Electroactive biomaterial surface engineering effects on muscle cells differentiation

Role of Surface Dipole Alignment in Modulating Cellular Activities on Poly(vinylidene fluoride)

Understanding and controlling the surface properties of bioscaffolds are crucial for regulating cell adhesion and proliferation behaviors. We here focused on poly(vinylidene fluoride) (PVDF), in which polymer chains are oriented through poling treatment to form a polar β-form crystal. The surface aggregation states of uniaxially stretched PVDF films subjected to poling treatment were investigated based on water contact angle measurements and sum-frequency generation spectroscopy. During poling treatment under a sufficiently strong electric field, the dipole moments of β-form crystals, which are inherently aligned within each crystalline domain, become more uniformly oriented across the entire film. As a result, the surface resists structural reorganization even upon exposure to water. This stable surface, which maintains its aggregation states despite environmental changes, was found to promote cell adhesion and proliferation, as well as protein adsorption. Our findings contribute to a deeper understanding of the relationship between the aggregation states on polymer scaffold surfaces and protein interactions, ultimately advancing insights into cell behaviors.

The surface charge of electroactive materials governs cell behaviour through its effect on protein deposition

The precise mechanisms underlying the cellular response to static electric cues remain unclear, limiting the design and development of biomaterials that utilize this parameter to enhance specific biological behaviours. To gather information on this matter we have explored the interaction of collagen type-I, the most abundant mammalian extracellular protein, with poly(vinylidene fluoride) (PVDF), an electroactive polymer with great potential for tissue engineering applications. Our results reveal significant differences in collagen affinity, conformation, and interaction strength depending on the electric charge of the PVDF surface, which subsequently affects the behaviour of mesenchymal stem cells seeded on them. These findings highlight the importance of surface charge in the establishment of the material-protein interface and ultimately in the biological response to the material. STATEMENT OF SIGNIFICANCE: The development of new tissue engineering strategies relies heavily on the understanding of how biomaterials interact with biological tissues. Although several factors drive this process and their driving principles have been identified, the relevance and mechanism by which the surface potential influences cell behaviour is still unknown. In our study, we investigate the interaction between collagen, the most abundant component of the extracellular matrix, and poly(vinylidene fluoride) with varying surface charges. Our findings reveal substantial variations in the binding forces, structure and adhesion of collagen on the different surfaces, which collectively explain the differential cellular responses. By exposing these differences, our research fills a critical knowledge gap and paves the way for innovations in material design for advanced tissue regeneration strategies.

From electricity to vitality: the emerging use of piezoelectric materials in tissue regeneration

The unique ability of piezoelectric materials to generate electricity spontaneously has attracted widespread interest in the medical field. In addition to the ability to convert mechanical stress into electrical energy, piezoelectric materials offer the advantages of high sensitivity, stability, accuracy and low power consumption. Because of these characteristics, they are widely applied in devices such as sensors, controllers and actuators. However, piezoelectric materials also show great potential for the medical manufacturing of artificial organs and for tissue regeneration and repair applications. For example, the use of piezoelectric materials in cochlear implants, cardiac pacemakers and other equipment may help to restore body function. Moreover, recent studies have shown that electrical signals play key roles in promoting tissue regeneration. In this context, the application of electrical signals generated by piezoelectric materials in processes such as bone healing, nerve regeneration and skin repair has become a prospective strategy. By mimicking the natural bioelectrical environment, piezoelectric materials can stimulate cell proliferation, differentiation and connection, thereby accelerating the process of self-repair in the body. However, many challenges remain to be overcome before these concepts can be applied in clinical practice, including material selection, biocompatibility and equipment design. On the basis of the principle of electrical signal regulation, this article reviews the definition, mechanism of action, classification, preparation and current biomedical applications of piezoelectric materials and discusses opportunities and challenges for their future clinical translation.

Biomaterials-Based Technologies in Skeletal Muscle Tissue Engineering

For many clinically prevalent severe injuries, the inherent regenerative capacity of skeletal muscle remains inadequate. Skeletal muscle tissue engineering (SMTE) seeks to meet this clinical demand. With continuous progress in biomedicine and related technologies including micro/nanotechnology and 3D printing, numerous studies have uncovered various intrinsic mechanisms regulating skeletal muscle regeneration and developed tailored biomaterial systems based on these understandings. Here, the skeletal muscle structure and regeneration process are discussed and the diverse biomaterial systems derived from various technologies are explored in detail. Biomaterials serve not merely as local niches for cell growth, but also as scaffolds endowed with structural or physicochemical properties that provide tissue regenerative cues such as topographical, electrical, and mechanical signals. They can also act as delivery systems for stem cells and bioactive molecules that have been shown as key participants in endogenous repair cascades. To achieve bench-to-bedside translation, the typical effect enabled by biomaterial systems and the potential underlying molecular mechanisms are also summarized. Insights into the roles of biomaterials in SMTE from cellular and molecular perspectives are provided. Finally, perspectives on the advancement of SMTE are provided, for which gene therapy, exosomes, and hybrid biomaterials may hold promise to make important contributions.

Scaffold-Based Poly(Vinylidene Fluoride) and Its Copolymers: Materials, Fabrication Methods, Applications, and Perspectives

Tissue engineering involves implanting grafts into damaged tissue sites to guide and stimulate the formation of new tissue, which is an important strategy in the field of tissue defect treatment. Scaffolds prepared in vitro meet this requirement and are able to provide a biochemical microenvironment for cell growth, adhesion, and tissue formation. Scaffolds made of piezoelectric materials can apply electrical stimulation to the tissue without an external power source, speeding up the tissue repair process. Among piezoelectric polymers, poly(vinylidene fluoride) (PVDF) and its copolymers have the largest piezoelectric coefficients and are widely used in biomedical fields, including implanted sensors, drug delivery, and tissue repair. This paper provides a comprehensive overview of PVDF and its copolymers and fillers for manufacturing scaffolds as well as the roles in improving piezoelectric output, bioactivity, and mechanical properties. Then, common fabrication methods are outlined such as 3D printing, electrospinning, solvent casting, and phase separation. In addition, the applications and mechanisms of scaffold-based PVDF in tissue engineering are introduced, such as bone, nerve, muscle, skin, and blood vessel. Finally, challenges, perspectives, and strategies of scaffold-based PVDF and its copolymers in the future are discussed.

