Failure modes of 433 metal-on-metal hip implants: how, why, and wear

Early Failure of a Novel Modular Dual Mobility Liner After Metal Release: Clinical Presentation and Detailed Retrieval Analysis

Cobalt chrome alloy (CoCrMo) corrosion and subsequent metal release has been described as a potential complication of total hip arthroplasty. Here, we present the case of a patient with a well-seated dual mobility (DM) implant revised after 10 months. Prior to revision, the patient experienced pain and stiffness. Following a negative infection workup, we measured elevated metal concentrations, hypothesized to originate from the CoCrMo DM liner. While corrosion has been extensively reported in other constructs, the CoCrMo liner described here includes a post and tabs, features added to reduce the risk of corrosion. Retrieval analysis demonstrated a severe chemically based corrosion attack on the liner. Continued caution and ongoing close monitoring of outcomes associated with the use of modular DM constructs is likely warranted.

Metallosis in Total Hip Arthroplasty

» Metallosis is a rare but significant complication that can occur after total hip arthroplasty (THA) for a variety of reasons but most commonly in patients with metal-on-metal implants.» It is characterized by the visible staining, necrosis, and fibrosis of the periprosthetic soft tissues, along with the variable presence of aseptic cysts and solid soft tissue masses called pseudotumors secondary to the corrosion and deposition of metal debris.» Metallosis can present with a spectrum of complications ranging from pain and inflammation to more severe symptoms such as osteolysis, soft tissue damage, and pseudotumor formation.» Workup of metallosis includes a clinical evaluation of the patient's symptoms, imaging studies, serum metal-ion levels, and intraoperative visualization of the staining of tissues. Inflammatory markers such as erythrocyte sedimentation rate and C-reactive protein along with intraoperative frozen slice analysis may be useful in certain cases to rule out concurrent periprosthetic joint infection.» Management depends on the severity and extent of the condition; however, revision THA is often required to prevent rapid progression of bone loss and tissue necrosis.

Statistical Shape Modelling the In Vivo Location of Acetabular Wear in Retrieved Hip Implants

Edge-wear in acetabular cups is known to be correlated with greater volumes of material loss; the location of this wear pattern in vivo is less understood. Statistical shape modelling (SSM) may provide further insight into this. This study aimed to identify the most common locations of wear in vivo, by combining CT imaging, retrieval analysis and SMM. Shape variance was described in 20 retrieved metal-on-metal acetabular surfaces. These were revised after a mean of 90 months, from 13 female and seven male patients. They were positioned with a mean inclination and anteversion of 53° and 30°, respectively. Their orientation, in vivo, was established using their stabilising fins, visible in pre-revision CT imaging. The impact of wear volume, positioning, time, gender and size on the in vivo location of wear was investigated. These surfaces had a mean wear volume of 49.63 mm³. The mean acetabular surface displayed superior edge-wear centred 7° within the posterosuperior quadrant, while more of the volumetric wear occurred in the anterosuperior quadrant. Components with higher inclination had greater superior edge-wear scars, while a relationship was observed between greater anteversion angles and more posterosuperior edge-wear. This SSM method can further our understanding of hip implant function, informing future design and may help to refine the safe zone for implant positioning.

Semi-quantitative histology confirms that the macrophage is the predominant cell type in metal-on-metal hip tissues

Numerous studies have examined the histology of metal-on-metal hip tissues for evidence of a dose response to metal wear but have often reported inconclusive or contradictory findings. The aim of the present study was to address these discrepancies using multiple histological scoring methods to characterize the tissue features of one large group of revised metal-on-metal total hips. Periprosthetic tissues from 165 metal-on-metal hip revisions were examined for features of aseptic lymphocytic vasculitis associated lesions (ALVAL) as rated using two scoring systems as well as rankings for macrophage and lymphocyte numbers, intracellular wear debris and necrosis. Correlations between histological features and clinical variables including gender and time to revision and implant variables including articular surface wear volume or visual taper corrosion scores were examined. Both ALVAL scores reflected the macrophage dominated histology with average scores of 5.9/10 and 1.5/3. There was a statistically significant correlation between the original ALVAL score and wear rate per year (correlation coefficient = 0.17, p = .05) and a moderate correlation between the number of macrophages and wear particles and wear volume. There was no statistically significant correlation between wear and any other feature including lymphocytic inflammation or necrosis. Strong correlations between combined cup and ball wear volume and histological characteristics were not observed, although the number of macrophages was more closely correlated with wear than lymphocytes or necrosis.

Pinnacle Ultamet metal-on-metal total hip arthroplasty survivorship: average 10-year follow-up

Background

It is unclear whether a connection exists between femoral head size, offset, neck length, and cup abduction angles, and rate of revision in metal-on-metal (MoM) total hip arthroplasty (THA) implant systems.

Methods

A retrospective review of MoM THA completed by a single surgeon with a single implant between 2003 and 2008 was conducted. Patient demographics, implant data, radiographs, and revision details were collected at follow-up. Incidence rates for revision and osteolysis were calculated in regard to the femoral head size, stem offset, neck length, and cup abduction angles.

Results

Six hundred and ninety two THAs were identified, with 79% of patients returning for a median follow-up of 10.3 years (interquartile range = 6.0-12.3). The median time to revision was 7.5 years (interquartile range = 5.3-9.9) among 27 total revision surgeries. The overall incidence rate of revision was 5.4 revisions per 1000 person-years, 3.0 revisions per 1000 person-years for adverse local tissue reaction. Hips with a cup abduction angle of ≤40° had revisions at nearly twice the rate of those with an angle of 41°-50° (incidence rate ratio = 1.98, 95% confidence interval: 0.92, 4.29). Hips with a 9 mm neck length had an increased rate of revision (incidence rate ratio = 5.94, 95% confidence interval: 1.33, 26.55) relative to those with a neck length of 0 mm. Rates of osteolysis were similar between implants of different head sizes, neck lengths and cup abduction angles.

Conclusions

MoM implant systems with longer necks and smaller cup abduction angles may lead to increased need for revision. Results from this study suggest a need for closer long-term follow-up of MoM THA systems.

Mechanical Properties and Biocompatibility of Ti-doped Diamond-like Carbon Films

A series of Ti/Ti-diamond-like carbon (Ti-DLC) films was deposited onto monocrystalline Si substrates by dual-magnetron sputtering. The mechanical properties, chemical composition, and microstructure of the films were investigated by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), X-ray diffraction (XRD), and nanoindentation. The biocompatibility of the Ti-DLC films was evaluated via cell viability testing. The TiC phase was formed at a Ti content of 4.43 atom %, and the surface roughness gradually increased as the Ti content increased. Ti-DLC films with 17.13 atom % Ti exhibited superior adhesion strength and surface hardness. The optical densities (ODs) of the different Ti-DLC films were similar, indicating that the films exhibit biocompatibility regardless of the Ti content. Overall, doping DLC films with Ti provides a better film for medical applications, as it improves the mechanical properties, as evidenced by the elastic modulus, hardness, adhesion strength, and surface roughness of the coating, and maintains ideal biocompatibility.

Comparison of Harris Hip Scores and Revision Rates in Metal-on-Metal Versus Non-Metal-on-Metal Total Hip Arthroplasty

INTRODUCTION

This study compares functional outcome scores and revision rates between metal-on-metal (MoM) and non-MoM total hip arthroplasty patients.

METHODS

A cohort of 75 patients who underwent implantation of the same dual modular hip arthroplasty between the years of 2004 and 2010 was enrolled. Patients were subsequently evaluated in 2015 to 2017 for joint revision history and functionality, as measured by the Harris hip score (HHS). Patients requiring a revision arthroplasty were not included in the HHS analysis.

