A novel antibacterial mixed matrixed PES membrane fabricated from embedding aminated Ag3PO4/g-C3N4 nanocomposite for use in the membrane bioreactor

Critical review on emerging photocatalytic membranes for pollutant removal: From preparation to application

Due to synergistically enhanced separation and degradation performances, photocatalytic membranes offer an environmentally friendly and energy-sustainable method for water purification. However, a comprehensive review on preparation and application of photocatalytic membranes is still lacking. Systematically comparing different photocatalytic membrane fabrication methods and revealing the underlying mechanisms of their respective applications are of particular interest. In this review, we first discuss the common preparation methods for photocatalytic membranes in detail, focusing on the main approaches to improve their photocatalytic performance. We elucidate the mechanisms of photocatalytic membrane-based degradation processes, and describe some representative applications of photocatalytic membranes in water treatment. At the same time, the influencing factors that are critical for achieving high removal efficiency are also proposed. In the end, the practical applications and the perspectives for future studies and implementation of photocatalytic membranes are evaluated. This review will serve as a summary to advance researchers' understanding of the advantages of photocatalytic membranes, with the ultimate goal of achieving large-scale relevant applications of photocatalytic membranes in water treatment.

Mechanisms and Strategies of Advanced Oxidation Processes for Membrane Fouling Control in MBRs: Membrane-Foulant Removal versus Mixed-Liquor Improvement

Membrane bioreactors (MBRs) are well-established and widely utilized technologies with substantial large-scale plants around the world for municipal and industrial wastewater treatment. Despite their widespread adoption, membrane fouling presents a significant impediment to the broader application of MBRs, necessitating ongoing research and development of effective antifouling strategies. As highly promising, efficient, and environmentally friendly chemical methods for water and wastewater treatment, advanced oxidation processes (AOPs) have demonstrated exceptional competence in the degradation of pollutants and inactivation of bacteria in aqueous environments, exhibiting considerable potential in controlling membrane fouling in MBRs through direct membrane foulant removal (MFR) and indirect mixed-liquor improvement (MLI). Recent proliferation of research on AOPs-based antifouling technologies has catalyzed revolutionary advancements in traditional antifouling methods in MBRs, shedding new light on antifouling mechanisms. To keep pace with the rapid evolution of MBRs, there is an urgent need for a comprehensive summary and discussion of the antifouling advances of AOPs in MBRs, particularly with a focus on understanding the realizing pathways of MFR and MLI. In this critical review, we emphasize the superiority and feasibility of implementing AOPs-based antifouling technologies in MBRs. Moreover, we systematically overview antifouling mechanisms and strategies, such as membrane modification and cleaning for MFR, as well as pretreatment and in-situ treatment for MLI, based on specific AOPs including electrochemical oxidation, photocatalysis, Fenton, and ozonation. Furthermore, we provide recommendations for selecting antifouling strategies (MFR or MLI) in MBRs, along with proposed regulatory measures for specific AOPs-based technologies according to the operational conditions and energy consumption of MBRs. Finally, we highlight future research prospects rooted in the existing application challenges of AOPs in MBRs, including low antifouling efficiency, elevated additional costs, production of metal sludge, and potential damage to polymeric membranes. The fundamental insights presented in this review aim to elevate research interest and ignite innovative thinking regarding the design, improvement, and deployment of AOPs-based antifouling approaches in MBRs, thereby advancing the extensive utilization of membrane-separation technology in the field of wastewater treatment.

