Discerning the mechanism of the multiwalled carbon nanotubes effect on root cell water and nutrient transport

Foliar application of nano biochar solution elevates tomato productivity by counteracting the effect of salt stress insights into morphological physiological and biochemical indices

Nano-biochar considers a versatile and valuable sorbent to enhance plant productivity by improving soil environment and emerged as a novel solution for environmental remediation and sustainable agriculture in modern era. In this study, roles of foliar applied nanobiochar colloidal solution (NBS) on salt stressed tomato plants were investigated. For this purpose, NBS was applied (0%, 1% 3% and 5%) on two groups of plants (control 0 mM and salt stress 60 mM). Tween-20 was used as a surfactant to prolong NBS effective stay on plant leaf surface. The results showed that 3% NBS application effectively improved the plant height, plant biomass, fruit count and fruit weight under non-stressed and stressed plants. In addition, 3% NBS application further increased the plant pigments such as chlorophyll by 72% and 53%, carotenoids by 64% and 40%, leaf relative water content by 4.1 fold and 1.07 fold under both conditions, respectively. NBS application stabilized the plasma membrane via reducing electrolyte leakage by 30% as well as reduced the lipid peroxidation rates by 46% and 29% under non-stressed and stressed plants, respectively. 3% NBS application also significantly enhanced the plants primary and secondary metabolites, as well as activities of antioxidant enzymes compared to control plants. Overall, NBS foliar application significantly improved all growth and yield indices, pigments, primary and secondary metabolites, leaf water content, antioxidant enzyme activities as well as reduced electrolyte leakage and lipid peroxidation rates in tomato to combat stress conditions. In future, studies on nano biochar interactions with soil microbiota, surface modifications, long-term environmental impacts, reduced methane gas emissions, and biocompatibility could provide insights into optimizing its use in sustainable agriculture.

Carbon-based nanocarriers for plant growth promotion: fuelling when needed

Climate change (i.e., rising temperature and precipitation) due to global warming is affecting soil fertility, thereby significantly causing a decrease in agriculture production worldwide. At the same time, increasing demands for food supplies with the growing global population puts extra pressure to improve agricultural production. Indeed, chemical fertilizers and pesticides are a great help in fuelling agro-production, but their excess use could deteriorate the environment and human health. Nevertheless, nanomaterials, especially carbon-based nanostructured materials (CB-NMs), have revolutionized the agricultural sector in various ways including the on-demand supply of essential nutrients, biomolecules, and growth factors to plants. Carbon nanofibers (CNFs) are one such example that can be tuned to carry essential nutrients (i.e., Fe, Cu, Zn, and Mo) and deliver to plants when and what is in need. As a result, it not only improves the crop yield but also maintains the nutritional quality (protein, carbohydrate, and mineral contents) of plant products. This review discusses the most innovative development in CB-NM-based carriers (CNFs, carbon nanotubes (CNTs), and graphene as well as its derivatives) for plant growth applications including the approaches being used for their lab-scale synthesis. In addition, their application as the carrier of micronutrients and biomolecules and the successful delivery (and the underlying mechanism) of genes, nucleic acids, microbes, and their components in plants are discussed.

Plant nutrition challenges for a sustainable agriculture of the future

This article offers a comprehensive review of sustainable plant nutrition concepts, examining a multitude of cutting-edge techniques that are revolutionizing the modern area. The review copes with the crucial role of biostimulants as products that stimulate plant nutrition processes, including their potential for biofertilization, followed by an exploration of the significance of micronutrients in plant health and growth. We then delve into strategies for enhancing plants' tolerance to mineral nutrient contaminants and the promising realm of biofortification to increase the essential nutrients necessary for human health. Furthermore, this work also provides a concise overview of the burgeoning field of nanotechnologies in fertilization, while the integration of circular economy principles underscores the importance of sustainable resource management. Then, with examined the interrelation between micronutrients. We conclude with the future challenges and opportunities that lie ahead in the pursuit of more sustainable and resilient plant systems.