RESULTS

A total of 49 patients had MoM implants (65.3%), and 26 patients had non-MoM implants (34.8%). At a mean follow-up of 7.6 years, 10.2% (5/49) of MoM prostheses required revision, whereas 3.8% (1/26) of non-MoM prostheses required revision (P = 0.334). The mean HHS in the MoM cohort was 89.8, compared with 88.1 in the non-MoM cohort (P = 0.69).

CONCLUSION

HHSs were not notably different between cohorts. The MoM cohort had three times as many revisions as the non-MoM cohort, but given the numbers available, this difference did not reach significance. Given the clinical importance of these revision data, further study is warranted to determine survivorship of the MoM versus non-MoM total hip arthroplasty at long-term follow-up.

Diamond-like carbon films over reconstructive TMJ prosthetic materials: Effects in the cytotoxicity, chemical and mechanical properties

Increasingly more young patients have been submitted to reconstruction of the Temporomandibular Joint (TMJ), so, the prostheses must to present more functional longevity.

Objective

To evaluate the effect of diamond-like carbon film (DLC) over titanium alloy (Ti6Al4V) and polyethylene (UHWPE) samples, their mechanical and chemical properties and cellular cytotoxicity.

Methods

Titanium and UHWPE specimens, with 2.5 cm in diameter and 2 mm thickness were coated through plasma enhanced chemical vapor deposition (PECVD) with DLC or DLC doped with silver (DLC-Ag). Scanning electron microscopy (SEM) morphological analysis, Energy-dispersive spectroscopy (EDS) chemical analysis, scratching test, mechanical fatigue test, surface roughness analysis, and cellular cytotoxicity were performed. Data were statistically analyzed using one-way ANOVA (p < 0.05) or two-way ANOVA and multiple comparison Tukey test.

Results

In the SEM analysis, morphological differences were observed on substrates after DLC deposition. The film chemically modified the substrate surfaces, according to the EDS analysis. The initial critical load failure occurred at 6.1 N for DLC and 9.7 N for the DLC-Ag film. The DLC film deposition over the polyethylene promoted a decrease in the polymer's damaged area after mechanical fatigue cycling. The cytotoxicity analysis demonstrated less biocompatibility in experimental groups, when compared to control, however, increased biocompatibility was observed, at 10 days, in all groups.

Conclusion

The diamond-like carbon coating enhanced the chemical and mechanical properties from substrates, however modified biological interaction course of the titanium alloy (Ti6Al4V) and polyethylene (UHWPE) samples. Parameters for film deposition remain to be improved in order to obtain best biocompatibility.

Host-specific factors affect the pathogenesis of adverse reaction to metal debris

Background

Adverse Reaction to Metal Debris (ARMD) is a major reason for revision surgeries in patients with metal-on-metal (MoM) hip replacements. Most failures are related to excessively wearing implant producing harmful metal debris (extrinsic factor). As ARMD may also occur in patients with low-wearing implants, it has been suggested that there are differences in host-specific intrinsic factors contributing to the development of ARMD. However, there are no studies that have directly assessed whether the development of ARMD is actually affected by these intrinsic factors.

Methods

We included all 29 patients (out of 33 patients) with sufficient data who had undergone bilateral revision of ASR MoM hips (58 hips) at our institution. Samples of the inflamed synovia and/or pseudotumour were obtained perioperatively and sent to histopathological analysis. Total wear volumes of the implants were assessed. Patients underwent MARS-MRI imaging of the hips preoperatively. Histological findings, imaging findings and total wear volumes between the hips of each patient were compared.

Results

The difference in wear volume between the hips was clinically and statistically significant (median difference 15.35 mm³, range 1 to 39 mm³, IQR 6 to 23 mm³) (p < 0.001). The median ratio of total wear volume between the hips was 2.0 (range 1.09 to 10.0, IQR 1.67 to 3.72). In majority of the histological features and in presence of pseudotumour, there were no differences between the left and right hip of each patient (p > 0.05 for all comparisons). These features included macrophage sheet thickness, perivascular lymphocyte cuff thickness, presence of plasma cells, presence of diffuse lymphocytic infiltration and presence of germinal centers.

Conclusions

Despite the significantly differing amounts of wear (extrinsic factor) seen between the sides, majority of the histological findings were similar in both hips and the presence of pseudotumour was symmetrical in most hips. As a direct consequence, it follows that there must be intrinsic factors which contribute to the symmetry of the findings, ie. the pathogenesis of ARMD, on individual level. This has been hypothesized in the literature but no studies have been conducted to confirm the hypothesis. Further, as the threshold of metal debris needed to develop ARMD appears to be largely variable based on the previous literature, it is likely that there are between-patient differences in these intrinsic factors, ie. the host response to metal debris is individual.

Electronic supplementary material

The online version of this article (10.1186/s12891-019-2578-0) contains supplementary material, which is available to authorized users.

Differential Effect of Cobalt and Chromium Ions as Well as CoCr Particles on the Expression of Osteogenic Markers and Osteoblast Function

The balance of bone formation and resorption is the result of a regulated crosstalk between osteoblasts, osteoclasts, and osteocytes. Inflammation, mechanical load, and external stimuli modulate this system. Exposure of bone cells to metal ions or wear particles are thought to cause osteolysis via activation of osteoclasts and inhibition of osteoblast activity. Co²⁺ ions have been shown to impair osteoblast function and the expression of the three transforming growth factor (TGF)-β isoforms. The current study was performed to analyze how Co²⁺ and Cr³⁺ influence the expression, proliferation, and migration profile of osteoblast-like cells. The influence of Co²⁺, Cr³⁺, and CoCr particles on gene expression was analyzed using an osteogenesis PCR Array. The expression of different members of the TGF-β signaling cascade were down-regulated by Co²⁺, as well as several TGF-β regulated collagens, however, Cr³⁺ had no effect. CoCr particles partially affected similar genes as the Co²⁺treatment. Total collagen production of Co²⁺ treated osteoblasts was reduced, which can be explained by the reduced expression levels of various collagens. While proliferation of MG63 cells appears unaffected by Co²⁺, the migration capacity was impaired. Our data may improve the knowledge of changes in gene expression patterns, and the proliferation and migration effects caused by artificial materials.

Biological Impact of Silicon Nitride for Orthopaedic Applications: Role of Particle Size, Surface Composition and Donor Variation

The adverse biological impact of orthopaedic wear debris currently limits the long-term safety of human joint replacement devices. We investigated the role of particle size, surface composition and donor variation in influencing the biological impact of silicon nitride as a bioceramic for orthopaedic applications. Silicon nitride particles were compared to the other commonly used orthopaedic biomaterials (e.g. cobalt-chromium and Ti-6Al-4V alloys). A novel biological evaluation platform was developed to simultaneously evaluate cytotoxicity, inflammatory cytokine release, oxidative stress, and genotoxicity potential of particles using peripheral blood mononuclear cells (PBMNCs) from individual human donors. Irrespective of the particle size, silicon nitride did not cause any adverse responses whereas cobalt-chromium wear particles caused donor-dependent cytotoxicity, TNF-α cytokine release, oxidative stress, and DNA damage in PBMNCs after 24 h. Despite being similar in size and morphology, silicon dioxide nanoparticles caused the release of significantly higher levels of TNF-α compared to silicon nitride nanoparticles, suggesting that surface composition influences the inflammatory response in PBMNCs. Ti-6Al-4V wear particles also released significantly elevated levels of TNF-α cytokine in one of the donors. This study demonstrated that silicon nitride is an attractive orthopaedic biomaterial due to its minimal biological impact on human PBMNCs.

