The influence of sodium phosphate buffer on the stability of various proteins: Insights into protein-buffer interactions

Quantifying allergenic proteins using antibody-based methods or liquid chromatography-mass spectrometry/mass spectrometry: A review about the influence of food matrix, extraction, and sample preparation

Accurate quantification of allergens in food is crucial for ensuring consumer safety. Pretreatment steps directly affect accuracy and efficiency of allergen quantification. We systematically reviewed the latest advances in pretreatment steps for antibody-based methods and liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS) protein quantification methods in food. For antibody-based methods, the effects induced by food matrix like decreased allergen solubility, epitope masking, and nonspecific binding are of the upmost importance. To mitigate interference from the matrix, effective and proper extraction can be used to obtain the target allergens with a high protein concentration and necessary epitope exposure. Removal of interfering substances, extraction systems (buffers and additives), assistive technologies, and commercial kits were discussed. About LC-MS/MS quantification, the preparation of the target peptides is the crucial step that significantly affects the efficiency and results obtained from the MS detector. The advantages and limitations of each method for pre-purification, enzymatic digestion, and peptide desalting were compared. Additionally, the application characteristics of microfluidic-based pretreatment devices were illustrated to improve the convenience and efficiency of quantification. A promising research direction is the targeted development of pretreatment methods for complex food matrices, such as lipid-based and carbohydrate-based matrices.

Characteristics of a Spray-Dried Porcine Blood Meal for Aedes aegypti Mosquitoes

Research into mosquito-borne illnesses faces hurdles because feeding fresh animal blood to rear female mosquitoes presents logistical, economic, and safety challenges. In this study, a shelf-stable additive (spray-dried porcine blood; SDPB) hypothesized to supply accessible hemoglobin was evaluated within an alternative meal (AM) containing whey powder and PBS for rearing the yellow fever mosquito Aedes aegypti. LC-MS/MS proteomics, microbial assays, and particle reduction techniques confirmed and characterized the functionality of hemoglobin in SDPB, while engorgement, fecundity, egg viability, and meal stability bioassays assessed AM performance. Chemical assays supported hemoglobin as the phagostimulant in SDPB with aggregates partially solubilized in the AM that can be more accessible via particle reduction. Unpaired two-tailed t-tests indicate that the AM stimulates oogenesis (t11 = 13.6, p = 0.003) and is stable under ambient (1+ y; t12 = 0.576, p = 0.575) and aqueous (14 d; t12 = 0.515, p = 0.639) conditions without decreasing fecundity. Egg hatch rates for the ninth generation of AM-reared Ae. aegypti were 50-70+%. With further development, this meal may serve as a platform for mass rearing or studying effects of nutritional additives on mosquito fitness due to its low cost and stability. Future work may examine tuning spray drying parameters and resulting impacts on hemoglobin agglomeration and feeding.

Lipid matrix-specific pretreatment method for enhancing the extractability and allergenicity maintenance of bovine milk allergens in ELISA detection

The presence of various components in the food matrix makes allergen detection difficult and inaccurate, and pretreatment is an innovative breakthrough point. Food matrices were categorised based on their composition. Subsequently, a pretreatment method was established using a combination of ultrasound-assisted n-hexane degreasing and weakly alkaline extraction systems to enhance the detection accuracy of bovine milk allergens. Results showed that more allergens were obtained with less structural destruction, as demonstrated using immunological quantification and spectral analysis. Concurrently, allergenicity preservation was confirmed through liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis, a KU812 cell degranulation model, and western blotting. The method exhibited good accuracy (bias, 8.47%), repeatability (RSDr, 1.52%), and stability (RSDR, 5.65%). In foods with high lipid content, such as chocolate, the allergen content was 2.29-fold higher than that of commercial kits. Laser confocal scanning microscopy (LCSM) and scanning electron microscopy (SEM) analyses revealed a significant decrease in fat content after post-pretreatment using our method. In addition, colloidal stability surpassed that achieved using commercial kits, as indicated through the PSA and zeta potential results. The results demonstrated the superiority of the extractability and allergenicity maintenance of lipid matrix-specific pretreatment methods for improving the accuracy of ELISA based allergen detection in real food.

