Highly efficient full solar spectrum (UV-vis-NIR) photocatalytic performance of Ag2S quantum dot/TiO2 nanobelt heterostructures

0D/2D heterojunction constructed by Ag2S quantum dots anchored on graphdiyne (g-CnH2n-2) nanosheets for wide spectrum photocatalytic H2 evolution

Precisely crafting heterojunctions for efficient charge separation is a major obstacle in the realm of photocatalytic hydrogen evolution. A 0D/2D heterojunction was successfully fabricated by anchoring Ag2S quantum dots (Ag2S QDs) onto graphdiyne (GDY) nanosheets (Ag2S QDs/GDY) using a straightforward physical mixing technique. This unique structure allows for excellent contact between GDY and Ag2S QDs, thereby enhancing the rate of charge transfer. The light absorption capabilities of Ag2S QDs/GDY extend up to 1200 nm, enabling strong absorption of light, including infrared. Through DFT calculations and in-situ XPS analysis, it was demonstrated that incorporating Ag2S QDs onto GDY effectively modulates the electronic structure, promotes an internal electric field, and facilitates directional electron transfer. This directed electron transfer enhances the utilization of electrons by GDY and Ag2S QDs, with the added benefit of Ag2S QDs serving as electron reservoirs for efficient photocatalytic hydrogen evolution. A 7 %Ag2S QDs/GDY composite exhibited impressive efficiency and stable performance in photocatalytic hydrogen evolution (2418 μmol g-1 h-1), which is much higher than that of GDY and Ag2S QDs. This study conclusively demonstrates that the 0D/2D heterojunction formed by GDY and Ag2S QDs can establish high-quality contact and efficient charge transfer, ultimately enhancing photocatalytic performance.

Nanocomposite Marvels: Unveiling Breakthroughs in Photocatalytic Water Splitting for Enhanced Hydrogen Evolution

An overview of the significant innovations in photocatalysts for H2 development, photocatalyst selection criteria, and photocatalytic modifications to improve the photocatalytic activity was examined in this Review, as well as mechanisms and thermodynamics. A variety of semiconductors have been examined in a structured fashion, such as TiO2-, g-C3N4-, graphene-, sulfide-, oxide-, nitride-, oxysulfide-, oxynitrides, and cocatalyst-based photocatalysts. The techniques for enhancing the compatibility of metals and nonmetals is discussed in order to boost photoactivity within visible light irradiation. In particular, further deliberation has been carried out on the development of heterojunctions, such as type I, type II, and type III, along with Z-systems, and S-scheme systems. It is important to thoroughly investigate these issues in the sense of visible light irradiations to enhance the efficacy of photocatalytic action. In fact, another advancement in this area may include hiring mediators including grapheme oxide and metals to establish indirect Z-scheme montages with a correct band adjustment. The potential consideration of reaction chemology, mass transfer, kinetics of reactions, restriction of light diffusion, and the process and selection of suitable light and photoreactor also will optimize sustainable hydrogen output efficiency and selectivity.

One-pot hydrothermal synthesis of noble-metal-free NiS on Zn0.5Cd0.5S nanosheet photocatalysts for high H2 evolution from water under visible light

At present, the rational design and facile synthesis of highly active and low-cost photocatalysts are still facing great challenges. Herein, a series of Zn0.5Cd0.5S/NiS (x mol%) composite photocatalysts have been synthesized via a simple and mild one-pot hydrothermal method. Compared with pure Zn0.5Cd0.5S, the NiS-loaded samples exhibit enhanced photocatalytic hydrogen generation performance, in which the Zn0.5Cd0.5S/NiS-5% sample has the highest H2 production rate of 10 855 ± 461 μmol h-1 g-1 with a quantum yield of 11.82% at 365 nm, which is almost 6.3 times higher than that of pristine Zn0.5Cd0.5S. The high activity of the Zn0.5Cd0.5S/NiS nanosheets may be attributed to their distinct nanostructure, including a short transfer distance of photoinduced charge carriers, a large number of unsaturated surface atoms, and a large surface area. Moreover, the added NiS nanoparticles served as an effective cocatalyst to promote photoinduced electron transfer and enhance the surface kinetics of H2 evolution. Our work provides a simple and effective route for the preparation of sulphur-based photocatalysts, which can significantly improve the efficiency of hydrogen production from water.

