1
|
Electrochemical and electrophoretic coatings of medical implants by nanomaterials. J Solid State Electrochem 2022. [DOI: 10.1007/s10008-022-05235-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/16/2022]
|
2
|
Suwardi A, Wang F, Xue K, Han MY, Teo P, Wang P, Wang S, Liu Y, Ye E, Li Z, Loh XJ. Machine Learning-Driven Biomaterials Evolution. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2102703. [PMID: 34617632 DOI: 10.1002/adma.202102703] [Citation(s) in RCA: 37] [Impact Index Per Article: 18.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/09/2021] [Revised: 07/09/2021] [Indexed: 06/13/2023]
Abstract
Biomaterials is an exciting and dynamic field, which uses a collection of diverse materials to achieve desired biological responses. While there is constant evolution and innovation in materials with time, biomaterials research has been hampered by the relatively long development period required. In recent years, driven by the need to accelerate materials development, the applications of machine learning in materials science has progressed in leaps and bounds. The combination of machine learning with high-throughput theoretical predictions and high-throughput experiments (HTE) has shifted the traditional Edisonian (trial and error) paradigm to a data-driven paradigm. In this review, each type of biomaterial and their key properties and use cases are systematically discussed, followed by how machine learning can be applied in the development and design process. The discussions are classified according to various types of materials used including polymers, metals, ceramics, and nanomaterials, and implants using additive manufacturing. Last, the current gaps and potential of machine learning to further aid biomaterials discovery and application are also discussed.
Collapse
Affiliation(s)
- Ady Suwardi
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, Innovis, #08-03, Singapore, 138634, Singapore
| | - FuKe Wang
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, Innovis, #08-03, Singapore, 138634, Singapore
| | - Kun Xue
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, Innovis, #08-03, Singapore, 138634, Singapore
| | - Ming-Yong Han
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, Innovis, #08-03, Singapore, 138634, Singapore
| | - Peili Teo
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, Innovis, #08-03, Singapore, 138634, Singapore
| | - Pei Wang
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, Innovis, #08-03, Singapore, 138634, Singapore
| | - Shijie Wang
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, Innovis, #08-03, Singapore, 138634, Singapore
| | - Ye Liu
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, Innovis, #08-03, Singapore, 138634, Singapore
| | - Enyi Ye
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, Innovis, #08-03, Singapore, 138634, Singapore
| | - Zibiao Li
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, Innovis, #08-03, Singapore, 138634, Singapore
| | - Xian Jun Loh
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, Innovis, #08-03, Singapore, 138634, Singapore
| |
Collapse
|
3
|
Electrodeposition Based Preparation of Zn–Ni Alloy and Zn–Ni–WC Nano-Composite Coatings for Corrosion-Resistant Applications. COATINGS 2021. [DOI: 10.3390/coatings11060712] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Zinc (Zn) is one of the five most widely consumed metals in the world. Indeed, more than 50% of all the zinc produced is used in zinc-galvanizing processes to protect steel from corrosion. Zn-based coatings have the potential for use as a corrosion-resistant barrier, but their wider use is restricted due to the poor mechanical properties of Zn that are needed to protect steel and other metals from rusting. The addition of other alloying elements such as Ni (Nickle) and WC (Tungsten Carbide) to Zn coating can improve its performance. This study investigates, the corrosion performance of Zn–Ni coating and Zn–Ni–WC composite nanocoatings fabricated on mild steel substrate in an environmentally friendly bath solution. The influence of WC nanoparticles on Zn–Ni deposition was also investigated. The surface morphologies, texture coefficients via XRD (X-ray diffraction), SEM (Scanning Electron Microscopy), and EDS (Energy-dispersive X-ray spectroscopy) were analyzed. The electrochemical test such as polarization curves (PC) and electrochemical impedance spectroscopy (EIS) resulted in a corrosion rate of 0.6948 Å/min for Zn–Ni–WC composite nanocoating, and 1.192 Å/min for Zn–Ni coating. The results showed that the Zn–Ni–WC composite nanocoating reduced the corrosion rate by 41.71% and showed an 8.56% increase in microhardness compared to the hardness of the Zn–Ni coating. These results are augmented to better wettable characteristics of zinc, which developed good interfacial metallurgical adhesion amongst the Ni and WC elements. The results of the novel Zn–Ni–WC nanocomposite coatings achieved a great improvement of mechanical property and corrosion protection to the steel substrate surface.
Collapse
|
4
|
Ni G, Wang S, Li Q, Zhao D, Song C, Li C. Preparation of Cr17Mn11Mo3N powders by high-pressure gas atomization and the nitrogen increasing mechanism. POWDER TECHNOL 2021. [DOI: 10.1016/j.powtec.2021.03.025] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
5
|
Fabrication of nanocrystalline austenitic stainless steel with superior strength and ductility via binder assisted extrusion method. POWDER TECHNOL 2021. [DOI: 10.1016/j.powtec.2020.10.028] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
6
|
Senocak TC, Ezirmik KV, Aysin F, Simsek Ozek N, Cengiz S. Niobium-oxynitride coatings for biomedical applications: Its antibacterial effects and in-vitro cytotoxicity. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2020; 120:111662. [PMID: 33545828 DOI: 10.1016/j.msec.2020.111662] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/03/2020] [Revised: 10/13/2020] [Accepted: 10/17/2020] [Indexed: 01/12/2023]
Abstract
316L Stainless Steel (SS) has been widely used in many medical applications, such as orthopedic prostheses and cardiovascular implants due to its good mechanical properties and resistance to corrosion. Despite its superior features, SS has bio-functionality problems. In this study, niobium oxynitride coatings were deposited onto 316L SS substrates to improve their biocompatibility using a reactive radio frequency (RF) magnetron sputtering technique. The nitrogen flow was fixed, and the nitrogen to oxygen flow ratio was set to 2, 5 and 10 to investigate the effect of oxygen concentration on biocompatibility and the antibacterial behavior of the oxynitride films. The microstructure, morphology and wettability properties of the coatings were analyzed by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and an optical tensiometer. The antibacterial activities of coated and uncoated 316L substrates were tested against S. aureus and E. coli bacterial strains. The cytotoxic effects of NbOxNy-coated and uncoated substrates were evaluated on human fibroblast cells. The results showed that niobium oxynitride coatings were not cytotoxic and exhibited more antibacterial activity in comparison to the uncoated ones.