Wash-Free Bacterial Gram-Typing and Photodynamic Inactivation with Long-Chain-Tailed BODIPY Derivatives

The rapid identification of bacterial Gram types and their viability, as well as efficient bacterial elimination are crucial for managing bacterial infections yet present important challenges. In this research, we utilized long-chain-tailed BODIPY derivatives to address these hurdles. Our data indicated that these derivatives can distinguish bacteria types and their viability in aqueous solutions through a concise turn-on fluorescent response. Among them, B-8 stained both live and dead bacteria, and B-14 offered a wash-free staining. B-18 demonstrated the highest affinity to selectively fluorescent label viable gram-positive bacteria with a 53.2-fold fluorescent enhancement. Confocal imaging confirmed that B-18 can serve as an effective membrane-specific probe for facilitating the typing between gram-negative and gram-positive bacteria in a wash-free manner. Additionally, B-18 displayed selective photodynamic inactivation at 1 μM toward gram-positive bacteria. In vivo studies variformed the ideal photodynamic therapeutic efficacy of B-18 against methicillin-resistant Staphylococcus aureus in mice wound infections.

In vitro modelling of intramuscular injection site events

INTRODUCTION

Intramuscular (IM) injections deliver a plethora of drugs. The majority of IM-related literature details dissolution and/or pharmacokinetic (PK) studies, using methods with limited assessments of post-injection events that can impact drug fate, and absorption parameters. Food and Drug Association guidelines no longer require preclinical in vivo modeling in the U.S.A. Preclinical animal models fail to correlate with clinical outcomes, highlighting the need to study, and understand, IM drug fate in vitro using bespoke models emulating human IM sites. Post-IM injection events, i.e. underlying processes that influence PK outcomes, remain unacknowledged, complicating the application of in vitro methods in preclinical drug development. Understanding such events could guide approaches to predict and modulate IM drug fate in humans.

AREAS COVERED

This article reviews challenges in biorelevant IM site modeling (i.e. modeling drug fate outcomes), the value of technologies available for developing IM injectables, methods for studying drug fate, and technologies for training in performing IM administrations. PubMed, Web-of-Science, and Lens databases provided papers published between 2014 and 2024.

EXPERT OPINION

IM drug research is expanding what injectable therapeutics can achieve. However, post-injection events that influence PK outcomes remain poorly understood. Until addressed, advances in IM drug development will not realize their full potential.

Development and Validation of Miniaturized Assays to Assess Protein Techno-functional Properties

Techno-functional properties of protein isolates such as emulsification, foaming, and gelling serve as key indicators to determine their food applications. Conventional macro-volume techniques used to measure these techno-functional properties are usually time consuming, require large amounts of protein samples, and are impractical when diverse protein samples are handled at the early screening stage. To overcome these issues, we have developed scaled-down (miniaturized) assays to test techno-functional properties of protein samples. These assays are simple, efficient, and require <400 μl of protein solution. Specifically, the miniaturized emulsification and gelling assays require 25-fold less protein than conventional macro-volume techniques and the miniaturized foaming assay requires 100-fold less sample. The performance of these assays has been thoroughly validated using conventional techno-functional tests for each parameter. The protocols described herein offer high-throughput screening capabilities, accelerating the testing process for protein techno-functional properties and allowing for quick identification of samples of interest from diverse samples. © 2024 Wiley Periodicals LLC. Basic Protocol 1: Miniaturized emulsification assay Alternate Protocol 1: Conventional macro-volume emulsification assay Basic Protocol 2: Miniaturized foaming assay Alternate Protocol 2: Conventional macro-volume foaming assay Basic Protocol 3: Miniaturized gelling assay Alternate Protocol 3: Conventional macro-volume gelling assay.

