Biocompatible properties of nano-drug carriers using TiO2-Au embedded on multiwall carbon nanotubes for targeted drug delivery

Advancements in nanotheranostics for glioma therapy

Gliomas are brain tumors mainly derived from glial cells that are difficult to treat and cause high mortality. Radiation, chemotherapy, and surgical excision are the conventional treatments for gliomas. Patients who have surgery or have undergone chemotherapy for glioma treatment have poor prognosis with tumor recurrence. In particular, for glioblastoma, the 5-year average survival rate is 4-7%, and the median survival is 12-18 months. A number of issues hinder effective treatment such as, poor surgical resection, tumor heterogeneity, insufficient drug penetration across the blood-brain barrier, multidrug resistance, and difficulties with drug specificity. Nanotheranostic-mediated drug delivery is becoming a well-researched consideration, and an efficient non-invasive method for delivering chemotherapeutic drugs to the target area. Theranostic nanomedicines, which incorporate therapeutic drugs and imaging agents for personalized therapies, can be used for preventing overdose of non-responders. Through the identification of massive and complicated information from next-generation sequencing, machine learning enables for precise prediction of therapeutic outcomes and post-treatment management for patients with cancer. This article gives a thorough overview of nanocarrier-mediated drug delivery with a brief introduction to drug delivery challenges. In addition, this assessment offers a current summary of preclinical and clinical research on nanomedicines for gliomas. In the future, nanotheranostics will provide personalized treatment for gliomas and other treatable cancers.

Folate-Functionalized CS/rGO/NiO Nanocomposites as a Multifunctional Drug Carrier with Anti-Microbial, Target-Specific, and Stimuli-Responsive Capacities

Purpose

This study reports the synthesis of surface-modified chitosan (CS) coated with reduced graphene oxide/nickel oxide (rGO/NiO) as a multifunctional drug carrier with anti-microbial, target-specific, and stimuli-responsive capacities. CS, rGO, and NiO nanoparticles are selected due to their pH-responsiveness, large surface area, and ROS generating-capacity, respectively.

Methods

The CS/rGO/NiO nanocomposites (NCs) are synthesized using a solvothermal approach. Glutaraldehyde is used to crosslink CS and rGO/NiO to enhance the stability of the NCs. Structural properties, magnetic properties, antimicrobial activity, drug release sustainability and toxicity of the NCs are evaluated.

Results

The NCs show good biocompatibility, excellent magnetic properties, good target specificity, and remarkable cell growth inhibitory effects. The release of doxorubicin (DOX) from the drug-loaded NCs at pH 5.0 (~98.6%) is much higher than that at pH 7.4 (~9.6%). Furthermore, the NCs inhibit the growth of A549 and MCF7 cells, causing the viability of A549 and MCF7 to drop to 12.3% and 7.1%, respectively. By using zebrafish embryos as a model, no detectable change is observed in the survival rate of the embryos after NC treatment.

Conclusion

The NCs exhibit multifunctional, target-specific, and pH-responsive characteristics. These properties make the NCs a promising candidate for use in drug delivery applications.

Synthesis of Urchin-Like Au@TiO2 Nano-Carriers as a Drug-Loading System Toward Cancer Treatment

In recent years, improving the pharmaceutical properties of drug delivery for anti-cancer treatment has become increasingly important. This is necessary to address challenges related to absorption, distribution, and stability. One potential approach solution is to attach the drug to a carrier system, such as functional noble nanomaterials, in order to improve the control of drug release and stability. Core-satellite nanoparticles (CSN) with an anisotropic morphology have enormous potential for targeted drug delivery and cancer treatment because of their large surface area, exceptional stability, and biocompatibility. We used a simple seed-mediated approach to synthesize urchin-like gold nanoparticles (ULGNPs) with a high aspect ratio and a dense network of 49 nm-sized branches, using seed solution, silver nitrate, and ascorbic acid. The ULGNPs were synthesized without a surfactant and then encapsulated with thin layers of amorphous TiO2 (ULGNPs@TiO2), resulting in an average overall size of 136±15 nm with a 27.5 nm TiO2 layer. Doxorubicin (Dox) was chosen as a model drug to assess the distribution carrier ability of ULGNPs@TiO2 core-satellite nanoparticles. The results showed 86.5 % Dox loading and 72.3 % release capacity at pH 5. The anti-cancer ability of ULGNPs@TiO2-Dox was meticulously assessed using breast cancer MCF-7 cells in the WST-1 assay. The results revealed that ULGNPs@TiO2-Dox exhibited approximately 92 % toxicity in MCF-7 cells compared to the free Dox of 89.6 % at low concentrations (5 ppm). Based on the simulation results for loading ULGNPs@TiO2 with Dox, it was observed that a structure containing five layers of Au (111) with three fixed bottom layers and two relaxed top layers, in addition to six TiO2 (100) layers, was analyzed using Grimme's DFT-D3 dispersion corrections (Scheme 1). The density functional theory (DFT) adsorption energy (Eads) shows that the amorphous TiO2 increases the Dox loading activity of ULGNPs, with Eads=-3.85 eV, negatively higher than isolated ULGNPs (Eads=-2.87 eV) and TiO2 alone (Eads=-3.61 eV). This drug carrier design has the potential to revolutionize anti-cancer treatment.

Application of Carbon Nanomaterials to Enhancing Tumor Immunotherapy: Current Advances and Prospects

Recent advances in tumor immunotherapy have highlighted the pivotal role of carbon nanomaterials, such as carbon dots, graphene quantum dots, and carbon nanotubes. This review examines the unique benefits of these materials in cancer treatment, focusing on their mechanisms of action within immunotherapy. These include applications in immunoregulation, recognition, and enhancement. We explore how these nanomaterials when combined with specific biomolecules, can form immunosensors. These sensors are engineered for highly sensitive and specific detection of tumor markers, offering crucial support for early diagnosis and timely therapeutic interventions. This review also addresses significant challenges facing carbon nanomaterials in clinical settings, such as issues related to long-term biocompatibility and the hurdles of clinical translation. These challenges require extensive ongoing research and discussion. This review is of both theoretical and practical importance, aiming to promote using carbon nanomaterials in tumor immunotherapy, potentially transforming clinical outcomes and enhancing patient care.

