Synthesis, structural and spectroscopic characterizations of maghemite γ-Fe2O3 prepared by one-step coprecipitation route

Green synthesis of iron oxide nanoparticles from Mexican prickly poppy (Argemone mexicana): assessing antioxidant activity for potential therapeutic use

This study presents an eco-friendly approach for synthesizing iron oxide nanoparticles using an extract from Argemone mexicana leaves, which function as reducing and stabilizing agents. The nanoparticles were thoroughly characterized using a range of techniques, including ultraviolet-visible (UV-vis) spectrophotometry, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and zeta potential analysis. The synthesized Fe-NPs demonstrated notable antioxidant activity, as confirmed by assays involving 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic) acid (ABTS) and 2,2-diphenyl-1-picrylhydrazyl (DPPH). The results highlight the significant antioxidant potential of these Fe-NPs. This research introduces a sustainable and innovative synthesis method for Fe-NPs, emphasizing their promising applications, particularly in fields related to antioxidant properties, as evidenced by the conducted antioxidant assays.

Cobalt Ferrite Synthesized Using a Biogenic Sol-Gel Method for Biomedical Applications

Cancer is one of the leading causes of death worldwide. Conventional treatments such as surgery, chemotherapy, and radiotherapy have limitations and severe side effects. Magnetic hyperthermia (MH) is an alternative method that can be used alone or in conjunction with chemotherapy or radiotherapy to treat cancer. Cobalt ferrite particles were synthesized using an innovative biogenic sol-gel method with powder of coconut water (PCW). The obtained powders were subjected to heat treatments between 500 °C and 1100 °C. Subsequently, they were characterized by thermal, structural, magnetic, and cytotoxic analyses to assess their suitability for MH applications. Through X-ray diffraction and Raman spectroscopy, it was possible to confirm the presence of the pure phase of CoFe2O4 in the sample treated at 1100 °C, exhibiting a saturation magnetization of 84 emu/g at 300 K and an average grain size of 542 nm. Furthermore, the sample treated at 1100 °C showed a specific absorption rate (SAR) of 3.91 W/g, and at concentrations equal to or below 5 mg/mL, is non-cytotoxic, being the most suitable for biomedical applications.

Coupling acid catalysis and selective oxidation over MoO3-Fe2O3 for chemical looping oxidative dehydrogenation of propane

Redox catalysts play a vital role in chemical looping oxidative dehydrogenation processes, which have recently been considered to be a promising prospect for propylene production. This work describes the coupling of surface acid catalysis and selective oxidation from lattice oxygen over MoO₃-Fe₂O₃ redox catalysts for promoted propylene production. Atomically dispersed Mo species over γ-Fe₂O₃ introduce effective acid sites for the promotion of propane conversion. In addition, Mo could also regulate the lattice oxygen activity, which makes the oxygen species from the reduction of γ-Fe₂O₃ to Fe₃O₄ contribute to selectively oxidative dehydrogenation instead of over-oxidation in pristine γ-Fe₂O₃. The enhanced surface acidity, coupled with proper lattice oxygen activity, leads to a higher surface reaction rate and moderate oxygen diffusion rate. Consequently, this coupling strategy achieves a robust performance with 49% of propane conversion and 90% of propylene selectivity for at least 300 redox cycles and ultimately demonstrates a potential design strategy for more advanced redox catalysts.

