A near atomic resolution structure of a Melanocarpus albomyces laccase

Laccase Engineering: Redox Potential Is Not the Only Activity-Determining Feature in the Metalloproteins

Laccase, one of the metalloproteins, belongs to the multicopper oxidase family. It oxidizes a wide range of substrates and generates water as a sole by-product. The engineering of laccase is important to broaden their industrial and environmental applications. The general assumption is that the low redox potential of laccases is the principal obstacle, as evidenced by their low activity towards certain substrates. Therefore, the primary goal of engineering laccases is to improve their oxidation capability, thereby increasing their redox potential. Even though some of the determinants of laccase are known, it is still not entirely clear how to enhance its redox potential. However, the laccase active site has additional characteristics that regulate the enzymes' activity and specificity. These include the electrostatic and hydrophobic environment of the substrate binding pocket, the steric effect at the substrate binding site, and the orientation of the binding substrate with respect to the T1 site of the laccase. In this review, these features of the substrate binding site will be discussed to highlight their importance as a target for future laccase engineering.

Toward Selective Oxidation of Contaminants in Aqueous Systems

The presence of diverse pollutants in water has been threating human health and aquatic ecosystems on a global scale. For more than a century, chemical oxidation using strongly oxidizing species was one of the most effective technologies to destruct pollutants and to ensure a safe and clean water supply. However, the removal of increasing amount of pollutants with higher structural complexity, especially the emerging micropollutants with trace concentrations in the complicated water matrix, requires excessive dosage of oxidant and/or energy input, resulting in a low cost-effectiveness and possible secondary pollution. Consequently, it is of practical significance but scientifically challenging to achieve selective oxidation of pollutants of interest for water decontamination. Currently, there are a variety of examples concerning selective oxidation of pollutants in aqueous systems. However, a systematic understanding of the relationship between the origin of selectivity and its applicable water treatment scenarios, as well as the rational design of catalyst for selective catalytic oxidation, is still lacking. In this critical review, we summarize the state-of-the-art selective oxidation strategies in water decontamination and probe the origins of selectivity, that is, the selectivity resulting from the reactivity of either oxidants or target pollutants, the selectivity arising from the accessibility of pollutants to oxidants via adsorption and size exclusion, as well as the selectivity due to the interfacial electron transfer process and enzymatic oxidation. Finally, the challenges and perspectives are briefly outlined to stimulate future discussion and interest on selective oxidation for water decontamination, particularly toward application in real scenarios.

Inhibition in multicopper oxidases: a critical review

This review critiques the literature on inhibition of O₂-reduction catalysis in multicopper oxidases like laccase and bilirubin oxidase and provide recommendations for best practice when carrying out experiments and interpreting published data.

The subatomic resolution study of laccase inhibition by chloride and fluoride anions using single-crystal serial crystallography: insights into the enzymatic reaction mechanism

Laccases are enzymes that catalyze the oxidation of a wide range of organic and inorganic substrates accompanied by the reduction of molecular oxygen to water. Here, a subatomic resolution X-ray crystallographic study of the mechanism of inhibition of the laccase from the basidiomycete fungus Steccherinum murashkinskyi by chloride and fluoride ions is presented. Three series of X-ray diffraction data sets were collected with increasing doses of absorbed X-ray radiation from a native S. murashkinskyi laccase crystal and from crystals of complexes of the laccase with chloride and fluoride ions. The data for the native laccase crystal confirmed the previously deduced enzymatic mechanism of molecular oxygen reduction. The structures of the complexes allowed the localization of chloride and fluoride ions in the channel near the T2 copper ion. These ions replace the oxygen ligand of the T2 copper ion in this channel and can play the role of this ligand in the enzymatic reaction. As follows from analysis of the structures from the increasing dose series, the inhibition of laccases by chloride and fluoride anions can be explained by the fact that the binding of these negatively charged ions at the position of the oxygen ligand of the T2 copper ion impedes the reduction of the T2 copper ion.