Development of TiO2-CaCO3 Based Composites as an Affordable Building Material for the Photocatalytic Abatement of Hazardous NOx from the Environment

This study explores the depollution activity of a photocatalytic cementitious composite comprising various compositions of n-TiO2 and CaCO3. The photocatalytic activity of the CaCO3-TiO2 composite material is assessed for the aqueous photodegradation efficiency of MB dye solution and NOx under UV light exposure. The catalyst CaCO3-TiO2 exhibits the importance of an optimal balance between CaCO3 and n-TiO2 for the highest NOx removal of 60% and MB dye removal of 74.6%. The observed trends in the photodegradation of NOx removal efficiencies suggest a complex interplay between CaCO3 and TiO2 content in the CaCO3-n-TiO2 composite catalysts. This pollutant removal efficiency is attributed to the synergistic effect between CaCO3 and n-TiO2, where a higher percentage of n-TiO2 appeared to enhance the photocatalytic activity. It is recommended that CaCO3-TiO2 photocatalysts are effectiveness in water and air purification, as well as for being cost-effective construction materials.

Plasmonic coupling-boosted photothermal nanoreactor for efficient solar light-driven photocatalytic water splitting

Photothermal nanoreactor with rapid charge transfer and improved spectral utilization is a key point in photocatalysis research. Herein, silver sulfide quantum dots (Ag2S QDs) were coating on the surface of porous graphitic carbon nitride nano vesicles (PCNNVs) to form Ag2S/PCNNVs nanoreactors by a simple calcination method for obtaining efficient photothermal-assisted photocatalytic hydrogen (H2) evolution under simulated/real sunlight irradiation. In particularly, the as-prepared optimal 3% Ag2S/PCNNVs sample exhibited the H2 production rate of 34.8 mmol h-1 g-1, which was 3.5 times higher than that of bare PCNNVs. The enhancement of photothermal-assisted activity over the Ag2S/PCNNVs composite system is mainly attributed to the coupling of the photothermal conversion performance of Ag2S QDs and the thermal insulation performance of PCNNVs based on the plasmonic coupling-boosted photothermal nanoreactor. This study presents a promising strategy for the development of high-efficient photothermal-assisted photocatalysts.

Metal sulphides and their heterojunctions for photocatalytic degradation of organic dyes-A comprehensive review

Water pollution caused by organic dyes is one of the greatest threats to the ecosystem. The removal of dyes from water has remained a challenge for scientists. Recently, metal sulphides have emerged as a potential candidate for water remediation applications. The efficient charge transportation, greater surface-active sites, and low bandgap of metal sulphides make them an excellent choice of semiconductor photocatalysts for degradation of dyes. This review summarises the potential application of metal sulphides and their heterojunctions for the photocatalytic degradation of organic dyes from wastewater. A detailed study has been presented on the synthesis, basics of photodegradation and heterojunctions and photocatalytic activity. The effect of the use of templates, doping agents, synthesis route, and various other factors affecting the photocatalytic activity of metal sulphides have been summarised in this review. The synthesis techniques, characterisation techniques, mechanism of degradation of organic dyes by Z-scheme heterojunction photocatalyst, reusability and stability of metal sulphides, and the scope of future research are also discussed. This study indicates that Scopus-based core gathered data could be used to give an objective overview of the global dye degradation research from 2008 to 2023 (15 years). All data (articles, authors, keywords, and publications) is compiled in the Scopus database. For the bibliometric study, 1962 papers relevant to dye photodegradation by sulfide-based photocatalysts were found, and this number rises yearly. A bibliometric analysis provides a 15-year evaluation of the state-of-the-art research on the impact of metal sulfide-based photocatalysts on the photodegradation of dyes.