Kinetic Study of the Esterase-like Activity of Albumin following Condensation by Macromolecular Crowding

The ability of bovine serum albumin (BSA) to form condensates in crowded environments has been discovered only recently. Effects of this condensed state on the secondary structure of the protein have already been unraveled as some aging aspects, but the pseudo-enzymatic behavior of condensed BSA has never been reported yet. This article investigates the kinetic profile of para-nitrophenol acetate hydrolysis by BSA in its condensed state with poly(ethylene) glycol (PEG) as the crowding agent. Furthermore, the initial BSA concentration was varied between 0.25 and 1 mM which allowed us to modify the size distribution, the volume fraction, and the partition coefficient (varying from 136 to 180). Hence, the amount of BSA originally added was a simple way to modulate the size and density of the condensates. Compared with dilute BSA, the initial velocity (vi) with condensates was dramatically reduced. From the Michaelis-Menten fits, the extracted Michaelis constant Km and the maximum velocity Vmax decreased in control samples without condensates when the BSA concentration increased, which was attributed to BSA self-oligomerization. In samples containing condensates, the observed vi was interpreted as an effect of diluted BSA remaining in the supernatants and from the condensates. In supernatants, the crowding effect of PEG increased the kcat and catalytic efficiency. Last, Vmax was proportional to the volume fraction of the condensates, which could be controlled by varying its initial concentration. Hence, the major significance of this article is the control of the size and volume fraction of albumin condensates, along with their kinetic profile using liquid-liquid phase separation.

Green Synthesis of Silver Nanoparticles Using Drymaria cordata and Their Biocompatibility with Hemoglobin: A Therapeutic Potential Approach

In this study, we present the synthesis and characterization of AgNPs using Drymaria cordata along with an assessment of their antioxidant, antibacterial, and antidiabetic activities. Antibacterial activities using four bacterial strains, free radical scavenging assays (DPPH and ABTS), and carbohydrate hydrolyzing enzyme inhibition assays were done to examine the therapeutic efficacy of AgNPs. Additionally, herein, we also evaluated the biocompatibility of the AgNPs using hemoglobin (Hb) as a model protein. A comprehensive analysis of Hb and AgNP interactions was carried out by using various spectroscopic, imaging, and size determination studies. Spectroscopic results showed that the secondary structure of Hb was not altered after its interaction with AgNPs. Furthermore, the thermal stability was also well maintained at different concentrations of nanoparticles. This study demonstrated a low-cost, quick, and eco-friendly method for developing AgNPs using D. cordata, and the biocompatible nature of AgNPs was also established. D. cordata-mediated AgNPs have potential applications against bacteria and diabetes and may be utilized for targeted drug delivery.

Endophyte Community Changes in the Seeds of Eight Plant Species following Inoculation with a Multi-Endophytic Bacterial Consortium and an Individual Sphingomonas wittichii Strain Obtained from Noccaea caerulescens

Noccaea caerulescens, a hyperaccumulator plant species known for its metal tolerance and accumulation abilities, harbours a microbiome of interest within its seed. These seed-associated bacteria, often referred to as seed endophytes, play a unique role in seed germination and plant growth and health. This work aimed to address how inoculating seeds of eight different plant species-Medicago sativa (alfalfa), Zea mays (corn), Raphanus sativus (radish), Helianthus annus (sunflower), Cucurbita pepo subsp. pepo (squash), Beta vulgaris subsp. cicla (rainbow chard), Arabidopsis thaliana (thale cress), and Noccaea caerulescens (penny cress)-with a bacterial consortium made from the seed endophytes of N. caerulescens would affect the seed microbiome of each test plant species, as well as inoculation with a strain of the bacterium Sphingomonas wittichii, which was previously isolated from seeds of N. caerulescens. Additionally, we aimed to offer preliminary plant tests in order to determine the best seed treatment plan for future research. The results showed that inoculation with the bacterial consortium held the most potential for increasing plant size (p < 0.001) and increasing germination rate (p < 0.05). The plant that responded best to inoculation was N. caerulescens (penny cress), likely because the microbes being introduced into the seed were not foreign. This paper also offers the first insight into the seed endophytes of Beta vulgaris subsp. cicla, highlighting an abundance of Proteobacteria, Firmicutes, and Actinobacteriota.