Collapse
Affiliation(s)
- Taha Cagri Senocak
- Ataturk University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, Erzurum 25240, Turkey
| | - Kadri Vefa Ezirmik
- Ataturk University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, Erzurum 25240, Turkey.
| | - Ferhunde Aysin
- Ataturk University, Faculty of Science, Department of Biology, Erzurum 25240, Turkey
| | - Nihal Simsek Ozek
- Ataturk University, Faculty of Science, Department of Biology, Erzurum 25240, Turkey
| | - Seyda Cengiz
- Ataturk University, Faculty of Veterinary Medicine, Department of Microbiology, Erzurum 25240, Turkey
| |
Collapse
|
7
|
Kim HK, Ha HY, Bae JH, Cho MK, Kim J, Han J, Suh JY, Kim GH, Lee TH, Jang JH, Chun D. Nanoscale light element identification using machine learning aided STEM-EDS. Sci Rep 2020; 10:13699. [PMID: 32792596 PMCID: PMC7426414 DOI: 10.1038/s41598-020-70674-y] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/18/2020] [Accepted: 08/03/2020] [Indexed: 11/18/2022] Open
Abstract
Light element identification is necessary in materials research to obtain detailed insight into various material properties. However, reported techniques, such as scanning transmission electron microscopy (STEM)-energy dispersive X-ray spectroscopy (EDS) have inadequate detection limits, which impairs identification. In this study, we achieved light element identification with nanoscale spatial resolution in a multi-component metal alloy through unsupervised machine learning algorithms of singular value decomposition (SVD) and independent component analysis (ICA). Improvement of the signal-to-noise ratio (SNR) in the STEM-EDS spectrum images was achieved by combining SVD and ICA, leading to the identification of a nanoscale N-depleted region that was not observed in as-measured STEM-EDS. Additionally, the formation of the nanoscale N-depleted region was validated using STEM–electron energy loss spectroscopy and multicomponent diffusional transformation simulation. The enhancement of SNR in STEM-EDS spectrum images by machine learning algorithms can provide an efficient, economical chemical analysis method to identify light elements at the nanoscale.
Collapse
Affiliation(s)
- Hong-Kyu Kim
- Advanced Analysis Center, Korea Institute of Science and Technology, Seoul, 02792, Republic of Korea
| | - Heon-Young Ha
- Ferrous Alloy Department, Korea Institute of Materials Science, Changwon, 51508, Republic of Korea
| | - Jee-Hwan Bae
- Advanced Analysis Center, Korea Institute of Science and Technology, Seoul, 02792, Republic of Korea
| | - Min Kyung Cho
- Advanced Analysis Center, Korea Institute of Science and Technology, Seoul, 02792, Republic of Korea
| | - Juyoung Kim
- Advanced Analysis Center, Korea Institute of Science and Technology, Seoul, 02792, Republic of Korea
| | - Jeongwoo Han
- Advanced Analysis Center, Korea Institute of Science and Technology, Seoul, 02792, Republic of Korea
| | - Jin-Yoo Suh
- Center for Energy Materials Research, Korea Institute of Science and Technology, Seoul, 02792, Republic of Korea
| | - Gyeung-Ho Kim
- Advanced Analysis Center, Korea Institute of Science and Technology, Seoul, 02792, Republic of Korea
| | - Tae-Ho Lee
- Ferrous Alloy Department, Korea Institute of Materials Science, Changwon, 51508, Republic of Korea
| | - Jae Hoon Jang
- Ferrous Alloy Department, Korea Institute of Materials Science, Changwon, 51508, Republic of Korea.
| | - Dongwon Chun
- Ferrous Alloy Department, Korea Institute of Materials Science, Changwon, 51508, Republic of Korea.
| |
Collapse
|
8
|
Dehghan-Manshadi A, Yu P, Dargusch M, StJohn D, Qian M. Metal injection moulding of surgical tools, biomaterials and medical devices: A review. POWDER TECHNOL 2020. [DOI: 10.1016/j.powtec.2020.01.073] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
9
|
Brokesh AM, Gaharwar AK. Inorganic Biomaterials for Regenerative Medicine. ACS APPLIED MATERIALS & INTERFACES 2020; 12:5319-5344. [PMID: 31989815 DOI: 10.1021/acsami.9b17801] [Citation(s) in RCA: 87] [Impact Index Per Article: 21.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Regenerative medicine leverages the innate potential of the human body to efficiently repair and regenerate damaged tissues using engineered biomaterials. By designing responsive biomaterials with the appropriate biophysical and biochemical characteristics, cellular response can be modulated to direct tissue healing. Recently, inorganic biomaterials have been shown to regulate cellular responses including cell-cell and cell-matrix interactions. Moreover, ions released from these mineral-based biomaterials play a vital role in defining cell identity, as well as driving tissue-specific functions. The intrinsic properties of inorganic biomaterials, such as the release of bioactive ions (e.g., Ca, Mg, Sr, Si, B, Fe, Cu, Zn, Cr, Co, Mo, Mn, Au, Ag, V, Eu, and La), can be leveraged to induce phenotypic changes in cells or modulate the immune microenvironment to direct tissue healing and regeneration. Biophysical characteristics of biomaterials, such as topography, charge, size, electrostatic interactions, and stiffness can be modulated by addition of inorganic micro- and nanoparticles to polymeric networks have also been shown to play an important role in their biological response. In this Review, we discuss the recent emergence of inorganic biomaterials to harness the innate regenerative potential of the body. Specifically, we will discuss various biophysical or biochemical effects of inorganic-based materials in directing cellular response for regenerative medicine applications.
