Multi-layered polydopamine coatings for the immobilization of growth factors onto highly-interconnected and bimodal PCL/HA-based scaffolds

Label-free electrochemical biosensor based on AuNPs and PCL-b-PHEAA amphiphilic copolymer for highly sensitive detection of CEA

Carcinoembryonic antigen (CEA) is a broad-spectrum tumor marker expressed in various human cancers. In this study, the electrode loaded with AuNPs was used to replace the traditional electrode, providing more active sites for biological probes and significantly enhancing the sensitivity of the sensor. By constructing an aptamer-antigen-aptamer "sandwich structure," highly selective detection was achieved, effectively avoiding cross-reactions. In addition, the polymer PCL-b-PHEAA was introduced for signal amplification, further improving the detection performance. The label-free method directly utilizes the biological recognition system to obtain more accurate information and is more convenient to operate. Under the optimal conditions, the linear range of CEA detection by electrochemical impedance method was 100 fg mL-1 - 200 ng mL-1, and the limit of detection was 60 fg mL-1. Moreover, this approach demonstrates remarkable sensitivity and exceptional anti-interference capabilities when applied to the analysis of clinical samples. As such, it presents a far more efficient and precise detection solution for the biosensing domain.

Research Progress in 3D Printed Biobased and Biodegradable Polyester/Ceramic Composite Materials: Applications and Challenges in Bone Tissue Engineering

Transplantation of bone implants is currently recognized as one of the most effective means of treating bone defects. Biobased and biodegradable polyester composites combine the good mechanical and degradable properties of polyester, thereby providing an alternative for bone implant materials. Bone tissue engineering (BTE) accelerates bone defect repair by simulating the bone microenvironment. Composite scaffolds support bone formation and further accelerate the process of bone repair. The introduction of 3D printing technology enables the preparation of scaffolds to be more precise, reproducible, and flexible, which is a very promising development. This review presents the physical properties of BTE scaffolds and summarizes the strategies adopted by domestic and international scholars to improve the properties of scaffolds based on biobased and biodegradable polyester/ceramic composites in recent years. In addition, future development prospects in the field and the challenges of expanding production in clinical applications are presented.

Bioactive peptides and proteins for tissue repair: microenvironment modulation, rational delivery, and clinical potential

Bioactive peptides and proteins (BAPPs) are promising therapeutic agents for tissue repair with considerable advantages, including multifunctionality, specificity, biocompatibility, and biodegradability. However, the high complexity of tissue microenvironments and their inherent deficiencies such as short half-live and susceptibility to enzymatic degradation, adversely affect their therapeutic efficacy and clinical applications. Investigating the fundamental mechanisms by which BAPPs modulate the microenvironment and developing rational delivery strategies are essential for optimizing their administration in distinct tissue repairs and facilitating clinical translation. This review initially focuses on the mechanisms through which BAPPs influence the microenvironment for tissue repair via reactive oxygen species, blood and lymphatic vessels, immune cells, and repair cells. Then, a variety of delivery platforms, including scaffolds and hydrogels, electrospun fibers, surface coatings, assisted particles, nanotubes, two-dimensional nanomaterials, and nanoparticles engineered cells, are summarized to incorporate BAPPs for effective tissue repair, modification strategies aimed at enhancing loading efficiencies and release kinetics are also reviewed. Additionally, the delivery of BAPPs can be precisely regulated by endogenous stimuli (glucose, reactive oxygen species, enzymes, pH) or exogenous stimuli (ultrasound, heat, light, magnetic field, and electric field) to achieve on-demand release tailored for specific tissue repair needs. Furthermore, this review focuses on the clinical potential of BAPPs in facilitating tissue repair across various types, including bone, cartilage, intervertebral discs, muscle, tendons, periodontal tissues, skin, myocardium, nervous system (encompassing brain, spinal cord, and peripheral nerve), endometrium, as well as ear and ocular tissue. Finally, current challenges and prospects are discussed.

Polydopamine-Based Biomaterials in Orthopedic Therapeutics: Properties, Applications, and Future Perspectives

Polydopamine is a versatile and modifiable polymer, known for its excellent biocompatibility and adhesiveness. It can also be engineered into a variety of nanoparticles and biomaterials for drug delivery, functional modification, making it an excellent choice to enhance the prevention and treatment of orthopedic diseases. Currently, the application of polydopamine biomaterials in orthopedic disease prevention and treatment is in its early stages, despite some initial achievements. This article aims to review these applications to encourage further development of polydopamine for orthopedic therapeutic needs. We detail the properties of polydopamine and its biomaterial types, highlighting its superior performance in functional modification on nanoparticles and materials. Additionally, we also explore the challenges and future prospects in developing optimal polydopamine biomaterials for clinical use in orthopedic disease prevention and treatment.

Growth factor-functionalized titanium implants for enhanced bone regeneration: A review

Titanium and titanium alloys are widely favored materials for orthopedic implants due to their exceptional mechanical properties and biological inertness. The additional benefit of sustained local release of bioactive substances further promotes bone tissue formation, thereby augmenting the osseointegration capacity of titanium implants and attracting increasing attention in bone tissue engineering. Among these bioactive substances, growth factors have shown remarkable osteogenic and angiogenic induction capabilities. Consequently, researchers have developed various physical, chemical, and biological loading techniques to incorporate growth factors into titanium implants, ensuring controlled release kinetics. In contrast to conventional treatment modalities, the localized release of growth factors from functionalized titanium implants not only enhances osseointegration but also reduces the risk of complications. This review provides a comprehensive examination of the types and mechanisms of growth factors, along with a detailed exploration of the methodologies used to load growth factors onto the surface of titanium implants. Moreover, it highlights recent advancements in the application of growth factors to the surface of titanium implants (Scheme 1). Finally, the review discusses current limitations and future prospects for growth factor-functionalized titanium implants. In summary, this paper presents cutting-edge design strategies aimed at enhancing the bone regenerative capacity of growth factor-functionalized titanium implants-a significant advancement in the field of enhanced bone regeneration.