From cell factories to patients: Stability challenges in biopharmaceuticals manufacturing and administration with mitigation strategies

Active ingredients of biopharmaceuticals consist of a wide array of biomolecular structures, including those of enzymes, monoclonal antibodies, nucleic acids, and recombinant proteins. Recently, these molecules have dominated the pharmaceutical industry owing to their safety and efficacy. However, their manufacturing is hindered by high cost, inadequate batch-to-batch equivalence, inherent instability, and other quality issues. This article is an up-to-date review of the challenges encountered during different stages of biopharmaceutical production and mitigation of problems arising during their development, formulation, manufacturing, and administration. It is a broad overview discussion of stability issues encountered during product life cycle i.e., upstream processing (aggregation, solubility, host cell proteins, color change), downstream bioprocessing (aggregation, fragmentation), formulation, manufacturing, and delivery to patients.

A Novel Approach to Monitor the Concentration of Phosphate Buffers in the Range of 1 M to 0.1 M Using a Silicon-Based Impedance Sensor

We present a novel and easy approach using a silicon-based impedance chip to determine the concentration of the given aqueous buffer solution. An accurate determination of the post-dilution concentration of the buffers is necessary for ensuring optimal buffer capacity, pH stability, and to assess solution reproducibility. In this study, we focused on phosphate buffer as the test liquid to achieve precise post-dilution concentration determinations. The impedance chip consisting of a top gold ring electrode, where a test volume of 20 μL to 30 μL of phosphate buffer was introduced for impedance measurements within the frequency range of 40 Hz to 1 MHz. For impedance investigation, we used phosphate buffers with three different pH values, and the impedance was measured after diluting the phosphate buffers to a concentration of 1.00 M, 0.75 M, 0.50 M, 0.25 M, 0.10 M, 0.05 M, and 0.01 M. In order to analyze the distinctive changes in the measured impedance, an equivalent circuit was proposed and modeled. From the impedance modeling, we report that the circuit parameter RAu/Si showed exponential dependence on the concentration of phosphate buffer and no dependence on the pH values of the phosphate buffer and on the added volume inside the ring electrode. The proposed silicon-based impedance chip is quick and uses reduced liquid volume for post-dilution concentration measurements of buffers and has perspective applications in the pharmaceutical and biological domains for regulating, monitoring, and quality control of the buffers.

Cation and buffer specific effects on the DNA-lipid interaction

Knowledge of DNA - lipid layer interactions is key for the development of biosensors, synthetic nanopores, scaffolds, and gene-delivery systems. These interactions are strongly affected by the ionic composition of the solvent. We have combined quartz crystal microbalance (QCM) and ellipsometry measurements to reveal how pH, buffers and alkali metal chloride salts affect the interaction of DNA with lipid bilayers (DOTAP/DOPC 30:70 in moles). We found that the thickness of the DNA layer adsorbed onto the lipid bilayer decreased in the order citrate > phosphate > Tris > HEPES. The effect of cations on the thickness of the DNA layer decreased in the order (K⁺ > Na⁺ > Cs⁺ ∼ Li⁺). Rationalization of the experimental results requires that adsorption, due to cation specific charge screening, is driven by the simultaneous action of two mechanisms namely, the law of matching water affinities for kosmotropes (Li⁺) and ion dispersion forces for chaotropes (Cs⁺). The outcome of these two opposing mechanisms is a ^"bell-shaped" specific cations sequence. Moreover, a superimposed buffer specificity, which goes beyond the simple effect of pH regulation, further modulated cation specificity. In summary, DNA-lipid bilayer interactions are maximized if citrate buffer (50 mM, pH 7.4) and KCl (100 mM) are used.

Community Profiling of Seed Endophytes from the Pb-Zn Hyperaccumulator Noccaea caerulescens and Their Plant Growth Promotion Potential

Endophytes within plants are known to be crucial for plant fitness, and while their presence and functions in many compartments have been studied in depth, the research on seed endophytes is still limited. This work aimed to characterize the seed endophytic and rhizospheric bacterial community of two Noccaea caerulescens Pb-Zn hyperaccumulator populations, growing on two heavy-metal-polluted sites in Belgium. Cultured representatives were evaluated for their potential to enhance seed germination and root length of the model species Arabidopsis thaliana. The results indicated that the community structure within the seed is conserved between the two locations, comprising mainly of Proteobacteria (seeds), and Actinobacteria in the bulk soil. Root length of A. thaliana was significantly increased when inoculated with Sphingomonas vulcanisoli. The results of this paper offer insights into the importance of the selection of the core seed endophytic microbiome and highlight the precarious symbiotic relationship they have with the plant and seed.