Collapse
Affiliation(s)
- Anna M Brokesh
- Biomedical Engineering, Dwight Look College of Engineering , Texas A&M University , College Station , Texas 77843 , United States
| | - Akhilesh K Gaharwar
- Biomedical Engineering, Dwight Look College of Engineering , Texas A&M University , College Station , Texas 77843 , United States
- Material Science and Engineering, Dwight Look College of Engineering , Texas A&M University , College Station , Texas 77843 , United States
- Center for Remote Health Technologies and Systems , Texas A&M University , College Station , Texas 77843 , United States
| |
Collapse
|
10
|
Sivaraj D, Vijayalakshmi K. Enhanced antibacterial and corrosion resistance properties of Ag substituted hydroxyapatite/functionalized multiwall carbon nanotube nanocomposite coating on 316L stainless steel for biomedical application. ULTRASONICS SONOCHEMISTRY 2019; 59:104730. [PMID: 31442768 DOI: 10.1016/j.ultsonch.2019.104730] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/20/2019] [Revised: 07/24/2019] [Accepted: 08/11/2019] [Indexed: 05/14/2023]
Abstract
The present study reports the fabrication of silver substituted hydroxyapatite/functionalized multiwall carbon nanotube (Ag-HA/f-MWCNT) on 316L stainless steel (SS) implant by spray pyrolysis technique. XRD results show an enhanced crystallinity and crystallite sizes with increasing concentration of silver in HA/f-MWCNT. The vibrational spectral analysis revealed the presence of P-O stretching vibration of phosphate group (PO43-) in all the samples. The morphology of Ag substituted HA/f-MWCNT coatings revealed regular rod-like particles arranged in the form of sheet exhibiting slight variation in the size of the particle with increasing the Ag concentration. All the samples indicate the presence of calcium, phosphor, carbon, silver and oxygen constituents in the coating surface. The minimum inhibitory concentration of the nanocomposite decreased from 0.25 mg to 0.125 mg with the increase of Ag concentration, and AO/EB results confirmed the mode of cell distraction. The 1 and 3 wt% Ag-HA/f-MWCNT nanocomposite revealed less toxic effect to the normal human osteoblast cells. The corrosion efficiencies of the fabricated films in the stimulated body fluid reveal the increase in polarization resistance with a decrease in current density (icorr) from 3.9 to 3.5 μA due to the increase of Ag concentration. The estimated hemolysis rate for 1 and 3 wt% Ag substituted HA/f-MWCNT was less than 10%. Therefore, it can be concluded that 3 wt% Ag substituted HA/f-MWCNT coating on passivated 316L SS is nonhemolytic and most suited as a novel alternative to dental and orthopaedic implants.
Collapse
Affiliation(s)
- D Sivaraj
- Research Department of Physics, Bishop Heber College, Tiruchirappalli 17, Tamilnadu, India.
| | - K Vijayalakshmi
- Research Department of Physics, Bishop Heber College, Tiruchirappalli 17, Tamilnadu, India.
| |
Collapse
|
11
|
Nur Acar A, Kadir Ekşi A, Ekicibil A. Effect of pressure on the magnetic and structural properties of X2CrNiMo17-12-2 austenitic stainless steel prepared by powder metallurgy method. J Mol Struct 2019. [DOI: 10.1016/j.molstruc.2019.126876] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
|
12
|
Brunello G, Elsayed H, Biasetto L. Bioactive Glass and Silicate-Based Ceramic Coatings on Metallic Implants: Open Challenge or Outdated Topic? MATERIALS (BASEL, SWITZERLAND) 2019; 12:E2929. [PMID: 31510062 PMCID: PMC6766230 DOI: 10.3390/ma12182929] [Citation(s) in RCA: 27] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/16/2019] [Revised: 09/05/2019] [Accepted: 09/07/2019] [Indexed: 12/19/2022]
Abstract
The overall success and long-term life of the medical implants are decisively based on the convenient osseointegration at the hosting tissue-implant interface. Therefore, various surface modifications and different coating approaches have been utilized to the implants to enhance the bone formation and speed up the interaction with the surrounding hosting tissues, thereby enabling the successful fixation of implants. In this review, we will briefly present the main metallic implants and discuss their biocompatibility and osseointegration ability depending on their chemical and mechanical properties. In addition, as the main goal of this review, we explore the main properties of bioactive glasses and silica-based ceramics that are used as coating materials for both orthopedic and dental implants. The current review provides an overview of these bioactive coatings, with a particular emphasis on deposition methods, coating adhesion to the substrates and apatite formation ability tested by immersion in Simulated Body Fluid (SBF). In vitro and in vivo performances in terms of biocompatibility, biodegradability and improved osseointegration are examined as well.
Collapse
Affiliation(s)
- Giulia Brunello
- Department of Management and Engineering, University of Padova, Stradella San Nicola 3, 36100 Vicenza, Italy.
- Department of Neurosciences, Section of Dentistry, University of Padova, Via Giustiniani 2, 35128 Padova, Italy.
| | - Hamada Elsayed
- Department of Industrial Engineering, University of Padova, Via F. Marzolo 9, 35131 Padova, Italy.
- Ceramics Department, National Research Centre, El-Bohous Street, Cairo 12622, Egypt.
| | - Lisa Biasetto
- Department of Management and Engineering, University of Padova, Stradella San Nicola 3, 36100 Vicenza, Italy.
| |
Collapse
|
13
|
Talha M, Ma Y, Lin Y, Pan Y, Kong X, Sinha O, Behera C. Corrosion performance of cold deformed austenitic stainless steels for biomedical applications. CORROSION REVIEWS 2019; 37:283-306. [DOI: 10.1515/corrrev-2019-0004] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/01/2023]
Abstract
AbstractAustenitic stainless steels possess an excellent balance of strength and ductility along with the high ability to further raise their strength during cold deformation (CD). Corrosion resistance of austenitic stainless steels (SSs) is affected by cold deformation because passive films on the surface of steels are expected to be modified. A low level of CD enhances the surface diffusion, which results in the formation of a stable passive film leading to an increase in the corrosion resistance in neutral chloride solutions. The chromium content in the passive film on a deformed steel surface is usually richer, with a higher Cr/Fe ratio than that formed on annealed steels. A higher chromium content makes surface films more stable, which improves the corrosion resistance. However, severe CD results in the formation of strain-induced martensite phase and deformation twins, which decreases the localized corrosion resistance by increasing the number of active anodic sites on the surface. The corrosion resistance, especially the pitting resistance, in SSs is diminished with increasing volume fraction of the martensite. In this review, we highlighted the failure modes of corrosion of stainless steel implants, factors affecting corrosion, and effect of CD on mechanical properties and emphatically on the corrosion resistance of SSs for biomedical applications.
