Multi-functional properties of ternary CeO 2 /SnO 2 /rGO nanocomposites: Visible light driven photocatalyst and heavy metal removal

High stability and selectivity of butterfly pea flower extract-NiAl LDH-based catalysts in the tetracycline degradation

Layered double hydroxide (LDH) is an applicable material that can be modified in various ways. Modifications using natural extracts fulfill the principles of "green chemistry." The preparation of butterfly pea flower extract (BPE)-modified NiAl LDH was completed using the calcination and restacking method. The characteristics of the prepared composites were identified through analysis of functional groups, crystal phase, bandgap energy, surface area and surface morphology. Fourier transform-infrared (FT-IR) characterization revealed that the active group of the catalyst is -OH except for NiAl layered double oxide (LDO), which has the metal oxide-like functional groups. X-ray diffraction patterns expressed a typical layered material structure of NiAl LDH dan NiAl LDH-BPE, but not for NiAl LDO and NiAl LDO-BPE. Introducing BPE into NiAl LDH and NiAl LDO effectively decreased the bandgap energy and changed the surface morphology. The prepared catalysts were applied in a batch system with pH 5 to degrade tetracycline (TC). NiAl LDO demonstrated the highest activity as a catalyst in TC degradation, with a 93.61% degradation rate. In contrast, NiAl LDO-BPE demonstrated the highest structural stability in TC degradation and repeated use, with an initial degradation percentage of 82.58% and a fifth regeneration percentage of 71.4%.

Tailoring functional two-dimensional nanohybrids: A comprehensive approach for enhancing photocatalytic remediation

Photocatalysis is gaining prominence as a viable alternative to conventional biohazard treatment technologies. Two-dimensional (2D) nanomaterials have become crucial for fabricating novel photocatalysts due to their nanosheet architectures, large surface areas, and remarkable physicochemical properties. Furthermore, a variety of applications are possible with 2D nanomaterials, either in combination with other functional nanoparticles or by utilizing their inherent properties. Henceforth, the review commences its exploration into the synthesis of these materials, delving into their inherent properties and assessing their biocompatibility. Subsequently, an overview of mechanisms involved in the photocatalytic degradation of pollutants and the processes related to antimicrobial action is presented. As an integral part of our review, we conduct a systematic analysis of existing challenges and various types of 2D nanohybrid materials tailored for applications in the photocatalytic degradation of contaminants and the inactivation of pathogens through photocatalysis. This investigation will aid to contribute to the formulation of decision-making criteria and design principles for the next generation of 2D nanohybrid materials. Additionally, it is crucial to emphasize that further research is imperative for advancing our understanding of 2D nanohybrid materials.

Development of biohybrid Ag2CrO4/rGO based nanocomposites with stable flotation properties as enhanced Photocatalyst for sewage treatment and antibiotic-conjugated for antibacterial evaluation

The proposed research outlines a facile method to synthesize Silver Chromate/reduced graphene oxide nanocomposites (Ag₂CrO₄/rGO NCs) with a narrow dissemination size for the ecological treatment of hazardous organic dyes. The photodegradation performance toward the decontamination of model artificial methylene blue dye was assessed under solar light irradiation. The crystallinity, particle size, recombination of photogenerated charge carriers, energy gap and surface morphologies of synthesized nanocomposites were determined. The experiment objective is to use rGO nanocomposites to increase Ag₂CrO₄ photocatalytic efficiency in the solar spectrum. Tauc plots of ultraviolet-visible (UV-vis) spectrum were used to calculate the optical bandgap energy of the produced nanocomposites ~1.52 eV, which resulted in a good photodegradation percentage of ~92 % after 60 min irradiation of Solar light. At the same time, pure Ag₂CrO₄ and rGO nanomaterials showed ~46 % and ~ 30 %, respectively. The ideal circumstances were discovered by investigating the effects of several parameters, including catalyst loading and different pH levels, on the degradation of dyes. However, the final composites maintain their ability to degrade for up to five cycles. According to the investigations, Ag₂CrO₄/rGO NCs are an effective photocatalyst and can be used as the ideal material to prevent water pollution. Furthermore, antibacterial efficacy for the hydrothermally synthesized nanocomposite was tested against gram-positive (+ve) bacteria viz. Staphylococcus aureus and gram-negative (-ve) bacteria viz. Escherichia coli. The maximum zone of inhibition for S. aureus and E. coli were 18.5 and 17 mm, respectively.