Colorimetric Sensor Array for Identification of Proteins and Classification of Metabolic Profiles under Various Osmolyte Conditions

Rapid and efficient detection and identification of proteins hold great promise in medical diagnostics, treatment of different diseases, and proteomics. Here, we present a simple colorimetric sensor array for the differentiation of proteins in various osmolyte solutions. Osmolytes have different influences on the conformation of proteins, which have differential binding to silver nanoparticles, resulting in color changes. The sensor array shows unique color change patterns for each of the 19 proteins, allowing unambiguous identification. Very interestingly, the differentiation of 19 proteins is related to their molecular weight. Moreover, the sensor array can be used to identify protein mixtures, thermal denaturized proteins, and unknown protein samples. Finally, the sensor array can also analyze the plasma or liver samples of the four groups of salt-sensitive rats fed with different diets, indicating that it has the potential for the classification of metabolic profiles.

Fortification of thermal and structural stability of hemoglobin using choline chloride-based deep eutectic solvents

Of late, DESs have occupied the centre stage due to their eco-friendly and resource-efficient nature and their low toxicity. In this work, we have investigated the structural and thermal stability of hemoglobin (Hb) in two choline chloride ([Ch]Cl)-based DESs namely urea [Ch]Cl-urea (DES1) and [Ch]Cl-glycerol (Gly); (DES 2). Different biophysical techniques reveal that the presence of DESs facilitates the stability of Hb in a concentration-dependent manner and the extent of stability is more pronounced in [Ch]Cl-Gly as compared to [Ch]Cl-urea. Additionally, for a better understanding of the role of DESs in modulating the thermal and structural stability of Hb, studies have been performed on Hb in the presence of individual constituents of DESs, i.e., [Ch]Cl, urea, and Gly. Altogether, it was observed that the effect on the stability of Hb was by the presence of the DESs rather than their individual constituents. For instance, urea itself is a destabilizing co-solvent for biomolecules. However, the harmful effects of urea were surpassed when a DES is formed in the presence of [Ch]Cl. Therefore, overall, it can be concluded that both DESs can be described as potential non-harmful, green, and promising solvents for enhancing the structural and thermal stability of Hb.

Interaction of Atomically Precise Thiolated Copper Nanoclusters with Proteins: A Comparative Study

A facile synthesis of glutathione-stabilized copper nanoclusters (CuNCs) is carried out in H2O/ tetrahydrofuran medium. The photophysical and morphological studies performed with as-synthesized CuNCs revealed the formation of green-emissive, stable, and smaller nanoclusters. The precise composition of these as-synthesized CuNCs was predicted with the aid of electrospray ionization mass spectrometry analysis as Cu12(SG)9. Furthermore, the systematic studies of the interaction of synthesized CuNCs with three plasmatic proteins, namely, bovine serum albumin (BSA), lysozyme (Lys), and hemoglobin (Hb) have been performed by using a series of spectroscopic studies. The conformational changes in these proteins upon interacting with CuNCs and their binding stoichiometries have been investigated from the combination of UV-visible and steady-state fluorescence measurements. The changes in the microenvironment of proteins caused by CuNCs were investigated by circular dichroism spectroscopy. Among these three proteins, BSA and Lys had a minor effect on the luminescence of CuNCs, which makes them suitable candidates for biological applications. There are no drastic changes in the microenvironment of NCs as well as proteins because of the possibilities of weak electrostatic and H-bonding interactions of CuNCs with BSA and Lys. The feasibility of strong metallophic interaction between the Fe2+ present in the heme group of Hb and Cu(I) or -S atoms present in the CuNCs brings considerable changes in the photophysical activity of CuNCs and their interactions with Hb. The functional groups on NCs as well as active amino acid residues present in proteins play a crucial role in determining their interactions. This work shed a piece of knowledge on designing NCs for specific biological applications.