CHRONIC CRITICAL ILLNESS-INDUCED MUSCLE ATROPHY: INSIGHTS FROM A TRAUMA MOUSE MODEL AND POTENTIAL MECHANISM MEDIATED VIA SERUM AMYLOID A

ABSTRACT

Background: Chronic critical illness (CCI), which was characterized by persistent inflammation, immunosuppression, and catabolism syndrome (PICS), often leads to muscle atrophy. Serum amyloid A (SAA), a protein upregulated in critical illness myopathy, may play a crucial role in these processes. However, the effects of SAA on muscle atrophy in PICS require further investigation. This study aims to develop a mouse model of PICS combined with bone trauma to investigate the mechanisms underlying muscle weakness, with a focus on SAA. Methods: Mice were used to examine the effects of PICS after bone trauma on immune response, muscle atrophy, and bone healing. The mice were divided into two groups: a bone trauma group and a bone trauma with cecal ligation and puncture group. Tibia fracture surgery was performed on all mice, and PICS was induced through cecal ligation and puncture surgery in the PICS group. Various assessments were conducted, including weight change analysis, cytokine analysis, hematological analysis, grip strength analysis, histochemical staining, and immunofluorescence staining for SAA. In vitro experiments using C2C12 cells (myoblasts) were also conducted to investigate the role of SAA in muscle atrophy. The effects of inhibiting receptor for advanced glycation endproducts (RAGE) or JAK2 on SAA-induced muscle atrophy were examined. Bioinformatic analysis was conducted using a dataset from the GEO database to identify differentially expressed genes and construct a coexpression network. Results: Bioinformatic analysis confirmed that SAA was significantly upregulated in muscle tissue of patients with intensive care unit-induced muscle atrophy. The PICS animal models exhibited significant weight loss, spleen enlargement, elevated levels of proinflammatory cytokines, and altered hematological profiles. Evaluation of muscle atrophy in the animal models demonstrated decreased muscle mass, grip strength loss, decreased diameter of muscle fibers, and significantly increased expression of SAA. In vitro experiment demonstrated that SAA decreased myotube formation, reduced myotube diameter, and increased the expression of muscle atrophy-related genes. Furthermore, SAA expression was associated with activation of the FOXO signaling pathway, and inhibition of RAGE or JAK2/STAT3-FOXO signaling partially reversed SAA-induced muscle atrophy. Conclusions: This study successfully develops a mouse model that mimics PICS in CCI patients with bone trauma. Serum amyloid A plays a crucial role in muscle atrophy through the JAK2/STAT3-FOXO signaling pathway, and targeting RAGE or JAK2 may hold therapeutic potential in mitigating SAA-induced muscle atrophy.

Vibration acceleration enhances proliferation, migration, and maturation of C2C12 cells and promotes regeneration of muscle injury in male rats

Vibration acceleration (VA) using a whole-body vibration device is beneficial for skeletal muscles. However, its effect at the cellular level remains unclear. We aimed to investigate the effects of VA on muscles in vitro and in vivo using the C2C12 mouse myoblast cell line and cardiotoxin-induced injury in male rat soleus muscles. Cell proliferation was evaluated using the WST/CCK-8 assay and proportion of Ki-67 positive cells. Cell migration was assessed using wound-healing assay. Cell differentiation was examined by the maturation index in immunostained cultured myotubes and real-time polymerase chain reaction. Regeneration of soleus muscle in rats was assessed by recruitment of satellite cells, cross-sectional area of regenerated muscle fibers, number of centrally nucleated fibers, and conversion of regenerated muscle from fast- to slow-twitch. VA at 30 Hz with low amplitude for 10 min promoted C2C12 cell proliferation, migration, and myotube maturation, without promoting expression of genes related to differentiation. VA significantly increased Pax7-stained satellite cells and centrally nucleated fibers in injured soleus muscles on Day 7 and promoted conversion of fast- to slow-twitch muscle fibers with an increase in the mean cross-sectional area of regenerated muscle fibers on Day 14. VA enhanced the proliferation, migration, and maturation of C2C12 myoblasts and regeneration of injured rat muscles.

Advantages and Prospective Implications of Smart Materials in Tissue Engineering: Piezoelectric, Shape Memory, and Hydrogels

Conventional biomaterial is frequently used in the biomedical sector for various therapies, imaging, treatment, and theranostic functions. However, their properties are fixed to meet certain applications. Smart materials respond in a controllable and reversible way, modifying some of their properties because of external stimuli. However, protein-based smart materials allow modular protein domains with different functionalities and responsive behaviours to be easily combined. Wherein, these "smart" behaviours can be tuned by amino acid identity and sequence. This review aims to give an insight into the design of smart materials, mainly protein-based piezoelectric materials, shape-memory materials, and hydrogels, as well as highlight the current progress and challenges of protein-based smart materials in tissue engineering. These materials have demonstrated outstanding regeneration of neural, skin, cartilage, bone, and cardiac tissues with great stimuli-responsive properties, biocompatibility, biodegradability, and biofunctionality.

