pH-responsive nanofiltration membrane containing chitosan for dye separation

Gas-Responsive Smart Membrane Separation

Membrane separation technology is one of the most important techniques in modern separation science. To understand the self-regulation mechanisms of cell membranes and mimic their working principles, a plethora of artificial membranes with responsive abilities to external stimuli have been engineered and prepared, whose smart sieving functions continue to attract attention and are applied in various fields. Among all the known stimuli, gas as a new trigger mode exhibits certain biocompatibility and offer irreplaceable advantages compared to other stimuli, such as cleanliness, ease-of-handling, and nondestructive, which make gas-responsive membranes as one of the most promising, smart separation materials. In this review, we summarize recent breakthroughs in the development of gas-responsive membranes, outline the novel strategies on membrane fabrication, and highlight their advanced applications in controlled cargo release, size-/charge-based substance separation, oil-water separation, and self-cleaning. We also outlook the perspectives on the potential research directions and opportunities in the future.

Contaminated oily wastewater treatment using composite membrane adsorption reactor

Increased harmful pollutants emission into the environment poses a serious threat to the ecosystem and human health and mitigation of such problem has become a worldwide focus. In this research, the treatment of contaminated oily wastewater is investigated using a composite adsorptive membrane made of double-layer activated carbon-polymeric membranes shielded by a superhydrophilic (SHPI) porous material. The latter was prepared by immobilizing ZnO nanoparticles on stainless steel mesh using the spraying method. Using methylene blue dye and hexadecane as model contaminants, the composite membrane showed efficient pollutant adsorption as well as an almost total oil repellence by the SHPI material. Both experimental and theoretical studies of the adsorption characteristics were also conducted in a pilot-scale hybrid adsorptive membrane reactor using the prepared material. Estimation of the energy consumption in terms of electrical energy per order (EEO) was investigated and found much lower than that of nanofiltration (NF) for the treatment of dye-contaminated effluents. An order of magnitude estimation of treatment unit cost using the proposed approach was found to compare favorably with reported conventional wastewater treatment costs.

Enhancing mechanical properties of chitosan/PVA electrospun nanofibers: a comprehensive review

This review examines strategies to enhance the mechanical properties of chitosan/polyvinyl alcohol (PVA) electrospun nanofibers, recognized for their biomedical and industrial applications. It begins by outlining the fundamental properties of chitosan and PVA, highlighting their compatibility and mechanical characteristics. The electrospinning process is discussed, focusing on how various parameters and post-treatment methods influence fiber formation and performance. Key strategies for improvement are analyzed, including material modifications through blending and structural modifications like fiber orientation and multilayer constructions, and surface modifications such as coating and functionalization. The review also covers advanced characterization methods to evaluate mechanical properties and provides a comparative analysis of different enhancement approaches. Applications in biomedical and industrial contexts are explored, showcasing the versatility and innovation potential of these nanofibers. Finally, current challenges are addressed, and future research directions are proposed to overcome these obstacles and further enhance the mechanical properties of chitosan/PVA electrospun nanofibers, guiding their development for practical applications.

pH-responsive membranes: Mechanisms, fabrications, and applications

Understanding the mechanisms of pH-responsiveness allows researchers to design and fabricate membranes with specific functionalities for various applications. The pH-responsive membranes (PRMs) are particular categories of membranes that have an amazing aptitude to change their properties such as permeability, selectivity and surface charge in response to changes in pH levels. This review provides a brief introduction to mechanisms of pH-responsiveness in polymers and categorizes the applied polymers and functional groups. After that, different techniques for fabricating pH-responsive membranes such as grafting, the blending of pH-responsive polymers/microgels/nanomaterials, novel polymers and graphene-layered PRMs are discussed. The application of PRMs in different processes such as filtration membranes, reverse osmosis, drug delivery, gas separation, pervaporation and self-cleaning/antifouling properties with perspective to the challenges and future progress are reviewed. Lastly, the development and limitations of PRM fabrications and applications are compared to provide inclusive information for the advancement of next-generation PRMs with improved separation and filtration performance.