Investigation of Aggregation and Disaggregation of Self-Assembling Nano-Sized Clusters Consisting of Individual Iron Oxide Nanoparticles upon Interaction with HEWL Protein Molecules

In this paper, iron oxide nanoparticles coated with trisodium citrate were obtained. Nanoparticles self-assembling stable clusters were ~10 and 50-80 nm in size, consisting of NPs 3 nm in size. The stability was controlled by using multi-angle dynamic light scattering and the zeta potential, which was -32 ± 2 mV. Clusters from TSC-IONPs can be destroyed when interacting with a hen egg-white lysozyme. After the destruction of the nanoparticles and proteins, aggregates are formed quickly, within 5-10 min. Their sizes depend on the concentration of the lysozyme and nanoparticles and can reach micron sizes. It is shown that individual protein molecules can be isolated from the formed aggregates under shaking. Such aggregation was observed by several methods: multi-angle dynamic light scattering, optical absorption, fluorescence spectroscopy, TEM, and optical microscopy. It is important to note that the concentrations of NPs at which the protein aggregation took place were also toxic to cells. There was a sharp decrease in the survival of mouse fibroblasts (Fe concentration ~75-100 μM), while the ratio of apoptotic to all dead cells increased. Additionally, at low concentrations of NPs, an increase in cell size was observed.

De Novo Self-Assembling Peptides Mediate the Conversion of Temozolomide and Delivery of a Model Drug into Glioblastoma Multiforme Cells

Glioblastoma multiforme (GBM) is the most aggressive central nervous system tumor, and standard treatment, including surgical resection, radiation, and chemotherapy, has not significantly improved patient outcomes over the last 20 years. Temozolomide (TMZ), the prodrug most commonly used to treat GBM, must pass the blood–brain barrier and requires a basic pH to convert to its active form. Due to these barriers, less than 30% of orally delivered TMZ reaches the central nervous system and becomes bioactive. In this work, we have developed a novel biomaterial delivery system to convert TMZ to its active form and that shows promise for intracellular TMZ delivery. Self-assembling peptides were characterized under several different assembly conditions and evaluated for TMZ loading and conversion. Both solvent and method of assembly were found to affect the supramolecular and secondary structure of peptide assemblies. Additionally, as peptides degraded in phosphate-buffered saline, TMZ was rapidly converted to its active form. This work demonstrates that peptide-based drug delivery systems can effectively create a local stimulus during drug delivery while remaining biocompatible. This principle could be used in many future biomedical applications in addition to cancer treatment, such as wound healing and regenerative medicine.

Enzymatic Crosslinked Silk Fibroin Hydrogel for Biodegradable Electronic Skin and Pulse Waveform Measurements

The development of a portable, controllable, and environmentally friendly electronic skin (e-skin) is highly desirable; however, it presents a major challenge. Herein, a biocompatible, biodegradable, and easily usable hydrogel was designed and fabricated as e-skin to enable the transmission of information regarding the spatial pressure distribution. Silk fibroin (SF) was used as the hydrogel skeleton, which endowed the hydrogel with intelligent mechanical sensitivity. During its conditioning in weakly acidic media, the density of the enzymatic crosslink increased and a dense network was formed due to the formation of covalent/hydrogen bonds. Additionally, a conductive SF/polyvinyl alcohol (PVA) hybrid film was molded as a flexible electrode after graphite deposition. The above SF sensing unit based on SF hydrogels and SF/PVA hybrid films showed high strain sensitivity (4.78), fast responsiveness (<0.1 s), good cycling stability (≥10,000), excellent biocompatibility, and biodegradability. Importantly, a coplanar 8 × 8 pixel SF-based e-skin array was successfully fabricated and applied for 3D signal transmission of the object. The SF-based e-skin was capable of precisely tracking the changes in the pulse pressure, the movement of the finger joint, and the vibrations of the vocal cord. Therefore, the current findings provide a solid foundation for future studies exploring the next generation of electronic devices.

