Correction pen based paper fluidic device for the detection of multiple gene targets of Leptospira using Loop Mediated Isothermal Amplification

Digitally Controlled Printing of Bioink Barriers for Paper-Based Analytical Devices: An Environmentally Friendly One-Step Approach

The patterning of hydrophilic paper with hydrophobic materials has emerged as an interesting method for the fabrication of paper-based devices (PADs). Herein, we demonstrate a digitally automated, easy, low-cost, eco-friendly, and readily available method to create highly hydrophobic barriers on paper that can be promptly employed with PADs by simply using a bioink made with rosin, a commercially available natural resin obtained from conifer trees. The bioink can be easily delivered with the use of a ballpoint pen to produce water- and organic solvent-resistant barriers, showing superior properties when compared to other methods such as wax-printing or permanent markers. The approach enables the pen to be attached to a commercially available cutting printer to perform the semiautomated fabrication of hydrophobic barriers for PADs. With the aid of digitally controlled optimization, together with features of machine learning and design of experiments, we show a thorough investigation on the barrier strength that can be further adjusted to the desired application's needs. Then, we explored the barrier sturdiness across various uses, such as wide range aqueous pH sensing and the harsh acidic/organic conditions needed for the colorimetric detection of cholecalciferol.

A microfluidic fully paper-based analytical device integrated with loop-mediated isothermal amplification and nano-biosensors for rapid, sensitive, and specific quantitative detection of infectious diseases

Bacterial meningitis, an infection of the membranes (meninges) and cerebrospinal fluid (CSF) surrounding the brain and spinal cord, is one of the major causes of death and disability worldwide. Higher case-fatality rates and short survival times have been reported in developing countries. Hence, a quick, straightforward, and low-cost approach is in great demand for the diagnosis of meningitis. In this research, a microfluidic fully paper-based analytical device (μFPAD) integrated with loop-mediated isothermal amplification (LAMP) and ssDNA-functionalized graphene oxide (GO) nano-biosensors was developed for the first time for a simple, rapid, low-cost, and quantitative detection of the main meningitis-causing bacteria, Neisseria meningitidis (N. meningitidis). The results can be successfully read within 1 hour with the limit of detection (LOD) of 6 DNA copies per detection zone. This paper device also offers versatile functions by providing a qualitative diagnostic analysis (i.e., a yes or no answer), confirmatory testing, and quantitative analysis. These features make the presented μFPAD capable of a simple, highly sensitive, and specific diagnosis of N. meningitis. Furthermore, this microfluidic approach has great potential in the rapid detection of a wide variety of different other pathogens in low-resource settings.

A carbon-black-embedded poly(dimethylsiloxane)-paper hybrid device for energy-efficient nucleic-acid amplification in point-of-care testing

A paper-based device patterned with a carbon-black-poly(dimethylsiloxane) (PDMS) mixture is developed as a heating platform for nucleic-acid amplification tests. The photothermal effect of carbon black under 808 nm laser irradiation is used to conduct loop-mediated isothermal amplification (LAMP) to detect Escherichia coli (E. coli) O157:H7, a foodborne pathogen. We characterize the heat generation of carbon black by changing its concentration and the hardness of PDMS. Then, we optimize the minimum laser power required to perform LAMP. The proposed paper-based device requires less than 15 min to perform LAMP, and the result can be confirmed based on the color change observed by the naked eye. The rfbE gene of E. coli O157:H7 is specifically amplified, with a detection limit of 10² CFU mL^-1. Amplification is also performed by using a laboratory-made laser-diode device, which consumes only 2 W h during its operation. The low cost, disposability, and easy fabrication of the paper-based device make it a powerful tool for point-of-care testing.

When smartphone enters food safety: A review in on-site analysis for foodborne pathogens using smartphone-assisted biosensors

Pathogens are one of the supreme threats for the public health around the world in food supply chain. The on-site monitoring is an emerging trend for screening pathogens during the food processing and preserving. Traditional analytical tools have been unable to satisfy the current demands. Smartphones have enormous potentials for achieving on-site detection of foodborne pathogens, with intrinsic advantages such as small size, high accessibility, fast processing speed, and powerful imaging capacity. This review aims to synthesize the current advances in smartphone-assisted biosensors (SABs) for sensing foodborne pathogens, and briefly put forward the problem that consist in the research. We present the role of nanotechnology and recognition modes targeting foodborne pathogens in SABs, and discuss the signal conversion platforms coupling with smartphone. The challenges and perspectives in SABs are also proposed. The smartphone analytics area is moving forward, and it much be subject to careful quality standards and validation.

