Raman spectroscopy compared against traditional predictors of shear force in lamb m. longissimus lumborum

Prediction of tenderness in bovine longissimus thoracis et lumborum muscles using Raman spectroscopy

OBJECTIVE

This study was conducted to evaluate Raman spectroscopy technique as a noninvasive tool to predict meat quality traits on Braford longissimus thoracis et lumborum muscle.

METHODS

Thirty samples of muscle from Braford steers were analyzed by classical meat quality techniques and by Raman spectroscopy with 785 nm laser excitation. Water holding capacity (WHC), intramuscular fat content (IMF), cooking loss (CL), and texture profile analysis recording hardness, cohesiveness, and chewiness were determined, along with fiber diameter and sarcomere length by scanning electron microscopy. Warner-Bratzler shear force (WBSF) analysis was used to differentiate tender and tough meat groups.

RESULTS

Higher values of cohesiveness and CL, together with lower values of WHC, IMF, and shorter sarcomere were obtained for tender meat samples than for the tougher ones. Raman spectra analysis allows tender and tough sample differentiation. The correlation between the quality attributes predicted by Raman and the physical measurements resulted in values of R2 = 0.69 for hardness and 0,58 for WBSF. Pearson's correlation coefficient of hardness (r = 0.84) and WBSF (r = 0.79) parameters with the phenylalanine Raman signal at 1,003 cm-1, suggests that the content of this amino acid could explain the differences between samples.

CONCLUSION

Raman spectroscopy with 785 nm laser excitation is a suitable and accurate technique to identify beef with different quality attributes.

There is no relationship between lamb particle size and consumer scores for tenderness, flavour, juiciness, overall liking or quality rank

With the aim to define an objective threshold for consumer satisfaction, this study investigated the relationship between lamb particle size data and consumer scores for tenderness, juiciness, flavour and overall liking (sensorial properties). Data were sourced from the longissimus lumborum muscles of 273 Australian Merino lambs, these being aged for 5-d and then analysed for particle size and sensorial properties - the latter using untrained consumer sensory panels. Pearson's correlation and principal component analyses identified no significant relationship between particle size and consumer sensory scores. Linear regression models found the sensorial properties of lamb could not be predicted using particle size, indicating no univariate relationship. Further, a backwards stepwise regression analysis found there to be no multivariate or univariate relationship between the sensorial properties of lamb and its particle size. These findings demonstrate that there is little value in defining a particle size threshold for consumer satisfaction based on the sensorial properties of lamb.

Prediction of carcass composition and meat and fat quality using sensing technologies: A review

Consumer demand for high-quality healthy food is increasing,  thus meat processors require the means toassess these rapidly, accurately, and inexpensively. Traditional methods forquality assessments are time-consuming, expensive, invasive, and have potentialto negatively impact the environment. Consequently, emphasis has been put onfinding non-destructive, fast, and accurate technologies for productcomposition and quality evaluation. Research in this area is advancing rapidlythrough recent developments in the areas of portability, accuracy, and machinelearning. The present review, therefore, critically evaluates and summarizes developmentsof popular non-invasive technologies (i.e., from imaging to spectroscopicsensing technologies) for estimating beef, pork, and lamb composition andquality, which will hopefully assist in the implementation of thesetechnologies for rapid evaluation/real-timegrading of livestock products in the nearfuture.

Rapid discrimination of intact beef, venison and lamb meat using Raman spectroscopy

With increasing demand for fast and reliable techniques for intact meat discrimination, we explore the potential of Raman spectroscopy in combination with three chemometric techniques to discriminate beef, lamb and venison meat samples. Ninety (90) intact red meat samples were measured using Raman spectroscopy, with the acquired spectral data preprocessed using a combination of rubber-band baseline correction, Savitzky-Golay smoothing and standard normal variate transformation. PLSDA and SVM classification were utilized in building classification models for the meat discrimination, whereas PCA was used for exploratory studies. Results obtained using linear and non-linear kernel SVM models yielded sensitivities of over 87 and 90 % respectively, with the corresponding specificities above 88 % on validation against a test set. The PLSDA model yielded over 80 % accuracy in classifying each of the meat specie. PLSDA and SVM classification models in combination with Raman spectroscopy posit an effective technique for red meat discrimination.

Non-Destructive Imaging and Spectroscopic Techniques for Assessment of Carcass and Meat Quality in Sheep and Goats: A Review

In the last decade, there has been a significant development in rapid, non-destructive and non-invasive techniques to evaluate carcass composition and meat quality of meat species. This article aims to review the recent technological advances of non-destructive and non-invasive techniques to provide objective data to evaluate carcass composition and quality traits of sheep and goat meat. We highlight imaging and spectroscopy techniques and practical aspects, such as accuracy, reliability, cost, portability, speed and ease of use. For the imaging techniques, recent improvements in the use of dual-energy X-ray absorptiometry, computed tomography and magnetic resonance imaging to assess sheep and goat carcass and meat quality will be addressed. Optical technologies are gaining importance for monitoring and evaluating the quality and safety of carcasses and meat and, among them, those that deserve more attention are visible and infrared reflectance spectroscopy, hyperspectral imagery and Raman spectroscopy. In this work, advances in research involving these techniques in their application to sheep and goats are presented and discussed. In recent years, there has been substantial investment and research in fast, non-destructive and easy-to-use technology to raise the standards of quality and food safety in all stages of sheep and goat meat production.

