Green synthesis of NiO nanoparticles using Moringa oleifera extract and their biomedical applications: Cytotoxicity effect of nanoparticles against HT-29 cancer cells

Fabrication of Nickel/Zinc Oxide Nanocomposites from Citrus sinensis Extract Prompts Apoptosis Through Impeding JAK/STAT3 Signaling in Gastric Cancer

In this study, we sought to fabricate nickel/zinc oxide nanocomposites utilizing Citrus sinensis (C. sinensis) peel extract (CS-Ni/ZnO NCs) and investigate their ability to impede the JAK/STAT3 signaling pathway in gastric cancer AGS cells. Different methods, including UV-Vis spectral analysis, FT-IR, XRD, FE-SEM, EDAX, DLS, and zeta potential, were used to characterize the fabricated CS-Ni/ZnO NCs. By measuring ROS, MMP, and apoptotic cell death using the appropriate fluorescence describing procedures, the anticancer potential of CS-Ni/ZnO NCs was examined against AGS cells. The synthesized CS-Ni/ZnO NCs displayed a rod structure with a diameter of 74.76 nm. The cytotoxicity assay showed that the CS-Ni/ZnO NCs diminished the viability of the AGS cells in a dosage-dependent manner. Results from the fluorescence probe assay showed that the CS-Ni/ZnO NCs caused apoptosis in AGS cells. JAK/STAT-3 over expressions thought to expand the transcriptional regulation of proliferation and anti-apoptosis. Hence, inhibition of JAK/STAT-3 expression is considered a crucial target for impeding the expansion of gastric cancer proliferation. The JAK/STAT3 signaling cascade was successfully blocked by CS-Ni/ZnO NCs treatment, which also started the apoptotic pathway in the AGS cells. The findings conclude that CS-Ni/ZnO NCs might serve as a promising chemo-preventive agent for treating GC.

Green synthesis of NiO NPs for metagenome-derived laccase stabilization: Detoxifying pollutants and wastes

Laccases play a crucial role in neutralizing environmental pollutants, including antibiotics and phenolic compounds, by converting them into less harmful substances via a unique oxidation process. This study introduces an environmentally sustainable remediation technique, utilizing NiO nanoparticles (NPs) synthesized through green chemistry to immobilize a metagenome-derived laccase, PersiLac1, enhancing its application in pollutant detoxification. Salvadora persica leaf extract was used for the synthesis of NiO nanoparticles, utilizing its phytochemical constituents as reducing and capping agents, followed by characterization through different analyses. Characterization of NiO nanoparticles revealed distinctive FTIR absorption peaks indicating the nanoparticulate structure, while FESEM showed structured NiO with robust interconnections and dimensionality of about 50nm, confirmed by EDX analysis to have a consistent distribution of Ni and O. The immobilized PersiLac1 demonstrated enhanced thermal stability, with 85.55 % activity at 80 °C and reduced enzyme leaching, retaining 67.93 % activity across 15 biocatalytic cycles. It efficiently reduced rice straw (RS) phenol by 67.97 % within 210 min and degraded 70-78 % of tetracycline (TC) across a wide pH range (4.0-8.0), showing superior performance over the free enzyme. Immobilized laccase achieved up to 71 % TC removal at 40-80 °C, significantly outperforming the free enzyme. Notably, 54 % efficiency was achieved at 500 mg/L TC by immobilized laccase at 120 min. This research showed the potential of green-synthesized NiO nanoparticles to effectively immobilize laccase, presenting an eco-friendly approach to purify pollutants such as phenols and antibiotics. The durability and reusability of the immobilized enzyme, coupled with its ability to reduce pollutants, indicates a viable method for cleaning the environment. Nonetheless, the production costs and scalability of NiO nanoparticles for widespread industrial applications pose significant challenges. Future studies should focus on implementation at an industrial level and examine a wider range of pollutants to fully leverage the environmental clean-up capabilities of this innovative technology.

Unexpected Electronic Features of NiO Quantum Dots Produced by Femtosecond Pulsed Laser Ablation in Water

This study examines the effect of quantum confinement and surface orientations on the electronic properties of NiO quantum dots. It compares NiO nanocrystals produced via atmospheric-pressure microplasma and femtosecond laser (fs-laser) ablation in water, finding that both methods yield quantum-confined nanocrystals with a defined face-centered cubic lattice. Notably, fs-laser synthesis generates crystalline nanocrystals from both crystalline and amorphous targets. While the electronic properties, i.e., energy of the highest occupied molecular orbital and lowest unoccupied molecular orbital (LUMO), of microplasma-synthesized NiO nanocrystals are consistent with the literature, the electronic characteristics of NiO nanocrystals produced by a fs-laser, particularly the high-lying LUMO level, are unusual for NiO quantum dots. Supported by density functional theory calculations, we show that the observed level positions are related to the different polar and nonpolar faces of the nanocrystal surface.

Green synthesis of nanomaterials by using plant extracts as reducing and capping agents

An alternative method to conventional synthesis is examined in this review by the use of plant extracts as reducing and capping agents. The use of plant extracts represents an economically viable and environmentally friendly alternative to conventional synthesis. In contrast to previous reviews, this review focuses on the synthesis of nano-compounds utilizing plant extracts, which lack comprehensive reports. In order to synthesize diverse nanostructures, researchers have discovered a sustainable and cost-effective method of harnessing functional groups in plant extracts. Each plant extract is discussed in detail, along with its potential applications, demonstrating the remarkable morphological diversity achieved by using these green synthesis approaches. A reduction and capping agent made from plant extracts is aligned with the principles of green chemistry and offers economic advantages as well as paving the way for industrial applications. In this review, it is discussed the significance of using plant extracts to synthesize nano-compounds, emphasizing their potential to shape the future of nanomaterials in a sustainable and ecologically friendly manner.

