Anode biofilm maturation time, stable cell performance time, and time-course electrochemistry in a single-chamber microbial fuel cell with a brush-anode

Development of a model to describe the performance of electromethanosynthesis in two microbial electrolysis cells with different biocathode sizes

Electromethanosynthesis in a Microbial Electrolysis Cell facilitates CH4 production through enhanced reaction kinetics and efficient CO2/CH4 separation, while concurrently facilitating wastewater treatment. Two MECs which differed in the biocathode projected surface area (1.25 and 0.25 m2) were constructed and operated. The results demonstrated that increasing the electrode size led to increased CH4 production and improved MEC efficiency. A mathematical model was developed to describe the two MECs in the COMSOL Multiphysics framework, which simulates the growth of six microbial populations, using Butler-Volmer-Monod kinetics, taking into account the impact of the overpotentials. The model captured the effect of the developed overpotentials on substrate consumption and current production and the simulations showed good agreement with the measured variables in terms of reaction rates, leading to a deviation of 2.5 % for organic content removal and < 1 % for electromethanosynthesis. The validation of the model, accounting for varying biocathode sizes, accurately predicted the CH4 production under all different conditions employed and the highest deviation was 10 %. The developed model provides the foundation for understanding the dynamics of substrate availability, diffusion of species, electrochemical reactions and microbial populations, across multiple chemical pathways, while establishing the framework for predicting the significance of reactor design for efficient electromethanosynthesis.

The Role of Anode Potential in Electromicrobiology

Electroactive microorganisms are capable of exchanging electrons with electrodes and thus have potential applications in many fields, including bioenergy production, microbial electrochemical synthesis of chemicals, environmental protection, and microbial electrochemical sensors. Due to the limitations of low electron transfer efficiency and poor stability, the application of electroactive microorganisms in industry is still confronted with significant challenges. In recent years, many studies have demonstrated that modulating anode potential is one of the effective strategies to enhance electron transfer efficiency. In this review, we have summarized approximately 100 relevant studies sourced from PubMed and Web of Science over the past two decades. We present the classification of electroactive microorganisms and their electron transfer mechanisms and elucidate the impact of anode potential on the bioelectricity behavior and physiology of electroactive microorganisms. Our review provides a scientific basis for researchers, especially those who are new to this field, to choose suitable anode potential conditions for practical applications to optimize the electron transfer efficiency of electroactive microorganisms, thus contributing to the application of electroactive microorganisms in industry.

One-step annealing in situ synthesis of low tortuosity corn straw cellulose biochar/Fe3C: Application for cathode catalyst in microbial fuel cell

Synthesis of microbial fuel cell (MFC) cathode catalysts using corn straw with natural multi-channel structure is an useful measure for developing sustainable energy sources and making creative use of agricultural waste. The catalytic performance of nanomaterial catalysts in the oxygen reduction reaction (ORR) is clearly influenced by porosity and channel structure. Mesopores usually contribute to the enhancement of reaction kinetics and mass transfer. Therefore, in this paper, we have devised a method for the in situ synthesis of Fe3C/B (CIP) using cold isostatic pressure (CIP), which is inspired by the natural channel structures in plants that conduct water, salt and organic matter. The low tortuosity in materials due to this special structure can make it easier to create continuous electron channels and direct ion transfer channels. In addition, Fe3C/B (CIP) has amorphous characteristic defects (ID/IG = 0.82), high specific surface area (817.04 m2g-1), and mesoporous structure (3.240 nm). When Fe3C/B (CIP) was used as the cathode catalyst, the maximum power density of the MFC (1370.31 mW/m2) was 44.79 % higher than that of the commercial Pt/C catalyst (946.40 mW/m2). The present study offers an MFC cathode catalyst with a long cycling stability and high power density.

Microbial approach towards anode biofilm engineering enhances extracellular electron transfer for bioenergy production

Applying microbial electrolysis cells (MEC) is a biological approach to enhance the growth of high amounts of electroactive biofilm for extracellular electron transfer. The electroactive biofilm degrades the organics by oxidizing them at the anode and producing electrical energy. Addition of waste-activated sludge (WAS) with fat grease oil (FOG) produces an optimal reactor environment for microbial growth to enhance the exchange of electrons between cells via microbial electrolysis. The present work aimed to investigate the microbial approach to increase the extracellular electron transfer (EET) in microbial electrolysis cells. Results revealed that metabolites in electroactive microbes (EAM) grow viable cells that initiate high EET at anode sites. At optimum WAS with FOG addition, volatile fatty acid and current generation yield production was 2.94 ± 0.19 g/L and 17.91 ± 7.23 mA, accompanied by COD removal efficiency of 89.5 ± 14.4%, respectively. This study introduces a novel approach to anode biofilm engineering that significantly enhances extracellular electron transfer, offering a fresh perspective on bioenergy production. Our approach, which demonstrates that anodic biofilm enhances intercellular electron transfer, increases NADH-NAD ratio, and increases metabolite yield-fluxes, has the potential to revolutionize bio-electricity production. Results indicated that the electrolysis highlights MEC performance in power generation of 788 mV with 200 mL of anode volume of active viable cells by utilizing WAS with 11% FOG. The achievements of this study provide critical parameters for the anode biofilm engineering, demonstrating how growth cell volume, intercellular electron transfer, and increases in NADH-NAD ratio are evidence of an increase in the EET, compelling evidence for the resilience treatment and efficient current production. These findings are significant in advancing our understanding of bioenergy production.

