AFM of biological material embedded in epoxy resin

Photoinduced force microscopy as a novel method for the study of microbial nanostructures

A detailed comparison of the capabilities of electron microscopy and nano-infrared (IR) microscopy for imaging microbial nanostructures has been carried out for the first time. The surface sensitivity, chemical specificity, and non-destructive nature of spectroscopic mapping is shown to offer significant advantages over transmission electron microscopy (TEM) for the study of biological samples. As well as yielding important topographical information, the distribution of amides, lipids, and carbohydrates across cross-sections of bacterial (Escherichia coli, Staphylococcus aureus) and fungal (Candida albicans) cells was demonstrated using PiFM. The unique information derived from this new mode of spectroscopic mapping of the surface chemistry and biology of microbial cell walls and membranes, may provide new insights into fungal/bacterial cell function as well as having potential use in determining mechanisms of antimicrobial resistance, especially those targeting the cell wall.

Correlative Fluorescent Scanning Probe Nanotomography Used to Study the Intracellular Distribution of Doxorubicin in MCF-7 Human Breast Adenocarcinoma Cells

Developing technologies for efficient targeted drug delivery for oncotherapy requires new methods to analyze the features of micro- and nanoscale distributions of antitumor drugs in cells and tissues. A new approach to three-dimensional analysis of the intracellular distribution of cytostatics was developed using fluorescence scanning optical-probe nanotomography. A correlative analysis of the nanostructure and distribution of injected doxorubicin in MCF-7 human breast adenocarcinoma cells revealed the features of drug penetration and accumulation in the cell. The technology is based on the principles of scanning optical probe nanotomography and is applicable to studying the distribution patterns of various fluorescent or fluorescence-labelled substances in cells and tissues.

Numerical Analysis of the Light Modulation by the Frustule of Gomphonema parvulum: The Role of Integrated Optical Components

Siliceous diatom frustules present a huge variety of shapes and nanometric pore patterns. A better understanding of the light modulation by these frustules is required to determine whether or not they might have photobiological roles besides their possible utilization as building blocks in photonic applications. In this study, we propose a novel approach for analyzing the near-field light modulation by small pennate diatom frustules, utilizing the frustule of Gomphonema parvulum as a model. Numerical analysis was carried out for the wave propagation across selected 2D cross-sections in a statistically representative 3D model for the valve based on the finite element frequency domain method. The influences of light wavelength (vacuum wavelengths from 300 to 800 nm) and refractive index changes, as well as structural parameters, on the light modulation were investigated and compared to theoretical predictions when possible. The results showed complex interference patterns resulting from the overlay of different optical phenomena, which can be explained by the presence of a few integrated optical components in the valve. Moreover, studies on the complete frustule in an aqueous medium allow the discussion of its possible photobiological relevance. Furthermore, our results may enable the simple screening of unstudied pennate frustules for photonic applications.

Atomic Force Microscopy (AFM) on Biopolymers and Hydrogels for Biotechnological Applications-Possibilities and Limits

Atomic force microscopy (AFM) is one of the microscopic techniques with the highest lateral resolution. It can usually be applied in air or even in liquids, enabling the investigation of a broader range of samples than scanning electron microscopy (SEM), which is mostly performed in vacuum. Since it works by following the sample surface based on the force between the scanning tip and the sample, interactions have to be taken into account, making the AFM of irregular samples complicated, but on the other hand it allows measurements of more physical parameters than pure topography. This is especially important for biopolymers and hydrogels used in tissue engineering and other biotechnological applications, where elastic properties, surface charges and other parameters influence mammalian cell adhesion and growth as well as many other effects. This review gives an overview of AFM modes relevant for the investigations of biopolymers and hydrogels and shows several examples of recent applications, focusing on the polysaccharides chitosan, alginate, carrageenan and different hydrogels, but depicting also a broader spectrum of materials on which different AFM measurements are reported in the literature.

Easy ultrastructural insight into the internal morphology of biological specimens by Atomic Force Microscopy

As a topographical technique, Atomic Force Microscopy (AFM) needs to establish direct interactions between a given sample and the measurement probe in order to create imaging information. The elucidation of internal features of organisms, tissues and cells by AFM has therefore been a challenging process in the past. To overcome this hindrance, simple and fast embedding, sectioning and dehydration techniques are presented, allowing the easy access to the internal morphology of virtually any organism, tissue or cell by AFM. The study at hand shows the applicability of the proposed protocol to exemplary biological samples, the resolution currently allowed by the approach as well as advantages and shortcomings compared to classical ultrastructural microscopic techniques like electron microscopy. The presented cheap, facile, fast and non-toxic experimental protocol might introduce AFM as a universal tool for the elucidation of internal ultrastructural detail of virtually any given organism, tissue or cell.