Green Synthesis of Fe3O4 Nanoparticles and Its Applications in Wastewater Treatment

In this paper, the extract of Citrus aurantium (CA) was used as a green approach for the preparation of Fe3O4 nanoparticles. The green Fe3O4 (Fe3O4/CA) was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy analysis (EDX), Fourier-transform infrared (FTIR) spectroscopy, Brunauer–Emmett–Teller (BET) surface area measurement, and vibrating sample magnetometry (VSM). The synthesized Fe3O4/CA was used to remove methylene blue (MB) dye from an aqueous solution. A four-factor central composite design (CCD), combined with response surface modeling (RSM), was used to maximize the MB dye removal. The four independent variables, which were initial dye concentration (10–50 mg/L), solution pH (3–9), adsorbent dose (ranging from 200–1000 mg/L), and contact time (30–90 min), were used as inputs to the model of the perecentage dye removal. The results yielded by an analysis of variance (ANOVA) confirmed the high significance of the regression model. The predicted values of the MB dye removal were in agreement with the corresponding experimental values. Optimized conditions for the maximum MB dye removal (93.14%) by Fe3O4/CA were the initial dye concentration (10.02 mg/L), pH (8.98), adsorbent mass (997.99 mg/L), and contact time (43.71 min). The validity of the quadratic model was examined, and good agreement was found between the experimental and predicted values. Our findings demonstrated that green Fe3O4NPs is a good adsorbent for MB removal.

Enhancement of Salmonella Enteritidis Detection Using Nanoparticle-Assisted Real-Time Polymerase Chain Reaction

Improved; fast; and specific detection of pathogens has always been of great importance; more so with the increase of human population and human interaction. In this work we investigate the application of metal oxide nanoparticles (ZnO; Fe2O3; and TiO2) in the detection of the pathogen Salmonella enteritidis using real-time quantitative PCR (qPCR). The nanoparticles were synthesized and characterized; and then they were added at different concentrations to qPCR for Salmonella enteritidis detection. qPCR provides numerical data such as threshold cycle (Ct); efficiency; and DNA yield which make comparing the different tested conditions easier and more accurate. It has been observed that adding all three types of NPs at an optimum concentration 4×10−11 M for ZnO NPs, and 4×10−9 for Fe2O3 and TiO2 nanoparticles has led to increasing the efficiency of the reaction to 100% and to lowering the threshold cycle value by up to 6.6 for ZnO nanoparticles; hence increasing the DNA yield of the reaction; and lowering the detection time of the pathogen by up to 50%.

Green Synthesis of Silver Nanoparticles Using Natural Extracts with Proven Antioxidant Activity

Natural extracts are a rich source of biomolecules that are useful not only as antioxidant drugs or diet supplements but also as complex reagents for the biogenic synthesis of metallic nanoparticles. The natural product components can act as strong reducing and capping substrates guaranteeing the stability of formed NPs. The current work demonstrates the suitability of extracts of Camellia sinensis, Ilex paraguariensis, Salvia officinalis, Tilia cordata, Levisticum officinale, Aegopodium podagraria, Urtica dioica, Capsicum baccatum, Viscum album, and marine algae Porphyra Yezoensis for green synthesis of AgNPs. The antioxidant power of methanolic extracts was estimated at the beginning according to their free radical scavenging activity by the DPPH method and reducing power activity by CUPRAC and SNPAC (silver nanoparticle antioxidant capacity) assays. The results obtained by the CUPRAC and SNAPC methods exhibited excellent agreement (R2~0.9). The synthesized AgNPs were characterized by UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), dynamic light scattering (DLS) particle size, and zeta potential. The UV-vis absorption spectra showed a peak at 423 nm confirming the presence of AgNPs. The shapes of extract-mediated AgNPs were mainly spherical, spheroid, rod-shaped, agglomerated crystalline structures. The NPs exhibited a high negative zeta potential value in the range from -49.8 mV to -56.1 mV, proving the existence of electrostatic stabilization. FTIR measurements indicated peaks corresponding to different functional groups such as carboxylic acids, alcohol, phenol, esters, ethers, aldehydes, alkanes, and proteins, which were involved in the synthesis and stabilization of AgNPs. Among the examined extracts, green tea showed the highest activity in all antioxidant tests and enabled the synthesis of the smallest nanoparticles, namely 62.51, 61.19, and 53.55 nm, depending on storage times of 30 min, 24 h, and 72 h, respectively. In turn, the Capsicum baccatum extract was distinguished by the lowest zeta potential, decreasing with storage time from -66.0 up to -88.6 mM.