Optimization of isotropic MoS2/PES membranes for efficient treatment of industrial oily wastewater

Elimination of tiny oil droplets nearly miscible with wastewater can be realized using membrane technology through ultrafiltration. The novelty of this work was to blend different phases of molybdenum disulfide (MoS2) in isotropic polyethersulfone (PES). We prepared isotropic PES membranes by optimizing nonsolvent vapour-induced phase separation (VIPS). Membranes were blended with MoS2 nanosheets of different phases to promote separation performance and antifouling resistance. FE-SEM revealed the flower-like surface morphology of MoS2 nanosheets. HR-TEM of MoS2 revealed 2H domains in the monolayer, flakes of a few layers and a d-spacing of 0.22 nm. Raman spectroscopy could be used to distinguish mixed-phase MoS2 from single-phase MoS2. Isotropic PES membranes modified with 70% 1T/2H MoS2 had a significantly high permeance to pure water (6911 kg m-2 h bar). The same membrane possessed a high efficiency of oil rejection of 98.78%, 97.85%, 99.83% for emulsions of industrial crude oil at 100, 1000 and 10 000 mg L-1, respectively. Removal of oil droplets from wastewater was dominated by a mechanism based on size exclusion. Isotropic PES modified with 2H MoS2 possessed superior oleophilicity, which resulted in low rejection of crude oil. Modified membranes showed excellent fouling resistance for three successive filtration cycles, as evidenced by enhanced antifouling parameters. Our study reveals how the phase composition of MoS2 nanosheets can significantly affect the performance of isotropic PES membranes during the ultrafiltration of oily wastewater.

Antimicrobial Nanoparticles Mediated Prevention and Control of Membrane Biofouling in Water and Wastewater Treatment: Current Trends and Future Perspectives

Global water scarcity and water pollution necessitate wastewater reclamation for further use. As an alternative to conventional techniques, membrane technology is extensively used as an advanced method for water purification and wastewater treatment due to its selectivity, permeability, and efficient removal of pollutants. However, microbial biofouling is a major threat that deteriorates membrane performance and imparts operational challenges. It is a natural phenomenon caused by the undesirable colonization of microbes on membrane surfaces. The economic penalties associated with this menace are enormous. The traditional preventive measures are dominated by biocides, toxic chemicals, cleaners and antifouling surfaces, which are costly and often cause secondary pollution. Recent focus is thus being directed to promote inputs from nanotechnology to control and mitigate this major threat. Different anti-microbial nanomaterials can be effectively used to prevent the adhesion of microbes onto the membrane surfaces and eliminate microbial biofilms, to provide an economical and eco-friendly solution to biofouling. This review addresses the formation of microbial biofilms and biofouling in membrane operations. The potential of nanocomposite membranes in alleviating this problem and the challenges in commercialization are discussed. The antifouling mechanisms are also highlighted, which are not widely elucidated.

Efficiency evaluation of titanium oxide nanocomposite membrane in adsorption of chromium from oil effluents

Reverse osmosis and nanofiltration (NF) are the essential physical separation technologies used to remove contaminants from liquid streams. A hybrid of nanofiltration and forward osmosis (FO) was used to increase the removal efficiency of heavy metals in synthesized oil effluents. Thin-film nanocomposite (TFN) membranes were synthesized by applying surface polymerization on a polysulfone substrate to use in the forward osmosis process. The impact of different membrane fabrication conditions such as time, temperature, and pressure on effluent flux, the effect of different concentrations of the heavy metal solution on adsorption rate and sedimentation rate, the impact of TiO₂ nanoparticles on the performance and structure of forward osmosis membranes were investigated. The morphology, composition, and properties of TiO₂ nanocomposites made by the infrared spectrometer and X-ray diffraction (XRD) were studied. Kinetic modeling and Langmuir, Freundlich, and Tamkin relationships were used to draw adsorption isotherms and evaluate adsorption equilibrium data. The results indicated that pressure and temperature directly affect water outlet flux, and time affects it indirectly. Evaluating the isothermal relationships revealed that chromium adsorption from the TFN 0.05 ppm membrane and thin-film composite (TFC) membrane follows the Langmuir model with correlation coefficients of 0.996 and 0.995, respectively. The significant removal of heavy metals and the acceptable amount of water flux demonstrated the appropriate potential of the titanium oxide nanocomposite membrane, which can be used as an effective adsorbent to remove chromium from aqueous solutions.