Polydopamine-mediated immobilization of BMP-2 onto electrospun nanofibers enhances bone regeneration

Dealing with bone defects is a significant challenge to global health. Electrospinning in bone tissue engineering has emerged as a solution to this problem. In this study, we designed a PVDF-b-PTFE block copolymer by incorporating TFE, which induced a phase shift in PVDF fromαtoβ, thereby enhancing the piezoelectric effect. Utilizing the electrospinning process, we not only converted the material into a film with a significant surface area and high porosity but also intensified the piezoelectric effect. Then we used polydopamine to immobilize BMP-2 onto PVDF-b-PTFE electrospun nanofibrous membranes, achieving a controlled release of BMP-2. The scaffold's characters were examined using SEM and XRD. To assess its osteogenic effectsin vitro, we monitored the proliferation of MC3T3-E1 cells on the fibers, conducted ARS staining, and measured the expression of osteogenic genes.In vivo, bone regeneration effects were analyzed through micro-CT scanning and HE staining. ELISA assays confirmed that the sustained release of BMP-2 can be maintained for at least 28 d. SEM images and CCK-8 results demonstrated enhanced cell viability and improved adhesion in the experimental group. Furthermore, the experimental group exhibited more calcium nodules and higher expression levels of osteogenic genes, including COL-I, OCN, and RUNX2. HE staining and micro-CT scans revealed enhanced bone tissue regeneration in the defective area of the PDB group. Through extensive experimentation, we evaluated the scaffold's effectiveness in augmenting osteoblast proliferation and differentiation. This study emphasized the potential of piezoelectric PVDF-b-PTFE nanofibrous membranes with controlled BMP-2 release as a promising approach for bone tissue engineering, providing a viable solution for addressing bone defects.

Reasoning on Pore Terminology in 3D Bioprinting

Terminology is pivotal for facilitating clear communication and minimizing ambiguity, especially in specialized fields such as chemistry. In materials science, a subset of chemistry, the term "pore" is traditionally linked to the International Union of Pure and Applied Chemistry (IUPAC) nomenclature, which categorizes pores into "micro", "meso", and "macro" based on size. However, applying this terminology in closely-related areas, such as 3D bioprinting, often leads to confusion owing to the lack of consensus on specific definitions and classifications tailored to each field. This review article critically examines the current use of pore terminology in the context of 3D bioprinting, highlighting the need for reassessment to avoid potential misunderstandings. We propose an alternative classification that aligns more closely with the specific requirements of bioprinting, suggesting a tentative size-based division of interconnected pores into 'parvo'-(d < 25 µm), 'medio'-(25 < d < 100 µm), and 'magno'-(d > 100 µm) pores, relying on the current understanding of the pore size role in tissue formation. The introduction of field-specific terminology for pore sizes in 3D bioprinting is essential to enhance the clarity and precision of research communication. This represents a step toward a more cohesive and specialized lexicon that aligns with the unique aspects of bioprinting and tissue engineering.

Novel Strategies for Spatiotemporal and Controlled BMP-2 Delivery in Bone Tissue Engineering

Bone morphogenetic protein-2 (BMP-2) has been commercially approved by the Food and Drug Administration for use in bone defects and diseases. BMP-2 promotes osteogenic differentiation of mesenchymal stem cells. In bone tissue engineering, BMP-2 incorporated into scaffolds can be used for stimulating bone regeneration in organoid construction, drug testing platforms, and bone transplants. However, the high dosage and uncontrollable release rate of BMP-2 challenge its clinical application, mainly due to the short circulation half-life of BMP-2, microbial contamination in bone extracellular matrix hydrogel, and the delivery method. Moreover, in clinical translation, the requirement of high doses of BMP-2 for efficacy poses challenges in cost and safety. Based on these, novel strategies should ensure that BMP-2 is delivered precisely to the desired location within the body, regulating the timing of BMP-2 release to coincide with the bone healing process, as well as release BMP-2 in a controlled manner to optimize its therapeutic effect and minimize side effects. This review highlights improvements in bone tissue engineering applying spatiotemporal and controlled BMP-2 delivery, including molecular engineering, biomaterial modification, and synergistic therapy, aiming to provide references for future research and clinical trials.

Structural and functional alterations of polydopamine-coated hemoglobin: New insights for the development of successful oxygen carriers

One of the major factors that is currently hindering the development of hemoglobin (Hb)-based oxygen carriers (HBOCs) is the autoxidation of Hb into nonfunctional methemoglobin. Modification with polydopamine (PDA), which is a biocompatible free radical scavenger has shown the ability to protect Hb against oxidation. Due to its tremendous potential in the development of successful HBOCs, herein, we conduct a thorough evaluation of the effect of PDA on the stability, aggregation, structure and function of the underlying Hb. By UV-vis spectrometry we show that PDA can prevent Hb's aggregation while thermal denaturation studies indicate that, although PDA coating resulted in a lower midpoint transition temperature, it was also able to protect the protein from full denaturation. These results are further corroborated by differential scanning calorimetry. Circular dichroism reveals that PDA can promote changes in Hb's secondary structure while, by UV-vis spectroscopy, we show that PDA also interacts with the porphyrin complex located in Hb's hydrophobic pocket. Last but not least, affinity studies show that PDA-coated Hb has a higher capability for oxygen release. Such an effect is further enhanced at lower pH. Importantly, through molecular docking simulations we provide a plausible explanation for the observed experimental results.

Fabrication and Characterization of a Polydopamine-Modified Bacterial Cellulose and Sugarcane Filter Cake-Derived Hydroxyapatite Composite Scaffold

The search for environmentally friendly and sustainable sources of raw materials has been ongoing for quite a while, and currently, the utilization and applications of agro-industrial biomass residues in biomedicine are being researched. In this study, a polydopamine (PDA)-modified bacterial cellulose (BC) and hydroxyapatite (HA) composite scaffold was fabricated using the freeze-drying method. The as-prepared hydroxyapatite was synthesized via the chemical precipitation method using sugarcane filter cake as a calcium source, as reported in a previous study. X-ray diffraction analysis revealed a carbonated phase of the prepared hydroxyapatite, similar to that of the natural bone mineral. Wide-angle X-ray scattering analysis revealed the successful fabrication of BC/HA composite scaffolds, while X-ray photoelectron spectroscopy suggested that PDA was deposited on the surface of the BC/HA composite scaffolds. In vitro cell viability assays indicated that BC/HA and PDA-modified composite scaffolds did not induce cytotoxicity and were biocompatible with MC3T3-E1 preosteoblasts. PDA-modified composite scaffolds showed enhanced protein adsorption capacity in vitro compared to the unmodified scaffolds. On a concluding note, these results demonstrate that agro-industrial biomass residues have the potential to be used in biomedical applications and that PDA-modified BC/HA composite scaffolds are a promising biomaterial for bone tissue engineering.