Antioxidants: Classification, Natural Sources, Activity/Capacity Measurements, and Usefulness for the Synthesis of Nanoparticles

Natural extracts are the source of many antioxidant substances. They have proven useful not only as supplements preventing diseases caused by oxidative stress and food additives preventing oxidation but also as system components for the production of metallic nanoparticles by the so-called green synthesis. This is important given the drastically increased demand for nanomaterials in biomedical fields. The source of ecological technology for producing nanoparticles can be plants or microorganisms (yeast, algae, cyanobacteria, fungi, and bacteria). This review presents recently published research on the green synthesis of nanoparticles. The conditions of biosynthesis and possible mechanisms of nanoparticle formation with the participation of bacteria are presented. The potential of natural extracts for biogenic synthesis depends on the content of reducing substances. The assessment of the antioxidant activity of extracts as multicomponent mixtures is still a challenge for analytical chemistry. There is still no universal test for measuring total antioxidant capacity (TAC). There are many in vitro chemical tests that quantify the antioxidant scavenging activity of free radicals and their ability to chelate metals and that reduce free radical damage. This paper presents the classification of antioxidants and non-enzymatic methods of testing antioxidant capacity in vitro, with particular emphasis on methods based on nanoparticles. Examples of recent studies on the antioxidant activity of natural extracts obtained from different species such as plants, fungi, bacteria, algae, lichens, actinomycetes were collected, giving evaluation methods, reference antioxidants, and details on the preparation of extracts.

Iron Minerals Mediated Interfacial Hydrolysis of Chloramphenicol Antibiotic under Limited Moisture Conditions

Iron minerals are important soil components; however, little information is available for the transformation of antibiotics on iron mineral surfaces, especially under limited moisture conditions. In this study, we investigated the catalytic performance of four iron minerals (maghemite, hematite, goethite, and siderite) for the hydrolysis of chloramphenicol (CAP) antibiotic at different moisture conditions. All the iron oxides could efficiently catalyze CAP hydrolysis with the half-lives <6 days when the surface water content was limited, which was controlled by the atmospheric relative humidity of 33-76%. Different minerals exhibited distinctive catalytic processes, depending on the surface properties. H-bonding or Lewis acid catalysis was proposed for surface hydrolytic reaction on iron oxides, which however was almost completely inhibited when the surface water content was >10 wt % due to the competition of water molecules for surface reactive sites. For siderite, the CAP hydrolysis was resistant to excessive surface water. A bidentate H-bonding interaction mechanism would account for CAP hydrolysis on siderite. The results of this study highlight the importance of surface moisture on the catalytic performance of iron minerals. The current study also reveals a potential degradation pathway for antibiotics in natural soil, which has been neglected before.

Earliest known human burial in Africa

The origin and evolution of hominin mortuary practices are topics of intense interest and debate^1-3. Human burials dated to the Middle Stone Age (MSA) are exceedingly rare in Africa and unknown in East Africa^1-6. Here we describe the partial skeleton of a roughly 2.5- to 3.0-year-old child dating to 78.3 ± 4.1 thousand years ago, which was recovered in the MSA layers of Panga ya Saidi (PYS), a cave site in the tropical upland coast of Kenya^7,8. Recent excavations have revealed a pit feature containing a child in a flexed position. Geochemical, granulometric and micromorphological analyses of the burial pit content and encasing archaeological layers indicate that the pit was deliberately excavated. Taphonomical evidence, such as the strict articulation or good anatomical association of the skeletal elements and histological evidence of putrefaction, support the in-place decomposition of the fresh body. The presence of little or no displacement of the unstable joints during decomposition points to an interment in a filled space (grave earth), making the PYS finding the oldest known human burial in Africa. The morphological assessment of the partial skeleton is consistent with its assignment to Homo sapiens, although the preservation of some primitive features in the dentition supports increasing evidence for non-gradual assembly of modern traits during the emergence of our species. The PYS burial sheds light on how MSA populations interacted with the dead.

