Purification and biochemical characterization of a novel α-amylase from Bacillus licheniformis NH1

Purification and Characterization of Endogenous α-Amylase from Glutinous Rice Flour

Endogenous α-amylase activity is crucial for determining the end-use value of glutinous rice flour (GRF), and controlling it is a key goal in the milling process. Although the structure and properties of starch and protein in GRF have been extensively studied, there is little information on endogenous α-amylase in GRF. In this study, endogenous α-amylase isolated from GRF was purified and characterized. It was found to have a molecular weight of about 32 kDa, with the highest specific activity at 60 °C and a pH of 6.0. The enzyme is stable below 50 °C and in the pH range of 4.0-7.0. Its activity is Ca2⁺-independent but inhibited by Cu2⁺, Zn2⁺, Mg2⁺, Mn2⁺, and Ba2⁺. Its activity is also reduced by β-mercaptoethanol. The enzyme hydrolyzes amylopectin most efficiently. Circular dichroism spectroscopy showed that the enzyme contains 7.9% α-helix, 35.4% β-folding, 21.1% β-turning, and 35.9% random coils, with a Tm value of 63.68 °C. These results suggest that temperature control may be the best strategy for reducing amylase activity in dry-milled GRF, providing a new approach for the development of GRF dry-milling techniques.

Molecular Cloning, Characterization, and Application of a Novel Multifunctional Isoamylase (MIsA) from Myxococcus sp. Strain V11

A novel multifunctional isoamylase, MIsA from Myxococcus sp. strain V11, was expressed in Escherichia coli BL21(DE3). Sequence alignment revealed that MIsA is a typical isoamylase that belongs to glycoside hydrolase family 13 (GH 13). MIsA can hydrolyze the α-1,6-branches of amylopectin and pullulan, as well as the α-1,4-glucosidic bond in amylose. Additionally, MIsA demonstrates 4-α-D-glucan transferase activity, enabling the transfer of α-1,4-glucan oligosaccharides between molecules, particularly with linear maltooligosaccharides. The Km, Kcat, and Vmax values of the MIsA for amylopectin were 1.22 mM, 40.42 µmol·min-1·mg-1, and 4046.31 mM·min-1. The yields of amylopectin and amylose hydrolyzed into oligosaccharides were 10.16% and 11.70%, respectively. The hydrolysis efficiencies were 55%, 35%, and 30% for amylopectin, soluble starch, and amylose, respectively. In the composite enzyme hydrolysis of amylose, the yield of maltotetraose increased by 1.81-fold and 2.73-fold compared with that of MIsA and MTHase (MCK8499120) alone, respectively.

Exploring a novel GH13_5 α-amylase from Jeotgalibacillus malaysiensis D5T for raw starch hydrolysis

α-Amylase plays a crucial role in the industrial degradation of starch. The genus Jeotgalibacillus of the underexplored marine bacteria family Caryophanaceae has not been investigated in terms of α-amylase production. Herein, we report the comprehensive analysis of an α-amylase (AmyJM) from Jeotgalibacillus malaysiensis D5T (= DSM28777T = KCTC33550T). Protein phylogenetic analysis indicated that AmyJM belongs to glycoside hydrolase family 13 subfamily 5 (GH13_5) and exhibits low sequence identity with known α-amylases, with its closest counterpart being the GH13_5 α-amylase from Bacillus sp. KSM-K38 (51.05% identity). Purified AmyJM (molecular mass of 70 kDa) is stable at a pH range of 5.5-9.0 and optimally active at pH 7.5. The optimum temperature for AmyJM is 40 °C, where the enzyme is reasonably stable at this temperature. Similar to other α-amylases, the presence of CaCl2 enhanced both the activity and stability of AmyJM. AmyJM exhibited activity toward raw and gelatinized forms of starches and related α-glucans, generating a mixture of reducing sugars, such as glucose, maltose, maltotriose, maltotetraose, and maltopentaose. In raw starch hydrolysis, AmyJM exhibited its highest efficiency (51.10% degradation) in hydrolyzing raw wheat starch after 3-h incubation at 40 °C. Under the same conditions, AmyJM also hydrolyzed tapioca, sago, potato, rice, and corn raw starches, yielding 16.01-30.05%. These findings highlight the potential of AmyJM as a biocatalyst for the saccharification of raw starches, particularly those derived from wheat.