Unveiling the antibacterial and antifungal potential of biosynthesized silver nanoparticles from Chromolaena odorata leaves

This research investigates the biogenic synthesis of silver nanoparticles (AgNPs) using the leaf extract of Chromolaena odorata (Asteraceae) and their potential as antibacterial and antifungal agents. Characterization techniques like ultraviolet-visible, Fourier transform infrared (FTIR), Dynamic light scattering and zeta potential (DLS), X-ray diffraction (XRD), transmission electron microscopy (TEM), and field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy (FESEM-EDX) confirmed the formation of spherical (AgNPs). UV-vis spectroscopy reaffirms AgNP formation with a peak at 429 nm. DLS and zeta potential measurements revealed an average size of 30.77 nm and a negative surface charge (- 0.532 mV). Further, XRD analysis established the crystalline structure of the AgNPs. Moreover, the TEM descriptions indicate that the AgNPs are spherical shapes, and their sizes ranged from 9 to 22 nm with an average length of 15.27 nm. The X-ray photoelectron spectroscopy (XPS) analysis validated the formation of metallic silver and elucidated the surface state composition of AgNPs. Biologically, CO-AgNPs showed moderate antibacterial activity but excellent antifungal activity against Candida tropicalis (MCC 1559) and Trichophyton rubrum (MCC 1598). Low MIC values (0.195 and 0.390 mg/mL) respectively, suggest their potential as effective antifungal agents. This suggests potential applications in controlling fungal infections, which are often more challenging to treat than bacterial infections. Molecular docking results validated that bioactive compounds in C. odorata contribute to antifungal activity by interacting with its specific domain. Further research could pave the way for the development of novel and safe antifungal therapies based on biogenic nanoparticles.

Nickel oxide nanoparticles: A new generation nanoparticles to combat bacteria Xanthomonas oryzae pv. oryzae and enhance rice plant growth

Recently, nanotechnology is among the most promising technologies used in all areas of research. The production of metal nanoparticles using plant parts has received significant attention for its environmental friendliness and effectiveness. Therefore, we investigated the possible applications of biological synthesized nickel oxide nanoparticles (NiONPs). In this study, NiONPs were synthesized through biological method using an aqueous extract of saffron stigmas (Crocus sativus L). The structure, morphology, purity, and physicochemical properties of the obtained NPs were confirmed through Scanning/Transmission Electron Microscopy attached with Energy Dispersive Spectrum, X-ray Diffraction, and Fourier transform infrared. The spherically shaped NiONPs were found by Debye Scherer's formula to have a mean dimension of 41.19 nm. The application of NiONPs in vitro at 50, 100, and 200 μg/mL, respectively, produced a clear region of 2.0, 2.2, and 2.5 cm. Treatment of Xoo cell with NiONPs reduced the growth and biofilm formation, respectively, by 88.68% and 83.69% at 200 μg/mL. Adding 200 μg/mL NiONPs into Xoo cells produced a significant amount of ROS in comparison with the control. Bacterial apoptosis increased dramatically from 1.05% (control) to 99.80% (200 μg/mL NiONPs). When compared to the control, rice plants treated with 200 μg/mL NiONPs significantly improved growth characteristics and biomass. Interestingly, the proportion of diseased leaf area in infected plants with Xoo treated with NiONPs reduced to 22% from 74% in diseased plants. Taken together, NiONPs demonstrates its effectiveness as a promising tool as a nano-bactericide in managing bacterial infection caused by Xoo.

A comprehensive review on Moringa oleifera nanoparticles: importance of polyphenols in nanoparticle synthesis, nanoparticle efficacy and their applications

Moringa oleifera is one of the popular functional foods that has been tremendously exploited for synthesis of a vast majority of metal nanoparticles (NPs). The diverse secondary metabolites present in this plant turn it into a green tool for synthesis of different NPs with various biological activities. In this review, we discussed different types of NPs including silver, gold, titanium oxide, iron oxide, and zinc oxide NPs produced from the extract of different parts of M. oleifera. Different parts of M. oleifera take a role as the reducing, stabilizing, capping agent, and depending on the source of extract, the color of solution changes within NP synthesis. We highlighted the role of polyphenols in the synthesis of NPs among major constituents of M. oleifera extract. The different synthesis methods that could lead to the formation of various sizes and shapes of NPs and play crucial role in biomedical application were critically discussed. We further debated the mechanism of interaction of NPs with various sizes and shapes with the cells, and further their clearance from the body. The application of NPs made from M. oleifera extract as anticancer, antimicrobial, wound healing, and water treatment agent were also discussed. Small NPs show better antimicrobial activity, while they can be easily cleared from the body through the kidney. In contrast, large NPs are taken by the mono nuclear phagocyte system (MPS) cells. In case of shape, the NPs with spherical shape penetrate into the bacteria, and show stronger antibacterial activity compared to the NPs with other shapes. Finally, this review aims to correlate the key characteristics of NPs made from M. oleifera extract, such as size and shape, to their interactions with the cells for designing and engineering them for bio-applications and especially for therapeutic purposes.

A comprehensive review on antibacterial analysis of natural extract-based metal and metal oxide nanoparticles

Pharmaceutical, food packing, cosmetics, agriculture, energy storage devices widely utilize metal and metal oxide nanoparticles prepared via different physical and chemical methods. It resulted in the release of several dangerous compounds and solvents as the nanoparticles were being formed. Currently, Researchers interested in preparing nanoparticles (NPs) via biological approach due to their unique physiochemical properties which took part in reducing the environmental risks. However, a number of microbial species are causing dangerous illnesses and are a threat to the entire planet. The metal and metal oxide nanoparticles played a significant role in the identification and elimination of microbes when prepared using natural extract. Its biological performance is thus also becoming exponentially more apparent than it was using in conventional techniques. Despite the fact that they hurt germs, their small size and well-defined shape encourage surface contact with them. The generation of Reactive Oxygen Species (ROS), weakens the bacterial cell membrane by allowing internal cellular components to seep out. The bacterium dies as a result of this. Numerous studies on different nanoparticles and their antibacterial efficacy against various diseases are still accessible. The main objective of the biogenic research on the synthesis of key metals and metal oxides (such as gold, silver, titanium dioxide, nickel oxide, and zinc oxide) using various plant extracts is reviewed in this study along with the process of nanoparticle formation and the importance of phytochemicals found in the plant extract.

Hypothesizing the Green Synthesis of Tamoxifen Loaded Magnetic Nanoparticles for the Treatment of Breast Cancer

Breast cancer is the second leading cause of death all over the world and is not only limited to females but also affects males. For estrogen receptor-positive breast cancer, tamoxifen has been considered the gold-line therapy for many decades. However, due to the side effects associated with the use of tamoxifen, its use is only limited to individuals in high-risk groups and limits its clinical application to moderate and/or lower-risk groups. Thus, there is a necessity to decrease the dose of tamoxifen, which can be achieved by targeting the drug to breast cancer cells and limiting its absorption to other body parts. Artificial antioxidants used in the formulation preparation are assumed to upsurge the risk of cancer and liver damage in humans. The need of the hour is to explore bioefficient antioxidants from natural plant sources as they are safer and additionally possess antiviral, anti-inflammatory, and anticancer properties. The objective of this hypothesis is to prepare tamoxifen-loaded PEGylated NiO nanoparticles using green chemistry, tumbling the toxic effects of the conventional method of synthesis for targeted delivery to breast cancer cells. The significance of the work is to hypothesize a green method for the synthesis of NiO nanoparticles that are eco-friendly, cost-effective, decrease multidrug resistance, and can be used for targeted therapy. Garlic extract contains an organosulfur compound (Allicin) which has drug-metabolizing, anti-oxidant, and tumour growth inhibition effects. In breast cancer, allicin sensitizes estrogen receptors, increasing the anticancer efficacy of tamoxifen and reducing offsite toxicity. Thus, this garlic extract would act as a reducing agent and a capping agent. The use of nickel salt can help in targeted delivery to breast cancer cells and, in turn, reduces drug toxicity in different organs. This novel strategy may aim for cancer management with less toxic agents acting as an apt therapeutic modality.

