Electrospun cellulose acetate fiber mats containing curcumin and release characteristic of the herbal substance

Curcumin-based nanofibers: A promising approach for cancer therapy

Nanofibers are among the promising platforms for efficient delivery of drugs (both hydrophilic and hydrophobic) through harnessing polymers with different natures as their base. Hydrophobic low-solubility agents such as curcumin could be incorporated in various types of electrospun nanofibers for different aims in drug delivery, such as enhancing its solubility, making this agent sustained release with improved pharmacological efficacy. Through using this nanoplatform, curcumin may become more bioavailable and more efficcious in the field of cancer therapy as well as tissue engineering and wound healing for local delivery of this anti-inflammatory and antioxidant agent. In this review, the characteristics of curcumin-loaded nanofibers, their targeting potential or stimuli-responsiveness accompanied with therapeutic anti-cancerous applications of them (mostly in local application) are securitized. These nanofibers follow the aim of enhancing curcumin's therapeutic effectiveness and release profile. We laso elaborate on the mechanisms of action through which curcumin exerts its effect on various cancerous cells after its incorporation in various types of nanofibers which have been prepared by exploiting different polymers.

Nanotechnology for Healthcare: Plant-Derived Nanoparticles in Disease Treatment and Regenerative Medicine

Nanotechnology has revolutionised biomedical research, offering innovative healthcare solutions. Plant-based nanotechnology is emerging as a sustainable alternative, minimising environmental impacts and enhancing therapeutic effectiveness. This paper explores the potential of plant-derived nanoparticles (PNPs) in medicine, highlighting their biocompatibility, multifunctionality, and eco-friendliness. PNPs, synthesised through green methods, have demonstrated promising applications in drug delivery, cancer therapy, antimicrobial treatments, and tissue regeneration. Their unique properties, such as a high surface area and bioactive components, enable improved drug delivery, targeting, and controlled release, reducing side effects and enhancing treatment efficacy. Additionally, plant-derived compounds' inherent antimicrobial and antioxidant properties, retained within platinum nanoparticles (PNPs), present innovative opportunities for combating antimicrobial resistance and promoting wound healing. Despite their potential, challenges remain in standardising PNP synthesis, ensuring consistency, and scaling up production for industrial applications. This review emphasises the need for further research on PNP toxicity, biocompatibility, and regulatory frameworks to fully harness their capabilities in clinical and commercial applications. Plant-based nanotechnology represents a promising, greener alternative for advancing healthcare solutions, aligning with global sustainability goals.

Macrolide-loaded nanofibrous inserts with polycaprolactone and cellulose acetate base for sustained ocular delivery: Pharmacokinetic study in Rabbit's eye

The present study aimed to prepare nanofibrous inserts for sustained ocular drug delivery of Azithromycin (AZM) toward conquering the obstacles of conventional topical drug delivery. Nanofibers were fabricated by electrospinning using polycaprolactone (PCL) and cellulose acetate (CA) which are biocompatible and biodegradable polymers. Prepared nanofibers were evaluated in terms of physicochemical, morphological properties, pharmacokinetic study and ocular irritation. SEM images revealed average diameters of about 160 nm and 190 nm for CA and PCL nanofibers, respectively. These ocular drug delivery systems were strong, flexible, and stable under humid and dry conditions. Quantification was performed using microbiological assay by M. luteus as a microorganism. While PCL-based nanofibrous inserts released AZM in a two-step manner initiated by a burst release via Peppas kinetical model, CA-based inserts showed a gradual release profile without any burst release which followed the first-order model. Results showed that these inserts were non-cytotoxic and non-irritating. The nanofibers showed antibacterial efficacy against Escherichia coli and Staphylococcus aureus. In addition, according to a pharmacokinetic study in Rabbit's Eye, a higher Cmax and lower Tmax were achieved by PCL nanofibers compared to CA-based ones. The pharmacokinetic study of nanofibers in rabbit eyes showed that all formulations were able to maintain the effective concentration of AZM for about 6 days. In conclusion, the prepared nanofibers can be effectively utilized for prolonged ocular delivery of AZM in the treatment of conjunctival infections.

Cancer Treatment Using Nanofibers: A Review

Currently, the number of patients with cancer is expanding consistently because of a low quality of life. For this reason, the therapies used to treat cancer have received a lot of consideration from specialists. Numerous anticancer medications have been utilized to treat patients with cancer. However, the immediate utilization of anticancer medicines leads to unpleasant side effects for patients and there are many restrictions to applying these treatments. A number of polymers like cellulose, chitosan, Polyvinyl Alcohol (PVA), Polyacrylonitrile (PAN), peptides and Poly (hydroxy alkanoate) have good properties for the treatment of cancer, but the nanofibers-based target and controlled drug delivery system produced by the co-axial electrospinning technique have extraordinary properties like favorable mechanical characteristics, an excellent release profile, a high surface area, and a high sponginess and are harmless, bio-renewable, biofriendly, highly degradable, and can be produced very conveniently on an industrial scale. Thus, nanofibers produced through coaxial electrospinning can be designed to target specific cancer cells or tissues. By modifying the composition and properties of the nanofibers, researchers can control the release kinetics of the therapeutic agent and enhance its accumulation at the tumor site while minimizing systemic toxicity. The core-shell structure of coaxial electrospun nanofibers allows for a controlled and sustained release of therapeutic agents over time. This controlled release profile can improve the efficacy of cancer treatment by maintaining therapeutic drug concentrations within the tumor microenvironment for an extended period.

Ferulic acid's therapeutic odyssey: nano formulations, pre-clinical investigations, and patent perspective

INTRODUCTION

Ferulic acid (FA) is a phenolic phytochemical that has garnered the attention of the research community due to its abundant availability in nature. It is a compound that has been explored for its multifaceted therapeutic potential and benefits in modern and contemporary healthcare.

AREAS COVERED

This review furnishes a compilation of the molecular mechanisms underlying the anti-diabetic, anticancer, antioxidant, and anti-inflammatory effects of FA. We also aim to excavate an in-depth analysis of the role of nanoformulations to achieve release control, reduce toxicity, and deliver FA at specified target sites. To corroborate the safety and efficacy of FA, a multitude of pre-clinical studies have also been conducted by researchers and have been discussed comprehensively in this review. The various patented innovations and newer paradigms pertaining to FA have also been presented.

EXPERT OPINION

Enormous research has been conducted and should still be continued to find the best possible novel drug delivery system for FA delivery. The utilization of nanocarriers and nanoformulations has intrigued the scientists for delivery of FA, but before that, it is necessary to shed light upon toxicity, safety, and regulatory concerns of FA.