Biovalorizing agro-waste 'de-oiled rice bran' for thermostable, alkalophilic and detergent stable α-amylase production with its application as laundry detergent additive and textile desizer

The current research was concerned with the use of abundant agro-waste 'de-oiled rice bran (DORB)' as a sustainable substrate to produce α-amylase followed by several targets like process parameter optimization for augmented production and immobilization. In addition, we have also focused on investigating the application of DORB_amy as an efficient laundry detergent additive and textile desizer. The best production was recorded at pH 8.0 at 37 °C after 96 h incubation with 1.5 % (w/v) maltose. The DORB_amy has optimum activity at pH 9.0 at 60 °C with a Km and Vmax of 0.31 mg/mL and 222.22 mg/mL/min respectively. The catalytic performance of DORB_amy was further enhanced after immobilization in 3.0 % calcium alginate beads with 61.95 ± 0.17 % of operational stability after five continuous reaction cycles. The findings showed excellent performance of DORB_amy in cleaning starchy stains. The washing performance of enzyme and detergent together was better than their individual performance which increases the application of α-amylase as a laundry detergent additive. About 17.34 % weight loss or desizing was done by DORB_amy with an 8-9 TEGEWA rating. The reported biochemical features like thermostability, alkalophilic and detergent-stable nature of the DORB_amy make it industrially fit with great significance.

Purification and characterization of amylases from three freshwater fish species providing new insight application as enzyme molecular markers for zymography

Purification of amylases from digestive tracts of three freshwater fish species with Q-Sepharose Fast Flow and Sephacryl S-200 columns displayed two isoforms of amylases from Osteochilus hasselti (O1, O2) and three isoforms of those from both Hampala dispar (UB, H1, H2) and Puntioplites proctozystron (P1, P2, P3). The optimum pH values displayed at 7.0 and 8.0, while the optimum temperatures revealed at 40 and 50 °C. Almost isoenzyme activities were activated by NaCl and CaCl2, whereas EDTA and SDS strongly inhibited all enzymatic activities. Verification with an atomic absorption spectrophotometry exhibited the presence of Ca2+ ions in the range of 0.02-13.53 ppm per mg protein indicating that amylases are Ca2+ dependent. Molecular weight analysis revealed 12 to 147 kDa. The UB, O1, and H2 amylases with appropriate molecular masses of 64, 49, and 25 kDa validated with LC-MS/MS were selected. Three certain enzymes revealed high stability in a sample buffer after five cycles of freeze-thawing process upon storage at - 20 °C for 12 weeks. No protein degradation was observed on polyacrylamide gel, and the enzymes still displayed sharp and clear bands on zymograms. The result suggested that the purified fish amylases, which expressed high activities and stabilities, were potentially used as enzyme molecular weight markers for zymography.

Purification and biochemical characterization of α- amylase from Aspergillus tamarii MTCC5152

The purification and biochemical characterization of the extracellular alpha amylase from A.tamarii MTCC5152 were studied. The combined use of ion exchange and gel filtration chromatographic methods were used for purification studies. The specific activity was significantly increased (33 fold) and 19.41 fold purification of the enzyme α-amylase with 24% yield was achieved. The enzyme had an optimal pH of 6.5 and exhibited its highest activity at 55 °C. It is active over a wide range of pH 5-7 at room temperature. The enzyme is relatively stable in the temperature range of 25-35 °C for a period of 4 h hence, more suitable for industrial applications. Km and Vmax value of the enzyme was to be 5.882 mg/mL and 0.803 mg/mL/min respectively using starch as the substrate. The purified protein showed a single band on native and SDS PAGE and the molecular weight was found to be 31 kDa. Starch zymogram also revealed one clear zone of amylolytic activity which corresponded to the band obtained with native PAGE and SDS/PAGE. The characterization studies showed that the enzyme activity is inhibited by Ca2+, Mn2+, Hg2+, Fe2+.

Activity-Based Screening of Soil Samples from Nyingchi, Tibet, for Amylase-Producing Bacteria and Other Multifunctional Enzyme Capacities

Despite the interest in Tibetan soil as a promising source of functional enzymes with potential biotechnological applications, few studies have considered the screening and identification of amylase producing bacteria from Tibetan soil. Amylase has many applications in the food and feed industries, textile and biofuel production, and biomedical engineering. The area of amylase with specific properties is attracting growing attention because of its better application to various industrial conditions. This study aims to screen and identify amylase-producing strains from soil samples collected in Nyingchi, Tibet, and then explore whether the bacterial isolates are superior for unique enzymes. In this paper, a total of 127 amylase producing bacteria were isolated by activity-based screening of six Tibetan soil samples. The 16S rRNA gene survey then identified four major phyla, namely, firmicutes, bacteroidetes, proteobacteria, and actinobacteria, which were differentiated into twelve genera with a dominance of Bacillus (67.72%), followed by Pseudomonas (8.66%). Microbial diversity analysis revealed that the amylase-producing bacterial community of the Kadinggou forest soil sample showed the best variety (the Simpson index was 0.69 and the Shannon index was 0.85). The amylase activity assay of the bacterial isolates showed a mean of 0.66 U/mL at 28°C and pH 5.2. Based on the effect of temperatures and pHs on amylase activity, several bacterial isolates can produce thermophilic (50°C), psychrophilic (10°C), acidophilic (pH 4.2), and alkaliphilic (pH 10.2) amylases. Furthermore, four bacterial isolates were screened for amylase, protease, and esterase activities, which indicated multifunctional enzyme capacities. The present study is expected to contribute to our understanding of Tibetan microbial resources and their potential for scientific research and industrial applications.