Collapse
Affiliation(s)
- Mohd Talha
- State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, 610500 Sichuan, P.R. China
- School of Materials Science and Engineering, Southwest Petroleum University, Chengdu, 610500 Sichuan, P.R. China
| | - Yucong Ma
- School of Materials Science and Engineering, Southwest Petroleum University, Chengdu, 610500 Sichuan, P.R. China
| | - Yuanhua Lin
- State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, 610500 Sichuan, P.R. China
- School of Materials Science and Engineering, Southwest Petroleum University, Chengdu, 610500 Sichuan, P.R. China
| | - Yong Pan
- School of Materials Science and Engineering, Southwest Petroleum University, Chengdu, 610500 Sichuan, P.R. China
| | - Xiangwei Kong
- School of Petroleum Engineering, Yangtze University, Wuhan, 434023 Hubei, P.R. China
| | - O.P. Sinha
- Department of Metallurgical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi-221005, UP, India
| | - C.K. Behera
- Department of Metallurgical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi-221005, UP, India
| |
Collapse
|
14
|
Pitting Corrosion Resistance and Repassivation Behavior of C-Bearing Duplex Stainless Steel. METALS 2019. [DOI: 10.3390/met9090930] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
The effects of C-substitution for part of the N content, on the pitting corrosion resistance and repassivation tendencies of duplex stainless steels (DSSs) were investigated. For this investigation, normal UNS S32205 containing N only (DSS-N) and the C-substituted DSS (DSS-NC) were fabricated. Microstructural analyses confirmed that the two DSSs had dual-phase microstructures without precipitates, and they possessed similar initial microstructure, including their grain sizes and phase fractions. Polarization and immersion tests performed in concentrated chloride solutions revealed that the DSS-NC was more resistant against stable pitting corrosion and possessed a higher repassivation tendency than the DSS-N. Furthermore, the corrosion pits initiated and propagated to a less corrosion resistant α phase. Polarization tests and corrosion depth measurements conducted in an HCl solution indicated that the DSS-NC exhibited lower galvanic corrosion rate between the α and γ phases than the DSS-N. Therefore, the growth rate of pit embryo was lowered in the DSS-NC, which shifted the potentials for the stable pit initiation and the pit extinction to the higher values.
Collapse
|
15
|
An Efficient Approach for Nitrogen Diffusion and Surface Nitriding of Boron-Titanium Modified Stainless Steel Alloy for Biomedical Applications. METALS 2019. [DOI: 10.3390/met9070755] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Austenitic 316L stainless steel has been the most widely acceptable biomaterial for producing implants. The downside of this material includes the leaching of nickel ions from the matrix that limits its’ usage in implant manufacturing. In this research, production of stainless steel alloy modified with boron and titanium is investigated. The sintering of the alloy systems is carried out in nitrogen atmosphere for a dwell time of 8 h. The X-Ray diffraction (XRD) analysis reveals that dwell time and alloy composition leads to the formation of strong nitrides and borides. The X-Ray Photoelectron Spectroscopy (XPS) results show the presence of nitrogen on to the surface of sintered specimens. The nitride layer on the surface of the specimens is helpful in the retention of nickel ions in the stainless steel matrix, as indicated in the weight loss measurements. The cytotoxicity assessment indicates that the developed alloys are biocompatible and can be used as implant materials.
Collapse
|
16
|
High-Temperature Deformability of a Fe-Cr-Mn-Ni Austenite Stainless Steel with High Nitrogen and High Carbon Contents. METALS 2018. [DOI: 10.3390/met8080608] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
High temperature deformability and fracture behavior of deformation-processed high nitrogen high carbon Fe-Cr-Mn-Ni stainless steel rods were studied. The effective fracture elongation increased rapidly from 1000 °C, and reached high values (>45%) at 1100–1200 °C, accompanied by strain softening and stress serrations, supporting periodic dynamic recrystallization (DRX). Dynamically recrystallized grains were observed close to the fracture surface, suggesting that active DRX worked until its fracture. Pre-deformation-annealing of Fe-Cr-Mn-Ni stainless steel rods at 1200 °C was found to deteriorate in deformability above 1000 °C, while it enhanced ductility below 950 °C. Pre-deformation annealing had a negative effect on the deformability above 1000 °C due to the reduction of driving forces for DRX, but it exhibited a beneficial effect on the ductility at lower temperatures because of the ease of slip in large-grained structures. The fracture surface at 1250 °C exhibited intergranular fractures due to partial melting at grain boundaries, supported by the thermodynamic calculation of the solidus temperature of Fe-Cr-Mn-Ni austenite stainless steel. In this study, effective fracture elongation, defined based on the assumption that the effective gage length decreases with straining, was found to be an accurate measure of hot deformability.
Collapse
|
17
|
316L Stainless Steel Manufactured by Selective Laser Melting and Its Biocompatibility with or without Hydroxyapatite Coating. METALS 2018. [DOI: 10.3390/met8070548] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/05/2023]
Abstract
To fabricate metallic 316L/HA (hydroxyapatite) materials which meet the requirements of an implant’s mechanical properties and bioactivity for its function as human bone replacement, selective laser melting (SLM) has been employed in this study to prepare a 316L stainless steel matrix, which was subsequently covered with a hydroxyapatite (HA) coating using the sol-gel method. High density (98.9%) as-printed parts were prepared using a laser power of 230 W and a scanning speed of 800 mm/s. Austenite and residual acicular ferrite existed in the microstructure of the as-printed 316L stainless steel, and the sub-grain was uniform, whose primary dendrite spacing was around 0.35 μm. The as-printed 316L stainless steel showed the highest Vickers hardness, elastic modulus, and tensile strength at ~ (~ means about; same applies below unless stated otherwise) 247 HV, ~214.2 GPa, and ~730 MPa, respectively. The elongation corresponding to the highest tensile strength was ~38.8%. The 316L/HA structure, measured by the Relative Growth Rate (RGR) value, exhibited no cell cytotoxicity, and presented better biocompatibility than the uncoated as-printed and as-cast 316L samples.
Collapse
|
18
|
Additive Manufacturing of a 316L Steel Matrix Composite Reinforced with CeO2 Particles: Process Optimization by Adjusting the Laser Scanning Speed. TECHNOLOGIES 2018. [DOI: 10.3390/technologies6010025] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
19
|
Sharma CV, Trivedi JR, Chaudhury SK. On Increasing Mn Recovery During Production of Mn-Based Stainless Steel. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 2017; 70:2651-2660. [DOI: 10.1007/s12666-017-1125-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/19/2023]
|
20
|
Hamidi MFFA, Harun WSW, Samykano M, Ghani SAC, Ghazalli Z, Ahmad F, Sulong AB. A review of biocompatible metal injection moulding process parameters for biomedical applications. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2017; 78:1263-1276. [PMID: 28575965 DOI: 10.1016/j.msec.2017.05.016] [Citation(s) in RCA: 61] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/08/2016] [Revised: 04/30/2017] [Accepted: 05/04/2017] [Indexed: 01/07/2023]
Abstract
Biocompatible metals have been revolutionizing the biomedical field, predominantly in human implant applications, where these metals widely used as a substitute to or as function restoration of degenerated tissues or organs. Powder metallurgy techniques, in specific the metal injection moulding (MIM) process, have been employed for the fabrication of controlled porous structures used for dental and orthopaedic surgical implants. The porous metal implant allows bony tissue ingrowth on the implant surface, thereby enhancing fixation and recovery. This paper elaborates a systematic classification of various biocompatible metals from the aspect of MIM process as used in medical industries. In this study, three biocompatible metals are reviewed-stainless steels, cobalt alloys, and titanium alloys. The applications of MIM technology in biomedicine focusing primarily on the MIM process setting parameters discussed thoroughly. This paper should be of value to investigators who are interested in state of the art of metal powder metallurgy, particularly the MIM technology for biocompatible metal implant design and development.
