“Sandwich”-like structure modified anion exchange membrane with enhanced monovalent selectivity and fouling resistant

Bimetallic MOF nanoparticles decorated on polyacrylonitrile-based electrospun nanofiber membranes for synergistic antibacterial activity and organic dye adsorption

Electrospun nanofiber membranes functionalized with metal-organic framework (MOF) are considered as a promising materials for removal contaminants from wastewater. In this study, a bottom-up approach was proposed for the preparation bimetallic MOF based polyacrylonitrile (PAN) electrospun nanofiber membranes. Polydopamine (PDA)-modified PAN nanofiber membranes increased the anchoring of Co/Zn-MOF nanoparticles, further leading to the formation of Co/Zn-MOF@PDA-PAN nanofiber membranes with secondary growth method. With the increasing of 2-MIM concentration, the surface roughness and hydrophilicity of Co/Zn-MOF@PDA-PAN exhibited the increasing tendency. In addition, the antibacterials rates of Co/Zn-MOF@PDA-PAN were 59.6% and 64.9% against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) after 1h, rising to over 99.9% after 24h, demonstrating rapid and effective antibacterial activity. Importantly, membranes showed excellent anti-adhesion properties against two experimental strains. The release of ROS from Co/Zn-MOF could disrupt bacterial physiological activities, leading to their death, which could be the primary antibacterial mechanism of nanofiber membranes. The adsorption isotherm of MOF@PAN was characterized by the Langmuir model, showing a maximum adsorption capacity of 564 mg/g for SY, while kinetic data were best fitted with the pseudo-second-order model. The bimetallic MOF-based nanofiber membranes will be an effective and promising materials for antibacterial applications and water purification.

In Situ Photoactivated Antibacterial and Antioxidant Composite Materials to Promote Bone Repair

Trauma and tumor removal usually cause bone defects; in addition, the related postoperative infection also shall be carefully considered clinically. In this study, polylactic acid (PLLA) composite fibers containing Cerium oxide (CeO2) are first prepared by electrospinning technology. Then, the PLLA/CeO2@PDA/Ag composite materials are successfully prepared by reducing silver ion (Ag+) to nano-silver (AgNPs)  coating in situ and binding AgNPs to the materials surface by mussel structure liked polydopamine (PDA). In the materials, Ag+ can be slowly released in simulated body fluids. Based on the photothermal performance of AgNPs, the photothermal conversion efficiency of the materials is 21%, under NIR 808 nm illumination. The effective photothermal conversion can help materials fighting with E. coli and S. aureus in 3 h, with an antibacterial rate of 100%. Additionally, the sustained Ag+ release contributes to the antibacterial in long term. Meanwhile, the materials can mimic the bio-behavior of superoxide dismutase and catalase in decreasing the singlet oxygen level and removing the excess reactive oxygen species. Furthermore, the materials are beneficial for cell proliferation and osteogenic differentiation in vitro. In this study, a promising bone-regenerated material with high photothermal conversion efficiency and antibacterial and anti-oxidation properties, is successfully constructed.

Surface-Modified Pore-Filled Anion-Exchange Membranes for Efficient Energy Harvesting via Reverse Electrodialysis

In this study, novel pore-filled anion-exchange membranes (PFAEMs) modified with polypyrrole (PPy) and reduced graphene oxide (rGO) were developed to improve the energy harvesting performance of reverse electrodialysis (RED). The surface-modified PFAEMs were fabricated by varying the contents of PPy and rGO through simple spin coating and chemical/thermal treatments. It was confirmed that the PPy and PPy/rGO layers introduced on the membrane surface did not significantly increase the electrical resistance of the membrane and could effectively control surface characteristics, such as structural tightness, hydrophilicity, and electrostatic repulsion. The PPy/rGO-modified PFAEM showed excellent monovalent ion selectivity, more than four times higher than that of the commercial membrane (AMX, Astom Corp., Tokyo, Japan). This means that the PPy/rGO layer can effectively reduce the permeation of multivalent ions with a high charge intensity and a relatively large hydration radius compared to monovalent ions. The results of evaluating the performance of the surface-modified PFAEMs by applying them to a RED cell revealed that the decrease in potential difference occurring in the membrane was reduced by effectively suppressing the uphill transport of multivalent ions. Consequently, the PPy/rGO-modified membrane exhibited a 5.43% higher power density than the AMX membrane.