Epidermal Cell Surface Structure and Chitin-Protein Co-assembly Determine Fiber Architecture in the Locust Cuticle

The geometrical similarity of helicoidal fiber arrangement in many biological fibrous extracellular matrices, such as bone, plant cell wall, or arthropod cuticle, to that of cholesteric liquid mesophases has led to the hypothesis that they may form passively through a mesophase precursor rather than by direct cellular control. In search of direct evidence to support or refute this hypothesis, here, we studied the process of cuticle formation in the tibia of the migratory locust, Locusta migratoria, where daily growth layers arise by the deposition of fiber arrangements alternating between unidirectional and helicoidal structures. Using focused ion beam/scanning electron microscopy (FIB/SEM) volume imaging and scanning X-ray scattering, we show that the epidermal cells determine an initial fiber orientation, from which the final architecture emerges by the self-organized co-assembly of chitin and proteins. Fiber orientation in the locust cuticle is therefore determined by both active and passive processes.

Caenorhabditis elegans revisited by atomic force microscopy - Ultra-structural changes of the cuticle, but not in the intestine after treatment with Combretum mucronatum extract

Assessing the internal morphology of Caenorhabditis elegans by a topographical technique like atomic force microscopy (AFM) is a challenging process. As a prerequisite for a successful image acquisition, direct contact between the structure of interest and the AFM probe needs to be established. To gain this insight into the morphology of cuticle and intestine in C. elegans before and after treatment with a tannin-enriched hydro-ethanolic extract from Combretum mucronatum, we developed an approach based on polyethylene glycol embedding, ultra-sectioning, de-embedding and hexamethyldisilazane-dehydration prior to measuring in ambient conditions by intermittent contact mode AFM. The used experimental protocol allowed a facile and fast insight into the ultrastructure of treated versus untreated C. elegans individuals, directly leading to the identification of treatment-associated morphological alterations in the cuticle but not the intestine of C. elegans. Additionally, the presented ultra-microtomy based protocol could allow future insight into virtually any tissue or organism by AFM.

Aziridine-based polyaddition, post-modification, and crosslinking: can aziridine rival epoxide in polymer chemistry?

Aziridine may help to solve the problems encountered in epoxide-based polymer technologies. This review focuses on recent achievements in aziridine-based polyaddition, post-modification, and cross-linking.

AFM assessing of nanomechanical fingerprints for cancer early diagnosis and classification: from single cell to tissue level

Cancer development and progression are closely associated with changes both in the mechano-cellular phenotype of cancer and stromal cells and in the extracellular matrix (ECM) structure, composition, and mechanics. In this paper, we review the use of atomic force microscopy (AFM) as a tool for assessing the nanomechanical fingerprints of solid tumors, so as to be potentially used as a diagnostic biomarker for more accurate identification and early cancer grading/classification. The development of such a methodology is expected to provide new insights and a novel approach for cancer diagnosis. We propose that AFM measurements could be employed to complement standard biopsy procedures, offering an objective, novel and quantitative diagnostic approach with the properties of a blind assay, allowing unbiased evaluation of the sample.

Visualization of internal in situ cell structure by atomic force microscopy

Light and electron microscopy have been used to study cell structure for many years, but atomic force microscopy is a more recent technique used to analyze cells, mainly due to the absence of techniques to prepare the samples. Isolated molecules or organelles, whole cells, and to a lesser extent in situ cell structure have been observed by different atomic force microscopy imaging modes. Here, we review efforts intended to analyze in situ the cell structures using approaches involving imaging of the surface of semithin sections of samples embedded in resin and sections prepared with an ultramicrotome. The results of such studies are discussed in relation to their implications to analyze the fine structure of organelles at the nanoscale in situ at enhanced resolution compared to light microscopy.