Carbon-based nanomaterials as inducers of biocompounds in plants: Potential risks and perspectives

Biocompounds are metabolites synthesized by plants, with clinically proven capacity in preventing and treating degenerative diseases in humans. Carbon-based nanomaterials (CNMs) are atomic structures that assume different hybridization and shape. Due to the reactive property, CNMs can induce the synthesis of metabolites, such as biocompounds in cells and various plant species, by generating reactive oxygen species (ROS). In response, plants positively or negatively regulate the expression of various families of genes and enzymes involved in physiological and metabolomic pathways of plants, such as carbon and nitrogen metabolism, which are directly involved in plant development and growth. Likewise, ROS can modulate the expression of enzymes and genes related to the adaptation of plants to stress, such as the glutathione ascorbate cycle, the shikimic acid, and phenylpropanoid pathways, from which the largest amount of biocompounds in plants are derived. This document exposes the ability of three CNMs (fullerene, graphene, and carbon nanotubes) to positively or negatively regulate the activity of enzymes and genes involved in various plant species' primary and secondary metabolism. The mechanism of action of CNMs on the production of biocompounds and the effect of the translocation of CNMs on the growth and content of primary metabolites in plants are described. Adverse effects of CNMs on plants, prospects, and possible risks involved are also discussed. The use of CNMs as inducers of biocompounds in plants could have implications and relevance for human health, crop quality, and plant adaptation and resistance to biotic and abiotic stress.

Carbon nanotubes in plant dynamics: Unravelling multifaceted roles and phytotoxic implications

Carbon nanotubes (CNTs) have emerged as a promising frontier in plant science owing to their unique physicochemical properties and versatile applications. CNTs enhance stress tolerance by improving water dynamics and nutrient uptake and activating defence mechanisms against abiotic and biotic stresses. They can be taken up by roots and translocated within the plant, impacting water retention, nutrient assimilation, and photosynthesis. CNTs have shown promise in modulating plant-microbe interactions, influencing symbiotic relationships and mitigating the detrimental effects of phytopathogens. CNTs have demonstrated the ability to modulate gene expression in plants, offering a powerful tool for targeted genetic modifications. The integration of CNTs as sensing elements in plants has opened new avenues for real-time monitoring of environmental conditions and early detection of stress-induced changes. In the realm of agrochemicals, CNTs have been explored for their potential as carriers for targeted delivery of nutrients, pesticides, and other bioactive compounds. CNTs have the potential to demonstrate phytotoxic effects, detrimentally influencing both the growth and developmental processes of plants. Phytotoxicity is characterized by induction of oxidative stress, impairment of cellular integrity, disruption of photosynthetic processes, perturbation of nutrient homeostasis, and alterations in gene expression. This review aims to provide a comprehensive overview of the current state of knowledge regarding the multifaceted roles of CNTs in plant physiology, emphasizing their potential applications and addressing the existing challenges in translating this knowledge into sustainable agricultural practices.

Enhancement of carbon nanotubes on microalgal-fungal consortium formation and wastewater treatment

As a promising material with an efficient light capture capability, a low amount of carbon nanotubes can affect growth and photosynthesis by regulating microalgal cells, thereby enhancing the pollutant removal efficiency in wastewater. In this study, microalgal-fungal consortia of Chlorella vulgaris and Ganoderma lucidum were developed with different types and concentrations of carbon nanotubes. The treatment effect of microalgal-fungal consortia on simulated digestate was also studied. The results demonstrate that 1.5 mg/L of carboxylated multi-walled carbon nanotubes remarkably promoted the formation, growth and photosynthesis of consortium. The dry weight and chlorophyll a content reached 19.3 ± 0.53 mg/symbiont and 27.3 ± 0.52 μg/L, respectively. Moreover, the removal efficiency of chemical oxygen demand, total nitrogen, total phosphorus and tetracycline hydrochloride were 94.1%, 65.5%, 61.9% and 96.2%, respectively. Overall, these findings suggest a promising future for the use of carbon nanotubes in wastewater treatment by regulating microalgal-fungal consortia.