Impact of LED radiation intensity on gold nanoparticles photodeposition on TiO2 with physicochemical and photocatalytic characterization

This study investigates the influence of LED radiation intensity on the photodeposition of gold nanoparticles onto TiO2 substrates, examining their physicochemical properties and photocatalytic activities. Utilizing a range of radiation intensities and wavelengths, TiO2-Au composites were synthesized and characterized through techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive X-ray (EDX), and X-ray photoelectron spectroscopy (XPS). The deposition process, markedly enhanced by shorter wavelengths and higher intensities, efficiently formed gold nanoparticles. This research distinctly highlights observable morphological changes in the nanoparticles; increased radiation intensity not only augmented the size but also altered their shape from spherical to hexagonal. These morphological transformations significantly improve the composites' light absorption and catalytic properties due to the surface plasmon resonance of the gold nanoparticles. Photocatalytic assessments, using metronidazole as a model pollutant, demonstrated that composites prepared with higher LED intensities showed significantly enhanced degradation capabilities compared to those synthesized with lower intensities. The findings underscore that manipulating photodeposition parameters can critically influence the structural and functional properties of TiO2-Au composites, potentially advancing their applications in environmental remediation and solar energy utilization.

Insights into Targeted and Stimulus-Responsive Nanocarriers for Brain Cancer Treatment

Brain cancers, especially glioblastoma multiforme, are associated with poor prognosis due to the limited efficacy of current therapies. Nanomedicine has emerged as a versatile technology to treat various diseases, including cancers, and has played an indispensable role in combatting the COVID-19 pandemic as evidenced by the role that lipid nanocarrier-based vaccines have played. The tunability of nanocarrier physicochemical properties -including size, shape, surface chemistry, and drug release kinetics- has resulted in the development of a wide range of nanocarriers for brain cancer treatment. These nanocarriers can improve the pharmacokinetics of drugs, increase blood-brain barrier transfer efficiency, and specifically target brain cancer cells. These unique features would potentially allow for more efficient treatment of brain cancer with fewer side effects and better therapeutic outcomes. This review provides an overview of brain cancers, current therapeutic options, and challenges to efficient brain cancer treatment. The latest advances in nanomedicine strategies are investigated with an emphasis on targeted and stimulus-responsive nanocarriers and their potential for clinical translation.

Dual targeting multiwalled carbon nanotubes for improved neratinib delivery in breast cancer

The aim of this study was to develop biotinylated chitosan (Bio-Chi) decorated multi-walled carbon nanotubes (MWCNTs) for breast cancer therapy with the tyrosine kinase inhibitor, neratinib (NT). For achieving such a purpose, carboxylic acid functionalized multiwalled carbon nanotubes (c-MWCNTs) were initially decorated non-covalently with biotin-chitosan (Bio-Chi) coating for achieving a dual targeting mode; pH-dependent release with chitosan and biotin-receptor mediated active targeting with biotin. Afterwards, Bio-Chi decorated c-MWCNTs were loaded with the tyrosine kinase inhibitor, neratinib (NT). The formulation was then characterized by dynamic light scattering, FTIR and EDX. The drug loading efficiency was estimated to be 95.6 ± 1.2%. In vitro drug release studies revealed a pH-dependent release of NT from Bio-Chi decorated c-MWCNTs, with a higher drug release under acidic pH conditions. Sulforhodamine B (SRB) cytotoxicity assay of different NT formulations disclosed dose-dependent cytotoxicities against SkBr3 cell line, with a superior cytotoxicity observed with NT-loaded Bio-Chi-coated c-MWCNTs, compared to either free NT or NT-loaded naked c-MWCNTs. The IC50 values for free NT, NT-loaded c-MWCNTs and NT-loaded Bio-Chi-coated c-MWCNTs were 548.43 ± 23.1 μg mL-1, 319.55 ± 17.9 μg mL-1, and 257.75 ± 24.5 μg mL-1, respectively. Interestingly, competitive cellular uptake studies revealed that surface decoration of drug-loaded c-MWCNTs with Bio-Chi permitted an enhanced uptake of c-MWCNTs by breast cancer cells, presumably, via biotin receptors-mediated endocytosis. To sum up, Bio-Chi-decorated c-MWCNTs might be a promising delivery vehicle for mediating cell-specific drug delivery to breast cancer cells.

Synthesis and Characterization of Mithun (Bos frontalis) Urine-Based Antibacterial Copper Oxide Nanoparticles

The increased prevalence of disease, mortality, and antibiotic resistance among aquatic microorganisms has renewed interest in non-conventional disease prevention and control approaches. Nanoparticles present several benefits in aquaculture and hold significant potential for controlling both human and animal infections. This study reports on the antibacterial properties of green copper oxide nanoparticles (CuO NPs) synthesized from the urine of Mithun (MU) (Bos frontalis). In addition, an array of analytical techniques, including scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-visible spectroscopy (UV), and Fourier transform infrared spectroscopy (FTIR), were employed to investigate the synthesized MU-CuO nanoparticles. Aeromonas hydrophila and Aeromonas veronii, two bacterial fish pathogens known to cause severe infectious diseases in fish, were tested for their antibacterial efficacy against MU-CuO NPs. At 100 µg/mL, MU-CuO NPs exhibit enhanced antibacterial efficacy against two bacterial pathogens commonly found in fish. Applications in aquaculture may be looked at given that MU-CuO NPs showed greater antibacterial activity.