Intelligent Vascularized 3D/4D/5D/6D-Printed Tissue Scaffolds

Blood vessels are essential for nutrient and oxygen delivery and waste removal. Scaffold-repairing materials with functional vascular networks are widely used in bone tissue engineering. Additive manufacturing is a manufacturing technology that creates three-dimensional solids by stacking substances layer by layer, mainly including but not limited to 3D printing, but also 4D printing, 5D printing and 6D printing. It can be effectively combined with vascularization to meet the needs of vascularized tissue scaffolds by precisely tuning the mechanical structure and biological properties of smart vascular scaffolds. Herein, the development of neovascularization to vascularization to bone tissue engineering is systematically discussed in terms of the importance of vascularization to the tissue. Additionally, the research progress and future prospects of vascularized 3D printed scaffold materials are highlighted and presented in four categories: functional vascularized 3D printed scaffolds, cell-based vascularized 3D printed scaffolds, vascularized 3D printed scaffolds loaded with specific carriers and bionic vascularized 3D printed scaffolds. Finally, a brief review of vascularized additive manufacturing-tissue scaffolds in related tissues such as the vascular tissue engineering, cardiovascular system, skeletal muscle, soft tissue and a discussion of the challenges and development efforts leading to significant advances in intelligent vascularized tissue regeneration is presented.

Silica Replicas Derived from Mammalian Cells as an Innovative Approach to Physically Direct Cell Lineage Decisions of Mesenchymal Stem Cells

By means of a "live-cell" template strategy, silica replicas displaying the same morphology and topography of the mammalian cells used as templates are fabricated. The replicas are used as substrates to direct the differentiation of mesenchymal stem cells (MSCs) to predefined cell lineages. Upregulation of specific genes shows how the silica replica-based substrates have the ability to induce the molecular characteristics of the mature cell types from which they have been derived from. Thus, MSCs cultured in the presence of silica replicas of human osteoblasts (HObs) differentiate into HObs-like cells, as shown by the upregulation of specific osteogenic genes. Likewise, when MSCs are incubated with silica replicas derived from human chondrocytes, an enhanced expression of chondrogenic markers is observed. Importantly, the effects of the silica replicas are cell type-specific since the incubation of MSCs with HObs silica replicas does not result in upregulation of chondrogenic markers and vice versa. What is more, for both cases, the differentiation rate is enhanced when the silica replicas are used in combination with growth factors, suggesting a potential synergistic effect. These results demonstrate the potential of this innovative method as an efficient and cheap approach with the potential to eliminate, or at least reduce, the use of biochemically soluble compounds in stem cells research.

Novel scaffold platforms for simultaneous induction osteogenesis and angiogenesis in bone tissue engineering: a cutting-edge approach

Despite the recent advances in the development of bone graft substitutes, treatment of critical size bone defects continues to be a significant challenge, especially in the elderly population. A current approach to overcome this challenge involves the creation of bone-mimicking scaffolds that can simultaneously promote osteogenesis and angiogenesis. In this context, incorporating multiple bioactive agents like growth factors, genes, and small molecules into these scaffolds has emerged as a promising strategy. To incorporate such agents, researchers have developed scaffolds incorporating nanoparticles, including nanoparticulate carriers, inorganic nanoparticles, and exosomes. Current paper provides a summary of the latest advancements in using various bioactive agents, drugs, and cells to synergistically promote osteogenesis and angiogenesis in bone-mimetic scaffolds. It also discusses scaffold design properties aimed at maximizing the synergistic effects of osteogenesis and angiogenesis, various innovative fabrication strategies, and ongoing clinical studies.

VEGF-modified PLA/HA nanocomposite fibrous membrane for cranial defect repair in rats

A major obstacle to bone tissue repair is the difficulty in establishing a rapid blood supply areas of bone defects. Vascular endothelial growth factor (VEGF)-infused tissue-engineered scaffolds offer a possible therapeutic option for these types of injuries. Their role is to accelerate angiogenesis and improve bone healing. In this study, we used electrostatic spinning and biofactor binding to construct polylactic acid (PLA)/hydroxyapatite (HA)-VEGF scaffold materials and clarify their pro-vascular role in bone defect areas for efficient bone defect repair. PLA/HA nanocomposite fibrous membranes were manufactured by selecting suitable electrostatic spinning parameters. Heparin and VEGF were bound sequentially, and then the VEGF binding and release curves of the fiber membranes were calculated. A rat cranial defect model was constructed, and PLA/HA fiber membranes bound with VEGF and unbound with VEGF were placed for treatment. Finally, we compared bone volume recovery and vascular recovery in different fibrous membrane sites. A VEGF concentration of 2.5 µg/mL achieved the maximum binding and uniform distribution of PLA/HA fibrous membranes. Extended-release experiments showed that VEGF release essentially peaked at 14 days. In vivo studies showed that PLA/HA fibrous membranes bound with VEGF significantly increased the number of vessels at the site of cranial defects, bone mineral density, bone mineral content, bone bulk density, trabecular separation, trabecular thickness, and the number of trabeculae at the site of defects in rats compared with PLA/HA fibrous membranes not bound with VEGF. VEGF-bound PLA/HA fibrous membranes demonstrate the slow release of VEGF. The VEGF binding process does not disrupt the morphology and structure of the fibrous membranes. The fibrous membranes could stimulate both osteogenesis and angiogenesis. Taken together, this research provides a new strategy for critical-sized bone defects repairing.

Immobilization of blood coagulant factor VII on polycaprolactone membrane through polydopamine grafting

Postoperative bleeding following cardiac surgeries is still an issue that deranges the medical resources and cost. The oral and injection administrations of blood coagulation protein, Factor VII (FVII), is effective to stop the bleeding. However, its short half-life has limited the effectiveness of this treatment and frequent FVII intake may distress the patients. Instead, incorporating FVII into synthetic biodegradable polymers such as polycaprolactone (PCL) that is commonly used in drug delivery applications should provide a solution. Therefore, this study aimed to immobilize FVII on PCL membranes through a cross-linkage polydopamine (PDA) grafting as an intermediate layer. These membranes are intended to provide a solution for cardiac bleeding in coagulating blood and sealing the sutured region. The membranes were evaluated in terms of its physio-chemical properties, thermal behavior, FVII release profile and biocompatibility properties. The ATR-FTIR was used to analyze the chemical functionalities of the membranes. Further validation was done with XPS where the appearances of 0.45 ± 0.06% sulfur composition and C-S peak have confirmed the immobilization of FVII on the PCL membranes. The cross-linked FVIIs were viewed in spherical immobilization on the PCL membranes with a size range between 30 and 210 nm. The surface roughness and hydrophilicity of the membranes were enhanced with a slight shift of melting temperature. The PCL-PDA-FVII0.03 and PCL-PDA-FVII0.05 membranes, with wide area of FVII immobilization released approximately only 22% of FVII into the solution within 60 days period and, it is found that the PCL-PDA-FVIIx membranes projected the Higuchi release model with non-Fickian anomalous transport. While the cytotoxic and hemocompatibility analyses showed advance cell viability, identical coagulation time and low hemolysis ratio on the PCL-PDA-FVIIx membranes. The erythrocytes were viewed in polyhedrocyte coagulated structure under SEM visualization. These results validate the biocompatibility of the membranes and its ability to prolong blood coagulation, thus highlighting its potential application as cardiac bleeding sealant.