Chitosan-Grafted Carbon Oxynitride Nanoparticles: Investigation of Photocatalytic Degradation and Antibacterial Activity

In this work, a series of chitosan (CS)-grafted carbon oxynitride (OCN) nanoparticles (denoted as CS-OCN) were successfully synthesized for the first time by thermal polycondensation and subsequent esterification. The structure and photocatalytic performance of CS-OCN nanoparticles were investigated. The XPS spectra of CS-OCN-3 showed the presence of amino bonds. The optimal photocatalytic degradation efficiency of the synthesized CS-OCN-3 could reach 94.3% within 390 min, while the photocurrent response intensity was about 150% more than that of pure OCN. The improved photocatalytic performance may be mainly attributed to the enhanced photogenerated carrier’s separation and transportation and stronger visible light response after CS grafting. In addition, the inhibition diameter of CS-OCN-3 reached 23 mm against E. coli within 24 h under visible light irradiation, exhibiting excellent photocatalytic bactericidal ability. The results of bacterial inhibition were supported by absorbance measurements (OD600) studies of E. coli. In a word, this work provided a rational design of an efficient novel metal-free photocatalyst to remove bacterial contamination and accelerate the degradation of organic dyes.

Construction of novel g-C3N4 coupled efficient Bi2O3 nanoparticles for improved Z-scheme photocatalytic removal of environmental wastewater contaminant: Insight mechanism

Recently, the major environmental pollution produced by the release of wastewater in liquid type is one of the most extensive forms of foremost pollution in water ecosystems. In this article, the Bi₂O₃/g-C₃N₄ nanocomposite with a direct Z-scheme was effectively obtained by a facile hydrothermal system. The crystal structures, surface morphology, chemical composition, and the optical belongings of the as-obtained composite catalysts were examined by Power XRD, FT-IR spectra, High-resolution XPS spectra, FE-SEM images with EDX spectra, High-resolution TEM images, UV-Vis DRS, and PL spectra respectively. Furthermore, the photocatalytic performance was assessed by the degradation of aqueous Rhodamine B (Rh B) dye under visible-light exposure. The Bi₂O₃/g-C₃N₄ composite photocatalysts (PCs) showed the maximum photo-degradation efficiency through a rate constant value of 0.0149 min^-1, which is 4.9 and 5.3 folds superior to Bi₂O₃, and GCN, respectively. The better GBO2 nanocomposite PCs showed a superior photocatalytic degradation performance (>82%) of aqueous Rh B dye after five successive recycles. Moreover, based on these outcomes of the radical scavenging test, a direct and effective Z-scheme photocatalytic charger transfer mechanism was also projected. Finally, the reusability of the as-obtained Bi₂O₃/g-C₃N₄ nanocomposite has better stability and reusability, which was a favourable applicant for wastewater handling.

Nanotextured CeO2-SnO2 Composite: Efficient Photocatalytic, Antibacterial, and Energy Storage Fibers

Bacterial infections remain a serious and pervasive threat to human health. Bacterial antibiotic resistance, in particular, lowers treatment efficacy and increases mortality. The development of nanomaterials has made it possible to address issues in the biomedical, energy storage, and environmental fields. This paper reports the successful synthesis of CeO₂-SnO₂ composite nanofibers via an electrospinning method using polyacrylonitrile polymer. Scanning and transmission electron microscopy assessments showed that the average diameter of CeO₂-SnO₂ nanofibers was 170 nm. The result of photocatalytic degradation for methylene blue dye displayed enhanced efficiency of the CeO₂-SnO₂ composite. The addition of SnO₂ to CeO₂ resulted in the enhancement of the light absorption property and enriched charge transmission of photoinduced electron-hole duos, which conspicuously contributed to momentous photoactivity augmentation. Composite nanofibers exhibited higher specific capacitance which may be accredited to the synergism between CeO₂ and SnO₂ particles in nanofibers. Furthermore, antibacterial activity was screened against Escherichia coli and CeO₂-SnO₂ composite nanofibers depicted excellent activity. The findings of this work point to new possibilities as an electrode material in energy storage systems and as a visible-light-active photocatalyst for the purification of chemical and biological contaminants, which would substantially benefit environmental remediation processes.