Terminalia chebula-Assisted Silver Nanoparticles: Biological Potential, Synthesis, Characterization, and Ecotoxicity

In the current research, an aqueous extract of Terminalia chebula fruit was used to produce silver nanoparticles (Ag NPs) in a sustainable manner. UV-visible spectrophotometry, transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were used to characterize the synthesized nanoparticles. Synthesized Ag NPs were detected since their greatest absorption peak was seen at 460 nm. The synthesized Ag NPs were spherical and had an average size of about 50 nm, with agglomerated structures, as shown via SEM and TEM analyses. The biological activities of the synthesized Ag NPs were evaluated in terms of their antibacterial and antioxidant properties, as well as protein leakage and time-kill kinetics assays. The results suggest that the green synthesized Ag NPs possess significant antibacterial and antioxidant activities, making them a promising candidate for therapeutic applications. Furthermore, the study also evaluated the potential toxicological effects of the Ag NPs using zebrafish embryos as a model organism. The findings indicate that the synthesized Ag NPs did not induce any significant toxic effects on zebrafish embryos, further supporting their potential as therapeutic agents. In conclusion, the environmentally friendly production of Ag NPs using the extract from T. chebula is a promising strategy for discovering novel therapeutic agents with prospective uses in biomedicine.

Controlled growth of titanium dioxide nanotubes for doxorubicin loading and studies of in vitro antitumor activity

Titanium dioxide (TiO₂) materials are suitable for use as drug carriers due to their natural biocompatibility and nontoxicity. The aim of the study presented in this paper was to investigate the controlled growth of TiO₂ nanotubes (TiO₂ NTs) of different sizes via an anodization method, in order to delineate whether the size of NTs governs their drug loading and release profile as well as their antitumor efficiency. TiO₂ NTs were tailored to sizes ranging from 25 nm to 200 nm according to the anodization voltage employed. The TiO₂ NTs obtained by this process were characterized using scanning electron microscopy, transmission electron microscopy, and dynamic light scattering The larger TiO₂ NTs exhibited greatly improved doxorubicin (DOX)-loading capacity (up to 37.5 wt%), which contributed to their outstanding cell-killing ability, as evidenced by their lower half-maximal inhibitory concentration (IC50). Comparisons were carried out of cellular uptake and intracellular release rates of DOX for large and small TiO₂ NTs loaded with DOX. The results showed that the larger TiO₂ NTs represent a promising therapeutic carrier for drug loading and controlled release, which could improve cancer treatment outcomes. Therefore, TiO₂ NTs of larger size are useful substances with drug-loading potency that may be used in a wide range of medical applications.

Green Synthesis of Copper Oxide Nanoparticles Using Sesbania grandiflora Leaf Extract and Their Evaluation of Anti-Diabetic, Cytotoxic, Anti-Microbial, and Anti-Inflammatory Properties in an In-Vitro Approach

Green methods of synthesizing nanoparticles are safer than chemical and physical methods, as well as being eco-friendly and cost-efficient. In this study, we use copper oxide nanoparticles (CuO NPs) fabricated with Sesbania grandiflora (Sg) (Hummingbird tree) leaves to test the effectiveness of green synthesizing methods. The attained Sg-CuO NPs physical and optical nature is characterized by UV-Vis spectroscopy Differential Reflectance Spectroscopy (UV-Vis DRS), Fourier Transform Infra-Red spectroscopy (FTIR), X-ray Diffraction spectroscopy (XRD), Scanning Electron Microscope (SEM), and Energy Dispersive X-ray Analysis (EDAX). UV-Vis spectrum for Sg-CuO NPs revealed a peak at 410 nm. SEM images showed the aggregation of needle-shaped particles, at a size of 33 nm. The amylase and glucosidase enzymes were inhibited by the Sg-CuO NPs up to 76.7% and 72.1%, respectively, indicating a possible antihyperglycemic effect. Fabricated Sg-CuO NPs disclosed the excellent inhibition of DPPH-free radicle formation (89.7%) and repressed protein degradation (81.3%). The results showed that Sg-CuO NPs display good anti-bacterial activity against the gram-negative (Escherichia coli and Pseudomonas aeruginosa) and gram-positive (Staphylococcus aureus). Cytotoxicity of the Sg-CuO NPs was determined using anIC50 of 37 μg/mL. Sg-CuO NPs have shown promising anti-diabetic, anti-oxidant, protein degradation-inhibiting, and anti-microbial properties. Our findings have shown that synthesized Sg-CuO NPs have biological activities that may be utilized to treat bacterial infections linked to hyperglycemia.

Carbon-based nanostructures for cancer therapy and drug delivery applications

Synthesis, design, characterization, and application of carbon-based nanostructures (CBNSs) as drug carriers have attracted a great deal of interest over the past half of the century because of their promising chemical, thermal, physical, optical, mechanical, and electrical properties and their structural diversity. CBNSs are well-known in drug delivery applications due to their unique features such as easy cellular uptake, high drug loading ability, and thermal ablation. CBNSs, including carbon nanotubes, fullerenes, nanodiamond, graphene, and carbon quantum dots have been quite broadly examined for drug delivery systems. This review not only summarizes the most recent studies on developing carbon-based nanostructures for drug delivery (e.g. delivery carrier, cancer therapy and bioimaging), but also tries to deal with the challenges and opportunities resulting from the expansion in use of these materials in the realm of drug delivery. This class of nanomaterials requires advanced techniques for synthesis and surface modifications, yet a lot of critical questions such as their toxicity, biodistribution, pharmacokinetics, and fate of CBNSs in biological systems must be answered.

Construction of a Copper Bismuthate/Graphene Nanocomposite for Electrochemical Detection of Catechol

Binary metal oxides with carbon nanocomposites have received extensive attention as research hotspots in the electrochemistry field owing to their tunable properties and superior stability. This work illustrates the development of a facile sonochemical strategy for the synthesis of a copper bismuthate/graphene (GR) nanocomposite-modified screen-printed carbon electrode (CBO/GR/SPCE) for the electrochemical detection of catechol (CT). The formation of an as-prepared CBO/GR nanocomposite was comprehensively characterized. The electrochemical behavior of the CBO/GR/SPCE toward CT was investigated by voltammetry and amperometry techniques. The fabricated CBO/GR/SPCE manifests an excellent electrocatalytic performance toward CT with a lower peak potential and a higher current value compared to those of CBO/SPCE, GR/SPCE, and bare SPCE. It is attributed to enhanced electro-catalytic activity, synergetic effects, and good active sites of the CBO/GR nanocomposite. Under the electrochemical condition, the CBO/GR/SPCE displayed a wide linear sensing range, trace-level detection limit, acceptable sensitivity, and excellent selectivity. Furthermore, our proposed CBO/GR electrode was employed successfully for CT detection in water samples.

