Silver-based antibacterial strategies for healthcare-associated infections: Processes, challenges, and regulations. An integrated review

Fluorocarbon Plasma-Polymerized Layer Increases the Release Time of Silver Ions and the Antibacterial Activity of Silver-Based Coatings

Silver-based antibacterial coatings limit the spread of hospital-acquired infections. Indeed, the use of silver and silver oxide nanoparticles (Ag and AgO NPs) incorporated in amorphous hydrogenated carbon (a-C:H) as a matrix demonstrates a promising approach to reduce microbial contamination on environmental surfaces. However, its success as an antibacterial coating hinges on the control of Ag+ release. In this sense, if a continuous release is required, an additional barrier is needed to extend the release time of Ag+. Thus, this research investigated the use of a plasma fluoropolymer (CFx) as an additional top layer to elongate Ag+ release and increase the antibacterial activity due to its high hydrophobic nature. Herein, a porous CFx film was deposited on a-C:H containing Ag and AgO NPs using pulsed afterglow low pressure plasma polymerization. The chemical composition, surface wettability and morphology, release profile, and antibacterial activity were analyzed. Overall, the combination of a-C:H:Ag (12.1 at. % of Ag) and CFx film (120.0°, F/C = 0.8) successfully inactivated 88% of E. coli and delayed biofilm formation after 12 h. Thus, using a hybrid approach composed of Ag NPs and a hydrophobic polymeric layer, it was possible to increase the overall antibacterial activity of the coating.

Recent advances in metal-organic frameworks for stimuli-responsive drug delivery

After entering the human body, drugs for treating diseases, which are prone to delivery and release in an uncontrolled manner, are affected by various factors. Based on this, many researchers utilize various microenvironmental changes encountered during drug delivery to trigger drug release and have proposed stimuli-responsive drug delivery systems. In recent years, metal-organic frameworks (MOFs) have become promising stimuli-responsive agents to release the loaded therapeutic agents at the target site to achieve more precise drug delivery due to their high drug loading, excellent biocompatibility, and high stimuli-responsiveness. The MOF-based stimuli-responsive systems can respond to various stimuli under pathological conditions at the site of the lesion, releasing the loaded therapeutic agent in a controlled manner, and improving the accuracy and safety of drug delivery. Due to the changes in different physical and chemical factors in the pathological process of diseases, the construction of stimuli-responsive systems based on MOFs has become a new direction in drug delivery and controlled release. Based on the background of the rapidly increasing attention to MOFs applied in drug delivery, we aim to review various MOF-based stimuli-responsive drug delivery systems and their response mechanisms to various stimuli. In addition, the current challenges and future perspectives of MOF-based stimuli-responsive drug delivery systems are also discussed in this review.

Vapor-Phase-Deposited Ag/Ir and Ag/Au Film Heterostructures for Implant Materials: Cytotoxic, Antibacterial and Histological Studies

Using gas-phase deposition (Physical Vapor Deposition (PVD) and Metal Organic Chemical Vapor Deposition (MOCVD)) methods, modern implant samples (Ti alloy and CFR-PEEK polymer, 30% carbon fiber) were functionalized with film heterostructures consisting of an iridium or gold sublayer, on the surface of which an antibacterial component (silver) was deposited: Ag/Ir(Au)/Ti(CFR-PEEK). The biocidal effect of the heterostructures was investigated, the effect of the surface relief of the carrier and the metal sublayer on antibacterial activity was established, and the dynamics of silver dissolution was evaluated. It has been shown that the activity of Ag/Ir heterostructures was due to high Ag+ release rates, which led to rapid (2-4 h) inhibition of P. aeruginosa growth. In the case of Ag/Au type heterostructures, the inhibition of the growth of P. aeruginosa and S. aureus occurred more slowly (from 6 h), and the antibacterial activity appeared to be due to the contribution of two agents (Ag+ and Au+ ions). It was found, according to the in vitro cytotoxicity study, that heterostructures did not exhibit toxic effects (cell viability > 95-98%). An in vivo biocompatibility assessment based on the results of a morphohistological study showed that after implantation for a period of 30 days, the samples were characterized by the presence of a thin fibrous capsule without volume thickening and signs of inflammation.