Exposure to single-walled carbon nanotubes differentially affect in vitro germination, biochemical and antioxidant properties of Thymus daenensis celak. seedlings

Carbon nanomaterials such as single-walled carbon nanotubes (SWCNTs) offer a new possibility for phyto-nanotechnology and biotechnology to improve the quality and quantity of secondary metabolites in vitro. The current study aimed to determine the SWCNTs effects on Thyme (Thymus daenensis celak.) seed germination. The seedlings were further assessed in terms of morphological and phytochemical properties. Sterile seeds were cultured in vitro and treated with various concentrations of SWCNTs. Biochemical analyses were designed on seedling sample extracts for measuring antioxidant activities (AA), total flavonoids (TFC) and phenolic contents, and the main enzymes involved in oxidative reactions under experimental treatments. The results indicated that an increase in SWCNTs concentration can enhance the total percentage of seed germination. The improvement was observed in samples that received SWCNTs levels of up to 125 µg ml-1, even though seedling height and biomass accumulation decreased. Seedling growth parameters in the control samples were higher than those of grown in SWCNT-fortified media. This may have happened because of more oxidative damage as well as a rise in POD and PPO activities in tissues. Additionally, secondary metabolites and relevant enzyme activities showed that maximum amounts of TPC, TFC, AA and the highest PAL enzyme activity were detected in samples exposed to 62.5 µg ml-1 SWCNTs. Our findings reveal that SWCNTs in a concentration-dependent manner has different effects on T. daenensis morphological and phytochemical properties. Microscopic images analysis revealed that SWCNTs pierce cell walls, enter the plant cells and agglomerate in the cellular cytoplasm and cell walls. The findings provide insights into the regulatory mechanisms of SWCNTs on T. daenensis growth, germination and secondary metabolites production.

Carboxylic acid-functionalized multiwalled carbon nanotubes (COOH-MWCNTs) improved production of atropine in callus of Datura inoxia by influencing metabolism, gene regulation, and DNA cytosine methylation; an in vitro biological assessment

Atropine is a well-known tropane alkaloid commonly employed in medicine class called anticholinergics. This study intends to address biochemical and molecular responses of Datura inoxia calluses to fortifying culture medium with carboxylic acid-functionalized multi-walled carbon nanotubes (COOH-MWCNTs). The application of MWCNTs influenced callogenesis performance and biomass in a dose-dependent manner. The MWCNT at 5 mgL-1 resulted in the highest biomass of calluses by 57%. While, MWCNTs at high concentrations were accompanied by cytotoxicity. On the other hand, MWCNTs at concentrations above 100 mgL-1 exhibited cytotoxicity, decreased callogenesis performance, and reduced Atropine biosynthesis. The MWCNTs increased the activity of phenylalanine ammonia-lyase (PAL) and catalase enzymes. The concentrations of proline and soluble phenols displayed upward trends in response to using MWCNTs. According to the HPLC assessment, enriching culture medium with MWCNTs at 5 mgL-1 elicited Atropine production in calluses by 64%. The quantitative PCR assessment referred to the upregulation in the transcription of the PAL gene. The expression of ornithine decarboxylase (ODC) and putrescine N-methyltransferase 1 (PMT) genes were also upregulated in calluses cultured in a medium supplemented with MWCNTs. Methylation Sensitive Amplification Polymorphism (MSAP) technique indicated that employing MWCNTs altered the DNA methylation profile, reflecting epigenetic modification. Overall, engineering plant cells with MWCNTs as a nano-elicitor can be suggested for large-scale synthesis of industrially-valuable secondary metabolites.

Efficacy of Carbon Nanodots and Manganese Ferrite (MnFe2O4) Nanoparticles in Stimulating Growth and Antioxidant Activity in Drought-Stressed Maize Inbred Lines

Despite being the third most-consumed crop, maize (Zea mays L.) is highly vulnerable to drought stress. The predominant secondary metabolite in plants is phenolic acids, which scavenge reactive oxygen species to minimize oxidative stress under drought stress. Herein, the effect of carbon nanodots (CND) and manganese ferrite (MnFe2O4) nanoparticles (NP) on the drought stress tolerance of maize has been studied. The experimental results revealed that the highest leaf blade length (54.0 cm) and width (3.9 cm), root length (45.2 cm), stem diameter (11.1 mm), root fresh weight (7.0 g), leaf relative water content (84.8%) and chlorogenic (8.7 µg/mL), caffeic (3.0 µg/mL) and syringic acid (1.0 µg/mL) contents were demonstrated by CND-treated (10 mg L-1) inbred lines (GP5, HW19, HCW2, 17YS6032, HCW3, HCW4, HW7, HCW2, and 16S8068-9, respectively). However, the highest shoot length (71.5 cm), leaf moisture content (83.9%), shoot fresh weight (12.5 g), chlorophyll content (47.3), and DPPH free radical scavenging activity (34.1%) were observed in MnFe2O4 NP-treated (300 mg L-1) HF12, HW15, 11BS8016-7, HW15, HW12, and KW7 lines, respectively. The results indicate that CND and MnFe2O4 NP can mitigate drought stress effects on different accessions of the given population, as corroborated by improvements in growth and physio-biochemical traits among several inbred lines of maize.