Stimulation strategies for electrical and magnetic modulation of cells and tissues

Electrical phenomena play an important role in numerous biological processes including cellular signaling, early embryogenesis, tissue repair and remodeling, and growth of organisms. Electrical and magnetic effects have been studied on a variety of stimulation strategies and cell types regarding cellular functions and disease treatments. In this review, we discuss recent advances in using three different stimulation strategies, namely electrical stimulation via conductive and piezoelectric materials as well as magnetic stimulation via magnetic materials, to modulate cell and tissue properties. These three strategies offer distinct stimulation routes given specific material characteristics. This review will evaluate material properties and biological response for these stimulation strategies with respect to their potential applications in neural and musculoskeletal research.

Modulation of myoblast differentiation by electroactive scaffold morphology and biochemical stimuli

The physico-chemical properties of the scaffold materials used for tissue regeneration strategies have a direct impact on cell shape, adhesion, proliferation, phenotypic and differentiation. Herewith, biophysical and biochemical cues have been widely used to design and develop biomaterial systems for specific tissue engineering strategies. In this context, the patterning of piezoelectric polymers that can provide electroactive stimuli represents a suitable strategy for skeletal muscle tissue engineering applications once it has been demonstrated that mechanoelectrical stimuli promote C2C12 myoblast differentiation. In this sense, this works reports on how C2C12 myoblast cells detect and react to physical and biochemical stimuli based on micropatterned poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) electroactive scaffolds produced by soft lithography in the form of arrays of lines and hexagons (anisotropic and isotropic morphology, respectively) combined with differentiation medium. The scaffolds were evaluated for the proliferation and differentiation of C2C12 myoblast cell line and it is demonstrated that anisotropic microstructures promote muscle differentiation which is further reinforced with the introduction of biochemical stimulus. However, when the physical stimulus is not adequate to the tissue, e.g. isotropic microstructure, the biochemical stimulus has the opposite effect, hindering the differentiation process. Therefore, the proper morphological design of the scaffold combined with biochemical stimulus allows to enhance skeletal muscle differentiation and allows the development of advanced strategies for effective muscle tissue engineering.

Electroactive Biomaterials for Facilitating Bone Defect Repair under Pathological Conditions

Bone degeneration associated with various diseases is increasing due to rapid aging, sedentary lifestyles, and unhealthy diets. Living bone tissue has bioelectric properties critical to bone remodeling, and bone degeneration under various pathological conditions results in significant changes to these bioelectric properties. There is growing interest in utilizing biomimetic electroactive biomaterials that recapitulate the natural electrophysiological microenvironment of healthy bone tissue to promote bone repair. This review first summarizes the etiology of degenerative bone conditions associated with various diseases such as type II diabetes, osteoporosis, periodontitis, osteoarthritis, rheumatoid arthritis, osteomyelitis, and metastatic osteolysis. Next, the diverse array of natural and synthetic electroactive biomaterials with therapeutic potential are discussed. Putative mechanistic pathways by which electroactive biomaterials can mitigate bone degeneration are critically examined, including the enhancement of osteogenesis and angiogenesis, suppression of inflammation and osteoclastogenesis, as well as their anti-bacterial effects. Finally, the limited research on utilization of electroactive biomaterials in the treatment of bone degeneration associated with the aforementioned diseases are examined. Previous studies have mostly focused on using electroactive biomaterials to treat bone traumatic injuries. It is hoped that this review will encourage more research efforts on the use of electroactive biomaterials for treating degenerative bone conditions.

Surface charge and dynamic mechanoelectrical stimuli improves adhesion, proliferation and differentiation of neuron-like cells

Neuronal diseases and trauma are among the current major health-care problems. Patients frequently develop an irreversible state of neuronal disfunction that lacks treatment, strongly reducing life quality and expectancy. Novel strategies are thus necessary and tissue engineering research is struggling to provide alternatives to current treatments, making use of biomaterials capable to provide cell supports and active stimuli to develop permissive environments for neural regeneration. As neuronal cells are naturally found in electrical microenvironments, the electrically active materials can pave the way for new and effective neuroregenerative therapies. In this work the influence of piezoelectric poly(vinylidene fluoride) with different surface charges and dynamic mechanoelectrical stimuli on neuron-like cells adhesion, proliferation and differentiation was addressed. It is successfully demonstrated that both surface charge and electrically active dynamic microenvironments can be suitable to improve neuron-like cells adhesion, proliferation, and differentiation. These findings provide new knowledge to develop effective approaches for preclinical applications.

Piezoelectric and Magnetically Responsive Biodegradable Composites with Tailored Porous Morphology for Biotechnological Applications

The biomedical area in the scope of tissue regeneration pursues the development of advanced materials that can target biomimetic approaches and, ideally, have an active role in the environment they are placed in. This active role can be related to or driven by morphological, mechanical, electrical, or magnetic stimuli, among others. This work reports on the development of active biomaterials based on poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid), PHBV, a piezoelectric and biodegradable polymer, for tissue regeneration application by tailoring its morphology and functional response. PHBV films with different porosities were obtained using the solvent casting method, resorting to high-boiling-point solvents, as N,N-dimethylformamide (DMF) and dimethylsulfoxide (DMSO), and the combination of chloroform (CF) and DMF for polymer dissolution. Furthermore, magnetoelectric biomaterials were obtained through the combination of the piezoelectric PHBV with magnetostrictive iron oxide (Fe₃O₄) nanoparticles. Independently of the morphology or filler content, all biomaterials proved to be suitable for biomedical applications.