Purification and Characterization of Thermostable α-Amylase from Soil Bacterium Bacillus sp

BACKGROUND

Amylases are used in several industrial and biotechnological sectors, including those producing textiles, detergents, paper and bakery products.

OBJECTIVE

This study aimed to purify an industrially important α-amylase from Bacillus sp. For this purpose, a single and rapid α-amylase purification was performed using the starch affinity method.

METHODS

Characterization of the purified enzyme was determined by investigating temperature, pH stability, detergents, and metal ions.

RESULTS

The purification coefficient of 29.8-fold with a yield of 9.2% was found. The molecular weight of the purified α-amylase was determined to be 53 kDa by SDS-PAGE, and thermostability was confirmed with 100% activity at 30ºC and 40ºC after 1 h. The purified enzyme was stable over a wide range of pH values, with optimum activity at pH 6.0, 7.0 and 8.0 after 2 h. The study also investigated the effects of the metal ions and detergents on the purified amylase and found that Mg2+ and Ca2+ ions were the activators of the enzyme, while Zn²⁺, Co²⁺ and Na+ ions decreased the activity. Furthermore, Hg2+ indicated complete inhibition of amylase activity. The detergents Triton X-100 and Tween 20 increased the α-amylase activity, while sodium dodecyl sulfate inhibited the activity.

CONCLUSION

The purified α-amylase obtained from Bacillus sp. is considered to be environmentally friendly, can be processed in a short time, and has a low cost.

Novel Thermotolerant Amylase from Bacillus licheniformis Strain LB04: Purification, Characterization and Agar-Agarose

This study analyzed the thermostability and effect of calcium ions on the enzymatic activity of α-amylase produced by Bacillus licheniformis strain LB04 isolated from Espinazo Hot springs in Nuevo Leon, Mexico. The enzyme was immobilized by entrapment on agar-agarose beads, with an entrapment yield of 19.9%. The identification of the bacteria was carried out using 16s rDNA sequencing. The enzyme was purified through ion exchange chromatography (IEX) in a DEAE-Sephadex column, revealing a protein with a molecular weight of ≈130 kDa. The enzyme was stable at pH 3.0 and heat stable up to 80 °C. However, the optimum conditions were reached at 65 °C and pH 3.0, with a specific activity of 1851.7 U mg⁻¹ ± 1.3. The agar-agarose immobilized α-amylase had a hydrolytic activity nearly 25% higher when compared to the free enzyme. This study provides critical information for the understanding of the enzymatic profile of B. licheniformis strain LB04 and the potential application of the microorganisms at an industrial level, specifically in the food industry.

Amylases from thermophilic bacteria: structure and function relationship

Amylases hydrolyze starch to diverse products including dextrins and progressively smaller polymers of glucose units. Thermally stable amylases account for nearly 25% of the enzyme market. This review highlights the structural attributes of the α-amylases from thermophilic bacteria. Heterologous expression of amylases in suitable hosts is discussed in detail. Further, specific value maximization approaches, such as protein engineering and immobilization of the amylases are discussed in order to improve its suitability for varied applications on a commercial scale. The review also takes into account of the immobilization of the amylases on nanomaterials to increase the stability and reusability of the enzymes. The function-based metagenomics would provide opportunities for searching amylases with novel characteristics. The review is expected to explore novel amylases for future potential applications.

Molecular strategies to enhance stability and catalysis of extremophile-derived α-amylase using computational biology

α-Amylase is the most significant glycoside hydrolase having applications in various industries. It cleaves the α,1-4 glucosidic linkages of polysaccharides like starch, glycogen to yield a small polymer of glucose in α-anomeric configuration. α-Amylase is produced by all the three domains of life but microorganisms are preferred sources for industrial-scale production due to several advantages. Enormous studies and research have been done in this field in the past few decades. Still, it is requisite to work on enzyme stability and catalysis, as it loses its functionality in extreme. As the enzyme loses its structural and catalytic property under extreme environmental conditions, it is mandatory to confer some potential strategies for enhancing enzyme behaviour in such conditions. This limitation of an enzyme can be overcome up to some extent by extremophiles. They serve as an excellent source of α-amylase with outstanding features. This review is an attempt to encapsulate some structure-based strategies for improving enzyme behaviour thereby enabling researchers to selectively amend any of the strategies as per requirement during upstream and downstream processing for higher enzyme yield and stability. Thus, it will provide some cutting-edge strategies for tailoring α-amylase producing organism and enzyme with the help of several computational biology tools.