A comparative structural analysis of the surface properties of asco-laccases

Laccases of different biological origins have been widely investigated and these studies have elucidated fundamentals of the generic catalytic mechanism. However, other features such as surface properties and residues located away from the catalytic centres may also have impact on enzyme function. Here we present the crystal structure of laccase from Myceliophthora thermophila (MtL) to a resolution of 1.62 Å together with a thorough structural comparison with other members of the CAZy family AA1_3 that comprises fungal laccases from ascomycetes. The recombinant protein produced in A. oryzae has a molecular mass of 75 kDa, a pI of 4.2 and carries 13.5 kDa N-linked glycans. In the crystal, MtL forms a dimer with the phenolic substrate binding pocket blocked, suggesting that the active form of the enzyme is monomeric. Overall, the MtL structure conforms with the canonical fold of fungal laccases as well as the features specific for the asco-laccases. However, the structural comparisons also reveal significant variations within this taxonomic subgroup. Notable differences in the T1-Cu active site topology and polar motifs imply molecular evolution to serve different functional roles. Very few surface residues are conserved and it is noticeable that they encompass residues that interact with the N-glycans and/or are located at domain interfaces. The N-glycosylation sites are surprisingly conserved among asco-laccases and in most cases the glycan displays extensive interactions with the protein. In particular, the glycans at Asn88 and Asn210 appear to have evolved as an integral part of the asco-laccase structure. An uneven distribution of the carbohydrates around the enzyme give unique properties to a distinct part of the surface of the asco-laccases which may have implication for laccase function–in particular towards large substrates.

The effect of high-energy environments on the structure of laccase-polymerized poly(catechol)

The laccase polymerization of catechol was performed using different reactors namely a water bath (WB), an ultrasonic bath (US) and a high-pressure homogenizer (HPH). The total content of free OH and the MALDI-TOF spectra of polymers obtained demonstrated that reactions are favored in the presence of high-energy environments. Higher conversion yields and polymerization degrees (DP) were obtained after polymerization using US or HPH. Molecular dynamic simulation studies supported these findings by revealing a more open enzyme active site upon environments with high molecular agitation. The higher mass transport generated by US and HPH is the main feature responsible for a higher substrate accessibility to the enzyme which contributed to produce longer polymers.

Interaction of the H-Cluster of FeFe Hydrogenase with Halides

FeFe hydrogenases catalyze H₂ oxidation and production using an "H-cluster", where two Fe ions are bound by an aza-dithiolate (adt) ligand. Various hypotheses have been proposed (by us and others) to explain that the enzyme reversibly inactivates under oxidizing, anaerobic conditions: intramolecular binding of the N atom of adt, formation of the so-called "Hox/inact" state or nonproductive binding of H₂ to isomers of the H-cluster. Here, we show that none of the above explains the new finding that the anaerobic, oxidative, H₂-dependent reversible inactivation is strictly dependent on the presence of Cl^- or Br^-. We provide experimental evidence that chloride uncompetitively inhibits the enzyme: it reversibly binds to catalytic intermediates of H₂ oxidation (but not to the resting "Hox" state), after which oxidation locks the active site into a stable, saturated, inactive form, the structure of which is proposed here based on DFT calculations. The halides interact with the amine group of the H-cluster but do not directly bind to iron. It should be possible to stabilize the inhibited state in amounts compatible with spectroscopic investigations to explore further this unexpected reactivity of the H-cluster of hydrogenase.

Structural and functional characterisation of multi-copper oxidase CueO from lignin-degrading bacterium Ochrobactrum sp. reveal its activity towards lignin model compounds and lignosulfonate

The identification of enzymes responsible for oxidation of lignin in lignin-degrading bacteria is of interest for biotechnological valorization of lignin to renewable chemical products. The genome sequences of two lignin-degrading bacteria, Ochrobactrum sp., and Paenibacillus sp., contain no B-type DyP peroxidases implicated in lignin degradation in other bacteria, but contain putative multicopper oxidase genes. Multi-copper oxidase CueO from Ochrobactrum sp. was expressed and reconstituted as a recombinant laccase-like enzyme, and kinetically characterized. Ochrobactrum CueO shows activity for oxidation of β-aryl ether and biphenyl lignin dimer model compounds, generating oxidized dimeric products, and shows activity for oxidation of Ca-lignosulfonate, generating vanillic acid as a low molecular weight product. The crystal structure of Ochrobactrum CueO (OcCueO) has been determined at 1.1 Å resolution (PDB: 6EVG), showing a four-coordinate mononuclear type I copper center with ligands His495, His434 and Cys490 with Met500 as an axial ligand, similar to that of Escherichia coli CueO and bacterial azurin proteins, whereas fungal laccase enzymes contain a three-coordinate type I copper metal center. A trinuclear type 2/3 copper cluster was modeled into the active site, showing similar structure to E. coli CueO and fungal laccases, and three solvent channels leading to the active site. Site-directed mutagenesis was carried out on amino acid residues found in the solvent channels, indicating the importance for residues Asp102, Gly103, Arg221, Arg223, and Asp462 for catalytic activity. The work identifies a new bacterial multicopper enzyme with activity for lignin oxidation, and implicates a role for bacterial laccase-like multicopper oxidases in some lignin-degrading bacteria.