Silver/Graphene Oxide Nanostructured Coatings for Modulating the Microbial Susceptibility of Fixation Devices Used in Knee Surgery

Exploring silver-based and carbon-based nanomaterials' excellent intrinsic antipathogenic effects represents an attractive alternative for fabricating anti-infective formulations. Using chemical synthesis protocols, stearate-conjugated silver (Ag@C18) nanoparticles and graphene oxide nanosheets (nGOs) were herein obtained and investigated in terms of composition and microstructure. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) characterizations revealed the formation of nanomaterials with desirable physical properties, while X-ray diffraction (XRD) analyses confirmed the high purity of synthesized nanomaterials. Further, laser-processed Ag@C18-nGO coatings were developed, optimized, and evaluated in terms of biological and microbiological outcomes. The highly biocompatible Ag@C18-nGO nanostructured coatings proved suitable candidates for the local modulation of biofilm-associated periprosthetic infections.

Silver nanoparticle technology in orthopaedic infections

The irrational and prolonged use of antibiotics in orthopaedic infections poses a major threat to the development of antimicrobial resistance. To combat antimicrobial resistance, researchers have implemented various novel and innovative modalities to curb infections. Nanotechnology involves doping ions/metals onto the scaffolds to reach the target site to eradicate the infective foci. In this connotation, we reviewed silver nanoparticle technology in terms of mechanism of action, clinical applications, toxicity, and regulatory guidelines to treat orthopaedic infections.

Surface Modification of Biomedical Ti-18Zr-15Nb Alloy by Atomic Layer Deposition and Ag Nanoparticles Decoration

Superelastic biocompatible alloys attract significant attention as novel materials for bone tissue replacement. These alloys are often composed of three or more components that lead to the formation of complex oxide films on their surfaces. For practical use, it is desirable to have a single-component oxide film with a controlled thickness on the surface of biocompatible material. Herein we investigate the applicability of the atomic layer deposition (ALD) technique for surface modification of Ti-18Zr-15Nb alloy with TiO₂ oxide. It was found that a 10-15 nm thick, low-crystalline TiO₂ oxide layer is formed by ALD method over the natural oxide film (~5 nm) of the Ti-18Zr-15Nb alloy. This surface consists of TiO₂ exclusively without any additions of Zr or Nb oxides/suboxides. Further, the obtained coating is modified by Ag nanoparticles (NPs) with a surface concentration up to 1.6% in order to increase the material's antibacterial activity. The resulting surface exhibits enhanced antibacterial activity with an inhibition rate of more than 75% against E. coli bacteria.

Antibacterial activity of CuO-Ag Janus like nanoparticles against recombinant strain Escherichia coli

The toxic action of CuO-Ag Janus particles and a bicomponent mixture of CuO and Ag particles have been studied against a recombinant strain Escherichia coli K12 TG1 with cloned luxCDABE genes of marine bacteria Photobacterium leiognathi 54D10. An original method was used for the preparation CuO-Ag Janus like  nanoparticles by simultaneous electrical explosion of twisted Cu and Ag wires in a mixture of argon and oxygen gases. The bioluminescence inhibition on recombinant strain E. coli shows that CuO-Ag Janus NPs were effective. The concentration by 50% (EC₅₀) for CuO-Ag Janus NPs was 0.03 ± 0.001 mg/ml (p < 0.05). The bioactivity of the bicomponent mixture of CuO and Ag NPs (EC₅₀) was 0.25 ± 0.002 mg/ml (p < 0.05). The effective concentration of CuO-Ag Janus NPs against E. coli was comparatively lower than those of bicomponent mixture CuO and Ag against which explains the higher activity of CuO-Ag Janus NPs. The toxicity values of CuO and Ag as monocomponent nanoparticles were 2-32 times lower compared with the bicomponent nanoparticles. A dose-dependent inhibition of bacterial luminescence developed over time was noted. The result of contact E. coli with CuO-Ag Janus particles was 100% suppression of bacterial luminescence from the first minutes of contact occured starting with a content of 2.0 mg/ml and within the next 180 min. The effect of bioactivity prolonged in the final concentration of nanopowder (EC₁₀₀ = 0.0625 ± 0.002 mg/ml) (p < 0.05). CuO-Ag Janus particles exhibited more pronounced antibacterial activity compared to CuO, Ag nanoparticles and their mechanical mixture.

FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability

The development of bioresorbable materials for temporary implantation enables progress in medical technology. Iron (Fe)-based degradable materials are biocompatible and exhibit good mechanical properties, but their degradation rate is low. Aside from alloying with Manganese (Mn), the creation of phases with high electrochemical potential such as silver (Ag) phases to cause the anodic dissolution of FeMn is promising. However, to enable residue-free dissolution, the Ag needs to be modified. This concern is addressed, as FeMn modified with a degradable Ag-Calcium-Lanthanum (AgCaLa) alloy is investigated. The electrochemical properties and the degradation behavior are determined via a static immersion test. The local differences in electrochemical potential increase the degradation rate (low pH values), and the formation of gaps around the Ag phases (neutral pH values) demonstrates the benefit of the strategy. Nevertheless, the formation of corrosion-inhibiting layers avoids an increased degradation rate under a neutral pH value. The complete bioresorption of the material is possible since the phases of the degradable AgCaLa alloy dissolve after the FeMn matrix. Cell viability tests reveal biocompatibility, and the antibacterial activity of the degradation supernatant is observed. Thus, FeMn modified with degradable AgCaLa phases is promising as a bioresorbable material if corrosion-inhibiting layers can be diminished.

Fungicidal and antibiofilm activities of gold nanoparticles on Candida tropicalis

Aim: To investigate the antifungal activity of two different functionalized gold nanoparticles (AuNP), those stabilized with cetyltrimethylammonium bromide and those conjugated with cysteine, and their effects on the architecture of Candida tropicalis biofilms. Materials & methods: Biofilms were studied by crystal violet binding assay and scanning electron microscopy. We investigated the effects of AuNPs on reactive oxygen species, reactive nitrogen intermediates and enzymatic and nonenzymatic antioxidant defenses. Results/Conclusion: The fungicidal activity and cellular stress of both AuNPs affected biofilm growth through accumulation of reactive oxygen species and reactive nitrogen intermediates. However, cetyltrimethylammonium bromide-stabilized AuNPs revealed a higher redox imbalance. We correlated, for the first time, AuNP effects with the redox imbalance and alterations in the architecture of C. tropicalis biofilms.

Biosynthesis of silver nanoparticles using extracts of Stevia rebaudiana and evaluation of antibacterial activity

The present study reveals a simple, non-toxic and eco-friendly method for the "green" synthesis of Ag-NPs using hydroponic and soil medicinal plant Stevia rebaudiana extracts, the characterization of biosynthesized nanoparticles, as well as the evaluation of their antibacterial activity. Transmission electronic microscopy (TEM) and Dynamic Light Scattering (DLS) analysis confirmed that biosynthesized Ag-NPs are in the nano-size range (50-100 nm) and have irregular morphology. Biogenic NPs demonstrate antibacterial activity against Escherichia coli BW 25,113, Enterococcus hirae ATCC 9790, and Staphylococcus aureus MDC 5233. The results showed a more pronounced antibacterial effect on E. coli growth rate, in comparison with Gram-positive bacteria, which is linked to the differences in the structure of bacterial cell wall. Moreover, the Ag-NPs not only suppressed the growth of bacteria but also changed the energy-dependent H⁺-fluxes across the bacterial membrane. The change of H⁺-fluxes in presence of H⁺-translocating systems inhibitor, N,N'-dicyclohexylcarbodiimide (DCCD), proves the effect of Ag-NPs on the structure and permeability of the bacterial membrane. Overall, our findings indicate that the Ag-NPs synthesized by medicinal plant Stevia extracts may be an excellent candidate as an alternative to antibiotics against the tested bacteria.

Nanostructured Polyacrylamide Hydrogels with Improved Mechanical Properties and Antimicrobial Behavior

This work proposes a simple method to obtain nanostructured hydrogels with improved mechanical characteristics and relevant antibacterial behavior for applications in articular cartilage regeneration and repair. Low amounts of silver-decorated carbon-nanotubes (Ag@CNTs) were used as reinforcing agents of the semi-interpenetrating polymer network, consisting of linear polyacrylamide (PAAm) embedded in a PAAm-methylene-bis-acrylamide (MBA) hydrogel. The rational design of the materials considered a specific purpose for each employed species: (1) the classical PAAm-MBA network provides the backbone of the materials; (2) the linear PAAm (i) aids the dispersion of the nanospecies, ensuring the systems' homogeneity and (ii) enhances the mechanical properties of the materials with regard to resilience at repeated compressions and ultimate compression stress, as shown by the specific mechanical tests; and (3) the Ag@CNTs (i) reinforce the materials, making them more robust, and (ii) imprint antimicrobial characteristics on the obtained scaffolds. The tests also showed that the obtained materials are stable, exhibiting little degradation after 4 weeks of incubation in phosphate-buffered saline. Furthermore, as revealed by micro-computed tomography, the morphometric features of the scaffolds are adequate for applications in the field of articular tissue regeneration and repair.