Hierarchical Ultrathin Layered GO-ZnO@CeO2 Nanohybrids for Highly Efficient Methylene Blue Dye Degradation

Highly efficient interfacial contact between components in nanohybrids is a key to achieving great photocatalytic activity in photocatalysts and degradation of organic model pollutants under visible light irradiation. Herein, we report the synthesis of nano-assembly of graphene oxide, zinc oxide and cerium oxide (GO-ZnO@CeO₂) nanohybrids constructed by the hydrothermal method and subsequently annealed at 300 °C for 4 h. The unique graphene oxide sheets, which are anchored with semiconducting materials (ZnO and CeO₂ nanoparticles), act with a significant role in realizing sufficient interfacial contact in the new GO-ZnO@CeO₂ nanohybrids. Consequently, the nano-assembled structure of GO-ZnO@CeO₂ exhibits a greater level (96.66%) of MB dye degradation activity than GO-ZnO nanostructures and CeO₂ nanoparticles on their own. This is due to the thin layers of GO-ZnO@CeO₂ nanohybrids with interfacial contact, suitable band-gap matching and high surface area, preferred for the improvement of photocatalytic performance. Furthermore, this work offers a facile building and cost-effective construction strategy to synthesize the GO-ZnO@CeO₂ nanocatalyst for photocatalytic degradation of organic pollutants with long-term stability and higher efficiency.

A review on current progress of graphene-based ternary nanocomposites in the removal of anionic and cationic inorganic pollutants

The current review aims to summarize the ongoing advances in high-performing graphene-based ternary nanocomposites for removing cationic and anionic inorganic pollutants. Graphene derivatives are extensively utilized for the development of composites due to their high synergism with co-functional materials, rational design, flexible surface chemistry, high mobile charge carriers, improved binding properties, and many more. The past ten years have witnessed progressive research on graphene-based ternary nanocomposites in a multitude of pollution remediation applications. Therefore, the focus falls on understanding how these ternary nanocomposites are tailored to capture the inorganic cationic and anionic contaminants with particular emphasis on graphene derivatives as base matrix and filler. The review investigates the synthesis, categorization, and characterization techniques of graphene-based ternary composites. Besides, the study broadens the understanding of the binding mechanism of the pollutants onto graphene ternary composites. The review also assesses the separation and recycling efficacy of the composites in detail. The future prospects in improving the practical application of the ternary systems also have been discussed. The comprehensive review on graphene based ternary systems detailing their structural and functional aspects, as well as their performance as inorganic decontaminants can provide deep insights for researchers in improvising wastewater treatment technologies.

Mechanical Response of Glass-Epoxy Composites with Graphene Oxide Nanoparticles

Graphene-based fillers possess exceptional properties that encourage researchers toward their incorporation in glass-epoxy (GE) polymer composites. Regarding the mechanical and wear properties of glass-epoxy composites, the effect of graphene oxide (GO) reinforced in glass-epoxy was examined. A decrease in tensile modulus and increase in tensile strength was reported for 1 wt. % of GO. A shift in glass transition temperature T_g was observed with the addition of GO. The cross-link density and storage modulus of the composite decreased with the addition of GO. The decrease in dissipation energy and wear rate was reported with the increase in GO concentration. A simple one-dimensional damage model of nonlinear nature was developed to capture the stress-strain behavior of the unfilled and filled glass-epoxy composite. Tensile modulus E, Weibull scale parameter σ_o, and Weibull shape parameter β were considered to develop the model. Finally, to understand the failure mechanisms in GO-filled composites, a scanning electron microscopic (SEM) examination was carried out for tensile fractured composites.

Assessment of the Synergetic Performance of Nanostructured CeO2-SnO2/Al2O3 Mixed Oxides on Automobile Exhaust Control

In order to control diesel exhaust emission, CeO₂-SnO₂/Al₂O₃ (CTA) mixed oxides were prepared and coated on perforated stainless steel (SS) filter plates, and the catalytic activities were analyzed in this work. The CeO₂-SnO₂ (different compositions of Ce/Sn-2:8; 1:1; 8:2) composites and Al₂O₃ were prepared separately via a co-precipitation approach, and CeO₂-SnO₂/Al₂O₃ (CTA) mixed oxides were attained by mechanical mixing of 75 wt% CeO₂-SnO₂ composites with 25 wt% Al₂O₃. X-ray diffraction (XRD) and Raman spectroscopy were performed for all three CeO₂-SnO₂/Al₂O₃ (CTA) mixed oxides; the CeO₂-SnO₂/Al₂O₃ (Ce/Sn-1:1) sample confirmed the presence of cubic and tetragonal mixed faces, which enhances the redox nature (catalytic activities). Various characterizations such as high-resolution transmission electron microscopy (HRTEM), Brunauer-Emmett-Teller (BET) analysis, X-ray photoelectron spectroscopy (XPS), and a scanning electron microscope (SEM) were employed on CeO₂-SnO₂/Al₂O₃ (Ce/Sn-1:1) sample to investigate the structural, textural, compositional, and morphological properties. The CeO₂-SnO₂/Al₂O₃ (Ce/Sn-1:1) sample was coated on a perforated stainless steel (SS) filter plate via a simple, cost-effective, and novel method, and an exhaust emission test for various compression ratios (CR), injection pressure (IP), and load (L) was completed using an AVL Digas analyzer. The CeO₂-SnO₂/Al₂O₃ (Ce/Sn-1:1) sample, with a size of 10.22 nm and a high surface area of about 73 m² g^-1, exhibit appreciable catalytic properties.