Recent advances in the role of biocatalyst in biofuel cells and its application: An overview

Biofuel cells have recently gained popularity as a green and renewable energy source. Biofuel cells are unique devices of energy and are capable of converting the stored chemical energy from waste materials such as pollutants, organics and wastewater into reliable, renewable, pollution-free energy sources through the action of biocatalysts such as various microorganisms and enzymes. It is a promising technological device to treat waste to compensate for global warming and the energy crisis through the green energy production process. Due to their unique properties, various potential biocatalysts are attracting researchers to apply them to various microbial biofuel cells for improving electricity and power. Recent research in biofuel cells is focusing on the exploitation of different biocatalysts and how they are enhancing power generation for various applications in the field of environmental technology, and biomedical fields such as implantable devices, testing kits, and biosensors. This review focusing the importance of microbial fuel cells (MFCs) and enzymatic fuel cells (ECFs) and role of different types of biocatalysts and their mechanisms for improving biofuel cell efficiency gathered from recent reports. Finally, its multifaceted applications with special emphasis on environmental technology and biomedical field will be described, along with future perspectives.

External circuit loading mode regulates anode biofilm electrochemistry and pollutants removal in microbial fuel cells

This study investigated the effects of different external circuit loading mode on pollutants removal and power generation in microbial fuel cells (MFC). The results indicated that MFC exhibited distinct characteristics of higher maximum power density (Pmax) (named MFC-HP) and lower Pmax (named MFC-LP). And the capacitive properties of bioanodes may affect anodic electrochemistry. Reducing external load to align with the internal resistance increased Pmax of MFC-LP by 54.47 %, without no obvious effect on MFC-HP. However, intermittent external resistance loading (IER) mitigated the biotoxic effects of sulfamethoxazole (SMX) (a persistent organic pollutant) on chemical oxygen demand (COD) and NH4+-N removal and maintained high Pmax (424.33 mW/m2) in MFC-HP. Meanwhile, IER mode enriched electrochemically active bacteria (EAB) and environmental adaptive bacteria Advenella, which may reduce antibiotic resistance genes (ARGs) accumulation. This study suggested that the external circuit control can be effective means to regulate electrochemical characteristics and pollutants removal performance of MFC.

The impact of bottom water light exposure on electrical and sediment remediation performance of sediment microbial fuel cells

Sediment microbial fuel cells (SMFCs) generate bioelectricity from benthic sediments and thus providing both bioelectricity generation and sediment remediation. However, the high internal resistance of the cathode leads to a low power output, which requires research on cathode treatment. In this study, we explored the influence of light irradiation on bioelectricity production and nutrient removal in the SMFC system. The microcosm experiment of the SMFC system was designed with artificial illumination of 500 lux (light-SMFC) and compared with dark conditions of 15 lux (dark-SMFC), which showed that the current increases during photoperiods. The study reveals that light-illuminated SMFC consistently produced the highest voltage, with the highest voltage (553 mV) being 1.3 times higher than the dark-SMFC (440 mV). The polarization curves show a significant reduction in internal cathodic resistance under light condition, resulting in increased voltage generation. The light-SMFC exhibits the highest maximum power density of 35.93 mW/m2, surpassing the dark SMFC of 31.13 mW/m2. It was found that light illumination in the SMFC system increases oxygen availability in the cathodic region, which supports the oxygen reduction reaction (ORR) process. At the same time, the high bioelectricity output contributes to the highest sediment remediation by greatly reducing the chemical oxygen demand (COD) and phosphate (PO4-P) concentrations. The study highlights the potential of light illumination in mitigating cathodic limitation to improve SMFC performance and nutrient removal.

PDA-Fe3O4 decorated carbon felt anode enhancing electrochemical performance of microbial fuel cells: Effect of electrode materials on electroactive biofilm

Anode modification is an effective strategy for enhancing the electrochemical performance of microbial fuel cell (MFC). However, the impacts of the modified materials on anode biofilm development during MFC operation have been less studied. We prepared a novel PDA-Fe3O4-CF composite anode by coating original carbon felt anode (CF) with polydopamine (PDA) and Fe3O4 nanoparticles. The composite anode material was characterized by excellent hydrophilicity and electrical conductivity, and the anodic biofilm exhibited fast start-up, higher biomass, and more uniform biofilm layer after MFC operation. The MFC reactor assembled with the composite anode achieved a maximum power density of 608 mW m-2 and an output voltage of 586 mV, which were 316.4% and 72.4% higher than the MFC with the original CF anode, respectively. Microbial community analysis indicated that the modified anode biofilm had a higher relative abundance of exoelectrogen species in comparison to the unmodified anode. The PICRUSt data revealed that the anodic materials may affect the bioelectrochemical performance of the biofilm by influencing the expression levels of key enzyme genes involved in biofilm extracellular polymer (EPS) secretion and extracellular electron transfer (EET). The growth of the anodic biofilm would exert positive or negative influences on the efficiency of electricity production and electron transfer of the MFCs at different operating stages. This work expands the knowledge of the role that anodic materials play in the development and electrochemical performance of anodic biofilm in MFCs.