Effect of Piezoelectric BaTiO3 Filler on Mechanical and Magnetoelectric Properties of Zn0.25Co0.75Fe2O4/PVDF-TrFE Composites

Polymer-based multiferroics, combining magnetic and piezoelectric properties, are studied experimentally-from synthesis to multi-parameter characterization-in view of their prospects for fabricating biocompatible scaffolds. The main advantage of these systems is facile generation of mechanical deformations and electric signals in response to external magnetic fields. Herein, we address the composites based on PVDF-TrFE polymer matrices filled with a combination of piezoelectric (BaTiO_3, BTO) and/or ferrimagnetic (Zn_0.25Co_0.75Fe₂O₄, ZCFO) particles. It is shown that the presence of BTO micron-size particles favors stripe-type structuring of the ZCFO filler and enhances the magnetoelectric response of the sample up to 18.6 mV/(cm∙Oe). Besides that, the admixing of BTO particles is crucial because the mechanical properties of the composite filled with only ZCFO is much less efficient in transforming magnetic excitations into the mechanical and electric responses. Attention is focused on the local surfacial mechanical properties since those, to a great extent, determine the fate of stem cells cultivated on these surfaces. The nano-indentation tests are accomplished with the aid of scanning probe microscopy technique. With their proven suitable mechanical properties, a high level of magnetoelectric conversion and also biocompatibility, the composites of the considered type are enticing as the materials for multiferroic-based polymer scaffolds.

Development and evaluation of different electroactive poly(vinylidene fluoride) architectures for endothelial cell culture

Tissue engineering (TE) aims to develop structures that improve or even replace the biological functions of tissues and organs. Mechanical properties, physical-chemical characteristics, biocompatibility, and biological performance of the materials are essential factors for their applicability in TE. Poly(vinylidene fluoride) (PVDF) is a thermoplastic polymer that exhibits good mechanical properties, high biocompatibility and excellent thermal properties. However, PVDF structuring, and the corresponding processing methods used for its preparation are known to significantly influence these characteristics.

In this study, doctor blade, salt-leaching, and electrospinning processing methods were used to produce PVDF-based structures in the form of films, porous membranes, and fiber scaffolds, respectively. These PVDF scaffolds were subjected to a variety of characterizations and analyses, including physicochemical analysis, contact angle measurement, cytotoxicity assessment and cell proliferation.

All prepared PVDF scaffolds are characterized by a mechanical response typical of ductile materials. PVDF films displayed mostly vibration modes for the a-phase, while the remaining PVDF samples were characterized by a higher content of electroactive β-phase due the low temperature solvent evaporation during processing. No significant variations have been observed between the different PVDF membranes with respect to the melting transition. In addition, all analysed PVDF samples present a hydrophobic behavior. On the other hand, cytotoxicity assays confirm that cell viability is maintained independently of the architecture and processing method. Finally, all the PVDF samples promote human umbilical vein endothelial cells (HUVECs) proliferation, being higher on the PVDF film and electrospun randomly-oriented membranes. These findings demonstrated the importance of PVDF topography on HUVEC behavior, which can be used for the design of vascular implants.

Electrospun Magnetic Ionic Liquid Based Electroactive Materials for Tissue Engineering Applications

Functional electrospun fibers incorporating ionic liquids (ILs) present a novel approach in the development of active microenviroments due to their ability to respond to external magnetic fields without the addition of magnetic particles. In this context, this work reports on the development of magnetically responsive magneto-ionic fibers based on the electroactive polymer poly(vinylidene fluoride) and the magnetic IL (MIL), bis(1-butyl-3-methylimidazolium) tetrathiocyanatocobaltate ([Bmim]₂[(SCN)₄Co]). The PVDF/MIL electrospun fibers were prepared incorporating 5, 10 and 15 wt.% of the MIL, showing that the inclusion of the MIL increases the polar β-phase content of the polymer from 79% to 94% and decreases the crystallinity of the fibers from 47% to 36%. Furthermore, the thermal stability of the fibers decreases with the incorporation of the MIL. The magnetization of the PVDF/MIL composite fibers is proportional to the MIL content and decreases with temperature. Finally, cytotoxicity assays show a decrease in cell viability with increasing the MIL content.

Bioelectricity-coupling patches for repairing impaired myocardium

Cardiac abnormalities, which account for extensive burdens on public health and economy, drive necessary attempts to revolutionize the traditional therapeutic system. Advances in cardiac tissue engineering have expanded a highly efficacious platform to address cardiovascular events, especially cardiac infarction. Current efforts to overcome biocompatible limitations highlight the constructs of a conductive cardiac patch to accelerate the industrial and clinical landscape that is amenable for patient-accurate therapy, regenerative medicine, disease modeling, and drug delivery. With the notion that cardiac tissue synchronically contracts triggered by electrical pulses, the cardiac patches based on conductive materials are developed and treated on the dysfunctional heart. In this review, we systematically summarize distinct conductive materials serving as the most promising alternatives (conductive nanomaterials, conductive polymers, piezoelectric polymers, and ionic electrolytes) to achieve electric signal transmission and engineered cardiac tissues. Existing applications are discussed considering how these patches containing conductive candidates are fabricated into diverse forms with major strategies. Ultimately, we try to define a new concept as a bioelectricity-coupling patch that provides a favorable cardiac micro-environment for cardiac functional activities. Underlying challenges and prospects are presented regarding industrial processing and cardiovascular treatment of conductive patch progress. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Cardiovascular Disease.

Understanding Myoblast Differentiation Pathways When Cultured on Electroactive Scaffolds through Proteomic Analysis

