Au-nanoparticle/nanopillars TiO2 meso-porous thin films in the degradation of tetracycline using UV-A light

Facile Synthesis to Porous TiO2 Nanostructures at Low Temperature for Efficient Visible-Light Degradation of Tetracycline

In this study, nanoporous TiO2 with hierarchical micro/nanostructures was synthesized on a large scale by a facile one-step solvothermal method at a low temperature. A series of characterizations was performed and carried out on the as-prepared photocatalysts, which were applied to the degradation of the antibiotic tetracycline (TC). The results demonstrated that nanoporous TiO2 obtained at a solvothermal temperature of 100 °C had a spherical morphology with high crystallinity and a relatively large specific surface area, composed of a large number of nanospheres. The nanoporous TiO2 with hierarchical micro/nanostructures exhibited excellent photocatalytic degradation activity for TC under simulated sunlight. The degradation rate was close to 100% after 30 min of UV light irradiation, and reached 79% only after 60 min of visible light irradiation, which was much better than the photodegradation performance of commercial TiO2 (only 29%). Moreover, the possible intermediates formed during the photocatalytic degradation of TC were explored by the density functional theory calculations and HPLC-MS spectra. Furthermore, two possible degradation routes were proposed, which provided experimental and theoretical support for the photocatalytic degradation of TC. In this study, we provide a new approach for the hierarchical micro/nanostructure of nanoporous TiO2, which can be applied in industrial manufacturing fields.

Study on the behavior and mechanism of NiFe-LDHs used for the degradation of tetracycline in the photo-Fenton process

An environment-friendly 3D NiFe-LDHs photocatalyst was fabricated via a simple hydrothermal method and characterized by means of SEM, XRD, BET, XPS and FT-IR. It is a highly efficient heterogeneous photo-Fenton catalyst for the degradation of TC-HCl under visible light irradiation. After exploring the effects of catalyst dosage, initial concentration of TC-HCl, solution pH and H2O2 concentrations, the optimal reaction conditions were determined. The experiment results showed that the degradation efficiency can reach 99.11% through adding H2O2 to constitute a photo-Fenton system after adsorption for 30 min and visible light for 60 min. After four cycles, the degradation rate decay is controlled within 21.2%, indicating that NiFe-LDHs have excellent reusable performance. The experimental results of environmental factors indicate that Fe2+ and Ca2+ promoted the degradation of TC-HCl, both Cl- and CO32- inhibited the degradation of TC-HCl. Two other antibiotics (OTC and FT) were selected for research and found to be effectively removed in this system, achieving effective degradation of a variety of typical new pollutants. The radical trapping tests and ESR detection showed that ·OH and ·O2- were the main active substances for TC degradation in the photo-Fenton system. By further measuring the intermediate products of photodegradation, the degradation pathway of TC-HCl was inferred. The toxicity analysis demonstrated that the overall toxicity of the identified intermediates was reduced in this system. This study provides a theoretical and practical basis for the removal of TC in aquatic environments.

Novel cubical Ag(NP) decorated titanium dioxide supported bentonite thin film in the efficient removal of bisphenol A using visible light

The persistent endocrine-disrupting chemical bisphenol A is posing serious health concerns; hence, it is known to be an emerging and potential water contaminant. The present investigation aims to synthesize novel cubical Ag(NP) decorated titanium dioxide-supported bentonite (Ag/TiO₂@Clay) nanocomposite using a novel synthetic process. The nanocomposite materials were characterized by several analytical methods viz., transmission electron microscopy (TEM), X-ray diffraction (XRD) analyses, energy-dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) and diffuse reflectance spectroscopy (DRS). Further, the photocatalytic removal of bisphenol A was conducted utilizing the thin film catalyst under the LED (light emitting diode; visible light) and UV-A (ultra violet-A) light sources. The parametric studies solution pH (6.0-12.0), pollutant concentrations (1.0-20.0 mg/L), and the interaction of several scavengers and co-existing ions are studied extensively to demonstrate the insights of the removal mechanism. The mineralization of bisphenol A and repeated use of the thin film catalyst showed the potential usage of photocatalysts in the devised large-scale operations. Similarly, the natural matrix treatment was performed to evaluate the suitability of the process for real implications.