Biotechnological advancements towards water, food and medical healthcare: A review

The global health status is highly affected by the growing pace of urbanization, new lifestyles, climate changes, and resource exploitation. Modern technologies pave a promising way to deal with severe concerns toward sustainable development. Herein, we provided a comprehensive review of some popular biotechnological advancements regarding the progress achieved in water, food, and medicine, as the most substantial fields related to public health. The emergence of novel organic/inorganic materials has brought about significant improvement in conventional water treatment techniques, anti-fouling approaches, anti-microbial agents, food processing, biosensors, drug delivery systems, and implants. Particularly, a growing interest has been devoted to nanomaterials and their application for developing novel structures or improving the characteristics of standard components. Also, bioinspired materials have been widely used to improve the performance, efficiency, accuracy, stability, safety, and cost-effectiveness of traditional systems. On the other side, the fabrication of innovative devices for precisely monitoring and managing various ecosystem and human health issues is of great importance. Above all, exceptional advancements in designing ion-selective electrodes (ISEs), microelectromechanical systems (MEMs), and implantable medical devices have altered the future landscape of environmental and biomedical research. This review paper aimed to shed light on the wide-ranging materials and devices that have been developed for health applications and mainly focused on the impact of nanotechnology in this field.

Nanomaterials in membrane bioreactors: Recent progresses, challenges, and potentials

The use of nanomaterials (NMs) in the fabrication and modification of membranes as well as the coupling of nanomaterial-based processes with membrane processes have been attracted many researchers today. The NMs due to a wide range of types, different chemistry, the possibility of various kinds of functionality, different properties like antibacterial activity, hydrophilicity, and large surface area were applied to enhance the membrane properties. In the membrane bioreactors (MBRs) as a highly successful process of membrane technology in wastewater treatment, the NMs have been applied for improving the efficiency of MBR process. This review assessed the application of NMs both as the modifiers of membrane and as the effective part of hybrid techniques with MBR system for wastewater treatment. The efficiency of NMs blended membranes in the MBR process has been reviewed in terms of antifouling and antibacterial improvement and removal performance of the pollutants. Novel kinds of NMs were recognized and discussed based on their properties and advantages. The NMs-based photocatalytic and electrochemical processes integrated with MBR were reviewed with their benefits and drawbacks. In addition, the effect of the presence of mobilized NPs in the sludge on MBR performance was surveyed. As a result of this review, it can be concluded that nanomaterials generally improve MBR performance. The high flux and antifouling properties can be obtained by adding nanomaterials with hydrophilic and antibacterial properties to the membrane, and further studies are required for photocatalytic NMs applications. In addition, this review shows that the low amounts of NMs in the membrane structure could have an effective influence on the MBR process. Besides, since many studies in the literature are carried out at the laboratory scale, it is thought that pilot and real-scale studies should be carried out to obtain more reliable data.

Green route for recycling of low-cost waste resources for the biosynthesis of nanoparticles (NPs) and nanomaterials (NMs)-A review

Nowadays, nanoparticles (NPs) and nanomaterials (NMs) are used extensively in various streams such as medical science, solar energy, drug delivery, water treatment, and detection of persistent pollutants. Intensive synthesis of NPs/NMs carried out via physico-chemical technologies is deteriorating the environment globally. Therefore, an urgent need to adopt cost-effective and green technologies to synthesize NPs/NMs by recycling of secondary waste resources is highly required. Environmental wastes such as metallurgical slag, electronics (e-waste), and acid mine drainage (AMD) are rich sources of metals to produce NPs. This concept can remediate the environment on the one hand and the other hand, it can provide a future roadmap for economic benefits at industrial scale operations. The waste-derived NPs will reduce the industrial consumption of limited primary resources. In this review article, green emerging technologies involving lignocellulosic waste to synthesize the NPs from the waste streams and the role of potential microorganisms such as microalgae, fungi, yeast, bacteria for the synthesis of NPs have been discussed. A critical insight is also given on use of recycling technologies and the incorporation of NMs in the membrane bioreactors (MBRs) to improve membrane functioning and process performance. Finally, this study aims to mitigate various persisting scientific and technological challenges for the safe disposal and recycling of organic and inorganic waste for future use in the circular economy.