Association between periprosthetic tissue metal content, whole blood and synovial fluid metal ion levels and histopathological findings in patients with failed metal-on-metal hip replacement

Adverse Reaction to Metal Debris (ARMD) is a major cause of implant failure leading to revision surgery in patients with metal-on-metal (MoM) hip arthroplasties. However, the pathogenesis and its association to implant wear are poorly understood and previous studies have yielded discrepant results. We sought to investigate the associations between histological findings, whole blood and synovial fluid metal ion concentrations and periprosthetic tissue metal concentrations in patients with MoM total hip replacements and hip resurfacings revised for ARMD. 107 hips in total were included in our study. Of these, 87 were total hip replacements and 20 were hip resurfacings, respectively. We found that whole blood, synovial fluid and periprosthetic tissue metal concentrations correlated poorly with histological findings. We suggest that the lack of a clear association between histological findings and wear measures in the present study as well as in previous studies is mostly influenced by variability in patient susceptibility. However, patients presenting with perivascular lymphocytic infiltration had lower chromium concentration in their periprosthetic tissues than patients with no perivascular lymphocytic infiltration. This may reflect the role of metal hypersensitivity in implant failure in these patients. Patients with total hip replacements evinced more necrosis and lymphocytic infiltration in their tissues than patients with hip resurfacings. This suggests that trunnion wear debris is more cytotoxic and/or immunogenic than bearing wear debris leading to higher failure rates seen in patients with total hip replacements.

Five Hundred Fifty-five Retrieved Metal-on-metal Hip Replacements of a Single Design Show a Wide Range of Wear, Surface Features, and Histopathologic Reactions

BACKGROUND

In 2010, a widely used metal-on-metal hip implant design was voluntarily recalled by the manufacturer because of higher than anticipated failure rates at 5 years. Although there was a large published range of revision rates, numerous studies had reported a higher risk of revision for excessive wear and associated adverse tissue reactions when compared with other metal-on-metal total hips. The reasons for this were suggested by some to be related to cup design features.

QUESTIONS/PURPOSES

From retrievals of ASR metal-on-metal implants and tissue samples obtained at revision surgery, we asked the following questions: (1) What were the common and uncommon surface features? (2) What were the common and uncommon linear and volumetric wear characteristics? (3) Were there common taper corrosion characteristics? (4) What aseptic lymphocytic vasculitis-associated lesion (ALVAL) features were present in the tissues?

METHODS

Five hundred fifty-five ASRs, including 23 resurfacings, were studied at one academic research center. Features of wear (eg, light and moderate scratching), damage (eg, deposits, gouges), and bone attachment on the porous coating were semiquantitatively ranked from 0 (none) to 3 (> 75%) based on the amount of a feature in each region of interest by the same experienced observer throughout the study. Visible features of head taper corrosion were ranked (Goldberg score) from 1 (none) to 4 (severe) by the same observer using a previously published scoring method. An experienced tribologist measured component wear depth using a coordinate measuring machine and quantified wear volume using previously validated methods. All available tissues were sampled and examined for features of ALVAL and scored from 0 to 10 by a single observer using a method they previously developed and published. A score from 0 to 4 is considered low, 5 to 8 is considered moderate, and 9 or 10 is considered high with regard to the risk of metal hypersensitivity features in the tissues.

RESULTS

The most common bearing surface features were light and moderate scratches and removal or postremoval damage. Discoloration and deposits were commonly observed on femoral heads (55% [305 of 553]) and less commonly on cups (30% [165 of 546]). There was no evidence of impingement or dislocation damage. There was typically a small amount of bone attachment in at least one of eight designated regions of interest (84% [460 of 546]); extensive or no bone attachment was uncommon. Edge wear was highly prevalent. The maximum wear of 469 cups (88%) occurred near the edge, whereas the maximum wear of 508 femoral heads (94%) occurred between the pole and 45° from the pole. The median combined head-cup wear volume was 14 mm (range, 1-636 mm). One hundred sixty-nine pairs (32%) had a combined wear volume of < 10 mm, 42 pairs (8%) had volumetric wear of > 100 mm, and 319 pairs (60%) had wear volume between 10 and 100 mm³. Seventy-four percent of tapers (390 of 530) received a Goldberg score of 4, 22% (116 of 530) a score of 3, < 5% (24 of 530) a score of 2, and none received a score of 1. The most frequent ALVAL score was 5 out of 10 (35 of 144 hips [24%]) and ranged from 2 (one hip) to 10 (nine hips); 92 of 144 (64%) had a moderate score, 17 of 144 (12%) had a high score, and 35 (24%) had a low score.

CONCLUSIONS

Although edge wear was prevalent, in most cases, this was not associated with high wear. The increased diameter and decreased coverage angle of the ASR design may have resulted in the observed high incidence of edge wear while perhaps decreasing the risk for impingement and dislocation.

CLINICAL RELEVANCE

The role of bearing wear in the revisions of metal-on-metal implants is controversial, because it is known that there is a large range of in vivo wear rates even within the same implant type and that patient variability affects local tissue responses to wear debris. The observations from our study of 555 retrieved ASR implant sets indicate that there was a wide range of wear including a subset with very high wear. The results suggested that the failure of the ASR and ASR XL was multifactorial, and the failure of different subgroups such as those with low wear may be the result of mechanisms other than reaction to wear debris.

Analysis of bearing wear, whole blood and synovial fluid metal ion concentrations and histopathological findings in patients with failed ASR hip resurfacings

BACKGROUND

Adverse Reaction to Metal Debris (ARMD) is still a major reason for revision surgeries in patients with metal-on-metal (MoM) hip replacements. ARMD consists of a wide range of alterations in periprosthetic tissues, most important of which are metallosis, inflammation, pseudotumors and necrosis. Studies investigating histopathological findings and their association to implant wear or indirect measures of wear have yielded inconsistent results. Therefore, we aimed to investigate bearing surface wear volume, whole blood and synovial fluid metal ion concentrations, histopathological findings in periprosthetic tissues and their associations.

METHODS

Seventy-eight patients with 85 hips revised for ARMD were included in the study. Prior to revision surgery, all patients had whole blood chromium and cobalt ion levels assessed. In revision surgery, a synovial fluid sample was taken and analyzed for chromium and cobalt. Periprosthetic tissue samples were taken and analyzed for histopathological findings. Explanted implants were analyzed for bearing wear volume of both acetabular cup and femoral head components.

RESULTS

Volumetric wear of the failed components was highly variable. The total wear volume of the head and cup had a strong correlation with whole blood chromium and cobalt ion concentrations (Cr: ρ = 0.80, p < 0.001 and Co: ρ = 0.84, p < 0.001) and a bit weaker correlation with fluid chromium and cobalt ion concentrations (Cr: ρ = 0.50, p < 0.01 and Co: ρ = 0.41, p = 0.027). Most tissues displayed only low-to-moderate amounts of macrophages and lymphocytes. Total wear volume correlated with macrophage sheet thickness (ρ = 0.25, p = 0.020) and necrosis (ρ = 0.35, p < 0.01). Whole blood chromium and cobalt ion concentrations had similar correlations. Lymphocyte cuff thickness did not correlate with either total wear volume or whole blood metal ion concentrations, but correlated with the grade of necrosis.

CONCLUSIONS

Bearing wear volume correlated with blood metal ion levels and the degree of necrosis and macrophage infiltration in periprosthetic tissues suggesting a dose-response relationship. Whole blood metal ion levels are a useful tool for clinician to estimate bearing wear and subsequent tissue response.