Development, performance evaluation, and kinetic studies of microbial fuel cell based auto dripping bioelectrochemical reactor (AutoDriBER) for urine treatment

A bioelectrochemical reactor is an assembly, which facilitates energy generation and resource recovery using electrochemically active microorganisms. To maximise energy production from wastewater in this bioreactor system special design is required. Therefore, in the present study, continuous flow auto dripping bioelectrochemical reactors (AutoDriBERs) were developed as a single and multi-electrode assembly for urine treatment. Further, their performance was assessed by connecting reactors in series and parallel arrangements. AutoDriBER configured in series connection showed the highest 93.64 ± 1.57% chemical oxygen demand removal rate with the 1.38 ± 0.64 V voltage and 2.54 W m-3 polarisation power density. The optimum flow rate for maximum voltage production was tested with various models i.e. the linear, exponential, Sweibull-1, and Sweibull-2 models to confirm voltage prediction and its validity. The Linear and exponential models were found best fitted for voltage production with R2 value of 0.999. These findings infer a novel approach toward optimisation of the complex, inexpensive and self-sufficient design for electricity generation from energy-rich urine wastewater in rural areas.

Improving oxygen reduction reaction by cobalt iron-layered double hydroxide layer on nickel-metal organic framework as cathode catalyst in microbial fuel cell

Cobalt Iron -layered double hydroxide (CoFe-LDH) nano sheets were attached to Nickel-metal organic frameworks (Ni-MOF) by utilizing hydrothermal reaction method, and CoFe-LDH@Ni-MOF was synthesized and worked as the cathode catalyst in microbial fuel cell. The surface of this composite material provided generous electrochemical active sites, consisting of wrinkled strips of CoFe-LDH adhering to a lamellar structure of Ni-MOF. In terms of the maximum output power density, CoFe-LDH@Ni-MOF as the catalyst was 211 mW/m2, 2.54 times higher than that of Ni-MOF (83 mW/m2), and it was stable at about 225 mV for 150 h. CoFe-LDH@Ni-MOF showed high oxygen reduction reaction capability and high specific surface area, and the electron transfer rate was accelerated. This work might set the stage for the development and utilization of fuel cell cathode catalysts.

Simultaneous naphthalene degradation and electricity production in a biowaste-powered microbial fuel cell

Naphthalene is a very common and hazardous environmental pollutant, and its biodegradation has received serious attention. As demonstrated in this study, naphthalene-contaminated wastewater can be biodegraded using a microbial fuel cell (MFC). Furthermore, the potential of MFC for electricity generation appears to be a promising technology to meet energy demands other than those produced from fossil fuels. Nowadays, efforts are being made to improve the overall performance of MFC by integrating biowaste materials for anode fabrication. In this study, palm kernel shell waste was used to produce palm kernel shell-derived graphene oxide (PKS-GO) and palm kernel shell-derived reduced graphene oxide (PKS-rGO), which were then fabricated into anode electrodes to improve the system's electron mobilization and transport. The MFC configuration with the PKS-rGO anode demonstrated greater energy production potential, with a maximum power density of 35.11 mW/m2 and a current density of 101.76 mA/m2, compared to the PKS-GO anode, which achieved a maximum power density of 17.85 mW/m2 and a current density of 72.56 mA/m2. Furthermore, there is simultaneous naphthalene biodegradation with energy production, where the biodegradation efficiency of naphthalene with PKS-rGO and PKS-GO is 85.5%, and 79.7%, respectively. In addition, the specific capacitance determined from the cyclic voltammetry curve revealed a value for PKS-rGO of 2.23 × 10-4 F/g, which is also higher than the value for PKS-GO (1.57 × 10-4 F/g) on the last day of operation. Anodic microbial analysis shows that electrogens thrive in the MFC process. Finally, a comparison with previous literature and the future prospects of the study are also presented.

Influence of carbon-based cathodes on biofilm composition and electrochemical performance in soil microbial fuel cells

