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2019;79(4 Suppl):Abstract nr P6-17-16.

[Economic burden of stomach cancer in China during 1996-2015: a systematic review]

Objective: To clarify the research status of economic burden of stomach cancer in China from 1996 to 2015. Methods: Based on three electronic literature databases (China Knowledge Resource Integrated Database, Wanfang Database and PubMed), a total of 2 873, 1 244 and 84 articles published during 1996 to 2015 were found, respectively, using keywords of"cancer","neoplasms","malignant tumor","tumor","economic burden","health expenditure","cost","cost of illness", and"China". According to the inclusion and exclusion criteria, 30 literatures were included in the final analysis. Then the basic information and study subjects, indicators and main results of economic burden were abstracted and analyzed. All the expenditure data were discounted to the values in 2013 by using China's percapita consumer price index. Results: Totally, 30 articles were included, covering 14 provinces and of which 16 were published during 2011-2015. One article was based on population-level and the remaining studies were all based on individual-level. The number of individual-level articles that reported direct medical, non-medical and indirectly economic burden was 29, 1 and 2, respectively. The main indicators of direct medical expenditure were expenditure per patient (22), per clinical visit (9) and per diem (11), respectively. The median expenditure per patient was 7 387-28 743 RMB (CNY), with average annual growth rate (AAGR) of 1.7% (1996-2013). The median expenditure per clinical visit was 18 504-41 871 RMB (2003-2013), with AAGR of 5.5%. The median expenditure per diem was 313-1 445 RMB (1996-2012), with AAGR of 3.7%. Difference was found among provinces. Conclusions: The evidence for economic burden of stomach cancer was still limited over the past two decades and mainly focused on individual and regional levels. An increase and differences in provinces were observed in direct medical expenditure. Evaluation on direct non-medical and indirect medical expenditure needs to be addressed.

Hydrated lanthanum oxide-modified diatomite as highly efficient adsorbent for low-concentration phosphate removal from secondary effluents

The requirement to the phosphorus (P) emission from wastewater treatment plants (WWTPs) is becoming increasingly strict, which makes an advanced treatment for the low-concentration phosphate removal from secondary effluents indispensable. In present work, hydrated lanthanum (La) oxide-modified diatomite composites (La-diatomite) were fabricated by a facile method and employed as the highly efficient adsorbent for the low-concentration phosphate removal from simulating secondary effluents. Comparative experiments indicated that the La-diatomite treated by 0.1 mol/L LaCl₃ exhibited the highest La availability (P/La molar ratio of 2.30) and performed good selectivity to phosphate adsorption even with the coexistence of competing anions and humic acid. The maximum P adsorption capacity reached to 58.7 mg P/g and the 96% P was removed quickly within 30 min at initial phosphate concentration 2 mg P/L. Insignificant La leaching was observed during the process due to the La stabilization by macroporous diatomite. Eight cycles of adsorption-desorption experiments revealed that the excellent repeated use property of La-diatomite. At the column test, La-diatomite showed superior treatment capacities of 3455 kg water/kg La-diatomite for simulated secondary effluents. The La-diatomite maintained high and stable adsorption effectiveness in wide pH range, which should be attributed to the synergistic effect of electrostatic interactions, ligand exchange and Lewis acid-based interaction. This work might provide a candidate for low-concentration phosphate removal from secondary effluent to alleviate the eutrophication.

[Exogenous CRX gene induces Müller cell-derived progenitors to differentiate into photoreceptors]

Objective: To investigate whether exogenous CRX gene would be able to induce Müller cells-derived progenitors to differentiate into photoreceptors. Methods: Experimental study. Müller cells-derived progenitors resulted from primary Müller cells isolated from KunMing mice(5-7 days old) and cultured in free-serum media. Markers of Müller cells(glutamine synthetase, GS and Vimentin) and stem cells (Nestin and Sox2) were analysed by immnocytochemical assays. The secondary passage progenitors were divided into three groups: (1)the control group; (2)the empty vector group was transfected with lentivirus GFP; (3)the treated group was transfected with lentivirus GFP-CRX. After differentiation for 7 days, 7 days after differentiation, the expression of markers of photoreceptors were analyzed by q-PCR and Western blot assay. Results: There were 96.03%±1.21% of Müllerz cells cultured in vitro were immunoreactive to both GS and Vimentin. The dedifferentiation cells expressed Nestin and Sox2. After 7 days of induction, Exogenous CRX induced Müller cell-derived progenitors to differentiate into rod-like cells showed appearance like neuron morphology. q-PCR demonstrated that mRNAs of CRX and Rhodopsin were upregulated greatly. CRX mRNA were 9 times (P<0.05) and Rhodopsin mRNA were 20 times (P<0.05). The difference between the control group and the empty vector group was not statistically significant. Western blot showed that the expression of CRX was upregulated significantly, and was 2.7 times(P<0.05). But expression of Rhodopsin was weak and was nearly not detected in the control group and empty vector group. The expression of S-opsin was not detected. Conclusion: CRX gene could induce the differentiation of Müller cell-derived progenitor into rod photoreceptors, indicating a new avenue to study müller cells as endogenous seed cells for retinal photoreceptor. (Chin J Ophthalmol, 2018, 54: 923-928).