DATABASE

Structural data are available in the PDB under the accession number 6EVG.

Mechanism of salt-induced activity enhancement of a marine-derived laccase, Lac15

Laccase (benzenediol: oxygen oxidoreductases, EC1.10.3.2) is a multi-copper oxidase capable of oxidizing a variety of phenolic and other aromatic organic compounds. The catalytic power of laccase makes it an attractive candidate for potential applications in many areas of industry including biodegradation of organic pollutants and synthesis of novel drugs. Most laccases are vulnerable to high salt and have limited applications. However, some laccases are not only tolerant to but also activated by certain concentrations of salt and thus have great application potential. The mechanisms of salt-induced activity enhancement of laccases are unclear as yet. In this study, we used dynamic light scattering, size exclusion chromatography, analytical ultracentrifugation, intrinsic fluorescence emission, circular dichroism, ultraviolet-visible light absorption, and an enzymatic assay to investigate the potential correlation between the structure and activity of the marine-derived laccase, Lac15, whose activity is promoted by low concentrations of NaCl. The results showed that low concentrations of NaCl exert little influence on the protein structure, which was partially folded in the absence of the salt; moreover, the partially folded rather than the fully folded state seemed to be favorable for enzyme activity, and this partially folded state was distinctive from the so-called 'molten globule' occasionally observed in active enzymes. More data indicated that salt might promote laccase activity through mechanisms involving perturbation of specific local sites rather than a change in global structure. Potential binding sites for chloride ions and their roles in enzyme activity promotion are proposed.

Phylogenomic analyses reveal the diversity of laccase-coding genes in Fonsecaea genomes

The genus Fonsecaea comprises black yeast-like fungi of clinical relevance, including etiologic agents of chromoblastomycosis and cerebral phaeohyphomycosis. Presence of melanin and assimilation of monoaromatic hydrocarbons and alkylbenzenes have been proposed as virulence factors. Multicopper oxidase (MCO) is a family of enzymes including laccases, ferroxidases and ascorbate oxidases which are able to catalyze the oxidation of various aromatic organic compounds with the reduction of molecular oxygen to water. Additionally, laccases are required for the production of fungal melanins, a cell-wall black pigment recognized as a key polymer for pathogenicity and extremotolerance in black yeast-like fungi. Although the activity of laccase enzymes has previously been reported in many wood-rotting fungi, the diversity of laccase genes in Fonsecaea has not yet been assessed. In this study, we identified and characterized laccase-coding genes and determined their genomic location in five clinical and environmental Fonsecaea species. The identification of laccases sensu stricto will provide insights into carbon acquisition strategies as well as melanin production in Fonsecaea.

Structure and molecular evolution of multicopper blue proteins

The multicopper blue protein family, which contains cupredoxin-like domains as a structural unit, is one of the most diverse groups of proteins. This protein family is divided into two functionally different types of enzymes: multicopper oxidase and nitrite reductase. Multicopper oxidase catalyzes the oxidation of the substrate and then reduces dioxygen. The structures of many multicopper oxidases are already known, and until recently they were classified into two main groups: the three- and six-domain types. Both function as monomers and have three spectroscopically different copper sites: Types I (blue), II, and III (tri-nuclear). Nitrite reductase is a closely related protein that contains Types I and II (mono-nuclear) coppers but reduces nitrite instead of dioxygen. Nitrite reductase, which consists of two domains, forms a homotrimer. Multicopper oxidase and nitrite reductase share similar structural architectures and also contain Type I copper. Therefore, it is proposed that they have a common ancestor protein. Recently, some two-domain type multicopper oxidases have been found and their crystal structures have been determined. They have a trimeric quaternary structure and contain an active site at the molecular interface such as nitrite reductase. These results support previous hypotheses and provide an insight into the molecular evolution of multicopper blue proteins.