Construction of Smart Coatings Containing Core-Shell Nanofibers with Self-Healing and Active Corrosion Protection

With increasingly severe metal corrosion, coating preparation with high-performance corrosion protection has attracted more attention. Herein, the encapsulation of the corrosion inhibitor 8-hydroxyquinoline (8-HQ) as well as the self-healing agent linseed oil (LO) in polyvinyl alcohol (PVA) and chitosan (CS) shells were realized by coaxial electrospinning, which was recorded as PVA/CS@LO/8-HQ core-shell nanofibers. PVA/CS@LO/8-HQ nanofibers were employed to promote the high-performance corrosion protection of the epoxy coating. The anticorrosion mechanism was that the change of the local pH on the metal surface stimulated the release of 8-HQ from the nanofibers, which were then chelated with iron ions to form a complex. When cracks occurred and caused rupture of the nanofibers, LO was released and reacted with oxygen to cure them so that the cracks could be healed autonomously. The dynamic potential polarization curves showed that the corrosion inhibition efficiency of the compound inhibitor LO + 8-HQ reached 87.54%, 90.31%, and 85.57% at pH = 3, 7, and 11, respectively, higher than that of the single corrosion inhibitor. Density functional theory calculations revealed that the LO and 8-HQ combination, forming a hydrogen bond interaction, promoted the adsorption of inhibitors on the steel surface. Scanning Kelvin probe and electrochemical impedance spectroscopy proved the self-healing corrosion protection properties of the epoxy coating. These results demonstrated that embedding PVA/CS@LO/8-HQ nanofibers in the coating could obtain self-healing properties, and promote the mechanical and corrosion protection of epoxy coating.

Perfluorooctanoic acid-contaminated wastewater treatment by forward osmosis: Performance analysis

Perfluorooctanoic acid (PFOA) is a persistent compound, raising considerable global apprehension due to its resistance to breakdown and detrimental impacts on human health and aquatic environments. Pressure-driven membrane technologies treating PFAS-contaminated water are expensive and prone to fouling. This study presented a parametric investigation of the effectiveness of cellulose triacetate membrane in the forward osmosis (FO) membrane for removing PFOA from an aqueous solution. The study examined the influence of membrane orientation modes, feed pH, draw solution composition and concentration, and PFOA concentration on the performance of FO. The experimental results demonstrated that PFOA rejection was 99 % with MgCl2 and slightly >98 % with NaCl draw solutions due to the mechanism of PFOA binding to the membrane surface through Mg2+ ions. This finding highlights the crucial role of the draw solution's composition in PFOA treatment. Laboratory results revealed that membrane rejection of PFOA was 99 % at neutral and acidic pH levels but decreased to 95 % in an alkaline solution at pH 9. The decrease in membrane rejection is attributed to the dissociation of the membrane's functional groups, consequently causing pore swelling. The results were confirmed by calculating the average pore radius of the CTA membrane, which increased from 27.94 nm at pH 5 to 30.70 nm at pH 9. Also, variations in the PFOA concentration from 5 to 100 mg/L did not significantly impact the membrane rejection, indicating the process's capability to handle a wide range of PFOA concentrations. When seawater was the draw solution, the FO membrane rejected 99 % of PFOA concentrations ranging from 5 mg/L to 100 mg/L. The CTA FO treating PFOA-contaminated wastewater from soil remediation achieved a 90 % recovery rate and water flux recovery of 96.5 % after cleaning with DI water at 40 °C, followed by osmotic backwash. The results suggest the potential of using abundant and cost-effective natural solutions in the FO process, all without evident membrane fouling.

pH-triggered polydopamine-decorated nanocellulose membranes for continuously selective separation of organic dyes