Collapse
Affiliation(s)
- M F F A Hamidi
- Institute of Postgraduate Studies, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26300 Gambang, Kuantan, Pahang, Malaysia
| | - W S W Harun
- Green Research for Advanced Materials Laboratory, Human Engineering Group, Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia.
| | - M Samykano
- Structural and Material Degradation Group, Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia
| | - S A C Ghani
- Green Research for Advanced Materials Laboratory, Human Engineering Group, Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia
| | - Z Ghazalli
- Green Research for Advanced Materials Laboratory, Human Engineering Group, Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia
| | - F Ahmad
- Department of Mechanical Engineering, Universiti Teknologi PETRONAS, Malaysia
| | - A B Sulong
- Department of Mechanical & Materials Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, 43600 UKM, Bangi, Malaysia
| |
Collapse
|
21
|
Molecular dynamics study of nitrogen diffusion in nanocrystalline iron. J Mol Model 2016; 23:8. [PMID: 27981456 DOI: 10.1007/s00894-016-3174-y] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/07/2016] [Accepted: 11/22/2016] [Indexed: 10/20/2022]
Abstract
To obtain a deeper understanding of the production of advanced high-nitrogen steels, the diffusivity of nitrogen in bcc iron was investigated at the nanoscale by molecular dynamics (MD) simulation using the modified embedded-atom method (MEAM) interatomic potential. The diffusivity of nitrogen was calculated by mean square displacement (MSD) at different temperatures (773-1473 K) and nitrogen concentrations (0.23, 0.77, and 1.50 wt.%). The results show that the diffusion coefficient increases with temperature and decreases with increasing nitrogen concentration. The temperature dependence of the diffusion coefficient according to the Arrhenius equation was obtained. Activation energies and pre-exponential factors for different nitrogen concentrations were derived from the diffusion coefficient.
Collapse
|
22
|
Svanidze E, Besara T, Ozaydin MF, Tiwary CS, Wang JK, Radhakrishnan S, Mani S, Xin Y, Han K, Liang H, Siegrist T, Ajayan PM, Morosan E. High hardness in the biocompatible intermetallic compound β-Ti3Au. SCIENCE ADVANCES 2016; 2:e1600319. [PMID: 27453942 PMCID: PMC4956191 DOI: 10.1126/sciadv.1600319] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/03/2016] [Accepted: 06/28/2016] [Indexed: 05/02/2023]
Abstract
The search for new hard materials is often challenging, but strongly motivated by the vast application potential such materials hold. Ti3Au exhibits high hardness values (about four times those of pure Ti and most steel alloys), reduced coefficient of friction and wear rates, and biocompatibility, all of which are optimal traits for orthopedic, dental, and prosthetic applications. In addition, the ability of this compound to adhere to ceramic parts can reduce both the weight and the cost of medical components. The fourfold increase in the hardness of Ti3Au compared to other Ti-Au alloys and compounds can be attributed to the elevated valence electron density, the reduced bond length, and the pseudogap formation. Understanding the origin of hardness in this intermetallic compound provides an avenue toward designing superior biocompatible, hard materials.
Collapse
Affiliation(s)
- Eteri Svanidze
- Department of Physics and Astronomy, Rice University, Houston, TX 77005, USA
| | - Tiglet Besara
- National High Magnetic Field Laboratory, Florida State University, Tallahassee, FL 32310, USA
| | - M. Fevsi Ozaydin
- Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843, USA
| | | | - Jiakui K. Wang
- Department of Physics and Astronomy, Rice University, Houston, TX 77005, USA
| | | | - Sendurai Mani
- Department of Translational Molecular Pathology, University of Texas MD Anderson Cancer Center, Houston, TX 77005, USA
| | - Yan Xin
- National High Magnetic Field Laboratory, Florida State University, Tallahassee, FL 32310, USA
| | - Ke Han
- National High Magnetic Field Laboratory, Florida State University, Tallahassee, FL 32310, USA
| | - Hong Liang
- Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843, USA
| | - Theo Siegrist
- National High Magnetic Field Laboratory, Florida State University, Tallahassee, FL 32310, USA
| | - Pulickel M. Ajayan
- Materials Science and NanoEngineering, Rice University, Houston, TX 77005, USA
| | - E. Morosan
- Department of Physics and Astronomy, Rice University, Houston, TX 77005, USA
- Materials Science and NanoEngineering, Rice University, Houston, TX 77005, USA
- Corresponding author.
| |
Collapse
|
23
|
Toxicity assessment and selective leaching characteristics of Cu-Al-Ni shape memory alloys in biomaterials applications. J Appl Biomater Funct Mater 2016; 14:e59-64. [PMID: 26952585 DOI: 10.5301/jabfm.5000245] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 06/05/2015] [Indexed: 11/20/2022] Open
Abstract
BACKGROUND Cu-Al-Ni shape memory alloys (SMAs) possess two-way shape memory effects, superelasticity, and damping capacity. Nonetheless, Cu-Al-Ni SMAs remain promising candidates for use in biomedical applications, as they are more economical and machinable than other SMAs. Ensuring the biocompatibility of Cu-Al-Ni SMAs is crucial to their development for biomedical applications. Therefore, this study aimed to assess the toxicity of Cu-Al-Ni SMAs using a Probit dose-response model and augmented simplex design. METHODS In this study, the effects of Cu2+, Al3+ and Ni2+ metal ions on bacteria (Escherichia coli DH5α) using Probit dose-response analysis and augmented simplex design to assess the actual toxicity of the Cu-Al-Ni SMAs. RESULTS Extraction and repetition of Escherichia coli DH5α solutions with high Cu2+ ion concentrations and 30-hour incubation demonstrated that Escherichia coli DH5α was able to alter its growth mechanisms in response to toxins. Metal ions leached from Cu-Al-Ni SMAs appeared in a multitude of compositions with varying degrees of toxicity, and those appearing close to a saddle region identified in the contour plot of the augmented simplex model were identified as candidates for elevated toxicity levels. When the Cu-13.5Al-4Ni SMA plate was immersed in Ringer's solution, the selective leaching rate of Ni2+ ions far exceeded that of Cu2+ and Al3+. The number of Cu2+, Al3+ and Ni2+ ions leached from Cu-Al-Ni SMAs increased with immersion time; however, at higher ratios, toxicity interactions among the metal ions had the effect of gradually reducing overall toxicity levels with regard to Escherichia coli DH5α. CONCLUSIONS The quantities of Cu2+, Al3+ and Ni2+ ions leached from the Cu-13.5Al-4Ni SMA plate increased with immersion time, the toxicity interactions associated with these compositions reduced the actual toxicity to Escherichia coli DH5α.