Hyperbranched polyethylenimine functionalized silica/polysulfone nanocomposite membranes for water purification

Hyperbranched polyethyleneimine functionalized silica (PEI-SiO2) nanoparticles with considerable hydrophilicity were synthesized and incorporated into a polysulfone (PSF)/dimethylacetamide (DMA)/polyvinylpyrrolidone (PVP) membrane casting solution in five different ratios to fabricate PEI-SiO2/PSF nanocomposite membranes using nonsolvent-induced phase separation. The hydrophilic PEI-SiO2 nanoparticles were characterized by TEM, FTIR, TGA, and XPS analyses. Morphology, water contact angles, mean pore sizes, overall porosity, tensile strengths, water flux, antifouling and the dye separation performances of the PEI-SiO2/PSF membranes were also studied. The PEI-SiO2 nanoparticles were uniformly dispersed in the PSF-based membranes, where a fall in the water contact angle was observed from 65.4° to 49.7° by addition of 2 wt% nanoparticles. The fouling resistance parameters of the PEI-SiO2/PSF membranes were declined with an increase in the nanoparticle concentration, suggesting the superior hydrophilic nature of the PEI-SiO2 nanoparticles. The permeability of the nanocomposite membranes was increased from 38.5 to 70 L m-2 h-1 bar-1 by incorporation of 2 wt% PEI-SiO2. Finally, improvements were observed in the flux recovery ratio (95.8%), Reactive Green 19 dye rejection (99.6%) and tensile strengths of the PEI-SiO2/PSF membranes over the neat PSF and SiO2/PSF membranes, which were used as controls. The results of this study demonstrate the promising application of PEI-SiO2 nanoparticles in improving the separation and antifouling performances of the PSF membranes for water purification.

Effect of carbon nitride synthesized by different modification strategies on the performance of carbon nitride/PVDF photocatalytic composite membranes

Carbon nitride (CN)/polyvinylidene fluoride (PVDF) photocatalytic composite membrane (PCM) is considered as a promising candidate to improve the anti-fouling characteristic of conventional PVDF membrane and overcome the difficulty encountered during recovery of powder catalyst simultaneously. However, the effects of differently-modified CN on PCM and its mechanism are still unclear. In this study, bulk-CN (BCN), carbon defects CN (CCN), nitrogen defect CN (DCN), mesoporous CN (MCN), and nitrogen-rich CN (NCN) were incorporated into PVDF by phase inversion method. The influence of changes in the physical and chemical properties of CN, including hydrophilic groups, photocatalytic activity, and particle size, on the permeability, anti-fouling characteristic, and photocatalytic self-cleaning activity of CN/PVDF was systematically analyzed. The mechanism of excellent performance of PCM was revealed by experimental test and theoretical calculation. The flux of PCM was significantly improved by increasing the hydrophilic group on modified CN. However, the differences in particle size and interaction between different types of modified CN and PVDF chains endowed the CN/PVDF with different porosity. DCN/PVDF showed high porosity and hydrophilicity, leading to high water flux and rejection rate of 293.6 L (m² h)^-1 and 90.1%, respectively. Compared to pure PVDF, the flux recovery rate of DCN₃₀/PVDF increased by 27.6%, and the irreversible fouling decreased from 36.9% to 9.2%. The modified CN/PVDF showed excellent photocatalytic activity for the removal of cefotaxime (CFX) and E. coli. Owing to the narrow band gap of DCN, large specific surface area, and low photogenerated carrier recombination rate, the CFX removal rate reached 99% in 2 h, and E. coli inactivation achieved 3.7 log within 4 h via DCN₃₀/PVDF.