A Cryosectioning Technique for the Observation of Intracellular Structures and Immunocytochemistry of Tissues in Atomic Force Microscopy (AFM)

The use of cryosectioning facilitates the morphological analysis and immunocytochemistry of cells in tissues in atomic force microscopy (AFM). The cantilever can access all parts of a tissue sample in cryosections after the embedding medium (sucrose) has been replaced with phosphate-buffered saline (PBS), and this approach has enabled the production of a type of high-resolution image. The images resembled those obtained from freeze-etching replica electron microscopy (EM) rather than from thin-section EM. The AFM images showed disks stacked and enveloped by the cell membrane in rod photoreceptor outer segments (ROS) at EM resolution. In addition, ciliary necklaces on the surface of connecting cilium, three-dimensional architecture of synaptic ribbons, and the surface of the post-synaptic membrane facing the active site were revealed, which were not apparent using thin-section EM. AFM could depict the molecular binding of anti-opsin antibodies conjugated to a secondary fluorescent antibody bound to the disk membrane. The specific localization of the anti-opsin binding sites was verified through correlation with immunofluorescence signals in AFM combined with confocal fluorescence microscope. To prove reproducibility in other tissues besides retina, cryosectioning-AFM was also applied to elucidate molecular organization of sarcomere in a rabbit psoas muscle.

Investigation of resins suitable for the preparation of biological sample for 3-D electron microscopy

In the last two decades, the third-dimension has become a focus of attention in electron microscopy to better understand the interactions within subcellular compartments. Initially, transmission electron tomography (TEM tomography) was introduced to image the cell volume in semi-thin sections (∼ 500 nm). With the introduction of the focused ion beam scanning electron microscope, a new tool, FIB-SEM tomography, became available to image much larger volumes. During TEM tomography and FIB-SEM tomography, the resin section is exposed to a high electron/ion dose such that the stability of the resin embedded biological sample becomes an important issue. The shrinkage of a resin section in each dimension, especially in depth, is a well-known phenomenon. To ensure the dimensional integrity of the final volume of the cell, it is important to assess the properties of the different resins and determine the formulation which has the best stability in the electron/ion beam. Here, eight different resin formulations were examined. The effects of radiation damage were evaluated after different times of TEM irradiation. To get additional information on mass-loss and the physical properties of the resins (stiffness and adhesion), the topography of the irradiated areas was analysed with atomic force microscopy (AFM). Further, the behaviour of the resins was analysed after ion milling of the surface of the sample with different ion currents. In conclusion, two resin formulations, Hard Plus and the mixture of Durcupan/Epon, emerged that were considerably less affected and reasonably stable in the electron/ion beam and thus suitable for the 3-D investigation of biological samples.

Vaccinia virus mutations in the L4R gene encoding a virion structural protein produce abnormal mature particles lacking a nucleocapsid

Electron micrographs from the 1960s revealed the presence of an S-shaped tubular structure in the center of the vaccinia virion core. Recently, we showed that packaging of virus transcription enzymes is necessary for the formation of the tubular structure, suggesting that the structure is equivalent to a nucleocapsid. Based on this study and on what is known about nucleocapsids of other viruses, we hypothesized that in addition to transcription enzymes, the tubular structure also contains the viral DNA and a structural protein as a scaffold. The vaccinia virion structural protein L4 stands out as the best candidate for the role of a nucleocapsid structural protein because it is abundant, it is localized in the center of the virion core, and it binds DNA. In order to gain more insight into the structure and relevance of the nucleocapsid, we analyzed thermosensitive and inducible mutants in the L4R gene. Using a cryo-fixation method for electron microscopy (high-pressure freezing followed by freeze-substitution) to preserve labile structures like the nucleocapsid, we were able to demonstrate that in the absence of functional L4, mature particles with defective internal structures are produced under nonpermissive conditions. These particles do not contain a nucleocapsid. In addition, the core wall of these virions is abnormal. This suggests that the nucleocapsid interacts with the core wall and that the nucleocapsid structure might be more complex than originally assumed.

IMPORTANCE

The vaccinia virus nucleocapsid has been neglected since the 1960s due to a lack of electron microscopy techniques to preserve this labile structure. With the advent of cryo-fixation techniques, like high-pressure freezing/freeze-substitution, we are now able to consistently preserve and visualize the nucleocapsid. Because vaccinia virus early transcription is coupled to the viral core structure, detailing the structure of the nucleocapsid is indispensable for determining the mechanisms of vaccinia virus core-directed transcription. The present study represents our second attempt to understand the structure and biological significance of the nucleocapsid. We demonstrate the importance of the protein L4 for the formation of the nucleocapsid and reveal in addition that the nucleocapsid and the core wall may be associated, suggesting a higher level of complexity of the nucleocapsid than predicted. In addition, we prove the utility of high-pressure freezing in preserving the vaccinia virus nucleocapsid.