Electroactive materials allow the modulation of cell-materials interactions and cell fate, leading to advanced tissue regeneration strategies. Nevertheless, their effect at the cellular level is still poorly understood. In this context, the proteome analysis of C2C12 cell differentiation cultured on piezoelectric polymer films with null average surface charge (non-poled), net positive surface charge (poled +), and net negative surface charge (poled -) has been addressed. Protein/pathway alterations for skeletal muscle development were identified comparing proteomic profiles of C2C12 cells differentiated on poly(vinylidene fluoride), with similar cells differentiated on a polystyrene plate (control), using label-free liquid chromatography-tandem mass spectrometry (LC-MS/MS). Only significantly expressed proteins (P < 0.01, analysis of variance) were used for bioinformatic analyses. A total of 37 significantly expressed proteins were detected on the C2C12 proteome with PVDF "poled -" at 24 h, whereas on the PVDF "poled +", a total of 105 significantly expressed proteins were considered. At 5 days of differentiation, the number of significantly expressed proteins decreased to 23 and 31 in cells grown on negative and positive surface charge, respectively, the influence of surface charge being more explicit in some proteins. In both cases, proteins such as Fbn1, Hspg2, Rcn3, Tgm2, Mylpf, Anxa2, and Anxa6, involved in calcium-related signaling, were highly expressed during myoblast differentiation. Furthermore, some proteins involved in muscle contraction (Acta2, Anxa2, and Anxa6) were detected in the PVDF "poled +" sample. Upregulation of several proteins that enhance skeletal muscle development was detected in the PVDF "poled -" sample, including Ckm (422%), Tmem14c (384%), Serpinb6a (460%), adh7 (199%), and Car3 (171%), while for the "poled +" samples, these proteins were also upregulated at a smaller magnitude (254, 317, 253, 123, and 72%, respectively). Other differentially expressed proteins such as Mylpf (189%), Mybph (168%), and Mbnl1 (168%) were upregulated only in PVDF "poled -" samples, while Hba-a1 levels (581%) were increased in the PVDF "poled +" sample. On the other hand, cells cultured on non-poled samples have no differences with respect to the ones cultured on the control, in contrary to the poled films, with overall surface charge, demonstrating the relevance of scaffold surface charge on cell behavior. This study demonstrates that both positive and negative overall surface charges promote the differentiation of C2C12 cells through involvement of proteins related with the contraction of the skeletal muscle cells, with a more pronounced effect with the negative charged surfaces.

Electroactive functional microenvironments from bioactive polymers: A new strategy to address cancer

The present work reports on a new approach based on electroactive microenvironments to mitigate skeletal muscle cancer. For that, piezoelectric films based on poly(vinylidene fluoride) have been applied to evaluate the influence of mechano- and/or electrical stimuli on rhabdomyosarcoma (RMS) proliferation. Human embryonal rhabdomyosarcoma (RD) cells were cultured on PVDF pristine films with different surface charge (non-poled, poled+ and poled-) and magnetic composites (10% and 20% Fe₃O₄, and 20% CFO filler content) to allow magneto-mechanical and magnetoelectrical stimulation films. Electrospun PVDF pristine (oriented and randomly) and magnetic (10% Fe₃O₄) fiber mats were also evaluated to take into consideration the morphology effect on cell response. It was found that the mechanical stimuli enhance RMS proliferation whereas the mechano-electrical decreases it. It was also verified that the RD cells proliferate better on randomly oriented fibers, whereas myoblast cells do it better in oriented ones. The obtained results confirm that electroactive microenvironments can be used to develop novel and effective approaches to deal with RMS cancer, that can be extrapolated to others cancer types.

In-vitro effectiveness of poly-β-alanine reinforced poly(3-hydroxybutyrate) fibrous scaffolds for skeletal muscle regeneration

In skeletal muscle tissue engineering, success has not been achieved yet, since the properties of the tissue cannot be fully mimicked. The aim of this study is to investigate the potential use of poly-3-hydroxybutyrate (P3HB)/poly-β-alanine (PBA) fibrous tissue scaffolds with piezoelectric properties for skeletal muscle regeneration. Random and aligned P3HB/PBA (5:1) fibrous matrices were prepared by electrospinning with average diameters of 951 ± 153 nm and 891 ± 247 nm, respectively. X-ray diffraction (XRD) analysis showed that PBA reinforcement and aligned orientation of fibers reduced the crystallinity and brittleness of P3HB matrix. While tensile strength and elastic modulus of random fibrous matrices were determined as 3.9 ± 1.0 MPa and 86.2 ± 10.6 MPa, respectively, in the case of aligned fibers they increased to 8.5 ± 1.8 MPa and 378.2 ± 4.2 MPa, respectively. Aligned matrices exhibited a soft and an elastic behaviour with ~70% elongation in similar to the natural tissue. For the first time, d₃₃ piezoelectric modulus of P3HB/PBA matrices were measured as 5 pC/N and 5.3 pC/N, for random and aligned matrices, respectively. Cell culture studies were performed with C2C12 myoblastic cell line. Both of random and aligned P3HB/PBA fibrous matrices supported attachment and proliferation of myoblasts, but cells cultured on aligned fibers formed regular and thick myofibril structures similar to the native muscle tissue. Reverse transcription polymerase chain reaction (RT-qPCR) analysis indicated that MyoD gene was expressed in the cells cultured on both fiber orientation, however, on the aligned fibers significant increase was determined in Myogenin and Myosin Heavy Chain (MHC) gene expressions, which indicate functional tubular structures. The results of RT-qPCR analysis were also supported with immunohistochemistry for myogenic markers. These in vitro studies have shown that piezoelectric P3HB/PBA aligned fibrous scaffolds can successfully mimic skeletal muscle tissue with its superior chemical, morphological, mechanical, and electroactive properties.

A Self-Powered Piezo-Bioelectric Device Regulates Tendon Repair-Associated Signaling Pathways through Modulation of Mechanosensitive Ion Channels

Tendon disease constitutes an unmet clinical need and remains a critical challenge in the field of orthopaedic surgery. Innovative solutions are required to overcome the limitations of current tendon grafting approaches, and bioelectronic therapies show promise in treating musculoskeletal diseases, accelerating functional recovery through the activation of tissue regeneration-specific signaling pathways. Self-powered bioelectronic devices, particularly piezoelectric materials, represent a paradigm shift in biomedicine, negating the need for battery or external powering and complementing existing mechanotherapy to accelerate the repair processes. Here, the dynamic response of tendon cells to a piezoelectric collagen-analogue scaffold comprised of aligned nanoscale fibers made of the ferroelectric material poly(vinylidene fluoride-co-trifluoroethylene) is shown. It is demonstrated that motion-powered electromechanical stimulation of tendon tissue through piezo-bioelectric device results in ion channel modulation in vitro and regulates specific tissue regeneration signaling pathways. Finally, the potential of the piezo-bioelectronic device in modulating the progression of tendinopathy-associated processes in vivo, using a rat Achilles acute injury model is shown. This study indicates that electromechanical stimulation regulates mechanosensitive ion channel sensitivity and promotes tendon-specific over non-tenogenic tissue repair processes.