Near-Infrared (NIR) Silver Sulfide (Ag2S) Semiconductor Photocatalyst Film for Degradation of Methylene Blue Solution

A silver sulfide (Ag₂S) semiconductor photocatalyst film has been successfully synthesized using a solution casting method. To produce the photocatalyst films, two types of Ag₂S powder were used: a commercialized and synthesized powder. For the commercialized powder (CF/comAg₂S), the Ag₂S underwent a rarefaction process to reduce its crystallite size from 52 nm to 10 nm, followed by incorporation into microcrystalline cellulose using a solution casting method under the presence of an alkaline/urea solution. A similar process was applied to the synthesized Ag₂S powder (CF/syntAg₂S), resulting from the co-precipitation process of silver nitrate (AgNO₃) and thiourea. The prepared photocatalyst films and their photocatalytic efficiency were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and UV-visible spectroscopy (UV-Vis). The results showed that the incorporation of the Ag₂S powder into the cellulose films could reduce the peak intensity of the oxygen-containing functional group, which indicated the formation of a composite film. The study of the crystal structure confirmed that all of the as-prepared samples featured a monoclinic acanthite Ag₂S structure with space group P₂₁/C. It was found that the degradation rate of the methylene blue dye reached 100% within 2 h under sunlight exposure when using CF/comAg₂S and 98.6% for the CF/syntAg₂S photocatalyst film, and only 48.1% for the bare Ag₂S powder. For the non-exposure sunlight samples, the degradation rate of only 33-35% indicated the importance of the semiconductor near-infrared (NIR) Ag₂S photocatalyst used.

Bismuth Tungstate-Silver Sulfide Z-Scheme Heterostructure Nanoglue Promotes Wound Healing through Wound Sealing and Bacterial Inactivation

Rapid wound closure and bacterial inactivation are effective strategies to promote wound healing. Herein, a versatile nanoglue, bismuth tungstate (Bi₂WO₆)-silver sulfide (Ag₂S) direct Z-scheme heterostructure nanoparticles (BWOA NPs), was designed to accelerate wound healing. BWOA NPs' hollow structure and rough surface could effectively close wound tissues acting as a barrier between external bacteria and the wound. More importantly, the unique Z-scheme heterostructure endows BWOA NPs with an effective electron and hole separating ability with potent redox potential, where electrons and holes could effectively react with water and oxygen to produce reactive oxygen species, leading to a higher antibacterial activity against both endogenous and external bacteria at the wound site. A series of in vitro and in vivo biological assessments demonstrated that BWOA NPs could rapidly close wounds and promote wound healing. With sunlight irradiation, the inhibiting rates of BWOA NPs against Escherichia coli and Staphylococcus aureus are 61.62 ± 2.85 and 73.40 ± 3.28%, respectively. Also, the wound healing rate in BWOA NP-treated mice is 25.90 ± 5.85% higher than PBS. This design provides a new effective strategy to promote bacterial inactivation and accelerate wound healing.

A highly efficient In2S3/Ag2S/TiO2NTAs photoelectrodes for photocathodic protection of Q235 carbon steel under visible light

A novel In₂S₃/Ag₂S/TiO₂nanotube arrays (NTAs) was successfully fabricated by successive ionic layer adsorption and reaction method and electrochemical anodic oxidation method, and served as photoanode for photocathodic protection application. The micromorphologies, optical absorption properties, crystalline structure and elemental valence states of the composites were performed by field emission scanning electron microscopy, high resolution transmission electron microscope, UV-vis diffuse reflectance absorption spectra, x-ray diffractometer and x-ray photoelectron spectroscopy, respectively. The photocathodic protection performances of In₂S₃/Ag₂S/TiO₂NTAs on the Q235 carbon steel (CS) were also studied. The In₂S₃/Ag₂S/TiO₂nanocomposites show better photoelectrocatalytic and photocathodic protection performance than pure TiO₂NTAs. The photocurrent density of In₂S₃(9)/Ag₂S(8)/TiO₂photoelectrode coupled with Q235 CS reach 211μA cm^-2, which is about 4.5 times higher than that of TiO₂NTAs. The photogenerated potential of Q235 CS coupled to In₂S₃(9)/Ag₂S(8)/TiO₂under illumination shows a negative shift to -0.92 V versus SCE. Results indicate that the co-sensitization of In₂S₃and Ag₂S could extend the light absorption of TiO₂to the visible light range and enhance its photoelectric conversion efficiency.

