Open questions on the 3D structures of collagen containing vertebrate mineralized tissues: A perspective

3D relationship between hierarchical canal network and gradient mineralization of shark tooth osteodentin

Osteodentin is a dominant mineralized collagenous tissue in the teeth of many fishes, with structural and histological characteristics resembling those of bone. Osteodentin, like bone, comprises osteons as basic structural building blocks, however, it lacks the osteocytes and the lacuno-canalicular network (LCN), which are known to play critical roles in controlling the mineralization of the collagenous matrix in bone. Although numerous vascular canals exist in osteodentin, their role in tooth maturation and the matrix mineralization process remain poorly understood. Here, high resolution micro-computed tomography (micro-CT) and focused ion beam-scanning electron microscopy (FIB-SEM) were used to obtain 3D structural information of osteodentin in shark teeth at multiple scales. We observed a complex 3D network of primary canals with a diameter ranging from ∼10 µm to ∼120 µm, where the canals are surrounded by osteon-like concentric layers of lamellae, with 'interosteonal' tissue intervening between neighboring osteons. In addition, numerous hierarchically branched secondary canals extended radially from the primary canals into the interosteonal tissue, decreasing in diameter from ∼10 µm to hundreds of nanometers. Interestingly, the mineralization degree increases from the periphery of primary canals into the interosteonal tissue, suggesting that mineralization begins in the interosteonal tissue. Correspondingly, the hardness and elastic modulus of the interosteonal tissue are higher than those of the osteonal tissue. These results demonstrate that the 3D hierarchical canal network is positioned to play a critical role in controlling the gradient mineralization of osteodentin, also providing valuable insight into the formation of mineralized collagenous tissue without osteocytes and LCN. STATEMENT OF SIGNIFICANCE: Bone is a composite material with versatile mechanical properties. Osteocytes and their lacuno-canalicular network (LCN) are known to play critical roles during formation of human bone. However, the bone and osteodentin of many fishes, although lacking osteocytes and LCN, exhibit similar osteon-like structure and mechanical functions. Here, using various high resolution 3D characterization techniques, we reveal that the 3D network of primary canals and numerous hierarchically branched secondary canals correlate with the mineralization gradient and micromechanical properties of osteonal and interosteonal tissues of shark tooth osteodentin. This work significantly improves our understanding of the construction of bone-like mineralized tissue without osteocytes and LCN, and provides inspirations for the fabrication of functional materials with hierarchical structure.

Tissue engineered bone via templated hBMSCs mineralization and its application for bone repairing

To develop bone implants, a novel tissue-engineered bone was constructed via templated human bone mesenchymal stem cells (hBMSCs) mineralization. Firstly, an osteoid-like template (Os-template) with aligned collagen fibers was prepared and followed by seeding hBMSCs to mimic the process of bone formation. After being cultured over weeks, the cells produced collagen fibers in an orderly aligned osteomorphic fashion. Further, a novel tissue-engineered bone with mineralized collagen fiber (mOs-ECM) was subsequently achieved after cell mineralization, showing a high degree of osteomimicry in terms of both composition and structure. When applied to the rat cranial bone defect model, the mOs-ECM significantly promoted the new bone formation and fused with the host bone. The study indicated that microscopic cell mineralization could be guided by artificially designed templates and successfully fabricated a macroscopic implant with a pronounced effect on bone repairing.

Poor bone matrix quality: What can be done about it?

PURPOSE OF THE REVIEW

Bone's ability to withstand load resisting fracture and adapting to it highly depends on the quality of its matrix and its regulators. This review focuses on the contribution of bone quality to fracture resistance and possible therapeutic targets for skeletal fragility in aging and disease.

RECENT FINDINGS

The highly organized, hierarchical composite structure of bone extracellular matrix together with its (re)modeling mechanisms and microdamage dynamics determines its stiffness, strength, and toughness. Aging and disease affect the biological processes regulating bone quality, thus resulting in defective extracellular matrix and bone fragility. Targeted therapies are being developed to restore bone's mechanical integrity. However, their current limitations include low tissue selectivity and adverse side effects. Biological and mechanical insights into the mechanisms controlling bone quality, together with advances in drug delivery and studies in animal models, will accelerate the development and translation to clinical application of effective targeted-therapeutics for bone fragility.