Increasing energy demands and environmental pollution concerns press for sustainable and environmentally friendly technologies. Soil microbial fuel cell (SMFC) technology has great potential for carbon-neutral bioenergy generation and self-powered electrochemical bioremediation. In this study, an in-depth assessment on the effect of several carbon-based cathode materials on the electrochemical performance of SMFCs is provided for the first time. An innovative carbon nanofibers electrode doped with Fe (CNFFe) is used as cathode material in membrane-less SMFCs, and the performance of the resulting device is compared with SMFCs implementing either Pt-doped carbon cloth (PtC), carbon cloth, or graphite felt (GF) as the cathode. Electrochemical analyses are integrated with microbial analyses to assess the impact on both electrogenesis and microbial composition of the anodic and cathodic biofilm. The results show that CNFFe and PtC generate very stable performances, with a peak power density (with respect to the cathode geometric area) of 25.5 and 30.4 mW m^-2, respectively. The best electrochemical performance was obtained with GF, with a peak power density of 87.3 mW m^-2. Taxonomic profiling of the microbial communities revealed differences between anodic and cathodic communities. The anodes were predominantly enriched with Geobacter and Pseudomonas species, while cathodic communities were dominated by hydrogen-producing and hydrogenotrophic bacteria, indicating H₂ cycling as a possible electron transfer mechanism. The presence of nitrate-reducing bacteria, combined with the results of cyclic voltammograms, suggests microbial nitrate reduction occurred on GF cathodes. The results of this study can contribute to the development of effective SMFC design strategies for field implementation.

Structure evolution of air cathodes and their application in electrochemical sensor development and wastewater treatment

Cathode structure and material are the most important factors to determine the performance and cost of single chamber air-cathode microbial fuel cell (MFC), which is the most promising type of MFC technology. Since the first air cathode was invented in 2004, five major structures (1-layer, 2-layer, 3-layer, 4-layer and separator-support) have been invented and modified to fit new material, improve power performance and lower MFC cost. This paper reviewed the structure evolution of air cathodes in past 18 years. The benefits and drawbacks of these structures, in terms of power generation, material cost, fabrication procedure and modification process are analyzed. The practical application cases (e.g., sensor development and wastewater treatment) employed with different cathode structures were also summarized and analyzed. Based on practical performance and long-term cost analysis, the 2-layer cathode demonstrated much greater potential over other structures. Compared with traditional activated-sludge technology, the cost of an MFC-based system is becoming competitive when employing with 2-layer structure. This review not only provides a detailed development history of air cathode but also reveals the advantages/disadvantages of air cathode with different structures, which will promote the research and application of air-cathode MFC technology.

Enhancing extracellular electron transfer through selective enrichment of Geobacter with Fe@CN-modified carbon-based anode in microbial fuel cells

Microbial fuel cells (MFCs) have been demonstrated as a renewable energy strategy to efficiently recover chemical energy stored in wastewater into clean electricity, yet the limited power density limits their practical application. Here, Fe-doped carbon and nitrogen (Fe@CN) nanoparticles were synthesized by a direct pyrolysis process, which was further decorated to fabricate Fe@CN carbon paper anode. The modified Fe@CN anode with a higher electrochemically active surface area was not only benefit for the adhesion of electrochemically active microorganisms (EAMs) and extracellular electron transfer (EET) between the anode and EAMs but also selectively enriched Geobacter, a typical EAMs species. Accordingly, the MFCs with Fe@CN anode successfully achieved a highest voltage output of 792.76 mV and a prolonged stable voltage output of 300 h based on the mixed culture feeding with acetate. Most importantly, the electroactive biofilms on Fe@CN anode achieved more content ratio of proteins to polysaccharides (1.40) in extracellular polymeric substances for the balance between EET and cell protection under a harsh environment. This work demonstrated the feasibility of development on anode catalysts for the elaboration of the catalytic principle about interface modification, which may contribute to the practical application of MFC in energy generation and wastewater treatment.

In situ degradation of organic pollutants by novel solar cell equipped soil microbial fuel cell

The soil microbial fuel cell (SMFC) has been widely used for soil remediation for its low cost and being eco-friendly. But low degradation efficiency and high mass transfer resistance limit its performance. This study constructed a solar cell-soil microbial fuel cell (SC-SMFC) with different voltages, which use clean energy to improve system performance. At different voltages, 2.0-V system showed the best performance and the maximum output power increased by 330% compared with SMFC. Moreover, 2.0-V SC-SMFC showed the fastest phenol degradation rate of 14 μg·mL^-1·d^-1 at the concentration of 80 μg/mL, which was twice of SMFC. Further increasing the concentration to 320 μg/mL, the system showed extremely high concentration limit and degraded 90% within 19 days. Under this condition, SC-SMFC still showed excellent cycle stability, with the third-round degrading 90% phenol in 13 days. Finally, electrochemical impedance spectroscopy (EIS) mechanism study showed that solar cells can accelerate microbial metabolic process and reduce the internal resistance, in which the 2.0-V system was only 87% of SMFC. In conclusion, SC-SMFC provides a green, low-cost, and convenient method for in situ soil remediation in the future.