Efficient One-Pot Synthesis of TiO2/ZrO2/SiO2 Ternary Nanocomposites Using Prunus × Yedoensis Leaf Extract for Enhanced Photocatalytic Dye Degradation

A simple, efficient, and ecofriendly method was employed to synthesize TiO2/ZrO2/SiO2 ternary nanocomposites using Prunus × yedoensis leaf extract (PYLE) that shows improved photocatalytic and antibacterial properties. The characterization of the obtained nanocomposites was done by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, field-emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray spectroscopic (EDS) analysis. The synthesized ternary nanocomposites with nanoscale pore diameters were investigated for the elimination of Reactive Red 120 (RR120) dye. The obtained results showed about 96.2% removal of RR120 dye from aqueous solution under sunlight irradiation. Furthermore, it shows promising antibacterial activity against Staphylococcus aureus and Escherichia coli. The improved photocatalytic and antibacterial activity of TiO2/ZrO2/SiO2 may bring unique insights into the production of ternary nanocomposites and their applications in the environment and biomedical field.

Green-Routed Carbon Dot-Adorned Silver Nanoparticles for the Catalytic Degradation of Organic Dyes

Herein, a simple, cost-effective, and in-situ environmentally friendly approach was adopted to synthesize carbon dot-adorned silver nanoparticles (CDs@AgNPs) from yellow myrobalan (Terminalia chebula) fruit using a hydrothermal treatment without any additional reducing and or stabilizing agents. The as-synthesized CDs@AgNP composite was systematically characterized using multiple analytical techniques: FESEM, TEM, XRD, Raman, ATR-FTIR, XPS, and UV-vis spectroscopy. All the results of the characterization techniques strongly support the idea that the CDs were successfully made to adorn the AgNPs. This effectively synthesized CDs@AgNP composite was applied as a catalyst for the degradation of organic dyes, including methylene blue (MB) and methyl orange (MO). The degradation results revealed that CDs@AgNPs exhibit a superior catalytic activity in the degradation of MB and MO in the presence of NaBH4 (SB) under ambient temperatures. In total, 99.5 and 99.0% rates of degradation of MB and MO were observed using CDs@AgNP composite with SB, respectively. A plausible mechanism for the reductive degradation of MB and MO is discussed in detail. Moreover, the CDs@AgNP composite has great potential for wastewater treatment applications.

An efficient optical properties of Sn doped ZnO/CdS based solar light driven nanocomposites for enhanced photocatalytic degradation applications

Metal sulfide - semiconductor nanocomposites synthesized with well-defined tin metal, exhibited the wide bandgap, the absorptions are limited to the UV-vis region for reduction of Reactive Blue 160 (RB 160) under solar light irradiation. The prepared samples were characterized using optoelectronic techniques. Conveniently, a wider range of wavelengths and physical properties can be enabled by doping these metal oxide nanoparticles. Whereas the photoreduction of RB 160 is unambiguously associated within charge separation and transmission progression from the excited Sn doped ZnO/CdS. Furthermore, Photocatalytic degradation efficiency for the Sn doped ZnO/CdS composites still reliant on the excitation strength, indicating the several electrons and protons were precise as a result of charge separation and transmission in prepared catalyst. Sn doped ZnO/CdS composites shows 94% Photocatalytic degradation efficiency within 120 min under sunlight irradiation. This photocatalytic nanocomposites may find capable applications in solar cells to power stretchable and also in wearable electronics.