Molecular and computational approaches to characterize thermostable laccase gene from two xerophytic plant species

Laccases are blue multicopper oxidases that carry out single electron transfers in the oxidation of phenols to quinones. In plants, they confer structural stability to the cell wall. Thermostable laccases were identified in xerophytes Cereus pterogonus and Opuntia vulgaris that could be used in biotechnology and industrial processes. Polyclonal anti-laccase antibodies were generated against purified laccase enzyme isoforms capable of 98-99% inhibition of the catalytic activity. Antibodies raised against lower molecular weight isoforms inhibited 70% of the catalytic activity of higher molecular forms. Only 20% inhibition was noted when assayed in reverse. A partial gene sequence of thermostable xerophytic laccase comprising 712 and 880 bp was identified employing cDNA as template. The nucleotide sequence was submitted to GenBank. The gene sequence was in silico translated into protein sequence and a 3-D structure was predicted using I-Tasser and Genesilico online servers that justified the experimental observations. Anti-laccase antibodies and nucleotide gene sequence of this thermostable plant laccase can be utilized for predicting laccase antigenic sequences and for cloning and expression of the thermostable eukaryotic laccase.

Structural and phylogenetic analysis of laccases from Trichoderma: a bioinformatic approach

The genus Trichoderma includes species of great biotechnological value, both for their mycoparasitic activities and for their ability to produce extracellular hydrolytic enzymes. Although activity of extracellular laccase has previously been reported in Trichoderma spp., the possible number of isoenzymes is still unknown, as are the structural and functional characteristics of both the genes and the putative proteins. In this study, the system of laccases sensu stricto in the Trichoderma species, the genomes of which are publicly available, were analyzed using bioinformatic tools. The intron/exon structure of the genes and the identification of specific motifs in the sequence of amino acids of the proteins generated in silico allow for clear differentiation between extracellular and intracellular enzymes. Phylogenetic analysis suggests that the common ancestor of the genus possessed a functional gene for each one of these enzymes, which is a characteristic preserved in T. atroviride and T. virens. This analysis also reveals that T. harzianum and T. reesei only retained the intracellular activity, whereas T. asperellum added an extracellular isoenzyme acquired through horizontal gene transfer during the mycoparasitic process. The evolutionary analysis shows that in general, extracellular laccases are subjected to purifying selection, and intracellular laccases show neutral evolution. The data provided by the present study will enable the generation of experimental approximations to better understand the physiological role of laccases in the genus Trichoderma and to increase their biotechnological potential.

A new marine bacterial laccase with chloride-enhancing, alkaline-dependent activity and dye decolorization ability

A bacterial laccase gene designated as lac21 was screened from a marine microbial metagenomic library of the South China Sea based on sequence screening strategy. The protein encoded by lac21 shared less than 40% sequence identities with all of the laccases found. Lac21, which was recombinantly expressed in Escherichia coli, showed high activity toward syringaldazine at an optimum pH of 7.5 and temperature of 45°C. Lac21 was stable at pH values ranging from 5.5 to 9.0 and temperatures lower than 40°C. Interestingly, chloride enhanced the laccase activity, with concomitant increase in substrate affinity. Furthermore, Lac21 has high decolorization capability toward azo dyes in the absence of redox mediators, with 80% of Reactive Deep Blue M-2GE (50mg/L) being decolorized by 15U/L enzyme after 24h incubation at 20°C. These unusual properties demonstrate that the new bacterial laccase Lac21 has potentials in specific industrial or environmental applications.