Plant Extract-Based Synthesis of Metallic Nanomaterials, Their Applications, and Safety Concerns

Nanotechnology has attracted the attention of researchers from different scientific fields because of the escalated properties of nanomaterials compared with the properties of macromolecules. Nanomaterials can be prepared through different approaches involving physical and chemical methods. The development of nanomaterials through plant-based green chemistry approaches is more advantageous than other methods from the perspectives of environmental safety, animal, and human health. The biomolecules and metabolites of plants act as reducing and capping agents for the synthesis of metallic green nanomaterials. Plant-based synthesis is a preferred approach as it is not only cost-effective, easy, safe, clean, and eco-friendly but also provides pure nanomaterials in high yield. Since nanomaterials have antimicrobial and antioxidant potential, green nanomaterials synthesized from plants can be used for a variety of biomedical and environmental remediation applications. Past studies have focused mainly on the overall biogenic synthesis of individual or combinations of metallic nanomaterials and their oxides from different biological sources, including microorganisms and biomolecules. Moreover, from the viewpoint of biomedical applications, the literature is mainly focusing on synthetic nanomaterials. Herein, we discuss the extraction of green molecules and recent developments in the synthesis of different plant-based metallic nanomaterials, including silver, gold, platinum, palladium, copper, zinc, iron, and carbon. Apart from the biomedical applications of metallic nanomaterials, including antimicrobial, anticancer, diagnostic, drug delivery, tissue engineering, and regenerative medicine applications, their environmental remediation potential is also discussed. Furthermore, safety concerns and safety regulations pertaining to green nanomaterials are also discussed. This article is protected by copyright. All rights reserved.

Impact of drug aggregation on the structural and dynamic properties of Triton X-100 micelles

Surfactants are used in a wide range of chemical and biological applications, and for pharmaceutical purposes are frequently employed to enhance the solubility of poorly water soluble drugs. In this study, all-atom molecular dynamics (MD) simulations and small-angle neutron scattering (SANS) experiments have been used to investigate the drug solubilisation capabilities of the micelles that result from 10 wt% aqueous solutions of the non-ionic surfactant, Triton X-100 (TX-100). Specifically, we have investigated the solubilisation of saturation amounts of the sodium salts of two nonsteroidal anti-inflammatory drugs: ibuprofen and indomethacin. We find that the ibuprofen-loaded micelles are more non-spherical than the indomethacin-loaded micelles which are in turn even more non-spherical than the TX-100 micelles that form in the absence of any drug. Our simulations show that the TX-100 micelles are able to solubilise twice as many indomethacin molecules as ibuprofen molecules, and the indomethacin molecules form larger aggregates in the core of the micelle than ibuprofen. These large indomethacin aggregates result in the destabilisation of the TX-100 micelle, which leads to an increase in the amount of water inside of the core of the micelle. These combined effects cause the eventual division of the indomethacin-loaded micelle into two daughter micelles. These results provide a mechanistic description of how drug interactions can affect the stability of the resulting nanoparticles.

Impact of metallic coating on the retention of 225Ac and its daugthers within core-shell nanocarriers

Currently, alpha-emitting radionuclide 225Ac is one of the most promising isotopes in alpha therapy due to its high linear energy transfer during four sequential alpha decays. However, the main obstacle preventing the full introduction of 225Ac into clinical practice is the lack of stable retention of radionuclides, leading to free circulation of toxic isotopes in the body. In this work, the surface of silica nanoparticles (SiO2 NPs) has been modified with metallic shells composed of titanium dioxide (TiO2) and gold (Au) nanostructures to improve the retention of 225Ac and its decay products within the developed nanocarriers. In vitro and in vivo studies in healthy mice show that the metallic surface coating of SiO2 NPs promotes an enhanced sequestering of radionuclides (225Ac and its daughter isotopes) compared to non-modified SiO2 NPs for a prolonged period of time. Histological analysis reveals that for the period of 3-10 d after the injections, the developed nanocarriers have no significant toxic effects in mice. At the same time, almost no accumulation of leaked radionuclides can be detected in non-target organs (e.g., in the kidneys). In contrast, non-modified carriers (SiO2 NPs) demonstrate the release of free radionuclides, which are distributed over the whole animal body with the consequent morphological changes in the lung, liver and kidney tissues. These results highlight the potential of the developed nanocarriers to be utilized as radionuclide delivery systems and offer an insight into design rules for the fabrication of new nanotherapeutic agents.

Carbon nanotubes in biomedical applications: current status, promises, and challenges

In the past decade, there has been phenomenal progress in the field of nanomaterials, especially in the area of carbon nanotubes (CNTs). In this review, we have elucidated a contemporary synopsis of properties, synthesis, functionalization, toxicity, and several potential biomedical applications of CNTs. Researchers have reported remarkable mechanical, electronic, and physical properties of CNTs which makes their applications so versatile. Functionalization of CNTs has been valuable in modifying their properties, expanding their applications, and reducing their toxicity. In recent years, the use of CNTs in biomedical applications has grown exponentially as they are utilized in the field of drug delivery, tissue engineering, biosensors, bioimaging, and cancer treatment. CNTs can increase the lifespan of drugs in humans and facilitate their delivery directly to the targeted cells; they are also highly efficient biocompatible biosensors and bioimaging agents. CNTs have also shown great results in detecting the SARS COVID-19 virus and in the field of cancer treatment and tissue engineering which is substantially required looking at the present conditions. The concerns about CNTs include cytotoxicity faced in in vivo biomedical applications and its high manufacturing cost are discussed in the review.