Nanocomposite fibers based on cellulose acetate loaded with fullerene for cancer therapy: preparation, characterization and in-vitro evaluation

The current prevalence of cancerous diseases necessitates the exploration of materials that can effectively treat these conditions while minimizing the occurrence of adverse side effects. This study aims to identify materials with the potential to inhibit the metastasis of cancerous diseases within the human body while concurrently serving as therapeutic agents for their treatment. A novel approach was employed to enhance the anti-cancer properties of electrospun cellulose fibers by incorporating fullerene nanoparticles (NPs) into cellulose acetate (CA) fibers, resulting in a composite material called Fullerene@CA. This development aimed at utilizing the anti-cancer properties of fullerenes for potential therapeutic applications. This process has been demonstrated in vitro against various types of cancer, and it was found that Fullerene@CA nanocomposite fibers displayed robust anticancer activity. Cancer cells (Caco-2, MDA-MB 231, and HepG-2 cells) were inhibited by 0.3 and 0.5 mg.g-1 fullerene doses by 58.62-62.87%, 47.86-56.43%, and 48.60-57.73%, respectively. The tested cancer cells shrink and lose their spindle shape due to morphological changes. The investigation of the prepared nanocomposite reveals its impact on various genes, such as BCL2, NF-KB, p53, Bax, and p21, highlighting the therapeutic compounds' effectiveness. The experimental results demonstrated that the incorporation of NPs into CA fibers resulted in a significant improvement in their anti-cancer efficacy. Therefore, it is suggested that these modified fibers could be utilized as a novel therapeutic approach for the treatment and prevention of cancer metastasis.

Innovative Bioactive Nanofibrous Materials Combining Medicinal and Aromatic Plant Extracts and Electrospinning Method

Since antiquity, humans have known about plants as a medicinal cure. Recently, plant extracts are attracting more attention as a result of their natural origin and wide range of desirable features. Nanotechnology's progress and innovations enable the production of novel materials with enhanced properties for a broad range of applications. Electrospinning is a cutting-edge, flexible and economical technique that allows the creation of continuous nano- and microfibrous membranes with tunable structure, characteristics and functionalities. Electrospun fibrous materials are used in drug delivery, tissue engineering, wound healing, cosmetics, food packaging, agriculture and other fields due to their useful properties such as a large surface area to volume ratio and high porosity with small pore size. By encapsulating plant extracts in a suitable polymer matrix, electrospinning can increase the medicinal potential of these extracts, thus improving their bioavailability and maintaining the required concentration of bioactive compounds at the target site. Moreover, the created hybrid fibrous materials could possess antimicrobial, antifungal, antitumor, anti-inflammatory and antioxidant properties that make the obtained structures attractive for biomedical and pharmaceutical applications. This review summarizes the known approaches that have been applied to fabricate fibrous materials loaded with diverse plant extracts by electrospinning. Some potential applications of the extract-containing micro- and nanofibers such as wound dressings, drug delivery systems, scaffolds for tissue engineering and active food packaging systems are discussed.

Biodegradable Polycaprolactone Fibers with Silica Aerogel and Nanosilver Particles Produce a Coagulation Effect

Poly-ε-caprolactone (PCL) is a biodegradable aliphatic polyester that can be used in the field of biomaterials. Electrospinning is the name given to the process of producing micro and nanoscale fibers using electrostatically charged polymeric solutions under certain conditions. Almost all synthetic and naturally occurring polymers can undergo electrospinning using suitable solvents or mixtures prepared in certain proportions. In this study, silica aerogels were obtained by the sol-gel method. PCL-silica aerogel fibers were synthesized by adding 0.5, 1, 2, and 4% ratios in the PCL solution. Blood contact analysis was performed on the produced fibers with UV-VIS. According to the results obtained, 0.5, 1, 2, and 4% nano-silver were added to the fiber-containing 4% aerogel. Then, SEM-EDS and FTIR analyses were performed on all fibers produced. Antimicrobial tests were performed on fibers containing nano-silver. As a result, high-performance blood coagulation fibers were developed using PCL with aerogel, and an antimicrobial effect was achieved with nano-silver particles. It is thought that the designed surface will be preferred in wound dressing and biomaterial in tissue engineering, as it provides a high amount of cell adhesion with a small amount of blood and contains antimicrobial properties.

Curcumin-loaded nanofilm generating avascular niche to stabilize in vivo ectopic chondrogenesis of BMSC

Bone marrow stem cells (BMSCs) engineered cartilage (BEC) represent a promising substitute for cartilage repairment. However, the in vitro-generated BEC was prone to endochondral ossification after in vivo ectopic implantation, significantly hindering its clinical translation. Increasing evidence suggested that vascularization essentially led to endochondral ossification of BEC in the subcutaneous microenvironment. Herein, a potent antiangiogenic agent of curcumin (Cur) was successfully laden into a polycaprolactone (PCL) to prepare a Cur/PCL nanofilm. The in vitro findings of this study showed that after co-culturing with human umbilical vein endothelial cells, Cur was sustained-released from Cur/PCL and suppressed the formation of tubes. Further, the Cur/PCL nanofilm was cytocompatible when recolonized with BMSCs. BMSCs were seeded into a porous polyglycolic acid scaffold and underwent 4 weeks of in vitro chondrogenic culture to successfully produce BEC. Thereafter, the BEC is encapsulated by the Cur/PCL nanofilm and subcutaneously implanted into nude mice for 4 weeks. The localized and sustained Cur release could inhibit vascular invasion via the antagonization of vascular endothelial growth factor signal, and stabilizes the cartilaginous phenotype. The results confirmed that Cur/PCL nanofilms protected BEC from vascularization and endochondral ossification in vivo, thus, indicating that the encapsulation of BEC using an anti-angiogenic nanofilm could be used as a novel strategy for modulating the in vivo ectopic BEC stability to repair cartilage defects.

Covalent Grafting of 5-Aminolevulinic Acid onto Polylactic Acid Films and Their Photodynamic Potency in Preserving Salmon

A novel photodynamic inactivation (PDI)-mediated antimicrobial film of polylactic acid/5-aminolevulinic acid (PLA/ALA) was successfully fabricated by a covalent grafting method using low-temperature plasma. The chemical structure, surface morphology, hydrophilic ability, and mechanical and barrier properties of the films were characterized, and their antibacterial, anti-biofilm potency and preservation effects on ready-to-eat salmon were investigated during storage. Results showed that the amino group of ALA was covalently grafted with the carboxyl group on the surface of PLA after the plasma treatment, with the highest grafting rate reaching ∼50%. The fabricated PLA/ALA films displayed an enhanced barrier ability against water vapor and oxygen. Under blue light-emitting diode illumination, the PLA/ALA films generated massive reactive oxygen species from the endogenous porphyrins in cells induced by ALA and then fatally destroyed the cell wall of planktonic cells and the architectural structures of sessile biofilms of the pathogens (Listeria monocytogenes and Vibrio parahaemolyticus) and spoilage bacterium (Shewanella putrefaciens). More importantly, the PDI-mediated PLA/ALA films potently inhibited 99.9% native bacteria on ready-to-eat salmon and significantly suppressed the changes of its drip loss, pH, and lipid oxidation (MDA) during storage, and on this basis, the shelf life of salmon was extended by 4 days compared with that of the commercial polyethylene film. Therefore, the PDI-mediated PLA/ALA films are valid in inactivating harmful bacterial and preserving the quality of seafood.