A novel photoelectrochemical immunosensor based on TiO2@Bi2WO6 hollow microspheres and Ag2S for sensitive detection of SARS-COV-2 nucleocapsid protein

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-COV-2) is a cluster of β coronaviruses. The 2019 coronavirus disease (COVID-19) caused by SARS-COV-2 is emerging as a global pandemic. Thus, early diagnosis of SARS-COV-2 is essential to prevent severe outbreaks of the disease. In this experiment, a novel label-free photoelectrochemical (PEC) immunosensor was obtained based on silver sulfide (Ag₂S) sensitized titanium dioxide@bismuth tungstate (TiO₂@Bi₂WO₆) nanocomposite for quantitative detection of SARS-COV-2 nucleocapsid protein. The constructed TiO₂@Bi₂WO₆ hollow microspheres had large specific surface area and could produce high photocurrent intensity under visible light illumination. Ag₂S was in-situ grown on the surface of thioglycolic acid (TGA) modified TiO₂@Bi₂WO₆. In particular, TiO₂@Bi₂WO₆ and Ag₂S formed a good energy level match, which could effectively enhance the photocurrent conversion efficiency and strength the photocurrent response. Ascorbic acid (AA) acted as an effective electron donor to effectively eliminate photogenerated holes. Under optimal experimental conditions, the constructed immunosensor presented a supersensitive response to SARS-COV-2 nucleocapsid protein, with a desirable linear relationship ranged from 0.001 to 50 ng/mL for nucleocapsid protein and a lower detection limit of 0.38 pg/mL. The fabricated sensor exhibited a wide linear range, excellent selectivity, specificity and stability, which provided a valuable referential idea for the detection of SARS-COV-2.

Nano-architectural design of TiO2 for high performance photocatalytic degradation of organic pollutant: A review

In the past several decades, significant efforts have been paid toward photocatalytic degradation of organic pollutants in environmental research. During the past years, titanium dioxide nano-architectures (TiO₂ NAs) have been widely used in water purification applications with photocatalytic degradation processes under Uv/Vis light illumination. Photocatalysis process with nano-architectural design of TiO₂ is viewed as an efficient procedure for directly channeling solar energy into water treatment reactions. The considerable band-gap values and the subsequent short life time of photo-generated charge carriers are showed among the limitations of this approach. One of these effective efforts is the using of oxidation processes with advance semiconductor photocatalyst NAs for degradation the organic pollutants under UV/Vis irradiation. Among them, nano-architectural design of TiO₂ photocatalyst (such as Janus, yolk-shell (Y@S), hollow microspheres (HMSs) and nano-belt) is an effective way to improve oxidation processes for increasing photocatalytic activity in water treatment applications. In the light of the above issues, this study tends to provide a critical overview of the used strategies for preparing TiO₂ photocatalysts with desirable physicochemical properties like enhanced absorption of light, low density, high surface area, photo-stability, and charge-carrier behavior. Among the various nanoarchitectural design of TiO₂, the Y@S and HMSs have created a great appeal given their considerable large surface area, low density, homogeneous catalytic environment, favorable light harvesting properties, and enhanced molecular diffusion kinetics of the particles. In this review was summarized the developments that have been made for nano-architectural design of TiO2 photocatalyst. Additional focus is placed on the realization of interfacial charge and the possibility of achieving charge carriers separation for these NAs as electron migration is the extremely important factor for increasing the photocatalytic activity.