Sulfate radical induced degradation of Methyl Violet azo dye with CuFe layered doubled hydroxide as heterogeneous photoactivator of persulfate

Persulfate (PS)-based advanced oxidation processes have aroused considerable attentions due to their higher efficiency and wider adaptability to the degradation of bio-recalcitrant organic contaminants. In this study, Cu-Fe layered doubled hydroxide (CuFe-LDH) was employed to degrade Methyl Violet (MV) through heterogeneous photo-activation of PS under visible-light irradiation. The reaction kinetics, degradation mechanism, catalyst stability were investigated in detail. Under the conditions of CuFe-LDH (3:1) dosage 0.2 g/L, PS concentration 0.2 g/L and without initial pH adjustment, 20 mg/L MV was almost completely degraded within 18 min. Electron Spin Resonance (ESR) test and radical quenching experiment indicated that sulfate radicals (SO₄^-) were the dominant reactive oxidants for the MV decolorization, while hydroxyl radicals (OH) were also involved. The CuFe-LDH/PS/Vis system was applicable at wide range of pH level (3-9). However, extreme pH level would lead to the reduction or transformation of SO₄^-. The catalyst CuFe-LDH exhibited excellent stability and maintained relatively high catalytic activity to PS even after four recycles. Mechanism study revealed that the redox cycle of Fe³⁺/Fe²⁺ and Cu²⁺/Cu³⁺ assisted by visible-light irradiation accounted for the enhanced generation of radicals in CuFe-LDH/PS/Vis system, resulting in the improved degradation of organic contaminants. Overall, the CuFe-LDH/PS/Vis process could be a promising approach for the removal of refractory organic pollutants in wastewater.

A modified method for plasmid extraction from Lactobacillus plantarum contained lysozyme removal step

Plasmids of Lactobacillus plantarum PC518 cannot be effectively extracted by existing methods. It was studied that the effect of lysozyme treatment and removal on plasmid extraction by 7 protocols. The modified method was compared with a commercial kit using L. plantarum PC518, 410, 9L15, and JS193 and Weissella cibaria M2 as the tested strains. The results suggested that the step of lysozyme removal is the key to improve the efficiency of plasmid extraction. The concentrations of plasmid DNA isolated from the 5 tested strains were increased by 10.6, 9.5, 6, 5.6 and 1.5 times respectively compared with the commercial kit.

Antiviral effect of baicalin phospholipid complex against duck hepatitis A virus type 1

Duck hepatitis A virus type 1 (DHAV-1) is one of the main pathogens of ducklings and causes a high mortality rate. Baicalin (BA) has potent antiviral effect, but the solubility is very poor. In order to increase the absorption, solubility, and pharmacological activity, the phospholipid complex was used to modify BA in present study. Therefore, BA phospholipid complex (BAPC) was prepared. The anti-DHAV-1 abilities of BA and BAPC in vitro was evaluated by cell counting kit-8 and reverse transcription quantitative PCR. The curative effects of BA and BAPC on ducklings which were infected by DHAV-1 in addition to the ALT and AST levels were also detected. The results indicated the anti-DHAV-1 ability of BAPC was stronger than that of BA both in vitro and in vivo. To explore the anti-DHAV-1 mechanism, the influence of BAPC on DHAV-1 adsorption, replication, and release was studied. Furthermore, the anti-oxidative and immuno-enhancing abilities of BAPC in the treatment of infected ducklings were also determined. The results showed BAPC inhibited DHAV-1 adsorption, replication and release. Furthermore, it played anti-oxidative and immno-enhancing roles in the treatment, and the immno-enhancing role was crucial to the treatment.