Hemoglobin-stabilized gold nanoclusters displaying oxygen transport ability, self-antioxidation, auto-fluorescence properties and long-term storage potential

The development of hemoglobin (Hb)-based oxygen carriers (HBOCs) holds a lot of potential to overcome important drawbacks of donor blood such as a short shelf life or the potential risk of infection. However, a crucial limitation of current HBOCs is the autoxidation of Hb into methemoglobin (metHb), which lacks oxygen-carrying capacity. Herein, we address this challenge by fabricating a Hb and gold nanoclusters (AuNCs) composite (Hb@AuNCs) which preserves the exceptional features of both systems. Specifically, the Hb@AuNCs retain the oxygen-transporting properties of Hb, while the AuNCs provide antioxidant functionality as shown by their ability to catalytically deplete harmful reactive oxygen species (ROS). Importantly, these ROS-scavenging properties translate into antioxidant protection by minimizing the autoxidation of Hb into non-functional metHb. Furthermore, the AuNCs render Hb@AuNCs with auto-fluorescence properties which could potentially allow them to be monitored once administered into the body. Last but not least, these three features (i.e., oxygen transport, antioxidant and fluorescence properties) are well maintained following storage as a freeze-dried product. Thus, overall, the as-prepared Hb@AuNCs hold the potential to be used as a multifunctional blood surrogate in the near future.

Polydopamine Incorporation Enhances Cell Differentiation and Antibacterial Properties of 3D-Printed Guanosine-Borate Hydrogels for Functional Tissue Regeneration

Tissue engineering focuses on the development of materials as biosubstitutes that can be used to regenerate, repair, or replace damaged tissues. Alongside this, 3D printing has emerged as a promising technique for producing implants tailored to specific defects, which in turn increased the demand for new inks and bioinks. Especially supramolecular hydrogels based on nucleosides such as guanosine have gained increasing attention due to their biocompatibility, good mechanical characteristics, tunable and reversible properties, and intrinsic self-healing capabilities. However, most existing formulations exhibit insufficient stability, biological activity, or printability. To address these limitations, we incorporated polydopamine (PDA) into guanosine-borate (GB) hydrogels and developed a PGB hydrogel with maximal PDA incorporation and good thixotropic and printability qualities. The resulting PGB hydrogels exhibited a well-defined nanofibrillar network, and we found that PDA incorporation increased the hydrogel's osteogenic activity while having no negative effect on mammalian cell survival or migration. In contrast, antimicrobial activity was observed against the Gram-positive bacteria Staphylococcus aureus and Staphylococcus epidermidis. Thus, our findings suggest that our PGB hydrogel represents a significantly improved candidate as a 3D-printed scaffold capable of sustaining living cells, which may be further functionalized by incorporating other bioactive molecules for enhanced tissue integration.

Metal-organic framework-based oxygen carriers with antioxidant activity resulting from the incorporation of gold nanozymes

Blood transfusions are a life-saving procedure since they can preserve the body's oxygen levels in patients suffering from acute trauma, undergoing surgery, receiving chemotherapy or affected by severe blood disorders. Due to the central role of hemoglobin (Hb) in oxygen transport, so-called Hb-based oxygen carriers (HBOCs) are currently being developed for situations where donor blood is not available. In this context, an important challenge that needs to be addressed is the oxidation of Hb into methemoglobin (metHb), which is unable to bind and release oxygen. While several research groups have considered the incorporation of antioxidant enzymes to create HBOCs with minimal metHb conversion, the use of biological enzymes has important limitations related to their high cost, potential immunogenicity or low stability in vivo. Thus, nanomaterials with enzyme-like properties (i.e., nanozymes (NZs)) have emerged as a promising alternative. Amongst the different NZs, gold (Au)-based metallic nanoparticles are widely used for biomedical applications due to their biocompatibility and multi-enzyme mimicking abilities. Thus, in this work, we incorporate Au-based NZs into a type of HBOC previously reported by our group (i.e., Hb-loaded metal-organic framework (MOF)-based nanocarriers (NCs)) and investigate their antioxidant properties. Specifically, we prepare MOF-NCs loaded with Au-based NZs and demonstrate their ability to catalytically deplete over multiple rounds of two prominent reactive oxygen species (ROS) that exacerbate Hb's autoxidation (i.e., hydrogen peroxide and the superoxide radical). Importantly, following loading with Hb, we show how these ROS-scavenging properties translate into a decrease in metHb content. All in all, these results highlight the potential of NZs to create novel HBOCs with antioxidant protection which may find applications as a blood substitute in the future.

Polydopamine-Coated Alginate Microgels: Process Optimization and In Vitro Validation

In the last decade, alginate-based microgels have gained relevant interest as three-dimensional analogues of extracellular matrix, being able to support cell growth and functions. In this study, core-shell microgels were fabricated by self-polymerization of dopamine (DA) molecules under mild oxidation and in situ precipitation of polydopamine (PDA) onto alginate microbeads, processed by electro fluid dynamic atomization. Morphological (optical, SEM) and chemical analyses (ATR-FTIR, XPS) confirmed the presence of PDA macromolecules, distributed onto the microgel surface. Nanoindentation tests also indicated that the PDA coating can influence the biomechanical properties of the microgel surfaces-i.e., σmaxALG = 0.45 mN vs. σmaxALG@PDA = 0.30 mN-thus improving the interface with hMSCs as confirmed by in vitro tests; in particular, protein adsorption and viability tests show a significant increase in adhesion and cell proliferation, strictly related to the presence of PDA. Hence, we concluded that PDA coating contributes to the formation of a friendly interface able to efficiently support cells' activities. In this perspective, core-shell microgels may be suggested as a novel symmetric 3D model to study in vitro cell interactions.