Electrospun fibers as carriers for topical drug delivery and release in skin bandages and patches for atopic dermatitis treatment

The skin is a complex layer system and the most important barrier between the environment and the organism. In this review, we describe some widespread skin problems, with a focus on eczema, which are affecting more and more people all over the world. Most of treatment methods for atopic dermatitis (AD) are focused on increasing skin moisture and protecting from bacterial infection and external irritation. Topical and transdermal treatments have specific requirements for drug delivery. Breathability, flexibility, good mechanical properties, biocompatibility, and efficacy are important for the patches used for skin. Up to today, electrospun fibers are mostly used for wound dressing. Their properties, however, meet the requirements for skin patches for the treatment of AD. Active agents can be incorporated into fibers by blending, coaxial or side-by-side electrospinning, and also by physical absorption post-processing. Drug release from the electrospun membranes is affected by drug and polymer properties and the technique used to combine them into the patch. We describe in detail the in vitro release mechanisms, parameters affecting the drug transport, and their kinetics, including theoretical approaches. In addition, we present the current research on skin patch design. This review summarizes the current extensive know-how on electrospun fibers as skin drug delivery systems, while underlining the advantages in their prospective use as patches for atopic dermatitis. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Culture and maintenance of neural progressive cells on cellulose acetate/graphene‑gold nanocomposites

In this study, the first CA nanofibers were fabricated by electrospinning under optimal conditions: flow rate of 0.5 ml/h, a voltage of 20 kV, electrospinning distance of 15 cm, and an internal temperature of 25 °C, and humidity of 38%. The used Graphene/gold nanoparticles for CA performance improvement were examined by TGA, XRD, and SEM analysis. Then the CA/graphene‑gold nanocomposite was synthesized under optimum electrospinning conditions: flow rate 3 ml/h, voltage 20 kV, electrospinning distance 15 cm, internal temperature 26 °C, and humidity 36%. The SEM images revealed that the nanofibers' thicknesses of Graphene‑gold NPs (CA₁) and Chitosan (CA₂) were 350 and 120 nm, respectively. The XRD diagrams of CA₀, CA₁ and CA₂ revealed the peaks at 2θ, 8°, and 21° with Miller indices of (001) and (110) are related to CA (CA₀), which proves its presence in other scaffolds. The FTIR analysis of samples indicated the presence of graphene‑gold NPs in scaffolding CA₁ and CA₂. The CA₂ nanofibers exhibited a high-water absorption capacity of about 2500% with the water contact-angle and Swelling method. The antibacterial properties of this nanocomposite were also confirmed by an antibacterial test on Staphylococcus aureus bacteria. The growth of Schwann cells on three scaffolds showed the highest growth of cells on CA₁ scaffolds.

In-Vitro Antibacterial Activity of Curcumin-Loaded Nanofibers Based on Hyaluronic Acid against Multidrug-Resistant ESKAPE Pathogens

Bacterial infections have accompanied humanity throughout its history and became vitally important in the pandemic area. The most pathogenic bacteria are multidrug-resistant strains, which have become widespread due to their natural biological response to the use of antibiotics, including uncontrolled use. The current challenge is finding highly effective antibacterial agents of natural origin, which, however, have low solubility and consequently poor bioavailability. Curcumin, derived from Curcuma longa, is an example of a natural biologically active agent with a wide spectrum of biological effects, particularly against Gram-positive bacteria. However, curcumin exhibits extremely low antibacterial activity against Gram-negative bacteria. Curcumin’s hydrophobicity limits its use in medicine. As such, various polymeric systems have been used, especially biopolymer-based electrospun nanofibers. In the present study, the technological features of the fabrication of curcumin-loaded hyaluronic acid-based nanofibers are discussed in detail, their morphological characteristics, wettability, physico-chemical properties, and curcumin release profiles are demonstrated, and their antibacterial activity against multi-drug resistant ESKAPE pathogens (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter species) are evaluated. It is noteworthy that the fibers containing a stable HA–curcumin complex showed high antibacterial activity against both Gram-positive and Gram-negative bacteria, which is an undeniable advantage. It is expected that the results of this work will contribute to the development of antibacterial drugs for topical and internal use with high efficacy and considerably lower side effects.

Development and optimization of curcumin analog nano-bilosomes using 21.31 full factorial design for anti-tumor profiles improvement in human hepatocellular carcinoma: in-vitro evaluation, in-vivo safety assay

Curcumin (CU) is a natural polyphenolic phytoingredient. CU has anti-inflammatory, anti-oxidant, and anticancer activities. The poor solubility, bioavailability, and stability of CU diminish its clinical application. Hence, structural modification of CU is highly recommended. The CU analog; 3,5-bis(4-bromobenzylidene)-1-propanoylpiperidin-4-one (PIP) exhibited high stability, safety, and more potent antiproliferative activity against hepatocellular carcinoma. In the present study, nano-bilosomes (BLs) were formulated to augment PIP delivery and enhance its solubility. A 2¹.3¹ full factorial design was adopted to prepare the synthesized PIP-loaded BLs. Optimized F4 showed a biphasic release pattern extended over 24 h, with EE%, ZP, and PS of 90.21 ± 1.0%, −27.05 ± 1.08 mV, and 111.68 ± 1.4 nm. PIP-loaded BLs were tested for safety against a non-cancerous cell line (Wi-38) and for anticancer activity against the Huh-7 human hepatocellular carcinoma cells and compared to the standard anticancer drug doxorubicin (Dox). The anticancer selectivity index of PIP-loaded BLs recorded 420.55 against Huh-7 liver cancer cells, markedly higher than a CU suspension (18.959) or the Dox (20.82). The antiproliferative activity of nano-encapsulated PIP was roughly equivalent to Dox. PIP-loaded BLs, showed enhanced drug solubility, and enhanced anticancer effect, with lower toxicity and higher selectivity against Huh-7 liver cancer cells, compared to the parent CU.