Experimental investigation for treating ibuprofen and triclosan by biosurfactant from domestic wastewater

The presence of emerging pollutants of pharmaceutical products and personal care products (PPCPs) in the aquatic environment overspreads the threat on living beings. Bioremediation is a promising option for treating wastewater. In the present study, an experimental investigation was carried out to produce a biosurfactant by Pseudomonas aeruginosa (MTCC 1688) for the removal of Ibuprofen (IBU) and Triclosan (TCS) from domestic wastewater. It was performed in three stages. Firstly, the production and optimization of biosurfactant was carried out to arrive at the best combination of crude sunflower oil, sucrose and ammonium bicarbonate (10%: 5.5 g/L: 1 g/L) to yield effective biosurfactant production (crude biosurfactant) and further extended to achieve critical micelle concentration (CMC) formation by dilution (biosurfactant at 10.5%). The stability of the biosurfactant was also confirmed. Biosurfactant showed a reduction in the surface tension to 41 mN/m with a yield concentration of 11.2 g/L. Secondly, its effectiveness was evaluated for the removal of IBU and TCS from the domestic wastewater collected during the dry and rainy seasons. Complete removal of IBU was achieved at 36 h & 6 h and TCS at 6 h & 1 h by crude biosurfactant and biosurfactant at CMC formation for the dry season sample. IBU removal was achieved in 2 h by both crude and biosurfactant at CMC and no TCS was detected in the rainy season sample. Thirdly, biotransformation intermediates of IBU and TCS formed during the application of the biosurfactant and degradation pathways are proposed based on the Liquid Chromatography-Mass Spectrometry (LC-MS) and it indicates that there is no formation of toxic by-products. Based on the results, it is evident that biosurfactant at CMC has performed better for the removal of IBU and TCS than crude biosurfactants without any formation of toxic intermediates. Hence, this study proved to be an eco-friendly, cost-effective and sustainable treatment option for domestic wastewater treatment.

Rice husk-derived silicon nanostructured anode to enhance power generation in microbial fuel cell treating distillery wastewater

The present study aims to utilize rice husk as a source of silica to prepare rice husk derived silicon nanoparticles (RH-Si) and demonstrate its ability as an anode modifier in a two-chambered H-shaped microbial fuel cell (MFC). The silicon nanoparticles synthesized by magnesiothermal reduction process were spherical in shape and ranged in size from 15 to 60 nm. The anode modified with silicon nanoparticles of 0.50 mg cm^-2 recorded the maximum power and current density of 190.5 mW m^-2 and 1.5 A m^-2 corresponding to 7.6-fold and 3-fold increase as compared to the control . The modified anode also recorded a COD removal and coulombic efficiency of 74% and 49%, respectively in MFC operated with combined distillery and domestic wastewater at a HRT and OLR of 72 h and 59.2 gCOD L^-1 d^-1, respectively. The results evidence that RH derived silicon NPs are good anode modifiers and effective in enhancing bioelectricity generation and COD removal in MFCs.

Bioelectrochemical systems for enhanced nitrogen removal with minimal greenhouse gas emission from carbon-deficient wastewater: A review

Nitrogen pollution and the rising amount of wastewater generation are calling for advanced wastewater treatments, which is particularly necessary for carbon-deficient wastewater that contains multi-species inorganic nitrogen, since conventional heterotrophic denitrification processes cannot remove nitrogen completely when carbon sources are insufficient. For that, bioelectrochemical systems (BES) have been recently developed because they can simultaneously produce electricity and remove resistant nitrogen from the carbon-deficient wastewater. However, the simultaneous removal of multi-species inorganic nitrogen cannot be achieved by electroautotrophic denitrification using BES alone. Moreover, the efficiency of nitrogen removal and power generation has been thwarted by the low energy output, high internal resistance of the device, and electron competition in non-denitrification pathways. This review article discusses the latest developments for nitrogen removal through BES-enhanced denitrification and elucidates multiple coupled BES-based denitrification pathways to remove multi-species inorganic nitrogen simultaneously. Focus points of the research area include coupling BES technologies with emerged methods, electron transfer enhancement, and avoiding electron competition that improves performance with less cost. The prospect of reducing emissions of greenhouse gases is also critically reviewed, in the hope of reducing potential intermediate products of denitrification, such as nitrous oxide (a potent greenhouse gas), through multi-factor regulation. We imply that BES is a good choice for future scale-up applications of MFC coupled with MEC to treat carbon-deficient wastewater. Overall, this review will provide useful information for the development of advanced technologies to treat carbon-deficient wastewater with less emission of greenhouse gases.

A three-dimensional phenolic-based carbon anode for microbial electrochemical system with customized macroscopic pore structure to promote interior bacteria colonization

Microbial electrochemical system (MES) is an emerging wastewater treatment technology that compensates the energy demands of containments removal by in situ converting the chemical energy of organic pollutants. As the structure for exoelectrogens and the reaction site of extracellular electron transfer (EET), the anode is essential for MES. The future commercial application of MES requires efficiency and large-scale fabrication available anode. In this study, a 3D anode with millimeter-scale pores (3D-MPA) was successfully constructed by sacrificial template method, with low-cost phenolic resin as carbon precursor and polymethyl methacrylate (PMMA) pellets as template. With customized and ordered pore of 1 mm, the 3D-MPAs allowed the microorganisms to colonize inside, improving anodic space utilization efficiency. Different carbonization temperature in tested range from 700 °C to 1000 °C regulated the micrometer-scale convex structures and surface roughness of 3D-MPAs, causing electrochemical performance changes. The 3D-MPA-900 obtained the largest electroactive surface area (102 ± 4.1 cm²) and smallest ohmic resistance (1.8 ± 0.09 Ω). Equipped with MES, 3D-MPA-900 reached the highest power density and current density (2590 ± 25 mW m^-2 and 5.20 ± 0.07 A m^-2). Among tested 3D-MPA, the excellent performance of 3D-MPA-900 might be attributed by its convex structures with suitable size and surface coverage. The surface roughness of 3D-MPA-900 enhanced the microorganism adherence, which then promoted EET on anode surface. Generally, phenolic-based 3D-MPA made of sacrificial-template method had controllable porous structure, large-scale fabrication availability, high chemical stability and excellent mechanical property, which could be promising for the commercial application of MES.