Highly efficient surface sequestration of Pb2+ and Cr3+ from water using a Mn3O4 anchored reduced graphene oxide: Selective removal of Pb2+ from real water

Owing to the ubiquitous existence of detrimental heavy metals in the environment, simple adsorption-oriented approaches are becoming increasingly appealing for the effective removal of Pb²⁺ and Cr³⁺ from water bodies. These techniques use nanocomposites (NC) of reduced graphene oxide (rGO) and Mn₃O₄ (rGO-Mn₃O₄), they employ a hydrothermal technique featuring NaBH₄ and NaOH solutions. Here, spectroscopic and microscopic instrumental techniques were used to evaluate the morphological and physicochemical characteristics of prepared reduced graphene oxide manganese oxide (rGO-Mn₃O₄), revealing that it possessed a well-defined porous structure with a specific surface area of 126 m² g^-1. The prepared rGO-Mn₃O₄ had significant adsorption efficiencies for Pb²⁺ and Cr³⁺, achieving maximum sequestration capacities of 130.28 and 138.51 mg g^-1 for Pb²⁺ and Cr³⁺, respectively, according to the Langmuir model. These adsorption capacities are comparable to or greater than those of previously reported graphene-based materials. The Langmuir isotherm and pseudo-second-order models adequately represented the experimental results. Thermodynamic analysis revealed that adsorption occurred through spontaneous endothermic reactions. Recycling studies showed that the developed r-GO-Mn₃O₄ had excellent recyclability, with <70% removal at the 5th cycle; its feasibility was evaluated using industrial wastewater, suggesting that Pb²⁺ was selectively removed from Pb²⁺ and Cr³⁺ contaminated water. The instrumental analysis and surface phenomena studies presented here revealed that the adsorptive removal processes of both heavy metals involved π electron donor-acceptor interactions, ion exchange, and electrostatic interactions, along with surface complexation. Overall, the developed rGO-Mn₃O₄ has the potential to be a high-value adsorbent for removing heavy metals.

One-Pot Synthesis of SnO2-rGO Nanocomposite for Enhanced Photocatalytic and Anticancer Activity

Metal oxide and graphene derivative-based nanocomposites (NCs) are attractive to the fields of environmental remediation, optics, and cancer therapy owing to their remarkable physicochemical characteristics. There is limited information on the environmental and biomedical applications of tin oxide-reduced graphene oxide nanocomposites (SnO₂-rGO NCs). The goal of this work was to explore the photocatalytic activity and anticancer efficacy of SnO₂-rGO NCs. Pure SnO₂ NPs and SnO₂-rGO NCs were prepared using the one-pot hydrothermal method. X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR), UV–Vis spectrometry, photoluminescence (PL), and Raman scattering microscopy were applied to characterize the synthesized samples. The crystallite size of the SnO₂ NPs slightly increased after rGO doping. TEM and SEM images show that the SnO₂ NPs were tightly anchored onto the rGO sheets. The XPS and EDX data confirmed the chemical state and elemental composition of the SnO₂-rGO NCs. Optical data suggest that the bandgap energy of the SnO₂-rGO NCs was slightly lower than for the pure SnO₂ NPs. In comparison to pure SnO₂ NPs, the intensity of the PL spectra of the SnO₂-rGO NCs was lower, indicating the decrement of the recombination rate of the surfaces charges (e⁻/h⁺) after rGO doping. Hence, the degradation efficiency of methylene blue (MB) dye by SnO₂-rGO NCs (93%) was almost 2-fold higher than for pure SnO₂ NPs (54%). The anticancer efficacy of SnO₂-rGO NCs was also almost 1.5-fold higher against human liver cancer (HepG2) and human lung cancer (A549) cells compared to the SnO₂ NPs. This study suggests a unique method to improve the photocatalytic activity and anticancer efficacy of SnO₂ NPs by fusion with graphene derivatives.

Tin oxide based nanostructured materials: synthesis and potential applications

In view of their inimitable characteristics and properties, SnO₂ nanomaterials and nanocomposites have been used not only in the field of diverse advanced catalytic technologies and sensors but also in the field of energy storage such as lithium-ion batteries and supercapacitors, and in the field of energy production such as solar cells and water splitting. This review discusses the various synthesis techniques such as traditional methods, including processes like thermal decomposition, chemical vapor deposition, electrospinning, sol-gel, hydrothermal, solvothermal, and template-mediated methods and green methods, which include synthesis through plant-mediated, microbe-mediated, and biomolecule-mediated processes. Moreover, the advantages and limitations of these synthesis procedures and how to overcome them that would lead to future research are also discussed. This literature also focuses on various applications such as environmental remediation, energy production, energy storage, and removal of biological contaminants. Therefore, the rise and journey of SnO₂-based nanocomposites will motivate the modern generation of chemists to modify and design robust nanoparticles and nanocomposites that can effectively tackle significant environmental challenges. This overview concludes by providing future perspectives on research into tin oxide in synthesis and its various applications.