Aspects and Recent Trends in Microbial α-Amylase: a Review

α-Amylases are the oldest and versatile starch hydrolysing enzymes which can replace chemical hydrolysis of starch in industries. It cleaves the α-(1,4)-D-glucosidic linkage of starch and other related polysaccharides to yield simple sugars like glucose, maltose and limit dextrin. α-Amylase covers about 30% shares of the total enzyme market. On account of their superior features, α-amylase is the most widely used among all the existing amylases for hydrolysis of polysaccharides. Endo-acting α-amylase of glycoside hydrolase family 13 is an extensively used biocatalyst and has various biotechnological applications like in starch processing, detergent, textile, paper and pharmaceutical industries. Apart from these, it has some novel applications including polymeric material for drug delivery, bioremediating agent, biodemulsifier and biofilm inhibitor. The present review will accomplish the research gap by providing the unexplored aspects of microbial α-amylase. It will allow the readers to know about the works that have already been done and the latest trends in this field. The manuscript has covered the latest immobilization techniques and the site-directed mutagenesis approaches which are readily being performed to confer the desirable property in wild-type α-amylases. Furthermore, it will state the inadequacies and the numerous obstacles coming in the way of its production during upstream and downstream steps and will also suggest some measures to obtain stable and industrial-grade α-amylase.

Molecular cloning and biochemical characterization of a trehalose synthase from Myxococcus sp. strain V11

The tresI gene of Myxococcus sp. strain V11 was cloned, and found to encode a trehalose synthase comprising 551 amino acids. The deduced molecular weight of the encoded TreS I protein 64.7 kDa and the isoelectric point (pI) was predicted to be 5.6. The catalytic cleft consists of the Asp202-Glu244-Asp310 catalytic triad and additional conserved residues. The recombinant (His)₆-tag enzyme was expressed in Escherichia coli BL21(DE3) and purified by Ni²⁺-affinity chromatography, resulting in a specific activity of up to 172.7 U/mg. TLC and HPLC results confirmed that rTreS I can convert maltose into trehalose, with a yield of 61%. The K_M and V_max values of recombinant TreS I for maltose were 0.62 mM and 25.5 mM min^-1 mg^-1 protein, respectively. TreS I was optimally active at 35° and stable at temperatures of <25 °C. TreS I was stable within a narrow range of pH values, from 6.0 to 7.0. The enzymatic activity was slightly stimulated by Mg²⁺ and strongly inhibited by Fe³⁺, Co²⁺ and Cu²⁺. TreS I was also strongly inhibited by SDS and weakly by EDTA and TritonX-100.

Molecular analysis of Bacillus velezensis KB 2216, purification and biochemical characterization of alpha-amylase

Alpha-amylase producing strain KB 2216 was identified as Bacillus velezensis. The growth pattern showed that 72 h is the optimum incubation period of amylase production, which is a stationary period for the strain. By the purification process, maximum alpha-amylase activity was achieved up to 418.25 U/mL at 72 h of incubation, which was purified with 4.74 folds, 4230.32 U/mg specific activity, with 31.35% yield. The strain was found to produce an oligomeric alpha-amylase, namely Amy3. Amy3 was a trimeric macromolecule of 195 kDa with 62, 64, and 66 kDa subunits, as revealed by zymogram and SDS PAGE analyses. Amy3 was highly active at 55 °C and pH 5.5. It had shown the highest stability at pH 5.0-5.5 and between 0 ̊C and 4 ̊C. It did not require any metal cofactors, but it was inhibited by Ag²⁺, Hg²⁺ and Cd²⁺ divalent cations. Glucose and maltose were shown to be the end products of soluble starch digestion by Amy3. These interesting properties of Amy3 may be useful for many biotechnological applications in the future.

Purification and characterization of thermostable α-amylase produced from Bacillus licheniformis So-B3 and its potential in hydrolyzing raw starch

AIMS

This work was achieved to obtain the optimum culture conditions of the thermostable alpha-amylase produced by thermophilic Bacillus licheniformis SO-B3. Furthermore, the α-amylase was purified and then characterized, and also its kinetic parameters were determined.

MATERIALS AND METHODS

A new thermotolerant bacteria called Bacillus licheniformis SO-B3 employed in this work was isolated from a sample of thermal spring mud in Şırnak (Meyremderesi). Several parameters such as the impact of temperature, time, and pH on enzyme production were examined. Thin-Layer Chromatography (TLC) was employed to analyze the end-products of soluble starch hydrolysis, and the utilization of purified α-amylase in the clarification of unripe apple juices was studied.

KEY FINDINGS

The highest enzyme production conditions were determined as 35 °C, 36th hour, and pH 7.0. Thermostable α-amylase was purified by 70% ammonium sulfate precipitation, DEAE-cellulose ion-exchange chromatography, and dialysis, with a 51-purification fold and 30% yield recovery. The K_m and V_max values for this enzyme were 0.004 mM and 3.07 μmol min^-1 at 70 °C, respectively. The α-amylase's molecular weight was found as 74 kDa. In addition, α-amylase showed a good degradation rate for raw starch.

SIGNIFICANCE

It was hypothesized that Bacillus licheniformis SO-B3 could be used as an α-amylase source. These findings displayed that purified enzyme could be utilized in fruit juice industries for clarification of apple juice and raw starch hydrolyzing.