Semiconducting graphitic carbon nitride integrated membranes for sustainable production of clean water: A review

Semiconducting membranes integrated with nanomaterials have placed themselves in new emerging researches tremendously for seawater desalination, oil-water separation, disinfection, removal of inorganic as well as organic pollutants. Howbeit, only nanoparticles unified membranes show quite a lot lags in their performance, although some of these particles associated with the demerits of high cost. In contrast, graphitic carbon nitride incorporated membranes offered improved aforementioned properties corresponding to absolute essential qualities such as cost-effective, environmentally friendly, easy-to-operate, green manufacturing, anti-fouling, and low energy consumption. Moreover, their high mechanical strength, high stability against harsh environment and long-term utilization without flux reduction are strong plus. Even though there are some undeniable downsides of these membranes in real world applications as bulk synthesis, consistent dispersion of graphitic carbon nitride, low photocatalytic efficiency etc. Accordingly, in the present article, these frailties of the membranes having graphitic carbon nitride as a filler and their respective synthesis procedures and properties are discussed. A comprehensive analysis over the application of semiconducting graphitic carbon nitride incorporated membranes with and without special surface modification; and exploration of the future challenges and difficulties associated to these membranes are also reviewed. Consequently, the current article provides brief overview about graphitic carbon nitride integrated composite membranes as well as their applications, and it finished up with new thoughts of further improvements/modifications to overcome their shortcomings in actual environmental conditions.

Recent development of photocatalytic nanomaterials in mixed matrix membrane for emerging pollutants and fouling control, membrane cleaning process

Membrane-based separation is an area of extensive research in wastewater treatment, which includes the control of pollution and reuse of water. The fabrication and modification membranes for prevention and reduction of pollution to provide quality water with fouling-free membranes through the wastewater treatment are the progressive approaches in the industries. Several research works have been extensively working on modification and fabrication polymer membranes with integration of advanced oxidation process (AOP) to overcome the membrane fouling. This review describes the modification of membranes with various nanomaterials such as inorganic and modified carbon which can be used for pollution control and enhance the anti-fouling properties of ultrafiltration membranes. The effects on nanomaterials loading percentage, nanomaterials interaction with the polymers and rejection performances of the surface tuned membrane are elaborated. Secondly, the fouled membrane chemical cleaning process and NaOCl adverse effect on polymer structure are critically investigated. Moreover, state-of-art in the photocatalytic self-cleaning process are reviewed in this manuscript, and future perspectives on fouling mitigation based on AOP integrated membrane technology have also discussed.

Hydrogen peroxide treated g-C3N4 as an effective hydrophilic nanosheet for modification of polyethersulfone membranes with enhanced permeability and antifouling characteristics

In this study, first, graphitic carbon nitride was treated with hydrogen peroxide (abbreviated as H₂O₂-g-C₃N₄), then was used as a new hydrophilic nanomaterial in the fabrication of polyethersulfone (PES) mixed matrix membrane (MMM) for improving flux, protein and dye separation efficiency and antifouling properties. The H₂O₂-g-C₃N₄ nanosheet was inserted into the doping solution to fabricate PES/H₂O₂-g-C₃N₄ nanocomposite membrane with the non-solvent induced phase inversion procedure. The results of the SEM and AFM images and also porosity and contact angle analysis were indicated that the modified membranes with H₂O₂-g-C₃N₄ had more porosity, smoother surface and more hydrophilic. Also, the influence of various weight percentage of H₂O₂-g-C₃N₄ was investigated systematically on the membrane performance. By blending of H₂O₂-g-C₃N₄ nanosheet in the membrane matrix, the permeability was raised from 4.1 (for bare membrane) to 30.1 L m^-2 h^-1 bar^-1. Additionally, the effect of the H₂O₂-g-C₃N₄ material on the antifouling features indicated that the flux recover ratio of the H₂O₂-g-C₃N₄ MMMs was improved and the resistance parameters were reduced. Also, the effect of the H₂O₂-g-C₃N₄ material on the antifouling features indicated that the flux recover ratio of the H₂O₂-g-C₃N₄ MMMs was improved and the resistance parameters were reduced. Finally, the dye rejection efficiency of the nanocomposite membranes for Orange II and Reactive Yellow 168 was improved. As a result, it could be mentioned that the mixing low amount of H₂O₂-g-C₃N₄ in the membrane structure could significantly improve the membrane flux and antifouling properties without reduction in membrane rejection efficiency.