Intraoperative fluoroscopy with a direct anterior approach reduces variation in acetabular cup abduction angle

INTRODUCTION

The purpose of this study was to compare acetabular cup position for 2 cohorts of total hip arthroplasty (THA) patients who had a direct anterior approach.

METHODS

100 THA cases were performed with an anterior approach using intraoperative fluoroscopy (IF) to aid in cup positioning. Another group of 100 cases underwent THA with an anterior approach without the use of any fluoroscopy. Postoperative abduction and anteversion angles were measured using Martell's hip analysis software.

RESULTS

Mean abduction angle was 43.2° (standard deviation (SD) = 4.5°) for the IF group versus 37.5°(SD = 7.4°) for cases without IF (p<0.001). 18% more cases with IF fell within the Lewinnek safe zone (p<0.001); however, a similar number of cases had over 50° of abduction. The mean anteversion angles of the two groups were also significantly different (IF 21.8° vs. 24.9°) (p<0.01).

CONCLUSIONS

There was significantly less variation in cup position among the cases using IF with regards to abduction.

Interventions for Improving Hip Resurfacing Outcomes in Women: A High-Volume, Retrospective Study

BACKGROUND

Women seeking surgical intervention for their hip disorders will often find total hip arthroplasty (THA) presented as their only option. THA, when compared with hip resurfacing arthroplasty, removes substantially more bone-stock, limits range-of-motion, exhibits increased dislocation risk, and presents greater overall 10-year mortality rate. Despite these risks, most surgeons continue to select against women for hip resurfacing because registries notoriously report inferior survivorship when compared with men and THA.

METHODS

We investigated the reasons for why resurfacing arthroplasty devices survive poorly in women to develop interventions which might improve hip resurfacing outcomes in women. Using these findings, we developed a series of surgical interventions to treat the underlying issues. Herein, we compare 2 study groups: women who received hip resurfacings before (group 1) and after (group 2) these interventions.

RESULTS

Eight-year implant survivorship substantially improved from 89.6% for group 1 to 97.7% for group 2. Adverse wear-related failure, femoral component loosening, and acetabular component loosening were all significantly reduced in group 2, which we attribute to the implementation of our relative acetabular inclination limit guidelines, use of uncemented femoral fixation, and selection of the Tri-Spike acetabular component for supplemental fixation, respectively. Kaplan-Meier implant survivorship curves, grouped into 2-year time intervals, show that the disparity in failure rates between men and women is diminishing.

CONCLUSION

When experienced surgeons use refined and proper surgical technique, women show promise as excellent candidates for hip resurfacing as an alternative treatment for their debilitating hip conditions.

Taper Failure After Large-Diameter Metal-on-Metal Total Hip Arthroplasty

The use of metal-on-metal bearing surfaces for total hip arthroplasty increased dramatically in the past decade for a variety of reasons, including the advantage of using larger-diameter femoral heads to reduce instability. However, recent research suggesting negative outcomes and high failure rates associated with some of these implants has decreased their use. Further, the use of larger-diameter femoral heads on relatively small femoral neck tapers has caused concern about localized corrosion at this junction, particularly with varus femoral alignment and longer femoral neck and head lengths. Although the advent of modular components offers the surgeon greater intraoperative flexibility, this modularity may prove to be a weak link when coupled with large-diameter femoral heads. This report describes a patient with a history of bilateral metal-on-metal total hip arthroplasty complicated by failure of the right hip as a result of fretting and mechanically assisted crevice corrosion. Notching of the femoral neck and head dissociation occurred 10 years after the primary procedure. The authors describe the patient's presenting symptoms, the possible etiology of the catastrophic failure, and the method of treatment and provide a brief review of metal-on-metal implants that may shed some light on the complications in this case. [Orthopedics.2016; 39(5):e984-e987.].

Do patients with a failed metal-on-metal hip implant with a pseudotumor present differences in their peripheral blood lymphocyte subpopulations?

BACKGROUND

Early adverse tissue reactions around metal-on-metal (MoM) hip replacements, especially pseudotumors, are a major concern. Because the causes and pathomechanisms of these pseudotumors remain largely unknown, clinical monitoring of patients with MoM bearings is challenging.

QUESTIONS/PURPOSES

The purpose of this study was to compare the lymphocyte subpopulations in peripheral blood from patients with a failed MoM hip implant with and without a pseudotumor and patients with a well-functioning MoM hip implant without a pseudotumor. Potential differences in the systemic immune response are expected to reflect local differences in the periprosthetic tissues.

METHODS

Consenting patients who underwent a revision of a failed MoM hip implant at The Ottawa Hospital (TOH) from 2011 to 2014, or presented with a well-functioning MoM hip implant for a postoperative clinical followup at TOH from 2012 to 2013, were recruited for this study, unless they met any of the exclusion criteria (including diagnosed conditions that can affect peripheral blood lymphocyte subpopulations). Patients with a failed implant were divided into two groups: those with a pseudotumor (two hip resurfacings and five total hip arthroplasties [THAs]) and those without a pseudotumor (10 hip resurfacings and two THAs). Patients with a well-functioning MoM hip implant (nine resurfacings and three THAs) at 5 or more years postimplantation and who did not have a pseudotumor as demonstrated sonographically served as the control group. Peripheral blood subpopulations of T cells (specifically T helper [Th] and cytotoxic T [Tc]), B cells, natural killer (NK) cells, memory T and B cells as well as type 1 (expressing interferon-γ) and type 2 (expressing interleukin-4) Th and Tc cells were analyzed by flow cytometry after immunostaining. Serum concentrations of cobalt and chromium were measured by inductively coupled plasma-mass spectrometry.

RESULTS

The mean percentages of total memory T cells and, specifically, memory Th and memory Tc cells were lower in patients with a failed MoM hip implant with a pseudotumor than in both patients with a failed implant without a pseudotumor and patients with a well-functioning implant without a pseudotumor (memory Th cells: 29% ± 5% [means ± SD] versus 55% ± 17%, d = 1.8, 95% confidence interval [CI] [1.2, 2.5] and versus 48% ± 14%, d = 1.6, 95% CI [1.0, 2.2], respectively; memory Tc cells: 18% ± 5% versus 45% ± 14%, d = 2.3, 95% CI [1.5, 3.1] and versus 41% ± 12%, d = 2.3, 95% CI [1.5, 3.1], respectively; p < 0.001 in all cases). The mean percentage of memory B cells was also lower in patients with a failed MoM hip implant with a pseudotumor than in patients with a well-functioning implant without a pseudotumor (12% ± 8% versus 29% ± 16%, d = 1.3, 95% CI [0.7, 1.8], p = 0.025). In addition, patients with a failed MoM hip implant with a pseudotumor had overall lower percentages of type 1 Th cells than both patients with a failed implant without a pseudotumor and patients with a well-functioning implant without a pseudotumor (5.5% [4.9%-5.8%] [median with interquartile range] versus 8.7% [6.5%-10.2%], d = 1.4, 95% CI [0.8, 2.0] and versus 9.6% [6.4%-11.1%], d = 1.6, 95% CI [1.0, 2.2], respectively; p ≤ 0.010 in both cases). Finally, serum cobalt concentrations in patients with a failed MoM hip implant with a pseudotumor were overall higher than those in patients with a well-functioning implant without a pseudotumor (5.8 µg/L [2.9-17.0 µg/L] versus 0.9 µg/L [0.6-1.3 µg/L], d = 2.2, 95% CI [1.4, 2.9], p < 0.001).