Membrane separation technology has emerged as a powerful tool to separate organic dyes from industrial wastewater. However, continuously selective separation of organic dyes with similar molecular weight remains challenging. Herein, we presented a pH-triggered membrane composed of polydopamine-decorated tunicate-derived cellulose nanofibers (PDA@TCNFs) for selective separation of organic dyes. Such self-supporting membranes with nanoporous structure were fabricated by facile vacuum-assisted filtration of PDA@TCNF suspension. The incorporation of polydopamine not only enhanced the stability of the membranes, but also endowed membranes with excellent pH sensitivity, facilitating the continuously selective separation of organic dyes. These pH-triggered PDA@TCNF membranes could selectively separate Methyl Orange (MO) and Rhodamine B (RB) from the MO/RB mixed solution by switching the pH values. The continuously selective separation of the MO/RB mixed solution was demonstrated, where both MO and RB recovery ratios maintained at ∼99 % during 50 repeated cycles. This work provides a new strategy to develop a pH-triggered sustainable nanocellulose-based membrane for continuously selective separation of mixed dyes.

Highly effective ultrafiltration membranes based on plastic waste for dye removal from water

Applicable and low-cost ultrafiltration membranes based on waste polystyrene (WPS) blend and poly vinylidene fluoride (PVDF) were effectively cast on nonwoven support using phase inversion method. Analysis was done into how the WPS ratio affected the morphology and antifouling performance of the fabricated membranes. Cross flow filtration of pure water and various types of polluted aqueous solutions as the feed was used to assess the performance of the membranes. The morphology analysis shows that the WPS/PVDF membrane layer has completely changed from a spongy structure to a finger-like structure. In addition, the modified membrane with 50% WPS demonstrated that the trade-off between selectivity and permeability is met by a significant improvement in the rejection of the membrane with a reduction in permeate flux due to the addition of PVDF. With a water permeability of 50 LMH and 44 LMH, respectively, the optimized WPS-PVDF membrane with 50% WPS could reject 81% and 74% of Congo red dye (CR) and methylene blue dye (MB), respectively. The flux recovery ratio (FRR) reached to 88.2% by increasing PVDF concentration with 50% wt. Also, this membrane has the lowest irreversible fouling (Rir) value of 11.7% and lowest reversible fouling (Rr) value of 27.9%. The percent of cleaning efficiency reach to 71%, 90%, and 85% after eight cycles of humic acid (HA), CR, and MB filtration, respectively, for the modified PS-PVDF (50%-50%). However, higher PVDF values cause the membrane's pores to become clogged, increase the irreversible fouling, and decrease the cleaning efficiency. In addition to providing promising filtration results, the modified membrane is inexpensive because it was made from waste polystyrene, and as a result, it could be scaled up to treat colored wastewater produced by textile industries. PRACTITIONER POINTS: Recycling of plastic waste as an UF membrane for water/wastewater treatment was successfully prepared and investigated. Mechanical properties showed reasonable response with adding PVDF. The modified membrane with 50% PS demonstrated that the trade-off between selectivity and permeability is met by a significant improvement in the rejection.

Recent advances in membrane technologies applied in oil-water separation

Effective treatment of oily wastewater, which is toxic and harmful and causes serious environmental pollution and health risks, has become an important research field. Membrane separation technology has emerged as a key area of investigation in oil-water separation research due to its high separation efficiency, low costs, and user-friendly operation. This review aims to report on the advances in the research of various types of separation membranes around emulsion permeance, separation efficiency, antifouling efficiency, and stimulus responsiveness. Meanwhile, the challenges encountered in oil-water separation membranes are examined, and potential research avenues are identified.