Purification, biochemical, and molecular characterization of a novel extracellular thermostable and alkaline α-amylase from Tepidimonas fonticaldi strain HB23

The present study investigated the purification, biochemical, and molecular characterization of a novel thermostable α-amylase (TfAmy48) from Tepidimonas fonticaldi strain HB23. MALDI-TOF/MS analysis indicated that the purified enzyme is a monomer with a molecular mass of 48,138.10 Da. The results from amino-acid sequence analysis revealed high homology between the 25 NH₂-terminal residues of TfAmy48 and those of Gammaproteobacteria α-amylases. The optimum pH and temperature values for α-amylase activity were pH 8 and 80 °C, respectively. Thin-layer chromatography (TLC) analysis showed that the final hydrolyzed products of the enzyme from soluble potato starch were maltopentaose, maltose, and maltotriose, which indicate that TfAmy48 possessed an endo-acting pattern. Compared to Termamyl®300 L, TfAmy48 showed extreme stability and tolerance towards organic solvents and excellent compatibility with some commercial laundry detergents. These proprieties make TfAmy48 enzyme a potential candidate as a cleaning bioadditive in detergent composition. The Tfamy48 gene encoding TfAmy48 was cloned, sequenced, and heterologously-expressed in the extracellular fraction of Escherichia coli strain BL21(DE3)pLysS. The biochemical properties of the extracellular purified recombinant enzyme (rTfAmy48) were similar to those of native one. The highest sequence identity value (97%) was obtained with PsAmy1 α-amylase from Pseudomonas sp. strain KFCC10818, with only 16 amino-acid (aa) residues of difference.

Secretion of the recombination α-amylase in Escherichia coli and purification by the gram-positive enhancer matrix (GEM) particles

α-Amylases are important enzymes in industry. A recombinant α-amylase with a secretion signal peptide and an AcmA tag was expressed in Escherichia coli to improve the yield. The induction concentrations were optimized, and the temperature had a significant influence on soluble expression and secretion. A visible band could be obtained when the induction was conducted at 16 °C. The gram-positive enhancer matrix (GEM) particles could separate and purify the recombinant α-amylase with the AcmA tag, and no visible band could be seen in the culture even after the culture was concentrated ten times. The solution and concentration of the recombinant α-amylase could be adjusted by GEM particles. The recombinant untagged α-amylase was obtained after digestion. The α-amylase was characterized. The recombinant α-amylase was a thermophilic enzyme with a broad pH tolerance. In addition, the enzyme activity of the recombinant α-amylase was independent of Ca²⁺. The recombinant α-amylase contained the OmpA signal peptide and the AcmA tag and was expressed and purified quickly and easily.

Influence of Calcium Ions on the Thermal Characteristics of α-amylase from Thermophilic Anoxybacillus sp. GXS-BL

BACKGROUND

α-Amylases are starch-degrading enzymes and used widely, the study on thermostability of α-amylase is a central requirement for its application in life science and biotechnology.

OBJECTIVE

In this article, our motivation is to study how the effect of Ca2+ ions on the structure and thermal characterization of α-amylase (AGXA) from thermophilic Anoxybacillus sp.GXS-BL.

METHODS

α-Amylase activity was assayed with soluble starch as the substrate, and the amount of sugar released was determined by DNS method. For AGXA with calcium ions and without calcium ions, optimum temperature (Topt), half-inactivation temperature (T50) and thermal inactivation (halflife, t1/2) was evaluated. The thermal denaturation of the enzymes was determined by DSC and CD methods. 3D structure of AGXA was homology modeled with α-amylase (5A2A) as the template.

RESULTS

With calcium ions, the values of Topt, T50, t1/2, Tm and ΔH in AGXA were significantly higher than those of AGXA without calcium ions, showing calcium ions had stabilizing effects on α-amylase structure with the increased temperature. Based on DSC measurements AGXA underwent thermal denaturation by adopting two-state irreversible unfolding processes. Based on the CD spectra, AGXA without calcium ions exhibited two transition states upon unfolding, including α- helical contents increasing, and the transition from α-helices to β-sheet structures, which was obviously different in AGXA with Ca2+ ions, and up to 4 Ca2+ ions were located on the inter-domain or intra-domain regions according to the modeling structure.

CONCLUSION

These results reveal that Ca2+ ions have pronounced influences on the thermostability of AGXA structure.