The Impact of Gold Nanoparticles on Somatic Embryogenesis Using the Example of Arabidopsis thaliana

Although the influence of nanoparticles (NPs) on developmental processes is better understood, little is known about their impact on somatic embryogenesis (SE). This process involves changes in the direction of cell differentiation. Thus, studying the effect of NPs on SE is essential to reveal their impact on cell fate. This study aimed to examine the influence of gold nanoparticles (Au NPs) with different surface charges on the SE of 35S:BBM Arabidopsis thaliana, with particular emphasis on the spatiotemporal localization of pectic arabinogalactan proteins (AGPs) and extensin epitopes in cells changing the direction of their differentiation. The results show that under the influence of nanoparticles, the explant cells of 35S:BBM Arabidopsis thaliana seedling origin did not enter the path of SE. Bulges and the formation of organ-like structures were observed in these explants, in contrast to the control, where somatic embryos developed. Additionally, spatiotemporal changes in the chemical composition of the cell walls during the culture were observed. Under the influence of Au NPs, the following effects were observed: (1) explant cells did not enter the SE pathway, (2) the impacts of Au NPs with different surface charges on the explants were variable, and (3) the compositions of the analyzed pectic AGPs and extensin epitopes were diverse in the cells with different developmental programs: SE (control) and non-SE (treated with Au NPs).

Graphene-Cu Nanocomposites Induce Tolerance against Fusarium oxysporum, Increase Antioxidant Activity, and Decrease Stress in Tomato Plants

The tomato crop is susceptible to various types of stress, both biotic and abiotic, which affect the morphology, physiology, biochemistry, and genetic regulation of plants. Among the biotic factors, is the phytopathogen Fusarium oxysporum f. sp. lycopersici (Fol), which can cause losses of up to 100%. Graphene-Cu nanocomposites have emerged as a potential alternative for pathogen control, thanks to their antimicrobial activity and their ability to induce the activation of the antioxidant defense system in plants. In the present study, the effect of the Graphene-Cu nanocomposites and the functionalization of graphene in the tomato crop inoculated with Fol was evaluated, analyzing their impacts on the antioxidant defense system, the foliar water potential (Ψ_h), and the efficiency of photosystem II (PSII). The results demonstrated multiple positive effects; in particular, the Graphene-Cu nanocomposite managed to delay the incidence of the "vascular wilt" disease and reduce the severity by 29.0%. This translated into an increase in the content of photosynthetic pigments and an increase in fruit production compared with Fol. In addition, the antioxidant system of the plants was improved, increasing the content of glutathione, flavonoids, and anthocyanins, and the activity of the GPX, PAL, and CAT enzymes. Regarding the impact on the water potential and the efficiency of the PSII, the plants inoculated with Fol and treated with the Graphene-Cu nanocomposite responded better to biotic stress compared with Fol, reducing water potential by up to 31.7% and Fv/Fm levels by 32.0%.

Engineered nanoparticles in plant growth: Phytotoxicity concerns and the strategies for their attenuation

In the agricultural sector, the use of engineered nanoparticles (ENPs) has been acclaimed as the next big thing for sustaining and increasing crop productivity. A vast amount of literature is available regarding the growth-promoting attributes of different ENPs. In this context, it has been emphasized that the ENPs can bolster vegetative growth, leaf development, and seed setting and also help in mitigating the effects of abiotic and biotic stresses. At the same time, there have been a lot of speculations and concerns regarding the phytotoxicity of ENPs off-late. In this connection, many research articles have presented the negative effects of ENPs on plant systems. These studies have highlighted that almost all the ENPs impart a certain degree of phytotoxicity in terms of reduction in growth, biomass, impairment of photosynthesis, oxidative status of plant cells, etc. Mostly, the ENPs based on metal or metal oxides (Cd, Cr, Pb, Ag, Ce, etc.) and nonmetals (C) that are introduced into the environment are known to incite inhibitory effects. However, the phytotoxicity of ENPs are known to be determined mostly by the chemical nature of the element, size, surface charge, coating molecules, and abiotic factors like pH and light. This review article, therefore, elucidates the phytotoxic properties of different ENPs and the plant responses induced at the molecular level subjected to nanoparticle exposure. Moreover, the article highlights the probable strategies that may be adopted for the suppression of the phytotoxicity of ENPs to ensure the safe and sustainable application of ENPs in crop fields.

