Dual-layered nanocomposite membrane incorporating graphene oxide and halloysite nanotube for high osmotic power density and fouling resistance

Integration of Membrane-Based Pretreatment Methods with Pressure-Retarded Osmosis for Performance Enhancement: A Review

Osmotic energy provides an emerging renewable alternative by leveraging the salinity gradient between two solutions. Among these technologies, pressure-retarded osmosis (PRO) has attracted attention; however, its deployment is hindered by obstacles resulting from impurities in feed and draw solutions and lack of suitable membranes. This review explores the integration of membrane-based pretreatments with PRO, highlighting their influence on resolving the technical drawbacks of standalone PRO systems. Membrane-based pretreatments have shown considerable potential to overcome these challenges by improving the quality of water, reducing membrane fouling and enhancing its performance, and ultimately contributing to recovery of energy, resulting in higher power density. Additionally, the use of different nanomaterials has been proposed for membrane modification to optimize PRO performance. Moreover, the study investigates recent advancements in hybrid configurations for harnessing existing infrastructure and to enhance energy efficiency. Offering a comprehensive review on this integrated approach contributes to valuable insights for advancing membrane-based hybrid systems toward commercial viability. Consequently, investment in developing advanced computational modeling and experimental validation, utilization of advanced membrane materials with higher fouling resistance, and optimization of system configurations by using dual-stage and multi-stage designs are required to overcome these limitations.

Custom-designed 3D printed feed spacers and TFN membranes with MIL-101(Fe) for water recovery by forward osmosis

In this work, a dual-pronged approach- (i) novel thin-film nanocomposite polyether sulfone (PES) membrane with MIL-101 (Fe) and (ii) 3D printed spacers were explored to enhance water recovery by forward osmosis. The concentration of PES, pore former, draw solution, and MIL-101(Fe) was optimised for maximum pure water flux (PWF) and minimum specific reverse solute flux (SRSF). The best membrane exhibited a PWF of 7.52 Lm-2 h-1 and an SRSF of 0.33 ± 0.03 gL-1 using 1.5 M NaCl and DI water feed. The M22 membrane with the diamond-type spacer demonstrated a PWF of 2.53 Lm-2 h-1 and SRSF of 0.75 gL-1 for emulsified oily wastewater feed. The novel spacer design imparted significant turbulence to the feed flow and a lower foulant resistance of 1.3 m-1 as compared to the ladder type (1.5 m-1) or commercial spacer (1.7 m-1). This arrangement could recover 19% pure water within 12 h of operation (98% oil rejection) with a ∼ 94% flux recovery after hydraulic wash.

Recent advances in innovative osmotic membranes for resource enrichment and energy production in wastewater treatment

Wastewater is a valuable resource that we can no longer afford to overlook. By recovering the nutrients and metals it contains and generating renewable energy, we can not only meet the rising demands for natural resources but also create a more sustainable and resilient future. Forward osmosis (FO) membranes are one of the most intriguing resource recovery process technologies because of their high organic retention, economical energy usage, and straightforward operation. However, the widespread adoption of FO membranes on a full-scale basis is hindered by several issues with previous membrane products. These include limited selectivity to different types of ions, insufficient water flux, and high susceptibility to membrane fouling during extended periods of operation. Hence, it is essential to either invent new FO membranes or modify the existing ones. The objective of this work is to provide a comprehensive and organized review of up-to-date advancements in the development of innovative osmotic membrane (IOM) materials for resource recovery (RR) and energy production (EP). The paper covers several aspects, including the limitations of current osmotic membrane technologies, a review of new membranes specifically designed for effective RR/EP, their applications in various industrial fields, integrated IOM systems, recent improvements in IOM fabrication processes using artificial intelligence, and a discussion of the challenges and prospects of the potential research. In general, recently developed IOMs have proven to be highly efficient in recovering organics (>99 %), nutrients (>86 %), and precious metals (>90 %). These new membranes have also demonstrated an ability to effectively harvest osmotic energy (with power output ranging from 6 to 38 W/m2) by applied pressure in the range of 8 to 30 bar. These findings suggest that IOMs is promised for efficient resource recovery and renewable energy production.