Surface Modification of 3D-Printed PCL/BG Composite Scaffolds via Mussel-Inspired Polydopamine and Effective Antibacterial Coatings for Biomedical Applications

A wide variety of composite scaffolds with unique geometry, porosity and pore size can be fabricated with versatile 3D printing techniques. In this work, we fabricated 3D-printed composite scaffolds of polycaprolactone (PCL) incorporating bioactive glass (BG) particles (13-93 and 13-93B3 compositions) by using fused deposition modeling (FDM). The scaffolds were modified with a "mussel-inspired surface coating" to regulate biological properties. The chemical and surface properties of scaffolds were analyzed by Fourier transform infrared spectroscopy (FTIR), contact angle and scanning electron microscopy (SEM). Polydopamine (PDA) surface-modified composite scaffolds exhibited attractive properties. Firstly, after the surface modification, the adhesion of a composite coating based on gelatin incorporated with strontium-doped mesoporous bioactive glass (Sr-MBGNs/gelatin) was significantly improved. In addition, cell attachment and differentiation were promoted, and the antibacterial properties of the scaffolds were increased. Moreover, the bioactivity of these scaffolds was also significantly influenced: a hydroxyapatite layer formed on the scaffold surface after 3 days of immersion in SBF. Our results suggest that the promoting effect of PDA coating on PCL-BG scaffolds leads to improved scaffolds for bone tissue engineering.

Surface polydopamine modification of bone defect repair materials: Characteristics and applications

Bone defects are a common challenge for clinical orthopedic surgeons. The existing bone defect repair materials are difficult to achieve satisfactory osseointegration between the material and the bone. Therefore, it is increasingly important to find effective methods to improve the integration of the materials with the bone and thus facilitate bone defect repair. Researchers have found that polydopamine (PDA) has a structure and properties similar to the adhesive proteins secreted by mussels in nature, with good biocompatibility, bioactivity, hydrophilicity, bio-adhesion and thermal stability. PDA is therefore expected to be used as a surface modification material for bone repair materials to improve the bonding of bone repair materials to the bone surface. This paper reviews research related to PDA-modified bone repair materials and looks at their future applications.

TiO2nanotubes-MoS2/PDA-LL-37 exhibits efficient anti-bacterial activity and facilitates new bone formation under near-infrared laser irradiation

Titanium dioxide (TiO₂), as one of the titanium (Ti)-based implants, holds a promise for a variety of anti-bacterial application in medical research. In the current study, a functional molybdenum disulfide (MoS₂)/polydopamine (PDA)-LL-37 coating on titanium dioxide (TiO₂) implant was prepared. Anodic oxidation and hydrothermal treatment was given to prepare TiO₂nanotubes-MoS₂/PDA-LL-37 (T-M/P-L). Thein vitroosteogenic effect of T-M/P-L was evaluated by measuring mesenchymal stem cell (MSC) adhesion, proliferation, alkaline phosphatase (ALP) activity, extracellular matrix (ECM) mineralization, collagen secretion and osteoblast-specific messenger RNAs (mRNAs) expression. The determination on the anti-bacterial ability of T-M/P-L was followed. Furthermore, the ability of T-M/P-L to promote bone formationin vivowas evaluated. Near-infrared (NIR) laser irradiation exposure enabled the T-M/P-L coating-endowed Ti substrates to hold effective anti-bacterial ability. T-M/P-L promoted the adhesion and proliferation of MSCs. In addition, an increase was witnessed regarding the ALP activity, collagen secretion and ECM mineralization, along with the expression of runt-related transcription factor 2, ALP and osteocalcin in the presence of T-M/P-L. Additionally, T-M/P-L could stimulate endothelial cells to secrete vascular endothelial growth factor (VEGF) and promote capillary-like tubule formation. Upon NIR laser irradiation exposure, T-M/P-L not only exhibited efficientin vivoanti-bacterial activity but also facilitated new bone formation. Collectively, T-M/P-L had enhanced anti-bacterial and osteogenic activity under NIR laser irradiation.

Supercritical Foaming and Impregnation of Polycaprolactone and Polycaprolactone-Hydroxyapatite Composites with Carvacrol

Polycaprolactone (PCL) and polycaprolactone-hydroxyapatite (PCL-HA) scaffolds were produced by foaming in supercritical carbon dioxide (scCO2) at 20 MPa, as well as in one-step foaming and impregnation process using carvacrol as an antibacterial agent with proven activity against Gram-positive and Gram-negative bacteria. The experimental design was developed to study the influence of temperature (40 °C and 50 °C), HA content (10 and 20 wt.%), and depressurization rate (one and two-step decompression) on the foams’ morphology, porosity, pore size distribution, and carvacrol impregnation yield. The characterization of the foams was carried out using scanning electron microscopy (SEM, SEM-FIB), Gay-Lussac density bottle measurements, and Fourier–transform infrared (FTIR) analyses. The obtained results demonstrate that processing PCL and PCL-HA scaffolds by means of scCO2 foaming enables preparing foams with porosity in the range of 65.55–74.39% and 61.98–67.13%, at 40 °C and 50 °C, respectively. The presence of carvacrol led to a lower porosity. At 40 °C and one-step decompression at a slow rate, the porosity of impregnated scaffolds was higher than at 50 °C and two- step fast decompression. However, a narrower pore size distribution was obtained at the last processing conditions. PCL scaffolds with HA resulted in higher carvacrol impregnation yields than neat PCL foams. The highest carvacrol loading (10.57%) was observed in the scaffold with 10 wt.% HA obtained at 50 °C.

The Application of Polycaprolactone Scaffolds with Poly(ε-caprolactone)–Poly(ethylene glycol)–Poly(ε-caprolactone) Loaded on Kidney Cell Culture

Human embryonic kidney cells are the host of adenovirus type-5 (Ad5) amplification. An Ad5-vector-based COVID-19 vaccine has been proven to be tolerated and immunogenic in healthy adults. Therefore, a rationally designed scaffold for culturing human embryonic kidney cells is useful for further studying its mechanism of action. Herein, a three-dimensional layered reticulated polycaprolactone (PCL) scaffold coated with poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCEC) was developed to proliferate human embryonic kidney cells and to be used to amplify the Ad5 vector. The results indicate that PCEC improves the hydrophilicity and the cell culture ability of PCL cell culture scaffolds, resulting in a three times higher cell proliferation ratio of human embryonic kidney cells compared with those grown on bare PCL cell culture scaffolds. Meanwhile, the cytotoxicity test results showed that the scaffold material is noncytotoxic. This work provides an effective and scalable method for the in-depth study of adenoviruses.