Enhanced power generation, organics removal and water desalination in a microbial desalination cell (MDC) with flow electrodes

This study introduced a flow electrode microbial desalination cell (FE-MDC), which used activated carbon (AC) particles and carbon nanotubes (CNTs) as the electrode to promote electron harvesting. The recovered electricity energy (0.371 KWh/m³) and columbic efficiency (66.7 %) of the FE-MDC were over 2 times higher than those of the conventional MDC without the flow electrode. Consequently, the salt and COD removal efficiencies were enhanced to 77.8 % and 91.2 %, respectively. Electrochemical analysis implied that the charge transfer resistance of the system was reduced by the flow electrode. Electron accumulation and charging-discharging experiments proved that the flow electrode could accumulate electrons and transfer the electrons to the fixed anode. Bacterial community analysis indicated that the bacterial activity was improved by the flow electrode. The content of the exoelectrogen Pseudomonas increased from 5.0 % to 14.7 %, and Hydrogenophaga improved from 1.4 % to 5.9 %. Finally, a continuous operation mode of the FE-MDC was established, and the flow electrode slurry was returned to the anodic chamber for recirculated utilization. The voltage output, COD removal, and salt removal during the operation mode reached 610 mV, 78.8 %, and 76.1 %, respectively. This study proved that the flow electrode is a promising way to promote the practical application of MDC technology.

Microbial community niches on microplastics and prioritized environmental factors under various urban riverine conditions

Microplastics (MPs) provide habitats to microorganisms in aquatic environments; distinct microbial niches have recently been elucidated. However, there is little known about the microbial communities on MPs under urban riverine conditions, in which environmental factors fluctuate. Therefore, this study investigated MP biofilm communities under various urban riverine conditions (i.e., organic content, salinity, and dissolved oxygen (DO) concentration) and evaluated the prioritized factors affecting plastisphere communities. Nine biofilm-forming reactors were operated under various environmental conditions. Under all testing conditions, biofilms grew on MPs with decreasing bacterial diversity. Interestingly, biofilm morphology and bacterial populations were driven by the environmental parameters. We found that plastisphere community structures were grouped according to the environmental conditions; organic content in the water was the most significant factor determining MP biofilm communities, followed by salinity and DO concentration. The principal plastisphere communities were Proteobacteria, Bacteroidetes, Cyanobacteria, and Firmicutes phyla. In-depth analyses of plastisphere communities revealed that biofilm-forming and plastic-degrading bacteria were the predominant microbes. In addition, potential pathogens were majorly discovered in the riverine waters with high organic content. Our results suggest that distinct plastisphere communities coexist with MP particles under certain riverine water conditions, implying that the varied MP biofilm communities may affect urban riverine ecology in a variety of ways.

Microbial electrosynthesis from carbon dioxide feedstock linked to yeast growth for the production of high-value isoprenoids

The difficulty in producing multi-carbon and thus high-value chemicals from CO₂ is one of the key challenges of microbial electrosynthesis (MES) and other CO₂ utilization technologies. Here, we demonstrate a two-stage bioproduction approach to produce terpenoids (>C₂₀) and yeast biomass from CO₂ by linking MES and yeast cultivation approaches. In the first stage, CO₂ (C₁) is converted to acetate (C₂) using Clostridium ljungdahlii via MES. The acetate is then directly used as the feedstock to produce sclareol (C₂₀), β-carotene (C₄₀), and yeast biomass using Saccharomyces cerevisiae in the second stage. With the unpurified acetate-containing (1.5 g/L) spent medium from MES reactors, S. cerevisiae produced 0.32 ± 0.04 mg/L β-carotene, 2.54 ± 0.91 mg/L sclareol, and 369.66 ± 41.67 mg/L biomass. The primary economic analysis suggests that sclareol and biomass production is feasible using recombinant S. cerevisiae and non-recombinant S. cerevisiae, respectively, directly from unpurified acetate-containing spent medium of MES.