Simultaneous removal of heavy metal ions using carbon dots-doped hydrogel particles

Heavy metal ions (HMI) have attracted worldwide concern due to their serious environmental pollution which led to the risk of health conditions. From Red Malus floribunda fruits, nitrogen-doped carbon dots (N-CDs) were prepared, followed by hybrid-spherical shaped hydrogel particles (CGCDs) were prepared. The prepared CGCDs were utilized as adsorbents for HMI-(Hg(II), Cd(II), Pb(II), and Cr(III)) from water. N-CDs with about 4.0 nm in diameter were characterized by various techniques such as field emission-scanning electron microscopy (FE-SEM) and attenuated total reflection-fourier transform infrared spectroscopy (ATR-FTIR) that confirm the presence of nitrogen, oxygen, and carbon functionalities. The prepared spherical CGCDs were characterized very well before it was used as HMI adsorbents. The sizes of the CGCDs were ranges between 20 and 300 μm and the degree of swelling was calculated as 1320 %. ATR-FTIR and X-ray diffraction analyses reveal the presence of N-CDs in CGCDs. Further, FE-SEM confirms the spherical shape morphology of CGCDs. Three different concentrations of HMI solutions were 500 mg/L, 1000 mg/L, and 1500 mg/L. Hg(II) adsorbed proficiently by CGCDs in single metal ion systems with ~72 % and almost complete removal of Hg(II) ions (99 %) in multiple metal ion systems was observed. Moreover, all metal ions Hg(II), Cd(II), Pb(II), and Cr(III) were efficiently (>70 %) removed in multiple systems by CGCDs. After HMI adsorption experiments, the elemental mapping from FE-SEM and X-ray photoelectron spectroscopy studies conveys the presence of HMI on CGCDs. This suggests that CGCDs would be a suitable adsorbent for the simultaneous removal of multiple HMI from wastewater.

Visible-Light-Active CuO x -Loaded Mo-BiVO4 Photocatalyst for Inactivation of Harmful Bacteria (Escherichia coli and Staphylococcus aureus) and Degradation of Orange II Dye

In the present study, Mo-BiVO4-loaded and metal oxide (MO: Ag2Ox, CoOx, and CuOx)-loaded Mo-BiVO4 photocatalysts were synthesized using a wet impregnation method and applied for microbial inactivation (Escherichia coli and Staphylococcus aureus) and orange II dye degradation under visible-light (VL) conditions (λ ≥ 420 nm). The amount of MO cocatalysts loaded onto the surface of the Mo-BiVO4 photocatalysts was effectively controlled by varying their weight percentages (i.e., 1-3 wt %). Among the pure Mo-BiVO4, Ag2Ox-, CoOx-, and CuOx-loaded Mo-BiVO4 photocatalysts used in bacterial E. coli and S. aureus inactivation under VL irradiation, the 2 wt % CuOx-loaded Mo-BiVO4 photocatalyst showed the highest degradation efficiency of E. coli (97%) and S. aureus (99%). Additionally, the maximum orange II dye degradation efficiency (80.2%) was achieved over the CuOx (2 wt %)-loaded Mo-BiVO4 photocatalysts after 5 h of radiation. The bacterial inactivation results also suggested that the CuO x -loaded Mo-BiVO4 nanostructure has significantly improved antimicrobial ability as compared to CuOx/BiVO4. The enhancement of the inactivation performance of CuOx-loaded Mo-BiVO4 can be attributed to the synergistic effect of Mo doping and Cu2+ ions in CuOx, which further acted as an electron trap on the surface of Mo-BiVO4 and promoted fast transfer and separation of the photoelectron (e-)/hole (h+) pairs for growth of reactive oxygen species (ROS). Furthermore, during the bacterial inactivation process, the ROS can disrupt the plasma membrane and destroy metabolic pathways, leading to bacterial cell death. Therefore, we provide a novel idea for visible-light-activated photocatalytic antibacterial approach for future disinfection applications.