Thermotropic dynamic processes in multiphase polymer systems by (cryo-)AFM

The structural (volume and enthalpy) relaxation of polymers during physical aging has a great relevance in materials science and engineering as it significantly changes the long-term material performance. In this article, we propose a methodological approach of (cryo-)atomic force microscopy (AFM) monitoring of macromolecular rearrangements which accompany structural relaxation within bulk of the polymer during physical aging. In contrast to conventional spectroscopic, scattering and thermal analysis techniques, high resolution topographical/phase imaging of the bulk cross-section over a large period of time and within a wide range of temperatures (-120 °C to +20 °C) yields unique information about the evolution of the polymer ultrastructure as a function of time and temperature in situ.

Combined scanning probe nanotomography and optical microspectroscopy: a correlative technique for 3D characterization of nanomaterials

Combination of 3D structural analysis with optical characterization of the same sample area on the nanoscale is a highly demanded approach in nanophotonics, materials science, and quality control of nanomaterial. We have developed a correlative microscopy technique where the 3D structure of the sample is reconstructed on the nanoscale by means of a "slice-and-view" combination of ultramicrotomy and scanning probe microscopy (scanning probe nanotomography, SPNT), and its optical characteristics are analyzed using microspectroscopy. This approach has been used to determine the direct quantitative relationship of the 3D structural characteristics of nanovolumes of materials with their microscopic optical properties. This technique has been applied to 3D structural and optical characterization of a hybrid material consisting of cholesteric liquid crystals doped with fluorescent quantum dots (QDs) that can be used for photochemical patterning and image recording through the changes in the dissymmetry factor of the circular polarization of QD emission. The differences in the polarization images and fluorescent spectra of this hybrid material have proved to be correlated with the arrangement of the areas of homogeneous distribution and heterogeneous clustering of QDs. The reconstruction of the 3D nanostructure of the liquid crystal matrix in the areas of homogeneous QDs distribution has shown that QDs do not perturb the periodic planar texture of the cholesteric liquid crystal matrix, whereas QD clusters do perturb it. The combined microspectroscopy-nanotomography technique will be important for evaluating the effects of nanoparticles on the structural organization of organic and liquid crystal matrices and biomedical materials, as well as quality control of nanotechnology fabrication processes and products.

An analytical technique to extract surface information of negatively stained or heavy-metal shadowed organic materials within the TEM

Using a series of uranyl acetate stained or platinum-palladium shadowed organic samples, an empirical analytical method to extract surface information from energy-filtered transmission electron microscopy (EFTEM) images is described. The distribution of uranium or platinum-palladium atoms, which replicate the sample surface topography, have been mathematically extracted by dividing the image acquired in the valence bulk plasmon energy region (between 20 and 30 eV) by the image acquired at the carbon K ionization edge (between 284 and 300 eV). The resulting plasmon-to-carbon ratio (PCR) image may be interpreted as a precise metal replica of the sample surface. In contrast to conventional EFTEM elemental mapping, including an absolute quantification approach, this technique can be applied to 200-600 nm thick organic samples. A combination of conventional TEM and PCR imaging allows one to detect complementary transmission and topographical information with nanometer precision of the same area of carbon-based samples. The advantages and limitations of PCR imaging are highlighted.

Episcopic 3D Imaging Methods: Tools for Researching Gene Function

This work aims at describing episcopic 3D imaging methods and at discussing how these methods can contribute to researching the genetic mechanisms driving embryogenesis and tissue remodelling, and the genesis of pathologies. Several episcopic 3D imaging methods exist. The most advanced are capable of generating high-resolution volume data (voxel sizes from 0.5x0.5x1 µm upwards) of small to large embryos of model organisms and tissue samples. Beside anatomy and tissue architecture, gene expression and gene product patterns can be three dimensionally analyzed in their precise anatomical and histological context with the aid of whole mount in situ hybridization or whole mount immunohistochemical staining techniques. Episcopic 3D imaging techniques were and are employed for analyzing the precise morphological phenotype of experimentally malformed, randomly produced, or genetically engineered embryos of biomedical model organisms. It has been shown that episcopic 3D imaging also fits for describing the spatial distribution of genes and gene products during embryogenesis, and that it can be used for analyzing tissue samples of adult model animals and humans. The latter offers the possibility to use episcopic 3D imaging techniques for researching the causality and treatment of pathologies or for staging cancer. Such applications, however, are not yet routine and currently only preliminary results are available. We conclude that, although episcopic 3D imaging is in its very beginnings, it represents an upcoming methodology, which in short terms will become an indispensable tool for researching the genetic regulation of embryo development as well as the genesis of malformations and diseases.