Polyaniline-Derived Nitrogen-Containing Carbon Nanostructures with Different Morphologies as Anode Modifier in Microbial Fuel Cells

Anode modification with carbon nanomaterials is an important strategy for the improvement of microbial fuel cell (MFC) performance. The presence of nitrogen in the carbon network, introduced as active nitrogen functional groups, is considered beneficial for anode modification. In this aim, nitrogen-containing carbon nanostructures (NCNs) with different morphologies were obtained via carbonization of polyaniline and were further investigated as anode modifiers in MFCs. The present study investigates the influence of NCN morphology on the changes in the anodic microbial community and MFC performance. Results show that the nanofibrillar morphology of NCNs is beneficial for the improvement of MFC performance, with a maximum power density of 40.4 mW/m2, 1.25 times higher than the anode modified with carbonized polyaniline with granular morphology and 2.15 times higher than MFC using the carbon cloth-anode. The nanofibrillar morphology, due to the well-defined individual nanofibers separated by microgaps and micropores and a better organization of the carbon network, leads to a larger specific surface area and higher conductivity, which can allow more efficient substrate transport and better bacterial colonization with greater relative abundances of Geobacter and Thermoanaerobacter, justifying the improvement of MFC performance.

Microbial community regulation and performance enhancement in gas biofilters by interrupting bacterial communication

BACKGROUND

Controlling excess biomass accumulation and clogging is important for maintaining the performance of gas biofilters and reducing energy consumption. Interruption of bacterial communication (quorum quenching) can modulate gene expression and alter biofilm properties. However, whether the problem of excess biomass accumulation in gas biofilters can be addressed by interrupting bacterial communication remains unknown.

RESULTS

In this study, parallel laboratory-scale gas biofilters were operated with Rhodococcus sp. BH4 (QQBF) and without Rhodococcus sp. BH4 (BF) to explore the effects of quorum quenching (QQ) bacteria on biomass accumulation and clogging. QQBF showed lower biomass accumulation (109 kg/m³) and superior operational stability (85-96%) than BF (170 kg/m³; 63-92%) at the end of the operation. Compared to BF, the QQBF biofilm had lower adhesion strength and decreased extracellular polymeric substance production, leading to easier detachment of biomass from filler surface into the leachate. Meanwhile, the relative abundance of quorum sensing (QS)-related species was found to decrease from 67 (BF) to 56% (QQBF). The QS function genes were also found a lower relative abundance in QQBF, compared with BF. Moreover, although both biofilters presented aromatic compounds removal performance, the keystone species in QQBF played an important role in maintaining biofilm stability, while the keystone species in BF exhibited great potential for biofilm formation. Finally, the possible influencing mechanism of Rhodococcus sp. BH4 on biofilm adhesion was demonstrated. Overall, the results of this study achieved excess biomass control while maintaining stable biofiltration performance (without interrupting operation) and greatly promoted the use of QQ technology in bioreactors. Video Abstract.

Developing an Efficient Processing System Treatment for the High Concentration of Eucalyptus Chemical Mechanical Pulp Wastewater

The current wastewater treatment method shows low efficiency in treating wastewater with high concentrations of chemical mechanical pulp (CMP). Therefore, a chlorine dioxide Pretreatment Anaerobic Treatment (DPAT) was developed and applied to treat the CMP wastewater to obtain higher efficiency, obtaining the following results: The biodegradability of CMP wastewater improved after chlorine dioxide pretreatment. The COD of wastewater treated with chlorine dioxide was reduced from 5634 mg/L to 660 mg/L. The removal rate for chemical oxygen demand (COD) was 88.29%, 29.13% higher than the common anaerobic treatment. The reasons for the high efficiency of the DPAT treatment were that chlorine dioxide pretreatment removed the toxic substances in the original wastewater and thereby promoted the proliferation and growth of the anaerobe. The results show that pretreatment with chlorine dioxide can effectively enhance the biodegradability of high-concentration CMP wastewater. Therefore, DPAT treatment of high-concentration CMP wastewater is beneficial to environmental protection.

Zirconia- and ceria-based electrolytes for fuel cell applications: critical advancements toward sustainable and clean energy production

Solid oxide fuel cells (SOFCs) are emerging as energy conversion devices for large-scale electrical power generation because of their high energy conversion efficiency, excellent ability to minimize air pollution, and high fuel flexibility. In this context, this critical review has focussed on the recent advancements in developing a suitable electrolyte for SOFCs which has been required for the commercialization of SOFC technology after emphasizing the literature from the prior studies. In particular, the significant developments in the field of solid oxide electrolytes for SOFCs, particularly zirconia- and ceria-based electrolytes, have been highlighted as important advancements toward the production of sustainable and clean energy. It has been reported that among various electrolyte materials, zirconia-based electrolytes have the potential to be utilized as the electrolyte in SOFC because of their high thermal stability, non-reducing nature, and high mechanical strength, along with acceptable oxygen ion conductivity. However, some studies have proved that the zirconia-based electrolytes are not suitable for low and intermediate-temperature working conditions because of their poor ionic conductivity to below 850 °C. On the other hand, ceria-based electrolytes are being investigated at a rapid pace as electrolytes for intermediate and low-temperature SOFCs due to their higher oxygen ion conductivity with good electrode compatibility, especially at lower temperatures than stabilized zirconia. In addition, the most emerging advancements in electrolyte materials have demonstrated that the intermediate temperature SOFCs as next-generation energy conversion technology have great potential for innumerable prospective applications.