Nanocellulose-based membranes with pH- and temperature-responsive pore size for selective separation

Smart gating membranes have drawn much attention due to the controllable pore structure. Herein, a smart gating membrane with dual responsiveness was prepared from bacteria cellulose (BC) grafted with pH- and temperature-responsive polymers. By external stimulation, the average pore size of the membrane can be controlled from 33.75 nm to 144.81 nm, and the pure water flux can be regulated from 342 to 2118 L·m-2·h-1 with remarkable variation in the pH range of 1-11 and temperature range of 20-60 °C. The adjustability of pore size is able to achieve the gradient selective separation of particles and polymers with different sizes. In addition, owing to the underwater superoleophobicity and the nanoscale pore structure, the membrane separation efficiencies of emulsified oils are higher than 99 %. Moreover, the controllable pore size endows the membrane with good self-cleaning performance. This nanocellulose-based smart gating membrane has potential applications in the fields of controllable permeation, selective separation, fluid transport, and drug/chemical controlled release systems.

Removal of cationic dyes from aqueous solution using polyacrylic acid modified hemp stem

Water pollution caused by dyes is a pressing environmental challenge due to their persistence and difficulty in degradation. Herein, an anionic adsorbent (HS-PAANa) was synthesized by grafting polyacrylic acid (PAA) onto the agricultural waste-hemp stem (HS). The obtained HS-PAANa adsorbent exhibited rapid adsorption kinetics, high adsorption capacity, and a favorable preference for cationic dyes, such as methylene blue (MB) and crystal violet (CV). The experimental data fit well with the pseudo-second-order kinetic model and Langmuir isotherm, demonstrating the efficiency of HS-PAANa in dye removal. Notably, the optimal adsorption capacities of HS-PAANa for MB and CV were found to be 1296.65 mg/g and 1451.43 mg/g, respectively. In the cationic/anionic dyes (MB/MO) binary systems, HS-PAANa exhibited enhanced selective adsorption of cationic dyes (MB), indicating its potential for targeted removal of specific dyes from mixed solutions. Moreover, HS-PAANa adsorption shows an excellent recyclability, after five cycles, HS-PAANa still maintained MB and CV removal rates of 93.85% and 95.08%, respectively. Therefore, the bioadsorbent HS-PAANa exhibits high potential as a highly efficient adsorbent for the effective treatment of cationic pollutants in wastewater.

Colloidal 2D Covalent Organic Framework-Tailored Nanofiltration Membranes for Precise Molecular Sieving

Covalent organic frameworks (COFs) with tunable pore sizes and ordered structures are ideal materials for engineering nanofiltration (NF) membranes. However, most of the COFs prepared by solvothermal synthesis are unprocessable powders and fail to form well-structured membranes, which seriously hinders the development of COF NF membranes. Herein, colloidal 2D-COFs with processable membrane formation ability were synthesized by oil-in-water emulsion interfacial polymerization technology. COF NF membranes with tailored thickness and surface charge were fabricated via a layer-by-layer (LBL) assembly strategy. The prepared COF NF membrane achieved precise sieving of dye molecules with high permeance (85 L·m-2·h-1·bar-1). In this work, the strategy of prepared COF NF membranes based on colloid 2D-COF LBL assembly is proposed for the first time, which provides a new idea for the on-demand design and preparation of COF membranes for precise molecular sieving.

Nanoremediation strategies to address environmental problems

A rapid rise in population, extensive anthropogenic activities including agricultural practices, up-scaled industrialization, massive deforestation, etc. are the leading causes of environmental degradation. Such uncontrolled and unabated practices have affected the quality of environment (water, soil, and air) synergistically by accumulating huge quantities of organic and inorganic pollutants in it. Environmental contamination is posing a threat to the existing life on the Earth, therefore, demands the development of sustainable environmental remediation approaches. The conventional physiochemical remediation approaches are laborious, expensive, and time-consuming. In this regard, nanoremediation has emerged as an innovative, rapid, economical, sustainable, and reliable approach to remediate various environmental pollutants and minimize or attenuate the risks associated with them. Owing to their unique properties such as high surface area to volume ratio, enhanced reactivity, tunable physical parameters, versatility, etc. nanoscale objects have gained attention in environmental clean-up practices. The current review highlights the role of nanoscale objects in the remediation of environmental contaminants to minimize their impact on human, plant, and animal health; and air, water, and soil quality. The aim of the review is to provide information about the applications of nanoscale objects in dye degradation, wastewater management, heavy metal and crude oil remediation, and mitigation of gaseous pollutants including greenhouse gases.