Fluidics for energy harvesting: from nano to milli scales

A large amount of untapped energy sources surrounds us. In this review, we summarize recent works of water-based energy harvesting systems with operation scales ranging from miniature systems to large scale attempts. We focus particularly on the triboelectric energy, which is produced when a liquid and a solid come into contact, and on the osmotic energy, which is released when salt water and fresh water are mixed. For both techniques we display the state of the art understanding (including electrical charge separation, electro-osmotic currents and induced currents) and the developed devices. A critical discussion of present works confirms the significant progress of these water-based energy harvesting systems in all scales. However, further efforts in efficiency and performance amelioration are expected for these technologies to accelerate the industrialization and commercialization procedure.

The Need for Accurate Osmotic Pressure and Mass Transfer Resistances in Modeling Osmotically Driven Membrane Processes

The widely used van 't Hoff linear relation for predicting the osmotic pressure of NaCl solutions may result in errors in the evaluation of key system parameters, which depend on osmotic pressure, in pressure-retarded osmosis and forward osmosis. In this paper, the linear van 't Hoff approach is compared to the solutions using OLI Stream Analyzer, which gives the real osmotic pressure values. Various dilutions of NaCl solutions, including the lower solute concentrations typical of river water, are considered. Our results indicate that the disparity in the predicted osmotic pressure of the two considered methods can reach 30%, depending on the solute concentration, while that in the predicted power density can exceed over 50%. New experimental results are obtained for NanoH2O and Porifera membranes, and theoretical equations are also developed. Results show that discrepancies arise when using the van 't Hoff equation, compared to the OLI method. At higher NaCl concentrations (C > 1.5 M), the deviation between the linear approach and the real values increases gradually, likely indicative of a larger error in van 't Hoff predictions. The difference in structural parameter values predicted by the two evaluation methods is also significant; it can exceed the typical 50-70% range, depending on the operating conditions. We find that the external mass transfer coefficients should be considered in the evaluation of the structural parameter in order to avoid overestimating its value. Consequently, measured water flux and predicted structural parameter values from our own and literature measurements are recalculated with the OLI software to account for external mass transfer coefficients.

Recent development of pressure retarded osmosis membranes for water and energy sustainability: A critical review

With the goal of zero-liquid discharge and green energy harvest, extraction of abundant green energy from saline water via pressure retarded osmosis (PRO) technology is a promising but challenging issue for water treatment technologies to achieve water and energy sustainability. Development of high performance PRO membranes has received increased concerns yet still under controversy in practical applications. In this review, a comprehensive and up-to-date discussion of some key historical developments is first introduced covering the major advances of PRO engineering applications and novel membranes especially made in recent years. Then the critical performance indicators of PRO membranes including water flux and power density are briefly discussed. Subsequently, sufficient discussion on four performance limiting factors in PRO membrane and process is presented including concentration polarization, reverse solute diffusion, membrane fouling and mechanical stability. To fully address these issues, an updated insight is provided into recent major progresses on advanced fabrication and modification techniques of novel PRO membranes featuring enhanced performance with different configurations and materials, which are also reviewed in detail based on the viewpoint of design rationales. Afterwards, antifouling strategies and engineering applications are critically introduced. Finally, conclusions and future perspective of PRO membrane for practical operation are briefly discussed.

Graphene Oxide Incorporated Polysulfone Substrate for Flat Sheet Thin Film Nanocomposite Pressure Retarded Osmosis Membrane

This study focuses on the development of flat sheet thin film nanocomposite (TFN) pressure retarded osmosis (PRO) membranes for the enhancement of osmotic power generation by the incorporation of laboratory-synthesised graphene oxide (GO) into the polysulfone (PSf) polymer matrix. A series of membranes containing different weight percent of GO (0, 0.1, 0.25, 0.5 and 1.0 wt%) were fabricated via a phase inversion method with polyethylene glycol (PEG) as the pore forming agent. The results show that the TFN-0.25GO membrane has excellent water flux, salt reverse flux, high porosity and an enhanced microvoids morphology compared to the control membrane. The highest power density was achieved when TFN-0.25GO was used is 8.36 Wm⁻² at pressure >15 bar. It was found that the incorporation of GO into the polymer matrix has significantly improved the intrinsic and mechanical properties of the membrane.