A Review on Curcumin-Loaded Electrospun Nanofibers and their Application in Modern Medicine

Herbal drugs are safe and show significantly fewer side effects than their synthetic counterparts. Curcumin (an active ingredient primarily found in turmeric) shows therapeutic properties, but its commercial use as a medication is unrealized, because of doubts about its potency. The literature reveals that electrospun nanofibers show simplicity, efficiency, cost, and reproducibility compared to other fabricating techniques. Forcespinning is a new technique that minimizes limitations and provides additional advantages to electrospinning. Polymer-based nanofibers-whose advantages lie in stability, solubility, and drug storage-overcome problems related to drug delivery, like instability and hydrophobicity. Curcumin-loaded polymer nanofibers show potency in healing diabetic wounds in vitro and in vivo. The release profiles, cell viability, and proliferation assays substantiate their efficacy in bone tissue repair and drug delivery against lung, breast, colorectal, squamous, glioma, and endometrial cancer cells. This review mainly discusses how polymer nanofibers interact with curcumin and its medical efficacy.

SpAD Biofunctionalized Cellulose Acetate Scaffolds Inhibit Staphylococcus aureus Adherence in a Coordinating Function with the von Willebrand A1 Domain (vWF A1)

Staphylococcus aureus is one of the major pathogens causing and spreading hospital acquired infections. Since it is highly resistant to new generation antibiotics, novel strategies have to be developed such as the construction of biofunctionalized non-adherent surfaces that will prevent its tethering and subsequent spread in the hospital environment. In this frame, the domain D of protein A (SpAD) of S. aureus has been immobilized onto cellulose acetate scaffolds by using the streptavidin/biotin interaction, in order to study its interaction with the A1 domain of von Willebrand factor (vWF A1), a protein essential for hemostasis, found in human plasma. Subsequently, the biofunctionalized cellulose acetate scaffolds were incubated with S. aureus in the presence and absence of vWF A1 at different time periods and their potential to inhibit S. aureus growth was studied with scanning electron microscopy (SEM). The SpAD biofunctionalized scaffolds perceptibly ameliorated the non-adherent properties of the material, and in particular, the interaction between SpAD and vWF A1 effectively inhibited the growth of S. aureus. Thus, the exhibition of significant non-adherent properties of scaffolds addresses their potential use for covering medical equipment, implants, and stents.

Recent Advancements in Plant-Derived Nanomaterials Research for Biomedical Applications

Engineering, physics, chemistry, and biology are all involved in nanotechnology, which comprises a wide variety of multidisciplinary scientific field devices. The holistic utilization of metallic nanoparticles in the disciplines of bio-engineering and bio-medicine has attracted a great deal of attention. Medical nanotechnology research can offer immense health benefits for humans. While the advantages of developing nanomaterials have been well documented, it is precisely apparent that there are still some major issues that remain unattended to those need to be resolved immediately so as to ensure that they do not adversely affect living organisms in any manner. The existence of nanoparticles gives them particular value in biology and materials science, as an emerging scientific field, with multiple applications in science and technology, especially with numerous frontiers in the development of new materials. Presented here is a review of recent noteworthy developments regarding plant-derived nanomaterials and their use in the development of medicine and biomedical applications around the world.

Preparation and characterization of polylactic acid/fenugreek essential oil/curcumin composite films for food packaging applications

Curcumin and Fenugreek essential oil (FEO) were blended into the PLA matrix by solution casting technique to improve the functional properties of the composite film. Both fillers (curcumin and FEO) were properly combined and uniformly distributed in the polymer matrix to create a PLA-compatible composite evidenced by Scanning electron microscope (SEM) and Fourier Transform Infrared (FT-IR) results. The addition of FEO and curcumin to the composite film improved UV-blocking, surface color, tensile strength, flexibility, thickness, and Water contact angle (WCA). However, the inclusion of curcumin and FEO slightly diminish the Water vapor permeability (WVP) while maintaining its thermal stability. The PLA-based composite film exhibited good antibacterial and anti-oxidant properties. In addition, a food quality test was performed on strawberry, and the results were compared to the commercial (polyethylene) film.

Antimicrobial, Antibiofilm, and Antioxidant Activity of Functional Poly(Butylene Succinate) Films Modified with Curcumin and Carvacrol

The use of food industry waste as bioactive compounds in the modification of biodegradable films as food packaging remains a major challenge. This study describes the preparation and bioactivity characterization of poly(butylene succinate) (PBS)-based films with the addition of the bioactive compounds curcumin (CUR) and carvacrol (CAR). Films based on PBS modified with curcumin and carvacrol at different concentration variations (0%/0.1%/1%) were prepared by solvent casting method. The antioxidant, antimicrobial, and antibiofilm properties were investigated against bacteria (Escherichia coli, Staphylococcus aureus) and fungi (Candida albicans). As a result of the modification, the films exhibited free radicals scavenging (DPPH up to 91.47% and ABTS up to 99.21%), as well as antimicrobial (6 log, 4 log, and 2 log reductions for E. coli, S. aureus, and C. albicans, respectively, for samples modified with 1% CUR and 1% CAR) activity. Moreover, antibiofilm activity of modified materials was observed (8.22-87.91% reduction of biofilm, depending on bioactive compounds concentration). PBS films modified with curcumin and carvacrol with observed bifunctional properties have many potential applications as active packaging.

Evaluation of Freeze Drying and Electrospinning Techniques for Saffron Encapsulation and Storage Stability of Encapsulated Bioactives

Saffron extract was encapsulated into a gelatin matrix by means of electrospinning and freeze drying techniques and the degradation kinetics of bioactive compounds were evaluated during their storage at 4, 24, and 35 °C as compared to non-encapsulated control. The encapsulation efficiency, thermal properties, storage stability, morphology, and diameter distribution of the encapsulated saffron extract were evaluated as output parameters. In general, both encapsulation techniques demonstrated superior retention of bioactive compounds compared to samples without encapsulation during the entire storage period. Electrospinning and freeze drying techniques were able to retain at least 96.2 and 93.7% of crocin, respectively, after 42 days of storage at 35 °C with the 15% saffron extract. The half-life (t1/2) time parameter for the control sample (with 15% saffron extract without encapsulation) was 22 days at 4 °C temperature, while that encapsulated by electrospinning was 138 days and that obtained for freeze drying was 77 days, The half-lives were longer at lower temperatures. The encapsulation efficiency of crocin, picrocrocin, and safranal associated with the electro-spun gelatin fibers were 76.3, 86.0, and 74.2%, respectively, and in comparison, the freeze drying encapsulation efficiencies were relatively lower, at 69.0, 74.7, and 65.8%, respectively. Electro-spun gelatin fibers also had higher melting and denaturation temperatures of 78.3 °C and 108.1 °C, respectively, as compared to 65.4 °C and 93.2 °C, respectively, for freeze-dried samples. Thus, from all respects, it was concluded that electrospinning was a better and more effective technique than freeze drying in terms of preserving saffron bioactive compounds.