Zinc hydroxystannate/zinc-tin oxide heterojunctions for the UVC-assisted photocatalytic degradation of methyl orange and tetracycline

Partial phase modification of zinc hydroxystannate (ZHS) is an effective technique for improving its light absorption capacity. In this study, a zinc hydroxystannate/zinc-tin oxide (ZHS/ZTO) heterostructure was synthesized via chemical co-precipitation followed by annealing. The as-prepared heterostructure revealed cubic crystal morphology along with high-intensity diffraction peaks in the XRD pattern. The XPS analysis of ZHS/ZTO heterostructures demonstrated the presence of key elements (Zn, Sn, and O) in their most stable ionic forms. The photocatalytic degradation efficiencies of the prepared samples were tested against methyl orange (MO) and tetracycline (TC) in an aqueous medium under UVC (254 nm) radiation. Under optimized conditions, maximum degradation efficiencies of 99% for MO and 97% for TC were observed in 120 and 180 min, respectively. Further, the predominant role of OH˙ radicals in the photocatalytic removal of MO and TC was evident through scavenging experiments. 2nd order kinetic model was outperformed in simulating the degradation mechanism of both targets over 1st and zero-order kinetic models. Finally, a photocatalytic degradation mechanism is proposed based on the energy values estimated for the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) using UPS analysis.

Integrated Adsorption-Photocatalytic Decontamination of Oxytetracycline from Wastewater Using S-Doped TiO2/WS2/Calcium Alginate Beads

Integrated wastewater treatment processes are needed due to the inefficient removal of emerging pharmaceuticals by single methods. Herein, an adsorbent-photocatalyst integrated material was fabricated by coupling calcium alginate with sulfur-doped TiO2/tungsten disulfide (S-TiO2/WS2/alginate beads) for the removal of oxytetracycline (OTC) from aqueous solution by an integrated adsorption-photocatalysis process. The semiconductor S-TiO2/WS2 hybrid photocatalyst was synthesized with a hydrothermal method, while the integrated adsorbent-photocatalyst S-TiO2/WS2/alginate beads were synthesized by blending S-TiO2/WS2 with sodium alginate using calcium chloride as a precipitating agent. The physicochemical characteristics of S-TiO2/WS2/alginate beads were analyzed using X-ray diffraction , scanning electron microscopy, elemental mapping, X-ray photoelectron spectroscopy, and photoluminescence spectroscopy. The integrated adsorption-photocatalysis process showed enhanced removal from 92.5 to 72%, with a rise in the OTC concentration from 10 to 75 mg/L respectively. The results demonstrated that the adsorption of OTC onto S-TiO2/WS2/alginate beads followed the Elovich kinetic model and Redlich–Peterson isotherm models. The formations of H-bonds, cation bridge bonding, and n-π electron donor-acceptor forces were involved in the adsorption of OCT onto S-TiO2/WS2/alginate beads. In the integrated adsorption-photocatalysis, surface-adsorbed OTC molecules were readily decomposed by the photogenerated active radical species (h⁺, O2•−, and HO•). The persulfate addition to the OTC solution further increased the photocatalysis efficacy due to the formation of additional oxidizing species (SO4•⁻, SO4⁻). Moreover, S-TiO2/WS2/alginate beads showed favorable efficiency and sustainability in OTC removal, approaching 78.6% after five cycles. This integrated adsorption-photocatalysis process offered significant insight into improving efficiency and reusability in water treatment.

Noble metal-doped TiO2 thin films in the efficient removal of Mordant Orange-1: insights of degradation process

Nanocomposite Ag⁰(NPs)/TiO₂ is synthesised in a facile template method enabling nanoparticles of reduced Ag evenly distributed within the titania network. The morphological studies of nanocomposites were extensively performed employing SEM/EDX (scanning electron microscopy/energy dispersive X-ray), TEM (transmission electron microscopy) and AFM (atomic force microscopy). Moreover, the bandgap energies of materials were obtained using the diffuse reflectance spectrometer (DRS). The newer insights in the photocatalytic elimination of Mordant Orange-1 (MO1) was obtained using the nanocomposite thin film for various parametric studies utilising the UV-A and LED illuminations. The kinetics of degradation of MO1 was performed, and the rate constant was favoured at lower concentrations of MO1. Moreover, the elimination efficiency of MO1 was favoured with a decrease in solution pH. The NPOC results inferred that a fairly good extent of MO1 was mineralised using a thin-film catalyst for both the UV-A and LED illuminations. The minimal effect of several co-ions demonstrated the applicability of thin films in the elimination of MO1, and the stability of the thin film has shown the potential applicability of thin-film catalysts. Further, the mechanism of photocatalytic degradation was demonstrated with the radical scavenger studies and ascertained the reaction pathways.