Integration of electrodialysis with renewable energy sources for sustainable freshwater production: A review

There is an increasing demand for clean water as the population of the earth is exponentially increasing. Many countries are facing water shortage problems, which are bound to become more prevalent in upcoming years. Therefore, it is necessary to investigate sustainable methods to produce clean water for drinking, irrigation, agriculture and domestic use. Electrodialysis uses electricity and specialized membranes to separate ionic substances from water. This practice can be used for desalination and wastewater treatment. To make the process more sustainable, electrodialysis can be coupled with renewable sources of energy such as solar and wind power. Photo-electrodialysis and photovoltaic-electrodialysis are two methods commonly used to couple solar energy with the electrodialysis process. However, these processes are dependent on the availability of sunlight and wind as weather conditions and the positioning of the sun vary by time. Electrodialysis is more favourable for brackish water desalination instead of seawater desalination as it has a lower energy requirement. Desalinating brackish water (1000-5000 ppm) has an energy requirement in the range of 0.4-4 kWh/m³. This review paper summarizes the fundamental concepts of electrodialysis technology and its integration with renewable energy sources such as photo electrodialysis, photovoltaic assisted electrodialysis, reversible electrodialysis/electrodialysis and wind energy-driven electrodialysis. Some aspects that have been considered are the freshwater capacity, specific energy and costs of the hybrid systems.

Tailoring the Surface Chemistry of Anion Exchange Membranes with Zwitterions: Toward Antifouling RED Membranes

Fouling is a pressing issue for harvesting salinity gradient energy with reverse electrodialysis (RED). In this work, antifouling membranes were fabricated by surface modification of a commercial anion exchange membrane with zwitterionic layers. Either zwitterionic monomers or zwitterionic brushes were applied on the surface. Zwitterionic monomers were grafted to the surface by deposition of a polydopamine layer followed by an aza-Michael reaction with sulfobetaine. Zwitterionic brushes were grafted on the surface by deposition of polydopamine modified with a surface initiator for subsequent atom transfer radical polymerization to obtain polysulfobetaine. As expected, the zwitterionic layers did increase the membrane hydrophilicity. The antifouling behavior of the membranes in RED was evaluated using artificial river and seawater and sodium dodecylbenzenesulfonate as the model foulant. The zwitterionic monomers are effective in delaying the fouling onset, but the further build-up of the fouling layer is hardly affected, resulting in similar power density losses as for the unmodified membranes. Membranes modified with zwitterionic brushes show a high potential for application in RED as they not only delay the onset of fouling but they also slow down the growth of the fouling layer, thus retaining higher power density outputs.

Modified Poly(acrylic acid)-Based Hydrogels for Enhanced Mainstream Removal of Ammonium from Domestic Wastewater

Rapid and continuous ammonium adsorption from mainstream coupled with side-stream ammonium recovery and adsorbent regeneration could enable ammonium recovery from domestic wastewater. This study describes the use of tailored poly(acrylic acid)-based (NaPAA) hydrogels as effective sorbents for ammonium removal from domestic wastewater. Modified NaPAA hydrogels having 60% ionization and 4.8 mol % N',N'-methylenebisacrylamide as the cross-linker reduced the overall swelling by 92% from 407 to 31 g/g because of higher cross-linking density. At hydrogel loadings of 2.5-7.5 g/L, the NaPAA hydrogels achieved ammonium concentrations of 8.3 ± 0.6 to 10.1 ± 0.1 mg/L NH₄-N, which corresponds to removal efficiencies of 53-77% after 10 min of contact time in real domestic wastewater. At the same hydrogel loadings, the ammonium removal efficiency of NaPAA hydrogels in synthetic wastewater was found to be comparable to that in real sewage (71% vs 69%, respectively), suggesting that the sorption performance is only marginally affected by organic constituents found in domestic wastewater. In addition, the NaPAA hydrogels removed 25-51% ammonium in 10 min from synthetic streams having 200-400% higher ionic strengths than those commonly observed in sewage. Furthermore, simulation studies showed that a discharge concentration of ∼1.9 mg/L NH₄-N, well below the commonly applied discharge limits in most regions, can be achieved using mainstream ammonium removal by NaPAA hydrogels followed by biological assimilation from the growth of ordinary heterotrophic organisms.