Effect of the Anode Structure on the Performance of Oily Sludge Sediment Microbial Fuel Cells

The anode is considered to be a key factor to improve the single-chamber bioelectrochemical system's efficiency to degrade oily sludge in sediment while generating electricity. There are few studies on the effect of the anode structure on the performance of oily sludge MFCs systematically. In this paper, an oily sludge bioelectrical system was constructed using carbon felt and carbon plate as anode materials, adjusting the anode material arrangement as transverse and longitudinal, and using different anode materials from single to sextuple anodes. The results of this study showed that the rate of degradation of oily sludge was greater with carbon felt (17.04%) than with the carbon plate (13.11%), with transverse (23.61%) than with the longitudinal (19.82%) arrangement of anodes, and with sextuple anodes (33.72%) than with a single anode (25.26%) in the sediment microbial fuel cells (SMFCs). A similar trend was observed when the voltage, power density, and electromotive force (EMF) of SMFCs were estimated between the carbon felt and carbon plate, transverse and longitudinal arrangements, single and sextuple anodes. It is concluded that the proper adjustment of anode arrangements, using carbon felt as an anode material, and increasing the number of anodes to six may accelerate the rate of degradation of oily sludge in oily sludge sediment microbial fuel cells (SMFCs). Furthermore, the electricity generation performance was also improved.

Increase in Electrical Parameters Using Sucrose in Tomato Waste

The use of organic waste as fuel for energy generation will reduce the great environmental problems currently caused by the consumption of fossil sources, giving agribusiness companies a profitable way to use their waste. In this research, tomato waste with different percentages of sucrose (0-target, 5, 10, and 20%) was used in microbial fuel cells manufactured on a laboratory scale with zinc and copper electrodes, managing to generate maximum peaks of voltage and a current of 1.08 V and 6.67 mA in the cell with 20% sucrose, in which it was observed that the optimum operating pH was 5.29, while the MFC with 0% (target) sucrose generated 0.91 V and 3.12 A on day 13 with a similar pH, even though all the cells worked in an acidic pH. Likewise, the cell with 20% sucrose had the lowest internal resistance (0.148541 ± 0.012361 KΩ) and the highest power density (224.77 mW/cm2) at a current density of 4.43 mA/cm2, while the MFC with 0% sucrose generated 160.52 mW/cm2 and 4.38 mA/cm2 of power density and current density, respectively, with an internal resistance of 0.34116 ± 0.2914 KΩ. In this sense, the FTIR (Fourier-transform infrared spectroscopy) of all the substrates used showed a high content of phenolic compounds and carboxylate acids. Finally, the MFCs were connected in a series and managed to generate a voltage of 3.43 V, enough to light an LED (green). These results give great hope to companies and society that, in the near future, this technology can be taken to a larger scale.

A Scoping Review on Environmental, Economic, and Social Impacts of the Gasification Processes

In recent years, computer-based simulations have been used to enhance production processes, and sustainable industrial strategies are increasingly being considered in the manufacturing industry. In order to evaluate the performance of a gasification process, the Life Cycle Thinking (LCT) technique gathers relevant impact assessment tools to offer quantitative indications across different domains. Following the PRISMA guidelines, the present paper undertakes a scoping review of gasification processes’ environmental, economic, and social impacts to reveal how LCT approaches coping with sustainability. This report categorizes the examined studies on the gasification process (from 2017 to 2022) through the lens of LCT, discussing the challenges and opportunities. These studies have investigated a variety of biomass feedstock, assessment strategies and tools, geographical span, bioproducts, and databases. The results show that among LCT approaches, by far, the highest interest belonged to life cycle assessment (LCA), followed by life cycle cost (LCC). Only a few studies have addressed exergetic life cycle assessment (ELCA), life cycle energy assessment (LCEA), social impact assessment (SIA), consequential life cycle assessment (CLCA), and water footprint (WLCA). SimaPro® (PRé Consultants, Netherlands), GaBi® (sphere, USA), and OpenLCA (GreenDelta, Germany) demonstrated the greatest contribution. Uncertainty analysis (Monte Carlo approach and sensitivity analysis) was conducted in almost half of the investigations. Most importantly, the results confirm that it is challenging or impossible to compare the environmental impacts of the gasification process with other alternatives since the results may differ based on the methodology, criteria, or presumptions. While gasification performed well in mitigating negative environmental consequences, it is not always the greatest solution compared to other technologies.

Comparison between the Biofilm Desorption Abilities of T4 and MS2 Coliphages

Biofilms are a collection of microorganisms that adhere to a surface where they continue to grow. Firmly established biofilms can be hazardous to human health. Chemical and biological as well as combination methods are being tested to control biofilms. The elucidation of the biofilm disruption capabilities of individual bacteriophages has received limited attention. Although the treatment of biofilms with a combination of bacteriophages is effective, the extent to which DNA and RNA coliphages individually desorb biofilms is not well understood. Here, we show that both T4 and MS2 coliphages desorbed natural biofilms. Individual incubations of the equivalent viral load of T4 and MS2 coliphages with natural biofilms resulted in similar desorption of these biofilms. We also note that the nutrient deprivation significantly reduced biofilm growth. However, the biofilm desorption upon nutrient deprivation was similar to that observed with both T4 and MS2 phages.