Modified poly(vinylidene fluoride) nanomembranes for dye removal from water - A review

Water contamination due to soluble synthetic dyes has serious concerns. Membrane-based wastewater treatments are emerging as a preferred choice for removing dyes from water. Poly(vinylidene fluoride) (PVDF)-based nanomembranes have gained much popularity due to their favorable features. This review explores the application of PVDF-based nanomembranes in synthetic dye removal through various treatments. Different fabrication methods to obtain high performance PVDF-based nanomembranes were discussed under surface coating and blending methods. Studies related to use of PVDF-based nanomembranes in adsorption, filtration, catalysis (oxidant activation, ozonation, Fenton process and photocatalysis) and membrane distillation have been elaborately discussed. Nanomaterials including metal compounds, metals, (synthetic/bio)polymers, metal organic frameworks, carbon materials and their composites were incorporated in PVDF membrane to enhance its performance. The advantages and limitations of incorporating nanomaterials in PVDF-based membranes have been highlighted. The influence of nanomaterials on the surface features, mechanical strength, hydrophilicity, crystallinity and catalytic ability of PVDF membrane was discussed. The conclusion of this literature review was given along with future research.

Interfacial Polymerization on Polyethersulfone Ultrafiltration Membrane to Prepare Nanofiltration Layers for Dye Separation

Nanofiltration membranes are of great significance to the treatment of dye wastewater. Interfacial polymerization is a widely used method to fabricate nanofiltration membranes. In this study, the interaction of tannic acid-assisted polyethylene polyamine (PEPA) with terephthalaldehyde (TPAL) was performed on PES ultrafiltration membranes using novel nitrogen-rich amine monomers and relatively less reactive aldehyde-based monomers. A new nanofiltration membrane ((T-P-T)/PES) was prepared by interfacial polymerization. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy were used to analyze the elemental composition, bonding state, and surface morphology of the membrane surface. The effects of the PEPA deposition time, TPAL concentration, interfacial reaction time, and curing time on the nanofiltration layer were investigated. The modified membrane, prepared under optimal conditions, showed strong dye separation ability. The permeation of the modified membrane could reach 68.68 L·m^-2·h^-1·bar^-1, and the rejection of various dyes was above 99%. In addition, the (T-P-T)/PES membrane showed good stability during long-term dye separation.

Barrier behaviour of partially N-acetylated chitosan layers in aqueous media

Chitosan coatings of 353 ± 12 nm thickness were prepared on glass and zinc substrates by dip-coating method to study their barrier-behaviour. The coatings were chemically modified to increase their degree of acetylation (DA) from ca. 44 % up to ca. 98 % resulting a quasi-chitin coating. The effect of the acetylation reaction was studied by infrared spectroscopy, and the structural changes of the native and acetylated coatings were investigated by UV-Vis spectrophotometry and X-ray diffraction. The surface properties of the coated samples were characterized by wettability measurements - advancing water contact angle decreased from ca. 80° (native) to ca. 43° (fully acetylated) - and microscopic (SEM, AFM) studies. The barrier behaviour of the chitosan layer depending on the DA was evaluated by electrochemical impedance spectroscopy studies and with a special mesoporous silica - chitosan bilayer system by measuring the amount of dye (Rhodamine 6G) accumulated in the silica through the chitosan coating during an impregnation step. These methods showed significant decrease in the barrier-effect of the coatings with increasing DA (accumulation of approximately six times more dye and a reduction of charge transfer resistance by an order of magnitude), due to the structural and ionization changes in the coatings.