Growth Factor Immobilization Strategies for Musculoskeletal Disorders

PURPOSE OF REVIEW

Tissue regenerative solutions for musculoskeletal disorders have become increasingly important with a growing aged population. Current growth factor treatments often require high dosages with the potential for off-target effects. Growth factor immobilization strategies offer approaches towards alleviating these concerns. This review summarizes current growth factor immobilization techniques (encapsulation, affinity interactions, and covalent binding) and the effects of immobilization on growth factor loading, release, and bioactivity.

RECENT FINDINGS

The breadth of immobilization techniques based on encapsulation, affinity, and covalent binding offer multiple methods to improve the therapeutic efficacy of growth factors by controlling bioactivity and release. Growth factor immobilization strategies have evolved to more complex systems with the capacity to load and release multiple growth factors with spatiotemporal control. The advancements in immobilization strategies allow for development of new, complex musculoskeletal tissue treatment strategies with improved spatiotemporal control of loading, release, and bioactivity.

An Attempt to Optimize Supercritical CO2 Polyaniline-Polycaprolactone Foaming Processes to Produce Tissue Engineering Scaffolds

Conjugated polymers are biomaterials with high conductivity characteristics because of their molecular composition. However, they are too rigid and brittle for medical applications and therefore need to be combined with non-conductive polymers to overcome or lessen these drawbacks. This work has, consequently, focused on the development of three-dimensional scaffolds where conductive and non-conductive polymers have been produced by combining polycaprolactone (PCL) and polyaniline (PANI) by means of supercritical CO2 foaming techniques. To evaluate their therapeutic potential as implants, a series of experiments have been designed to determine the most influential variables in the production of the three-dimensional scaffolds, including temperature, pressure, polymer ratio and depressurization rate. Internal morphology, porosity, expansion factor, PANI loads, biodegradability, mechanical and electrical properties have been taken as the response variables. The results revealed a strong influence from all the input variables studied, as well as from their interactions. The best operating conditions tested were 70 °C, 100 bar, a ratio of 5:1 (PCL:PANI), a depressurization rate of 20 bar/min and a contact time of 1 h.

Recent approaches towards bone tissue engineering

Bone tissue engineering approaches have evolved towards addressing the challenges of tissue mimetic requirements over the years. Different strategies have been combining scaffolds, cells, and biologically active cues using a wide range of fabrication techniques, envisioning the mimicry of bone tissue. On the one hand, biomimetic scaffold-based strategies have been pursuing different biomaterials to produce scaffolds, combining with diverse and innovative fabrication strategies to mimic bone tissue better, surpassing bone grafts. On the other hand, biomimetic scaffold-free approaches mainly foresee replicating endochondral ossification, replacing hyaline cartilage with new bone. Finally, since bone tissue is highly vascularized, new strategies focused on developing pre-vascularized scaffolds or pre-vascularized cellular aggregates have been a motif of study. The recent biomimetic scaffold-based and scaffold-free approaches in bone tissue engineering, focusing on materials and fabrication methods used, are overviewed herein. The biomimetic vascularized approaches are also discussed, namely the development of pre-vascularized scaffolds and pre-vascularized cellular aggregates.

Additive Manufacturing of Caffeic Acid-Inspired Mineral Trioxide Aggregate/Poly-ε-Caprolactone Scaffold for Regulating Vascular Induction and Osteogenic Regeneration of Dental Pulp Stem Cells

Mineral trioxide aggregate (MTA) is a common biomaterial used in endodontics regeneration due to its antibacterial properties, good biocompatibility and high bioactivity. Surface modification technology allows us to endow biomaterials with the necessary biological targets for activation of specific downstream functions such as promoting angiogenesis and osteogenesis. In this study, we used caffeic acid (CA)-coated MTA/polycaprolactone (PCL) composites and fabricated 3D scaffolds to evaluate the influence on the physicochemical and biological aspects of CA-coated MTA scaffolds. As seen from the results, modification of CA does not change the original structural characteristics of MTA, thus allowing us to retain the properties of MTA. CA-coated MTA scaffolds were shown to have 25% to 55% higher results than bare scaffold. In addition, CA-coated MTA scaffolds were able to significantly adsorb more vascular endothelial growth factors (p < 0.05) secreted from human dental pulp stem cells (hDPSCs). More importantly, CA-coated MTA scaffolds not only promoted the adhesion and proliferation behaviors of hDPSCs, but also enhanced angiogenesis and osteogenesis. Finally, CA-coated MTA scaffolds led to enhanced subsequent in vivo bone regeneration of the femur of rabbits, which was confirmed using micro-computed tomography and histological staining. Taken together, CA can be used as a potently functional bioactive coating for various scaffolds in bone tissue engineering and other biomedical applications in the future.

Metal-organic framework-based oxygen carriers with antioxidant protection as a result of a polydopamine coating

Rapid haemorrhage control to restore tissue oxygenation is essential in order to improve survival following traumatic injury. To this end, the current clinical standard relies on the timely administration of donor blood. However, limited availability and portability, special storage requirements, the need for blood type matching and risks of disease transmission result in severe logistical challenges, impeding the use of donor blood in pre-hospital scenarios. Therefore, great effort has been devoted to the development of haemoglobin (Hb)-based oxygen carriers (HBOCs), which could be used as a "bridge" to maintain tissue oxygenation until hospital admission. HBOCs hold the potential to diminish the deleterious effects of acute bleeding and associated mortality rates. We recently presented a novel HBOC, consisting of Hb-loaded metal organic framework (MOF)-based nanoparticles (NPs) (MOF^Hb-NPs), and demonstrated its ability to reversibly bind and release oxygen. However, a long standing challenge when developing HBOCs is that, over time, Hb oxidizes to non-functional methaemoglobin (metHb). Herein, we address this challenge by modifying the surface of the as-prepared MOF^Hb-NPs with an antioxidant polydopamine (PDA) coating. The conditions promoting the greatest PDA deposition are first optimized. Next, the ability of the resulting PDA-coated MOF^Hb-NPs to scavenge important reactive oxygen species is demonstrated both in a test tube and in the presence of two relevant cell lines (i.e., macrophages and endothelial cells). Importantly, this antioxidant protection translates into minimal metHb conversion.