Collapse
|
24
|
Is cell viability always directly related to corrosion resistance of stainless steels? MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2016; 62:439-43. [PMID: 26952444 DOI: 10.1016/j.msec.2016.01.091] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/25/2015] [Revised: 12/22/2015] [Accepted: 01/29/2016] [Indexed: 11/24/2022]
Abstract
It has been frequently reported that cell viability on stainless steels is improved by increasing their corrosion resistance. The question that arises is whether human cell viability is always directly related to corrosion resistance in these biostable alloys. In this work, the microstructure and in vitro corrosion behavior of a new class of medical-grade stainless steels were correlated with adult human mesenchymal stem cell viability. The samples were produced by a powder metallurgy route, consisting of mechanical alloying and liquid-phase sintering with a sintering aid of a eutectic Mn-Si alloy at 1050 °C for 30 and 60 min, leading to nanostructures. In accordance with transmission electron microscopic studies, the additive particles for the sintering time of 30 min were not completely melted. Electrochemical impedance spectroscopic experiments suggested the higher corrosion resistance for the sample sintered for 60 min; however, a better cell viability on the surface of the less corrosion-resistant sample was unexpectedly found. This behavior is explained by considering the higher ion release rate of the Mn-Si additive material, as preferred sites to corrosion attack based on scanning electron microscopic observations, which is advantageous to the cells in vitro. In conclusion, cell viability is not always directly related to corrosion resistance in stainless steels. Typically, the introduction of biodegradable and biocompatible phases to biostable alloys, which are conventionally anticipated to be corrosion-resistant, can be advantageous to human cell responses similar to biodegradable metals.
Collapse
|
25
|
Javanbakht M, Salahinejad E, Hadianfard M. The effect of sintering temperature on the structure and mechanical properties of medical-grade powder metallurgy stainless steels. POWDER TECHNOL 2016. [DOI: 10.1016/j.powtec.2015.11.054] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/03/2023]
|
26
|
Sintering behavior of 316L stainless steel micro–nanopowder compact fabricated by powder injection molding. POWDER TECHNOL 2015. [DOI: 10.1016/j.powtec.2015.04.014] [Citation(s) in RCA: 39] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
27
|
Frutos E, González-Carrasco J. Dynamic nanomechanical properties of novel Si-rich intermetallic coatings growth on a medical 316 LVM steel by hot dipping in a hypereutectic Al–25Si alloy. J Mech Behav Biomed Mater 2015; 46:93-103. [DOI: 10.1016/j.jmbbm.2015.02.018] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/11/2014] [Revised: 02/17/2015] [Accepted: 02/18/2015] [Indexed: 11/27/2022]
|
28
|
Abstract
Stainless steel, titanium alloys and cobalt chromium molybdenum alloys are classified under the metallic biomaterials whereby various surgical implants, prosthesis and medical devices are manufactured to replace missing body parts which may be lost through accident, trauma, disease, or congenital conditions. Among these materials, cobalt chromium molybdenum alloys are the common cobalt base alloy used for orthopedic implants due their excellence properties which include high corrosion resistance, high strength, high hardness, high creep resistance, biocompatibility and greater wear resistance. This paper summarises the various aspects and characteristic of metallic biomaterials such as stainless steel, titanium and cobalt chromium alloys for medical applications especially for orthopedic implant. These include material properties, biocompatibility, advantages and limitations for medical implants applications.
Collapse
|
29
|
Ha HY, Lee TH. Determining Factors for the Protectiveness of the Passive Film of FeCrN Stainless Steel Formed in Sulfuric Acid Solutions. CORROSION SCIENCE AND TECHNOLOGY 2013. [DOI: 10.14773/cst.2013.12.4.163] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/31/2022]
|
30
|
Inoue M, Sasaki M, Katada Y, Taguchi T. Quantitative biocompatibility evaluation of nickel-free high-nitrogen stainless steel in vitro/in vivo. J Biomed Mater Res B Appl Biomater 2013; 102:68-72. [PMID: 23852917 PMCID: PMC4230471 DOI: 10.1002/jbm.b.32982] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/24/2013] [Revised: 04/14/2013] [Accepted: 05/05/2013] [Indexed: 11/11/2022]
Abstract
Coronary stents must not provoke an inflammatory response; however, some kinds of ions that are released from biometals induce biological reaction. In the present study, we quantitatively evaluated biological reaction of nickel-free high-nitrogen stainless steel (HNS) by endothelial cell culture, and a bioimaging system using NF-κB/luciferase transgenic mice to confirm the potential of HNS for the application of coronary stent. Endothelialization was greater with HNS than with commercial stainless steel (SUS316L). In vivo inflammatory response of HNS was lower than that of SUS316L. These differences may be related to the amounts of nickel ion eluted from the stents, as HNS did not elute nickel ion. These data suggest that HNS may be useful as a material for coronary artery stents.
Collapse
Affiliation(s)
- Motoki Inoue
- Biomaterials Unit, Nano-Life Field, International Center for Materials Nanoarchitectonics (MANA) National Institute for Materials Science (NIMS), Tsukuba, Ibaraki, Japan
| | | | | | | |
Collapse
|
31
|
Talha M, Behera CK, Sinha OP. A review on nickel-free nitrogen containing austenitic stainless steels for biomedical applications. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2013; 33:3563-75. [PMID: 23910251 DOI: 10.1016/j.msec.2013.06.002] [Citation(s) in RCA: 62] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/24/2012] [Revised: 05/30/2013] [Accepted: 06/04/2013] [Indexed: 10/26/2022]
Abstract
The field of biomaterials has become a vital area, as these materials can enhance the quality and longevity of human life. Metallic materials are often used as biomaterials to replace structural components of the human body. Stainless steels, cobalt-chromium alloys, commercially pure titanium and its alloys are typical metallic biomaterials that are being used for implant devices. Stainless steels have been widely used as biomaterials because of their very low cost as compared to other metallic materials, good mechanical and corrosion resistant properties and adequate biocompatibility. However, the adverse effects of nickel ions being released into the human body have promoted the development of "nickel-free nitrogen containing austenitic stainless steels" for medical applications. Nitrogen not only replaces nickel for austenitic structure stability but also much improves steel properties. Here we review the harmful effects associated with nickel and emphatically the advantages of nitrogen in stainless steel, as well as the development of nickel-free nitrogen containing stainless steels for medical applications. By combining the benefits of stable austenitic structure, high strength, better corrosion and wear resistance and superior biocompatibility in comparison to the currently used austenitic stainless steel (e.g. 316L), the newly developed nickel-free high nitrogen austenitic stainless steel is a reliable substitute for the conventionally used medical stainless steels.