Understanding and utilizing textile-based electrostatic flocking for biomedical applications

Electrostatic flocking immobilizes electrical charges to the surface of microfibers from a high voltage-connected electrode and utilizes Coulombic forces to propel microfibers toward an adhesive-coated substrate, leaving a forest of aligned fibers. This traditional textile engineering technique has been used to modify surfaces or to create standalone anisotropic structures. Notably, a small body of evidence validating the use of electrostatic flocking for biomedical applications has emerged over the past several years. Noting the growing interest in utilizing electrostatic flocking in biomedical research, we aim to provide an overview of electrostatic flocking, including the principle, setups, and general and biomedical considerations, and propose a variety of biomedical applications. We begin with an introduction to the development and general applications of electrostatic flocking. Additionally, we introduce and review some of the flocking physics and mathematical considerations. We then discuss how to select, synthesize, and tune the main components (flocking fibers, adhesives, substrates) of electrostatic flocking for biomedical applications. After reviewing the considerations necessary for applying flocking toward biomedical research, we introduce a variety of proposed use cases including bone and skin tissue engineering, wound healing and wound management, and specimen swabbing. Finally, we presented the industrial comments followed by conclusions and future directions. We hope this review article inspires a broad audience of biomedical, material, and physics researchers to apply electrostatic flocking technology to solve a variety of biomedical and materials science problems.

Cellulose Acetate Nanofibers: Incorporating Hydroxyapatite (HA), HA/Berberine or HA/Moghat Composites, as Scaffolds to Enhance In Vitro Osteoporotic Bone Regeneration

The specific objective of this study was to stabilize a simple valid method to prepare pure nanorod hydroxyapatite (HA) mixed with berberine chloride (BER) and Moghat water extract (ME) as composites for incorporation into cellulose acetate (CA) nanofibers to be used as novel bone scaffolds and to determine their efficacy in bone regeneration process In Vitro. Preparation of HA/BER and HA/ME composites were performed by mixing powders using the ball-milling machine. The HA, HA/BER, and HA/ME composites at a concentration of 6.25, 12.5, 25, 50, 100, and 200 mg were mixed with CA solution (13%), then the fiber was formed using electrospinning technique. The properties of the obtained CA fibers were investigated (SEM, TEM, EDX, FTIR, TGA, water uptake, porosity, and mechanical tests). The efficacy of HA and HA composites loaded into CA nanofiber on osteoblast and osteoclast differentiation were measured by tacking ALP, osteocalcin, TRAcP, calcium, and total protein concentration. Moreover, their effects on cell differentiation (CD90 and PARP- ɣ) and death markers (GSK3b, MAPK, Wnt-5 and β-catenin) were evaluated by using ELISA and qPCR. The obtained TEM results indicated that the continuous CA and CA/HA composites electrospun fibers have ultrafine fiber diameters of about 200 nm and uniform distribution of discrete n-HA clusters throughout. In addition, hydrocortisone (HCT) was found to increase the formation of adipocytes and osteoclastic markers CD90 and p38-MAPK which indicated the bone lose process take placed. Treatment with CA loaded with HA, HA/BER or HA/ME decreased CD90, Wnt-5, PARP- ɣ, GSK3b and p38-MAPK associated elevation of osteogenic markers: ALP and osteocalcin. Moreover, HCT overexpressed RANKL and down expressed Osterix gene. Treatment with CA/HA/BER or CA/HA/ME downregulated RANKL and upregulated Osterix associated with a reduction in RANKL/OPG ratio, at p < 0.05. In conclusion, novel CA composite nanofibers (CA/HA/BER and CA/HA/ME) reversed the HCT adverse effect on osteoblast cell death through canonical and non-canonical pathways regulated by Wnt/β-catenin and Wnt/Ca(²⁺) pathways. Furthermore, our data confirmed that the novel scaffolds create a crosstalk between RUNX-2, RANKL, p38-MAPK, and Wnt signals which positively impact bone regeneration process. Treatment with CA/HA/BER is better compared to the treatment with CA/HA/ME. Nevertheless, both are considered as alternative biomaterial scaffolds with a potential for biomedical applications in the field of bone tissue engineering.

Deacetylated cellulose acetate nanofibrous dressing loaded with chitosan/propolis nanoparticles for the effective treatment of burn wounds

Every year, about 1 out of 9 get burnt in Egypt, with a mortality rate of 37%, and they suffer from physical disfigurement and trauma. For the treatment of second-degree burns, we aim at making a smart bandage provided with control of drug release (using chitosan nanoparticles) to enhance the healing process. This bandage is composed of natural materials; namely, cellulose acetate (CA), chitosan, and propolis (bee resin) as the loaded drug. Cellulose acetate nanofibers were deacetylated by NaOH after optimizing the reaction time and the concentration of NaOH solution, and the product was confirmed with FTIR analysis. Chitosan/propolis nanoparticles were prepared by ion gelation method with size ranging from 100 to 200 nm and a polydispersity index of 0.3. Chitosan/propolis nanoparticles were preloaded in the CA solution to ensure homogeneity. Loaded deacetylated cellulose nanofibers have shown the highest hydrophobicity measured by contact angle. Cytotoxicity of propolis and chitosan/propolis nanoparticles were tested and the experimental IC₅₀ value was about 137.5 and 116.0 μg/mL, respectively, with p-value ≤0.001. In addition, chitosan/propolis nanoparticles loaded into cellulose nanofibers showed a cell viability of 89.46% in the cell viability test. In-vivo experiments showed that after 21 days of treatment with the loaded nanofibers repairing of epithelial cells, hair follicles and sebaceous glands in the skin of the burn wound were found in albino-mice model.