Photocatalysis for arsenic removal from water: considerations for solar photocatalytic reactors

The following work provides a perspective on the potential application of solar heterogeneous photocatalysis, which is a nonselective advanced oxidation process considered as a sustainable technology, to assist in arsenic removal from water, which is a global threat to human health. Heterogeneous photocatalysis can oxidize trivalent arsenic to pentavalent arsenic, decreasing its toxicity and easing its removal with other technologies, such as chemical precipitation and adsorption. Several lab-scale arsenic photocatalytic oxidation and diverse solar heterogeneous photocatalytic operations carried out in different reactor designs are analyzed. It was found out that this technology has not been translated to operational pilot plant scale prototypes. General research on reactors is scarce, comprising a small percentage of the photocatalysis related scientific literature. It was possible to elucidate some operational parameters that a reactor must comply to operate efficiently. Reports on small-scale application shed light that in areas where other water purification technologies are economically and/or technically not suitable, and the solar energy is available, shed light on the fact that solar heterogeneous photocatalysis is highly promissory within a water purification process for removal of arsenic from water.

Boosting Visible-Light-Driven Photocatalytic Hydrogen Production through Sensitizing TiO2 via Novel Nanoclusters

Improving the light utilization and electron-hole separation efficiency plays a central role in photocatalysis for converting light energy to hydrogen energy. Herein, for the first time, a stable, highly dispersible discrete T4 [Cd₃In₁₇Se₃₁]^5- cluster is developed as a novel photosensitizer to sensitize TiO₂ for photocatalytic hydrogen production. Compared with pristine TiO₂ (near zero) and the T4 clusters (19.5 μmol g^-1 h^-1) that exhibit low hydrogen evolution activities, the T4/TiO₂ composite, constructed from traces of 0.127 mol % T4 cluster-sensitized TiO₂, exhibits a dramatically improved photocatalytic activity of 328.2 μmol g^-1 h^-1, highlighting that the photocatalytic efficiency strongly correlates with that of the T4 cluster. In the meantime, the T4/TiO₂ composites are highly stable, remaining robust in a long-time test of 50 h for photocatalytic hydrogen production. Ultrafast transient absorption spectroscopy, in combination with electrochemical analyses, steady-state and time-resolved photoluminescence, and density functional theory calculations, indicates that the T4 cluster not only serve as a photosensitizer to absorb visible light but also form a heterojunction between the interface of the T4 cluster and TiO₂ to accelerate electron injection. This work highlights the great potential of the stable and highly dispersed discrete metal chalcogenide clusters as high-efficiency photosensitizers for converting solar energy to chemical energy.

Enhanced photocatalytic performance of PdO-loaded heterostructured nanobelts to degrade phenol

Heterostructured catalysts play a significant role in the photodegradation of pollutants in wastewater. Combining the large surface of nanobelts with the high photocatalytic property of titanium dioxide (TiO₂) nanoparticles is a promising method for preparing photocatalysts, which have an advanced photocatalytic activity and are easy to precipitate. In this work, titanium dioxide nanobelts (NB) and acid corroded titanium dioxide nanobelts (C-NB) were synthesized via a hydrothermal process under alkaline conditions. Their surfaces were then loaded with palladium oxide (PdO) nanoparticles to prepare heterostructured photocatalysts (PdO-NB and PdO-C-NB) by a well-designed chemical precipitation method. The photodegradation efficiencies of the four catalysts for phenol, as well as for methyl orange, were tested and the order of degradation efficiency was found to be PdO-C-NB > PdO-NB > C-NB > NB. A degradation efficiency of 61% for phenol was achieved within 90 min using PdO-C-NB, which was nearly twice as much as using NB. The enhanced photocatalytic property of PdO-C-NB was due to the large specific surface area, abundant photocatalytic active sites and the low recombination rate of electron-hole pairs. Therefore, the degradation of phenol and methyl orange was speeded up considerably. Considering the high catalytic activity of PdO-C-NB, the heterostructure catalyst is of great significance to the degradation of organic wastewater, and has an important impact on our ecological environment and human health.