Electroactive Biomaterials and Systems for Cell Fate Determination and Tissue Regeneration: Design and Applications

During natural tissue regeneration, tissue microenvironment and stem cell niche including cell-cell interaction, soluble factors, and extracellular matrix (ECM) provide a train of biochemical and biophysical cues for modulation of cell behaviors and tissue functions. Design of functional biomaterials to mimic the tissue/cell microenvironment have great potentials for tissue regeneration applications. Recently, electroactive biomaterials have drawn increasing attentions not only as scaffolds for cell adhesion and structural support, but also as modulators to regulate cell/tissue behaviors and function, especially for electrically excitable cells and tissues. More importantly, electrostimulation can further modulate a myriad of biological processes, from cell cycle, migration, proliferation and differentiation to neural conduction, muscle contraction, embryogenesis, and tissue regeneration. In this review, endogenous bioelectricity and piezoelectricity are introduced. Then, design rationale of electroactive biomaterials is discussed for imitating dynamic cell microenvironment, as well as their mediated electrostimulation and the applying pathways. Recent advances in electroactive biomaterials are systematically overviewed for modulation of stem cell fate and tissue regeneration, mainly including nerve regeneration, bone tissue engineering, and cardiac tissue engineering. Finally, the significance for simulating the native tissue microenvironment is emphasized and the open challenges and future perspectives of electroactive biomaterials are concluded.

Boosting Magnetoelectric Effect in Polymer-Based Nanocomposites

Polymer-based magnetoelectric composite materials have attracted a lot of attention due to their high potential in various types of applications as magnetic field sensors, energy harvesting, and biomedical devices. Current researches are focused on the increase in the efficiency of magnetoelectric transformation. In this work, a new strategy of arrangement of clusters of magnetic nanoparticles by an external magnetic field in PVDF and PFVD-TrFE matrixes is proposed to increase the voltage coefficient (αME) of the magnetoelectric effect. Another strategy is the use of 3-component composites through the inclusion of piezoelectric BaTiO3 particles. Developed strategies allow us to increase the αME value from ~5 mV/cm·Oe for the composite of randomly distributed CoFe2O4 nanoparticles in PVDF matrix to ~18.5 mV/cm·Oe for a composite of magnetic particles in PVDF-TrFE matrix with 5%wt of piezoelectric particles. The applicability of such materials as bioactive surface is demonstrated on neural crest stem cell cultures.

Integrating biomaterials and food biopolymers for cultured meat production

Cultured meat has recently achieved mainstream prominence due to the emergence of societal and industrial interest. In contrast to animal-based production of traditional meat, the cultured meat approach entails laboratory cultivation of engineered muscle tissue. However, bioengineers have hitherto engineered tissues to fulfil biomedical endpoints, and have had limited experience in engineering muscle tissue for its post-mortem traits, which broadly govern consumer definitions of meat quality. Furthermore, existing tissue engineering approaches face fundamental challenges in technical feasibility and industrial scalability for cultured meat production. This review discusses how animal-based meat production variables influence meat properties at both the molecular and functional level, and whether current cultured meat approaches recapitulate these properties. In addition, this review considers how conventional meat producers employ exogenous biopolymer-based meat ingredients and processing techniques to mimic desirable meat properties in meat products. Finally, current biomaterial strategies for engineering muscle and adipose tissue are surveyed in the context of emerging constraints that pertain to cultured meat production, such as edibility, sustainability and scalability, and potential areas for integrating biomaterials and food biopolymer approaches to address these constraints are discussed. STATEMENT OF SIGNIFICANCE: Laboratory-grown or cultured meat has gained increasing interest from industry and the public, but currently faces significant impediment to market feasibility. This is due to fundamental knowledge gaps in producing realistic meat tissues via conventional tissue engineering approaches, as well as translational challenges in scaling up these approaches in an efficient, sustainable and high-volume manner. By defining the molecular basis for desirable meat quality attributes, such as taste and texture, and introducing the fundamental roles of food biopolymers in mimicking these properties in conventional meat products, this review aims to bridge the historically disparate fields of meat science and biomaterials engineering in order to inspire potentially synergistic strategies that address some of these challenges.

Biomaterial-directed cell behavior for tissue engineering

Successful tissue regeneration strategies focus on the use of novel biomaterials, structures, and a variety of cues to control cell behavior and promote regeneration. Studies discovered how biomaterial/ structure cues in the form of biomaterial chemistry, material stiffness, surface topography, pore, and degradation properties play an important role in controlling cellular events in the contest of in vitro and in vivo tissue regeneration. Advanced biomaterials structures and strategies are developed to focus on the delivery of bioactive factors, such as proteins, peptides, and even small molecules to influence cell behavior and regeneration. The present article is an effort to summarize important findings and further discuss biomaterial strategies to influence and control cell behavior directly via physical and chemical cues. This article also touches on various modern methods in biomaterials processing to include bioactive factors as signaling cues to program cell behavior for tissue engineering and regenerative medicine.