Sulfonate-modified calixarene-based porous organic polymers for electrostatic enhancement and efficient rapid removal of cationic dyes in water

Developing of fast and efficient adsorbents for removal of low concentration refractory organics in water is significant. Herein, a novel calix[4]arene-based porous organic polymer CaPy is constructed through Sonogashira-Hagihara cross-coupling polycondensation. The strong polar sulfonate is further anchored onto the polymer skeleton of CaPy and three sulfonate-modified anionic polymers CaPy-S1, CaPy-S2, and CaPy-S3 were obtained and fully characterized. The adsorption isotherms showed that the maximum adsorption capacities of CaPy, CaPy-S1, CaPy-S2, and CaPy-S3 toward methylene blue (MB) were 270, 1454, 558 and 1381 mg g^-1, whereas those for Rhodamine B (RhB) were 183, 2653, 1132, and 1796 mg g^-1, respectively. The maximum adsorption capacity toward RhB was the highest reported vale among the currently used synthetic adsorbents. In addition, the pseudo-second-order rate constants of CaPy, CaPy-S1, CaPy-S2, and CaPy-S3 toward MB were 0.00572, 0.488, 2.24, and 0.192 g mg^-1 min^-1, respectively, and those toward RhB were 0.000234, 0.138, 0.0819, and 0.203 g mg^-1 min^-1, respectively. The pseudo-second-order rate constant of CaPy-S2 toward MB was 2.24 g mg^-1 min^-1 indicating one of the highest adsorption speeds. The activation energy of CaPy-S1 for RhB and MB were 121 and 109 kJ mol^-1, respectively, demonstrating that the adsorption of both dyes on CaPy-S1 was chemisorption process. Further, the obtained values of Gibbs free energy were negative, revealing that the adsorption process was spontaneous. This work provides an effective approach for improving adsorption performance via post-modification.

Solvothermal Synthesis, Structural Characterization and Optical Properties of Pr-Doped CeO2 and Their Degradation for Acid Orange 7

Pr-doped CeO₂ with different doping levels was prepared from Ce(NO₃)₃∙6H₂O and Pr(NO₃)₃∙6H₂O by solvothermal method without any additional reagents, in which the mixed solution of ethylene glycol and distilled water was employed as a solvent. The influences of Pr-doping on phase composition, crystal structure and morphology were investigated, as well as Pr valence and oxygen vacancy defects. The Pr cations entered into the CeO₂ crystal lattice with normal trivalence and formed a Pr-CeO₂ solid solution based on the fluorite structure. The larger trivalent Pr was substituted for tetravalent Ce in the CeO₂ crystal and compensated by oxygen vacancy defects, which caused the local lattice expansion of the crystal lattice. Moreover, the Pr-doped CeO₂ solid solutions exhibited visible color variation from bright cream via brick red to dark brown with the increasing of Pr contents. The degradation of AO7 dye was also investigated using a domestic medical ultraviolet lamp; the removal efficiency of AO7 by 1% and 2% Pr-doped CeO₂ approached 100%, much higher than 66.2% for undoped CeO₂.

Adsorption studies of the hybrid material obtained from the functionalization of silica with alfa and gamma cyclodextrins

The generation of residues containing dyes by industrial sectors has been mobilizing scientists to develop methodologies capable of treating water containing these contaminants. Adsorption is an option to remove these molecules from the aqueous medium and, for this study, the composites between silica and cyclodextrins alpha (α-CDSI) and gamma (γ-CDSI) were used to capture methylene blue. Adsorption was spontaneous for both composites (ΔG < 0) and characterized as exothermic and of a physical nature, with ΔH of -17.68 and -12.13 kJ mol^-1 for α-CDSI and γ-CDSI, respectively. Adsorption took place over a wide pH range, with an efficiency of approximately 96%, reaching equilibrium at 5 minutes. The adsorption kinetics was described by the pseudo-second-order model (R² > 0.999) and the adsorption isotherms showed that the process must occur mainly by dye complexation in the cyclodextrins cavities. The q_m values obtained were 210.8 and 205.2 mg g^-1 for α-CDSI and γ-CDSI, respectively; the Sips and Temkin models were the ones that best fit the experimental data. The deposition and interactions of the dye with the adsorbent surface were confirmed by the analysis of the IR spectra. Desorption studies showed that the material maintained its adsorption capacity of around 90% until the fourth adsorption/desorption cycle. Thus, the materials produced showed to efficiently remove methylene blue and that composite reuse is a viable process for application in dye removal.