Tissue section AFM: In situ ultrastructural imaging of native biomolecules

Conventional approaches for ultrastructural high-resolution imaging of biological specimens induce profound changes in bio-molecular structures. By combining tissue cryo-sectioning with non-destructive atomic force microscopy (AFM) imaging we have developed a methodology that may be applied by the non-specialist to both preserve and visualize bio-molecular structures (in particular extracellular matrix assemblies) in situ. This tissue section AFM technique is capable of: i) resolving nm-microm scale features of intra- and extracellular structures in tissue cryo-sections; ii) imaging the same tissue region before and after experimental interventions; iii) combining ultrastructural imaging with complimentary microscopical and micromechanical methods. Here, we employ this technique to: i) visualize the macro-molecular structures of unstained and unfixed fibrillar collagens (in skin, cartilage and intervertebral disc), elastic fibres (in aorta and lung), desmosomes (in nasal epithelium) and mitochondria (in heart); ii) quantify the ultrastructural effects of sequential collagenase digestion on a single elastic fibre; iii) correlate optical (auto fluorescent) with ultrastructural (AFM) images of aortic elastic lamellae.

Towards native-state imaging in biological context in the electron microscope

Modern cell biology is reliant on light and fluorescence microscopy for analysis of cells, tissues and protein localisation. However, these powerful techniques are ultimately limited in resolution by the wavelength of light. Electron microscopes offer much greater resolution due to the shorter effective wavelength of electrons, allowing direct imaging of sub-cellular architecture. The harsh environment of the electron microscope chamber and the properties of the electron beam have led to complex chemical and mechanical preparation techniques, which distance biological samples from their native state and complicate data interpretation. Here we describe recent advances in sample preparation and instrumentation, which push the boundaries of high-resolution imaging. Cryopreparation, cryoelectron microscopy and environmental scanning electron microscopy strive to image samples in near native state. Advances in correlative microscopy and markers enable high-resolution localisation of proteins. Innovation in microscope design has pushed the boundaries of resolution to atomic scale, whilst automatic acquisition of high-resolution electron microscopy data through large volumes is finally able to place ultrastructure in biological context.

Atomic force microscope (AFM) combined with the ultramicrotome: a novel device for the serial section tomography and AFM/TEM complementary structural analysis of biological and polymer samples

A new device (NTEGRA Tomo) that is based on the integration of the scanning probe microscope (SPM) (NT-MDT NTEGRA SPM) and the Ultramicrotome (Leica UC6NT) is presented. This integration enables the direct monitoring of a block face surface immediately following each sectioning cycle of ultramicrotome sectioning procedure. Consequently, this device can be applied for a serial section tomography of the wide range of biological and polymer materials. The automation of the sectioning/scanning cycle allows one to acquire up to 10 consecutive sectioned layer images per hour. It also permits to build a 3-D nanotomography image reconstructed from several tens of layer images within one measurement session. The thickness of the layers can be varied from 20 to 2000 nm, and can be controlled directly by its interference colour in water. Additionally, the NTEGRA Tomo with its nanometer resolution is a valid instrument narrowing and highlighting an area of special interest within volume of the sample. For embedded biological objects the ultimate resolution of SPM mostly depends on the quality of macromolecular preservation of the biomaterial during sample preparation procedure. For most polymer materials it is comparable to transmission electron microscopy (TEM). The NTEGRA Tomo can routinely collect complementary AFM and TEM images. The block face of biological or polymer sample is investigated by AFM, whereas the last ultrathin section is analyzed with TEM after a staining procedure. Using the combination of both of these ultrastructural methods for the analysis of the same particular organelle or polymer constituent leads to a breakthrough in AFM/TEM image interpretation. Finally, new complementary aspects of the object's ultrastructure can be revealed.