Regenerative medicine for skeletal muscle loss: a review of current tissue engineering approaches

Skeletal muscle is capable of regeneration following minor damage, more significant volumetric muscle loss (VML) however results in permanent functional impairment. Current multimodal treatment methodologies yield variable functional recovery, with reconstructive surgical approaches restricted by limited donor tissue and significant donor morbidity. Tissue-engineered skeletal muscle constructs promise the potential to revolutionise the treatment of VML through the regeneration of functional skeletal muscle. Herein, we review the current status of tissue engineering approaches to VML; firstly the design of biocompatible tissue scaffolds, including recent developments with electroconductive materials. Secondly, we review the progenitor cell populations used to seed scaffolds and their relative merits. Thirdly we review in vitro methods of scaffold functional maturation including the use of three-dimensional bioprinting and bioreactors. Finally, we discuss the technical, regulatory and ethical barriers to clinical translation of this technology. Despite significant advances in areas, such as electroactive scaffolds and three-dimensional bioprinting, along with several promising in vivo studies, there remain multiple technical hurdles before translation into clinically impactful therapies can be achieved. Novel strategies for graft vascularisation, and in vitro functional maturation will be of particular importance in order to develop tissue-engineered constructs capable of significant clinical impact.

Bioengineered in vitro skeletal muscles as new tools for muscular dystrophies preclinical studies

Muscular dystrophies are a group of highly disabling disorders that share degenerative muscle weakness and wasting as common symptoms. To date, there is not an effective cure for these diseases. In the last years, bioengineered tissues have emerged as powerful tools for preclinical studies. In this review, we summarize the recent technological advances in skeletal muscle tissue engineering. We identify several ground-breaking techniques to fabricate in vitro bioartificial muscles. Accumulating evidence shows that scaffold-based tissue engineering provides topographical cues that enhance the viability and maturation of skeletal muscle. Functional bioartificial muscles have been developed using human myoblasts. These tissues accurately responded to electrical and biological stimulation. Moreover, advanced drug screening tools can be fabricated integrating these tissues in electrical stimulation platforms. However, more work introducing patient-derived cells and integrating these tissues in microdevices is needed to promote the clinical translation of bioengineered skeletal muscle as preclinical tools for muscular dystrophies.

Biodegradable Hydrogels Loaded with Magnetically Responsive Microspheres as 2D and 3D Scaffolds

Scaffolds play an essential role in the success of tissue engineering approaches. Their intrinsic properties are known to influence cellular processes such as adhesion, proliferation and differentiation. Hydrogel-based matrices are attractive scaffolds due to their high-water content resembling the native extracellular matrix. In addition, polymer-based magnetoelectric materials have demonstrated suitable bioactivity, allowing to provide magnetically and mechanically activated biophysical electrical stimuli capable of improving cellular processes. The present work reports on a responsive scaffold based on poly (L-lactic acid) (PLLA) microspheres and magnetic microsphere nanocomposites composed of PLLA and magnetostrictive cobalt ferrites (CoFe2O4), combined with a hydrogel matrix, which mimics the tissue's hydrated environment and acts as a support matrix. For cell proliferation evaluation, two different cell culture conditions (2D and 3D matrices) and two different strategies, static and dynamic culture, were applied in order to evaluate the influence of extracellular matrix-like confinement and the magnetoelectric/magneto-mechanical effect on cellular behavior. MC3T3-E1 proliferation rate is increased under dynamic conditions, indicating the potential use of hydrogel matrices with remotely stimulated magnetostrictive biomaterials for bone tissue engineering.

Patterned Piezoelectric Scaffolds for Osteogenic Differentiation

The morphological clues of scaffolds can determine cell behavior and, therefore, the patterning of electroactive polymers can be a suitable strategy for bone tissue engineering. In this way, this work reports on the influence of poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) electroactive micropatterned scaffolds on the proliferation and differentiation of bone cells. For that, micropatterned P(VDF-TrFE) scaffolds were produced by lithography in the form of arrays of lines and hexagons and then tested for cell proliferation and differentiation of pre-osteoblast cell line. Results show that more anisotropic surface microstructures promote bone differentiation without the need of further biochemical stimulation. Thus, the combination of specific patterns with the inherent electroactivity of materials provides a promising platform for bone regeneration.

Morphology Dependence Degradation of Electro- and Magnetoactive Poly(3-hydroxybutyrate-co-hydroxyvalerate) for Tissue Engineering Applications

Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) is a piezoelectric biodegradable and biocompatible polymer suitable for tissue engineering applications. The incorporation of magnetostrictive cobalt ferrites (CFO) into PHBV matrix enables the production of magnetically responsive composites, which proved to be effective in the differentiation of a variety of cells and tissues. In this work, PHBV and PHBV with CFO nanoparticles were produced in the form of films, fibers and porous scaffolds and subjected to an experimental program allowing to evaluate the degradation process under biological conditions for a period up to 8 weeks. The morphology, physical, chemical and thermal properties were evaluated, together with the weight loss of the samples during the in vitro degradation assays. No major changes in the mentioned properties were found, thus proving its applicability for tissue engineering applications. Degradation was apparent from week 4 and onwards, leading to the conclusion that the degradation ratio of the material is suitable for a large range of tissue engineering applications. Further, it was found that the degradation of the samples maintain the biocompatibility of the materials for the pristine polymer, but can lead to cytotoxic effects when the magnetic CFO nanoparticles are exposed, being therefore needed, for magnetoactive applications, to substitute them by biocompatible ferrites, such as an iron oxide (Fe3O4).