Three-dimensional porous MoS2 nanobox embedded g-C3N4@TiO2 architecture for highly efficient photocatalytic degradation of organic pollutant

Herein, a simple, highly efficient and stable MoS₂ nanobox embedded graphitic-C₃N₄@TiO₂ (g-CN@TiO₂) nanoarchitecture was synthesized by a facile solvothermal approach. The nano-hybrid photocatalyst was constructed by TiO₂ nanoparticles anchored on the surface of g-CN nanosheets. Then highly crystalline three-dimensional porous MoS₂ nanobox was homogeneously distributed on the g-CN@TiO₂ surface. The g-CN@TiO₂/MoS₂ hybrid achieved a high photocatalytic degradation efficiency of 97.5% for methylene blue (MB) dye pollutant under visible-light irradiant in an hour which was much better than TiO₂@MoS_2, g-CN@TiO_2, MoS_2, TiO₂ and g-CN. Furthermore, the reaction rate (k) value of g-CN@TiO₂/MoS₂ for MB dye is as high as 3.18 X 10^-2 min^-1, which is ~ 2.65 times better than those of g-CN@TiO₂ and MoS₂. This work presents a rational structure design, interfacial construction and suitable band gap strategy to synthesize advanced nano-hybrid photocatalyst for degradation of organic pollutant with excellent performance and long-term stability.

Removal of mercury ions from aqueous by functionalized LUS-1 with Bis [3-(triethoxysilyl) propyl] tetrasulfide as an effective nanocomposite using response surface methodology (RSM)

In this study, LUS-1, as a mesoporous silica material, was functionalized using sulfur-containing ligand (Bis [3-(triethoxysilyl) propyl] tetrasulfide, TESPT) and used for mercury removal from the aqueous solution. Different characterizations such as N₂ adsorption-desorption (BET), TGA, XRD, FT-IR, and SEM were used to verify the nanocomposite synthesis. In addition, the effects of several independent parameters like pH, the contact time of reaction, and adsorbent dose on the removal efficiency of mercury from aqueous in a batch system were studied using response surface methodology (RSM). Based on the results and after both theoretical and experimental studies, the optimum conditions using the LUS-1-TESPT were contact time of reaction of 23.16 min, sorbent dose of 51.12 mg, and pH of 4.5. The kinetic and isotherm models for the adsorption process showed a maximum adsorption capacity of adsorbent which was 136.73 mg g^-1 with 99% removal of Hg(II) via the Langmuir model. Meanwhile, the sorbent's reusability and efficiency verified that the sorbent could be used five times after recovery with 99% efficiency.

Facile synthesis of a heterostructured lanthanum-doped SnO2 anchored with rGO for asymmetric supercapacitors and photocatalytic dye degradation

Owing to its good redox properties, excellent electron–hole pair generation, wide band gap and outstanding chemical stability, SnO2 has been considered as a promising bifunctional material for supercapacitors as well as photocatalysts, but its poor conductivity and low surface area limit the specific capacitance and catalytic efficiency.

Facile one pot microwave-assisted green synthesis of Fe2O3/Ag nanocomposites by phytoreduction: Potential application as sunlight-driven photocatalyst, antibacterial and anticancer agent

Herein, we report a one-pot microwave assisted method to prepare an efficient Fe₂O₃/Ag nanocomposites (NCs) using Aloe vera (A. vera) gel extract as a mild, safe, renewable and active stabilizer without any harmful reagent. The advanced characterization techniques including XRD, FT-IR, UV-DRS, PL, TGA, SEM-EDX, TEM, DLS, Elemental mapping, VSM and BET were applied to analyze the morphology and structure of the prepared Fe₂O₃/Ag NCs. The results exhibited that the Fe₂O₃/Ag NCs was successfully synthesized by greener route. Furthermore, these bio-reduced Fe₂O₃/Ag NCs was tested for its catalytic degradation toward methylene blue (MB) as a model contaminant and exhibited outstanding photocatalytic degradation efficiency with 88.2% removal rate in 140 min. It was worth pointing out that the Fe₂O₃/Ag nanoparticles facilitated the charge transportation and inhibit the charge recombination of an electron in the conduction band. Additionally, the prepared Fe₂O₃/Ag NCs was studied for their in-vitro antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) bacteria and anticancer properties against A549 cell lines (human lung cancer). The biological results of this study demonstrated that A. vera gel extract derived Fe₂O₃/Ag NCs showed significant inhibition properties against bacterial strains and also capable of achieving superior action against A549 cancer cell lines.

