Risk associated with microplastics in urban aquatic environments: A critical review

When antibiotics encounter microplastics in aquatic environments: Interaction, combined toxicity, and risk assessments

Antibiotics and microplastics (MPs), known as emerging pollutants, are bound to coexist in aquatic environments due to their widespread distribution and prolonged persistence. To date, few systematic summaries are available for the interaction between MPs and antibiotics in aquatic ecosystems, and a comprehensive reanalysis of their combined toxicity is also needed. Based on the collected published data, we have analyzed the source and distribution of MPs and antibiotics in global aquatic environments, finding their coexistence occurs in a lot of study sites. Accordingly, the presence of MPs can directly alter the environmental behavior of antibiotics. The main influencing factors of interaction between antibiotics and MPs have been summarized in terms of the characteristics of MPs and antibiotics, as well as the environmental factors. Then, we have conducted a meta-analysis to evaluate the combined toxicity of antibiotics and MPs on aquatic organisms and the related toxicity indicators, suggesting a significant adverse effect on algae, and inapparent on fish and daphnia. Finally, the environmental risk assessments for antibiotics and MPs were discussed, but unfortunately the standardized methodology for the risk assessment of MPs is still challenging, let alone assessment for their combined toxicity. This review provides insights into the interactions and environment risks of antibiotics and MPs in the aquatic environment, and suggests perspectives for future research.

Are we underestimating stormwater? Stormwater as a significant source of microplastics in surface waters

Stormwater represent a critical pathway for transporting microplastics (MPs) to surface waters. Due to complex dynamics of MPs in stormwater, its dispersion, weathering, risk, and transport are poorly understood. This review bridges those gaps by summarizing the latest findings on sources, abundance, characteristics, and dynamics involved in stormwater MP pollution. Weathering starts before or after MPs enter stormwater and is more pronounced on land due to continuous heat and mechanical stress. Land use patterns, rainfall intensity, MPs size and density, and drainage characteristics influence the transport of MPs in stormwater. Tire and road wear particles (TRWPs), littering, and road dust are major sources of MPs in stormwater. The concentrations of MPs varies from 0.38-197,000 particles/L globally. Further MP concentrations showed regional variations, highlighting the importance of local monitoring efforts needed to understand local pollution sources. We observed unique signatures associated with the shape and color of MPs. Fibers and fragments were widely reported, with transparent and black being the predominant colors. We conclude that the contribution of stormwater to MP pollution in surface waters is significantly greater than wastewater treatment plant effluents and demands immediate attention. Field and lab scale studies are needed to understand its behavior in stormwater and the risk posed to the downstream water bodies.

A systematic review on the current situation of emerging pollutants in Mexico: A perspective on policies, regulation, detection, and elimination in water and wastewater

Emerging pollutants (EPs) emerged as a group of new compounds whose presence in the environment has been widely detected in Mexico. In this country, different concentrations of pharmaceutical compounds, pesticides, dyes, and microplastics have been reported, which vary depending on the region and the analyzed matrix (i.e., wastewater, surface water, groundwater). The evidence of the EPs' presence focuses on the detection of them, but there is a gap in information regarding is biomonitoring and their effects in health in Mexico. The presence of these pollutants in the country associated with lack of proper regulations in the discharge and disposal of EPs. Therefore, this review aims to provide a comprehensive view of the current environmental status, policies, and frameworks regarding Mexico's situation. The review also highlights the lack of information about biomonitoring since EPs are present in water even after their treatment, leading to a critical situation, which is high exposure to humans and animals. Although, technologies to efficiently eliminate EPs are available, their application has been reported only at a laboratory scale thus far. Here, an overview of health and environmental impacts and a summary of the research works reported in Mexico from 2014 to 2023 were presented. This review concludes with a concrete point of view and perspective on the status of the EPs' research in Mexico as an alert for government entities about the necessity of measures to control the EPs disposal and treatment.

Zooplankton as a suitable tool for microplastic research

In recent years, significant efforts have been dedicated to measuring and comprehending the impact of microplastics (MPs) in the ocean. Despite harmonization guidelines for MPs research, discrepancies persist in the applied methodologies and future challenges, mostly for the smaller fractions (< 100 μm). Whether intentional or accidental, ingesting plastic particles by zooplankton can lead to incorporating this pollutant into aquatic food chains. Therefore, zooplankton can serve as a suitable proxy tool for assessing the presence of plastic particles in ocean waters. However, reliable information is essential for conducting experimental laboratory studies on the impact of MPs ingestion by zooplankton organisms. Using zooplankton as a research tool for MPs offers numerous advantages, including similar sampling methodologies and study techniques as MPs and particle data integration over space and time. The scientific community can gain novel perspectives by merging zooplankton studies with MPs research. This review explores key aspects of using zooplankton as a tool for MPs research in water samples, encompassing various views such as particles ingestion in natural environments, particle quantification in zooplankton samples (past and future), ecotoxicological and toxicology model studies. By leveraging the potential of zooplankton research, advancements can be made in developing innovative techniques for MPs analysis.