Structural changes caused by radiation-induced reduction and radiolysis: the effect of X-ray absorbed dose in a fungal multicopper oxidase

X-ray radiation induces two main effects at metal centres contained in protein crystals: radiation-induced reduction and radiolysis and a resulting decrease in metal occupancy. In blue multicopper oxidases (BMCOs), the geometry of the active centres and the metal-to-ligand distances change depending on the oxidation states of the Cu atoms, suggesting that these alterations are catalytically relevant to the binding, activation and reduction of O(2). In this work, the X-ray-determined three-dimensional structure of laccase from the basidiomycete Coriolopsis gallica (Cg L), a high catalytic potential BMCO, is described. By combining spectroscopic techniques (UV-Vis, EPR and XAS) and X-ray crystallography, structural changes at and around the active copper centres were related to pH and absorbed X-ray dose (energy deposited per unit mass). Depletion of two of the four active Cu atoms as well as low occupancies of the remaining Cu atoms, together with different conformations of the metal centres, were observed at both acidic pH and high absorbed dose, correlating with more reduced states of the active coppers. These observations provide additional evidence to support the role of flexibility of copper sites during O(2) reduction. This study supports previous observations indicating that interpretations regarding redox state and metal coordination need to take radiation effects explicitly into account.

A chloride tolerant laccase from the plant pathogen ascomycete Botrytis aclada expressed at high levels in Pichia pastoris

Fungal laccases from basidiomycetous fungi are thoroughly investigated in respect of catalytic mechanism and industrial applications, but the number of reported and well characterized ascomycetous laccases is much smaller although they exhibit interesting catalytic properties. We report on a highly chloride tolerant laccase produced by the plant pathogen ascomycete Botrytis aclada, which was recombinantly expressed in Pichia pastoris with an extremely high yield and purified to homogeneity. In a fed-batch fermentation, 495 mg L(-1) of laccase was measured in the medium, which is the highest concentration obtained for a laccase by a yeast expression system. The recombinant B. aclada laccase has a typical molecular mass of 61,565 Da for the amino acid chain. The pI is approximately 2.4, a very low value for a laccase. Glycosyl residues attached to the recombinant protein make up for approximately 27% of the total protein mass. B. aclada laccase exhibits very low K(M) values and high substrate turnover numbers for phenolic and non-phenolic substrates at acidic and near neutral pH. The enzyme's stability increases in the presence of chloride ions and, even more important, its substrate turnover is only weakly inhibited by chloride ions (I(50)=1.4M), which is in sharp contrast to most other described laccases. This high chloride tolerance is mandatory for some applications such as implantable biofuel cells and laccase catalyzed reactions, which suffer from the presence of chloride ions. The high expression yield permits fast and easy production for further basic and applied research.

Evolution of multicopper oxidase genes in coprophilous and non-coprophilous members of the order sordariales

Multicopper oxidases (MCO) catalyze the biological oxidation of various aromatic substrates and have been identified in plants, insects, bacteria, and wood rotting fungi. In nature, they are involved in biodegradation of biopolymers such as lignin and humic compounds, but have also been tested for various industrial applications. In fungi, MCOs have been shown to play important roles during their life cycles, such as in fruiting body formation, pigment formation and pathogenicity. Coprophilous fungi, which grow on the dung of herbivores, appear to encode an unexpectedly high number of enzymes capable of at least partly degrading lignin. This study compared the MCO-coding capacity of the coprophilous filamentous ascomycetes Podospora anserina and Sordaria macrospora with closely related non-coprophilous members of the order Sordariales. An increase of MCO genes in coprophilic members of the Sordariales most probably occurred by gene duplication and horizontal gene transfer events.

Heterologous laccase production and its role in industrial applications

Laccases are blue multicopper oxidases, catalyzing the oxidation of an array of aromatic substrates concomitantly with the reduction of molecular oxygen to water. These enzymes are implicated in a variety of biological activities. Most of the laccases studied thus far are of fungal origin. The large range of substrates oxidized by laccases has raised interest in using them within different industrial fields, such as pulp delignification, textile dye bleaching, and bioremediation. Laccases secreted from native sources are usually not suitable for large-scale purposes, mainly due to low production yields and high cost of preparation/purification procedures. Heterologous expression may provide higher enzyme yields and may permit to produce laccases with desired properties (such as different substrate specificities, or improved stabilities) for industrial applications. This review surveys researches on heterologous laccase expression focusing on the pivotal role played by recombinant systems towards the development of robust tools for greening modern industry.