Effect of Morphologically Controlled Hematite Nanoparticles on the Properties of Fly Ash Blended Cement

Several types of hematite nanoparticles (α-Fe₂O₃) have been investigated for their effects on the structure and properties of fly ash (FA) blended cement. All synthesized nanoparticles were found to be of spherical shape, but of different particle sizes ranging from 10 to 195 nm depending on the surfactant used in their preparation. The cement hydration with time showed 1.0% α-Fe₂O₃ nanoparticles are effective accelerators for FA blended cement. Moreover, adding α-Fe₂O₃ nanoparticles in FA blended cement enhanced the compressive strength and workability of cement. Nanoparticle size and size distribution were important for optimal filling of various size of pores within the cement structure.

Antioxidant Functionalized Nanoparticles: A Combat against Oxidative Stress

Numerous abiotic stresses trigger the overproduction of reactive oxygen species (ROS) that are highly toxic and reactive. These ROS are known to cause damage to carbohydrates, DNA, lipids and proteins, and build the oxidative stress and results in the induction of various diseases. To resolve this issue, antioxidants molecules have gained significant attention to scavenge these free radicals and ROS. However, poor absorption ability, difficulty in crossing the cell membranes and degradation of these antioxidants during delivery are the few challenges associated with both natural and synthetic antioxidants that limit their bioavailability. Moreover, the use of nanoparticles as an antioxidant is overlooked, and is limited to a few nanomaterials. To address these issues, antioxidant functionalized nanoparticles derived from various biological origin have emerged as an important alternative, because of properties like biocompatibility, high stability and targeted delivery. Algae, bacteria, fungi, lichens and plants are known as the producers of diverse secondary metabolites and phenolic compounds with extraordinary antioxidant properties. Hence, these compounds could be used in amalgamation with biogenic derived nanoparticles (NPs) for better antioxidant potential. This review intends to increase our knowledge about the antioxidant functionalized nanoparticles and the mechanism by which antioxidants empower nanoparticles to combat oxidative stress.

Synthesis of Silica-Coated Fe3O4 Nanoparticles by Microemulsion Method: Characterization and Evaluation of Antimicrobial Activity

Magnetite and silica-coated magnetite (Fe₃O₄) nanoparticles (NPs) were synthesized by water-in-oil (W/O) microemulsion method from hydrated ferric nitrate, ferrous sulfate precursors and ammonia a precipitating agent with the assistance of Tween-80 and SDS surfactants. The synthesized materials were characterized by X-ray diffraction, scanning electron microscopy, thermal analyzer, and infrared spectroscopy. X-ray diffraction pattern of Fe₃O₄ showed that particles were phase pure with a cubic inverse spinel structure and FT-infrared spectra confirmed the presence of Fe-O bond in tetrahedral and octahedral interstitial sites. The crystallite size determined from powder XRD data with Scherer's equation was in the range of 7.3 ± 0.05 nm-10.83 ± 0.02 nm for uncoated Fe₃O₄ and 16 ± 0.14 nm for silica-coated Fe₃O₄ NPs. The SEM micrographs of the uncoated Fe₃O₄ oxide revealed the agglomeration of the magnetite (Fe₃O₄) particles. But the silica-coated Fe₃O₄ oxide exhibited homogeneous distribution of particles with relatively less agglomerate of the particles. The particle size of Fe₃O₄ NPs slightly increased with the temperature and precursor concentration. The antimicrobial activities of Fe₃O₄ and silica-coated Fe₃O₄ nanoparticles were tested against Gram-negative (Escherichia coli and Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus and Bacillus subtilis) bacteria. Both Fe₃O₄ and silica-coated Fe₃O₄ NPs demonstrated better antimicrobial activities.