PEDOT-AuNPs-based impedimetric immunosensor for the detection of SARS-CoV-2 antibodies

Electrochemical sensors and biosensors are useful techniques for fast, inexpensive, sensitive, and easy detection of innumerous specimen. In face of COVID-19 pandemic, it became evident the necessity of a rapid and accurate diagnostic test, so the impedimetric immunosensor approach can be a good alternative to replace the conventional tests due to the specific antibody-antigen binding interaction and the fast response in comparison to traditional methods. In this work, a modified electrode with electrosynthesized PEDOT and gold nanoparticles followed by the immobilization of truncated nucleoprotein (N aa160-406aa) was used for a fast and reliable detection of antibodies against COVID-19 in human serum sample. The method consists in analyzing the charge-transfer resistance (R_CT) variation before and after the modified electrode comes into contact with the positive and negative serum sample for COVID-19, using [Fe(CN)₆]^3-/4- as a probe. The results show a linear and selective response for serum samples diluted in a range of 2.5 × 10³ to 20 × 10³. Also, the electrode material was fully characterized by Raman spectroscopy, transmission electron microscopy and scanning electron microscopy coupled with EDS, indicating that the gold nanoparticles were well distributed around the polymer matrix and the presence of the biological sample was confirmed by EDS analysis. EIS measurements allowed to differentiate the negative and positive samples by the difference in the R_CT magnitude, proving that the material developed here has potential properties to be applied in impedimetric immunosensors for the detection of SARS-CoV-2 antibodies in about 30 min.

A General Small-Angle X-ray Scattering-Based Screening Protocol for Studying Physical Stability of Protein Formulations

A fundamental step in developing a protein drug is the selection of a stable storage formulation that ensures efficacy of the drug and inhibits physiochemical degradation or aggregation. Here, we designed and evaluated a general workflow for screening of protein formulations based on small-angle X-ray scattering (SAXS). Our SAXS pipeline combines automated sample handling, temperature control, and fast data analysis and provides protein particle interaction information. SAXS, together with different methods including turbidity analysis, dynamic light scattering (DLS), and SDS-PAGE measurements, were used to obtain different parameters to provide high throughput screenings. Using a set of model proteins and biopharmaceuticals, we show that SAXS is complementary to dynamic light scattering (DLS), which is widely used in biopharmaceutical research and industry. We found that, compared to DLS, SAXS can provide a more sensitive measure for protein particle interactions, such as protein aggregation and repulsion. Moreover, we show that SAXS is compatible with a broader range of buffers, excipients, and protein concentrations and that in situ SAXS provides a sensitive measure for long-term protein stability. This workflow can enable future high-throughput analysis of proteins and biopharmaceuticals and can be integrated with well-established complementary physicochemical analysis pipelines in (biopharmaceutical) research and industry.

Production, isolation and characterization of C-phycocyanin from a new halo-tolerant Cyanobacterium aponinum using seawater

A halo-tolerant Cyanobacterium aponinum PCC 10605 was applied for the first time to produce high-level C-phycocyanin (C-PC). Combined with chemical extraction with sodium phosphate buffer and physical treatment using high pressure homogenization, a higher titer of C-PC was achieved. The culture conditions were optimized by mixing nitrate and ammonia ions, 2% carbon dioxide, and conditional light intensity. Thus, strain PCC10605 produced the highest titer C-PC of 0.652 g/g-DCW in the N1A2 medium with 10% light intensity and 16:8 light-period on day 7. PCC10605 accumulated 0.51 g-CPC/g-DCW at 20 g/L NaCl, while it grew normally in seawater with 30 g/L salinity, thus confirmed that PCC10605 was halo-tolerant strain. Besides, PCC10605 survived in 0.12 g/L phosphate medium that has never been reported. Finally, the purified C-PC exhibited DPPH, superoxide scavenging activity and antibacterial activity, which displayed 87.6%, and 18.7% removal of free radical, and 1.98 cm of inhibition zone for Escherichia coli.