Au-O-MWCNTs and TiO2-O-MWCNTs as Efficient Nanocarriers for Dexamethasone: Adsorption Isotherms and Kinetic Studies

In this research, the fabrication of drug delivery systems based on oxidized multiwall carbon nanotubes (O-MWCNTs) was studied. Herein, TiO2 and Au were conjugated with O-MWCNTs to prepare efficient nanocarriers for dexamethasone (dex). The samples were characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). In addition, dex loading was studied using adsorption isotherms including Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich. The results show that dex adsorption agreed well with the Freundlich isotherm. Increasing the TiO2 to O-MWCNT ratio from (1 : 4) to (1 : 2) can improve the adsorption capacity from $290\text{mg}\cdot {\text{g}}^{-1}$ to 320 $320\text{mg}\cdot {\text{g}}^{-1}$ . The increasing Au amount increases the adsorption capacity from $437.78\text{mg}\cdot {\text{g}}^{-1}$ (SA1) to maximum $476.19\text{mg}\cdot {\text{g}}^{-1}$ (SA6). The maximum equilibrium binding energy $A_T$ $\left(1.67\text{L}\cdot {\text{mg}}^{-1}\right)$ was obtained for SA2, and SA7 shows high binding strength between dex and the nanoadsorbent. Carbon nanotubes (CNTs) show good affinity with high loading capabilities for dexamethasone adsorption. The synthesized TiO2-O-MWCNTs:1/2 with the maximum removal percent (80%) was proposed as an appropriate nanocarrier for dexamethasone. Pseudo-first order, pseudo-second order, Elovich, and intraparticle diffusion models were investigated for all synthesized drug nanocarriers. According to regression coefficients, experimental data are in good agreement with the pseudo-second order model for all adsorbents except O-MWCNT/CTAB. Experimental results revealed that the Elovich model could account for the O-MWCNT/CTAB adsorbent.

Controlling morphology evolution of titanium oxide-gold nanourchin for photocatalytic degradation of dyes and photoinactivation of bacteria in the infected wound

We report a one-pot, room-temperature, morphology-controlled synthesis of titanium oxide (TiO_x)-gold nanocomposites (TiO_x-Au NCs) using HAuCl₄ and TiCl₃ as precursors, and catechin as reducing agent. TiO_x-Au NCs have a range of morphologies from star-like to urchin-like shape depending on the concentration of TiCl₃ in the reaction mixture. The urchin-shaped TiO_x-Au NCs exhibited excellent photocatalytic activity toward dye degradation due to strong light absorption, plasmon-induced excitation, high conductivity of the gold, and reduced hole-electron pair recombination. TiO_x-Au NCs have the advantage of a wide range of light absorption and surface plasmon absorption-mediated excitation due to their abundant gold spikes, which enabled the degradation of dyes over 97% in 60 min, using a xenon lamp as a light source. In addition, TiO_x-Au NCs are highly efficient for the photoinactivation of Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA), and Candida albicans through the photodynamic generation of reactive oxygen species (ROS) and damage to the bacterial membrane. The catechin derivatives on the NCs effectively promoted curing MRSA infected wounds in rats through inducing collagen synthesis, migration of keratinocytes, and neovascularization.

RhBMP-2-Loaded PLGA/Titanium Nanotube Delivery System Synergistically Enhances Osseointegration

Although Ti-based implants have been widely used, osseointegration failure can also be found between implants and the surrounding bone tissue, especially in aged patients or in patients with certain systemic diseases. Therefore, in this research, we establish a sustained rhBMP-2 delivery system on a titanium implant surface, an anodic oxidation TiO2 nanotube layer combined with the PLGA film, to enhance osseointegration. This designed system was characterized as follows: surface topography characterization by SEM and AFM; rhBMP-2 release; and the ability to influence MC3T3 cell adhesion, proliferation, and osteogenic differentiation in vitro. Additionally, we evaluated the ability of this system to generate new bone around implants in rabbit tibias by the histological assay and removal torque test. SEM and AFM showed that PLGA membranes were formed on the surfaces of TiO2 nanotube arrays using 1, 3, and 10% PLGA solutions. The 3% PLGA group showed a perfect sustained release of rhBMP-2, lasting for 28 days. Meanwhile, the 3% PLGA group showed improved cell proliferation and osteogenic mRNA expression levels. In the in vivo experiments, the 3% PLGA group had the ability to promote osteogenesis in experimental animals. The anodized TiO2 nanotube coated with a certain thickness of the PLGA layer was an ideal and suitable rhBMP-2 carrier. This modified surface enhances osseointegration and could be useful in clinical dental implant treatment.

Advances in Drug Delivery Nanosystems Using Graphene-Based Materials and Carbon Nanotubes

Carbon is one of the most abundant elements on Earth. In addition to the well-known crystallographic modifications such as graphite and diamond, other allotropic carbon modifications such as graphene-based nanomaterials and carbon nanotubes have recently come to the fore. These carbon nanomaterials can be designed to help deliver or target drugs more efficiently and to innovate therapeutic approaches, especially for cancer treatment, but also for the development of new diagnostic agents for malignancies and are expected to help combine molecular imaging for diagnosis with therapies. This paper summarizes the latest designed drug delivery nanosystems based on graphene, graphene quantum dots, graphene oxide, reduced graphene oxide and carbon nanotubes, mainly for anticancer therapy.

Antimicrobial and anti-adhesive properties of carbon nanotube-based surfaces for medical applications: a systematic review

Although high-performance carbon materials are widely used in surface engineering, with emphasis on carbon nanotubes (CNTs), the application of CNT nanocomposites on medical surfaces is poorly documented. In this study, we aimed to evaluate the antimicrobial and anti-adhesive properties of CNT-based surfaces. For this purpose, a PRISMA-oriented systematic review was conducted based on predefined criteria and 59 studies were selected for the qualitative analysis. Results from the analyzed studies suggest that surfaces containing modified CNTs, and specially CNTs conjugated with different polymers, exhibited strong antimicrobial and anti-adhesive activities. These composites seem to preserve the CNT toxicity to microorganisms and promote CNT-cell interactions, as well as to protect them from nonspecific protein adsorption. However, CNTs cannot yet compete with the conventional strategies to fight biofilms as their toxicity profile on the human body has not been thoroughly addressed. This review can be helpful for the development of new engineered medical surfaces.