Durable Surfaces from Film-Forming Silver Assemblies for Long-Term Zero Bacterial Adhesion without Toxicity

The long-term prevention of biofilm formation on the surface of indwelling medical devices remains a challenge. Silver has been reutilized in recent years for combating biofilm formation due to its indisputable bactericidal potency; however, the toxicity, low stability, and short-term activity of the current silver coatings have limited their use. Here, we report the development of silver-based film-forming antibacterial engineered (SAFE) assemblies for the generation of durable lubricous antibiofilm surface long-term activity without silver toxicity that was applicable to diverse materials via a highly scalable dip/spray/solution-skinning process. The SAFE coating was obtained through a large-scale screening, resulting in effective incorporation of silver nanoparticles (∼10 nm) into a stable nonsticky coating with high surface hierarchy and coverage, which guaranteed sustained silver release. The lead coating showed zero bacterial adhesion over a 1 month experiment in the presence of a high load of diverse bacteria, including difficult-to-kill and stone-forming strains. The SAFE coating showed high biocompatibility and excellent antibiofilm activity in vivo.

The Role of Abdominal Drain Cultures in Managing Abdominal Infections

Intra-abdominal infections (IAI) are common in hospitalized patients, both in and outside of the intensive care unit. Management principles include antimicrobial therapy and source control. Typically, these infections are polymicrobial, and intra-operative samples will guide the targeted antimicrobial therapy. Although the use of prophylactic abdominal drains in patients undergoing abdominal surgery is decreasing, the use of drains to treat IAI, both in surgical and non-surgical strategies for abdominal infection, is increasing. In this context, samples from abdominal drains are often used to assist in antimicrobial decision making. In this narrative review, we provide an overview of the current role of abdominal drains in surgery, discuss the importance of biofilm formation in abdominal drains and the mechanisms involved, and review the clinical data on the use of sampling these drains for diagnostic purposes. We conclude that biofilm formation and the colonization of abdominal drains is common, which precludes the use of abdominal fluid to reliably diagnose IAI and identify the pathogens involved. We recommend limiting the use of drains and, when present, avoiding routine microbiological sampling.

The effect of silver fibre gloves on Raynaud's phenomenon in patients with systemic sclerosis: a double-blind randomized crossover trial

OBJECTIVES

Silver fibre gloves transport heat from the palm to the fingers, possibly reducing the burden of RP in SSc patients. We aim to evaluate the clinical efficiency of this intervention.

METHODS

A multicentre, double-blind, randomized trial was performed, accounting for interindividual differences and external factors using a crossover design. Patients were randomized in two groups: group 1 wore 8% silver fibre gloves in period 1 and normal gloves in period 2 and group 2 vice versa. Each period lasted 6 weeks. The primary outcome was the Raynaud Condition Score (RCS) over time (minimal clinical important difference 1.4), assessed three times per week using an online questionnaire. Secondary outcomes included vascular complications and Scleroderma-Health Assessment Questionnaire (SHAQ). Outcomes were evaluated before unblinding using linear mixed models.

RESULTS

A total of 85 SSc patients were included, with 76 completing the study. The mean RCS during 2 weeks before the study (i.e. without gloves) was 6.4 (s.d. 1.6). Both with silver fibre gloves and normal gloves the mean RCS decreased to 3.9 (s.d. 2.3) with a similar course over time. There was no difference in mean RCS over time between the type of gloves [β = 0.067 (95% CI -0.006, 0.19)]. Of secondary outcomes, total SHAQ [β = 0.036 (95% CI 0.026, 0.046)] was slightly higher with silver fibre gloves, which is clinically irrelevant. Three patients developed new digital ulcers with normal gloves vs one patient with silver fibre gloves [odds ratio 3.2 (95% CI 0.32, 31.1)].

CONCLUSIONS

Wearing gloves in SSc patients clearly decreases the RP burden. Our results do not support the hypothesis that increased heat transport of 8% silver fibre gloves is associated with less disease burden as measured in this study by the RCS compared with normal gloves.

CLINICAL TRIAL REGISTRATION NUMBER

Netherlands Trial register (https://www.trialregister.nl/) NL7904.