CONCLUSIONS

Overall, results suggest the presence of a type IV hypersensitivity reaction, with a predominance of type 1 Th cells, in patients with a failed MoM hip implant with a pseudotumor.

CLINICAL RELEVANCE

The lower percentages of memory T cells (specifically Th and Tc) as well as type 1 Th cells in peripheral blood of patients with a failed MoM hip implant with a pseudotumor could potentially become diagnostic biomarkers for the detection of pseudotumors. Although implant design (hip resurfacing or THA) did not seem to affect the results, as suggested by the scatter of the data with respect to this parameter, future studies with additional patients could include the analysis of implant design in addition to correlations with histological analyses of specific Th subsets in periprosthetic tissues.

Total hip replacement and surface replacement for the treatment of pain and disability resulting from end-stage arthritis of the hip (review of technology appraisal guidance 2 and 44): systematic review and economic evaluation

BACKGROUND

Total hip replacement (THR) involves the replacement of a damaged hip joint with an artificial hip prosthesis. Resurfacing arthroplasty (RS) involves replacement of the joint surface of the femoral head with a metal surface covering.

OBJECTIVES

To undertake clinical effectiveness and cost-effectiveness analysis of different types of THR and RS for the treatment of pain and disability in people with end-stage arthritis of the hip, in particular to compare the clinical effectiveness and cost-effectiveness of (1) different types of primary THR and RS for people in whom both procedures are suitable and (2) different types of primary THR for people who are not suitable for hip RS.

DATA SOURCES

Electronic databases including MEDLINE, EMBASE, The Cochrane Library, Current Controlled Trials and UK Clinical Research Network (UKCRN) Portfolio Database were searched in December 2012, with searches limited to publications from 2008 and sample sizes of ≥ 100 participants. Reference lists and websites of manufacturers and professional organisations were also screened.

REVIEW METHODS

Systematic reviews of the literature were undertaken to appraise the clinical effectiveness and cost-effectiveness of different types of THR and RS for people with end-stage arthritis of the hip. Included randomised controlled trials (RCTs) and systematic reviews were data extracted and risk of bias and methodological quality were independently assessed by two reviewers using the Cochrane Collaboration risk of bias tool and the Assessment of Multiple Systematic Reviews (AMSTAR) tool. A Markov multistate model was developed for the economic evaluation of the technologies. Sensitivity analyses stratified by sex and controlled for age were carried out to assess the robustness of the results.

RESULTS

A total of 2469 records were screened of which 37 were included, representing 16 RCTs and eight systematic reviews. The mean post-THR Harris Hip Score measured at different follow-up times (from 6 months to 10 years) did not differ between THR groups, including between cross-linked polyethylene and traditional polyethylene cup liners (pooled mean difference 2.29, 95% confidence interval -0.88 to 5.45). Five systematic reviews reported evidence on different types of THR (cemented vs. cementless cup fixation and implant articulation materials) but these reviews were inconclusive. Eleven cost-effectiveness studies were included; four provided relevant cost and utility data for the model. Thirty registry studies were included, with no studies reporting better implant survival for RS than for all types of THR. For all analyses, mean costs for RS were higher than those for THR and mean quality-adjusted life-years (QALYs) were lower. The incremental cost-effectiveness ratio for RS was dominated by THR, that is, THR was cheaper and more effective than RS (for a lifetime horizon in the base-case analysis, the incremental cost of RS was £11,284 and the incremental QALYs were -0.0879). For all age and sex groups RS remained clearly dominated by THR. Cost-effectiveness acceptability curves showed that, for all patients, THR was almost 100% cost-effective at any willingness-to-pay level. There were age and sex differences in the populations with different types of THR and variations in revision rates (from 1.6% to 3.5% at 9 years). For the base-case analysis, for all age and sex groups and a lifetime horizon, mean costs for category E (cemented components with a polyethylene-on-ceramic articulation) were slightly lower and mean QALYs for category E were slightly higher than those for all other THR categories in both deterministic and probabilistic analyses. Hence, category E dominated the other four categories. Sensitivity analysis using an age- and sex-adjusted log-normal model demonstrated that, over a lifetime horizon and at a willingness-to-pay threshold of £20,000 per QALY, categories A and E were equally likely (50%) to be cost-effective.

LIMITATIONS

A large proportion of the included studies were inconclusive because of poor reporting, missing data, inconsistent results and/or great uncertainty in the treatment effect estimates. This warrants cautious interpretation of the findings. The evidence on complications was scarce, which may be because of the absence or rarity of these events or because of under-reporting. The poor reporting meant that it was not possible to explore contextual factors that might have influenced study results and also reduced the applicability of the findings to routine clinical practice in the UK. The scope of the review was limited to evidence published in English in 2008 or later, which could be interpreted as a weakness; however, systematic reviews would provide summary evidence for studies published before 2008.

CONCLUSIONS

Compared with THR, revision rates for RS were higher, mean costs for RS were higher and mean QALYs gained were lower; RS was dominated by THR. Similar results were obtained in the deterministic and probabilistic analyses and for all age and sex groups THR was almost 100% cost-effective at any willingness-to-pay level. Revision rates for all types of THR were low. Category A THR (cemented components with a polyethylene-on-metal articulation) was more cost-effective for older age groups. However, across all age-sex groups combined, the mean cost for category E THR (cemented components with a polyethylene-on-ceramic articulation) was slightly lower and the mean QALYs gained were slightly higher. Category E therefore dominated the other four categories. Certain types of THR appeared to confer some benefit, including larger femoral head sizes, use of a cemented cup, use of a cross-linked polyethylene cup liner and a ceramic-on-ceramic as opposed to a metal-on-polyethylene articulation. Further RCTs with long-term follow-up are needed.

STUDY REGISTRATION

This study is registered as PROSPERO CRD42013003924.

FUNDING

The National Institute for Health Research Health Technology Assessment programme.

Histological characterization of periprosthetic tissue responses for metal-on-metal hip replacement

The histology of periprosthetic tissue from metal-on-metal (MOM) hip devices has been characterized using a variety of methods. The purpose of this study was to compare and evaluate the suitability of two previously developed aseptic lymphocyte-dominated vasculitis-associated lesions (ALVAL) scoring systems for periprosthetic hip tissue responses retrieved from MOM total hip replacement (THR) systems revised for loosening. Two ALVAL scoring systems (Campbell and Oxford) were used to perform histological analyses of soft tissues from 17 failed MOM THRs. The predominant reactions for this patient cohort were macrophage infiltration and necrosis, with less than half of the patients (41%) showing a significant lymphocytic response or a high ALVAL reaction (6%). Other morphological changes varied among patients and included hemosiderin accumulation, cartilage formation, and heterotopic ossification. Both scoring systems are useful for correlating macrophage and lymphocyte responses and for comparison with the other; however, given the diversity and variability of the current responses, the Oxford-ALVAL system is more suitable for scoring tissues from MOM THR patients revised for loosening. It is important that standardized methods of scoring MOM tissue responses be used consistently so multiple study results can be compared and a consensus can be generated.

The 2014 Frank Stinchfield Award: The 'landing zone' for wear and stability in total hip arthroplasty is smaller than we thought: a computational analysis

BACKGROUND

Positioning of total hip bearings involves tradeoffs, because cup orientations most favorable in terms of stability are not necessarily ideal in terms of reduction of contact stress and wear potential. Previous studies and models have not addressed these potentially competing considerations for optimal total hip arthroplasty (THA) function.