Facile synthesis of gold and platinum doped titanium oxide nanoparticles for antibacterial and photocatalytic activity: A photodynamic approach

A simple method has been needed to synthesize nanoparticles (NPs) to avoid environmental pollution, an alternative chemical and physical method. This current study deals with phytosynthesis of gold (Au) and platinum (Pt) metal doped with titanium oxide (TiO₂) NPs using Enterolobium saman bark extract. This extract plays a vital role in reducing and stabilizing Au and Pt doped into the TiO₂ NPs lattices. Phytosynthesized samples were characterized by XRD, SEM, ED-XRF, TEM, FTIR, Raman, and UV-vis-DRS analyses. The metal doping effect has decreased bandgap energy and particle size, whereas increased conductivity for TiO₂/M-Au and TiO₂/M-Pt NPs compared to pristine TiO₂ NPs. Phytosynthesized NPs were fabricated for dye-sensitized solar cell (DSSC) and photocatalytic behaviour against methylene blue (MB) dye was studied. An obtained result demonstrates that TiO₂/M-Au NPs have excellent feasibility for applying DSSC and photocatalytic application due to particle size, crystallite size, absorption ability, and bandgap energy. Besides, synthesized samples were measured with cyclic voltammetry and impedance spectroscopy found that the metal doping is drifted the dielectric and increases that the metal doping is drifted the dielectric increases electro-catalytic of the TiO₂. Different concentrations of all NPs were tested against Escherichia coli MTCC 40 and S. aureus ATCC 6633 bacteria by a well-diffusion method. The 10 mg concentration of all NPs showed better antibacterial activity. However, we believe that the proposed simple phytosynthesized method provides an efficient way to overcome the chemical and physical methods.

Chitosan overlaid Fe3O4/rGO nanocomposite for targeted drug delivery, imaging, and biomedical applications

A hybrid and straightforward nanosystem that can be used simultaneously for cancer-targeted fluorescence imaging and targeted drug delivery in vitro was reported in this study. A chitosan (CS) polymer coated with reduced graphene oxide (rGO) and implanted with Fe3O4 nanoparticles was fabricated. The fundamental physicochemical properties were confirmed via FT-IR, XRD, FE-SEM, HR-TEM, XPS, and VSM analysis. The in vivo toxicity study in zebrafish showed that the nanocomposite was not toxic. The in vitro drug loading amount was 0.448 mg/mL-1 for doxorubicin, an anticancer therapeutic, in the rGO/Fe3O4/CS nanocomposite. Furthermore, the pH-regulated release was observed using folic acid. Cellular uptake and multimodal imaging revealed the benefit of the folic acid-conjugated nanocomposite as a drug carrier, which remarkably improves the doxorubicin accumulation inside the cancer cells over-express folate receptors. The rGO/Fe3O4/CS nanocomposite showed enhanced antibiofilm and antioxidant properties compared to other materials. This study's outcomes support the use of the nanocomposite in targeted chemotherapy and the potential applications in the polymer, cosmetic, biomedical, and food industries.

Preparation, characterisation and biological evaluation of biopolymer-coated multi-walled carbon nanotubes for sustained-delivery of silibinin

This research work represents the first major step towards constructing an effective therapeutic silibinin (SB) in cancer treatment using oxidised multi-walled carbon nanotubes (MWCNT-COOH) functionalised with biocompatible polymers as the potential drug carrier. In an attempt to increase the solubility and dispersibility of SB-loaded nanotubes (MWSB), four water-soluble polymers were adopted in the preparation process, namely polysorbate 20 (T20), polysorbate 80 (T80), polyethylene glycol (PEG) and chitosan (CHI). From the geometry point of view, the hydrophobic regions of the nanotubes were loaded with water-insoluble SB while the hydrophilic polymers functionalised on the outer surfaces of the nanotubes serve as a protective shell to the external environment. The chemical interaction between MWSB nanocomposites and polymer molecules was confirmed by Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. Besides, high-resolution transmission electron microscopy (HR-TEM), field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA) and UV–visible spectrophotometry were also employed to characterise the synthesised nanocomposites. The morphological study indicated that the polymers were deposited on the external surfaces of MWSB and the nanocomposites were seen to preserve their tubular structures even after the coating process was applied. The TGA results revealed that the incorporation of biopolymers practically improved the overall thermal stability of the coated MWSB nanocomposites. Evaluation of the in vitro effect on drug release rate by the nanocomposites was found to follow a biphasic release manner, showing a fast release at an initial stage and then a sustained-release over 2500 min. Besides, the drug release mechanisms of the nanocomposites demonstrated that the amount of SB released in the simulated environment was governed by pseudo-second order in which, the rate-limiting step mainly depends on diffusion of drug through chemisorption reaction. Finally, MTT assay showed that the coated MWSB nanocomposites on 3T3 cells were very much biocompatible at a concentration up to 100 g/mL, which is an evidence of MWSB reduced cytotoxicity.

Sequential release of immunomodulatory cytokines binding on nano-hydroxyapatite coated titanium surface for regulating macrophage polarization and bone regeneration

Inflammation occurs when the material is implanted into the body. As one of the important immune cells in the regulation of inflammation, macrophages are able to remove pathogens and necrotic cells, and polarize to different phenotypes to regulate inflammatory response for tissue regeneration. Therefore, it is known that the sequential release of immunomodulatory cytokines from the surface of titanium (Ti) implants can regulate the polarization of macrophages and promote osseointegration of implants. In order to control the switch of macrophage phenotypes at desired time, we fabricated hydroxyapatite (HAp) nanotube arrays coating on Ti surface, by acid-etching, alkali-heating and HAp coating sequentially. Then we loaded the interleukin-4 (IL-4) encapsulated by poly (lactic-co-glycolic acid) (PLGA) on the bottom of the nanotube and the interferon-γ (IFN-γ) encapsulated by sodium hyaluronate (SH) on the top of the nanotube. Based on the physical and chemical properties of PLGA and SH and the spatial distribution of loaded cytokines, we hypothesized that the programmed release of IFN-γ and IL-4, which made the phenotypic transition of macrophages at a specific time, so as to regulate inflammation and promote osteogenic repair. Our hypothesis created a new type of drug sustained release system, which has high research value for improving the osseointegration of implants.