Collapse
Affiliation(s)
- Mohd Talha
- Centre of Advanced Study, Department of Metallurgical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005, Uttar Pradesh, India
| | | | | |
Collapse
|
32
|
Preparation and Characterization of Hydroxyapatite Coating on AZ31 Mg Alloy for Implant Applications. Bioinorg Chem Appl 2013; 2013:175756. [PMID: 23533371 PMCID: PMC3600141 DOI: 10.1155/2013/175756] [Citation(s) in RCA: 37] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/02/2012] [Revised: 01/19/2013] [Accepted: 01/21/2013] [Indexed: 11/17/2022] Open
Abstract
Magnesium alloys as biodegradable metal implants in orthopaedic research received a lot of interest in recent years. They have attractive biological properties including being essential to human metabolism, biocompatibility, and biodegradability. However, magnesium can corrode too rapidly in the high-chloride environment of the physiological system, loosing mechanical integrity before the tissue has sufficiently healed. Hydroxyapatite (HAp) coating was proposed to decrease the corrosion rate and improve the bioactivity of magnesium alloy. Apatite has been cathodically deposited on the surface of Mg alloy from solution that composed of 3 mM Ca(H2PO4)2 and 7 mM CaCl2 at various applied potentials. The growing of HAp was confirmed on the surface of the coatings after immersion in SBF solution for 7 days. The coating obtained at −1.4 V showed higher corrosion resistance with bioactive behaviors.
Collapse
|
33
|
Abstract
Biodegradable metals have been proposed for temporary implants such as coronary artery stent and internal bone fixators. During implantation, a stent is inserted and expanded by using a catheter into a narrowed coronary artery and is subjected to mechanical stress in a corrosive body fluid environment, a condition where stress corrosion cracking may occur. This letter reports an experimental work to verify the susceptibility of Fe-35Mn alloy, a proposed alloy for biodegradable coronary stent, to stress corrosion cracking under a pseudo-physiological condition.
Collapse
|
34
|
Hanawa T. Research and development of metals for medical devices based on clinical needs. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS 2012; 13:064102. [PMID: 27877526 PMCID: PMC5099759 DOI: 10.1088/1468-6996/13/6/064102] [Citation(s) in RCA: 33] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/04/2012] [Revised: 12/13/2012] [Accepted: 10/18/2012] [Indexed: 05/27/2023]
Abstract
The current research and development of metallic materials used for medicine and dentistry is reviewed. First, the general properties required of metals used in medical devices are summarized, followed by the needs for the development of α + β type Ti alloys with large elongation and β type Ti alloys with a low Young's modulus. In addition, nickel-free Ni-Ti alloys and austenitic stainless steels are described. As new topics, we review metals that are bioabsorbable and compatible with magnetic resonance imaging. Surface treatment and modification techniques to improve biofunctions and biocompatibility are categorized, and the related problems are presented at the end of this review. The metal surface may be biofunctionalized by various techniques, such as dry and wet processes. These techniques make it possible to apply metals to scaffolds in tissue engineering.
Collapse
|
35
|
Chang SH, Chen BY, Lin YC. Toxicity assessment of three-component Fe–Cr–Ni biomedical materials using an augmented simplex design. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2012; 32:1893-1896. [DOI: 10.1016/j.msec.2012.05.008] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/29/2011] [Revised: 02/01/2012] [Accepted: 05/09/2012] [Indexed: 10/28/2022]
|
36
|
Antunes RA, de Oliveira MCL. Corrosion fatigue of biomedical metallic alloys: mechanisms and mitigation. Acta Biomater 2012; 8:937-62. [PMID: 21951920 DOI: 10.1016/j.actbio.2011.09.012] [Citation(s) in RCA: 125] [Impact Index Per Article: 10.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/15/2011] [Revised: 08/07/2011] [Accepted: 09/09/2011] [Indexed: 10/17/2022]
Abstract
Cyclic stresses are often related to the premature mechanical failure of metallic biomaterials. The complex interaction between fatigue and corrosion in the physiological environment has been subject of many investigations. In this context, microstructure, heat treatments, plastic deformation, surface finishing and coatings have decisive influence on the mechanisms of fatigue crack nucleation and growth. Furthermore, wear is frequently present and contributes to the process. However, despite all the effort at elucidating the mechanisms that govern corrosion fatigue of biomedical alloys, failures continue to occur. This work reviews the literature on corrosion-fatigue-related phenomena of Ti alloys, surgical stainless steels, Co-Cr-Mo and Mg alloys. The aim was to discuss the correlation between structural and surface aspects of these materials and the onset of fatigue in the highly saline environment of the human body. By understanding such correlation, mitigation of corrosion fatigue failure may be achieved in a reliable scientific-based manner. Different mitigation methods are also reviewed and discussed throughout the text. It is intended that the information condensed in this article should be a valuable tool in the development of increasingly successful designs against the corrosion fatigue of metallic implants.
Collapse
|
37
|
Buhagiar J, Dong H. Corrosion properties of S-phase layers formed on medical grade austenitic stainless steel. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2012; 23:271-281. [PMID: 22160745 DOI: 10.1007/s10856-011-4516-z] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/01/2011] [Accepted: 12/02/2011] [Indexed: 05/31/2023]
Abstract
The corrosion properties of S-phase surface layers formed in AISI 316LVM (ASTM F138) and High-N (ASTM F1586) medical grade austenitic stainless steels by plasma surface alloying with nitrogen (at 430°C), carbon (at 500°C) and both carbon and nitrogen (at 430°C) has been investigated. The corrosion behaviour of the S-phase layers in Ringer's solutions was evaluated using potentiodynamic and immersion corrosion tests. The corrosion damage was evaluated using microscopy, hardness testing, inductive coupled plasma mass spectroscopy and X-ray diffraction. The experimental results have demonstrated that low-temperature nitriding, carburising and carbonitriding can improve the localised corrosion resistance of both industrial and medical grade austenitic stainless steels as long as the threshold sensitisation temperature is not reached. Carburising at 500°C has proved to be the best hardening treatment with the least effect on the corrosion resistance of the parent alloy.