Polydopamine-Coated Poly(l-lactide) Nanofibers with Controlled Release of VEGF and BMP-2 as a Regenerative Periosteum

The periosteum plays an important role in vascularization and ossification during bone repair. However, in most studies, an artificial periosteum cannot restore both functions of the periosteum concurrently. In this study, a novel nanofiber that can sustain the release of vascular endothelial growth factor (VEGF) and bone morphogenetic protein-2 (BMP-2) was fabricated to enhance the durability of angiogenesis and osteogenesis during bone regeneration. A cell-free tissue engineered periosteum based on an electrospinning poly-l-lactic acid (PLLA) nanofiber was fabricated, on which VEGF and BMP-2 were immobilized through a polydopamine (PDA) coating conveniently and safely (BVP@PLLA membrane). The results indicated a significantly improved loading rate as well as a slow and sustained release of VEGF and BMP-2 with the help of the PDA coating. BMP-2 immobilized on nanofibers successfully induced the osteogenic differentiation of human bone marrow mesenchymal stem cells (BMSCs) in vitro with high expression of runt-related transcription factor 2 (Runx2), osteopontin (OPN), and alkaline phosphatase (ALP). Similarly, angiogenic differentiation of BMSCs with the expression of fetal liver kinase-1 (Flk-1) and vascular endothelial cadherin (VE-cadherin) was observed under the environment of VEGF sustained release. Moreover, an in vivo study revealed that the BVP@PLLA membrane could enhance vascular formation and new bone formation, which accelerates bone regeneration in rat femoral defects along with a massive periosteum defect. Therefore, our study suggests that the novel artificial periosteum with dual growth factor controlled release is a promising system to improve bone regeneration in bone defects along with a massive periosteum defect.

Synthesis of Nanoparticles Fully Made of Hemoglobin with Antioxidant Properties: A Step toward the Creation of Successful Oxygen Carriers

Transfusion of donor red blood cells (RBCs) is a crucial and widely employed clinical procedure. However, important constraints of blood transfusions include the limited availability of blood, the need for typing and cross-matching due to the RBC membrane antigens, the limited storage lifetime, or the risk for disease transmission. Hence, a lot of effort has been devoted to develop RBC substitutes, which are free from the limitations of donor blood. Despite the potential, the creation of hemoglobin (Hb)-based oxygen carriers is still facing important challenges. To allow for proper tissue oxygenation, it is essential to develop carriers with high Hb loading since Hb comprises about 96% of the RBCs' dry weight. In this work, nanoparticles (NPs) fully made of Hb are prepared by the desolvation precipitation method. Several parameters are screened (i.e., Hb concentration, desolvation ratio, time, and sonication intensity) to finally obtain Hb-NPs with a diameter of ∼568 nm and a polydispersity index (PDI) of 0.2. A polydopamine (PDA) coating is adsorbed to prevent the disintegration of the resulting Hb/PDA-NPs. Due to the antioxidant character of PDA, the Hb/PDA-NPs are able to deplete two harmful reactive oxygen species, namely, the superoxide radical anion and hydrogen peroxide. Such antioxidant protection also translates into minimizing the oxidation of the entrapped Hb to nonfunctional methemoglobin (metHb). This is a crucial aspect since metHb conversion also results in inflammatory reactions and dysregulated vascular tone. Finally, yet importantly, the reported Hb/PDA-NPs are also both hemo- and biocompatible and preserve the reversible oxygen-binding and releasing properties of Hb.

Bioactivity and Bone Cell Formation with Poly-ε-Caprolactone/Bioceramic 3D Porous Scaffolds

This study applied poly-ε-caprolactone (PCL), a biomedical ceramic powder as an additive (nano-hydroxyapatite (nHA) or β-tricalcium diphosphate (β-TCP)), and sodium chloride (NaCl) and ammonium bicarbonate ((NH4)HCO3) as porogens; these stuffs were used as scaffold materials. An improved solvent-casting/particulate-leaching method was utilized to fabricate 3D porous scaffolds. In this study we examined the physical properties (elastic modulus, porosity, and contact angle) and degradation properties (weight loss and pH value) of the 3D porous scaffolds. Both nHA and β-TCP improved the mechanical properties (elastic modulus) of the 3D porous scaffolds. The elastic modulus (0.15~1.865 GPa) of the various composite scaffolds matched that of human cancellous bone (0.1~4.5 GPa). Osteoblast-like (MG63) cells were cultured, a microculture tetrazolium test (MTT) was conducted and alkaline phosphatase (ALP) activity of the 3D porous scaffolds was determined. Experimental results indicated that both nHA and β-TCP powder improved the hydrophilic properties of the scaffolds. The degradation rate of the scaffolds was accelerated by adding nHA or β-TCP. The MTT and ALP activity tests indicated that the scaffolds with a high ratio of nHA or β-TCP had excellent properties of in vitro biocompatibility (cell attachment and proliferation).

An overview of polyester/hydroxyapatite composites for bone tissue repairing

Objectives

The polyester/hydroxyapatite (polyester/HA) composites play an important role in bone tissue repairing, mostly because they mimic the composition and structure of naturally mineralized bone tissue. This review aimed to discuss commonly used geometries of polyester/HA composites, including microspheres, membranes, scaffolds and bulks, and their applications in bone tissue repairing and to discuss existed restrictions and developing trends of polyester/HA.

Methods

The current review was conducted by searching Web of Science, and Google Scholar for relevant studies published related with polyester/HA composites. Selected studies were analyzed with a focus on the fabrication techniques, properties (mechanical properties, biodegradable properties and biological properties) and applications of polyester/HA composites in bone repairing.

Results

A total of 111 articles were introduced to discuss the review. Different geometries of polyester/HA composites were discussed. In addition, properties and applications of polyester/HA composites were evaluated. The addition of HA into polyester can adjust the mechanical and biodegradability of composites. Besides, the addition of HA into polyester can improve its osteogenic abilities. The results showed that polyester/HA composites can ideal candidate for bone tissue repairing.

Conclusion

Polyester/HA composites have many remarkable properties, such as appropriate mechanical strength, biodegradability, favorable biological properties. Diverse geometries of polyester/HA composites have been used in bone repairing, drug delivery and implant fixation. Further work needs to be done to investigate existed restrictions, including the controlled degradation rate, controlled drug release performance, well-matched mechanical properties, and novel fabrication techniques.