Insights into growth-promoting effect of nanomaterials: Using transcriptomics and metabolomics to reveal the molecular mechanisms of MWCNTs in enhancing hyperaccumulator under heavy metal(loid)s stress

Carbon nanotubes present potential applications in soil remediation, particularly in phytoremediation. Yet, how multi-walled carbon nanotubes (MWCNTs) induced hyperaccumulator growth at molecular level remains unclear. Here, physio-biochemical, transcriptomic, and metabolomic analyses were performed to determine the effect of MWCNTs on Solanum nigrum L. (S. nigrum) growth under cadmium and arsenic stresses. 500 mg/kg MWCNTs application significantly promoted S. nigrum growth, especially for root tissues. Specially, MWCNTs application yields 1.38-fold, 1.56-fold, and 1.37-fold enhancement in the shoot length, root length, and fresh biomass, respectively. Furthermore, MWCNTs significantly strengthened P and Fe absorption in roots, as well as the activities of antioxidative enzymes. Importantly, the transcriptomic analysis indicated that S. nigrum gene expression was sensitive to MWCNTs, and MWCNTs upregulated advantageous biological processes under heavy metal(loid)s stress. Besides, MWCNTs reprogramed metabolism that related to defense system, leading to accumulation of 4-hydroxyphenylpyruvic acid (amino acid), 4-hydroxycinnamic acid (xenobiotic), and (S)-abscisic acid (lipid). In addition, key common pathways of differentially expressed metabolites and genes, including "tyrosine metabolism" and "isoquinoline alkaloid biosynthesis" were selected via integrating transcriptome and metabolome analyses. Combined omics technologies, our findings provide molecular mechanisms of MWCNTs in promoting S. nigrum growth, and highlight potential application of MWCNTs in soil remediation.

Multi-walled carbon nanotubes wrapped with polyvinylpyrrolidone can control the leaf yellowing of Alstroemeria cut flowers

The rapid yellowing of the leaves on cut flowers with leafy stems severely limits their vase life and commercial value. In this study, the effect of a composite of multi-walled carbon nanotubes (MWCNTs) and polyvinyl pyrrolidone (PVP) on the longevity of cut Alstroemeria flowers (Alstroemeria hybrida) was investigated to obtain a solution to this problem. A range of MWCNTs/PVP composite concentrations (0, 3, 6, and 9 mg L-1) was applied in a vase solution (for 24 h) as pulse treatments. Our findings indicate that the composite of MWCNTs and PVP exhibits excellent dispersibility in a vase solution. The results demonstrate that a 3 mg L-1 MWCNTs/PVP concentration was the most effective, extending the vase life of cut Alstroemeria flowers by up to 27 days. Pulsing with MWCNTs/PVP delayed the onset of floret abscission and leaf yellowing by 5 and 18 days, respectively. Additionally, when MWCNTs/PVP solution was applied to cut stems, water uptake remained consistently greater than that of the control. Additionally, MWCNTs/PVP increased the total chlorophyll content, soluble protein content, and POX enzyme activity of leaves while decreasing the malondialdehyde (MDA) content. The results indicate that this composite exhibited antimicrobial activity against gram-positive and -negative bacteria, particularly at a concentration of 3 mg L-1. This study demonstrated that adding MWCNTs/PVP to a vase solution of Alstroemeria cut flowers increased their longevity with minimal leaf yellowing symptoms compared to untreated cut stems. As a result, this nanocomposite can be used safely and effectively in vase solutions and in combination with other preservatives.