N-TiO2-δ/g-C3N4 Dual Photocatalysts for Efficient Oxytetracycline Hydrochloride Photodegradation and CO2 Photoreduction

A series of $x\%$ (wt) N-TiO2-δ/g-C3N4 composites was synthesized by calcination and hydrothermal methods (labeled $x$ TiCN, $x$ : 5, 10, and 15). All composites were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, UV-vis diffuse reflectance spectroscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. The photocatalytic activity of these composites was evaluated through oxytetracycline hydrochloride (denoted as OTC) photodegradation and CO2 photoreduction. The $x$ TiCN composites exhibited higher OTC photodegradation than bulk g-C3N4. 10TiCN was slightly more active than 5TiCN and 15TiCN, with a photodegradation yield of 97% after 5 h of light irradiation and constant rate of 0.647 h-1. For CO2 photoreduction, it was observed that 5TiCN exhibited the highest activity among the synthesized composites, with 7.0 ppm CH4 formed. This CH4 concentration was 7.8 times higher than the concentration formed by bulk g-C3N4 (0.9 ppm). A $Z$ -scheme mechanism was proposed to explain the enhanced photocatalysis by $x\%$ (wt) N-TiO2-δ/g-C3N4 composites. The $Z$ -scheme structure increased redox ability, caused better separation of photogenerated electron-hole pairs, and broadened the light absorption zone of the photocatalysts.

In situ composite of Co-MOF on a Ti-based material for visible light multiphase catalysis: synthesis and the photocatalytic degradation mechanism

A Co-MOF/Ti-based Z-type heterojunction prepared by an in situ growth method exhibits good photocatalytic activity for tetracycline.

Effect of UVC and UVA Photocatalytic Processes on Tetracycline Removal Using CuS-Coated Magnetic Activated Carbon Nanocomposite: A Comparative Study

In this study, we synthesized a novel MAC nanocomposite using almond’s green hull coated with CuS. The whole set of experiments have been conducted inside a batch (discontinuous reactor system) at room temperature. The effectiveness of different parameters in tetracycline removal pH (3, 5, 7, and 9), pollutant concentration (5–100 mg/L), nanocomposite dosage (0.025–1 g/L), and contact time (5–60 min) using newly synthesized nanocomposite were investigated. Based on the results, in the optimal conditions of pH = 9, nanocomposite dosage of 1 g/L, pollutant concentration of 20 mg/L, contact time of 60 min, and room temperature, 95% removal efficiency was obtained. In MAC/CuS/UV_C process, the removal of COD and TOC were 76.89% and 566.84% respectively meanwhile, these values in MAC/CuS/UV_A process were 74.19% and 62.11%, respectively. The results of nanocomposite stability and magnetic recovery illustrated that the removal efficiency was reduced by 1.5% in the presence of UV_C and 5% in the presence of UV_A lights during all six cycles. Therefore, this nanocomposite was highly capable of recycling and reuse. It can be concluded that considering the high potential of the synthesized nanocomposite, the photocatalytic efficiency of the MAC/CuS/UV_C process in tetracycline synthesis was higher than MAC/CuS/UV_A process.

A Review on Metal Ions Modified TiO2 for Photocatalytic Degradation of Organic Pollutants

TiO2 is a semiconductor material with high chemical stability and low toxicity. It is widely used in the fields of catalysis, sensing, hydrogen production, optics and optoelectronics. However, TiO2 photocatalyst is sensitive to ultraviolet (UV) light; this is why its photocatalytic activity and quantum efficiency are reduced. To enhance the photocatalytic efficiency in the visible light range as well as to increase the number of the active sites on the crystal surface or inhibit the recombination rate of photogenerated electron–hole pairs electrons, various metal ions were used to modify TiO2. This review paper comprehensively summarizes the latest progress on the modification of TiO2 photocatalyst by a variety of metal ions. Lastly, the future prospects of the modification of TiO2 as a photocatalyst are proposed.

New insights in photocatalytic removal of Alizarin Yellow using reduced Ce3+/TiO2 catalyst

The present communication aims to obtain a novel Ce³⁺/TiO₂ thin film in a single step facile method using the in situ template process. The material was characterized by the XRD (X-ray diffraction), XPS (X-ray photoelectron spectroscopy), TEM (transmission electron microscope), and AFM (atomic force microscope) analyses. The thin film catalyst was intended to introduce in the degradation of one of potential dye Alizarin Yellow from aqueous solutions using the UV-A radiations. The mechanisms of degradation along with the physicochemical parametric studies were conducted extensively. The mineralization of pollutant and the replicate use of catalysts further enhance the applicability of present communication. Additionally, the real matrix treatment was conducted to simulate the treatment process.

Improving Photocatalytic Performance Using Nanopillars and Micropillars

A recent research emphasis has been placed on the development of highly crystallized nanostructures as a useful technology for many photocatalytic applications. With the unique construction of semiconductor transition metal oxide nanostructures in the form of nanopillars-artificially designed pillar-shaped structures grouped together in lattice-type arrays-the surface area for photocatalytic potential is increased and further enhanced through the introduction of dopants. This short review summarizes the work on improving the efficiency of photocatalyst nanopillars through increased surface area and doping within the applications of water splitting, removal of organic pollutants from the environment, photoswitching, soot oxidation, and photothermalization.