Green structure orienting and reducing agents of wheat peel extract induced abundant surface oxygen vacancies and transformed the nanoflake morphology of NiO into a plate-like shape with enhanced non-enzymatic urea sensing application

Researchers are increasingly focusing on using biomass waste for green synthesis of nanostructured materials since green reducing, capping, stabilizing and orientation agents play a significant role in final application. Wheat peel extract contains a rich source of reducing and structure orienting agents that are not utilized for morphological transformation of NiO nanostructures. Our study focuses on the role of wheat peel extract in morphological transformation during the synthesis of NiO nanostructures as well as in non-enzymatic electrochemical urea sensing. It was observed that the morphological transformation of NiO flakes into nanoplatelets took place in the presence of wheat peel extract during the preparation of NiO nanostructures and that both the lateral size and thickness of the nanostructures were significantly reduced. Wheat peel extract was also found to reduce the optical band gap of NiO. A NiO nanostructure prepared with 5 mL of wheat peel extract (sample 2) was highly efficient for the detection of urea without the use of urease enzyme. It has been demonstrated that the induced modification of NiO nanoplatelets through the use of structure-orienting agents in the wheat peel has enhanced their electrochemical performance. A linear range of 0.1 mM to 13 mM was achieved with a detection limit of 0.003 mM in the proposed urea sensor. The performance of the presented non-enzymatic urea sensor was evaluated in terms of selectivity, stability, reproducibility, and practical application, and the results were highly satisfactory. As a result of the high surface active sites on sample 2, the low charge transfer resistance, as well as the high exposure to the surface active sites of wheat peel extract, sample 2 demonstrated enhanced performance. The wheat peel extract could be used for the green synthesis of a wide range of nanostructured materials, particularly metal/metal oxides for various electrochemical applications.

Moringa oleifera Use in Maintaining Oral Health and Its Potential Use in Regenerative Dentistry

Phytomedicine refers to the use of naturally derived products to cure and mitigate human conditions. Natural products have the advantages of causing minimum side effects, being biocompatible, available, and economical, with a wide array of biological activities. Reports have described the use of natural products with antimicrobial and anti-inflammatory properties to treat oral conditions and promote wound healing. Moringa oleifera, known as the "drumstick" or "horseradish" tree, is believed to have medicinal properties regarding a range of medical conditions, though there is limited information on its use in oral medicine. This narrative review focuses on the use of Moringa extracts in the management of oral conditions, including oral infections, inflammatory conditions, the remineralization of hard tissues, oral wound healing, and tissue regeneration, drawing from both in vitro and in vivo studies which indicate that the potential of Moringa extracts in supporting dentin-pulp regeneration after caries or trauma is worthy of more careful consideration.

Biosynthesis of magnesium oxide and calcium carbonate nanoparticles using Moringa oleifera extract and their effectiveness on the growth, yield and photosynthetic performance of groundnut (Arachis hypogaea L.) genotypes

Small-scale crop production has been significantly impacted by the heavy price, limited supply, and frequent shortage of inorganic fertilisers, which is partly attributable to the Covid-19 pandemic outbreak and led to rising oil and food prices. Thus, integrating environmentally friendly agricultural practices that can improve crop productivity and advance the sustainability of agricultural cropping systems is critical. This study synthesized and characterised MgO and CaCO3Moringa oleifera nanoparticles and assessed their effects on groundnut genotypes. The effect of biosynthesized MgO and CaCO3 nanoparticles using Moringa oleifera extract on the growth and yield of groundnut genotypes exposed to different concentrations of 50, 100 and 200 mg/L was examined. The experiment was carried laid out in a 3 × 8 factorial completely randomized design (CRD) with eight replicates per treatment. Each plant was sprayed with 5 ml of the solution crystalline size of the MgO and CaCO3 nanoparticles 2.48 nm and 10.30 nm, respectively. Foliar application of nanoparticle treatments was applied weekly except for the negative control. The collected data were subjected to a two-way analysis of variance (ANOVA). Mean separations were done using Tukey's Honest Significant Difference (HSD) at P < 0.05. The findings demonstrated that foliar application of MgO and CaCO3 nanoparticles positively affected groundnut biomass production. The results further revealed that the concentration of 50 mg/L of MgO and 100 mg/L of CaCO3 considerably improved groundnut plant growth, yield, and nodulation in comparison with other treatments. There is a great deal of evidence signifying that foliar applications of 50 mg/L of MgO 100 mg/L CaCO3 contributed greatly to plant growth and crop production. Therefore, 50 mg/L of MgO and 100 mg/L CaCO3 nanoparticles foliar application could be recommended as nano-fertilisers application rate for groundnut production.

Bacterial cell permeability study by metal oxide and mixed metal oxide nanoparticles: analysis of the factors contributing to the antibacterial activity of nanoparticles

In this work, we investigate the nanoparticle-cell wall interaction by NiO and mixed metal oxide CuO-NiO nanoparticles. We have synthesized and characterized the nanoparticles using XRD, FESEM, EDS, UV vis. spectroscopy, FTIR, Zeta, and TEM analysis in our previous work. Furthermore, a preliminary antibacterial study showed that both the nanoparticles performed very well as antibacterial agents. In this extended work, we investigate the mechanism of interaction of NiO and CuO-NiO nanoparticles with S. aureus and E. coli cells as there are number of studies for antibacterial mechanism of CuO nanoparticles. The uptake of crystal violet dye in the outer bacterial membrane, the release of ß-galactosidase enzyme, and relative electric conductivity assay were used to investigate changes in the permeability and integrity of the cell membrane. Superoxide ions, which are produced intracellularly as ROS by nanoparticles, severely damage bacterial membranes. Zeta potential measurement, which resulted in surface charge neutralization, proved membrane instability. FTIR analysis was used to identify changes in the proteins, carbohydrates, and fatty acids that make up the chemical composition of cell surfaces. AFM imaging demonstrated extensive alteration of the nanomechanical and surface characteristics. Confocal microscopy examination supported the DNA fragmentation and nanoparticle-cell adhesion. Due to their enhanced antibacterial activity when compared to monometallic oxide nanoparticles, this study demonstrated that mixed metal oxides can be employed in the health and biomedical sectors.