An Amphiphilic Micromolecule Self-Assembles into Vesicles for Visualized and Targeted Drug Delivery

Described here is the first example of the construction of multifunctional drug delivery systems by employing an amphiphilic micromolecule. The intrinsic aggregation-induced emissive and tumor-targeting amphiphilic conjugate of β-d-galactose with tetraphenylethene (TPE-Gal), in which the hydrophobic TPE moiety spontaneously acts as the imaging chromophore and the hydrophilic Gal moiety spontaneously acts as the targeting ligand and galactosidase trigger, can self-assemble into fluorescent vesicles that can efficiently load both water-soluble and -insoluble anticancer drugs. In vitro and in vivo evaluations revealed that the pH/β-d-galactosidase dual-responsive doxorubicin (DOX)-loaded vesicles TPE-Gal@DOX exhibited good targeting effect and higher antitumor efficacy than free DOX. H&E staining analysis displayed remarkable necroses and weak cell proliferation in the tumor area and no toxicity to major organs, indicating the superior targeting antitumor therapeutic efficacy of TPE-Gal@DOX.

Synthetic strategies in construction of organic macromolecular carrier-drug conjugates

Many metabolic inhibitors, considered potential antimicrobial or anticancer drug candidates, exhibit very limited ability to cross the biological membranes of target cells. The restricted cellular penetration of those molecules is often due to their highhydrophilicity. One of the possible solutions to this problem is a conjugation of an inhibitor with a molecular organic nanocarrier. The conjugate thus formed should be able to penetrate the membrane(s) by direct translocation, endocytosis or active transport mechanisms and once internalized, the active component could reach its intracellular target, either after release from the conjugate or in an intact form. Several such nanocarriers have been proposed so far, including macromolecular systems, carbon nanotubes and dendrimers. Herein, we present a comprehensive review of the current status of rational design and synthesis of macromolecular organic nanocarrier-drug conjugates, with special attention focused on the mode of coupling of a nanocarrier moiety with a "cargo" molecule through linking fragments of non-cleavable or cleavable type.

Nanomaterials and Their Negative Effects on Human Health

Mesostructured silica, dendrimers, and allotropes of carbon were exhaustively used in biomedical, cosmetics, semiconductors, and food industry applications. Considering the huge prospect of nanomaterials, their potential hazards on exposure to humans and their related ecotoxicological effects needs to be summarized. Nanoparticles with size below 100 nm could pass into the lung and then to blood through inhalation, ingestion, and skin contact. As nanotechnology innovation is expected to achieve $ 2231 million by 2025, humans will be exposed ever increasingly in day-to-day life and in industries. In this review, the latest synthetic methodology of silica, dendrimers, and CNTs, their biological applications (in vitro and in vivo) related to toxicity were discussed. In terms of structured silica, the toxic and non-toxic effect induced by specific templates (cetylpyridinium bromide, cetyltrimethylammonium bromide, dipalmitoylphosphatidylcholine, C16L-tryptophan, C16-L-histidine, and C16-L-poline) that are used to generate mesoporous silica, silica nanoparticle sizes (25, 50, 60, 115, and 500 nm), and silane functionalization (NH₂ and COOH) were discussed. The recent applications of different generations (G3, G4, G5, and G6) of amphiphilic Janus dendrimers were discussed along with toxicity effect of different charged dendrimers (cationic and anionic) and effect of PEGylation. Recent synthesis, advantages, and disadvantages of carbon nanotubes (CNTs) were presented for structures like single walled carbon nanotubes (SWCNTs) and multiwalled carbon nanotubes (MWCNTs). The influence of diameter of SWCNTs (linear and short), thickness (thin and thick), effect of oxidation, metal oxide species (TiO₂, Fe, and Au), and biocompatible polymers (polyethylene glycol, bisphosphonate, and alendronate) were shown in relation to molecular pathways in animal cells.

Recent developments in the use of organic-inorganic nanohybrids for drug delivery

Organic-inorganic nanohybrid (OINH) structures providing a versatile platform for drug delivery with improved characteristics are an area which has gained recent attention. Much effort has been taken to develop these structures to provide a viable treatment options for much alarming diseases such as cancer, bone destruction, neurological disorders, and so on. This review focuses on current work carried out in producing different types of hybrid drug carriers identifying their properties, fabrication techniques, and areas where they have been applied. A brief introduction on understating the requirement for blending organic-inorganic components into a nanohybrid drug carrier is followed with an elaboration given about the different types of OINHs developed currently highlighting their properties and applications. Then, different fabrication techniques are discussed given attention to surface functionalization, one-pot synthesis, wrapping, and electrospinning methods. Finally, it is concluded by briefing the challenges that are remaining to be addressed to obtain multipurpose nanohybrid drug carriers with wider applicability. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Functionalization of Carbon Nanomaterials for Biomedical Applications