Advances in the Synthesis and Application of Anti-Fouling Membranes Using Two-Dimensional Nanomaterials

This article provides a comprehensive review of the recent progress in the application of advanced two-dimensional nanomaterials (2DNMs) in membranes fabrication and application for water purification. The membranes fouling, its types, and anti-fouling mechanisms of different 2DNMs containing membrane systems are also discussed. The developments in membrane synthesis and modification using 2DNMs, especially graphene and graphene family materials, carbon nanotubes (CNTs), MXenes, and others are critically reviewed. Further, the application potential of next-generation 2DNMs-based membranes in water/wastewater treatment systems is surveyed. Finally, the current problems and future opportunities of applying 2DNMs for anti-fouling membranes are also debated.

An electrochemiluminescence aptasensor for diethylstilbestrol assay based on resonance energy transfer between Ag3PO4-Cu-MOF(II) and silver nanoparticles

In this work, a novel electrochemiluminescence (ECL) aptasensor based on the resonance energy transfer (RET) effect between Ag3PO4-Cu-MOF (ii) and silver nanoparticles (Ag NPs) is proposed. The ECL emission spectra of Ag3PO4-Cu-MOF and the ultraviolet absorption spectra of Ag NPs showed a good spectral overlap. Based on this, we designed an "on-off-on" ECL sensing strategy for the sensitive and specific detection of diethylstilbestrol (DES). Under the optimal conditions, the linear range of the sensor for DES detection was 1.0 × 10-12-1.0 × 10-4 M, with a detection limit of 7.2 × 10-13 M (S/N = 3). The method showed simple and fast operation, high sensitivity and selectivity, a strong anti-interference ability and good stability. More importantly, the developed aptasensor exhibited excellent recognition towards residual DES in actual water samples. The sensor has superior measurement capability and potential application value in the field of environment water quality monitoring.

Recent advances in graphite carbon nitride-based nanocomposites: structure, antibacterial properties and synergies

Bacterial infections and transmission threaten human health and well-being. Graphite carbon nitride (g-C₃N₄), a promising photocatalytic antibacterial nanomaterial, has attracted increasing attention to combat bacterial transmission, due to the outstanding stability, high efficiency and environmental sustainability of this material. However, the antibacterial efficiency of g-C₃N₄ is affected by several factors, including its specific surface area, rapid electron/hole recombination processes and optical absorption properties. To improve the efficiency of the antibacterial properties of g-C₃N₄ and extend its range of applications, various nanocomposites have been prepared and evaluated. In this review, the advances in amplifying the photocatalytic antibacterial efficiency of g-C₃N₄-based nanocomposites is discussed, including different topologies, noble metal decoration, non-noble metal doping and heterojunction construction. The enhancement mechanisms and synergistic effects in g-C₃N₄-based nanocomposites are highlighted. The remaining challenges and future perspectives of antibacterial g-C₃N₄-based nanocomposites are also discussed.