QUESTIONS/PURPOSES

We therefore asked if component positioning in total hips could be addressed in terms of balancing bearing surface wear and stability. Specifically, we sought to identify acetabular component inclination and anteversion orientation, which simultaneously resulted in minimal wear while maximizing construct stability, for several permutations of femoral head diameter and femoral stem anteversion.

METHODS

A validated metal-on-metal THA finite element (FE) model was used in this investigation. Five dislocation-prone motions as well as gait were considered as were permutations of femoral anteversion (0°-30°), femoral head diameter (32-48 mm), cup inclination (25°-75°), and cup anteversion (0°-50°), resulting in 4320 distinct FE simulations. A novel metric was developed to identify a range of favorable cup orientations (so-called "landing zone") by considering both surface wear and component stability.

RESULTS

When considering both wear and stability with equal weight, ideal cup position was more restrictive than the historically defined safe zone and was substantially more sensitive to cup anteversion than to inclination. Ideal acetabular positioning varied with both femoral head diameter and femoral version. In general, ideal cup inclination decreased with increased head diameter (approximately 0.5° per millimeter increase in head diameter). Additionally, ideal inclination increased with increased values of femoral anteversion (approximately 0.3° per degree increase in stem anteversion). Conversely, ideal cup anteversion increased with increased femoral head diameter (0.3° per millimeter increase) and decreased with increased femoral stem anteversion (approximately 0.3° per degree increase). Regressions demonstrated strong correlations between optimal cup inclination versus head diameter (Pearson's r=-0.88), between optimal cup inclination versus femoral anteversion (r=0.96), between optimal cup anteversion versus head diameter (r=0.99), and between optimal cup anteversion and femoral anteversion (r=-0.98). For a 36-mm cup with a 20° anteverted stem, the ideal cup orientation was 46°±12° inclination and 15°±4° anteversion.

CONCLUSIONS

The range of cup orientations that maximized stability and minimized wear (so-called "landing zone") was substantially smaller than historical guidelines and specifically did not increase with increased head size, challenging the presumption that larger heads are more forgiving. In particular, when the cup is oriented to improve not only stability, but also wear in the model, there was little or no added stability achieved by the use of larger femoral heads. Additionally, ideal cup positioning was more sensitive to cup anteversion than to inclination.

CLINICAL RELEVANCE

Positioning THA bearings involves tradeoffs regarding stability and long-term bearing wear. Cup positions most favorable to minimization of wear such as low inclination and elevated anteversion were detrimental in terms of construct stability. Orientations were identified that best balanced the competing considerations of wear and stability.

Can wear explain the histological variation around metal-on-metal total hips?

BACKGROUND

There is a general perception that adverse local tissue reactions in metal-on-metal hip arthroplasties are caused by wear, but the degree to which this is the case remains controversial.

QUESTIONS/PURPOSES

To what extent is the magnitude of wear associated with (1) the histological changes; (2) presence of metallosis; and (3) likelihood of pseudotumor formation in the periprosthetic tissues?

METHODS

One hundred nineteen metal-on-metal total hip arthroplasties and hip resurfacings were selected from a retrieval collection of over 500 implants (collected between 2004 and 2012) based on the availability of periprosthetic tissues collected during revision, clinical data including presence or absence of pseudotumor or metallosis observed intraoperatively, and wear depth measured using a coordinate measurement machine. Histological features of tissues were scored for aseptic lymphocytic vasculitis-associated lesions (ALVAL). Correlation analysis was performed on the three endpoints of interest.

RESULTS

With the sample size available, no association was found between wear magnitude and ALVAL score (ρ=-0.092, p=0.423). Median wear depth (ball and cup) was greater in hips with metallosis (137 μm; range, 8-873 μm) than in those without (18 μm; range, 8-174 μm; p<0.0001). With the numbers available, no statistically significant association between wear depth and pseudotumor formation could be identified; median wear depth was 74 μm in hips with pseudotumors and 26 μm in those without (p=0.741).

CONCLUSIONS

Wear alone did not explain the histopathological changes in the periprosthetic tissues. A larger sample size and more sensitive outcome variable assessments may have revealed a correlation. However, wear depth has been inconsistently associated with pseudotumor formation, perhaps because some patients with hypersensitivity may develop pseudotumors despite low wear.

CLINICAL RELEVANCE

Metal wear alone may not explain the histological reactions and pseudotumors around metal-on-metal hip implants.

Do retrieval analysis and blood metal measurements contribute to our understanding of adverse local tissue reactions?

BACKGROUND

Metal-on-metal (MoM) total hip arthroplasties (THAs) and the head-neck and neck-body junctions in modular THA are associated with a variety of local and systemic reactions to their related wear and corrosion products. Although laboratory testing is available, the relationship between laboratory values--including serum metal ion levels--and adverse local tissue reactions (ALTRs) remains controversial and incompletely characterized.

QUESTIONS/PURPOSES

(1) What is the range of serum metal levels associated with ALTR in patients who have MoM THAs or corrosion at the head-neck and neck-body junctions in metal-on-polyethylene (or ceramic-on-polyethylene) THAs? (2) How much wear occurs in patients with MoM total hips? (3) Is there evidence of a dose-response relationship between wear and ALTR?

METHODS

PubMed and Embase databases were reviewed for English-language studies assessing serum metal levels in the presence of ALTR and papers describing the results of wear measurements from revised MoM implants and ALTR histopathology were systematically reviewed. Reported linear wear data were separated into groups with ALTR and without ALTR as listed in individual papers and graphed to determine whether a dose-response relationship was present between wear and ALTR. Overall, 15 studies including 338 hips with ALTR with corresponding serum metal levels were identified and analyzed. Twelve studies reported the wear depth or volume of MoM components from patients with a variety of local reactions. Two studies investigated corrosion at the head-neck and neck-body junctions in metal-on-polyethylene THA. There was a high level of variability and study heterogeneity, and so data pooling (meta-analysis) could not be performed.

RESULTS

Average reported metal concentrations were elevated above established normal values in patients with ALTR (cobalt concentrations ranged from 5 to 40 ppb, and chromium levels ranged from 5 to 54 ppb). Whereas several studies demonstrated that patients with ALTR had higher average linear wear of the bearing surfaces, this finding was not made in all studies that we identified in this systematic review. Because of this high degree of variability, no clear dose-response relationship between wear and ALTR could be established.

CONCLUSIONS

Serum metal level analysis and implant retrieval analysis both contribute to the understanding of ALTR. Serum metal levels generally are elevated in the presence of ALTR but should not be used in isolation for clinical decision-making. Many but not all patients with ALTR, including those with pseudotumors, demonstrate high wear, but more data and more systematic descriptions of the histopathology are needed to define the amount of wear that induces adverse reactions.

A lexicon for wear of metal-on-metal hip prostheses

Research on metal-on-metal (MoM) hip bearings has generated an extensive vocabulary to describe the wear processes and resultant surface damage. However, a lack of consistency and some redundancy exist in the current terminology. To facilitate the understanding of MoM tribology and to enhance communication of results among researchers and clinicians, we propose four categories of wear terminology: wear modes refer to the in vivo conditions under which the wear occurred; wear mechanisms refer to fundamental wear processes (adhesion, abrasion, fatigue, and tribochemical reactions); wear damage refers to the resultant changes in the morphology and/or composition of the surfaces; and wear features refer to the specific wear phenomena that are described in terms of the relevant modes, mechanisms, and damage. Clarifying examples are presented, but it is expected that terms will be added to the lexicon as new mechanisms and types of damage are identified. Corrosion refers to electrochemical processes that can remove or add material and thus also generate damage. Corrosion can act alone or may interact with mechanical wear. Examples of corrosion damage are also presented. However, an in-depth discussion of the many types of corrosion and their effects is beyond the scope of the present wear lexicon.