Collapse
Affiliation(s)
- Joseph Buhagiar
- School of Metallurgy and Materials, The University of Birmingham, Birmingham, UK.
| | | |
Collapse
|
38
|
|
39
|
Abstract
This paper introduced several conventional stainless steels for piercing jewelry, and discussed their corrosion resistance, nickel allergy problem and risk of piercing infection. The authors proposed that several requirements should be taken into consideration in developing stainless steel materials for piercing jewelry, including corrosion resistance, safety, anti-bacterial, castability, workability, weldability, surface treatment property, and etc. High nitrogen and nickel free or low nickel stainless steels with anti-bacterial performance, which had many unique characteristics such as excellent corrosion resistance, no nickel allergy and less risk of piercing infection, would become a new development trend of stainless steels for piercing jewelry.
Collapse
|
40
|
Corrosion Resistance of Nickel-Free Austenitic Stainless Steels and their Nanocomposites with Hydroxyapatite in Ringer's Solution. ACTA ACUST UNITED AC 2011. [DOI: 10.4028/www.scientific.net/msf.674.159] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
In this work Ni-free austenitic stainless steels with nanostructure and their nanocomposites were synthesized by mechanical alloying (MA), heat treatment and nitriding of elemental microcrystalline Fe, Cr, Mn and Mo powders with addition of hydroxyapatite (HA). Microhardness and corrosion tests' results of obtained materials are presented. Mechanical alloying and nitriding are very effective technologies to improve the corrosion resistance of stainless steel. Decreasing the corrosion current density is a distinct advantage for prevention of ion release and it leads to better cytocompatibility. Similar process in case of nanocomposites of stainless steel with hydroxyapatite helps achieve even better mechanical properties and corrosion resistance. Hence nanocrystalline nickel-free stainless steels and nickel-free stainless steel/hydroxyapatite nanocomposites could be promising bionanomaterials for use as a hard tissue replacement implants, e.g. orthopedic implants.
Collapse
|
41
|
Abstract
Stents are expandable tubes of metallic mesh that were developed to address the negative sequelae of balloon angioplasty and are currently used in cardiovascular medicine. In this review, the use of particular metals to make stents is discussed from the viewpoint of materials engineering. The properties and characteristics of metals used for stents, such as stainless steels, nickel-titanium alloys, tantalum, cobalt-chromium alloys, and magnesium alloys, are explained. In addition, problems and disadvantages related to metallic stents and their possible solutions are given.
Collapse
Affiliation(s)
- Takao Hanawa
- Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University, Tokyo, Japan.
| |
Collapse
|
42
|
O'Brien B, Carroll W. The evolution of cardiovascular stent materials and surfaces in response to clinical drivers: a review. Acta Biomater 2009; 5:945-58. [PMID: 19111513 DOI: 10.1016/j.actbio.2008.11.012] [Citation(s) in RCA: 219] [Impact Index Per Article: 14.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/25/2008] [Revised: 10/26/2008] [Accepted: 11/20/2008] [Indexed: 11/28/2022]
Abstract
This review examines cardiovascular stent materials from the perspective of a range of clinical drivers and the materials that have been developed in response to these drivers. The review is generally chronological and outlines how stent materials have evolved from initial basic stainless steel devices all the way through to the novel biodegradable devices currently being explored. Where appropriate, pre-clinical or clinical data that influenced decisions and selections along the way is referenced. Opinions are given as to the merit and direction of various ongoing and future developments.
Collapse
Affiliation(s)
- Barry O'Brien
- National Centre for Biomedical Engineering Science, National University of Ireland, Galway, Ireland.
| | | |
Collapse
|
43
|
In vivo osteocompatibility of lotus-type porous nickel-free stainless steel in rats. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2009. [DOI: 10.1016/j.msec.2008.09.037] [Citation(s) in RCA: 30] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
44
|
Alvarez K, Sato K, Hyun S, Nakajima H. Fabrication and properties of Lotus-type porous nickel-free stainless steel for biomedical applications. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2008. [DOI: 10.1016/j.msec.2007.01.010] [Citation(s) in RCA: 43] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
45
|
Hertz A, Bruce IJ. Inorganic materials for bone repair or replacement applications. Nanomedicine (Lond) 2007; 2:899-918. [DOI: 10.2217/17435889.2.6.899] [Citation(s) in RCA: 57] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
In recent years, excipient systems have been used increasingly in biomedicine in reconstructive and replacement surgery, as bone cements, drug-delivery vehicles and contrast agents. Particularly, interest has been growing in the development and application of controlled pore inorganic ceramic materials for use in bone-replacement and bone-repair roles and, in this context, attention has been focused on calcium-phosphate, bioactive glasses and SiO2- and TiO2-based materials. It has been shown that inorganic materials that most closely mimic bone structure and surface chemistry most closely function best in bone replacement/repair and, in particular, if a substance possesses a macroporous structure (pores and interconnections >100µm diameter), then cell infiltration, bone growth and vascularization can all be promoted. The surface roughness and micro/mesoporosity of a material have also been observed to significantly influence its ability to promote apatite nucleation and cell attachment significantly. Pores (where present) can also be packed with pharmaceuticals and biomolecules (e.g., bone morphogenetic proteins [BMPs], which can stimulate bone formation). Finally, the most bio-efficient – in terms of collagen formation and apatite nucleation – materials are those that are able to provide soluble mineralizing species (Si, Ca, PO4) at their implant sites and/or are doped or have been surface-activated with specific functional groups. This article presents the context and latest advances in the field of bone-repair materials, especially with respect to the development of bioactive glasses and micro/mesoporous and macroporous inorganic scaffolds. It deals with the possible methods of preparing porous pure/doped or functionalized silicas or their composites, the studies that have been undertaken to evaluate their abilities to act as bone repair scaffolds and also presents future directions for work in that context.
Collapse
Affiliation(s)
- Audrey Hertz
- University of Kent, Department of Biosciences, Canterbury, CT2 7NJ, UK
| | - Ian J Bruce
- University of Kent, Department of Biosciences, Canterbury, CT2 7NJ, UK
| |
Collapse
|