μ-Bromido-bis{μ-2,2'-[4,7-diaza-decane-1,10-diylbis(nitrilo-methanylyl-idene)]diphenolato}tricopper(II) bromide dimethyl-formamide disolvate

The complex mol-ecule of the title compound, [Cu(3)Br(C(22)H(28)N(4)O(2))(2)]Br·2C(3)H(7)NO, contains three copper atoms, two of which are five-coordinate within a square-pyramidal environment and linked by a bridging Br atom occupying the apical position in each square pyramid. The remaining Cu atom is four-coordinate but with considerable tetra-hedral disortion [the dihedral angle between the two chelate planes is 69.21 (7)°]. There are two mol-ecules of dimethyl-formamide (DMF) present as solvent mol-ecules, one of which is disordered over two equivalent conformations with occupancies of 0.603 (5) and 0.397 (5). The amine H atoms are involved in both inter- and intra-molecular hydrogen-bonding inter-actions with the Br and O atoms of the cation, as well as with the O atom of the ordered DMF mol-ecule.

Laccase chloride inhibition reduction by an anthraquinonic substrate

Due to their low substrate specificity, fungal laccases have a great potential in industrial applications, including the bioremediation of colored wastewaters from textile industry. However, the presence of halides in these effluents (up to 1M NaCl) which inhibit laccases is a drawback for bioremediation processes. In order to develop an efficient enzymatic remediation process for textile dye effluent, the possibility to reduce this halide inhibition is conditioned by a better understanding of the phenomenon. The present study gives a detailed account of the kinetics of chloride inhibition of both ABTS (a model substrate) and ABu62 (an anthraquinonic acid dye) oxidations catalyzed by Trametes versicolor laccase (LacIIIb). Chloride inhibition can be described by a mixed model for ABTS and a non-competitive model for ABu62 and both inhibitions are linear suggesting a single inhibitory site for chloride. Experiments were also conducted in presence of both substrates. An apparent activation of laccase was observed in the presence of ABu62 leading to an enhancement of the oxidation rate of ABTS. The extent of activation increased in the presence of chloride anions. Finally, for the first time to our knowledge, we evidenced that inhibition of ABTS oxidation by chloride can be reduced in the presence of ABu62.

Probing the dioxygen route in Melanocarpus albomyces laccase with pressurized xenon gas

Laccases catalyze the oxidation of phenolic substrates and the concominant reduction of dioxygen to water. We used xenon as an oxygen probe in search of routes for the entry of dioxygen into the catalytic center. Two xenon-pressurized crystal structures of recombinant Melanocarpus albomyces laccase were determined, showing three hydrophobic Xe-binding sites located in domain C. The analysis of hydrophobic cavities in other laccase structures further suggested the preference of domain C for binding of hydrophobic species such as dioxygen, thus suggesting that the hydrophobic core of domain C could function as a channel through which dioxygen can enter the trinuclear copper center.

Channeling of electrons within SLAC, the small laccase from Streptomyces coelicolor

The reduction kinetics of the fluorescently labeled small laccase (SLAC) from Streptomyces coelicolor was studied by stopped flow kinetic measurements. The tryptophan fluorescence and the emission from a covalently attached label were used to selectively follow the progress of the reduction of the trinuclear copper center (TNC) and the type-1 (T1) Cu site in the enzyme as a function of time. A numerical analysis of the kinetic traces provided new insight into the midpoint potential difference between the T1 and the TNC site as the TNC becomes stepwise charged with electrons. The change in fluorescence of the TNC as the reduction of the TNC proceeds provided evidence that the type-3 dinuclear part of the TNC becomes charged prior to the reduction of the type-2 (T2) center of the TNC. The rate of reduction of the enzyme by dithionite (DT) appeared proportional to the square root of the DT concentration with a rate constant of k(red) = 0.28 +/- 0.02 microM(-1/2) s(-1).

ATR-FTIR study of the protonation states of the Glu residue in the multicopper oxidases, CueO and bilirubin oxidase

Redox-induced protonation state changes of the Glu residue in the multicopper oxidases, CueO and bilirubin oxidase (BO), were studied by attenuated total reflectance-Fourier transform infrared spectroscopy. By monitoring IR bands of the carboxylic acid C=O stretch in the wild-type and Glu-to-Gln mutant enzymes the Glu506 of CueO (Glu463 of BO) was found to be unprotonated in the oxidised and protonated in the reduced forms. The results provided direct evidence for proton uptake by the Glu, suggesting it plays a key role in the proton donation to the activated oxygen species in the catalytic cycle.