PES-Ag3PO4/g-C3N4 Mixed Matrix Film Photocatalyst for Degradation of Methyl Orange Dye

In the present study, we explored the effectiveness of PES-Ag₃PO₄/g-C₃N₄ film photocatalyst in degrading methyl orange dye under visible light irradiation. The PES-Ag₃PO₄/g-C₃N₄ film photocatalyst was prepared via a non-solvent-induced phase inversion process and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), laser scanning microscopy (LSM), X-ray photoelectron spectra (XPS), UV-diffuse reflectance (DRS), and water contact angle. The incorporation of the Ag₃PO₄/g-C₃N₄ composite into the PES matrix improved the pristine PES film’s hydrophilicity, as evidenced by the reduction of water contact angle from 79.03° to 54.33° for a film containing 15 wt % of Ag₃PO₄/g-C₃N₄ composite. The film’s photoactivity showed that 13 wt % was the best loading of Ag₃PO₄/g-C₃N₄ composite, and the degradation performance was maintained up to three cycles. The •O₂⁻ and h⁺ were the predominant species responsible for the methyl orange degradation.

A New Method for a Polyethersulfone-Based Dopamine-Graphene (xGnP-DA/PES) Nanocomposite Membrane in Low/Ultra-Low Pressure Reverse Osmosis (L/ULPRO) Desalination

Herein we present a two-stage phase inversion method for the preparation of nanocomposite membranes for application in ultra-low-pressure reverse osmosis (ULPRO). The membranes containing DA-stabilized xGnP (xGnP-DA-) were then prepared via dry phase inversion at room temperature, varying the drying time, followed by quenching in water. The membranes were characterized for chemical changes utilizing attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). The results indicated the presence of new chemical species and thus, the inclusion of xGnP-DA in the polyethersulfone (PES) membrane matrix. Atomic force microscopy (AFM) showed increasing surface roughness (R_a) with increased drying time. Scanning electron microscopy (SEM) revealed the cross-sectional morphology of the membranes. Water uptake, porosity and pore size were observed to decrease due to this new synthetic approach. Salt rejection using simulated seawater (containing Na, K, Ca, and Mg salts) was found to be up to stable at <99.99% between 1–8 bars operating pressure. After ten fouling and cleaning cycles, flux recoveries of <99.5% were recorded, while the salt rejection was <99.95%. As such, ULPRO membranes can be successfully prepared through altered phase inversion and used for successful desalination of seawater.

Functionalized electrospun nanofiber membranes for water treatment: A review

Electrospun nanofiber membranes (ENMs) have high porosity, high specific surface area and unique interconnected structure. It has huge advantages and potential in the treatment and recycling of wastewater. In addition, ENMs can be easily functionalized by combining multifunctional materials to achieve different water treatment effects. Based on this, this review summarizes the preparation of functionalized ENMs and its detailed application in the field of water treatment. First, the process and influence factors of electrospinning process are introduced. ENMs with high porosity, thin and small fiber diameter have better performance. Secondly, the modification methods of ENMs are analyzed. Pre-electrospinning and post-electrospinning modification technology can prepare specific functionalized ENMs. Subsequently, functionalized ENMs show water treatment capabilities such as separation, adsorption, photocatalysis, and antimicrobial. Subsequently, the application of functionalized ENMs in water treatment capabilities such as separation, adsorption, photocatalysis, and antimicrobial capabilities were listed. Finally, we also made some predictions about the future development direction of ENMs in water treatment, and hope this article can provide some clues and guidance for the research of ENMs in water treatment.