Long-term outcome of a metal-on-polyethylene cementless hip resurfacing

Due to the well-documented problems surrounding metal-on-metal bearings, the use of hip resurfacing has declined. Since the potential benefits of hip resurfacing remain desirable, it may be beneficial to investigate the long-term outcome of hip resurfacings using metal-on-polyethylene in the 1980's. We report the long-term survivorship and modes of failure of a cementless metal-on-polyethylene resurfacing (n = 178) with different porous ingrowth surfaces. While acetabular loosening was absent, a high incidence of femoral failures (femoral loosening = 18.1%, osteolytic neck fracture = 21%) occurred despite using the same ingrowth surface for both components. Ongoing developments using the lessons learned from these previous generation components and utilizing modern low wear materials, e.g., cross-linked polyethylene, may lead to improved implants for future hip resurfacings.

Practical considerations for volumetric wear analysis of explanted hip arthroplasties

OBJECTIVES

Wear debris released from bearing surfaces has been shown to provoke negative immune responses in the recipient. Excessive wear has been linked to early failure of prostheses. Analysis using coordinate measuring machines (CMMs) can provide estimates of total volumetric material loss of explanted prostheses and can help to understand device failure. The accuracy of volumetric testing has been debated, with some investigators stating that only protocols involving hundreds of thousands of measurement points are sufficient. We looked to examine this assumption and to apply the findings to the clinical arena.

METHODS

We examined the effects on the calculated material loss from a ceramic femoral head when different CMM scanning parameters were used. Calculated wear volumes were compared with gold standard gravimetric tests in a blinded study.

RESULTS

Various scanning parameters including point pitch, maximum point to point distance, the number of scanning contours or the total number of points had no clinically relevant effect on volumetric wear calculations. Gravimetric testing showed that material loss can be calculated to provide clinically relevant degrees of accuracy.

CONCLUSIONS

Prosthetic surfaces can be analysed accurately and rapidly with currently available technologies. Given these results, we believe that routine analysis of explanted hip components would be a feasible and logical extension to National Joint Registries. Cite this article: Bone Joint Res 2014;3:60-8.

Surface Characterization of Retrieved Metal-on-Metal Total Hip Implants from Patients with Adverse Reaction to Metal Debris

The use of metal-on-metal (MoM) total hip implants has decreased recently due to reports of high failure rates and adverse local tissue reaction (ALTR). It has been hypothesized that wear metal debris released from CoCr bearing surfaces may provoke delayed hypersensitivity reactions. The goal of this study is to evaluate the microscopic bearing surface characteristics of implants revised due to evidence of ALTR. The bearing surface of each head and cup was analyzed using multiple microscopy techniques for characterization of the surface features. The presence of severe mechanical scratching was a common characteristic found in all of the implants evaluated. Mechanical factors seemed to be the prevalent failure mode related to the appearance of ALTR with this particular set of retrieved implants.

Accuracy of methods for calculating volumetric wear from coordinate measuring machine data of retrieved metal-on-metal hip joint implants

This study compared the accuracy and sensitivity of several numerical methods employing spherical or plane triangles for calculating the volumetric wear of retrieved metal-on-metal hip joint implants from coordinate measuring machine measurements. Five methods, one using spherical triangles and four using plane triangles to represent the bearing and the best-fit surfaces, were assessed and compared on a perfect hemisphere model and a hemi-ellipsoid model (i.e. unworn models), computer-generated wear models and wear-tested femoral balls, with point spacings of 0.5, 1, 2 and 3 mm. The results showed that the algorithm (Method 1) employing spherical triangles to represent the bearing surface and to scale the mesh to the best-fit surfaces produced adequate accuracy for the wear volume with point spacings of 0.5, 1, 2 and 3 mm. The algorithms (Methods 2-4) using plane triangles to represent the bearing surface and to scale the mesh to the best-fit surface also produced accuracies that were comparable to that with spherical triangles. In contrast, if the bearing surface was represented with a mesh of plane triangles and the best-fit surface was taken as a smooth surface without discretization (Method 5), the algorithm produced much lower accuracy with a point spacing of 0.5 mm than Methods 1-4 with a point spacing of 3 mm.

What causes unexplained pain in patients with metal-on metal hip devices? A retrieval, histologic, and imaging analysis

BACKGROUND

Adverse tissue reactions associated with metal-on-metal (MOM) hips are common in resurfacing and total hip arthroplasty (THA) designs. The etiology of these reactions in painful, well-positioned arthroplasties is inconsistently described.

QUESTIONS/PURPOSES

The purposes of this study were to compare the (1) articular wear rates; (2) histologic findings; (3) synovial response on MRI; and (4) graded intraoperative tissue damage between well-positioned, MOM hips revised for unexplained pain and MOM hips revised for other reasons and to (5) determine whether the presence of a taper junction on a MOM articulation affects these four parameters in unexplained pain.

METHODS

We retrospectively studied 88 patients (94 hips) who had undergone revision of either a hip resurfacing or a large-head (> 36 mm) THA. Thirty-five hips revised for unexplained pain were compared with a control group of 59 hips revised for other causes. Articular wear was measured using three-dimensional contactless metrology and histologic analysis was performed using the aseptic lymphocyte-dominated vasculitis-associated lesion (ALVAL) score. Preoperative MRI was performed on 57 patients to determine synovial volumes and thicknesses. Tissue damage was graded from intraoperative reports.

RESULTS

Articular wear rates in the unexplained pain group were lower than in the control group (median 2.6 μm/year versus 12.8 μm/year, p < 0.001). Sixty-six percent of patients in the unexplained pain group had histologic confirmation of ALVAL compared with 19% in the control group (p < 0.001). The synovial thickness on MRI was higher in the unexplained pain group (p = 0.04) and was highly predictive of ALVAL. Severe intraoperative tissue damage was noted in more cases in the unexplained pain group (p = 0.01). There were no differences in articular wear, histology, MRI, and tissue damage between resurfacings and THAs revised for unexplained pain.

CONCLUSIONS

Unexplained pain in patients with well-positioned MOM hips warrants further investigation with MRI to look for features predictive of ALVAL. Tissue destruction in these cases does not appear to be related to high bearing wear or the presence of a taper.

Alternative bearings in total hip arthroplasty in the young patient

Total hip arthroplasty is an effective treatment option for advanced hip arthritis in elderly patients. Studies in young patients have traditionally shown less durable results. With current implants, surgical technique, and cementless fixation methods, the durability of total hip arthroplasty may now be related to the wear performance of the bearing surfaces. To improve implant longevity, there are several bearing surface choices currently available for this demanding group of patients. Alternatives must be evaluated in terms of the risks and benefits associated with each articulation, and all new technologies must be carefully monitored over the long term.

Metal on metal total hip arthroplasty using modular acetabular shells

Metal on metal bearings were reintroduced into the United States for use in total hip arthroplasty approximately a decade ago. We evaluated a consecutive series cohort of 148 patients with 169 hips who underwent THR using a metal on metal bearing surface with a modular acetabular shell that had fixation augmentation with dome screws. At 3 to 8 year follow-up, average 4.7 years, only one component was revised (for femoral loosening). 3 hips demonstrated proximal femoral osteolysis and 3 hips demonstrated pelvic osteolysis. The average follow-up Harris Hip Score was 94 (range, 57-100). Although the results have been excellent, we continue to closely monitor these hips for any long term failures, or concerns.