Surface Modifications of Anion Exchange Membranes for an Improved Reverse Electrodialysis Process Performance: A Review

Reverse electrodialysis (RED) technology represents a promising electro-membrane process for renewable energy harvesting from aqueous streams with different salinity. However, the performance of the key components of the system, that is, the ion exchange membranes, is limited by both the presence of multivalent ions and fouling phenomena, thus leading to a reduced generated net power density. In this context, the behavior of anion exchange membranes (AEMs) in RED systems is more severely affected, due to the undesirable interactions between their positively charged fixed groups and, mostly negatively charged, foulant materials present in natural streams. Therefore, controlling both the monovalent anion permselectivity and the membrane surface hydrophilicity is crucial. In this respect, different surface modification procedures were considered in the literature, to enhance the above-mentioned properties. This review reports and discusses the currently available approaches for surface modifications of AEMs, such as graft polymerization, dip coating, and layer-by-layer, among others, mainly focusing on preparing monovalent permselective AEMs with antifouling characteristics, but also considering hydrophilicity aspects and identifying the most promising modifying agents to be utilized. Thus, the present study aimed at providing new insights for the further design and development of selective, durable, and cost-effective modified AEMs for an enhanced RED process performance, which is indispensable for a practical implementation of this electro-membrane technology at an industrial scale.

Characterization of Poly(Acrylic) Acid-Modified Heterogenous Anion Exchange Membranes with Improved Monovalent Permselectivity for RED

The performance of anion-exchange membranes (AEMs) in Reverse Electrodialysis is hampered by both presence of multivalent ions and fouling phenomena, thus leading to reduced net power density. Therefore, we propose a monolayer surface modification procedure to functionalize Ralex-AEMs with poly(acrylic) acid (PAA) in order to (i) render a monovalent permselectivity, and (ii) minimize organic fouling. Membrane surface modification was carried out by putting heterogeneous AEMs in contact with a PAA-based aqueous solution for 24 h. The resulting modified membranes were firstly characterized by contact angle, water uptake, ion exchange capacity, fixed charge density, and swelling degree measurements, whereas their electrochemical responses were evaluated through cyclic voltammetry. Besides, their membrane electro-resistance was also studied via electrochemical impedance spectroscopy analyses. Finally, membrane permselectivity and fouling behavior in the presence of humic acid were evaluated through mass transport experiments using model NaCl containing solutions. The use of modified PAA-AEMs resulted in a significantly enhanced monovalent permselectivity (sulfate rejection improved by >35%) and membrane hydrophilicity (contact angle decreased by >15%) in comparison with the behavior of unmodified Ralex-AEMs, without compromising the membrane electro-resistance after modification, thus demonstrating the technical feasibility of the proposed membrane modification procedure. This study may therefore provide a feasible way for achieving an improved Reverse Electrodialysis process efficiency.

Design of Monovalent Ion Selective Membranes for Reducing the Impacts of Multivalent Ions in Reverse Electrodialysis

Reverse electrodialysis (RED) represents one of the most promising membrane-based technologies for clean and renewable energy production from mixing water solutions. However, the presence of multivalent ions in natural water drastically reduces system performance, in particular, the open-circuit voltage (OCV) and the output power. This effect is largely described by the “uphill transport” phenomenon, in which multivalent ions are transported against the concentration gradient. In this work, recent advances in the investigation of the impact of multivalent ions on power generation by RED are systematically reviewed along with possible strategies to overcome this challenge. In particular, the use of monovalent ion-selective membranes represents a promising alternative to reduce the negative impact of multivalent ions given the availability of low-cost materials and an easy route of membrane synthesis. A thorough assessment of the materials and methodologies used to prepare monovalent selective ion exchange membranes (both cation and anion exchange membranes) for applications in (reverse) electrodialysis is performed. Moreover, transport mechanisms under conditions of extreme salinity gradient are analyzed and compared for a better understanding of the design criteria. The ultimate goal of the present work is to propose a prospective research direction on the development of new membrane materials for effective implementation of RED under natural feed conditions.

Three-Dimensional Stable Cation-Exchange Membrane with Enhanced Mechanical, Electrochemical, and Antibacterial Performance by in Situ Synthesis of Silver Nanoparticles

In this study, a simple and facile approach was proposed to synthesize silver nanoparticles (AgNPs) loaded cation-exchange membranes (CEMs). A wide analytical study involving scanning electronic microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy was accomplished to corroborate that the in situ generated AgNPs were uniformly dispersed in the polymer matrix. In addition, as a result of the proposed synthesis strategy, the cross-linking structure inside the membrane was formed. The proper particle size and dispersibility of the AgNPs improved the mechanical properties of the membranes. Besides, the optimal AgNP-loaded CEM exhibited excellent bacterial killing activities against Gram-negative bacteria and showed a controlled improvement in the electrochemical performance of the prepared membranes. These effects were caused by the obtained distribution of AgNPs near ion-exchange groups that increased the aggregation of water molecules around them, improving the efficiency of ion transport due the formation of array broad ion-transport channels. The optimized CEM [sulfonated polysulfone (60SPSF)-C3#-Ag-2] exhibited an enhanced NaCl removal ratio of 67.5% with a high current efficiency (96.9%) and a low energy consumption (5.84 kWh kg^-1). The distance of the inhibition zone from the boundary of the membrane of SPSF-C3#-Ag-2 reached 4.8 mm. These results led us to suggest that the proposed synthesis strategy may have potential applications in the field of antibacterial and desalting ion-exchange membranes.