Optimization of specimen preparation of thin cell section for AFM observation

High resolution imaging of intracellular structures of ultrathin cell section samples is critical to the performance of precise manipulation by atomic force microscopy (AFM). Here, we test the effect of multiple factors during section sample preparation on the quality of the AFM image. These factors include the embedding materials, the annealing process of the specimen block, section thickness, and section side. We found that neither the embedding materials nor the temperature and speed of the annealing process has any effect on AFM image resolution. However, the section thickness and section side significantly affect the surface topography and AFM image resolution. By systematically testing the image quality of both sides of cell sections over a wide range of thickness (40-1000 nm), we found that the best resolution was obtained with upper-side sections approximately 50-100 nm thick. With these samples, we could observe precise structure details of the cell, including its membrane, nucleoli, and other organelles. Similar results were obtained for other cell types, including Tca8113, C6, and ECV-304. In brief, by optimizing the condition of ultrathin cell section preparation, we were able to obtain high resolution intracellular AFM images, which provide an essential basis for further AFM manipulation.

Assessing the macroporous structure of monolithic columns by transmission electron microscopy

A set of monolithic stationary phases representing a broad span of monomers and porogens have been characterized directly in their capillary chromatographic format by computational assessment of their pore structure from transmission electron micrographs obtained after in situ embedment of the monoliths in contrast resin, followed by dissolution of the fused-silica tubing, further encasement of the resin-embedded monolith, and microtomy. This technique has been compared to mercury intrusion, a more conventional technique for macroporosity estimation. Supplementing the embedding resin by lead methacrylate gave a negative staining, and the resulting micrographs showed a good contrast between the polymeric monoliths and the embedding resin that allowed studies on the pore formation and polymer development. The technique was also applied to a commercial monolithic silica column.

Atomic force microscopy applied to study macromolecular content of embedded biological material

We demonstrate that atomic force microscopy represents a powerful tool for the estimation of structural preservation of biological samples embedded in epoxy resin, in terms of their macromolecular distribution and architecture. The comparison of atomic force microscopy (AFM) and transmission electron microscopy (TEM) images of a biosample (Caenorhabditis elegans) prepared following to different types of freeze-substitution protocols (conventional OsO4 fixation, epoxy fixation) led to the conclusion that high TEM stainability of the sample results from a low macromolecular density of the cellular matrix. We propose a novel procedure aimed to obtain AFM and TEM images of the same particular organelle, which strongly facilitates AFM image interpretation and reveals new ultrastructural aspects (mainly protein arrangement) of a biosample in addition to TEM data.

Pore size characterization of monolith for electrochromatography via atomic force microscopy studies in air and liquid phase

This paper investigates the use of scanning electron microscopy (SEM) and atomic force microscopy (AFM) for the characterization of monoliths used in capillary electrochromatography (CEC) while focusing on the nature of the information available from both techniques. SEM imaging revealed a compact structure of non-porous micrometer sized particles homogeneously agglomerated. With a simple AFM methodology, we found by direct observation that the same material exhibits mesopores in the nanometer range while SEM showed non-porous surfaces. These results obtained by AFM clearly showed that micrometer sized particles shrank and micrometer sized pores increased in the monolith when wetted. Thus, AFM was capable of demonstrating the morphological differences between wet and dried monolithic materials that are not possible by other imaging methods at micrometer resolution.

Epoxy resin as fixative during freeze-substitution

An alternative protocol for freeze-substitution is described. Araldite/Epon embedding medium (20% in acetone) is first used as a stabilizer (as e.g., OsO(4)) and then as embedding medium. The major components of the Araldite/Epon resin formulation react with proteins and lipids and provide for an excellent preservation and reasonable visualisation of the ultrastructure. The ultrastructural appearance can be deliberately influenced with the standard freeze-substitution procedure [Van Harreveld, A., Crowell, J., 1964. Electron microscopy after rapid freezing on a metal surface and substitution fixation. Anat. Rec. 149, 381-386.] using OsO(4) as stabilizing agent by protocols which degrade cytoplasmic and membrane proteins. Epoxy stabilized and embedded samples may become an important tool to get information about the effects of different reagents and protocols used in freeze-substitution. We believe that an in-depth understanding of the procedures is required to correctly interpret images and to complement studies of dynamic processes by light microscopy with reliable, highly detailed ultrastructural information. The block face of epoxy stabilized samples after ultrathin sectioning is highly suited for the analysis of the ultrastructure by AFM.