Gene cloning, expression, molecular modeling and docking study of the protease SAPRH from Bacillus safensis strain RH12

The sapRH gene, which encodes the serine alkaline protease SAPRH, from Bacillus safensis RH12, was isolated and its DNA sequence was determined. The deduced amino-acid sequence showed strong homology with other Bacillus proteases. The highest sequence identity value (97%) was obtained with SAPB from B. pumilus CBS, with only 9 amino-acids of difference. The region, encoding SAPRH was heterologously expressed in E. coli BL21-AI™ cells using GATEWAY™ pDEST™17 expression-vector. The recombinant (His)₆-tag enzyme (His₆-rSAPRH) was purified in a single affinity chromatography step and its biochemical properties were determined and compared to those of SAPRH and rSAPB. Interestingly, His₆-rSAPRH showed improved thermostability compared to SAPRH and rSAPB. The molecular dynamics of SAPRH compared to SAPB revealed a more thermostable structure, thus confirming the in vitro results showing that His₆-rSAPRH has a t_1/2 of 120 min against 90 and 30 min for SAPRH and rSAPB, respectively, at 70 °C and different kinetic parameters to synthetic peptides. The docking simulations data allow in getting an insight into the involvement of some key amino-acids in substrate binding and account for the selectivity. Overall, this is the first report of a sapRH gene cloned from B. safensis which can be a promising potential candidate for future applications in detergent formulations.

Production, purification and characterization of raw starch hydrolyzing thermostable acidic α-amylase from hot springs, India

Alpha-amylase is an important hydrolytic enzyme used for various industrial processes. In the present study, Geobacillus bacterium (K1C), producing a thermostable α-amylase was isolated from Manikaran hot springs, India. We have purified and characterized the biochemical properties of α-amylase. The optimum temperature and pH for α-amylase activity was 80 °C and pH 6.0 respectively. The far-UV CD spectra of the enzyme indicated the presence of random coil conformation and showed an intermediate phase during temperature-induced unfolding. In the presence of substrate, thermostability of the α-amylase was increased as 50% initial activity was retained at 70 °C for 6 h and at 80 °C for 2 h. Moreover, the enzyme also showed remarkable pH stability as 90% of the initial activity was retained even after 48 h of incubation at pH 5.0, 6.0 and 7.0. Interestingly, amylase activity of the purified enzyme was Ca²⁺independent, whereas the complete inhibition of activity was observed in the presence of Cu²⁺, Pb²⁺, and Hg²⁺. The purified α-amylase was stable in the presence of detergents, organic solvents and Proteinase K. Furthermore, it exhibited the ability to hydrolyze raw starches (e.g. rice, wheat, corn, potato) efficiently; thus this enzyme has the potential to be used for industrial applications.

Purification and characterization of novel thermostable and Ca-independent α-amylase produced by Bacillus amyloliquefaciens BH072

In the present study, a novel α-amylase produced by Bacillus amyloliquefaciens BH072 was purified and characterized. The molecular weight of purified α-amylase was approximately 68 kDa, determined by Sodium Dodecyl Sulfate Polyacrylamide Gel Electrophoresis (SDS-PAGE) and ten amino acid of N-terminal was NSGLNGYLTH. The kinetic parameters K_m and V_max were 4.27 ± 0.21 mg/mL and 987.34 ± 23.34 U/mg, respectively. Purified α-amylase showed maximal activity at pH 7 and 60 °C. Enzyme remained stable in pH range 6.0-7.0 and 50-80 °C. The activity of the α-amylase was Ca²⁺ independent and stability in the presence of surfactant, oxidizing and bleaching agents. The β-mercaptoethanol and EDTA greatly enhanced and reduced α-amylase activity, respectively. This enzyme has high hydrolysis rate toward corn, wheat and potato starch and hydrolyzes soluble starch to glucose, maltose, maltotriose and maltotetraose, indicating that the α-amylase represents a promising candidate for applications in the food industry.

Purification and biochemical characterization of a thermostable and acid-stable alpha-amylase from Bacillus licheniformis B4-423

Novel thermostable amylase need to be continuously explored with the improvement of industrial requirements. A new acidophilic and thermostable amylase producing bacterium isolated from spring was identified as Bacillus strain on the basis of 16S rDNA. The amylase was purified by ammonium sulphate precipitation, gel chromatography and anion exchange chromatography. SDS-PAGE revealed that the enzyme was monomeric with a molecular weight of 58 kDa. The amylase exhibited optimal activity at pH 5.0 and temperature 100 °C. Then the enzyme showed high stability in pH ranges 4.0-10.0 and more than 90% of maximal activity was found from 20 °C to 80 °C. Apart from good stability toward SDS and non-ionic detergent, the purified enzyme exhibited high compatibility with some inhibitors such as urea and EDTA. The results demonstrated the stability of the enzyme in different organic solvents. Moreover, we determined the amylase gene, compared the structure with α-amylase BAA and BLA and found some thermostability determinants in our enzyme. Overall, presenting various properties were including high thermostability, Ca²⁺-independency, broad temperature and pH profiles, organic-solvent tolerance as well as excellent stability with detergents. Such characteristics have not been reported for this type of enzyme, and the α-amylase will be a suitable candidate in industrial fields.