Revising the well-fixed, painful resurfacing using a double-mobility head: a new strategy to address metal-on-metal complications

Isolated revision of the femoral component of hip resurfacings to metal-on-metal (MoM) total hip arthroplasties has shown inferior results. We present a case series of well-fixed, painful MoM hips with elevated chromium and cobalt levels. An isolated femoral revision using a noncemented femoral component and a double-mobility head was performed. Patients were followed up for 6 months and showed excellent improvements in visual analog score and Hip dysfunction and Osteoarthritis Outcome Score (HOOS). Cobalt and chromium levels dropped at 6 weeks and were normal at 6 months. Although our follow-up is short, we feel that it is important to highlight this as a potential treatment strategy. This revision is less aggressive than traditional methods, eliminates the concerns from MoM bearings, and results in a stable construct.

Hip arthroplasty

Total hip arthroplasty is a cost-effective surgical procedure undertaken to relieve pain and restore function to the arthritic hip joint. More than 1 million arthroplasties are done every year worldwide, and this number is projected to double within the next two decades. Symptomatic osteoarthritis is the indication for surgery in more than 90% of patients, and its incidence is increasing because of an ageing population and the obesity epidemic. Excellent functional outcomes are reported; however, careful patient selection is needed to achieve best possible results. The present economic situation in many developed countries will place increased pressure on containment of costs. Future demand for hip arthroplasty, especially in patients younger than 65 years, emphasises the need for objective outcome measures and joint registries that can track lifetime implant survivorship. New generations of bearing surfaces such as metal-on-metal, ceramic-on-ceramic, and metal-on-ceramic, and techniques such as resurfacing arthroplasty have the potential to improve outcomes and survivorship, but findings from prospective trials are needed to show efficacy. With the recall of some metal-on-metal bearings, new bearing surfaces have to be monitored carefully before they can be assumed to be better than traditional bearings.

Wear-corrosion synergism in a CoCrMo hip bearing alloy is influenced by proteins

BACKGROUND

Although numerous in vitro studies report on the tribological performance of and, separately, on the corrosion properties of cobalt-based alloys in metal-on-metal (MoM) bearings, the few studies that take into account the synergistic interaction of wear and corrosion (tribocorrosion) have used canonical tribo-test methods. We therefore developed synergistic study using a test method that more closely simulates hip bearing conditions.

QUESTIONS/PURPOSES

(1) Is the total material loss during tribocorrosion larger than the sum of its components generated during isolated mechanical wear and isolated corrosion? (2) How is the tribocorrosive process affected by the presence of protein?

METHODS

High carbon CoCrMo alloy discs (18) were subjected to corrosion and tribocorrosion tests under potentiostatic conditions in an apparatus simulating hip contact conditions. The input variables were the applied potential and the protein content of the electrolyte (NaCl solution versus bovine serum, 30 g/L protein). The output variables were mass loss resulting from wear in the absence of corrosion, mass loss resulting from corrosion in the absence of wear, and the total mass loss under tribocorrosion, from which the additional mass loss resulting from the combined action of wear and corrosion, or synergism, was determined in the presence and absence of protein.

RESULTS

The degradation mechanisms were sensitive to the interaction of wear and corrosion. The synergistic component (64 μg) in the presence of protein amounted to 34% of total material loss (187 μg). The presence of protein led to a 23% decrease in the total mass loss and to a considerable reduction in the mean current (4 μA to 0.05 μA) under tribocorrosion.

CONCLUSIONS

Synergistic effects during tribocorrosion may account for a considerable portion of MoM degradation and are affected by proteins.

CLINICAL RELEVANCE

The in vivo performance of some large-diameter MoM joints is unsatisfactory. The synergistic component resulting from tribocorrosion may have been missed in conventional preclinical wear tests.

Pseudotumors are common in well-positioned low-wearing metal-on-metal hips

BACKGROUND

Pseudotumors are sterile inflammatory lesions found in the soft tissues surrounding metal-on-metal (MOM) and metal-on-polyethylene hip arthroplasties. In patients with MOM hip arthroplasties, pseudotumors are thought to represent an adverse reaction to metal wear debris. However, the pathogenesis of these lesions remains unclear. Currently, there is inconsistent evidence regarding the influence of adverse cup position and increased wear in the formation of pseudotumors.

QUESTIONS/PURPOSES

We therefore determined whether pseudotumor formation was associated with (1) adverse cup position, (2) raised metal ion levels, and (3) increased wear rates of the retrieved components.

METHODS

We retrospectively reviewed all 352 patients for whom we had retrieved specimens from revisions of a current-generation MOM hip prosthesis between February 2008 and September 2010; of these, 105 met our inclusion criteria. We used multivariate logistic regression analysis to compare acetabular orientation, metal ion levels before revision, and component wear rates between patients with (n = 72) and without (n = 33) pseudotumors, according to findings on metal artifact reduction sequence MRI.

RESULTS

The proportion of patients demonstrating evidence of a pseudotumor in well-positioned hips was similar to those with adverse cup positions (67% and 66%, respectively). Patients revised with pseudotumors had similar whole-blood metal ion levels and component wear rates to those who were not revised.

CONCLUSIONS

Pseudotumors were not associated with increased wear or metal ion levels, suggesting patient susceptibility is likely to be more important.

Modern metal-on-metal hip implants

This Technology Overview was prepared using systematic review methodology and summarizes the findings of studies published as of July 15, 2011, on modern metal-on-metal hip implants. Analyses conducted on outcomes by two joint registries indicate that patients who receive metal-on-metal total hip arthroplasty (THA) and hip resurfacing are at greater risk for revision than are patients who receive THA using a different bearing surface combination. Data from these registries also indicate that larger femoral head components have higher revision rates and risk of revision and that older age is associated with increased revision risks of large-head metal-on-metal THA. Several studies noted a correlation between suboptimal hip implant positioning and higher wear rates, local metal debris release, and consequent local tissue reactions to metal debris. In addition, several studies reported elevated serum metal ion concentrations in patients with metal-on-metal hip articulations, although the clinical significance of these elevated ion concentrations remains unknown.

Are hip resurfacing arthroplasties meeting the needs of our patients? A 2-year follow-up study

Hip resurfacing arthroplasty (HRA) is a treatment of end-stage hip arthritis in young patients with excellent bone stock. One hundred four consecutive HRAs (Depuy ASR, Warsaw, Ind) were performed with 36-Item Short Form Health Survey (SF-36), Western Ontario and McMaster University Osteoarthritis Index, Harris Hip Scores, and University of California, Los Angeles activity ratings obtained preoperatively, at 6 months, and at 1 and 2 years postoperatively. Four patients required conversion to total hip arthroplasty. All patients showed significant improvements in their activity, pain, stiffness, and function postoperatively. Patients with lower SF-36 mental component scores (MCSs) improved their MCS compared with those of the general population, as well as improving their pain and physical functioning scores. These findings demonstrate reliable improvements in standard quality of life measures in patients undergoing HRA, including those with low preoperative SF-36 MCS.

Evaluation and treatment of painful total hip arthroplasties with modular metal taper junctions

Modern primary total hip arthroplasty femoral components have evolved to include modular necks. Subsequently, the additional taper junction provides another interface as a potential source for mechanically assisted crevice corrosion, which is a complex process involving fretting and crevice corrosion. Furthermore, it is becoming evident that an adverse local tissue reaction may result in some patients due to the mechanically assisted crevice corrosion. This article details the clinical, radiographic, and laboratory evaluation of patients with these components who present with persistent pain. The relevant surgical strategies and techniques to address this pathology in symptomatic patients are addressed.