Surface Modification of Titanium by Femtosecond Laser in Reducing Bacterial Colonization

In the past few decades, titanium and its alloys have been widely used in the orthopaedic field. However, because titanium is bioinert and lacks antibacterial properties, infection may happen when bacteria attach to implant surfaces and form biofilms. It has been studied that some naturally existing micron-scale topographies can reduce bacterial attachment such as cicada wings and gecko skins. The aim of this in vitro study was to find an implant with good biocompatibility and antimicrobial properties by the modification of micron-scale topographies. In this paper, a femtosecond laser was used to provide microtopography coatings on Ti substrates. The surface morphology of Ti substrates was observed by scanning electron microscopy (SEM). XPS was used to fulfil the chemical compositional analysis. The surface wettability was measured by contact angle measurement system. The effect of microtopography coatings with different surface microstructures on bacterial activities and bone marrow mesenchymal stem cells (BMSC) functions was investigated. The results of in vitro study revealed that microtopography coatings restrain the adhesion of Staphylococcus aureus (S. aureus) and Staphylococcus epidermidis (S. epidermidis), which are common pathogens of orthopaedic implant infections. In addition, microtopography coatings stimulated BMSC adhesion and proliferation. Our studies suggest that a microtopography-coated sample modified by femtosecond laser showed promising antibacterial properties and favourable biocompatibility. The femtosecond laser technique provides an accurate and valid way to produce microtopography coatings with outstanding biocompatibility and antimicrobial properties, and could be widely used to modify the surface of orthopaedic metal implants with great potential.

Antimicrobial and Aging Properties of Ag-, Ag/Cu-, and Ag Cluster-Doped Amorphous Carbon Coatings Produced by Magnetron Sputtering for Space Applications

Inside a spacecraft, the temperature and humidity, suitable for the human crew onboard, also creates an ideal breeding environment for the proliferation of bacteria and fungi; this can present a hazard to human health and create issues for the safe running of equipment. To address this issue, wear-resistant antimicrobial thin films prepared by magnetron sputtering were developed, with the aim to coat key internal components within spacecrafts. Silver and copper are among the most studied active bactericidal materials, thus this work investigated the antibacterial properties of amorphous carbon coatings, doped with either silver, silver and copper, or with silver clusters. The longevity of these antimicrobial coatings, which is heavily influenced by metal diffusion within the coating, was also investigated. With a conventional approach, amorphous carbon coatings were prepared by cosputtering, to generate coatings that contained a range of silver and copper concentrations. In addition, coatings containing silver clusters were prepared using a separate cluster source to better control the metal particle size distribution in the amorphous carbon matrix. The particle size distributions were characterized by grazing-incidence small-angle X-ray scattering (GISAXS). Antibacterial tests were performed under both terrestrial gravity and microgravity conditions, to simulate the condition in space. Results show that although silver-doped coatings possess extremely high levels of antimicrobial activity, silver cluster-doped coatings are equally effective, while being more long-lived, despite containing a lower absolute silver concentration.

Preparation of mussel-inspired silver/polydopamine antibacterial biofilms on Ti-6Al-4V for dental applications

The properties of osseointegration and antibacterial ability is vital import for dental materials. Herein, we designed the multilayer TC4-Ag-polydopamine coatings, to provide TC4 with slow-release antibacterial properties whilst maintaining cytocompatibility. In brief, thickness of Ag inner layer can be easily controlled by magnetron sputtering technology. The resulting top polydopamine layer protected the Ag well from corrosion and gave a sustained release of Ag⁺ up to one month. In addition, the prepared TC4-Ag-polydopamine samples with Ag thickness of 20 and 30 nm, showed high hydrophilic performance with the contact-angle less than 20°, low cytotoxicity and good cytocompatibility. Expectedly, it could become a prospective candidate for future slow-release antibacterial dental materials.