Metal-polyphenol cross-linked titanium carbide membranes with stable interlayer spacing for efficient wastewater treatment

Membranes based on transition metal carbides/nitrides (MXenes) have significant water treatment potential because of their unique molecular sieving properties and excellent permeation performance. However, hydrophilic MXenes swell upon water immersion, and improving their stability remains challenging. In this study, a Fe³⁺-tannic acid (TA) complex was used as a cross-linker and surface modifier to prepare high-performance titanium carbide (Ti₃C₂T_x) MXene laminar membranes. Fe³⁺-TA formation on the nanosheets increased the interlayer spacing and stabilized the laminar structure. The membrane with the highest performance among the as-prepared membranes exhibited a high water permeance of 90.5 L/m^-2(-|-)h^-1 bar^-1 (which is twice that of the pristine Ti₃C₂T_x membrane) and good separation efficiency (methyl blue rejection rate: ∼99.8 %; Na₂SO₄ rejection rate: ∼5.0 %). Furthermore, the Fe³⁺-TA complex enhanced the membrane hydrophilicity, resulting in excellent antifouling properties. This study provides an environmentally friendly and facile method for fabricating two-dimensional loose nanofiltration membranes for textile wastewater treatment.

Ag/AgBr/AgVO3 Photocatalyst-Embedded Polyacrylonitrile/Polyamide/Chitosan Nanofiltration Membrane for Integrated Filtration and Degradation of RhB

A nanofiltration (NF) membrane containing a NaOH-treated electrospun polyacrylonitrile (HPAN) substrate, an interfacial polymerization (IP) polyamide (PA) layer, a chitosan (CS) coating layer, and an Ag/AgBr/AgVO₃ photocatalyst loading layer was prepared. The structural evolution of the membranes was investigated, and their performance was estimated in accordance with the water flux and rejection rate. A probable mechanism for the photocatalytic activity of Ag/AgBr/AgVO₃ was proposed. The loading of the Ag/AgBr/AgVO₃ heterojunction on the HPAN/PA/CS NF membrane endowed the membrane with excellent self-cleaning properties owing to the photolytic degradation of the dye. The filtration and degradation processes of the Ag/AgBr/AgVO₃-loaded membrane constantly promoted each other, and the treatment efficiency achieved with the integrated (filtration + degradation) process was superior to those obtained with the filtration and degradation processes alone. The Ag/AgBr/AgVO₃-NF membrane exhibited excellent recyclability and stability when subjected to five integrated filtration-degradation processes. In addition, the Ag/AgBr/AgVO₃-NF membrane exhibited an elastic modulus of 65.75 MPa and a toughness of 38.9 kJ/m³ along with a good disinfection effect on Escherichia coli in visible light. The as-prepared photocatalyst-loaded NF membrane with excellent antifouling performance, antimicrobial activity, high strength, and recyclability showed potential for continuous water purification operation.