Multiscale characterization of pathological bone tissue

Bone is a complex natural material with a complex hierarchical multiscale organization, crucial to perform its functions. Ultrastructural analysis of bone is crucial for our understanding of cell to cell communication, the healthy or pathological composition of bone tissue, and its three‐dimensional (3D) organization. A variety of techniques has been used to analyze bone tissue. This article describes a combined approach of optical, scanning electron, and transmission electron microscopy for the ultrastructural analysis of bone from the nanoscale to the macroscale, as illustrated by two pathological bone tissues. By following a top‐down approach to investigate the multiscale organization of pathological bones, quantitative estimates were made in terms of calcium content, nearest neighbor distances of osteocytes, canaliculi diameter, ordering, and D‐spacing of the collagen fibrils, and the orientation of intrafibrillar minerals which enable us to observe the fine structural details. We identify and discuss a series of two‐dimensional (2D) and 3D imaging techniques that can be used to characterize bone tissue. By doing so we demonstrate that, while 2D imaging techniques provide comparable information from pathological bone tissues, significantly different structural details are observed upon analyzing the pathological bone tissues in 3D. Finally, particular attention is paid to sample preparation for and quantitative processing of data from electron microscopic analysis.

Focused ion beam-SEM 3D analysis of mineralized osteonal bone: lamellae and cement sheath structures

The mineralized collagen fibril is the basic building block of bone, and hence is the key to understanding bone structure and function. Here we report imaging of mineralized pig bone samples in 3D using the focused ion beam-scanning electron microscope (FIB-SEM) under conditions that reveal the 67 nm D-banding of mineralized collagen fibrils. We show that in adult pig osteons, the lamellar bone comprises alternating layers with either collagen fibrils predominantly aligned in one direction, and layers in which fibrils are predominantly aligned in two directions. The cement sheath contains thin layers of both these motifs, but its dominant structural component comprises a very complex layer of fibrils predominantly aligned in three or more directions. The degree of mineralization of the cement sheath is comparable to that of the osteon interior. The extent of alignment (dispersion) of the collagen fibrils in the osteonal lamellar bone is significantly higher than in the cement sheath. Canaliculi within the cement sheath are mainly aligned parallel to the cement sheath boundary, whereas in the lamellar bone they are mainly aligned perpendicular to the lamellar boundaries. This study further characterizes the presence of two types of collagen fibril arrangements previously identified in demineralized lamellar bone from other species. The simple sample preparation procedure for mineralized bone and the lower risk of introducing artifacts opens the possibility of using FIB-SEM to study more samples, to obtain automatic quantitative information on collagen fibril organization and to evaluate the degrees of mineralization all in relatively large volumes of bone.

Macrobiomineralogy: Insights and Enigmas in Giant Whale Bones and Perspectives for Bioinspired Materials Science

The giant bones of whales (Cetacea) are the largest extant biomineral-based constructs known. The fact that such mammalian bones can grow up to 7 m long raises questions about differences and similarities to other smaller bones. Size and exposure to environmental stress are good reasons to suppose that an unexplored level of hierarchical organization may be present that is not needed in smaller bones. The existence of such a macroscopic naturally grown structure with poorly described mechanisms for biomineralization is an example of the many yet unexplored phenomena in living organisms. In this article, we describe key observations in macrobiomineralization and suggest that the large scale of biomineralization taking place in selected whale bones implies they may teach us fundamental principles of the chemistry, biology, and biomaterials science governing bone formation, from atomistic to the macrolevel. They are also associated with a very lipid rich environment on those bones. This has implications for bone development and damage sensing that has not yet been fully addressed. We propose that whale bone construction poses extreme requirements for inorganic material storage, mediated by biomacromolecules. Unlike extinct large mammals, cetaceans still live deep in large terrestrial water bodies following eons of adaptation. The nanocomposites from which the bones are made, comprising biomacromolecules and apatite nanocrystals, must therefore be well adapted to create the macroporous hierarchically structured architectures of the bones, with mechanical properties that match the loads imposed in vivo. This massive skeleton directly contributes to the survival of these largest mammals in the aquatic environments of Earth, with structural refinements being the result of 60 million years of evolution. We also believe that the concepts presented in this article highlight the beneficial uses of multidisciplinary and multiscale approaches to study the structural peculiarities of both organic and inorganic phases as well as mechanisms of biomineralization in highly specialized and evolutionarily conserved hard tissues.