The translational potential of this article

The present review reveals the current state of the polyester/HA composites used in bone tissue repairing, contributing to future trends of polyester/HA composites in the forthcoming future.

Advances in Growth Factor Delivery for Bone Tissue Engineering

Shortcomings related to the treatment of bone diseases and consequent tissue regeneration such as transplants have been addressed to some extent by tissue engineering and regenerative medicine. Tissue engineering has promoted structures that can simulate the extracellular matrix and are capable of guiding natural bone repair using signaling molecules to promote osteoinduction and angiogenesis essential in the formation of new bone tissues. Although recent studies on developing novel growth factor delivery systems for bone repair have attracted great attention, taking into account the complexity of the extracellular matrix, scaffolding and growth factors should not be explored independently. Consequently, systems that combine both concepts have great potential to promote the effectiveness of bone regeneration methods. In this review, recent developments in bone regeneration that simultaneously consider scaffolding and growth factors are covered in detail. The main emphasis in this overview is on delivery strategies that employ polymer-based scaffolds for spatiotemporal-controlled delivery of both single and multiple growth factors in bone-regeneration approaches. From clinical applications to creating alternative structural materials, bone tissue engineering has been advancing constantly, and it is relevant to regularly update related topics.

Surface modification of a three-dimensional polycaprolactone scaffold by polydopamine, biomineralization, and BMP-2 immobilization for potential bone tissue applications

Three-dimensional (3D) bioprinting is a free-form fabrication technique enabling fine feature control for tissue engineering applications. Especially, 3D scaffolds capable of supporting cell attachment, proliferation, and osteogenic differentiation are a prerequisite for bone tissue regeneration. Herein, we elaborated this approach to produce a 3D polycaprolactone (PCL) scaffold with long-term osteogenic activity. Specifically, we coated polydopamine (PDA) on 3D PCL scaffolds, subsequently deposited hydroxyapatite (HA) nanoparticles via biomimetic mineralization, and finally immobilized bone morphogenetic protein-2 (BMP-2). Material properties were characterized and compared with various 3D scaffolds, including PCL, PDA-coated PCL (PCL/PDA), and PDA-coated and HA-deposited PCL (PCL/PDA/HA). In vitro cell culture studies with osteoblasts revealed that the PCL/PDA/HA scaffolds immobilized with BMP-2 showed long-term retention of BMP-2 (for up to 21 days) and significantly increased osteoblast proliferation and osteogenic differentiation, as evidenced by metabolic activity, alkaline phosphatase activity, and calcium deposition. We believe that this multifunctional osteogenic 3D scaffold will be useful for bone tissue engineering applications.

3-D macro/microporous-nanofibrous bacterial cellulose scaffolds seeded with BMP-2 preconditioned mesenchymal stem cells exhibit remarkable potential for bone tissue engineering

Bone repair using BMP-2 is a promising therapeutic approach in clinical practices, however, high dosages required to be effective pose issues of cost and safety. The present study explores the potential of low dose BMP-2 treatment via tissue engineering approach, which amalgamates 3-D macro/microporous-nanofibrous bacterial cellulose (mNBC) scaffolds and low dose BMP-2 primed murine mesenchymal stem cells (C3H10T1/2 cells). Initial studies on cell-scaffold interaction using unprimed C3H10T1/2 cells confirmed that scaffolds provided a propitious environment for cell adhesion, growth, and infiltration, owing to its ECM-mimicking nano-micro-macro architecture. Osteogenic studies were conducted by preconditioning the cells with 50 ng/mL BMP-2 for 15 min, followed by culturing on mNBC scaffolds for up to three weeks. The results showed an early onset and significantly enhanced bone matrix secretion and maturation in the scaffolds seeded with BMP-2 primed cells compared to the unprimed ones. Moreover, mNBC scaffolds alone were able to facilitate the mineralization of cells to some extent. These findings suggest that, with the aid of 'osteoinduction' from low dose BMP-2 priming of stem cells and 'osteoconduction' from nano-macro/micro topography of mNBC scaffolds, a cost-effective bone tissue engineering strategy can be designed for quick and excellent in vivo osseointegration.

Topography: A Biophysical Approach to Direct the Fate of Mesenchymal Stem Cells in Tissue Engineering Applications

Tissue engineering is a promising strategy to treat tissue and organ loss or damage caused by injury or disease. During the past two decades, mesenchymal stem cells (MSCs) have attracted a tremendous amount of interest in tissue engineering due to their multipotency and self-renewal ability. MSCs are also the most multipotent stem cells in the human adult body. However, the application of MSCs in tissue engineering is relatively limited because it is difficult to guide their differentiation toward a specific cell lineage by using traditional biochemical factors. Besides biochemical factors, the differentiation of MSCs also influenced by biophysical cues. To this end, much effort has been devoted to directing the cell lineage decisions of MSCs through adjusting the biophysical properties of biomaterials. The surface topography of the biomaterial-based scaffold can modulate the proliferation and differentiation of MSCs. Presently, the development of micro- and nano-fabrication techniques has made it possible to control the surface topography of the scaffold precisely. In this review, we highlight and discuss how the main topographical features (i.e., roughness, patterns, and porosity) are an efficient approach to control the fate of MSCs and the application of topography in tissue engineering.

Immobilization of BMP-2 and VEGF within Multilayered Polydopamine-Coated Scaffolds and the Resulting Osteogenic and Angiogenic Synergy of Co-Cultured Human Mesenchymal Stem Cells and Human Endothelial Progenitor Cells

We have previously reported the fabrication of a polycaprolactone and hydroxyapatite composite scaffold incorporating growth factors to be used for bone regeneration. Two growth factors were incorporated employing a multilayered coating based on polydopamine (PDA). In particular, Bone morphogenetic protein-2 (BMP-2) was bound onto the inner PDA layer while vascular endothelial growth factor (VEGF) was immobilized onto the outer one. Herein, the in vitro release of both growth factors is evaluated. A fastest VEGF delivery followed by a slow and more sustained release of BMP-2 was demonstrated, thus fitting the needs for bone tissue engineering applications. Due to the relevance of the crosstalk between bone-promoting and vessel-forming cells during bone healing, the functionalized scaffolds are further assessed on a co-culture setup of human mesenchymal stem cells and human endothelial progenitor cells. Osteogenic and angiogenic gene expression analysis indicates a synergistic effect between the growth factor-loaded scaffolds and the co-culture conditions. Taken together, these results indicate that the developed scaffolds hold great potential as an efficient platform for bone-tissue applications.