Near-Infrared-Responsive Photocatalysts

Broadening the absorption of light to the near-infrared (NIR) region is important in photocatalysis to achieve efficient solar-to-fuel conversion. NIR-responsive photocatalysts that can utilize diffusive solar energy are attractive for alleviating the energy crisis and environmental pollution. Over the past few years, considerable progress on the component and structural design of NIR-responsive photocatalysts have been reported. This study aims to systematically summarize recent progress toward the material design and mechanism optimization of NIR-responsive photocatalysts in this area. Depending on the main strategies for harvesting NIR photons, NIR-responsive photocatalysts can be categorized as direct NIR-light photocatalysts, indirect NIR-light photocatalysts, and photothermal photocatalysts. Furthermore, the construction and application of different NIR-responsive photocatalytic systems are summarized. Conclusions and perspectives are presented to further explore the potential of NIR-responsive photocatalysts in this field.

One-step synthesis of Ag2S-TiO2 and its photocatalytic degradation of ethyl paraben wastewater

At first, naked TiO₂ was prepared by sol-gel method. Silver nitrate and thiourea were respectively used as silver source and sulfur source added to form a TiO₂ sol and Ag₂S polymer blend system. Then, the properties of Ag₂S-TiO₂ was one-step synthesized and investigated by photocatalytic experiment and material characterization. According to the characterization results, Ag₂S-TiO₂ is anatase with a band gap of 3.14 eV, a specific surface area of 39.80 m²/g, and an average pore diameter of 3.56 nm. The results of photocatalytic experiments show that Ag₂S-TiO₂ can efficiently remove ethyl paraben within 2 h. Quenching experiments show that both •OH and photogenerated holes have a large effect on photocatalytic performance.

Photo-Fenton Degradation of AO7 and Photocatalytic Reduction of Cr(VI) over CQD-Decorated BiFeO3 Nanoparticles Under Visible and NIR Light Irradiation

In this work, the carbon quantum dot (CQD)-decorated BiFeO3 nanoparticle photocatalysts were prepared by a hydrothermal method. The TEM observation and XPS characterization indicate that the CQDs are well anchored on the surface of BiFeO3 nanoparticles. Acid orange 7 (AO7) and hexavalent chromium (Cr(VI)) were chosen as the model pollutants to investigate the photocatalytic/photo-Fenton degradation and photocatalytic reduction performances of the as-prepared CQD/BiFeO3 composites under visible and near-infrared (NIR) light irradiation. Compared with bare BiFeO3 nanoparticles, the CQD/BiFeO3 composites exhibit significantly improved photocatalytic and photo-Fenton catalytic activities. Moreover, the composites possess good catalytic stability. The efficient photogenerated charges separation in the composites was demonstrated by the photocurrent response and electrochemical impedance spectroscopy (EIS) measurements. The main active species involved in the catalytic degradation reaction were clarified by radicals trapping and detection experiments. The underlying photocatalytic and photo-Fenton mechanisms are systematically investigated and discussed.

Challenges and implication of full solar spectrum-driven photocatalyst

Conventional metal oxide and its composites embrace the long-standing problem of using the combined visible and near-infrared (NIR) light. Doping with suitable impurities of metal, nonmetal, or its combinations for visible light enhancement is very well studied. However, the quantum efficiency of these photocatalysts does not produce an exciting appearance toward visible and NIR light when irradiated through either artificial or natural light. Furthermore, owing to the limited availability of solar light, challenges arise from the implication of these developed nano-photocatalysts. Therefore, the hybridized concept was developed for the effective use of either full or partial solar spectrum, even functioning in dark conditions. The present review focuses on the challenges of hybridized photocatalysts in storing and discharging the harvested photons obtained from the solar spectrum. The review vividly emphasizes the evolution of light-driven nanomaterials since its innovation and significant breakthroughs in brief, while a detailed presentation of the implications of hybrid photocatalysts for full solar applications, including the mechanistic features, charging-discharging characteristics, work function, charge carrier mobility, and interactions, follows. The article also delivers the substantial contribution of these materials in regard to energy and environmental application.