Molecular improvements in microbial α-amylases for enhanced stability and catalytic efficiency

α-Amylases is one of the most important industrial enzyme which contributes to 25% of the industrial enzyme market. Though it is produced by plant, animals and microbial source, those from microbial source seems to have potential applications due to their stability and economic viability. However a large number of α-amylases from different sources have been detailed in the literature, only few numbers of them could withstand the harsh industrial conditions. Thermo-stability, pH tolerance, calcium independency and oxidant stability and starch hydrolyzing efficiency are the crucial qualities for α-amylase in starch based industries. Microbes can be genetically modified and fine tuning can be done for the production of enzymes with desired characteristics for specific applications. This review focuses on the native and recombinant α-amylases from microorganisms, their heterologous production and the recent molecular strategies which help to improve the properties of this industrial enzyme.

Purification, Characterization of Amylase from Indigenously Isolated Aureobasidium pullulans Cau 19 and Its Bioconjugates with Gold Nanoparticles

The amylase from Aureobasidium pullulans Cau 19 was purified by ammonium sulfate precipitation and Sephadex G-100 chromatography with a 9.25-fold increase in specific activity as compared to crude enzyme. Km and turn over values of the enzyme were 6.25 mg/mL and 5.0 × 10²/min, respectively. Effect of different metal ions on the purified enzyme was investigated; 1 mM calcium (Ca) and cobalt (Co) enhanced enzyme activity by twofold; copper (Cu) had no effect on the activity of the enzyme. Mercury (Hg) 1 mM caused 90% inactivation whereas iron (Fe) and manganese (Mn) caused 10 to 16% inhibition. Amylase from A. pullulans Cau 19 was bioconjugated to gold nanoparticles synthesized using the biomass of A. pullulans Cau 19. Fourier transform infrared spectroscopy confirmed the conjugation of the enzyme to the gold nanoparticles. Though, only 20% of the added enzyme was adsorbed/conjugated on gold nanoparticles, 80% of the adsorbed activity could be estimated in the assay. The conjugated enzyme exhibited better tolerance to a broad pH range of 3.0-9.0 and higher temperatures compared with native enzyme.

Bacterial and Archaeal α-Amylases: Diversity and Amelioration of the Desirable Characteristics for Industrial Applications

Industrial enzyme market has been projected to reach US$ 6.2 billion by 2020. Major reasons for continuous rise in the global sales of microbial enzymes are because of increase in the demand for consumer goods and biofuels. Among major industrial enzymes that find applications in baking, alcohol, detergent, and textile industries are α-amylases. These are produced by a variety of microbes, which randomly cleave α-1,4-glycosidic linkages in starch leading to the formation of limit dextrins. α-Amylases from different microbial sources vary in their properties, thus, suit specific applications. This review focuses on the native and recombinant α-amylases from bacteria and archaea, their production and the advancements in the molecular biology, protein engineering and structural studies, which aid in ameliorating their properties to suit the targeted industrial applications.

Biochemical features and kinetic properties of α-amylases from marine organisms

Marine organisms have the ability of producing enzymes with unique properties compared to those of the same enzymes from terrestrial organisms. α-Amylases are among the most important extracellular enzymes found in various groups of organisms such as plants, animals and microorganisms. They play important roles in their carbohydrates metabolism of each organism. Microbial production of α-amylases is more effective than other sources of the enzyme. Many microorganisms are known to produce α-amylase including bacteria, yeasts, fungi and actinomycetes. However, enzymes from fungal and bacterial sources have dominated applications in industrial sectors. This review deals with what is known about the kinetics, biochemical properties and applications of these enzymes that have only been found in them and not in other α-amylases, and discussing their mechanistic and regulatory implications.

Cloning, enhanced expression and characterization of an α-amylase gene from a wild strain in B. subtilis WB800

A Bacillus strain with high productivity of α-amylase isolated from a starch farm was identified as Bacillus amyloliquefaciens. The α-amylase encoding gene amy1 was cloned into pMD18-T vector and amplified in E. coli DH5α. Shuttle vector pP43MNX was reconstructed to obtain vector pP43X for heterologous expression of the α-amylase in B. subtilis WB800. Recombinant enzyme was sufficiently purified by precipitation, gel filtration and anion exchange with a specific activity of 5566 U/mg. The α-amylase sequence contains an open reading frame of 1545 bp, which encodes a protein of 514 amino acid residues with a predicted molecular mass of 58.4 kDa. The enzyme exhibited maximal activity at pH 6.0 and 60 °C. Catalytic efficiency of the recombinant α-amylase was inhibited by Hg(2+), Pb(2+) and Cu(2+), but stimulated by Li(+), Mn(2+) and Ca(2+). The purified enzyme showed decreased activity toward detergents (SDS, Tween 20 and Triton X-100). Compared with production by the wild strain, there was a 1.48-fold increase in the productivity of α-amylase in recombinant B. subtilis WB800.