Formation and Developmental Specification of the Odontogenic and Osteogenic Mesenchymes

Within the mandible, the odontogenic and osteogenic mesenchymes develop in a close proximity and form at about the same time. They both originate from the cranial neural crest. These two condensing ecto-mesenchymes are soon separated from each other by a very loose interstitial mesenchyme, whose cells do not express markers suggesting a neural crest origin. The two condensations give rise to mineralized tissues while the loose interstitial mesenchyme, remains as a soft tissue. This is crucial for proper anchorage of mammalian teeth. The situation in all three regions of the mesenchyme was compared with regard to cell heterogeneity. As the development progresses, the early phenotypic differences and the complexity in cell heterogeneity increases. The differences reported here and their evolution during development progressively specifies each of the three compartments. The aim of this review was to discuss the mechanisms underlying condensation in both the odontogenic and osteogenic compartments as well as the progressive differentiation of all three mesenchymes during development. Very early, they show physical and structural differences including cell density, shape and organization as well as the secretion of three distinct matrices, two of which will mineralize. Based on these data, this review highlights the consecutive differences in cell-cell and cell-matrix interactions, which support the cohesion as well as mechanosensing and mechanotransduction. These are involved in the conversion of mechanical energy into biochemical signals, cytoskeletal rearrangements cell differentiation, or collective cell behavior.

An unusual disordered alveolar bone material in the upper furcation region of minipig mandibles: A 3D hierarchical structural study

Teeth are subjected to compressive loads during mastication. Under small loads the soft tissue periodontal ligament (PDL) deforms most. However when the loads increase and the PDL is highly compressed, the tooth and the alveolar bone supporting the tooth, begin to deform. Here we report on the structure of this alveolar bone in the upper furcation region of the first molars of mature minipigs. Using light microscopy and scanning electron microscopy (SEM) of bone cross-sections, we show that this bone is hypermineralized, containing abundant small pores around 1-5 μm in diameter, lacunae around 10-20 μm as well as larger spaces. This bone does not possess the typical lamellar motif or other repeating structures normally found in cortical or trabecular mammalian bone. We also use high resolution focused ion beam scanning electron microscopy (FIB-SEM) in the serial surface mode to image the 3D organization of the demineralized bone matrix. We show that the upper furcation bone matrix has a disordered isotropic structure composed mainly of individual collagen fibrils with no preferred orientation, as well as highly staining material that is probably proteoglycans. Much larger aligned arrays of collagen fibers - presumably Sharpey's fibers - are embedded in this material. This unusual furcation bone material is similar to the disordered material found in human lamellar bone. In the upper furcation region this disordered bone comprises almost all the volume excluding Sharpey's fibers. We surmise that this most unusual bone type functions to resist the repeating compressive loads incurred by molars during mastication.

Ultrastructure of Bone: Hierarchical Features from Nanometer to Micrometer Scale Revealed in Focused Ion Beam Sections in the TEM

The ultrastructure of bone has been widely debated, in part due to limitations in visualizing nanostructural features over relevant micrometer length scales. Here, we employ the high resolving power and compositional contrast of high-angle annular dark-field scanning transmission electron microscopy (HAADF STEM) to investigate new features in human bone with nanometer resolution over microscale areas. Using focused ion beam (FIB)-milled sections that span an area of 50 μm², we have shown how most of the mineral of cortical human osteonal bone occurs in the form of long, thin polycrystalline plates (mineral lamellae, MLs) which are either flat or curved to wrap closely around collagen fibrils. Close to the collagen fibril (< 20 nm), the radius of curvature matches that of the fibril diameter, while at greater distances, MLs form arcs with much larger radii of curvature. In addition, stacks of closely packed planar (uncurved) MLs occur between fibrils. The curving of mineral lamellae both around and between the fibrils would contribute to the strength of bone. At a larger scale, rosette-like clusters of fibrils are noted for the first time, arranged in quasi-circular arrays that define tube-like structures in alternating osteonal lamellae. At the boundary between adjacent osteonal lamellae, the orientation of fibrils and surrounding mineral lamellae changes abruptly, resembling the "orthogonal" patterns identified by others (Reznikov et al. in Acta Biomater 10:3815-3826, 2014). These features spanning nanometer to micrometer scale have implications for our understanding of bone structure and mechanical integrity.

Collagens of Poriferan Origin

The biosynthesis, structural diversity, and functionality of collagens of sponge origin are still paradigms and causes of scientific controversy. This review has the ambitious goal of providing thorough and comprehensive coverage of poriferan collagens as a multifaceted topic with intriguing hypotheses and numerous challenging open questions. The structural diversity, chemistry, and biochemistry of collagens in sponges are analyzed and discussed here. Special attention is paid to spongins, collagen IV-related proteins, fibrillar collagens from demosponges, and collagens from glass sponge skeletal structures. The review also focuses on prospects and trends in applications of sponge collagens for technology, materials science and biomedicine.