Phosphorylated xanthan gum-Ag(I) complex as antibacterial viscosity enhancer for eye drops formulation

Topical instillation of eye drops represents the treatment of choice for many ocular diseases. Ophthalmic formulations must meet general requirements, i.e. pH, osmolality, transparency and viscosity to ensure adequate retention without inducing irritation and the development of eye infections. We developed a phosphorylated xanthan gum-Ag(I) complex (XGP-Ag) showing pH (pH = 7.1 ± 0.3) and osmolality values (311 ± 2 mOsm/kg) close to that of human tears (pH = 6.5-7.6 and 304 ± 23 mOsm/kg) thanks to the presence of phosphate moieties along the chain. The presence of phosphate groups covalently bound to the XG chains avoids their dispersion in fluid, thus reducing the risk of corneal calcification. 0.02% w/v XGP-Ag solution showed high transparency (higher than 95% along the entire visible range), adequate refractive index (1.334 ± 0.001) and viscosity in the range: γ 1 s^-1-10,000 s^{- 1} (26.4 ± 0.8-2.1 ± 0.4 mPa·s). Its cytotoxicity and capability to hinder bacterial proliferation was also verified.

Platelet membrane-camouflaged silver metal-organic framework drug system against infections caused by methicillin-resistant Staphylococcus aureus

Background

Due to the intelligent survival strategy and self-preservation of methicillin-resistant Staphylococcus aureus (MRSA), many antibiotics are ineffective in treating MRSA infections. Nano-drug delivery systems have emerged as a new method to overcome this barrier. The aim of this study was to construct a novel nano-drug delivery system for the treatment of MRSA infection, and to evaluate the therapeutic effect and biotoxicity of this system. We prepared a nano silver metal-organic framework using 2-methylimidazole as ligand and silver nitrate as ion provider. Vancomycin (Vanc) was loaded with Ag-MOF, and nano-sized platelet vesicles were prepared to encapsulate Ag-MOF-Vanc, thus forming the novel platelet membrane-camouflaged nanoparticles PLT@Ag-MOF-Vanc.

Results

The synthesized Ag-MOF particles had uniform size and shape of radiating corona. The mean nanoparticle size and zeta potential of PLT@Ag-MOF-Vanc were 148 nm and − 25.6 mV, respectively. The encapsulation efficiency (EE) and loading efficiency (LE) of vancomycin were 81.0 and 64.7 %, respectively. PLT@Ag-MOF-Vanc was shown to be a pH-responsive nano-drug delivery system with good biocompatibility. Ag-MOF had a good inhibitory effect on the growth of three common clinical strains (Escherichia coli, Pseudomonas aeruginosa, and S. aureus). PLT@Ag-MOF-Vanc showed better antibacterial activity against common clinical strains in vitro than free vancomycin. PLT@Ag-MOF-Vanc killed MRSA through multiple approaches, including interfering with the metabolism of bacteria, catalyzing reactive oxygen species production, destroying the integrity of cell membrane, and inhibiting biofilm formation. Due to the encapsulation of the platelet membrane, PLT@Ag-MOF-Vanc can bind to the surface of the MRSA bacteria and the sites of MRSA infection. PLT@Ag-MOF-Vanc had a good anti-infective effect in mouse MRSA pneumonia model, which was significantly superior to free vancomycin, and has no obvious toxicity.

Conclusions

PLT@Ag-MOF-Vanc is a novel effective targeted drug delivery system, which is expected to be used safely in anti-infective therapy of MRSA.

Graphic abstract

Comparison of Antibacterial Mode of Action of Silver Ions and Silver Nanoformulations With Different Physico-Chemical Properties: Experimental and Computational Studies

The aim of this study was to compare the antibacterial mode of action of silver ions (Ag⁺) and selected silver nanoformulations against E. coli strains (E. coli J53, Escherichia coli BW25113 and its derivatives: Δ ompA, Δ ompC, Δ ompF, Δ ompR, ompRG596AcusSG1130A, cusSG1130A). In this research we used various experimental methods and techniques such as determination of the minimal inhibitory concentration, flow cytometry, scanning electron microscopy, circular dichroism as well as computational methods of theoretical chemistry. Thanks to the processing of bacteria and silver samples (ions and nanoformulations), we were able to determine the bacterial sensitivity to silver samples, detect reactive oxygen species (ROS) in the bacterial cells, visualize the interaction of silver samples with the bacterial cells, and identify their interactions with proteins. Differences between the mode of action of silver ions and nanoformulations and the action of nanoformulations themselves were revealed. Based on the results of computational methods, we proposed an explanation of the differences in silver-outer protein interaction between silver ions and metallic silver; in general, the Ag⁰ complexes exhibit weaker interaction than Ag⁺ ones. Moreover, we identified two gutter-like areas of the inner layer of the ion channel: one more effective, with oxygen-rich side chains; and another one less effective, with nitrogen-rich side chains.