Seed Priming with Carbon Nanomaterials Improves the Bioactive Compounds of Tomato Plants under Saline Stress

The consumption of food with a high content of bioactive compounds is correlated with the prevention of chronic degenerative diseases. Tomato is a food with exceptional nutraceutical value; however, saline stress severely affects the yield, the quality of fruits, and the agricultural productivity of this crop. Recent studies have shown that seed priming can mitigate or alleviate the negative effects caused by this type of stress. However, the use of carbon nanomaterials (CNMs) in this technique has not been tested for this purpose. In the present study, the effects of tomato seed priming with carbon nanotubes (CNTs) and graphene (GP) (50, 250, and 500 mg L−1) and two controls (not sonicated and sonicated) were evaluated based on the content of photosynthetic pigments in the leaves; the physicochemical parameters of the fruits; and the presence of enzymatic and non-enzymatic antioxidant compounds, carotenoids, and stress biomarkers such as hydrogen peroxide (H2O2) and malondialdehyde (MDA) in the leaves and fruits of tomato plants without saline stress and with saline stress (50 mM NaCl). The results show that saline stress in combination with CNTs and GP increased the content of chlorophylls (9.1–21.7%), ascorbic acid (19.5%), glutathione (≈13%), proteins (9.9–11.9%), and phenols (14.2%) on the leaves. The addition of CNTs and GP increased the activity of enzymes (CAT, APX, GPX, and PAL). Likewise, there was also a slight increase in the content of H2O2 (by 20.5%) and MDA (3.7%) in the leaves. Salinity affected the quality of tomato fruits. The physico-chemical parameters and bioactive compounds in both the stressed and non-stressed tomato plants were modified with the addition of CNTs and GP. Higher contents of total soluble solids (25.9%), phenols (up to 144.85%), flavonoids (up to 37.63%), ascorbic acid (≈28%), and lycopene (12.4–36.2%) were observed. The addition of carbon nanomaterials by seed priming in tomato plants subjected to saline stress modifies the content of bioactive compounds in tomato fruits and improves the antioxidant defense system, suggesting possible protection of the plant from the negative impacts of stress by salinity. However, analysis of the mechanism of action of CNMs through seed priming, in greater depth is suggested, perhaps with the use of omics sciences.

Functional carbon nanodots improve soil quality and tomato tolerance in saline-alkali soils

High salinity and alkalinity of saline-alkali soil lead to soil deterioration, the subsequent osmotic stress and ion toxicity inhibited crops growth and productivity. In this research, 8 mg kg^-1 and 16 mg kg^-1 functional carbon nanodots (FCNs) can alleviate the adverse effects of saline-alkali on tomato plant at both seedling and harvest stages, thanks to their up-regulation effects on soil properties and plant physiological processes. On one hand, FCNs stimulate the plant potential of tolerance to saline-alkali and disease resistance through triggering the defense response of antioxidant system, enhancing the osmotic adjustment, promoting the nutrient uptake, transportation and utilization, and up-regulating the photosynthesis, thereby improve tomato growth and productivity in saline-alkali soils. On the other hand, FCNs application contributes to the improvement of soil physicochemical properties and fertilities, as well as decline soil salinity and alkalinity, which are related to plant growth and fruit quality. This research also focuses on the dose-dependent effects of FCNs on their regulation effects and toxicity to tomato growth under stress or non-stress. These findings recommend that FCNs could be applied as potential amendments to ameliorate the saline-alkali soil and improve the tomato tolerance and productivity in the Yellow River Delta.

Engineering plants with carbon nanotubes: a sustainable agriculture approach

Sustainable agriculture is an important conception to meet the growing food demand of the global population. The increased need for adequate and safe food, as well as the ongoing ecological destruction associated with conventional agriculture practices are key global challenges. Nanomaterials are being developed in the agriculture sector to improve the growth and protection of crops. Among the various engineered nanomaterials, carbon nanotubes (CNTs) are one of the most promising carbon-based nanomaterials owing to their attractive physiochemical properties such as small size, high surface area, and superior mechanical and thermal strength, offering better opportunities for agriculture sector applications. This review provides basic information about CNTs, including their history; classification; and electrical, thermal, and mechanical properties, with a focus on their applications in the agriculture field. Furthermore, the mechanisms of the uptake and translocation of CNTs in plants and their defense mechanisms against environmental stresses are discussed. Finally, the major shortcomings, threats, and challenges of CNTs are assessed to provide a broad and clear view of the potential and future directions for CNT-based agriculture applications to achieve the goal of sustainability.