Nondestructive Chemical Analysis of the Iron-Containing Protein Ferritin Using Raman Microspectroscopy

Ferritin is a ubiquitous intracellular iron storage protein of animals, plants, and bacteria. The cavity of this protein acts like a reaction chamber for natural formation and storage of nano-sized particles via biomineralization. Knowledge of the chemical composition and structure of the iron core is highly warranted in the fields of nano technologies as well as biomolecules and medicine. Here, we show that Raman microspectroscopy (RM) is a suitable nondestructive approach for an analysis of proteins containing such nano-sized iron oxides. Our approach addresses: (1) synthesis of suitable reference materials, i.e., ferrihydrite, maghemite and magnetite nanoparticles; (2) optimization of parameters for Raman spectroscopic analysis; (3) comparison of Raman spectra from ferritin with apoferritin and our reference minerals; and (4) validation of Raman analysis by X-ray diffraction and Mössbauer spectroscopy as two independent complementary approaches. Our results reveal that the iron core of natural ferritin is composed of the iron(III) hydroxide ferrihydrite (Fe₂O₃ ∙ 0.5 H₂O).

Nanoarchitectured peroxidase-mimetic nanozymes: mesoporous nanocrystalline α- or γ-iron oxide?

Next-generation nanozyme based biosensing: mesoporous nanocrystalline α- or γ-iron oxide?

Magnetic Au-Ag-γ-Fe₂O₃/rGO Nanocomposites as an Efficient Catalyst for the Reduction of 4-Nitrophenol

In this paper, a facile route has been developed to prepare magnetic trimetallic Au-Ag-γ-Fe₂O₃/rGO nanocomposites. The impact of the preparation method (the intensity of reductant) on the catalytic performance was investigated. The nanocomposites were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The prepared nanocomposites show fine catalytic activity towards the reduction reaction of 4-nitrophenol (4-NP). The nanocomposites also have superparamagnetism at room temperature, which can be easily separated from the reaction systems by applying an external magnetic field.

Mechanism of Novel K2SO4/KCl Composite Roasting Additive for Strengthening Vanadium Extraction from Vanadium–Titanium Magnetite Concentrate

In this paper, a novel K2SO4/KCl composite roasting additive was used to extract vanadium from vanadium–titanium magnetite concentrate. Further, the mechanism of K2SO4/KCl for extracting vanadium was studied. The results indicate that the vanadium leaching efficiency reached 82.04%, an increase of 7.43% compared to that of single K2SO4 and 10.05% compared to single KCl under the following conditions: a total dosage of K2SO4/KCl of 7 wt % with a mass ratio of 6/4, a roasting temperature of 950 °C, a roasting time of 1 h, a leaching temperature of 95 °C, a sulfuric acid concentration of 10% (v/v: volume percentage), and a leaching time of 1.5 h with a liquid-to-solid ratio of 3 mL/g. Moreover, crystal chemistry analyses indicated that the essence of the vanadium extraction with roasting was the conversion of cubic crystal systemic vanadium-bearing magnetite (FeO(Fe,V)2O3) to trigonal crystal systemic hematite (α-Fe2O3), and as most Fe(V)–O bonds were broken with the reconstructed conversion, the dissociation of V(III) occurred. Furthermore, the main decomposition products of K2SO4/KCl were K2O, SO2, and Cl2. X-ray diffraction (XRD) and related SEM-EDS analyses indicated that there were mainly three aspects in the mechanism of K2SO4/KCl for extracting vanadium. Firstly, activated K2O could combine with vanadium to generate soluble KVO3 rather insoluble Ca(VO3)2; secondly, SO2 could react with CaO to form CaSO4 to prevent the generation of acid-consuming Ca(VO3)2, which was beneficial to the dissolution of vanadium-bearing sphene (Ca(Ti,V)SiO4O); thirdly, Cl2 could destroy the structure of hematite (Fe2O3) to reduce its wrapping extent to KVO3.