[The colonoscopic characteristics of colorectal endometriosis: a single-centered retrospective study]

Objective: To reinforce the awareness of colorectal endometriosis (EM) in colonoscopy examination. Methods: Patients diagnosed as colorectal EM at Peking Union Medical College Hospital between February 2002 and February 2017 were enrolled in this study. The clinical characteristics and endoscopic features of EM lesions were summarized and compared between pathologically positive group and negative group. Results: A total of 34 cases were included with average age of (38.3±8.9) years old. All EM lesions located within rectum and sigmoid colon. The endoscopic lesions manifested as protrusion in 21 cases (61.8%) and protrusion-depression in 13 cases (38.2%), local stenosis in 8 cases (23.5%); erosive surface in 33 cases (97.1%) with local spontaneous hemorrhage in 4 cases (11.8%); nodal surface in 23 cases (67.6%), and lymphangiectasis base in 9 cases (26.4%). Endoscopic biopsy specimens were obtained in all cases with average 3 (2, 4) pieces. Positive results were found only in 4 patients (11.8%) with 3 endometriosis and one (endometrial) adenosarcoma. Compared with negative group, spontaneous hemorrhage was more frequent in positive group (2/4 vs. 2/30, P=0.013). Mean biopsy sample number was significantly larger in positive group (5 vs. 3, P=0.004). Conclusions: Colorectal endometriosis is mostly located within rectosigmoid region. Endoscopic features mainly include protrusion or protrusion-depression lesions with erosive and nodular surface, or local stenosis. Spontaneous hemorrhage under colonoscopy yields higher positive rate for biopsy, thus increasing biopsy sample numbers may improve pathology results.

Effectiveness and mechanisms of phosphate adsorption on iron-modified biochars derived from waste activated sludge

Excessive discharge of phosphate (P) into the surface water is the key factor to cause the eutrophication, so its removal has aroused much attention in recent years. In this study, different iron modification (chemical co-precipitation of Fe³⁺/Fe²⁺ or FeCl₃ impregnation) was used to improve the phosphate adsorption capacity of waste activated sludge (WAS)-based biochar. Comparative tests demonstrated that the FeCl₃-impregnated WAS-based biochar exhibited much superior phosphate adsorption capacity (111.0mg/g) in all as-prepared samples and performed well even under the interferences with pH and coexisting ions. X-ray diffraction (XRD) analyzes indicated that the iron in FeCl₃-impregnated WAS-based biochar existed mainly in amorphous phase, as hematite and amorphous hydroxides forms, which was of great benefit to the phosphate adsorption. Besides, ligand exchange plays important role in the adsorption of phosphate. The WAS-based biochar kept over 60% phosphate removal efficiency after five recycles.

Effective adsorption/electrocatalytic degradation of perchlorate using Pd/Pt supported on N-doped activated carbon fiber cathode

In this work, Pd/Pt supported on N-doped activated carbon fiber (Pd/Pt-NACF) was employed as the electrode for electrocatalytic degradation of perchlorate through adsorption/electroreduction process. Perchlorate in solution was firstly adsorbed on Pd/Pt-NACF and then reduced to non-toxic chloride by the catalytic function of Pd/Pt at a constant current (20mA). Compared with Pd/Pt-ACF, the adsorption capacity and electrocatalytic degradation efficiency of Pd/Pt-NACF for perchlorate increased 161% and 28%, respectively. Obviously, positively charged N-functional groups on NACF surface enhanced the adsorption capacity of Pd/Pt-NACF, and the dissociation of hydrogen to atomic H* by the Pd/Pt nanostructures on the cathode might drastically promote the electrocatalytic reduction of perchlorate. The role of atomic H* in the electroreduction process was identified by tertiary butanol inhibition test. Meanwhile, the perchlorate degradation performance was not substantially lower after three successive adsorption/electrocatalytic degradation experiments, demonstrating the electrochemical reusability and stability of the as-prepared electrode. These results showed that Pd/Pt-NACF was effective for electrocatalytic degradation of perchlorate and had great potential in perchlorate removal from water.

[Development of CalliSpheres® embolic microspheres]

CalliSpheres® embolic microspheres for embolization of the vasculature of liver cancer are designed, manufactured, and verified, in order to improve the effect of transcatheter arterial chemoembolization in the treatment of primary liver cancer.

Effect of nickel on the flocculability, settleability, and dewaterability of activated sludge

Short-term and long-term effects of nickel (Ni) (0.1-10mg/L) on the physicochemical properties of activated sludge, including the flocculability, settleability, and dewaterability, were investigated. It was found that these properties were unaffected after short-term exposure (1day) to Ni(II) even at the level of 10mg/L. After long-term exposure (60days) to 1 and 10mg/L of Ni(II), however, the sludge flocculability has seriously deteriorated, while the settleability, and dewaterability became gradually better than the control. The mechanism studies revealed that long-term exposure to Ni(II) resulted in the decrease of protein content in extracellular polymeric substances (EPS) and the damage to EPS structures. Although Ni(II) did not bring any adverse effect on the cell membrane, the relative hydrophobicity of activated sludge was significantly decreased. The negative effects on the flocculability and phosphorus removal performance of activated sludge could be completely eliminated by adding the chelator such as EDTA and citrate.