Green and sustainable synthesis of nanomaterials: Recent advancements and limitations

Nanomaterials have been widely used in diverse fields of research such as engineering, biomedical science, energy, and environment. At present, chemical and physical methods are the main methods for large-scale synthesis of nanomaterials, but these methods have adverse effects on the environment, and health issues, consume more energy, and are expensive. The green synthesis of nanoparticles is a promising and environmentally friendly approach to producing materials with unique properties. Natural reagents such as herbs, bacteria, fungi, and agricultural waste are used in the green synthesis of nanomaterials instead of hazardous chemicals and reduce the carbon footprint of the synthesis process. Green synthesis of nanomaterials is highly beneficial compared to traditional methods due to its low cost, negligible pollution level, and safety for the environment and human health. Nanoparticles possess enhanced thermal and electrical conductivity, catalytic activity, and biocompatibility, making them highly attractive for a range of applications, including catalysis, energy storage, optics, biological labeling, and cancer therapy. This review article provides a comprehensive overview of recent advancements in the green synthesis routes of different types of nanomaterials, including metal oxide-based, inert metal-based, carbon-based, and composite-based nanoparticles. Moreover, we discuss the various applications of nanoparticles, emphasizing their potential to revolutionize fields such as medicine, electronics energy, and the environment. The factors affecting the green synthesis of nanomaterials, and their limitations are also pointed out to decide the direction of this research field, Overall, this paper highlights the importance of green synthesis in promoting sustainable development in various industries.

Bio-functionalized nickel-silica nanoparticles suppress bacterial leaf blight disease in rice (Oryza sativa L.)

Introduction

Bacterial leaf blight (BLB) caused by Xanthomonas oryzae pv. oryzae (Xoo) is one of the most devastative diseases that threatens rice plants worldwide. Biosynthesized nanoparticle (NP) composite compounds have attracted attention as environmentally safe materials that possess antibacterial activity that could be used in managing plant diseases.

Methods

During this study, a nanocomposite of two important elements, nickel and silicon, was biosynthesized using extraction of saffron stigmas (Crocus sativus L.). Characterization of obtained nickel-silicon dioxide (Ni-SiO2) nanocomposite was investigated using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Transmission/Scanning electron microscopy (TEM/SEM), and energy-dispersive spectrum (EDS). Antibacterial activities of the biosynthesized Ni-SiO2 nanocomposite against Xoo were tested by measuring bacterial growth, biofilm formation, and dead Xoo cells.

Results and discussions

The bacterial growth (OD600) and biofilm formation (OD570) of Xoo treated with distilled water (control) was found to be 1.21 and 1.11, respectively. Treatment with Ni-SiO2 NPs composite, respectively, reduced the growth and biofilm formation by 89.07% and 80.40% at 200 μg/ml. The impact of obtained Ni-SiO2 nanocomposite at a concentration of 200 μg/ml was assayed on infected rice plants. Treatment of rice seedlings with Ni-SiO2 NPs composite only had a plant height of 64.8 cm while seedlings treated with distilled water reached a height of 45.20 cm. Notably, Xoo-infected seedlings treated with Ni-SiO2 NPs composite had a plant height of 57.10 cm. Furthermore, Ni-SiO2 NPs composite sprayed on inoculated seedlings had a decrease in disease leaf area from 43.83% in non-treated infected seedlings to 13.06% in treated seedlings. The FTIR spectra of biosynthesized Ni-SiO2 nanocomposite using saffron stigma extract showed different bands at 3,406, 1,643, 1,103, 600, and 470 cm-1. No impurities were found in the synthesized composite. Spherically shaped NPs were observed by using TEM and SEM. EDS revealed that Ni-SiO2 nanoparticles (NPs) have 13.26% Ni, 29.62% Si, and 57.11% O. Xoo treated with 200 µg/ml of Ni-SiO2 NPs composite drastically increased the apoptosis of bacterial cells to 99.61% in comparison with 2.23% recorded for the control.

Conclusions

The application of Ni-SiO2 NPs significantly improved the vitality of rice plants and reduced the severity of BLB.

Biomedical Applications of Biosynthesized Nickel Oxide Nanoparticles

Nickel oxide nanoparticles have gained tremendous attention recently in a variety of scientific domains thanks to their characteristic chemical, physical, optical, and biological properties. Due to the diversity of applications in various fields, different physicochemical methods have been used to synthesize nickel oxide nanoparticles. However, most conventional methods use hazardous chemicals during synthesis and become liable for potential health risks, while others are expensive and require a lot of energy to synthesize nanoparticles. As a result, the nanoparticles become less biocompatible and biologically inefficient. Biogenic synthesis of nanoparticles is currently proposed as a valuable alternative to the physical and chemical methods, as it is a simple, non-toxic, cheap, green and facile approach. This synthetic method uses biological substrates such as plant extracts, microorganisms, and other biological products to synthesize nickel oxide nanoparticles. The various phytochemicals from plant extracts, enzymes or proteins from microorganisms, and other biological derivatives play as reducing, stabilizing, and capping agents to provide bioactive and biocompatible nickel oxide nanoscale material. This review discusses current findings and trends in the biogenic synthesis of nickel oxide nanoparticles and their biological activities such as antibacterial, antifungal, antileishmanial, and anticancer, with an emphasis on antimicrobial and anticancer activity along with their mechanistic elucidation. Overall, this thorough study provides insight into the possibilities for the future development of green nickel oxide nanoparticles as therapeutic agents for a variety of ailments.

Exploring the Paradigm of Phyto-Nanofabricated Metal Oxide Nanoparticles: Recent Advancements, Applications, and Challenges

The development of nanotechnology, in particular metal oxide nanoparticles, has captured immense scientific attention in the global arena due to their unique properties leading to their unique diverse applications. But the use of toxic precursors and high operational cost make existing methodologies inefficient for synthesising metal oxide nanoparticles (MONPs). Biogenic synthesis of MONPs has been hailed as a more sustainable approach for the synthesis of NPs due to its alignment with the principles of green chemistry. Microorganisms (bacteria, yeast, algae), animal sources (silk, fur, etc.), and plants are effective, low-cost, and eco-friendly means of synthesizing MONPs since they possess a high bio-reduction abilities to produce NPs of various shapes and sizes. The current review encompasses recent advancements in the field of plant-mediated MONP synthesis and characterisation. The detailed evaluation of various synthesis processes and parameters, key influencing factors affecting the synthesis efficiency and product morphology, practical applications with insight into the associated limitations and challenges presents a valuable database that will be helpful in developing alternative prospects and potential engineering applications.