The role of Glu498 in the dioxygen reactivity of CotA-laccase from Bacillus subtilis

The multicopper oxidases couple the one-electron oxidation of four substrate molecules to the four electron reductive cleavage of the O-O bond of dioxygen. This reduction takes place at the trinuclear copper centre of the enzyme and the dioxygen approaches this centre through an entrance channel. In this channel, an acidic residue plays a key role in steering the dioxygen to the trinuclear copper site, providing protons for the catalytic reaction and giving overall stability to this site. In this study, the role of the Glu(498) residue, located within the entrance channel to the trinuclear copper centre, has been investigated in the binding and reduction of dioxygen by the CotA-laccase from Bacillus subtilis. The absence of an acidic group at the 498 residue, as in the E498T and E498L mutants, results in a severe catalytic impairment, higher than 99%, for the phenolic and non-phenolic substrates tested. The replacement of this glutamate by aspartate leads to an activity that is around 10% relative to that of the wild-type. Furthermore, while this latter mutant shows a similar K(m) value for dioxygen, the E498T and E498L mutants show a decreased affinity, when compared to the wild-type. X-ray structural and spectroscopic analysis (UV-visible, electron paramagnetic resonance and resonance Raman) reveal perturbations of the structural properties of the catalytic centres in the Glu(498) mutants when compared to the wild-type protein. Overall, the results strongly suggest that Glu(498) plays a key role in the protonation events that occur at the trinuclear centre and in its stabilization, controlling therefore the binding of dioxygen and its further reduction.

Laccases: a never-ending story

Laccases (benzenediol:oxygen oxidoreductases, EC 1.10.3.2) are blue multicopper oxidases that catalyze the oxidation of an array of aromatic substrates concomitantly with the reduction of molecular oxygen to water. In fungi, laccases carry out a variety of physiological roles during their life cycle. These enzymes are being increasingly evaluated for a variety of biotechnological applications due to their broad substrate range. In this review, the most recent studies on laccase structural features and catalytic mechanisms along with analyses of their expression are reported and examined with the aim of contributing to the discussion on their structure-function relationships. Attention has also been paid to the properties of enzymes endowed with unique characteristics and to fungal laccase multigene families and their organization.

Defining the role of the axial ligand of the type 1 copper site in amicyanin by replacement of methionine with leucine

The effects of replacing the axial methionine ligand of the type 1 copper site with leucine on the structure and function of amicyanin have been characterized. The crystal structures of the oxidized and reduced forms of the protein reveal that the copper site is now tricoordinate with no axial ligand, and that the copper coordination distances for the two ligands provided by histidines are significantly increased. Despite these structural changes, the absorption and EPR spectra of M98L amicyanin are only slightly altered and still consistent with that of a typical type 1 site. The oxidation-reduction midpoint potential (E(m)) value becomes 127 mV more positive as a consequence of the M98L mutation, most likely because of the increased hydrophobicity of the copper site. The most dramatic effect of the mutation was on the electron transfer (ET) reaction from reduced M98L amicyanin to cytochrome c(551i) within the protein ET complex. The rate decreased 435-fold, which was much more than expected from the change in E(m). Examination of the temperature dependence of the ET rate (k(ET)) revealed that the mutation caused a 13.6-fold decrease in the electronic coupling (H(AB)) for the reaction. A similar decrease was predicted from a comparative analysis of the crystal structures of reduced M98L and native amicyanins. The most direct route of ET for this reaction is through the Met98 ligand. Inspection of the structures suggests that the major determinant of the large decrease in the experimentally determined values of H(AB) and k(ET) is the increased distance from the copper to the protein within the type 1 site of M98L amicyanin.

Essential role of the C-terminus in Melanocarpus albomyces laccase for enzyme production, catalytic properties and structure

The C-terminus of the fungal laccase from Melanocarpus albomyces (MaL) is processed during secretion at a processing site conserved among the ascomycete laccases. The three-dimensional structure of MaL has been solved as one of the first complete laccase structures. According to the crystal structure of MaL, the four C-terminal amino acids of the mature protein penetrate into a tunnel leading towards the trinuclear site. The C-terminal carboxylate group forms a hydrogen bond with a side chain of His140, which also coordinates to the type 3 copper. In order to analyze the role of the processed C-terminus, site-directed mutagenesis of the MaL cDNA was performed, and the mutated proteins were expressed in Trichoderma reesei and Saccharomyces cerevisiae. Changes in the C-terminus of MaL caused major defects in protein production in both expression hosts. The deletion of the last four amino acids dramatically affected the activity of the enzyme, as the deletion mutant delDSGL(559) was practically inactive. Detailed characterization of the purified L559A mutant expressed in S. cerevisiae showed the importance of the C-terminal plug for laccase activity, stability, and kinetics. Moreover, the crystal structure of the L559A mutant expressed in S. cerevisiae showed that the C-terminal mutation had clearly affected the trinuclear site geometry. The results in this study clearly confirm the critical role of the last amino acids in the C-terminus of MaL.