Synthesis and characterization of Ag0(NPs)/TiO2 nanocomposite: insight studies of triclosan removal from aqueous solutions

Nanocomposite mesoporous Ag⁰(NPs)/TiO₂ thin film materials were synthesized and assessed for its efficient application in the elimination of potentially important drug triclosan from aqueous solutions. A template synthesis using the polyethylene glycol was enabled to obtain Ag⁰(NPs)/TiO₂ nanocomposite materials where zerovalent Ag was in situ doped to the titania network. The nanocomposite materials were characterized by the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX), transmission electron microscope (TEM), EDX elemental mapping, X-ray diffraction (XRD) analyses and Brunauer-Emmett-Teller (BET) methods. Further, the diffuse reflectance spectroscopy (DRS) was introduced to estimate the band gap of these solids. The thin film materials were subjected to the remediation of water contaminated with triclosan using the UV-A light. The oxidative elimination of triclosan was demonstrated as a function of pH, concentration of triclosan and presence of several co-existing ions. Increase in pH (4.0-10.0) and triclosan concentrations (0.5-15.0 mg/L) had decreased significantly the percentage degradation of triclosan. The pseudo-first-order kinetics was shown in the degradation of triclosan and rate constant was significantly decreased with the increase in pollutant concentration (0.5-15.0 mg/L) and pH (4.0-10.0). The 1000 times presence of scavengers showed that ^•OH were, predominantly, caused the oxidation of triclosan. Moreover, multiple application of nanocomposite Ag⁰(NPs)/TiO₂(B) revealed that the thin film was fairly intact since the photocatalytic efficiency of triclosan removal was almost unaffected.

Photocatalytic degradation of sulfamethoxazole using TiO2 in simulated seawater: Evidence for direct formation of reactive halogen species and halogenated by-products

Nowadays photoactivation mechanism of titanium dioxide nanoparticles (TiO₂ NPs) and reactive species involved in saline waters is not sufficiently established. In this study, TiO₂ photocatalytic process under simulated solar irradiation was evaluated in synthetic seawater and compared with deionized water, using sulfamethoxazole (SMX) as model organic compound. For a TiO₂ concentration of 100 mg L^-1, SMX degradation resulted two times slower in seawater than in deionized water by the determination of their pseudo-first order rate constants of 0.020 min^-1 and 0.041 min^-1, respectively. Selected scavenging experiments revealed no significant contribution of hydroxyl radicals (OH) on the degradation process in seawater, while these radicals contributed to circa 60% on the SMX depletion in deionized water. Instead, the involvement of reactive halogen species (RHS) as main contributors for the SMX degradation in seawater could be established. A mechanism for the RHS generation was proposed, whose initiation reactions involve halides with the TiO₂ photogenerated holes, yielding chlorine and bromine radicals (Cl and Br) that may later generate other RHS. Production of RHS was further confirmed by the identification of SMX transformation products (TPs) and their evolution over time, carried out by liquid chromatography-mass spectrometry (LC-MS). SMX transformation was conducted through halogenation, dimerization and oxidation pathways, involving mainly RHS. Most of the detected transformation products accumulated over time (up to 360 min of irradiation). These findings bring concerns about the viability of photocatalytic water treatments using TiO₂ NPs in saline waters, as RHS could be yielded resulting in the generation and accumulation of halogenated organic byproducts.

Sonocatalytic degradation of tetracycline antibiotic using zinc oxide nanostructures loaded on nano-cellulose from waste straw as nanosonocatalyst

The aim of the present investigation was the combination of ZnO nanostructures with nano-cellulose (NC) for the efficient degradation of tetracycline (TC) antibiotic under ultrasonic irradiation. The removal efficiency of 12.8% was obtained by the sole use of ultrasound (US), while the removal efficiency increased up to 70% by the US/ZnO treatment process. Due to the integration of ZnO nanostructures with NC, the removal efficiency of 87.6% was obtained within 45 min. The removal efficiency substantially decreased in the presence of tert-butyl alcohol (more than 25% reduction), indicating that ^radOH-mediation oxidation is responsible for the degradation of TC molecules. Peroxymonosulfate (PMS) led to the most enhancing effect on the removal of TC among percarbonate, persulfate and periodate ions. The addition of PMS caused the degradation efficiency of 96.4% within the short contact time of 15 min. The bio-toxicity examination on the basis of inhibition test conducted on activated sludge revealed diminishing the oxygen consumption inhibition percent [I_OUR (%)] from 33.6 to 22.1% during the US/ZnO/NC process. Consequently, the utilization of the US/ZnO/NC process can convert TC molecules to less toxic compounds. However, longer reaction time is required for complete conversion into non-toxic substances.

Mechanistic evaluation of heterocyclic aromatic compounds mineralization by a Cu doped ZnO photo-catalyst

In this study, a Cu doped ZnO photo-catalyst was used for the degradation of the heterocyclic compounds, pyridine and quinoline.