Purification and Characterization of a Polyextremophilic α -Amylase from an Obligate Halophilic Aspergillus penicillioides Isolate and Its Potential for Souse with Detergents

An extracellular α-amylase from the obligate halophilic Aspergillus penicillioides TISTR3639 strain was produced and enriched to apparent homogeneity by ammonium sulfate precipitation and Sephadex G100 gel filtration column chromatography. The mass of the purified amylase was estimated to be 42 kDa by SDS-PAGE. With soluble starch as the substrate it had a specific activity of 118.42 U · mg(-1) and Vmax and Km values of 1.05 µmol · min(-1) · mg(-1) and 5.41 mg · mL(-1), respectively. The enzyme was found to have certain polyextremophilic characteristics, with an optimum activity at pH 9, 80 °C, and 300 g · L(-1) NaCl. The addition of CaCl2 at 2 mM was found to slightly enhance the amylase activity, while ZnCl2, FeCl2, or EDTA at 2 mM was strongly or moderately inhibitory, respectively, suggesting the requirement for a (non-Fe(2+) or Zn(2+)) divalent cation. The enzyme retained more than 80% of its activity when incubated with three different laundry detergents and had a better performance compared to a commercial amylase and three detergents in the presence of increasing NaCl concentrations up to 300 g · L(-1). Accordingly, it has a good potential for use as an α-amylase in a low water activity (high salt concentration) and at high pH and temperatures.

Purification and characterization of a highly efficient calcium-independent α-amylase from Talaromyces pinophilus 1-95

Alpha-amylase is a very important enzyme in the starch conversion process. Most of the α-amylases are calcium-dependent and exhibit poor performance in the simultaneous saccharification and fermentation process of industrial bioethanol production that uses starch as feedstock. In this study, an extracellular amylolytic enzyme was purified from the culture broth of newly isolated Talaromyces pinophilus strain 1-95. The purified amylolytic enzyme, with an apparent molecular weight of 58 kDa on SDS-PAGE, hydrolyzed maltopentaose, maltohexaose, and maltoheptaose into mainly maltose and maltotriose and minor amount of glucose, confirming the endo-acting mode of the enzyme, and hence, was named Talaromyces pinophilus α-amylase (TpAA). TpAA was most active at pH 4.0-5.0 (with the temperature held at 37°C) and 55°C (at pH 5.0), and stable within the pH range of 5.0-9.5 (at 4°C) and below 45°C (at pH 5.0). Interestingly, the Ca2+ did not improve its enzymatic activity, optimal temperature, or thermostability of the enzyme, indicating that the TpAA was Ca2+-independent. TpAA displayed higher enzyme activity toward malto-oligosaccharides and dextrin than other previously reported α-amylases. This highly active Ca2+-independent α-amylase may have potential applications in starch-to-ethanol conversion process.

AmyM, a Novel Maltohexaose-Forming α-Amylase from Corallococcus sp. strain EGB

A novel α-amylase, AmyM, was purified from the culture supernatant of Corallococcus sp. strain EGB. AmyM is a maltohexaose-forming exoamylase with an apparent molecular mass of 43 kDa. Based on the results of matrix-assisted laser desorption ionization-time of flight mass spectrometry and peptide mass fingerprinting of AmyM and by comparison to the genome sequence of Corallococcus coralloides DSM 2259, the AmyM gene was identified and cloned into Escherichia coli. amyM encodes a secretory amylase with a predicted signal peptide of 23 amino acid residues, which showed no significant identity with known and functionally verified amylases. amyM was expressed in E. coli BL21(DE3) cells with a hexahistidine tag. The signal peptide efficiently induced the secretion of mature AmyM in E. coli. Recombinant AmyM (rAmyM) was purified by Ni-nitrilotriacetic acid (NTA) affinity chromatography, with a specific activity of up to 14,000 U/mg. rAmyM was optimally active at 50°C in Tris-HCl buffer (50 mM; pH 7.0) and stable at temperatures of <50°C. rAmyM was stable over a wide range of pH values (from pH 5.0 to 10.0) and highly tolerant to high concentrations of salts, detergents, and various organic solvents. Its activity toward starch was independent of calcium ions. The Km and Vmax of recombinant AmyM for soluble starch were 6.61 mg ml(-1) and 44,301.5 μmol min(-1) mg(-1), respectively. End product analysis showed that maltohexaose accounted for 59.4% of the maltooligosaccharides produced. These characteristics indicate that AmyM has great potential in industrial applications.

An exceptionally cold-adapted alpha-amylase from a metagenomic library of a cold and alkaline environment

A cold-active α-amylase, AmyI3C6, identified by a functional metagenomics approach was expressed in Escherichia coli and purified to homogeneity. Sequence analysis showed that the AmyI3C6 amylase was similar to α-amylases from the class Clostridia and revealed classical characteristics of cold-adapted enzymes, as did comparison of the kinetic parameters K m and k cat to a mesophilic α-amylase. AmyI3C6 was shown to be heat-labile. Temperature optimum was at 10-15 °C, and more than 70 % of the relative activity was retained at 1 °C. The pH optimum of AmyI3C6 was at pH 8-9, and the enzyme displayed activity in two commercial detergents tested, suggesting that the AmyI3C6 α-amylase may be useful as a detergent enzyme in environmentally friendly, low-temperature laundry processes.