Facile Preparation of CNT/Ag2S Nanocomposites with Improved Visible and NIR Light Photocatalytic Degradation Activity and Their Catalytic Mechanism

In this work, a series of carbon nanotubes (CNT)/Ag₂S hybrid nanocomposites were successfully prepared by a facile precipitation method. Transmission electron microscope (TEM) observation indicates that Ag₂S nanoparticles with an average particle size of ~25 nm are uniformly anchored on the surface of CNT. The photocatalytic activities of the CNT/Ag₂S nanocomposites were investigated toward the degradation of rhodamine B (RhB) under visible and near-infrared (NIR) light irradiation. It is shown that the nanocomposites exhibit obviously enhanced visible and NIR light photocatalytic activities compared with bare Ag₂S nanoparticles. Moreover, the recycling photocatalytic experiment demonstrates that the CNT/Ag₂S nanocomposites possess excellent photocatalytic stability. The photoelectrochemical and photoluminescence measurements reveal the efficient separation of photogenerated charges in the CNT/Ag₂S nanocomposites. This is the dominant reason behind the improvement of the photocatalytic activity. Based on active species trapping experiments, the possible photocatalytic mechanism of CNT/Ag₂S nanocomposites for dye degradation under visible and NIR light irradiation was proposed.

Synthesis of heterojunction photocatalysts composed of Ag 2 S quantum dots combined with Bi 4 Ti 3 O 12 nanosheets for the degradation of dyes

Facilitating the separation of photogenerated electron/hole pairs and widening the light-responsive region are crucial to enhance the overall photocatalytic performance of photocatalysts. To achieve this aim, here we have prepared Ag₂S/Bi₄Ti₃O₁₂ heterojunction composite photocatalysts by assembling Ag₂S quantum dots onto the surface of Bi₄Ti₃O₁₂ nanosheets. Transmission electron microscopy observation demonstrates that two types of Ag₂S quantum dots separately with size of 40-70 and 7-17 nm are uniformly assembled onto the surface of large-sized Bi₄Ti₃O₁₂ thin nanosheets. The as-prepared Ag₂S/Bi₄Ti₃O₁₂ heterojunction composites exhibit much enhanced light absorption (particularly in the visible and near-infrared region) and highly efficient separation of electrons and holes photogenerated in Bi₄Ti₃O₁₂. Rhodamine B (RhB) aqueous solution was chosen as the target organic pollutant to evaluate the photocatalytic performance of the samples under simulated sunlight irradiation. It is found that the Ag₂S/Bi₄Ti₃O₁₂ heterojunction composites manifest significantly enhanced photocatalytic activity toward the RhB degradaton. In particular, the 15wt% Ag₂S/Bi₄Ti₃O₁₂ composite exhibits the highest photocatalytic activity, which is ca. 2.8 and 4.0 times higher than bare Bi₄Ti₃O₁₂ and Ag₂S, respectively. The enhanced photocatalytic activity of the composites can be explained as a result of the Z-scheme electron transfer from the conduction band of Bi₄Ti₃O₁₂ to the valence band of Ag₂S, and thus more photogenerated holes in the valence band of Bi₄Ti₃O₁₂ and electrons in the conduction band of Ag₂S are able to participate in the photocatalytic reactions. Active species trapping experiments were carried out, from which it is concluded that photogenerated holes and •O₂^- radicals play the dominant and secondary role in the photocatalysis, respectively.