Mainstream Ammonium Recovery to Advance Sustainable Urban Wastewater Management

Throughout the 20th century, the prevailing approach toward nitrogen management in municipal wastewater treatment was to remove ammonium by transforming it into dinitrogen (N₂) using biological processes such as conventional activated sludge. While this has been a very successful strategy for safeguarding human health and protecting aquatic ecosystems, the conversion of ammonium into its elemental form is incompatible with the developing circular economy of the 21st century. Equally important, the activated sludge process and other emerging ammonium removal pathways have several environmental and technological limitations. Here, we assess that the theoretical energy embedded in ammonium in domestic wastewater represents roughly 38-48% of the embedded chemical energy available in the whole of the discharged bodily waste. The current routes for ammonium removal not only neglect the energy embedded in ammonium, but they can also produce N₂O, a very strong greenhouse gas, with such emissions comprising the equivalent of 14-26% of the overall carbon footprint of wastewater treatment plants. N₂O emissions often exceed the carbon emissions related to the electricity consumption for the process requirements of WWTPs. Considering these limitations, there is a need to develop alternative ammonium management approaches that center around recovery of ammonium from domestic wastewater rather than deal with its "destruction" into elemental dinitrogen. Current ammonium recovery techniques are applicable only at orders of magnitude above domestic wastewater strength, and so new techniques based on physicochemical adsorption are of particular interest. A new pathway is proposed that allows for mainstream ammonium recovery from wastewater based on physicochemical adsorption through development of polymer-based adsorbents. Provided adequate adsorbents corresponding to characteristics outlined in this paper are designed and brought to industrial production, this adsorption-based approach opens perspectives for mainstream continuous adsorption coupled with side-stream recovery of ammonium with minimal chemical requirements. This proposed pathway can bring forward an effective resource-oriented approach to upgrade the fate of ammonium in urban water management without generating hidden externalized environmental costs.

Codeposition Modification of Cation Exchange Membranes with Dopamine and Crown Ether To Achieve High K+ Electrodialysis Selectivity

Surface modification has been proven to be an effective approach for ion exchange membranes to achieve separation of counterions with different valences by altering interfacial construction of membranes to improve ion transfer performance. In this work, we have fabricated a series of novel cation exchange membranes (CEMs) by modifying sulfonated polysulfone (SPSF) membranes via codeposition of mussel-inspired dopamine (DA) and 4'-aminobenzo-15-crown-5 (ACE), followed by glutaraldehyde cross-linking, aiming at achieving selective separation of specific cations. The as-prepared membranes before and after modification were systematically characterized in terms of their structural, physicochemical, electrochemical, and electrodialytic properties. In the electrodialysis process, the modified membranes exhibit distinct perm selectivity to K⁺ ions in binary (K⁺/Li⁺, K⁺/Na⁺, K⁺/Mg²⁺) and ternary (K⁺/Li⁺/Mg²⁺) systems. In particular, at a constant current density of 5.0 mA·cm^-2, modified membrane M-co-0.50 shows significantly prominent perm selectivity [Formula: see text] in the K⁺/Mg²⁺ system and M-co-0.75 exhibits remarkable performance in the K⁺/Li⁺ system [Formula: see text], superior to commercial monovalent-selective CEM (CIMS, [Formula: see text], [Formula: see text]). Besides, in the K⁺/Li⁺/Mg²⁺ ternary system, K⁺ flux reaches 30.8 nmol·cm^-2·s^-1 for M-co-0.50, while it reaches 25.8 nmol·cm^-2·s^-1 for CIMS. It possibly arises from the effects of pore-size sieving and the synergistic action of electric field driving and host-guest molecular recognition of ACE and K⁺ ions. This study can provide new insights into the separation of specific alkali metal ions, especially on reducing influence of coexisting cations K⁺ and Na⁺ on Li⁺ ion recovery from salt lake and seawater.