Photocatalytic Degradation of Food and Juices Dyes via Photocatalytic Nanomaterials Synthesized through Green Synthetic Route: A Systematic Review

The unavailability of non-poisonous and hygienic food substances is the most challenging issue of the modern era. The uncontrolled usage of toxic colorant moieties in cosmetics and food manufacturing units leads to major threats to human life. The selection of environmentally benign approaches for the removal of these toxic dyes has gained the utmost attention from researchers in recent decades. This review article's main aim is the focus on the application of green-synthesized nanoparticles (NPs) for the photocatalytic degradation of toxic food dyes. The use of synthetic dyes in the food industry is a growing concern due to their harmful effects on human health and the environment. In recent years, photocatalytic degradation has emerged as an effective and eco-friendly method for the removal of these dyes from wastewater. This review discusses the various types of green-synthesized NPs that have been used for photocatalytic degradation (without the production of any secondary pollutant), including metal and metal oxide NPs. It also highlights the synthesis methods, characterization techniques, and photocatalytic efficiency of these NPs. Furthermore, the review explores the mechanisms involved in the photocatalytic degradation of toxic food dyes using green-synthesized NPs. Different factors that responsible for the photodegradation, are also highlighted. Advantages and disadvantages, as well as economic cost, are also discussed briefly. This review will be advantageous for the readers because it covers all aspects of dyes photodegradation. The future feature and limitations are also part of this review article. Overall, this review provides valuable insights into the potential of green-synthesized NPs as a promising alternative for the removal of toxic food dyes from wastewater.

Exploring the potential of eco-friendly silver nanoparticles to inhibit azole-resistant clinical isolates of Candida spp

The antimicrobial activity and biological efficiency of silver nanoparticles (AgNps) have been widely described and can be modeled through stabilizing and reducing agents, especially if they exhibit biocidal properties, which can enhance bioactivity against pathogens. The selective action of AgNps remains a major concern. In this regard, the use of plant extracts for the green synthesis of nanoparticles offers advantages because it improves the toxicity of Nps for microorganisms and is harmless to normal cells. However, biological evaluations of the activity of AgNps synthesized using different reducing agents are determined independently, and comparisons are frequently overlooked. Thus, we investigated and compared the antifungal and cytotoxic effects of two ecological AgNps synthesized from Moringa oleifera aqueous leaf extract (AgNp-M) and glucose (AgNp-G) against azole-resistant clinical isolates of Candida spp. and nontumor mammalian cells. Synthesized AgNps exhibited an antifungal effect on planktonic cells of drug-resistant C. albicans and C. tropicalis (MIC 0.21-52.6 µg/mL). The toxicity was influenced by size. However, the use of M. oleifera extracts allows us to obtain AgNps that are highly selective and nongenotoxic to Vero cells due to modifications of the shape and surface. Therefore, these results suggest that AgNp-M has antimicrobial potential and deserves further investigation for biomedical applications.

Comparative synthesis and characterization of nanocomposites using chemical and green approaches including a comparison study on in vivo and in vitro biological properties

In this study, the anti-diabetic, anti-inflammatory, anti-cytotoxic, and antibacterial effects of various substances were studied in vitro. Malachite green's photocatalytic effects were used to determine the optimised sample while it was exposed to visible light. The intended nanocomposites were created without any contaminants, according to XRD data. The overall characterisation results of the green synthesis of CS/SiO₂/TiO₂/CeO₂/Fe₃O₄ nanocomposites (CSTCF(G)) were superior to those of the chemical synthesis of CS/SiO₂/TiO₂/CeO₂/Fe₃O₄ nanocomposites (CSTCF(C)). At the five doses examined, the green synthesis of CS/SiO₂/TiO₂/CeO₂/Fe₃O₄ nanocomposites (CSTCF(G)) and chemical synthesis of CS/SiO₂/TiO₂/CeO₂/Fe₃O₄ nanocomposites (CSTCF(C)) resulted in higher α-glucosidase inhibition percentages in the antidiabetic assay. HaCaT cells and MCF-7 cells were less harmful when treated with chemically synthesized CS/SiO₂/TiO₂/CeO₂/Fe₃O₄ nanocomposites (CSTCF(C)), and green synthesized CS/SiO₂/TiO₂/CeO₂/Fe₃O₄ nanocomposites (CSTCF(G)). From the results of the cytotoxicity tests against MCF-7 cells and HaCaT cells using the nanocomposites, the IC₅₀ values of Salacia reticulata, green synthesized CS/SiO₂/TiO₂/CeO₂/Fe₃O₄ nanocomposites (CSTCF(G)), and chemically synthesized CS/SiO₂/TiO₂/CeO₂/Fe₃O₄ nanocomposites (CSTCF(C)) were calculated. This research work shows that the green synthesized CS/SiO₂/TiO₂/CeO₂/Fe₃O₄ nanocomposites (CSTCF(G)) have strong anti-inflammatory, antibacterial and anti-diabetic properties, as well as considerable suppression of high activation in in vivo zebrafish embryo toxicity. The novelty of this study focused on the revelation that green synthesized nanocomposites are more affordable, environmentally friendly and biocompatible than chemically synthesized ones.

Excellent photocatalytic and antibacterial activities of bio-activated carbon decorated magnesium oxide nanoparticles

Green production of nanomaterials are restrict toxic substances and motivated the noxious free environment. Photocatalysis and antibacterial resistance are more promising and efficient fields for their chemical reductants and clean environment. Herein, we adopted a green and simple method for the biosynthesis of MgO NPs using Manilkara zapota as a bio source. Recently, the green synthesis of magnesium oxide nanoparticles has been a keen interest amongst researchers and scientists due to its simplicity eco-friendliness, non-toxic, inexpensive and potential to perform as an antibacterial agent. Activated carbon/Magnesium oxide (AC/MgO) photocatalyst was blended through a simple solution evaporation method. The surface electron microscopy (SEM) study reviles that AC/MgO had smooth and aggregated particles. The Fourier transform infrared (FT-IR) and x-ray diffraction (XRD) study confirms the structural formation and incorporation of nanoparticles into the AC matrix. Results confirmed the flourishing integration of MgO NPs over the activated carbon matrix. The electron movement and valency of AC/MgO photocatalyst reduced the bandgap and their findings were characterized by ultra visible diffuse reflectance spectroscopy (UV-DRS) and x-ray photoelectron spectroscopy (XPS). The blended AC/MgO photocatalyst was analyzed for photodegradation of Rhodamine- B (Rh-B) dye using a UV-visible spectrophotometer. The degradation study projects that the AC/MgO photocatalyst degrades (Rh-B) dye with 99% efficiency under simulated solar irradiation. This efficient degradation of (Rh-B) dye by AC/MgO photocatalyst is ascribed to the synergetic AC as catalytic support and adsorbent and MgO as photocatalyst. Finally, the photocatalytic material shows a better bactericidal effect in both gram-positive bacteria Escherichia coli-745 and gram-negative bacteria Staphylococcus aureus-9779. The AC/MgO photocatalyst is effectively used in bacteriocidal and photocatalytic removal of dyes and can be used for further development of water reuse and bio-medical fields. In addition, this research shows a viable method for synthesizing a cheap and effective AC/MgO for the photocatalytic destruction of organic pollutants.