Surface Charge-Mediated Cell-Surface Interaction on Piezoelectric Materials

Cell-material interactions play an essential role in the development of scaffold-based tissue engineering strategies. Cell therapies are still limited in treating injuries when severe damage causes irreversible loss of muscle cells. Electroactive biomaterials and, in particular, piezoelectric materials offer new opportunities for skeletal muscle tissue engineering since these materials have demonstrated suitable electroactive microenvironments for tissue development. In this study, the influence of the surface charge of piezoelectric poly(vinylidene fluoride) (PVDF) on cell adhesion was investigated. The cytoskeletal organization of C2C12 myoblast cells grown on different PVDF samples was studied by immunofluorescence staining, and the interactions between single live cells and PVDF were analyzed using an atomic force microscopy (AFM) technique termed single-cell force spectroscopy. It was demonstrated that C2C12 myoblast cells seeded on samples with net surface charge present a more elongated morphology, this effect being dependent on the surface charge but independent of the poling direction (negative or positive surface charge). It was further shown that the cell deadhesion forces of individual C2C12 cells were higher on PVDF samples with an overall negative surface charge (8.92 ± 0.45 nN) compared to those on nonpoled substrates (zero overall surface charge) (4.06 ± 0.20 nN). These findings explicitly demonstrate that the polarization/surface charge is an important parameter to determine cell fate as it affects C2C12 cell adhesion, which in turn will influence cell behavior, namely, cell proliferation and differentiation.

Biomechanical studies on biomaterial degradation and co-cultured cells: mechanisms, potential applications, challenges and prospects

Biomechanics contains a wide variety of research fields related to biology and mechanics. Actually, to better study or develop a tissue-engineered system, it is now widely recognized that there is no complete nor meaningful study without considering biomechanical factors and the cell response or adaptation to biomechanics. In that respect, this review will focus on not only the influence of biomechanics in biomaterial degradation and co-cultured cells, based on current major frontier research findings, but also the challenges and prospects in biomechanical research. Particularly, through the elaboration of certain typical forces affecting biomaterial degradation and celluar functions, this paper tries to reveal the possible mechanisms, and thus provide ideas on how to design or optimize co-culture systems and apply external forces for proper cell and tissue engineering. Furthermore, while emphasizing the importance of the mechanical control of the cell phenotype and fate, it is expected that these achievements can pave the way to materials-based therapies for different pathological conditions, including diagnosis and treatment of cancer.

Tailoring Bacteria Response by Piezoelectric Stimulation

Bacteria are simple organisms with a remarkable capacity for survival by adapting to different environments, which is a result of their long evolutionary history. Taking into consideration these adapting mechanisms, this work now investigates the effect of electrically active microenvironments on bacteria and on how this stimulation may trigger bacteria growth inhibition or proliferation. Electrical microenvironments are generated via stimulation of a piezoelectric polymer with a mechanical cue, thus developing an electrical response and a variation on the surface charge of the polymeric material. Specifically, Gram-positive Staphylococcus epidermidis and Gram-negative Escherichia coli were grown overnight under static and dynamic conditions on piezoelectric poly(vinylidene) fluoride (PVDF) films to further study bacteria behavior under: (i) the effect of the material surface charge in static conditions, (ii) the mechanical effect, and (iii) the piezoelectric effect, the last two performed under dynamic conditions. Bacteria viability in planktonic and biofilm forms was measured, and the microorganism morphology was characterized. Whereas E. coli responds little to any of the stimuli application, S. epidermidis growth can be regulated through the material surface charge and by the applied frequency. Positively charged PVDF induces bacterial growth inhibition in planktonic and adhered cells in static conditions, whereas antifouling properties are obtained when a mechanical or piezoelectric effect at 4 Hz stimuli is applied. By increasing the stimuli to 40 Hz, however, the adhesion of bacteria is promoted. In conclusion, the behavior of certain bacteria species is tailored through the application of piezoelectric materials, which provide sufficient mechanoelectrical stimuli for growth or inhibition of bacteria, allowing for the design of suitable anti- and promicrobial strategies. Such strategies are only found in studies related to mammalian cells, whereas in bacterial cells this type of stimuli are still unknown. Thus, this work provides one of the first insights on the effect of piezoelectric stimuli on bacterial cells.

Boron Nitride Nanotube Addition Enhances the Crystallinity and Cytocompatibility of PVDF-TrFE

Analysis of the cellular response to piezoelectric materials has been driven by the discovery that many tissue components exhibit piezoelectric behavior ex vivo. In particular, polyvinylidene fluoride and the trifluoroethylene co-polymer (PVDF-TrFE) have been identified as promising piezo and ferroelectric materials with applications in energy harvesting and biosensor devices. Critically, the modulation of the structural and crystalline properties of PVDF-TrFE through annealing processes and the addition of particulate or fibrous fillers has been shown to modulate significantly the materials electromechanical properties. In this study, a PVDF-TrFE/boron-nitride nanotube composite was evaluated by modulated differential scanning calorimetry to assess the effects of boron nitride nanotube addition and thermal annealing on the composite structure and crystal behavior. An increased beta crystal formation [f(β) = 0.71] was observed following PVDF-TrFE annealing at the first crystallization temperature of 120°C. In addition, the inclusion of boron nitride nanotubes significantly increased the crystal formation behavior [f(β) = 0.76] and the mechanical properties of the material. Finally, it was observed that BNNT incorporation enhance the adherence and proliferation of human tenocyte cells in vitro.

Tissue Engineering: Understanding the Role of Biomaterials and Biophysical Forces on Cell Functionality Through Computational and Structural Biotechnology Analytical Methods

Within the past 25 years, tissue engineering (TE) has grown enormously as a science and as an industry. Although classically concerned with the recapitulation of tissue and organ formation in our body for regenerative medicine, the evolution of TE research is intertwined with progress in other fields through the examination of cell function and behaviour in isolated biomimetic microenvironments. As such, TE applications now extend beyond the field of tissue regeneration research, operating as a platform for modifiable, physiologically-representative in vitro models with the potential to improve the translation of novel therapeutics into the clinic through a more informed understanding of the relevant molecular biology, structural biology, anatomy, and physiology. By virtue of their biomimicry, TE constructs incorporate features of extracellular macrostructure, molecular adhesive moieties, and biomechanical properties, converging with computational and structural biotechnology advances. Accordingly, this mini-review serves to contextualise TE for the computational and structural biotechnology reader and provides an outlook on how the disciplines overlap with respect to relevant advanced analytical applications.