Accelerated photodeterioration of class I toxic monocrotophos in the presence of one-pot constructed Ag3PO4/polyaniline@g-C3N4 nanocomposite: efficacy in light harvesting

Water and soil contamination has become unavoidable due to the enormous usage of pesticides in agriculture. Among the pesticides, monocrotophos (MCP), a popular and largely used pesticide, is extremely toxic to birds and humans, which is easily leached into the environment. Therefore, establishment of a green tactic to clean the environment from such hazard is very essential. Herein, we have developed a novel ternary nanocomposite, Ag₃PO₄/polyaniline@g-C₃N₄ with enhanced electron-hole separation efficiency, a condition which is very much required for any photocatalyst. The nanocomposite was one-pot synthesized by a simple and economical hydrothermal method. The strategically modulated band gaps of the nanocomposite help harvest the sunlight efficaciously for the robust degradation of MCP (99.6%). It has been found that the active species involved in the photo-cleaning process are OH^· and O₂^·-. A suitable reaction mechanism has been proposed and discussed. Analytical techniques, which include energy-dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FE-SEM), elemental mapping analysis, high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy (UV-DRS), and X-ray diffraction (XRD), were used to characterize the synthesized nanocomposite. This nano-photocatalyst, which is simple, stable, and reusable, certainly has potential applications in soil contamination remediation, sewage treatments, and other environment decontaminations. Also, a study of this kind offers more strategic plans for the production of clean energy (hydrogen) by solar-driven water splitting.

A review on the applications of ultrasonic technology in membrane bioreactors

Membrane bioreactors (MBRs) have received increasing attention in the field of wastewater treatment in recent years. However, membrane fouling is the main problem of MBRs, limiting their widespread and large applications. Membrane cleaning methods can be mainly classified into four types including chemical, physical, physico-chemical and biological clean the fouled membrane. In recent years, ultrasonication has been reported as a promising cleaning technique for the membranes fouled in MBRs. Ultrasonic irradiation can clean the fouled membrane by creating important physical phenomena including microjets, microstreams and shock waves. Moreover, the ultrasonic method can be combined with other cleaning methods e.g. chemical cleaning and backwashing in order to improve the cleaning efficiency. It should be noted that the application of ultrasonic in the MBR system is not limited to the cleaning of membrane. The pretreatment of the wastewater by ultrasonic irradiation or ultrasound coupled with other methods, e.g. ozonation, prior to MBR system, can decrease the organic loading of the wastewater and subsequently postpone the fouling of the membrane. This paper critically reviews the recent advances in the applications of ultrasound in MBR systems. Emerging issues associated with application of on-line ultrasound and also hybrid on-line ultrasound for controlling the membrane fouling in MBR systems are critically reviewed. Moreover, application of the ultrasound in ex-situ form for cleaning the fouled membranes and pretreatment of wastewater prior to the MBR system is discussed.

Next-Generation Multifunctional Carbon-Metal Nanohybrids for Energy and Environmental Applications

Nanotechnology has unprecedentedly revolutionized human societies over the past decades and will continue to advance our broad societal goals in the coming decades. The research, development, and particularly the application of engineered nanomaterials have shifted the focus from "less efficient" single-component nanomaterials toward "superior-performance", next-generation multifunctional nanohybrids. Carbon nanomaterials (e.g., carbon nanotubes, graphene family nanomaterials, carbon dots, and graphitic carbon nitride) and metal/metal oxide nanoparticles (e.g., Ag, Au, CdS, Cu₂O, MoS₂, TiO₂, and ZnO) combinations are the most commonly pursued nanohybrids (carbon-metal nanohybrids; CMNHs), which exhibit appealing properties and promising multifunctionalities for addressing multiple complex challenges faced by humanity at the critical energy-water-environment (EWE) nexus. In this frontier review, we first highlight the altered and newly emerging properties (e.g., electronic and optical attributes, particle size, shape, morphology, crystallinity, dimensionality, carbon/metal ratio, and hybridization mode) of CMNHs that are distinct from those of their parent component materials. We then illustrate how these important newly emerging properties and functions of CMNHs direct their performances at the EWE nexus including energy harvesting (e.g., H₂O splitting and CO₂ conversion), water treatment (e.g., contaminant removal and membrane technology), and environmental sensing and in situ nanoremediation. This review concludes with identifications of critical knowledge gaps and future research directions for maximizing the benefits of next-generation multifunctional CMNHs at the EWE nexus and beyond.