In-vitro cytotoxicity of nickel oxide nanoparticles against L-6 cell-lines: MMP, MTT and ROS studies

In the present work we synthesize nickel oxide nanoparticles (NiO NPs) using Rhododendron arboretum (flower) (RNi), Tinospora cordifolia (stems) (GNi), Corylus jacquemontii (seeds) (CNi), and Nardostachys jatamansi (roots) (NNi) extracts by co-precipitation method. The synthesized NiO NPs were characterized in detail in terms of their morphological, crystalline nature, structural and antiproliferative activity against rat skeletal myoblast (L-6) cell lines. Morphological studies confirmed the formation of nanoparticles, while the structural and compositional characterization revealed the well-crystallinity and high purity of the synthesized nanoparticles. For biological applications and cytotoxicity examinations of the synthesized NPs, the rat skeletal myoblast (L-6) cell lines were subjected to study. By detailed cytotoxic investigations, it was observed that among the four kinds of NiO NPs prepared through different plant extracts, the Tinospora cordifolia (stems) showed strong antiproliferative activity against rat skeletal myoblast (L-6) cell lines and the calculated IC₅₀ was 1.671 mg/mL. The observed antiproliferative activity towards different NiO NPs were in the order of GNi > NNi > RNi > CNi. The present studies demonstrate that simply synthesized NiO can efficiently be used as antiproliferative agents.

Neuroprotective potential of Moringa oleifera mediated by NF-kB/Nrf2/HO-1 signaling pathway: A review

Moringa oleifera is a traditional Indian herb belonging to the Moringaceae family, it is commonly known as the horse-radish tree, drumstick, or sahajna. In developing countries, Moringa is used as feed for both humans and animals due to its well-known antioxidant, anti-inflammatory, and anti-apoptotic properties owing to its several phytoconstituents including β-carotene, quercetin, kaempferol, ascorbic acid, flavonoids, phenolic acid, rhamnose, glycosylates, glucomoringin, and isothiocyanates. These constituents help to maintain the brain antioxidant enzyme levels, mitochondrial functions, and neurogenesis, showing neuroprotective effects in several neurodegenerative disorders including Parkinson's Disease, Alzheimer's Disease, Huntington's Disease, and Amyotrophic lateral sclerosis. This review discusses various phytoconstituent of moringa and their therapeutic potential in various neurological disorders. Additionally, we also concise the safety and toxicity profile, of different molecular pathways involved in the neuroprotective effect of M. oleifera including M. oleifera nanoparticles for better therapeutic value. PRACTICAL APPLICATIONS: Several clinical and preclinical studies on Moringa oleifera have been conducted, and the outcomes indicate moringa could be used in the treatment of brain disorders. As a result, we conclude that moringa and its nanoformulations could be employed to treat neurological problems. In the future, M. oleifera phytoconstituents could be evaluated against specific signaling pathways, which could aid researchers in discovering their mechanism of action. Furthermore, the use of moringa as a nutraceutical owing to its myriad pharmacological potential will go a long way in boosting the economy of countries that grow moringa on a large scale.

Palliative effect of Moringa olifera-mediated zinc oxide nanoparticles against acrylamide-induced neurotoxicity in rats

Repeated acrylamide (ACR) exposure in experimental animals and humans causes variable degrees of neuronal damage. Because of its unique features, several green synthesized nanomaterials are explored for neuromodulatory activity. Hence, this study investigated the effect of green synthesized zinc oxide nanoparticles using Moriga olifera leaves extract (MO-ZnONP) against acrylamide (ACR)-induced neurobehavioral and neurotoxic impacts in rat. Forty male Sprague Dawley rats were distributed into four groups orally given distilled water, MO-ZnONP (10 mg/kg b.wt), ACR (20 mg/kg b.wt), or MO-ZnONP + ACR for 60 days. Gait quality and muscular, motor, and sensory function were assessed. Acetylcholinesterase (AChE), dopamine, catalase, malondialdehyde (MDA), and Zn brain contents were determined. Brain histopathology and immunohistochemical localization of the amyloid-β protein and abnormal Tau were performed. The results revealed that MO-ZnONP significantly reduced ACR-induced sensory dysfunctions, hind limb abnormality, and motor deficits. Additionally, the ACR-induced increase in dopamine and AChE were significantly supressed by MO-ZnONP. Besides, MO-ZnONP significantly restored catalase and Zn content but reduced increased MDA brain content resulting from ACR. Furthermore, the ACR-induced neurodegenerative changes and increased amyloid-β and phosphorylated Tau immunoexpression was significantly abolished by MO-ZnONP. Conclusively, MO-ZnONP could be used as a biologically effective compound for mitigating ACR's neurotoxic and neurobehavioral effects.

Photocatalysis and adsorption kinetics of azo dyes by nanoparticles of nickel oxide and copper oxide and their nanocomposite in an aqueous medium

Background

Azo dyes are recalcitrant organic pollutants present in textile industry effluents. Conventional treatment methods to remove them come with a range of disadvantages. Nanoparticles and their nanocomposites offer more efficient, less expensive and easy to handle wastewater treatment alternative.

Methods

In this study, nanoparticles of nickel oxide (NiO-NPs), copper oxide (CuO-NPs) and their nanocomposite (NiO/CuO-NC) were synthesized using co-precipitation method. The functional groups present on the surface of synthesized nanomaterials were verified using Fourier-transform infrared spectroscopy (FTIR). Surface morphology was assessed using scanning electron microscopy (SEM) whereas purity, shape and size of the crystallite were determined using X-ray diffraction (XRD) technique. The potential of these nanomaterials to degrade three dyes i.e., Reactive Red-2 (RR-2), Reactive Black-5 (RB-5) and Orange II sodium salt (OII) azo dyes, was determined in an aqueous medium under visible light (photocatalysis). The photodegradation effectiveness of all nanomaterials was evaluated under different factors like nanomaterial dose (0.02-0.1 g 10 mL^-1), concentration of dyes (20-100 mg L^-1), and irradiation time (60-120 min). They were also assessed for their potential to adsorb RR-2 and OII dyes.