Perspective on the application of medicinal plants and natural products in wound healing: A mechanistic review

Wound is defined as any injury to the body such as damage to the epidermis of the skin and disturbance to its normal anatomy and function. Since ancient times, the importance of wound healing has been recognized, and many efforts have been made to develop novel wound dressings made of the best material for rapid and effective wound healing. Medicinal plants play a great role in the wound healing process. In recent decades, many studies have focused on the development of novel wound dressings that incorporate medicinal plant extracts or their purified active compounds, which are potential alternatives to conventional wound dressings. Several studies have also investigated the mechanism of action of various herbal medicines in wound healing process. This paper attempts to highlight and review the mechanistic perspective of wound healing mediated by plant-based natural products. The findings showed that herbal medicines act through multiple mechanisms and are involved in various stages of wound healing. Some herbal medicines increase the expression of vascular endothelial growth factor (VEGF) and transforming growth factor-β (TGF-β) which play important role in stimulation of re-epithelialization, angiogenesis, formation of granulation tissue, and collagen fiber deposition. Some other wound dressing containing herbal medicines act as inhibitor of tumor necrosis factor-α (TNF-α), interleukin-1β (IL-1β) and inducible nitric oxide synthase (iNOS) protein expression thereby inducing antioxidant and anti-inflammatory properties in various phases of the wound healing process. Besides the growing public interest in traditional and alternative medicine, the use of herbal medicine and natural products for wound healing has many advantages over conventional medicines, including greater effectiveness due to diverse mechanisms of action, antibacterial activity, and safety in long-term wound dressing usage.

Understanding release kinetics and collapse proof suture retention response of curcumin loaded electrospun mats based on aliphatic polyesters and their blends

The paper aims at designing and fabrication of PLA/PCL blended suture resistant electrospun mats (EMs) encapsulating non-toxic curcumin and optimization of its release behavior, to facilitate its sustained release at the targeted areas, without complexation with any chemical and/or synthetic drug. The release of curcumin from PLA/PCL blended EMs followed a diffusion-controlled mechanism, as evident from the agreement of the experimental release data with Peppas- Korsmeyer, Higuchi, and Kopcha model. The curcumin embedded EMs have effectively rendered a release confirming to a new generalized logarithmic model. PLA/PCL blended EMs have proved to be an excellent carrier system, exhibiting enhanced cumulative curcumin release with an increase in curcumin loading. The evaluation of structural and viscoelastic properties of the fabricated EMs showed an increase in modulus and strength, along with a subsequent decrease in elongation, with an increase in curcumin content. Suture-induced cooperative collapse dynamics the EMs have been found to be a three-stage process involving stable, stable-unstable, and fast-unstable structural failure corresponding to network realignment, lateral pullout/fracture of fibers, and divergent tearing along the crack path. The viscoelastic responses showed a prominent shift in glass transition temperature (T_g) of the PCL phase indicating the development of curcumin-induced microstructural changes attributed to the H-bonding interaction with polymer segments of PLA/PCL-based EMs. Our study demonstrates, functionally efficient designing of PLA/PCL-based curcumin-loaded biodegradable EMs with sustained retention of tunable mechanical properties and hydrophobicity, irrespective of the extent of (in-vitro) curcumin release.

Effect of Curcumin Addition on the Properties of Biodegradable Pectin/Chitosan Films

A pectin/chitosan matrix-loaded curcumin film (PCCF) with a deep eutectic solvent (DES) as the solvent and plasticizer was prepared in this study. Different quantities of curcumin (identified as PCCF-0, PCCF-1, PCCF-2. PCCF-3) were loaded on the pectin/chitosan film in order to evaluate their effects on the film properties. Results showed that curcumin could interact with the pectin/chitosan matrix and form a complex three-dimensional network structure. PCCF could promote the thickness, tensile strength, thermal properties, antioxidant and antiseptic capacities, but deteriorate the light transmission and elongation at the same time. The addition of curcumin would change the color of the film, without significantly affecting the moisture content. The tensile strength of PCCF-3 reached the maximum value of 3.75 MPa, while the elongation decreased to 10%. Meanwhile, the water-resistance properties of PCCF-3 were significantly promoted by 8.6% compared with that of PCCF-0. Furthermore, PCCF showed remarkable sustained antioxidant activities in a dose-dependent manner. PCCF-3 could inhibit DPPH and ABTS free radicals by 58.66% and 29.07%, respectively. It also showed antiseptic capacity on fresh pork during storage. Therefore, curcumin addition could improve the barrier, mechanical, antioxidant and antiseptic properties of the polysaccharide-based film and PCCF has the potential to be used as a new kind of food packaging material in the food industry.

Vitamin D3-loaded electrospun cellulose acetate/polycaprolactone nanofibers: Characterization, in-vitro drug release and cytotoxicity studies

Vitamin D deficiency is now a global health problem; despite several drug delivery systems for carrying vitamin D due to low bioavailability and loss bioactivity. Developing a new drug delivery system to deliver vitamin D₃ is a strong incentive in the current study. Hence, an implantable drug delivery system (IDDS) was developed from the electrospun cellulose acetate (CA) and ε-polycaprolactone (PCL) nanofibrous membrane, in which the core of implants consists of vitamin D₃-loaded CA nanofiber (CAVD) and enclosed in a thin layer of the PCL membrane (CAVD/PCL). CA nanofibrous mat loaded with vitamin D₃ at the concentrations of 6, 12, and 20% (w/w) of vitamin D₃ were produced using electrospinning. The smooth and bead-free fibers with diameters ranged from 324 to 428 nm were obtained. The fiber diameters increased with an increase in vitamin D₃ content. The controlled drug release profile was observed over 30-days, which fit with the zero-order model (R² > 0.96) in the first stage. The mechanical properties of IDDS were improved. Young's modulus and tensile strength of CAVD/PCL (dry) were161 ± 14 and 13.07 ± 2.5 MPa, respectively. CA and PCL nanofibers are non-cytotoxic based on the results of the in-vitro cytotoxicity studies. This study can further broaden in-vivo study and provide a reference for developing a new IDDS to carry vitamin D₃ in the future.

Polysaccharides-Based Complex Particles' Protective Role on the Stability and Bioactivity of Immobilized Curcumin

The curcumin degradation represents a significant limitation for its applications. The stability of free curcumin (FC) and immobilized curcumin in complex particles (ComPs) based on different polysaccharides was studied under the action of several factors. Ultraviolet-visible (UV-VIS) and Fourier-transform infrared (FTIR) spectroscopy proved the FC photodegradation and its role as a metal chelator: 82% of FC and between 26% and 39.79% of curcumin within the ComPs degraded after exposure for 28 days to natural light. The degradation half-life (t_1/2) decreases for FC when the pH increases, from 6.8 h at pH = 3 to 2.1 h at pH = 9. For curcumin extracted from ComPs, t_1/2 was constant (between 10 and 13 h) and depended on the sample’s composition. The total phenol (TPC) and total flavonoids (TFC) content values increased by 16% and 13%, respectively, for FC exposed to ultraviolet light at λ = 365 nm (UVA), whereas no significant change was observed for immobilized curcumin. Antioxidant activity expressed by IC₅₀ (µmoles/mL) for FC exposed to UVA decreased by 29%, but curcumin within ComPs was not affected by the UVA. The bovine serum albumin (BSA) adsorption efficiency on the ComPs surface depends on the pH value and the cross-linking degree. ComPs have a protective role for the immobilized curcumin.