Structure-function studies of a Melanocarpus albomyces laccase suggest a pathway for oxidation of phenolic compounds

Melanocarpus albomyces laccase crystals were soaked with 2,6-dimethoxyphenol, a common laccase substrate. Three complex structures from different soaking times were solved. Crystal structures revealed the binding of the original substrate and adducts formed by enzymatic oxidation of the substrate. The dimeric oxidation products were identified by mass spectrometry. In the crystals, a 2,6-dimethoxy-p-benzoquinone and a C-O dimer were observed, whereas a C-C dimer was the main product identified by mass spectrometry. Crystal structures demonstrated that the substrate and/or its oxidation products were bound in the pocket formed by residues Ala191, Pro192, Glu235, Leu363, Phe371, Trp373, Phe427, Leu429, Trp507 and His508. Substrate and adducts were hydrogen-bonded to His508, one of the ligands of type 1 copper. Therefore, this surface-exposed histidine most likely has a role in electron transfer by laccases. Based on our mutagenesis studies, the carboxylic acid residue Glu235 at the bottom of the binding site pocket is also crucial in the oxidation of phenolics. Glu235 may be responsible for the abstraction of a proton from the OH group of the substrate and His508 may extract an electron. In addition, crystal structures revealed a secondary binding site formed through weak dimerization in M. albomyces laccase molecules. This binding site most likely exists only in crystals, when the Phe427 residues are packed against each other.

Thermotolerant and thermostable laccases

Laccases are phenol-oxidizing, usually four-copper containing metalloenzymes. For industrial and biotechnological purposes, laccases were among the first fungal oxidoreductases providing larger-scale applications such as removal of polyphenols in wine and beverages, conversion of toxic compounds and textile dyes in waste waters, and in bleaching and removal of lignin from wood and non-wood fibres. In order to facilitate novel and more efficient bio-catalytic process applications, there is a need for laccases with improved biochemical properties, such as thermostability and thermotolerance. This review gives a current overview on the sources and characteristics of such laccases, with particular emphasis on the fungal enzymes.

The contribution of polystyrene nanospheres towards the crystallization of proteins

Background

Protein crystallization is a slow process of trial and error and limits the amount of solved protein structures. Search of a universal heterogeneous nucleant is an effort to facilitate crystallizability of proteins.

Methodology

The effect of polystyrene nanospheres on protein crystallization were tested with three commercial proteins: lysozyme, xylanase, xylose isomerase, and with five research target proteins: hydrophobins HFBI and HFBII, laccase, sarcosine dimethylglycine N-methyltransferase (SDMT), and anti-testosterone Fab fragment 5F2. The use of nanospheres both in screening and as an additive for known crystallization conditions was studied. In screening, the addition of an aqueous solution of nanosphere to the crystallization drop had a significant positive effect on crystallization success in comparison to the control screen. As an additive in hydrophobin crystallization, the nanospheres altered the crystal packing, most likely due to the amphiphilic nature of hydrophobins. In the case of laccase, nanospheres could be used as an alternative for streak-seeding, which insofar had remained the only technique to produce high-diffracting crystals. With methyltransferase SDMT the nanospheres, used also as an additive, produced fewer, larger crystals in less time. Nanospheres, combined with the streak-seeding method, produced single 5F2 Fab crystals in shorter equilibration times.

Conclusions

All in all, the use of nanospheres in protein crystallization proved to be beneficial, both when screening new crystallization conditions to promote nucleation and when used as an additive to produce better quality crystals, faster. The polystyrene nanospheres are easy to use, commercially available and close to being inert, as even with amphiphilic proteins only the crystal packing is altered and the nanospheres do not interfere with the structure and function of the protein.