High-Performance and Stable Two-Dimensional MXene-Polyethyleneimine Composite Lamellar Membranes for Molecular Separation

Two-dimensional (2D) materials are candidates for use in advanced molecular separation and water treatment. Among them, MXenes are cutting-edge two-dimensional (2D) materials with favorable properties such as high hydrophilicity, adjustable interlayer spacing, high mechanical strength, and structural stability. Therefore, they can be used to construct advanced lamellar membranes to ensure enhanced separation performance of modified membranes. Here, we prepared novel stable lamellar membranes through electrostatic attraction between polycation polyethyleneimine (PEI) and a negatively charged MXene, with hydrogen bond formation between their functional groups. By changing the pH of the suspension, the interlayer d-spacing of the prepared membrane could be altered to achieve precise molecular separation and ultrahigh organic solvent penetration. Furthermore, inserting PEI into the interlayer d-spacing of the membrane did not hinder the passage of water molecules. The prepared pH = 2-MXene-PEI membrane for dyes larger than 1.5 nm exhibited a rejection rate of greater than 96%, and the pH = 10-MXene-PEI membrane had a rejection rate of greater than 96% for dyes larger than 1.6 nm. In addition, the optimized MXene-PEI membranes showed channel stability. In this work, high-performance, stable, 2D MXene-PEI membranes with tunable nanochannels were developed. These membranes have great potential for use in precise molecular separation applications.

A Facile Co-Deposition Approach to Construct Functionalized Graphene Quantum Dots Self-Cleaning Nanofiltration Membranes

In this study, a novel photocatalytic self-cleaning nanofiltration (NF) membrane was fabricated by constructing aspartic acid-functionalized graphene quantum dots (AGQDs) into the polydopamine/polyethyleneimine (PDA/PEI) selective layer via the co-deposition method. The chemical composition, microstructure, and hydrophilicity of the prepared membranes were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), attenuated total reflection (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and water contact angle (WCA). Meanwhile, the effects of PEI molecular weight and AGQDs concentration on NF membrane structures and separation performance were systematically investigated. The photocatalytic self-cleaning performance of the PDA/PEI/AGQDs membrane was evaluated in terms of flux recovery rate. For constructing high-performance NF membranes, it is found that the optimal molecular weight of PEI is 10,000 Da, and the optimal concentration of AGQDs is 2000 ppm. The introduction of hydrophilic AGQDs formed a more hydrophilic and dense selective layer during the co-deposition process. Compared with the PDA/PEI membrane, the engineered PDA/PEI/AGQDs NF membrane has enhanced water flux (55.5 LMH·bar^-1) and higher rejection (99.7 ± 0.3% for MB). In addition, the PDA/PEI/AGQDs membrane exhibits better photocatalytic self-cleaning performance over the PDA/PEI membrane (83% vs. 69%). Therefore, this study provides a facile approach to construct a self-cleaning NF membrane.

Nano-Interlayers Fabricated via Interfacial Azo-Coupling Polymerization: Effect of Pore Properties of Interlayers on Overall Performance of Thin-Film Composite for Nanofiltration

The supporting layer of nanofiltration membranes is critical to the overall nanofiltration performance. However, conventional supports lack efficient surface porosity, which leads to the limited utilization rate of the polyamide (PA) layer. Herein a double-skin-layer nanofiltration membrane with porous organic polymer nanointerlayers prepared via a two-step interfacial polymerization technique is presented to investigate the effect of the interlayers' pore properties on the performance of the thin-film composite. Nanometer interlayers with different pore sizes are fabricated via interfacial azo-coupling polymerization. The pore properties of the nanointerlayer extremely influence the permeance, where a suitable pore size of 4.22 nm promotes pure water permeance of up to 32.2 L m^-2 h^-1 bar^-1, which is ∼3.8-fold greater than the membrane without an interlayer. However, an interlayer with 0.54 nm pores limits the performance (4.7 L m^-2 h^-1 bar^-1), which is even lower than the unmodified membrane (7.5 L m^-2 h^-1 bar^-1), because of the narrow pores and confined transport mode. However, the confined diffusion rate of amino monomers from the support to interface leads to a thinner PA layer of ∼45 nm and results in high flux. This work provides a facial route for the fabrication of interlayers and facilitate the design of high-performance membrane materials with interlayers.