Electrospun fibers based on botanical, seaweed, microbial, and animal sourced biomacromolecules and their multidimensional applications

This review summarizes and broadly classifies all of the major sustainable natural carbohydrate bio-macromolecular manifestations in nature - from botanical (cellulose, starch, and pectin), seaweed (alginate, carrageenan, and agar), microbial (bacterial cellulose, dextran, and pullulan), and animal (hyaluronan, heparin, chitin, and chitosan) sources - that have been contrived into electrospun fibers. Furthermore, a relative study of these biomaterials for the fabrication of nanofibers by electrospinning and their characteristics viz. solution behavior, blending nature, as well as rheological and fiber attributes are discussed. The potential multidimensional applications of nanofibers (filtration, antimicrobial, biosensor, gas sensor, energy storage, catalytic, and tissue engineering) originating from these polysaccharides and their major impacts on the properties, functionalities, and uses of these electrospun fibers are compared and critically examined.

Effective antibacterial electrospun cellulose acetate nanofibrous patches containing chitosan/erythromycin nanoparticles

Herein, we fabricated the antibacterial nanofibrous mats composed of cellulose acetate (CA) nanofibers loaded with erythromycin-chitosan nanoparticles (Ery-CS NPs) intended for infected wound dressing. The Ery-loaded CS NPs were prepared by ionic gelation process and then incorporated into the CA electrospun nanofibers (NFs). Regarding physiochemical properties, the NPs and obtained mats were characterized using dynamic light scattering (DLS), scanning electron microscopy (SEM), attenuated total reflection fourier transform infrared (ATR-FTIR), and contact angle measurement. The antimicrobial activity and cell viability of fibroblast cells were also evaluated. The results indicated that Ery was loaded into CS NPs with high encapsulation efficiency (95%). The CA NFs (17% w/v) incorporated with the Ery-CS NPs (12 wt%) displayed smooth homogenous morphology with 141.7 ± 91.7 nm average diameter. The relevant analyses confirmed that the NPs incorporated into NFs and provided high water holding capacity with high porosity. Finally, Ery-CS NPs/CA mats were able to inhibit the growth of both Gram-positive and Gram-negative bacteria as well as showed no cytotoxic effect on the human dermal fibroblast cells. Overall, our findings concluded that the proposed system could be potentially applied as the proper antibacterial mats for infected wound dressing applications.

Bioactive Sambong oil-loaded electrospun cellulose acetate nanofibers: Preparation, characterization, and in-vitro biocompatibility

Blumea balsamifera oil loaded cellulose acetate nanofiber mats were prepared by electrospinning. The inclusion of blumea oil increased the nanofiber diameter. FTIR spectra confirm the addition of blumea oil in the nanofiber mats. The XRD pattern suggests that the inclusion of blumea oil has caused a misalignment in the polymer chains of the cellulose acetate. Thus, a decrease in the tensile strength was observed for the blumea oil loaded nanofibers. The increase in fiber diameter causes a reduction in the porosity of the nanofiber mats. The blumea oil loaded nanofiber mats showed antibacterial efficacy against Escherichia coli and Staphylococcus aureus. The blumea oil showed antioxidant abilities against the DPPH solution. MVTR of the neat and blumea oil loaded nanofiber mats was in the range of 2450-1750 g/m²/day, which is adequate for the transport of air and moisture from the wound surface. Blumea oil loaded mats showed good cell viability ~92% for NIH 3T3 cells in more extended periods of incubation. A biphasic release profile was obtained, and the release followed the first-order kinetics depending upon the highest value of the coefficient of correlation R 2 (88.6%).

Polymer-Based Materials Loaded with Curcumin for Wound Healing Applications

Some of the currently used wound dressings have interesting features such as excellent porosity, good water-absorbing capacity, moderate water vapor transmission rate, high drug loading efficiency, and good capability to provide a moist environment, but they are limited in terms of antimicrobial properties. Their inability to protect the wound from microbial invasion results in wound exposure to microbial infections, resulting in a delayed wound healing process. Furthermore, some wound dressings are loaded with synthetic antibiotics that can cause adverse side effects on the patients. Natural-based compounds exhibit unique features such as good biocompatibility, reduced toxicity, etc. Curcumin, one such natural-based compound, has demonstrated several biological activities such as anticancer, antibacterial and antioxidant properties. Its good antibacterial and antioxidant activity make it beneficial for the treatment of wounds. Several researchers have developed different types of polymer-based wound dressings which were loaded with curcumin. These wound dressings displayed excellent features such as good biocompatibility, induction of skin regeneration, accelerated wound healing processes and excellent antioxidant and antibacterial activity. This review will be focused on the in vitro and in vivo therapeutic outcomes of wound dressings loaded with curcumin.

Electrospun Nanocomposites Containing Cellulose and Its Derivatives Modified with Specialized Biomolecules for an Enhanced Wound Healing

Wound healing requires careful, directed, and effective therapies to prevent infections and accelerate tissue regeneration. In light of these demands, active biomolecules with antibacterial properties and/or healing capacities have been functionalized onto nanostructured polymeric dressings and their synergistic effect examined. In this work, various antibiotics, nanoparticles, and natural extract-derived products that were used in association with electrospun nanocomposites containing cellulose, cellulose acetate and different types of nanocellulose (cellulose nanocrystals, cellulose nanofibrils, and bacterial cellulose) have been reviewed. Renewable, natural-origin compounds are gaining more relevance each day as potential alternatives to synthetic materials, since the former undesirable footprints in biomedicine, the environment, and the ecosystems are reaching concerning levels. Therefore, cellulose and its derivatives have been the object of numerous biomedical studies, in which their biocompatibility, biodegradability, and, most importantly, sustainability and abundance, have been determinant. A complete overview of the recently produced cellulose-containing nanofibrous meshes for wound healing applications was provided. Moreover, the current challenges that are faced by cellulose acetate- and nanocellulose-containing wound dressing formulations, processed by electrospinning, were also enumerated.