Multifunctional hybrid nanoplatform based on Fe3O4@Ag NPs for nitric oxide delivery: development, characterization, therapeutic efficacy, and hemocompatibility

The combination of Fe₃O₄@Ag superparamagnetic hybrid nanoparticles and nitric oxide (NO) represents an innovative strategy for a localized NO delivery with a simultaneous antibacterial and antitumoral actions. Here, we report the design of Fe₃O₄@Ag hybrid nanoparticles, coated with a modified and nitrosated chitosan polymer, able to release NO in a biological medium. After their synthesis, physicochemical characterization confirmed the obtention of small NO-functionalized superparamagnetic Fe₃O₄@Ag NPs. Antibacterial assays demonstrated enhanced effects compared to control. Bacteriostatic effect against Gram-positive strains and bactericidal effect against E. coli were demonstrated. Moreover, NO-functionalized Fe₃O₄@Ag NPs demonstrated improved ability to reduce cancer cells viability and less cytotoxicity against non-tumoral cells compared to Fe₃O₄@Ag NPs. These effects were associated to the ability of these NPs act simultaneous as cytotoxic (necrosis inductors) and cytostatic compounds inducing S-phase cell cycle arrest. NPs also demonstrated low hemolysis ratio (<10%) at ideal work range, evidencing their potential for biomedical applications. Targeted and hemocompatible nitric oxide-releasing multi-functional hybrid nanoparticles for antitumor and antimicrobial applications.

Lectin Protein as a Promising Component to Functionalize Micelles, Liposomes and Lipid NPs against Coronavirus

The outbreak of a novel strain coronavirus as the causative agent of COVID-19 pneumonia, first identified in Wuhan, China in December 2019, has resulted in considerable focus on virulence abilities of coronavirus. Lectins are natural proteins with the ability to bind specific carbohydrates related to various microorganisms, including viruses, bacteria, fungi and parasites. Lectins have the ability to agglutinate and neutralize these pathogeneses. The delivery of the encapsulated antiviral agents or vaccines across the cell membrane can be possible by functionalized micellar and liposomal formulations. In this mini-review, recent advances and challenges related to important lectins with inhibition activities against coronaviruses are presented to obtain a novel viewpoint of microformulations or nanoformulations by micellar and liposomal cell-binding carriers.

COVID-19 and a novel initiative to improve safety by 3D printing personal protective equipment parts from computed tomography

BACKGROUND

Powered air-purifying respirators are in short supply and can break down with extended use. Replacement parts can become hard to acquire. The aim of this study was to create an innovative quality improvement proof of concept using rapid prototyping.

METHODS

Here we report three cases of 3D printed powered air-purifying respirator parts. 3D printing was performed on all parts using fused deposition modeling with standard polylactic acid, in the same way that presurgical models would be created. Measurements using an electronic caliper as well as CT scans were used to compare an original part to its corresponding 3D printed parts for accuracy.

RESULTS

Electronic caliper and computed tomography measurements both showed accuracy consistant with current published norms.

CONCLUSIONS

Ultimately, there will be questions surrounding intellectual property, effectiveness and potential long-term safety for these types of 3D printed parts. Future research should look into the addition of specific nanoparticles from the position of cost, efficacy, safety and improved accuracy.

Evaluation of Antibacterial and Cytotoxicity Properties of Silver Nanowires and Their Composites with Carbon Nanotubes for Biomedical Applications

In this work, we prepared silver nanowires (AgNWs) via the polyol method in the presence or absence of single wall carbon nanotubes (CNTs) and tested their physicochemical, antibacterial and cytotoxic properties. Results showed that the introduction of CNTs lead to the formation of AgNWs at lower temperature, but the final product characteristics of AgNWs and AgNWs-CNT were not significantly different. AgNWs exhibited antibacterial properties against all the studied bacterial species via the formation of oxygen reactive species (ROS) and membrane damage. Furthermore, AgNWs exhibited a dose-dependent and time-dependent toxicity at concentrations ≥ 10 µg/mL. Fibroblasts appeared to be more resistant than human colorectal adenocarcinoma (Caco-2) and osteoblasts to the toxicity of AgNWs. The cytotoxicity of AgNWs was found to be related to the formation of ROS, but not to membrane damage. Overall, these results suggest that AgNWs are potential antibacterial agents against E. coli, S. aureus, MRSA and S. saprophyticus, but their dosage needs to be adjusted according to the route of administration.