In situ Synthesis of Au-Induced Hierarchical Nanofibers/Nanoflakes Structured BiFeO3 Homojunction Photocatalyst With Enhanced Photocatalytic Activity

In order to further improve the photocatalytic performance of BiFeO₃ (BFO), novel Au-induced hierarchical nanofibers/nanoflakes structured BiFeO₃ homojunctions (Au_x-BFO, x = 0, 0. 6, 1.2, 1.8, 2.4 wt%) were in situ synthesized through a simple reduction method with assist of sodium citrate under the analogous hydrothermal environment. The effect of loading amount of Au nanoparticles (NPs) on the physicochemical properties and photocatalytic activity was investigated in detail. The Au_1.2-BFO NFs sample show the best photocatalytic activity (85.76%), much higher than that for pure BFO samples (49.49%), mainly due to the hierarchical nanofibers/nanoflakes structured homojunction, the surface plasmon resonance (SPR) effect of Au NPs, as well as the presence of defects (Fe²⁺/Fe³⁺ pairs and oxygen vacancy). Furthermore, the possible formation mechanism of the unique homojunction and the enhanced photocatalytic mechanism for the degradation of methylene blue (MB) dye are proposed. It is proven that holes (h⁺) play the decisive role in the photocatalytic process. The present work provides a fascinating way to synthesize efficient homojunctions for the degradation of organic pollutes.

Visible-to-NIR Photon Harvesting: Progressive Engineering of Catalysts for Solar-Powered Environmental Purification and Fuel Production

Utilization of diffusive solar energy through photocatalytic processes for environmental purification and fuel production has long been pursued. However, efficient capture of visible-near-infrared (NIR) photons, especially for those with wavelengths longer than 600 nm, is a demanding quest in photocatalysis owing to their relatively low energy. In recent years, benefiting from the advances in photoactive material design, photocatalytic reaction system optimization, and new emerging mechanisms for long-wavelength photon activation, increasing numbers of studies on the harnessing of visible-NIR light for solar-to-chemical energy conversion have been reported. Here, the aim is to comprehensively summarize the progress in this area. The main strategies of the long-wavelength visible-NIR photon capture and the explicitly engineered material systems, i.e., narrow optical gap, photosensitizers, upconversion, and photothermal materials, are elaborated. In addition, the advances in long-wavelength light-driven photo- and photothermal-catalytic environmental remediation and fuel production are discussed. It is anticipated that this review presents the forefront achievements in visible-NIR photon capture and at the same time promotes the development of novel visible-NIR photon harnessing catalysts toward efficient solar energy utilization.

Materials and Mechanisms of Photo-Assisted Chemical Reactions under Light and Dark Conditions: Can Day-Night Photocatalysis Be Achieved?

The photoassisted catalytic reaction, conventionally known as photocatalysis, is expanding into the field of energy and environmental applications. It is widely known that the discovery of TiO₂ -assisted photochemical reactions has led to several unique applications, such as degradation of pollutants in water and air, hydrogen production through water splitting, fuel conversion, cancer treatment, antibacterial activity, self-cleaning glasses, and concrete. These multifaceted applications of this phenomenon can be enriched and expanded further if this process is equipped with more tools and functions. The term "photoassisted" catalytic reactions clearly emphasizes that photons are required to activate the catalyst; this can be transcended even into the dark if electrons are stored in the material for the later use to continue the catalytic reactions in the absence of light. This can be achieved by equipping the photocatalyst with an electron-storage material to overcome current limitations in photoassisted catalytic reactions. In this context, this article sheds lights on the materials and mechanisms of photocatalytic reactions under light and dark conditions. The manifestation of such systems could be an unparalleled technology in the near future that could influence all spheres of the catalytic sciences.

Ag2S quantum dots in situ coupled to hexagonal SnS2 with enhanced photocatalytic activity for MO and Cr(vi) removal

A highly efficient visible-light-driven composite photocatalyst of Ag₂S quantum dots coupled to hexagonal SnS₂ exhibited considerably increased photocatalytic activity for MO and Cr(vi) removal.