Releases of microplastics and chemicals from nonwoven polyester fabric-based polyurethane synthetic leather by photoaging

The nonwoven PET fabrics are chemically, mechanically and thermally treated fiber aggregate without weaving, knitting or braiding, which could be used as a base to make polyurethane (PU) synthetic leather through a series of processing. Our research systematically compared the photoaging behaviors of pure non-woven PET base fabric (NPET-P) and PU synthetic leather (nonwoven PET-base fabrics with PU coating, NPET-U), and their possibilities for microplastic fibers (MPFs) generation and chemical transformation in water. NPET-U was photoaged to a higher oxidation degree with higher O/C ratios and more distinct changes in chemical structures. The amount of MPFs released from NPET-U (1.98 × 107 g/fibers) was significantly lower than that from NPET-P (4.76 × 107 g/fibers) after 360 h light irradiation (p value <0.05) with a slower degradation rate and delayed MPFs release. The lengths and diameters of released MPFs from NPET-U varied within a smaller range than that from NPET-P exposed to UV light irradiation. Natural sunlight aging of fabrics for 365 days was found to be equivalent to approximately 85.3-127.2 h UV aging in the laboratory, which indicated the lab accelerated experiments was extraordinarily intense to simulate natural sunlight aging. Furthermore, abundant calcium and sulfur-contained chemicals were detected in original fabrics and the leachate of 360 h light-aged fabrics using the inductively coupled plasma optical emission spectrometer (ICP-OES). The organic components of the leachate were separated according to their molecular weight with the changes of dissolved organic carbon (DOC), dissolved organic nitrogen (DON), and the UV response over aging time. UV stimulation aggravated the role of plastic polymers as disinfection by-product (DBP) precursors. Nevertheless, although NPET-U could produce more nitrogen-contained chemicals, it had similar formation potentials of nitrogen-containing DBPs as NPET-P. The discussion lucubrated the potential risks of the production of MPFs and chemical release in the leachate with regard to combined plastic pollution.

Toxicity of polyvinyl chloride microplastics on Brassica rapa

Microplastics (MPs) can pose high risk to living organisms due to their very small sizes. This study selected polyvinyl chloride MPs (PVC-MPs) which experienced up to 1000 h UV light radiation to investigate the influence of PVC-MPs on Brassica rapa growth. The outcomes showed the presence of PVC-MPs inhibited the plants' growth. The stem length, root length, fresh weight and dry weight of plants exposed to PVC-MPs after 30 days reduced by 45.9%, 35.2%, 26.1% and 5.2%, respectively. The chlorophyll, soluble sugar, malondialdehyde (MDA) and catalase (CAT) concentrations for plants exposed to PVC-MPs after 30 days increased by 25.9%, 135.7%, 88.7% and 47.1% respectively. It was also observed that PVC-MPs blocked the plants' leaf stomata and even entered plants' bodies. This might lead to PVC-MPs movement within the plants and influence plants' growth. The transcriptomic analysis results indicated that exposure to PVC-MPs up-regulated metabolic pathway of plant hormone signal transduction of the plants and down-regulated pathway network of ribosome. However, the research outcomes also showed that the PVC-MPs' locations in soil (located at the upper layers or at lower layers) and the UV light radiation time did not exert significantly different influences on inhibiting plants' growth. This can be attributed to PVC-MPs' small sizes and not much decomposition under light radiation. These imply that longer light radiation time and different particle sizes should be included into future research in order to further explore photodegraded MPs' toxicity effects on plants.

Occurrence and risk associated with urban road-deposited microplastics

An in-depth understanding of urban road-deposited MPs is important for the accurate prediction of the risk posed by MPs in different exposure scenarios. This study provides new insights into the intrinsic/extrinsic factors in terms of the variability of concentration and species in urban road-deposited MPs. The study results confirmed that a considerable abundance of road-deposited MPs can be identified with the average concentration ranging from 0.33 to 3.64 g m-2. Land use types and sediment particle size are the important factors that contribute to MPs abundance. The majority of detected MPs including polyethylene (PE), polypropylene (PP), polystyrene (PS) and polyethylene terephthalate (PET) are mainly derived from anthropogenic activities in commercial and residential land uses while rubber MP particles in urban road surfaces are mainly derived from tyre wear. The significant correlation (p < 0.05) between MPs and fine dust particles (< 150 µm) indicated the high affinity of small dust particles for MPs. The risk scores from MPs varied greatly from 10 to 11,000 among the study sites, which indicated the significant spatial variation of potential environmental risks posed by road-deposited MPs. The hotspots of risks posed by MPs were in areas with a high fraction of industrial, commercial and residential land uses. Specifically, the highest risk from MPs was found in mixed industrial and residential areas.

Microplastics pollution in freshwater sediments: The pollution status assessment and sustainable management measures

Microplastics (MPs) pollution in freshwater sediments has brought hidden dangers to food and drinking water supply. Implementing sustainable management measures for MPs pollution in freshwater sediments has become an inevitable trend for sustainable development of society. Existing studies still lacked sufficient discussion in sustainable management of MPs pollution in freshwater sediments. This makes it difficult to formulate sustainable management measures for MPs pollution in freshwater sediments. This study analyzed the pollution status of MPs in freshwater sediments from 84 study areas. The results showed that current studies on MPs pollution in freshwater sediments were mainly concentrated in densely populated and economically developed areas. The average abundance of MPs in freshwater sediments from collected study areas was 1290.88 items/kg, this brought a potential threat to sustainable development in surrounding areas. The pollution load level and potential ecological risk level of MPs in freshwater sediments from these study areas were low. Reducing MPs discharge and restricting the use of high-risk polymers are effective ways to prevent the deterioration of MPs pollution status in freshwater sediments. The abundance and types of MPs in freshwater sediments from these study areas were affected by human activities. Sustainable management of MPs pollution in freshwater sediments from collected study areas requires establishing a lifecycle management system for plastic products, and the industrial structures should be optimized. In addition, legislation and market regulation are effective ways to restrict the discharge of plastic wastes. Sustainable management of MPs in freshwater sediments requires the synergy of legislation and market regulation.