Results

Results revealed that at optimum concentration (60 mgL^-1) of RR-2, RB-5, and OII dyes, NiO-NPs degraded 90, 82 and 83%, CuO-NPs degraded 49, 34, and 44%, whereas the nanocomposite NiO/CuO-NC degraded 92, 93, and 96% of the said dyes respectively. The nanomaterials were categorized as the efficient degraders of the dyes in the order: NiO/CuO-NC > NiO-NPs > CuO-NPs. The highest degradation potential shown by the nanocomposite was attributed to its large surface area, small particles size, and quick reactions which were proved by advance analytical techniques. The equilibrium and kinetic adsorption of RR-2 and OII on NiO-NPs, CuO-NPs, and NiO/CuO-NC were well explained with Langmuir and Pseudo second order model, respectively (R² ≥ 0.96). The maximum RR-2 adsorption (103 mg/g) was obtained with NiO/CuO-NC. It is concluded that nanocomposites are more efficient and promising for the dyes degradation from industrial wastewater as compared with dyes adsorption onto individual NPs. Thus, the nanocomposite NiO/CuO-NC can be an excellent candidate for photodegradation as well as the adsorption of the dyes in aqueous media.

Mahmoud E, Elansary HO, Sannaningaiah D. Effect of Biofunctional Green Synthesized MgO-Nanoparticles on Oxidative-Stress-Induced Tissue Damage and Thrombosis

The present study describes the green biofunctional synthesis of magnesium oxide (MgO) nanoparticles using the aqueous Tarenna asiatica fruit extract. The characterization of Tarenna asiatica fruit extract MgO nanoparticles (TAFEMgO NPs) was achieved by X-ray powder diffraction, UV-Vis spectroscopy, FTIR, TEM, SEM, and energy-dispersive X-ray diffraction. TAFEMgO NPs scavenged the DPPH free radicals with an IC50 value of 55.95 μg/μL, and it was highly significant compared to the standard. To authenticate the observed antioxidant potential of TAFEMgO NPs, oxidative stress was induced in red blood cells (RBC) using sodium nitrite (NaNO₂). Interestingly, TAFEMgO NPs ameliorated the RBC damage from oxidative stress by significantly restoring the stress parameters, such as the protein carbonyl content (PCC), lipid peroxidation (LPO), total thiol (TT), super-oxide dismutase (SOD), and catalase (CAT). Furthermore, oxidative stress was induced in-vivo in Sprague Dawley female rats using diclofenac (DFC). TAFEMgO NPs normalized the stress parameters in-vivo and minimized the oxidative damage in tissues. Most importantly, TAFEMgO NPs restored the function and architecture of the damaged livers, kidneys, and small intestines by regulating biochemical parameters. TAFEMgO NPs exhibited an anticoagulant effect by increasing the clotting time from 193 s in the control to 885 s in the platelet rich plasma. TAFEMgO NPs prolonged the formation of the clot process in the activated partial thromboplastin time and the prothrombin time, suggest the effective involvement in both intrinsic and extrinsic clotting pathways of the blood coagulation cascade. TAFEMgO NPs inhibited adenosine di-phosphate (ADP)-induced platelet aggregation. TAFEMgO NPs did not show hemolytic, hemorrhagic, and edema-inducing properties at the tested concentration of 100 mg/kgbody weight, suggesting its non-toxic property. In conclusion, TAFEMgO NPs mitigates the sodium nitrite (NaNO₂)- and diclofenac (DFC)-induced stress due to oxidative damage in both in vitro and in vivo experimental models.

Inhibitory Effect of Bi2O3NPs Produced by green synthesis method

Because of its medical and biological uses, green nanoparticle production has gotten a lot of attention. Bismuth oxide nanoparticles (Bi2O3 NP) were synthesized using aqueous extract from cocoa plants in this study, and the result was examined using an ultraviolet-visible, spectro-photometer, Fourier transform infrared, X-ray diffraction, and atomic force microscopy, The samples’ antibacterial activity was tested against a variety of microorganisms.

Biosynthesis of Sulphur Nanoparticles and discovering its effectiveness for some biological applications

In this research, sulfur nanoparticles were prepared using the plant synthesis method, and the particles were identified through biological equipment for the purpose of adding them for application purposes. The structural, surface, and optical properties of S-NPs were investigated. Transmittance and band gap were calculated using an optical approach to explore the optical properties. Surface and structural properties of the film were investigated using SEM micrographs and an X-ray diffraction pattern, respectively. The antibacterial and antifungal potential of S-NPs has been identified after extensive research.

Recent trends in the application of nanoparticles in cancer therapy: The involvement of oxidative stress

In the biomedical area, the interdisciplinary field of nanotechnology has the potential to bring numerous unique applications, including better tactics for cancer detection, diagnosis, and therapy. Nanoparticles (NPs) have been the topic of many research and material applications throughout the last decade. Unlike small-molecule medications, NPs are defined by distinct physicochemical characteristics, such as a large surface-to-volume ratio, which allows them to permeate live cells with relative ease. The versatility of NPs as both therapeutics and diagnostics makes them ideal for a broad spectrum of illnesses, from infectious diseases to cancer. A significant amount of data has been participated in the current scientific publications, emphasizing the concept that NPs often produce reactive oxygen species (ROS) to a larger degree than micro-sized particles. It is important to note that oxidative stress governs a wide range of cell signaling cascades, many of which are responsible for cancer cell cytotoxicity. Here, we aimed to provide insight into the signaling pathways triggered by oxidative stress in cancer cells in response to several types of nanomaterials, such as metallic and polymeric NPs and quantum dots. We discuss recent advances in developing integrated anticancer medicines based on NPs targeted to destroy malignant cells by increasing their ROS setpoint.