Urine Treatment on the International Space Station: Current Practice and Novel Approaches

A reliable, robust, and resilient water recovery system is of paramount importance on board the International Space Station (ISS). Such a system must be able to treat all sources of water, thereby reducing resupply costs and allowing for longer-term space missions. As such, technologies able to dewater urine in microgravity have been investigated by different space agencies. However, despite over 50 years of research and advancements on water extraction from human urine, the Urine Processing Assembly (UPA) and the Water Processor Assembly (WPA) now operating on the ISS still achieve suboptimal water recovery rates and require periodic consumables resupply. Additionally, urine brine from the treatment is collected for disposal and not yet reused. These factors, combined with the need for a life support system capable of tolerating even dormant periods of up to one year, make the research in this field ever more critical. As such, in the last decade, extensive research was conducted on the adaptation of existing or emerging technologies for the ISS context. In virtue of having a strong chemical resistance, small footprint, tuneable selectivity and versatility, novel membrane-based processes have been in focus for treating human urine. Their hybridisation with thermal and biological processes as well as the combination with new nanomaterials have been particularly investigated. This article critically reviews the UPA and WPA processes currently in operation on the ISS, summarising the research directions and needs, highlighted by major space agencies, necessary for allowing life support for missions outside the Low Earth Orbit (LEO). Additionally, it reviews the technologies recently proposed to improve the performance of the system as well as new concepts to allow for the valorisation of the nutrients in urine or the brine after urine dewatering.

Factors Affecting the Performance of Membrane Osmotic Processes for Bioenergy Development

Forward osmosis (FO) and pressure-retarded osmosis (PRO) have gained attention recently as potential processes to solve water and energy scarcity problems with advantages over pressure-driven membrane processes. These processes can be designed to produce bioenergy and clean water at the same time (i.e., wastewater treatment with power generation). Despite having significant technological advancement, these bioenergy processes are yet to be implemented in full scale and commercialized due to its relatively low performance. Hence, massive and extensive research has been carried out to evaluate the variables in FO and PRO processes such as osmotic membrane, feed solutions, draw solutions, and operating conditions in order to maximize the outcomes, which include water flux and power density. However, these research findings have not been summarized and properly reviewed. The key parts of this review are to discuss the factors influencing the performance of FO and PRO with respective resulting effects and to determine the research gaps in their optimization with the aim of further improving these bioenergy processes and commercializing them in various industrial applications.

Polysulfone Membranes Embedded with Halloysites Nanotubes: Preparation and Properties

In the present study, nanocomposite ultrafiltration membranes were prepared by incorporating nanotubes clay halloysite (HNTs) into polysulfone (PSF) and PSF/polyvinylpyrrolidone (PVP) dope solutions followed by membrane casting using phase inversion method. Characterization of HNTs were conducted using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and thermogravimetric (TGA) analysis. The pore structure, morphology, hydrophilicity and mechanical properties of the composite membranes were characterized by using SEM, water contact angle (WCA) measurements, and dynamic mechanical analysis. It was shown that the incorporation of HNTs enhanced hydrophilicity and mechanical properties of the prepared PSF membranes. Compared to the pristine PSF membrane, results show that the total porosity and pore size of PSF/HNTs composite membranes increased when HNTs loadings were more than 0.5 wt % and 1.0 wt %, respectively. These findings correlate well with changes in water flux of the prepared membranes. It was observed that HNTs were homogenously dispersed within the PSF membrane matrix at HNTs content of 0.1 to 0.5 wt % and the PSF/HNTs membranes prepared by incorporating 0.2 wt % HNTs loading possess the optimal mechanical properties in terms of elastic modulus and yield stress. In the case of the PSF/PVP matrix, the optimal mechanical properties were obtained with 0.3 wt % of HNTs because PVP enhances the HNTs distribution. Results of bovine serum albumin (BSA) filtration tests indicated that PSF/0.2 wt % HNTs membrane exhibited high BSA rejection and notable anti-fouling properties.