Naked-eye detection strategies coupled with isothermal nucleic acid amplification techniques for the detection of human pathogens

Nucleic acid amplification-based techniques have gained acceptance by the scientific, and general, community as reference methodologies for many different applications. Since the development of the gold standard of these techniques, polymerase chain reaction (PCR), back in the 1980s many improvements have been made, and alternative techniques emerged reporting improvements over PCR. Among these, isothermal amplification approaches resulted of particular interest as could overcome the need of specialized equipment to accurately control temperature changes, but it was after year 2000 that these techniques have flourished in a huge number of novel alternatives with many different degrees of complexities and requirements. An added value is their possibility to be combined with many different naked-eye detection strategies, simplifying the resources needed, allowing to reduce cost, and serving as the basis for novel developments of lab-on-chip systems, and miniaturized devices, for point-of-care testing. In this review, we will go over different types of naked-eye detection strategies, combined with isothermal amplification. This will provide the readers up-to-date information for them to select the most appropriate strategies depending on the particular needs and resources for their experimental setup.

Loop-Mediated Isothermal Amplification Detection of SARS-CoV-2 and Myriad Other Applications

As the second year of the COVID-19 pandemic begins, it remains clear that a massive increase in the ability to test for SARS-CoV-2 infections in a myriad of settings is critical to controlling the pandemic and to preparing for future outbreaks. The current gold standard for molecular diagnostics is the polymerase chain reaction (PCR), but the extraordinary and unmet demand for testing in a variety of environments means that both complementary and supplementary testing solutions are still needed. This review highlights the role that loop-mediated isothermal amplification (LAMP) has had in filling this global testing need, providing a faster and easier means of testing, and what it can do for future applications, pathogens, and the preparation for future outbreaks. This review describes the current state of the art for research of LAMP-based SARS-CoV-2 testing, as well as its implications for other pathogens and testing. The authors represent the global LAMP (gLAMP) Consortium, an international research collective, which has regularly met to share their experiences on LAMP deployment and best practices; sections are devoted to all aspects of LAMP testing, including preanalytic sample processing, target amplification, and amplicon detection, then the hardware and software required for deployment are discussed, and finally, a summary of the current regulatory landscape is provided. Included as well are a series of first-person accounts of LAMP method development and deployment. The final discussion section provides the reader with a distillation of the most validated testing methods and their paths to implementation. This review also aims to provide practical information and insight for a range of audiences: for a research audience, to help accelerate research through sharing of best practices; for an implementation audience, to help get testing up and running quickly; and for a public health, clinical, and policy audience, to help convey the breadth of the effect that LAMP methods have to offer.

Development of a High-Throughput Low-Cost Approach for Fabricating Fully Drawn Paper-Based Analytical Devices Using Commercial Writing Tools

This work reports the development and optimization of a rapid and low-cost pen-on-paper plotting approach for the fabrication of paper-based analytical devices (PADs) using commercial writing stationery. The desired fluidic patterns were drawn on the paper substrate with commercial marker pens using an inexpensive computer-controlled x–y plotter. For the fabrication of electrochemical PADs, electrodes were further deposited on the devices using a second x–y plotting step with commercial writing pencils. The effect of the fabrication parameters (type of paper, type of marker pen, type of pencil, plotting speed, number of passes, single- vs. double-sided plotting), the chemical resistance of the plotted devices to different solvents and the structural rigidity to multiple loading cycles were assessed. The analytical utility of these devices is demonstrated through application in optical sensing of total phenols using reflectance calorimetry and in electrochemical sensing of paracetamol and ascorbic acid. The proposed manufacturing approach is simple, low cost, flexible, rapid and fit-for-purpose and enables the fabrication of sub-“one-dollar” PADs with satisfactory mechanical and chemical resistance and good analytical performance.