Over the past decade, carbon nanostructures (CNSs) have been widely used in a variety of biomedical applications. Examples are the use of CNSs for drug and protein delivery or in tools to locally dispense nucleic acids to fight tumor affections. CNSs were successfully utilized in diagnostics and in noninvasive and highly sensitive imaging devices thanks to their optical properties in the near infrared region. However, biomedical applications require a complete biocompatibility to avoid adverse reactions of the immune system and CNSs potentials for biodegradability. Water is one of the main constituents of the living matter. Unfortunately, one of the disadvantages of CNSs is their poor solubility. Surface functionalization of CNSs is commonly utilized as an efficient solution to both tune the surface wettability of CNSs and impart biocompatible properties. Grafting functional groups onto the CNSs surface consists in bonding the desired chemical species on the carbon nanoparticles via wet or dry processes leading to the formation of a stable interaction. This latter may be of different nature as the van Der Waals, the electrostatic or the covalent, the π-π interaction, the hydrogen bond etc. depending on the process and on the functional molecule at play. Grafting is utilized for multiple purposes including bonding mimetic agents such as polyethylene glycol, drug/protein adsorption, attaching nanostructures to increase the CNSs opacity to selected wavelengths or provide magnetic properties. This makes the CNSs a very versatile tool for a broad selection of applications as medicinal biochips, new high-performance platforms for magnetic resonance (MR), photothermal therapy, molecular imaging, tissue engineering, and neuroscience. The scope of this work is to highlight up-to-date using of the functionalized carbon materials such as graphene, carbon fibers, carbon nanotubes, fullerene and nanodiamonds in biomedical applications.

Current trends and challenges in cancer management and therapy using designer nanomaterials

Nanotechnology has the potential to circumvent several drawbacks of conventional therapeutic formulations. In fact, significant strides have been made towards the application of engineered nanomaterials for the treatment of cancer with high specificity, sensitivity and efficacy. Tailor-made nanomaterials functionalized with specific ligands can target cancer cells in a predictable manner and deliver encapsulated payloads effectively. Moreover, nanomaterials can also be designed for increased drug loading, improved half-life in the body, controlled release, and selective distribution by modifying their composition, size, morphology, and surface chemistry. To date, polymeric nanomaterials, metallic nanoparticles, carbon-based materials, liposomes, and dendrimers have been developed as smart drug delivery systems for cancer treatment, demonstrating enhanced pharmacokinetic and pharmacodynamic profiles over conventional formulations due to their nanoscale size and unique physicochemical characteristics. The data present in the literature suggest that nanotechnology will provide next-generation platforms for cancer management and anticancer therapy. Therefore, in this critical review, we summarize a range of nanomaterials which are currently being employed for anticancer therapies and discuss the fundamental role of their physicochemical properties in cancer management. We further elaborate on the topical progress made to date toward nanomaterial engineering for cancer therapy, including current strategies for drug targeting and release for efficient cancer administration. We also discuss issues of nanotoxicity, which is an often-neglected feature of nanotechnology. Finally, we attempt to summarize the current challenges in nanotherapeutics and provide an outlook on the future of this important field.

Small molecular target-based multifunctional upconversion nanocomposites for targeted and in-depth photodynamic and chemo-anticancer therapy

A novel multifunctional nano-system, ZnPc-UCNPs-PEG-G, was designed for targeted and in-depth photodynamic therapy. The nano-system was built via covalent conjugation, in which phthalocyanine zinc (ZnPc), Gefitinib (G), NaYF₄: Yb, Er (UCNPs) and PEG derivatives were employed as the photosensitizer, target moiety, upconversion nanomaterial and linker unit, respectively. The photophysical/chemical properties, in-depth photodynamic activity, cancer cell specificity and anticancer activity of ZnPc-UCNPs-PEG-G were investigated. The as-prepared ZnPc-UCNPs-PEG-G exhibits excellent photosensitizing ability, generating reactive oxygen species (ROS) via effective energy transfer from UCNP to phthalocyanine zinc. In addition, the composite exhibits specific affinity to HepG2 cancer cells and high anticancer activity. To the best of our knowledge, this is the only example of a UCNP platform that is capable of molecular targeted and in-depth photodynamic and chemo-anticancer therapy via the introduction of a small molecular targeting drug moiety.

Advanced biomedical applications of carbon nanotube

With advances in nanotechnology, the applications of nanomaterial are developing widely and greatly. The characteristic properties of carbon nanotubes (CNTs) make them the most selective candidate for various multi-functional applications. The greater surface area of the CNTs in addition to the capability to manipulate the surfaces and dimensions has provided greater potential for this nanomaterial. The CNTs possess greater potential for applications in biomedicine due to their vital electrical, chemical, thermal, and mechanical properties. The unique properties of CNT are exploited for numerous applications in the biomedical field. They are useful in both therapeutic and diagnostic applications. They form novel carrier systems which are also capable of site-specific delivery of therapeutic agents. In addition, CNTs are of potential application in biosensing. Many recently reported advanced systems of CNT could be exploited for their immense potential in biomedicine in the future.

Advances in Therapeutic Implications of Inorganic Drug Delivery Nano-Platforms for Cancer

Numerous nanoparticles drug delivery systems for therapeutic implications in cancer treatment are in preclinical development as conventional chemotherapy has several drawbacks. A chemotherapeutic approach requires high doses of chemotherapeutic agents with low bioavailability, non-specific targeting, and above all, development of multiple drug resistance. In recent years, inorganic nano-drug delivery platforms (NDDPs; with a metal core) have emerged as potential chemotherapeutic systems in oncology. One of the major goals of developing inorganic NDDPs is to effectively address the targeted anti-cancer drug(s) delivery related problems by carrying the therapeutic agents to desired tumors sites. In this current review, we delve into summarizing the recent developments in targeted release of anti-cancer drugs loaded in inorganic NDDPs such as mesoporous silica nanoparticles, carbon nanotubes, layered double hydroxides, superparamagnetic iron oxide nanoparticles and calcium phosphate nanoparticles together with highlighting their therapeutic performance at tumor sites.

"Chocolate" Gold Nanoparticles-One Pot Synthesis and Biocompatibility

The chemical synthesis of nanoparticles can involve and generate toxic materials. Here, we present for the first time, a one pot direct route to synthesize gold nanoparticles (AuNPs) using natural cacao extract as both a reducing and stabilizing agent. The nanoparticles were characterized by UV-visible spectroscopy (UV-VIS), dynamic light scattering (DLS), and transmission electron microscopy (TEM); and have excellent biocompatibility with human primary dermal fibroblasts.