Enhanced Photocatalytic Degradation of Tetracycline by AgI/BiVO4 Heterojunction under Visible-Light Irradiation: Mineralization Efficiency and Mechanism

Recently, visible-light-driven photocatalysis is of great interest in the environmental pollutant remediation. In the present study, a novel heterostructured photocatalyst AgI/BiVO₄ was synthesized by an in situ precipitation procedure. The AgI/BiVO₄ heterojunctions exhibited excellent photoactivity for the refractory pollutant (tetracycline (TC), a typical antibiotic) decomposition under visible light illumination. The synthetic sample with 1:4 mass ratio of AgI:BiVO₄ possessed the highest photocatalytic performance in all of the as-prepared catalysts. The TC molecules were substantially eliminated (94.91%) within 60 min, and degradation efficiency was considerably better than those of bare BiVO₄ (62.68%) and AgI (75.43%) under identical conditions. Simultaneously, 90.46% of TOC removal was also achieved within 120 min, suggesting that the mineralization was superior and further confirmed by three-dimensional excitation-emission matrix fluorescence spectroscopy (3D EEMs). The XRD, XPS, DRS, and PL measurements revealed that a small amount of Ag nanoparticles was produced at the early photodegradation process. The structure transformation from AgI/BiVO₄ (double-type) to AgI/Ag/BiVO₄ (sandwich-like) improved the corresponding visible-light absorption performance. The self-assembly Z-scheme heterojunction that consisted of AgI, Ag, and BiVO₄ also efficiently accelerated photoinduced electron-hole pairs' separation and ultimately improved the efficiency of TC degradation. The responsible photocatalytic mechanism was discussed in detail on the basis of the reactive species capturing tests and ESR analysis, and the experimental results had been validated that superoxide radicals and holes played a vital role during the photocatalytic process. Furthermore, TC degradation efficiency was not of significant loss after four consecutive cycles, suggesting the excellent photostability of AgI/BiVO₄ nanocomposite. These features demonstrate that the AgI/BiVO₄ heterojunction has great application potential for refractory pollutants' removal from wastewater.

Diversity of killer cell immunoglobulin-like receptor genes in Drung Chinese

Killer cell immunoglobulin-like receptor (KIR) genes are variably distributed among populations from distinct geographic areas and ethnic origins. We describe, for the first time, KIR gene diversity in 152 unrelated and healthy Drung individuals, as measured by sequence-specific polymerase chain reaction. All 16 known KIR genes were detected. Of these, the framework genes KIR2DL4, 3DL2, 3DL3, and 3DP1 were present in all individuals as expected, along with the non-framework genes KIR2DL1, 2DL3, and 2DP1. In contrast, KIR2DL2, 2DS2, and 2DS5 were unusually rare, suggesting that KIR gene distribution was relatively concentrated. Ten different KIR genotypes were found, of which the most common consisted of nine genes (KIR2DL1, 2DL3, 2DL4, 2DS4, 3DL1, 3DL2, 3DL3, 2DP1, and 3DP1) and accounted for 66.4% of participants. There were eight different haplotypes present, of which the A haplotype was the most common (81.9%). Principal components and dendrogram analysis confirmed that the Drung Chinese are most closely related to the Japanese, the Zhejiang Han, and the Yunnan Han. In conclusion, distinctive frequencies of KIR genes, haplotypes, and genotypes are observed in Chinese Drung.

Recognition of Y Fragment Deletion by Genotyping Graphs after Amplified by PowerPlex® 21 Detection Kit

OBJECTIVES

To recognize the possibility of Y fragment deletion of Amelogenin gene intuitively and simply according to the genotyping graphs.

METHODS

By calculating the ratio of total peak height of genotyping graphs, the statistics of equilibrium distribution between Amelogenin and D3S1358 loci, Amelogenin X-gene and Amelogenin Y-gene, and different alleles of D3S1358 loci from 1 968 individuals was analyzed after amplified by PowerPlex^® 21 detection kit.

RESULTS

Sum of peak height of Amelogenin X allele was not less than 60% that of D3S1358 loci alleles in 90.8% female samples, and sum of peak height of Amelogenin X allele was not higher than 70% that of D3S1358 loci alleles in 94.9% male samples.

CONCLUSIONS

The result of genotyping after amplified by PowerPlex^® 21 detection kit shows that the possibility of Y fragment deletion should be considered when only Amelogenin X-gene of Amelogenin is detected and the peak height of Amelogenin X-gene is not higher than 70% of the total peak height of D3S1358 loci.