Eco-friendly Synthesis of CRGO and CRGO/SnO2 Nanocomposite for Photocatalytic Degradation of Methylene Green Dye

Reduced graphene oxide (rGO) was synthesized from a simple, cost-effective, and eco-friendly method by using Capsicum annuum (CA) as reducing agent. The rGO was mixed with SnO₂ to synthesize a nanocomposite. The synthesized materials were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and UV-visible spectroscopy techniques. The SnO₂-C. annuum reduced graphene oxide (CRGO) nanocomposite exhibited a photodegradation efficiency of 97.4% when employed to remove methylene green (MG) dye. The synthesized nanocomposite showed improved photodegradation ability due to its high charge transfer and separation and owing to the presence of the large surface area of the CRGO network system. Degraded water was used in the plant and animal survival study, in which the dye solution treated with CRGO nanocomposite exhibited better growth compared to that of untreated MG solution. Likewise, in the ecotoxicity study, Artemia salina and zebra fish (Danio rerio) survival was found to be enhanced with CRGO nanocomposite-treated dye solution. This finding supports the effectiveness of CRGO/SnO₂ nanocomposite for the treatment of MG dye-contaminated effluent samples.

Insights into the rapid elimination of antibiotics from aqueous media by tunable C3N4 photocatalysts: Effects of dopant amount, co-existing ions and reactive oxygen species

Conventional photocatalytic nanomaterials are not environmentally sustainable since these are usually produced from scarce mineral and metal precursors. Moreover, high pollutant removal efficiencies by conventional photocatalysts are only attained after several hours of reaction with light. In this study, novel visible light-active photocatalysts were synthesized from environment-friendly carbon precursors and applied for the rapid degradation of sulfamethoxazole (SMX) in aqueous solutions. The photocatalysts were prepared via the co-pyrolysis of urea with varying doping temperature and dopant amount. These variations played a vital role in improving the performance of the photocatalysts and resulted in up to >99% SMX removal within 45 min of visible light irradiation. Characterization of the photocatalysts showed that potassium and iodine dopants were responsible in the red shift and broadening of the light absorption spectrum to the visible region. In addition, the band gap energy narrowed by 0.23 eV resulting in faster charge transfer but slower recombination of the photo-generated electron and hole pairs. Effects of varying concentrations of inorganic salts (NO₃^-, SO₄^2-, Cl^-, PO₄^3-) on SMX removal were also examined. Lastly, the mechanism of SMX photodegradation was elucidated.

The Roles of Nanomaterials in Conventional and Emerging Technologies for Heavy Metal Removal: A State-of-the-Art Review

Heavy metal (HM) pollution in waterways is a serious threat towards global water security, as high dosages of HM poisoning can significantly harm all living organisms. Researchers have developed promising methods to isolate, separate, or reduce these HMs from water bodies to overcome this. This includes techniques, such as adsorption, photocatalysis, and membrane removal. Nanomaterials play an integral role in all of these remediation techniques. Nanomaterials of different shapes have been atomically designed via various synthesis techniques, such as hydrothermal, wet chemical synthesis, and so on to develop unique nanomaterials with exceptional properties, including high surface area and porosity, modified surface charge, increment in active sites, enhanced photocatalytic efficiency, and improved HM removal selectivity. In this work, a comprehensive review on the role that nanomaterials play in removing HM from waterways. The unique characteristics of the nanomaterials, synthesis technique, and removal principles are presented. A detailed visualisation of HM removal performances and the mechanisms behind this improvement is also detailed. Finally, the future directions for the development of nanomaterials are highlighted.

Highly effective photocatalytic performance of {001}-TiO2/MoS2/RGO hybrid heterostructures for the reduction of Rh B

Effective separation and rapid transfer of photogenerated electron–hole pairs are key features of photocatalytic materials with high catalytic activity, which could be achieved by co-catalysts.

Development of Fe/Nb-based solar photocatalysts for water treatment: impact of different synthesis routes on materials properties

Semiconductors based on Fe/Nb oxides can present both solar sensitivity and high catalytic activity. However, there is still a lack regarding the comparison between different routes to produce Fe/Nb-based solar photocatalysts and the evaluation of the impact of the synthesis operating conditions on the material properties. In this work, Fe/Nb₂O₅ ratio, type of precipitating agent, presence/absence of washing stage, and temperature of calcination were verified to be the most relevant parameters in the synthesis by the co-precipitation method. These factors led to remarkable differences in the properties and performance of the photocatalysts produced by each distinct synthesis route. Composition, iron species present in the materials, crystallinity characteristics, and pH of the catalysts were affected, leading to different photocatalytic activities under UV-Vis light. Due to their characteristics, the synthesized materials are potential photocatalysts for application in solar processes. Graphical abstract ᅟ.