The biomedical potential of cellulose acetate/polyurethane nanofibrous mats containing reduced graphene oxide/silver nanocomposites and curcumin: Antimicrobial performance and cutaneous wound healing

In this study, nanofibrous scaffolds were prepared from polyurethane and cellulose acetate using electrospinning. Reduced graphene oxide/silver nanocomposites, rGO/Ag, were also used into the mats due to the strong antibacterial activity of rGO/Ag nanocomposites. In order to prevent the agglomeration of silver nanoparticles, AgNPs, the nanoparticles were decorated onto the reduced graphene oxide (rGO) sheets. Initially, Graphene oxide, briefly GO, was synthesized by the improved Hummer method. Then, nanocomposites of reduced graphene oxide were decorated with Ag and were fabricated via a green and facile hydrothermal method. Thereafter, the scaffold containing rGO/Ag nanocomposites, curcumin or both of them were prepared using the electrospinning method. The obtained scaffolds were characterized by scanning electron microscopy (SEM), contact angle, tensile analysis, porosity, and water vapor transmission rate (WVTR). 3-[4,5-Dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide assay, MTT, confirmed the biocompatibility of the composite nanofibers. The scaffolds were able to hinder both of the Gram-negative and Gram-positive bacteria through direct contact with them. In vivo histopathological studies indicated that the scaffold incorporated rGO/Ag nanocomposites and curcumin has the most effect on wound healing and can promote the healing rate of artificial wounds, which indicates the good biomedical potential of nanomaterial in wound healing.

Electrospinning of linezolid loaded PLGA nanofibers: effect of solvents on its spinnability, drug delivery, mechanical properties, and antibacterial activities

Objective: The choice of a desirable solvent/solvent system is fundamental for optimization of electrospinning by altering the rheological and electrostatic properties of the polymer solutions.Methods: The effects of the solvents and their properties on the viscosity and spinnability of the polymer solutions and the diameter, morphology, in vitro drug release, drug release mechanisms, antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA) and mechanical properties of electrospun poly-(d,l-lactide-co-glycolide) (PLGA) nanofibers were investigated. Dichloromethane (DCM), dimethylformamide (DMF), various ratios of DCM:DMF, and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) were used as solvents.Results: Although solutions containing DCM/DMF alone were not spinnable, different ratios of DCM:DMF and HFIP were determined as suitable solvents to produce nanofibers because of high enough conductivity, viscosity, and low enough surface tension of the solutions. The DCM:DMF ratio was highly effective on viscosity, nanofiber diameter, morphology, and linezolid release rate. The viscosity of HFIP containing solution was higher and the obtained nanofibers were thicker and smoother with better mechanical properties. The release of nanofibers containing HFIP at a concentration of 10% w/v PLGA was more prolonged than nanofibers containing DCM:DMF mixture. The effect of linezolid content on nanofibers was also investigated. As the amount of linezolid increased, nanofiber diameter and drug release increased and bead formation was observed. While antibacterial activity with nanofibers for which DCM:DMF was used, lasted for 13 days, it was extended to 16 days in nanofibers for which HFIP was used.Conclusions: Type and ratio of the solvent system affected viscosity and spinnability of the solutions, the average nanofiber diameter, morphology, in vitro activity and mechanical properties of the obtained electrospun nanofibers.

Preparation of antimicrobial and antioxidant gelatin/curcumin composite films for active food packaging application

The functional gelatin/curcumin composite film was prepared using an emulsifier, sodium dodecyl sulfate (SDS). The composite films were characterized using field emission scanning electron microscopy (FE-SEM) and Fourier transform infrared spectroscopy (FTIR). The FE-SEM test results showed that curcumin was evenly distributed in the gelatin polymer matrix to form a flexible composite film with a smooth surface. The addition of 1.5 % of curcumin improved the UV blocking effect by more than 99 % at a loss of 5.7 % of transparency compared to neat gelatin films. The addition of curcumin (up to 1 wt%) significantly improved mechanical and water vapor barrier properties. Also, the gelatin/curcumin composite films exhibited remarkable antimicrobial activity against foodborne pathogenic bacteria, E. coli and L. monocytogenes, and showed strong antioxidant activity comparable to ascorbic acid. Antibacterial and antioxidant gelatin/curcumin composite films with improved UV protection, water vapor barrier and mechanical properties have high potential in active food packaging applications.

Controlled curcumin release from nanofibers based on amphiphilic-block segmented polyurethanes

A series of biodegradable amphiphilic-block segmented polyurethanes (SPUs) are designed and synthesized based on di-block and tri-block macrodiols of polycaprolactone (PCL) and polyethylene glycol (PEG). Curcumin, as a model herbal antibacterial agent, is used due to its effective inhibitory action against Gram-positive and Gram-negative bacteria. Curcumin-loaded nanofibers, with 400-900 nm diameter range, have been prepared by electrospinning of SPUs. The synthesized SPUs can be used for wound dressing applications due to their excellent mechanical properties and higher hydrophilicity in comparison to PCL-based polyurethane. The elongation-at-break of tri-block SPU with PEG-PCL-PEG soft segments is 350% when produced as an electrospun mat and that for film is 1500%. In vitro release of curcumin, examined by UV-Vis spectroscopy, shows a steady release during 18 days. The inclusion of PEG chains in the soft segment increases the hydrophilicity and biodegradation rate of the electrospun mats compared to a PCL-based polyurethane, which eventually results in a higher curcumin release rate. The antibacterial activity of 50 mg of 10% curcumin-loaded SPU nanofibers is about 100% and 93% against Escherichia coli (E. coli ATCC: 25922) and Staphylococcus aureus (S. aureus ATCC: 6538), respectively. Nontoxic behavior of the scaffolds is evaluated through MTT assay against L929 mouse fibroblast cells. The results show that the synthesized SPUs can be used as a nanoscale sustained release carrier. The SPU with PEG-PCL-PEG soft segments is an excellent candidate for wound dressing in tissues undergoing large deformations during normal activities.

In vitro and in vivo evaluation of linezolid loaded electrospun PLGA and PLGA/PCL fiber mats for prophylaxis and treatment of MRSA induced prosthetic infections

In this study, it was aimed to formulate linezolid loaded electrospun PLGA and PCL fiber mats doing controlled drug release, to be used in the treatment and prophylaxis of the prosthesis related infections. The effect of PLGA concentration, PLGA to PCL ratio and the amount of linezolid on the fiber and mat properties were examined. Fiber diameter has been shown to increase with increasing amount of PLGA and linezolid. Increase in PLGA amount resulted in reduced linezolid release, whereas increase in linezolid amount resulted in increased drug release. All PLGA fiber mats have shown to have favorable encapsulation efficiency (≥73%) and mechanical properties. Encapsulation efficiency and the mechanical properties deteriorated with the addition of PCL to the formulations. PLGA fiber mats have shown a biphasic controlled release and in vitro antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA), pattern up to one month. The formulation selected as the optimum has been evaluated in vivo on the infected rats, which had prosthetic implantation after bone fracture. Consequently, it has been demonstrated microbiologically and histopathologically that a more efficient therapy and prophylaxis have been achieved with a 37-fold lower dose of linezolid.