A comprehensive review of impacts of diverse nanoparticles on growth, development and physiological adjustments in plants under changing environment

The application of nanotechnology in agriculture includes the use of nanofertilizers, nanopesticides, and nanoherbicides that enhance plant nutrition without disturbing the soil texture and protect it against microbial infections. Thus, nanotechnology maintains the plant's health by maintaining its soil health. The use of nanoparticles (NPs) in agriculture reduces the chemical spread and nutrient loss and boosts crop yield and productivity. Effect of NPs varies with their applied concentrations, physiochemical properties, and plant species. Various NPs have an impact on the plant to increase biomass productivity, germination rate and their physiology. Also, NPs change the plant molecular mechanisms by altering gene expression. Metal and non-metal oxides of NPs (Au, Ag, ZnO, Fe₂O₃, TiO₂, SiO₂, Al₂O₃, Se, carbon nanotubes, quantum dots) exert an important role in plant growth and development and perform an essential role in stress amelioration. On the other hand, other effects of NPs have also been well investigated by observing their role in growth suppression and inhibition of chlorophyll and photosynthetic efficiency. In this review, we addressed a description of studies that have been made to understand the effects of various kind of NPs, their translocation and interaction with the plants. Also, the phytoremediation approaches of contaminated soil with combined use of NPs for sustainable agriculture is covered.

Nutrient and tetracycline removal from simulated biogas slurry and biogas upgrading by microalgae cultivation under different carbon nanotubes concentrations

The present study sought to determine the effects of multi-walled carbon nanotubes (MWCNTs) concentrations (0-10 mg L^-1) on tetracycline (TC) and biogas slurry nutrient removal by microalga Chlorella vulgaris cultivation. Treatments with 1 mg L^-1 MWCNTs yielded the maximum chlorophyll a content, dry weight, and algal density of 143.73 ± 3.11 μg L^-1, 0.81 ± 0.008 g L^-1, and 5.83×10⁷ cells L^-1, respectively, suggesting that 1 mg L^-1 MWCNTs could enhance microalgal growth performance and photosynthesis effectively. The highest removal rates of chemical oxygen demand, total phosphorus, total nitrogen, TC, and CO₂ under 1 mg L^-1 MWCNTs were 90.43 ± 5.15%, 78.12 ± 4.33%, 77.07 ± 4.12%, 89.64 ± 3.08%, and 64.26 ± 0.71%, respectively. These results elucidated that moderate MWCNTs concentrations might promote TC and nutrient removal by enhancing Chlorella vulgaris photosynthesis activity.

Multi-Walled Carbon Nanotubes Improved Development during In Vitro Multiplication of Sugarcane (Saccharum spp.) in a Semi-Automated Bioreactor

Carbon nanotubes play an important role in plant biotechnology due to their effects on the growth and differentiation of cells, tissues, organs, and whole plants. This study aimed to evaluate the effect of multi-walled carbon nanotubes (MWCNTs) during in vitro multiplication of sugarcane (Saccharum spp.) using a temporary immersion system. Morphological characterization of MWCNTs was carried out under a transmission electron microscope. Different concentrations (0, 50, 100, 200 mg L⁻¹) of MWCNTs were added to Murashige and Skoog liquid culture medium in the multiplication stage. At 30 d of culture, number of shoots per explant, shoot length, number of leaves per shoot, total chlorophyll, dry matter percentage, carbon percentage, and macro- and micronutrient content were evaluated. Results showed an increase in the development of sugarcane shoots at concentrations of 100 and 200 mg L⁻¹ MWCNT. Total chlorophyll content increased at concentrations of 50 and 100 mg L⁻¹ MWCNT, whereas macro- and micronutrient content was variable at the different MWCNT concentrations. Results suggest a hormetic effect, characterized by stimulation at low concentrations. In conclusion, the use of low concentrations of MWCNTs had positive effects on development, total chlorophyll, carbon percentage, and macro- and micronutrient (N, Ca, S, Fe, Cu, Zn and Na) contents during in vitro multiplication of sugarcane and may have a potential use in other species of agricultural interest.