Prediction of Warner-Bratzler shear force, intramuscular fat, drip-loss and cook-loss in beef via Raman spectroscopy and chemometrics

Rapid prediction of beef quality remains a challenge for meat processors. This study evaluated the potential of Raman spectroscopy followed by chemometrics for prediction of Warner-Bratzler shear force (WBSF), intramuscular fat (IMF), ultimate pH, drip-loss and cook-loss. PLS regression models were developed based on spectra recorded on frozen-thawed day 2 longissimus thoracis et lumborum muscle and validated using test sets randomly selected 3 times. With the exception of ultimate pH, models presented notable performance in calibration (R² ranging from 0.5 to 0.9; low RMSEC) and, despite variability in the results, promising predictive ability: WBSF (RMSEP ranging from 4.6 to 9 N), IMF (RMSEP ranging from 0.9 to 1.1%), drip-loss (RMSEP ranging from 1 to 1.3%) and cook-loss (RMSEP ranging from 1.5 to 2.9%). Furthermore, the loading values indicated that the physicochemical variation of the meat influenced the models. Overall, results indicated that Raman spectroscopy is a promising technique for routine quality assessments of IMF and drip-loss, which, with further development and improvement of its accuracy could become a reliable tool for the beef industry.

Predicting the Quality of Meat: Myth or Reality?

This review is aimed at providing an overview of recent advances made in the field of meat quality prediction, particularly in Europe. The different methods used in research labs or by the production sectors for the development of equations and tools based on different types of biological (genomic or phenotypic) or physical (spectroscopy) markers are discussed. Through the various examples, it appears that although biological markers have been identified, quality parameters go through a complex determinism process. This makes the development of generic molecular tests even more difficult. However, in recent years, progress in the development of predictive tools has benefited from technological breakthroughs in genomics, proteomics, and metabolomics. Concerning spectroscopy, the most significant progress was achieved using near-infrared spectroscopy (NIRS) to predict the composition and nutritional value of meats. However, predicting the functional properties of meats using this method-mainly, the sensorial quality-is more difficult. Finally, the example of the MSA (Meat Standards Australia) phenotypic model, which predicts the eating quality of beef based on a combination of upstream and downstream data, is described. Its benefit for the beef industry has been extensively demonstrated in Australia, and its generic performance has already been proven in several countries.

Critical Review on the Utilization of Handheld and Portable Raman Spectrometry in Meat Science

Traditional methods for the determination of meat quality-relevant parameters are rather time-consuming and destructive, whereas spectroscopic methods offer fast and non-invasive measurements. This review critically deals with the application of handheld and portable Raman devices in the meat sector. Some published articles on this topic tend to convey the impression of unrestricted applicability of mentioned devices in this field of research. Furthermore, results are often subjected to over-optimistic interpretations without being underpinned by adequate test set validation. On the other hand, deviations in reference methods for meat quality assessment and the inhomogeneity of the meat matrix pose a challange to Raman spectroscopy and multivariate models. Nonetheless, handheld and portable Raman devices show considerable potential for some applications in the meat sector.

Advances in Sheep and Goat Meat Products Research

The main goal of this chapter was to review the state of the art in the recent advances in sheep and goat meat products research. Research and innovation have been playing an important role in sheep and goat meat production and meat processing as well as food safety. Special emphasis will be placed on the imaging and spectroscopic methods for predicting body composition, carcass and meat quality. The physicochemical and sensory quality as well as food safety will be referenced to the new sheep and goat meat products. Finally, the future trends in sheep and goat meat products research will be pointed out.

Predicting aged pork quality using a portable Raman device

The utility of Raman spectroscopic signatures of fresh pork loin (1 d & 15 d postmortem) in predicting fresh pork tenderness and slice shear force (SSF) was determined. Partial least square models showed that sensory tenderness and SSF are weakly correlated (R² = 0.2). Raman spectral data were collected in 6 s using a portable Raman spectrometer (RS). A PLS regression model was developed to predict quantitatively the tenderness scores and SSF values from Raman spectral data, with very limited success. It was discovered that the prediction accuracies for day 15 post mortem samples are significantly greater than that for day 1 postmortem samples. Classification models were developed to predict tenderness at two ends of sensory quality as "poor" vs. "good". The accuracies of classification into different quality categories (1st to 4th percentile) are also greater for the day 15 postmortem samples for sensory tenderness (93.5% vs 76.3%) and SSF (92.8% vs 76.1%). RS has the potential to become a rapid on-line screening tool for the pork producers to quickly select meats with superior quality and/or cull poor quality to meet market demand/expectations.

Prediction of intramuscular fat content and major fatty acid groups of lamb M. longissimus lumborum using Raman spectroscopy

A hand held Raman spectroscopic device was used to predict intramuscular fat (IMF) levels and the major fatty acid (FA) groups of fresh intact ovine M. longissimus lumborum (LL). IMF levels were determined using the Soxhlet method, while FA analysis was conducted using a rapid (KOH in water, methanol and sulphuric acid in water) extraction procedure. IMF levels and FA values were regressed against Raman spectra using partial least squares regression and against each other using linear regression. The results indicate that there is potential to predict PUFA (R(2)=0.93) and MUFA (R(2)=0.54) as well as SFA values that had been adjusted for IMF content (R(2)=0.54). However, this potential was significantly reduced when correlations between predicted and observed values were determined by cross validation (R(2)cv=0.21-0.00). Overall, the prediction of major FA groups using Raman spectra was more precise (relative reductions in error of 0.3-40.8%) compared to the null models.

Non-destructively sensing pork quality using near infrared multispectral imaging technique

Near infrared multispectral imaging system based on three wavebands—1280 nm, 1440 nm and 1660 nm—was developed for the non-destructive sensing of the tenderness and water holding capacity of pork.