Green synthesis of ionic liquid mediated neodymium oxide nanoparticles via Couroupita guianensis abul leaves extract with its biological applications

Bio-nanoparticles have created a new era of rapid, harmless and nontoxic drugs for various biomedical applications. The nanoparticles (NPs) of rare earth metal oxides attract researcher's attention due to their excellent chemical and physical properties that exhibit potential activity against disease causing pathogens. Couroupita guianensis (C. guianensis) abul is a medicinal plant whose leaves are effectively used for the synthesis of neodymium oxide (Nd₂O₃) NPs. The 1-butyl 3-methyl imidazolium tetrafluoroborate (BMIM BF₄) ionic liquid is used as a stabilizing agent to get better the morphology and biological properties of Nd₂O₃ NPs. 1-Butene, 4,4-diethoxy-2-methyl is the main compound in C. guianensis abul leaves extract was confirmed by GCMS analysis. The structure of synthesized Nd₂O₃ (without ionic liquid) and Nd₂O₃-IL (with ionic liquid) NPs is identified by powder X-ray diffraction (PXRD). The vibrations of the different functional groups were investigated by Fourier-transform infrared (FTIR) and Raman spectroscopy. In UV-Vis spectra, the optical absorption was identified to be 210 and 221nm of Nd₂O₃ and Nd₂O₃-IL samples and the PL spectrum provides blue and green emission peaks at 386 and 554 nm. The X-ray photoelectron spectroscopy (XPS) and DLS spectra illustrate the electronic configuration and particle size of the synthesized Nd₂O₃-IL NPs. The morphology, surface nature and lattice spacing were analyzed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The purity and weight percentage of the compound presented can be identified by the energy-dispersive X-ray spectroscopy (EDX). The biomedical properties such as antibacterial, antioxidant, antidiabetic, anti-inflammatory and anticancer activities were investigated. Finally, the overall biocompatible studies reveal that the ionic liquid assisted Nd₂O₃ NPs can be considered as a potential drug for pharmaceutical and biomedical applications.

Methods for Green Synthesis of Metallic Nanoparticles Using Plant Extracts and their Biological Applications - A Review

Nanotechnology, a fast-developing branch of science, is gaining extensive popularity among researchers simply because of the multitude of applications it can offer. In recent years, biological synthesis has been widely used instead of physical and chemical synthesis methods, which often produce toxic products. These synthesis methods are now being commonly adapted to discover new applications of nanoparticles synthesized using plant extracts. In this review, we elucidate the various ways by which nanoparticles can be biologically synthesized. We further discuss the applications of these nanoparticles.

A facile hydrothermal synthesis of high-efficient NiO nanocatalyst for preparation of 3,4-dihydropyrimidin-2(1H)-ones

The present work introduces a one-step and facile hydrothermal procedure as a green process for the first time to synthesize nickel(II) oxide (NiO) nanoparticles. The as-prepared nanomaterials were used as high efficient, low toxic and cost catalyst for the synthesis of some organic compounds. Ni(NO₃)₂ and some natural extract were used as a surfactant for the first time to synthesis NiO nanomaterials. A high synthesis yield (91%) was obtained for S₂. Rietveld analysis affirmed the cubic crystal system of the obtained NiO nanocatalyst. The morphology studies were carried out with the FESEM method and the images revealed a change from non-homogenous to homogenous spherical particles when the Barberryas was used instead of orange blossom surfactant. Besides, the images revealed that the particle size distribution was in the range of 20 to 60 nm. The synthesized catalysts were used for the first time in Biginelli multicomponent reactions (MCRs) for the preparation of 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) under the present facile reaction conditions. High yield (97%) of the final product was achieved at the optimum condensation reaction conditions (Catalyst: 60 mg; temperature: 90 °C and time: 90 min) when ethyl acetoacetate/methyl acetoacetate (1 mmol), benzaldehyde (1 mmol) and urea (1.2 mmol) were used. A kinetic study affirmed pseudo-first-order model for Biginelli reactions followed the pseudo-first-order model.

Bone Regeneration in Rat using Polycaprolactone/Gelatin/Epinephrine Scaffold

Solid supports like the extracellular matrix network are necessary for bone cell attachment and start healing in the damaged bone. Scaffolds which are made of different materials are widely used as a supportive structure in bone tissue engineering. In the current study, a 3-D Polycaprolactone/Gelatin bone scaffold was developed by blending electrospinning and freeze-drying techniques for bone tissue engineering. To improve the efficiency of the scaffold, different concentrations of epinephrine due to its effect on bone healing were loaded. Fabricated scaffolds were characterized by different tests such as surface morphology, FTIR, porosity, compressive strength, water contact angle, degradation rate. The interaction between prepared scaffolds and blood and cells was evaluated by hemolysis, and MTT test, respectively, and bone healing was evaluated by a rat calvaria defect model. Based on the results, the porosity of scaffolds was about 75% and by adding epinephrine, mechanical strength decreased while due to the hydrophilic properties of it, degradation rate increased. In vivo and in vitro studies showed the best cell proliferation and bone healing were in PCL/Gelatin/Epinephrine1%-treated group. These results showed the positive effect of fabricated scaffold on osteogenesis and bone healing and the possibility of using it in clinical trials.

Efficacy of Bacillus subtilis, Moringa oleifera seeds extract and potassium bicarbonate on Cercospora leaf spot on sugar beet

Cercospora leaf spot caused by Cercospora beticola are among the most dangerous plant diseases on sugar beet plants. It causes heavy economic losses, whether on the yield of roots, the percentage of sugar in them, or the quality of sugar produced. In addition to the economic cost caused by chemical control, these chemical pesticides cause an imbalance in the ecosystem and harm the health of humans and animals. In an attempt to search for a safer method than pesticides and environmentally friendly, an evaluation of using biocontrol agents, Bacillus subtilis as cell suspension (10⁸ cell/ml), was conducted in this study. Seeds extract of Moringa oleifera with two concentrations (25 and 50 g/L) and potassium bicarbonate at (5 and10 g/L (compared to fungicide Montoro 30% EC (Propiconazole 15% + Difenoconazole 15%). The evaluation results for twenty-five sugar beet varieties showed a significant discrepancy between these varieties in the extent of their susceptibility to infection with the disease under investigation. In-Vitro, B. subtilis induced an antagonist to C. beticola, and both M. oleifera seeds extract and potassium bicarbonate significantly reduced the linear growth of this pathogen. Under field conditions, the treatments used have given positive results in controlling Cercospora leaf spots. They significantly decreased the severity of disease and prevented C. beticola from creating conidiophores and conidiospores, along with examining their cell walls with the formation of plasmolysis of the fungus cells and reducing both the number and diameter of the spots on the surface leaves; this was demonstrated using a scanning electron microscope (SEM). It is worth noting that the best results obtained were most often when treated with M. oleifera seeds extract, followed by potassium bicarbonate, then cell suspension of B. subtilis. In addition, the percentage of the content of beet roots from total soluble solids and sucrose has improved significantly due to spraying sugar beet plants with the substances mentioned earlier. These treatments also contributed to a significant improvement in the enzymes polyphenol oxidase, peroxidase, and phenylalanine ammonia-lyase.